Готові списки джерел за темами / Cooling dynamics

Добірка наукової літератури з теми "Cooling dynamics"

Автор: Grafiati
Опубліковано: 6 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Cooling dynamics".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Cooling dynamics"

1

Horiuchi, Noriaki. "Cooling dynamics." Nature Photonics 10, no. 12 (November 29, 2016): 751. http://dx.doi.org/10.1038/nphoton.2016.246.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

BALMFORTH, N. J., R. V. CRASTER, and R. SASSI. "Dynamics of cooling viscoplastic domes." Journal of Fluid Mechanics 499 (January 25, 2004): 149–82. http://dx.doi.org/10.1017/s0022112003006840.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

HOANG, VO VAN, and SUHK KUN OH. "COOLING RATE EFFECTS ON DYNAMICS IN SUPERCOOLED Al2O3." International Journal of Modern Physics B 20, no. 08 (March 30, 2006): 947–67. http://dx.doi.org/10.1142/s0217979206033589.

Повний текст джерела
Анотація:
The cooling rate effects in supercooled Al 2 O 3 have been investigated by Molecular Dynamics (MD) method. Simulations were done in the basic cube under periodic boundary conditions containing 3000 ions with Born–Mayer type pair potentials. The temperature of the system was decreased linearly in time as T(t)=T0–γt, where γ is the cooling rate. The cooling rate dependence of density, thermal expansion coefficient and enthalpy of the system was found. Structure of amorphous Al 2 O 3 model at the temperature of 0 K was in good agreement with Lamparter's experimental data. The cooling rate dependence of the dynamical heterogeneities in supercooled states has been studied through the comparison of the partial radial distribution functions (PRDFs) for the 10% most mobile or immobile particles with the corresponding mean PRDFs in the models. Also, cooling rate effects on the cluster size distributions of the most mobile or immobile particles have been obtained. Calculations show that the cooling rate effects on the dynamical heterogeneities are pronounced. Finally, the evolution of structural defects and cluster size distributions of the most mobile or immobile particles in the system upon cooling has been studied and presented.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Park, Chanwoo, Jaewoo Seol, Ali Aldalbahi, Mostafizur Rahaman, Alexander L. Yarin, and Sam S. Yoon. "Drop impact phenomena and spray cooling on hot nanotextured surfaces of various architectures and dynamic wettability." Physics of Fluids 35, no. 2 (February 2023): 027126. http://dx.doi.org/10.1063/5.0139960.

