Добірка наукової літератури з теми "Compositie materials"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Compositie materials".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Compositie materials"
van der Vlugt, Marloeke. "Tactiele compositie." FORUM+ 27, no. 2 (June 1, 2020): 33–42. http://dx.doi.org/10.5117/forum2020.2.005.vlug.
Повний текст джерелаKhomenko, E. V., N. I. Grechanyuk, and V. Z. Zatovsky. "Modern composite materials for switching and welding equipment. information 1. powdered composite materials." Paton Welding Journal 2015, no. 10 (October 28, 2015): 36–42. http://dx.doi.org/10.15407/tpwj2015.10.06.
Повний текст джерелаJiménez-Morales, A., E. M. Ruiz-Navas, J. B. Fogagnolo, and J. M. Torralba. "Influencia de la composición y las condiciones de procesado en la resistencia a la corrosión de materiales compuestos base aluminio." Boletín de la Sociedad Española de Cerámica y Vidrio 43, no. 2 (April 30, 2004): 196–99. http://dx.doi.org/10.3989/cyv.2004.v43.i2.500.
Повний текст джерелаMiravete, A. "Materiales compuestos en la construcción: Introducción." Materiales de Construcción 47, no. 247-248 (December 30, 1997): 5–9. http://dx.doi.org/10.3989/mc.1997.v47.i247-248.491.
Повний текст джерелаJiménez, M. A., L. Castejón, and A. Miravete. "Materiales compuestos realizados a partir de nuevas tecnologías textiles." Materiales de Construcción 47, no. 247-248 (December 30, 1997): 83–91. http://dx.doi.org/10.3989/mc.1997.v47.i247-248.497.
Повний текст джерелаPaknahad, Elham, and Andrew P. Grosvenor. "Investigation of CeTi2O6- and CaZrTi2O7-containing glass–ceramic composite materials." Canadian Journal of Chemistry 95, no. 11 (November 2017): 1110–21. http://dx.doi.org/10.1139/cjc-2016-0633.
Повний текст джерелаPlatnieks, Oskars, Sergejs Gaidukovs, Anda Barkane, Gerda Gaidukova, Liga Grase, Vijay Kumar Thakur, Inese Filipova, Velta Fridrihsone, Marite Skute, and Marianna Laka. "Highly Loaded Cellulose/Poly (butylene succinate) Sustainable Composites for Woody-Like Advanced Materials Application." Molecules 25, no. 1 (December 28, 2019): 121. http://dx.doi.org/10.3390/molecules25010121.
Повний текст джерелаMELNYK, Liubov, Valentyn SVIDERSKYI, and Lev CHERNYAK. "FEATURES OF VOLCANIC ROCKS AS MATERIALS FOR POLYMERIC COPOSITES." Herald of Khmelnytskyi National University 305, no. 1 (February 23, 2022): 14–19. http://dx.doi.org/10.31891/2307-5732-2022-305-1-14-19.
Повний текст джерелаFakhrudi, Yoga Ahdiat, Kholis Nur Faidzin, and Rahayu Mekar Bisono. "Effect of Composite Composition on Mechanical Properties of Banana Fiber Composites with Epoxy Matrix for Functional Materials." International Journal of Science, Engineering and Information Technology 6, no. 2 (July 31, 2022): 303–6. http://dx.doi.org/10.21107/ijseit.v6i2.15804.
Повний текст джерелаShishelova, Tamara I., Vadim V. Fedchishin, and Mikhail A. Khramovskih. "Study of Whiskers to be Used in Composite Materials." Solid State Phenomena 316 (April 2021): 51–55. http://dx.doi.org/10.4028/www.scientific.net/ssp.316.51.
Повний текст джерелаДисертації з теми "Compositie materials"
Kugler, Danielle. "Experimental investigation of the effect of changes in processing history on compositie laminates and cylinders /." Digital version accessible at:, 1998. http://wwwlib.umi.com/cr/utexas/main.
Повний текст джерелаFreitas, Ricardo Luiz Barros de [UNESP]. "Fabricação, caracterização e aplicações do compósito PZT/PVDF." Universidade Estadual Paulista (UNESP), 2012. http://hdl.handle.net/11449/100281.
Повний текст джерелаConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Um material compósito é constituído pela combinação de dois ou mais materiais, onde se procura sintetizar um novo material multifásico, e que abrigue as melhores características individuais de cada um de seus constituintes. Compósitos de polímeros (matriz) e ferroelétricos (inclusões) podem manifestar piezoeletricidade, ou seja, a produção de uma resposta elétrica devido a uma excitação mecânica, e vice-versa. Nesta tese o material polimérico usado para preparar os filmes ou lâminas de nanocompósitos é o PVDF, e, o material cerâmico é formado por nanopartículas de PZT. Ambos os materiais são dielétricos, porém, com características muito distintas (por exemplo, o PVDF tem aproximadamente 1/4 da densidade e 1/250 da constante dielétrica do PZT). O PZT é muito utilizado em transdutores, principalmente devido aos seus elevados coeficientes piezoelétricos, contudo, é quebradiço e sofre desgaste quando empregado na forma de filmes ou lâminas. Por outro lado, o PVDF é um polímero piezoelétrico que apresenta grande flexibilidade e excelentes resistências mecânica e química, porém, seus coeficientes piezoelétricos são apenas moderados. A fim de se aumentar a flexibilidade do PZT, mistura-se o pó cerâmico, na forma de nanopartículas, com o PVDF, também pulverizado. Na tese, evidencia-se que o compósito constituído por esta combinação cerâmica-polímero proporciona uma nova classe de materiais funcionais com grande potencial de aplicação, por terem combinadas a resistência e rigidez das cerâmicas, e, a elasticidade, flexibilidade, baixa densidade e elevada resistência a ruptura mecânica dos polímeros. O novo material tem grande resistência a choques mecânicos, flexibilidade, maleabilidade, e, principalmente, coeficientes piezoelétricos relativamente elevados. Amostras do compósito...
A composite material is constituted by the combination of two or more materials, which synthesizes a new multiphase material, and has the best individual characteristics of each of its constituents. Polymer composites (matrix) and ferroelectric (inclusions) can express piezoelectricity, i.e. the production of an electrical response due to a mechanical excitation, and vice versa. In this thesis the polymeric material used to prepare the films or slides of nanocomposites is the PVDF, and, ceramic material is formed by PZT nanoparticles. Both materials are dielectrics, however, with very different characteristics (for example, the PVDF is approximately 1/4 density and 1/250 relative permittivity from PZT). The PZT is widely used in transducers, mainly due to their high piezoelectric coefficients, however, is brittle and suffers wear and tear when employed in the form of films or slides. On the other hand, the PVDF is a piezoelectric polymer that offers great flexibility and excellent mechanical and chemical resistances, however, its piezoelectric coefficients are only moderate. In order to increase the flexibility of PZT, ceramic powder is mix, in the form of nanoparticles, with PVDF, also sprayed. In theory, it becomes evident that composite consisting of this ceramic- polymer combination delivers a new class of functional materials with great potential for application, because they combine the strength and rigidity of ceramics, and elasticity, flexibility, low density and high resistance to mechanical disruption of polymers. The new material has great resistance to mechanical shock, flexibility, suppleness, and, primarily, relatively high piezoelectric coefficients. PZT/PVDF composite samples were fabricated and characterized aiming to applications such as: piezoelectric actuators, acoustic emission detectors, and energy... (Complete abstract click electronic access below)
Lorandi, Natália Pagnoncelli. "Estudo das propriedades dinâmico-mecânicas e fluência de compósitos epóxi/tecido não-dobrável de carbono produzidos por VARTM e RFI." reponame:Repositório Institucional da UCS, 2016. https://repositorio.ucs.br/handle/11338/1844.
Повний текст джерелаSubmitted by Ana Guimarães Pereira (agpereir@ucs.br) on 2017-03-16T17:48:39Z No. of bitstreams: 1 Dissertacao Natalia Pagnoncelli Lorandi.pdf: 2042542 bytes, checksum: a231d9dd1acdbee5c47b2794a5af07be (MD5)
Made available in DSpace on 2017-03-16T17:48:39Z (GMT). No. of bitstreams: 1 Dissertacao Natalia Pagnoncelli Lorandi.pdf: 2042542 bytes, checksum: a231d9dd1acdbee5c47b2794a5af07be (MD5) Previous issue date: 2017-03-16
The excellent cost-weigh-performance relationship of polymeric composites compared to traditional materials became a reason to development of advanced materials for structural application such as carbon/epoxy composites, and with that, new processing methods, different resins (matrix) and fabrics (reinforcement) producing. Polymers and their composites present viscoelastic behavior, and so issues such as dimensional stability and long-term resistance must be taken into account when used by aeronautic industry. Dynamic-mechanical analysis (DMA) allows the evaluation of viscoelastic properties, and with creep tests, it is possible to study materials strain as function of time, under constant stress and temperature. In this study, epoxy/carbon NCF composites were manufactured by two techniques: vacuum assisted resin transfer molding (VARTM) and resin film infusion (RFI), and a comparative analysis between both composites was made. Storage modulus, E’, for RFI composite was approximately 10 GPa higher along the glassy region and Tonset approximately 60°C higher than VARTM composite. RFI composite also presented a wider glass transition region (form tan δ curve). These results were associated to the molecular relaxation and higher chain cooperative motion, and to the higher stiffness of RFI composite. Creep strain tests were performed in three different stress levels and temperatures, and VARTM composite presented larger creep strain with time, indicating a weaker interface fiber/matrix and a lower stiffness composite, and corroborating with short-beam shear resistance. Findley and Burger’s model were applied and both agreed well with experimental creep curves. Parameters of each model were associated to composites viscoelastic behavior and they were related to the other results.