Повний текст джерела
Анотація:
Spray cooling has been used to quench metal slabs during casting, cool nuclear reactors, suppress accidental fires, and remove heat from high-power density electronics. In particular, the miniaturization of electronic devices inevitably results in an increased power density or heat flux on the microelectronics surfaces and poses a threat of a thermal shutdown of such devices when cooling is insufficient. Surface nanotexturing effectively augments additional liquid-to-substrate surface area, thereby increasing cooling capability, as well as an effective heat transfer coefficient. In spray cooling, surface dynamic wettability also affects drop impact dynamics and subsequent coolant evaporation on a hot surface. Herein, we introduced various nanotextured surfaces and affected dynamic wettability using the so-called thorny-devil nanofibers, nickel nanocones, Teflon and titania nanoparticles, and zinc nanowires. The effect of these different nanoscale architectures on drop impact phenomena and subsequent evaporative cooling was investigated. These nanotextured surfaces were fabricated using various deposition methods, including electrospinning, electroplating, supersonic spraying, aerosol deposition, and chemical bath deposition. We found that the surface with greater dynamic wettability related to the hydrodynamic focusing considerably improved the heat removal capability by furthering the Leidenfrost limit and facilitating drop spreading. In particular, the thorny-devil nanofiber surface yielded the highest heat flux at all ranges of the Reynolds and Weber numbers. Spray cooling on a model electronic kit also confirmed that the thorny-devil nanofibers were most effective in cooling the surface of the model kit during multiple cycles of water spraying.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Zhang, Junyan, Yunwei Mao, Dong Wang, Ju Li, and Yunzhi Wang. "Accelerating ferroic ageing dynamics upon cooling." NPG Asia Materials 8, no. 10 (October 2016): e319-e319. http://dx.doi.org/10.1038/am.2016.152.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Vega, Aurelio, Fernando V. Díez , and José M. . Alvarez. "Dynamics of a Batch Cooling Crystallizer." JOURNAL OF CHEMICAL ENGINEERING OF JAPAN 29, no. 5 (1996): 817–24. http://dx.doi.org/10.1252/jcej.29.817.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Hägele, D., R. Zimmermann, M. Oestreich, M. R. Hofmann, W. W. Rühle, B. K. Meyer, H. Amano, and I. Akasaki. "Cooling dynamics of excitons in GaN." Physical Review B 59, no. 12 (March 15, 1999): R7797—R7800. http://dx.doi.org/10.1103/physrevb.59.r7797.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Alouani Bibi, Fathallah, James Binney, Katherine Blundell, and Henrik Omma. "AGN effect on cooling flow dynamics." Astrophysics and Space Science 311, no. 1-3 (July 18, 2007): 317–21. http://dx.doi.org/10.1007/s10509-007-9542-4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Lee, S. Y., Y. Zhang, and K. Y. Ng. "Damping dynamics of optical stochastic cooling." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 532, no. 1-2 (October 2004): 340–44. http://dx.doi.org/10.1016/j.nima.2004.06.063.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Liu, T. X., W. G. Lynch, M. J. van Goethem, X. D. Liu, R. Shomin, W. P. Tan, M. B. Tsang, et al. "Cooling dynamics in multi-fragmentation processes." Europhysics Letters (EPL) 74, no. 5 (June 2006): 806–12. http://dx.doi.org/10.1209/epl/i2006-10040-x.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Cooling dynamics"

1

Ryjkov, Vladimir Leonidovich. "Laser cooling and sympathetic cooling in a linear quadrupole rf trap." Texas A&M University, 2003. http://hdl.handle.net/1969.1/1637.

Повний текст джерела
Анотація:
An investigation of the sympathetic cooling method for the studies of large ultra-cold molecular ions in a quadrupole ion trap has been conducted.Molecular dynamics simulations are performed to study the rf heating mechanisms in the ion trap. The dependence of rf heating rates on the ion temperature, trapping parameters, and the number of ions is obtained. New rf heating mechanism affecting ultra-cold ion clouds exposed to laser radiation is described.The saturation spectroscopy setup of the hyperfine spectra of the molecular iodine has been built to provide an accurate frequency reference for the laser wavelength. This reference is used to obtain the fluorescence lineshapes of the laser cooled Mg$^+$ ions under different trapping conditions.The ion temperatures are deduced from the measurements, and the influence of the rf heating rates on the fluorescence lineshapes is also discussed. Cooling of the heavy ($m=720$a.u.) fullerene ions to under 10K by the means of the sympathetic cooling by the Mg$^+$ ions($m=24$a.u.) is demonstrated. The single-photon imaging system has been developed and used to obtain the images of the Mg$^+$ ion crystal structures at mK temperatures.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Rogers, Chris. "Beam Dynamics in an Ionisation Cooling Channel." Thesis, Imperial College London, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.499277.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Sargison, Jane Elizabeth. "Development of a novel film cooling hole geometry." Thesis, University of Oxford, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.365427.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Dall'Olio, Giacomo. "CFD study of electric motor's cooling." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020.

Знайти повний текст джерела
Анотація:
Nowadays electrification is one of the leading fields of engineering as it is seen as one of the key factors that can reduce environmental impact of human activities by reducing theirs polluting emissions. Mobility is the sector in which electric driven systems are diffusing the most. The search for performance in one of its main component, the electric motor, is therefore of fundamental importance in terms of efficiency and reliability of every electric driven applications. The optimization of thermal aspects covers a primary role and highly affect power consumption and lifetime of components. With this intent the use of CFD, Computational Fluid Dynamics, allows to exploit most of heat transfer aspects which concurs on thermal behavior both for design phase and performance estimations. The work of this thesis investigates the cooling performances of the motor driving an electric vehicle made by Engines Engineering -EE- which is a company that projects motorbikes for thirds and is recently going to expand in the field of electric mobility. Beside the specific case studied, the methods can be extended to any component which require a thermal management as CFD tools are fundamental in a very wide spectrum of application in engineering.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Petters, Jonathan L. Clothiaux Eugene. "The impact of radiative heating and cooling on marine stratocumulus dynamics." [University Park, Pa.] : Pennsylvania State University, 2009. http://etda.libraries.psu.edu/theses/approved/WorldWideIndex/ETD-4602/index.html.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Gudmundsson, Yngvi. "Performance evaluation of wet-cooling tower fills with computational fluid dynamics." Thesis, Stellenbosch : Stellenbosch University, 2012. http://hdl.handle.net/10019.1/19908.

Повний текст джерела
Анотація:
Thesis (MScEng)--Stellenbosch University, 2012.
ENGLISH ABSTRACT: A wet-cooling tower fill performance evaluation model developed by Reuter is derived in Cartesian coordinates for a rectangular cooling tower and compared to cross- and counterflow Merkel, e-NTU and Poppe models. The models are compared by applying them to a range of experimental data measured in the cross- and counterflow wet-cooling tower test facility at Stellenbosch University. The Reuter model is found to effectively give the same results as the Poppe method for cross- and counterflow fill configuration as well as the Merkel and e-NTU method if the assumptions as made by Merkel are implemented. A second order upwind discretization method is applied to the Reuter model for increased accuracy and compared to solution methods generally used to solve cross- and counterflow Merkel and Poppe models. First order methods used to solve the Reuter model and crossflow Merkel and Poppe models are found to need cell sizes four times smaller than the second order method to obtain the same results. The Reuter model is successfully implemented in two- and three-dimensional ANSYS-Fluent® CFD models for under- and supersaturated air. Heat and mass transfer in the fill area is simulated with a user defined function that employs a second order upwind method. The two dimensional ANSYS-Fluent® model is verified by means of a programmed numerical model for crossflow, counterflow and cross-counterflow.
AFRIKAANSE OPSOMMING: ‘n Natkoeltoring model vir die evaluering van pakkings werkverrigting, wat deur Reuter ontwikkel is, word in Kartesiese koördinate afgelei vir ‘n reghoekige koeltoring en word vergelyk met kruis- en teenvloei Merkel, e-NTU en Poppe modelle. Die verskillende modelle word vergelyk deur hulle op ‘n reeks eksperimentele data toe te pas wat in die kruis- en teenvloei natkoeltoring toetsfasiliteit by die Universiteit van Stellenbosch gemeet is. Dit is bevind dat die Reuter model effektief dieselfde resultate gee as die Poppe model vir kruis- en teenvloei pakkingskonfigurasies sowel as die Merkel en e-NTU metode, indien dieselfde aannames wat deur Merkel gemaak is geїmplementeer word. ‘n Tweede orde “upwind” metode word op die Reuter model toegepas vir hoër akkuraatheid en word vergelyk met oplossingsmetodes wat gewoonlik gebruik word om kruis- en teenvloei Merkel en Poppe modelle op te los. Eerste orde metodes wat gebruik is om die Reuter model en kruisvloei Merkel en Poppe modelle op te los benodig rooster selle wat vier keer kleiner is as vir tweede orde metodes om dieselfde resultaat te verkry. Die Reuter model is suksesvol in twee- en driedimensionele ANSYS-Fluent® BVD (“CFD”) modelle geїmplementeer vir on- en oorversadigde lug. Warmte- en massaoordrag in die pakkingsgebied word gesimuleer mbv ‘n gebruiker gedefinieerde funksie (“user defined function”) wat van ‘n tweede orde numeriese metode gebruik maak. Die tweedimensionele ANSYS-Fluent® model word m.b.v. ‘n geprogrameerde numeriese model bevestig vir kruis-, teen- en kruis-teenvloei.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Khan, Jobaidur Rahman. "Fog Cooling, Wet Compression and Droplet Dynamics In Gas Turbine Compressors." ScholarWorks@UNO, 2009. http://scholarworks.uno.edu/td/908.