Karlsson, Johan. "Composite material in car hood : Investigation of possible sandwich materials." Thesis, Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-45633.
Повний текст джерелаPalmer, Nathan Reed. "Smart Composites evaluation of embedded sensors in composite materials /." Thesis, Montana State University, 2009. http://etd.lib.montana.edu/etd/2009/palmer/PalmerN0809.pdf.
Повний текст джерелаBovicelli, Federico. "On the influence of polymeric nanofibers in laminated composite materials. Studio dell'influenza di nanofibre polimeriche in materiali compositi laminati." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2014. http://amslaurea.unibo.it/6784/.
Повний текст джерелаFreitas, Ricardo Luiz Barros de. "Fabricação, caracterização e aplicações do compósito PZT/PVDF /." Ilha Solteira, [s.n.], 2012. http://hdl.handle.net/11449/100281.
Повний текст джерелаCoorientador: Antônio de Pádua Lima Filho
Banca: Cláudio Kitano
Banca: João Antonio Pereira
Banca: Adriano Rogério Bruno Tech
Resumo: Um material compósito é constituído pela combinação de dois ou mais materiais, onde se procura sintetizar um novo material multifásico, e que abrigue as melhores características individuais de cada um de seus constituintes. Compósitos de polímeros (matriz) e ferroelétricos (inclusões) podem manifestar piezoeletricidade, ou seja, a produção de uma resposta elétrica devido a uma excitação mecânica, e vice-versa. Nesta tese o material polimérico usado para preparar os filmes ou lâminas de nanocompósitos é o PVDF, e, o material cerâmico é formado por nanopartículas de PZT. Ambos os materiais são dielétricos, porém, com características muito distintas (por exemplo, o PVDF tem aproximadamente 1/4 da densidade e 1/250 da constante dielétrica do PZT). O PZT é muito utilizado em transdutores, principalmente devido aos seus elevados coeficientes piezoelétricos, contudo, é quebradiço e sofre desgaste quando empregado na forma de filmes ou lâminas. Por outro lado, o PVDF é um polímero piezoelétrico que apresenta grande flexibilidade e excelentes resistências mecânica e química, porém, seus coeficientes piezoelétricos são apenas moderados. A fim de se aumentar a flexibilidade do PZT, mistura-se o pó cerâmico, na forma de nanopartículas, com o PVDF, também pulverizado. Na tese, evidencia-se que o compósito constituído por esta combinação cerâmica-polímero proporciona uma nova classe de materiais funcionais com grande potencial de aplicação, por terem combinadas a resistência e rigidez das cerâmicas, e, a elasticidade, flexibilidade, baixa densidade e elevada resistência a ruptura mecânica dos polímeros. O novo material tem grande resistência a choques mecânicos, flexibilidade, maleabilidade, e, principalmente, coeficientes piezoelétricos relativamente elevados. Amostras do compósito... (Resumo completo, clicar acesso eletrônico abaixo)
Abstract: A composite material is constituted by the combination of two or more materials, which synthesizes a new multiphase material, and has the best individual characteristics of each of its constituents. Polymer composites (matrix) and ferroelectric (inclusions) can express piezoelectricity, i.e. the production of an electrical response due to a mechanical excitation, and vice versa. In this thesis the polymeric material used to prepare the films or slides of nanocomposites is the PVDF, and, ceramic material is formed by PZT nanoparticles. Both materials are dielectrics, however, with very different characteristics (for example, the PVDF is approximately 1/4 density and 1/250 relative permittivity from PZT). The PZT is widely used in transducers, mainly due to their high piezoelectric coefficients, however, is brittle and suffers wear and tear when employed in the form of films or slides. On the other hand, the PVDF is a piezoelectric polymer that offers great flexibility and excellent mechanical and chemical resistances, however, its piezoelectric coefficients are only moderate. In order to increase the flexibility of PZT, ceramic powder is mix, in the form of nanoparticles, with PVDF, also sprayed. In theory, it becomes evident that composite consisting of this ceramic- polymer combination delivers a new class of functional materials with great potential for application, because they combine the strength and rigidity of ceramics, and elasticity, flexibility, low density and high resistance to mechanical disruption of polymers. The new material has great resistance to mechanical shock, flexibility, suppleness, and, primarily, relatively high piezoelectric coefficients. PZT/PVDF composite samples were fabricated and characterized aiming to applications such as: piezoelectric actuators, acoustic emission detectors, and energy... (Complete abstract click electronic access below)
Doutor
Podnos, Eugene Grigorievich. "Application of fictitious domain method to analysis of composite materials /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.