Повний текст джерела
Анотація:
During hot days, gas turbine power output deteriorates significantly. Among various means to augment gas turbine output, inlet air fog cooling is considered as the simplest and most costeffective method. During fog cooling, water is atomized to micro-scaled droplets and introduced into the inlet airflow. In addition to cooling the inlet air, overspray can further enhance output power by intercooling the compressor. However, there are concerns that the water droplets might damage the compressor blades and increased mass might cause potential compressor operation instability due to reduced safety margin. Furthermore, the two-phase flow thermodynamics during wet compression in a rotating system has not been fully established, so continued research and development in wet compression theory and prediction model are required. The objective of this research is to improve existing wet compression theory and associated models to accurately predict the compressor and the entire gas turbine system performance for the application of gas turbine inlet fog cooling. The following achievements have been accomplished: (a) At the system level, a global gas turbine inlet fog cooling theory and algorithm have been developed and a system performance code, FogGT, has been written according to the developed theory. (b) At the component level, a stage-stacking wet compression theory in the compressor has been developed with known airfoil configurations. (c) Both equilibrium and non-equilibrium water droplet thermal-fluid dynamic models have been developed including droplet drag forces, evaporation rate, breakup and coalescence. A liquid erosion model has also been developed and incorporated. (d) Model for using computational fluid dynamics (CFD) code has been developed to simulate multiphase wet compression in the rotating compressor stage. In addition, with the continued increase in volatility of natural gas prices as well as concerns regarding national energy security, this research has also investigated employing inlet fogging to gas turbine system fired with alternative fuels such as low calorific value synthetic gases. The key results include discovering that the saturated fogging can reduce compressor power consumption, but overspray, against conventional intuition, actually increases compressor power. Nevertheless, inlet fogging does increase overall net power output.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Dunn, Josh W. "Stochastic models of atom-photon dynamics with applications to cooling quantum gases." Connect to online resource, 2007. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3273696.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Lippmann, Jan Frederik [Verfasser]. "Laser Cooling of Semiconductors: Ultrafast Carrier and Lattice Dynamics / Jan Frederik Lippmann." München : Verlag Dr. Hut, 2018. http://d-nb.info/1172581983/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Johansson, Adam, and Jonas Gunnarsson. "Predicting Flow Dynamics of an Entire Engine Cooling System Using 3D CFD." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-62763.

Повний текст джерела
Анотація:
A combustion engine generates a lot of heat which need to be cooled to prevent damages to the engine and the surrounding parts. If the cooling system can not provide enough cooling to keep the engine in a well defined range of temperatures performance and durability will decrease and emissions increase. It is also important that the cooling system do not over-cool the engine, since this may result in rough running, increased engine friction and an overall negative performance. The aim of this thesis work is to create a complete 3D digital model of the cooling system for the first generation VED4 HP with CFD in STAR-CCM+. The simulated results are compared to available experimental data for validation. Today the entire system is being modeled with 1D CFD. One of the selected components in the cooling system being model in 3D at Volvo Cars is the water jacket. The 3D CFD model depends on the 1D CFD model for the boundary conditions which is an ineffective and time consuming process, sending data back and forth between the models when making changes. A 3D CFD model is not only more accurate than the 1D CFD model, since it capture the 3D flow phenomenas but it also allows parts or areas to be studied in detail. A study of four different turbulence models is conducted on the water jacket and on an arbitrary pipe in the cooling system. A mesh study is carried on the water jacket, the same arbitrary pipe and on the thermostat, both for the opened and closed thermostat. These studies are done with regard to pressure drop only. The study yields a low Reynolds model with the k-ε v2f turbulence model gave the best results. There is a discrepancy between the simulated results and the experiments. Main reasons to this may be the difference in the geometry used in this thesis for the digital model and the geometry used for the experiments together with the inaccuracies in the experimental data. The overall deviation is larger for a case with closed thermostat than for a case with an open thermostat. With the correct geometry and more accurate experimental data the simulations should be a close representation of reality.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Cooling dynamics"

1

McHugh, P. R. Natural circulation cooling in U.S. pressurized water reactors. Washington, DC: Division of Systems Research, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1992.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

NATO, Advanced Research Workshop on Cooling Flows in Clusters and Galaxies (1987 Cambridge England). Cooling flows in clusters and galaxies. Dordrecht: Kluwer Academic Publishers, 1988.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Ward, S. C. Validation of a CFD model for predicting film cooling performance. Washington, D. C: American Institute of Aeronautics and Astronautics, 1993.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Ganchev, B. G. Okhlazhdenie ėlementov i͡a︡dernykh reaktorov stekai͡u︡shchimi plenkami. Moskva: Ėnergoatomizdat, 1987.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

United States. National Aeronautics and Space Administration., ed. The mass and dynamics of cD clusters with cooling flows. [Washington, DC: National Aeronautics and Space Administration, 1994.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Wen-ping, Wang, and NASA Glenn Research Center, eds. Multiphysics simulation of active hypersonic lip cooling. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Sandīpa, Datta, and Ekkad Srinath 1958-, eds. Gas turbine heat transfer and cooling technology. 2nd ed. Boca Raton, FL: Taylor & Francis, 2012.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Fryer, C. P. The postirradiation examination of the DC melt dynamics experiments. Washington, DC: Division of Reactor Accident Analysis, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1988.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

A, Cavicchia M., Alfano R. R, and United States. National Aeronautics and Space Administration., eds. Hot carrier dynamics in the X valley in Si and Ge measured by pump-IR-probe absorption spectroscopy. [Washington, DC: National Aeronautics and Space Administration, 1996.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

A, Cavicchia M., Alfano R. R, and United States. National Aeronautics and Space Administration., eds. Hot carrier dynamics in the X valley in Si and Ge measured by pump-IR-probe absorption spectroscopy. [Washington, DC: National Aeronautics and Space Administration, 1996.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Cooling dynamics"

1

Goldhirsch, Isaac, S. Henri Noskowicz, and Oded Bar-Lev. "The Homogeneous Cooling State Revisited." In Granular Gas Dynamics, 37–63. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-540-39843-1_2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Innes, D. E. "Catastrophic Cooling Diagnostics." In Kinematics and Dynamics of Diffuse Astrophysical Media, 311–16. Dordrecht: Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-011-0926-0_50.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Baldassarri, Andrea, Umberto Marini Bettolo Marconi, and Andrea Puglisi. "Velocity Fluctuations in Cooling Granular Gases." In Granular Gas Dynamics, 95–117. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-540-39843-1_4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Reischl, Uwe, Kylie Pace, Conrad Colby, and Ravindra Goonitelleke. "Cooling Dynamics of Wet Clothing." In Advances in Intelligent Systems and Computing, 311–19. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-41694-6_32.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Hauptenbuchner, Barbara, and Milan David. "The possibility of dynamic diagnostics at high cooling towers." In Structural Dynamics, 363–67. London: Routledge, 2022. http://dx.doi.org/10.1201/9780203738085-52.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