Повний текст джерелаYang, Heechun. "Modeling the processing science of thermoplastic composite tow prepreg materials." Diss., Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/17217.
Повний текст джерелаConejo, Luíza dos Santos [UNESP]. "Obtenção e caracterização térmica de compósitos nanoestruturados de resina fenol-furfurílica/CNT." Universidade Estadual Paulista (UNESP), 2015. http://hdl.handle.net/11449/123107.
Повний текст джерелаAs resinas fenólica e furfurílica possuem elevada densidade de ligações cruzadas e alto teor de carbono fixo, sendo, portanto, amplamente aplicadas na área aeroespacial, principalmente na obtenção de carbono vítreo. Apesar do domínio da produção de resinas fenol-furfurílica (FF) já se encontrar disponível em literatura, poucos dados a respeito de suas propriedades são publicados. Além disso, quase nenhuma informação pode ser encontrada a respeito da produção de compósitos nanoestruturados de resina fenol-furfurílica reforçada com nanotubos de carbono. Desta forma, o objetivo do presente trabalho é a obtenção de resina fenol-furfurílica e seus compósitos nanoestruturados com diferentes concentrações de nanotubos de carbono (0,1; 0,5 e 1,0 % m/m) e a caracterização térmica dos mesmos. Durante o desenvolvimento deste trabalho, as amostras foram avaliadas via calorimetria exploratória diferencial (DSC), visando obter informações a respeito do seu calor específico (cp); análise termomecânica (TMA) para obtenção do coeficiente de expansão térmica linear (α) e termogravimetria (TGA) para o conhecimento da temperatura de degradação térmica, tanto via análises reais como simuladas por software, conhecido como Highway Simulation. As análises de DSC mostram que os valores de cp tendem a aumentar com a temperatura até aproximadamente 150°C, a partir da qual tendem a decrescer. Além disso, a introdução dos CNT na resina FF aumenta o valor de cp até a concentração de 0,5%. O coeficiente de expansão térmica linear obtido pela técnica de TMA para a amostra de FF foi 33.10-6 °C-1. A introdução de CNT nas amostras de FF não afeta significativamente sua estabilidade térmica. Os valores encontrados de cp, α e temperatura inicial de degradação térmica para a resina FF são próximos aos valores da resina fenólica encontrados na literatura
Phenolic and furfuryl alcohol resins have a high density of cross-links and high carbon yield, and thus widely applied in the aerospace area, mainly in the vitreous carbon processing. The production of phenol-furfuryl alcohol resin (FF) is already available in the literature, however, few works report its properties. Furthermore, almost no information can be found regarding the production of nanostructured composites of FF/carbon nanotubes (CNT). In this way, the aim of this work is to obtain nanostructured composites of FF/CNT with different concentrations of carbon nanotubes (0.1, 0.5 and 1.0% w/w) and thermal characterization. The specimens were evaluated by differential scanning calorimetry (DSC), in order to obtain information regarding your specific heat (cp); thermo-mechanical analysis (TMA) for obtaining the linear thermal expansion coefficient (α) and thermogravimetry (TGA) to knowledge of the temperature of thermal degradation, either by actual analyses as simulated by software known as Highway Simulation. The DSC analysis shows that the samples studied show that cp values tend to increase with the increase of temperature up to 150°C. Furthermore, the introduction of the CNT in FF resin increases the value of cp up to a concentration of 0.5%. The coefficient of linear thermal expansion obtained by the TMA technique for sample FF was 33.10-6 °C-1. The introduction of the CNT samples FF does not affect its thermal stability. The values found in the analyses are close to the values of the phenolic resin in the literature
Книги з теми "Compositie materials"
Koohgilani, Mehran. Advanced composite materials: Composite material's history. Poole: Bournemouth University, 2001.
Знайти повний текст джерелаSundarkrishnaa, K. L. Friction Material Composites: Materials Perspective. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012.
Знайти повний текст джерелаTalreja, Ramesh. Fatigue of composite materials. Lyngby, Denmark: Technical University of Denmark, 1985.
Знайти повний текст джерелаTalreja, R. Fatigue of composite materials. Lancaster: Technomic Publishing, 1987.
Знайти повний текст джерела(Firm), Knovel, ed. Composite materials handbook: Metal matrix composites. [Washington