O’Connell, R. W. "Star Formation in Cooling Flows." In Structure and Dynamics of Elliptical Galaxies, 167–78. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3971-4_14.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Böhringer, Hans, and Gregor E. Morfill. "Dynamics of Cosmic Rays in Cooling Flows." In Cooling Flows in Clusters and Galaxies, 87–91. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2953-1_9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Binney, James. "Dynamics of E Galaxies and Cluster Sources." In Cooling Flows in Clusters and Galaxies, 225–33. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2953-1_27.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Kolev, Nikolay Ivanov. "External Cooling of Reactor Vessels during Severe Accident." In Multiphase Flow Dynamics 5, 637–90. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-15156-4_16.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Kolev, Nikolay I. "External cooling of reactor vessels during severe accident." In Multiphase Flow Dynamics 4, 497–548. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-92918-5_16.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Cooling dynamics"

1

Dietrich, J. "Studies of Beam Dynamics in Cooler Rings." In BEAM COOLING AND RELATED TOPICS: International Workshop on Beam Cooling and Related Topics - COOL05. AIP, 2006. http://dx.doi.org/10.1063/1.2190104.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

RAGHUNATHAN, S., F. ZARIFI-RAD, and D. MABEY. "Effect of model cooling on periodic transonic flow." In 22nd Fluid Dynamics, Plasma Dynamics and Lasers Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1991. http://dx.doi.org/10.2514/6.1991-1714.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Parsa, Zohreh, and Pavel Zenkevich. "Kinetics of muon longitudinal cooling." In Beam stability and nonlinear dynamics. American Institute of Physics, 1997. http://dx.doi.org/10.1063/1.53499.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Shevy, Y. "Laser Cooling with Squeezed Light." In Nonlinear Dynamics in Optical Systems. Washington, D.C.: Optica Publishing Group, 1990. http://dx.doi.org/10.1364/nldos.1990.stsa581.

Повний текст джерела
Анотація:
The process of laser cooling in a quasi resonant standing laser wave is one of the principal technics of laser cooling of atoms. Recent advances in this field include breaking both the "Doppler and the recoil limits". On another front modification of the quantum statistical properties of the "vacuum" fluctuations by squeezing has been achieved in the laboratory. It is, therefore, interesting to find what is the nature of the modification of the laser cooling process when the atoms are also embedded in squeezed vacuum. Such a state can be produced in principle by a degenerate parametric amplifier whose input are vacuum fluctuations. It is shown that due to the modified decay rates of an atom which is embedded in such a state, profound modification of the cooling processes in a standing wave is achieved . Among the important results obtained is the change of sign of the stimulated force from a heating force in normal vacuum to a cooling force in squeezed vacuum. This phenomenon can result in cooling forces more than two orders of magnitude larger than the maximum force in normal vacuum. In this talk the method for calculating the force in squeezed vacuum will be given. The modified force will be compared to the force in normal vacuum and finally the practical implications of these results for laser cooling will be discussed.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Fedotov, A. V. "Electron Cooling Dynamics for RHIC." In HIGH INTENSITY AND HIGH BRIGHTNESS HADRON BEAMS: 33rd ICFA Advanced Beam Dynamics Workshop on High Intensity and High Brightness Hadron Beams. AIP, 2005. http://dx.doi.org/10.1063/1.1949575.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Parsa, Zohreh. "Ionization cooling and muon dynamics." In Physics potential and development of μ. AIP, 1998. http://dx.doi.org/10.1063/1.56432.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Skrinsky, A. N. "Ionization cooling and muon collider." In The 9th advanced ICFA beam dynamics workshop: Beam dynamics and technology issues for μ+μ− colliders. American Institute of Physics, 1996. http://dx.doi.org/10.1063/1.50897.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Melis, Matthew, and Wen-Ping Wang. "Multiphysics simulation of active hypersonic cowl lip cooling." In 30th Fluid Dynamics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1999. http://dx.doi.org/10.2514/6.1999-3510.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Reijasse, Philippe, and Luca Boccaletto. "Nozzle Flow Separation with Film Cooling." In 38th Fluid Dynamics Conference and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2008. http://dx.doi.org/10.2514/6.2008-4150.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

WANG, JONG. "Prediction of turbulent mixing and film-cooling effectiveness for hypersonic flows." In 20th Fluid Dynamics, Plasma Dynamics and Lasers Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1989. http://dx.doi.org/10.2514/6.1989-1867.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Cooling dynamics"

1

Rogers, Chris. Beam Dynamics in a Muon Ionisation Cooling Channel. Office of Scientific and Technical Information (OSTI), September 2008. http://dx.doi.org/10.2172/983633.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Yang, Jiann C. On the cooling of a 360� video camera to observe fire dynamics in situ. Gaithersburg, MD: National Institute of Standards and Technology, December 2019. http://dx.doi.org/10.6028/nist.tn.2080.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Owen, Justin. Simulation of Electron Beam Dynamics in the 22 MeV Accelerator for a Coherent Electron Cooling Proof of Principle Experiment. Office of Scientific and Technical Information (OSTI), December 2013. http://dx.doi.org/10.2172/1341607.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Aho, J. M., C. S. Anderson, K. B. Floyd, M. T. Negus, and M. R. Meador. Patterns of fish assemblage structure and dynamics in waters of the Savannah River Plant. Comprehensive Cooling Water Study final report. Office of Scientific and Technical Information (OSTI), June 1986. http://dx.doi.org/10.2172/10118268.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

O'Brien, Russ. Absorber Cooling Circuits Dynamic Pressure Study. Office of Scientific and Technical Information (OSTI), July 2018. http://dx.doi.org/10.2172/1480942.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Witzig, Andreas, Camilo Tello, Franziska Schranz, Johannes Bruderer, and Matthias Haase. Quantifying energy-saving measures in office buildings by simulation in 2D cross sections. Department of the Built Environment, 2023. http://dx.doi.org/10.54337/aau541623658.

Повний текст джерела
Анотація:
A methodology is presented to analyse the thermal behaviour of buildings with the goal to quantify energy saving measures. The solid structure of the building is modelled with finite elements to fully account for its ability to store energy and to accurately predict heat loss through thermal bridges. Air flow in the rooms is approximated by a lumped element model with three dynamical nodes per room. The dynamic model also contains the control algorithm for the HVAC system and predicts the net primary energy consumption for heating and cooling of the building for any time period. The new simulation scheme has the advantage to avoid U-values and thermal bridge coefficients and instead use well-known physical material parameters. It has the potential to use 2D and 3D geometries with appropriate automatic processing from BIM models. Simulations are validated by comparison to IDA ICE and temperature measurement. This work aims to discuss novel approaches to disseminating building simulation more widely.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Abboud, Alexander, Jacob Lehmer, Brandon Starks, Tyler Phillips, and Jake Gentle. Dynamic Line Rating Study of Concurrent Cooling for a Proposed Wind Farm. Office of Scientific and Technical Information (OSTI), March 2021. http://dx.doi.org/10.2172/1924425.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Olivieri, David Nicholas. A Dynamic Momentum Compaction Factor Lattice for Improvements to Stochastic Cooling in Storage Rings. Office of Scientific and Technical Information (OSTI), January 1996. http://dx.doi.org/10.2172/1422805.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Vijaya Kumar, Thea, Ram Srinivasan, and J. DeRienzis. Fluid dynamic simulation and analysis of water-cooling systems for the Electron-Ion Collider. Office of Scientific and Technical Information (OSTI), August 2021. http://dx.doi.org/10.2172/1964078.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Sakagawa, Keiji, Hideto Yoshitake, and Eiji Ihara. Computational Fluid Dynamics for Design of Motorcycles (Numerical Analysis of Coolant Flow and Aerodynamics). Warrendale, PA: SAE International, October 2005. http://dx.doi.org/10.4271/2005-32-0033.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Cooling dynamics" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії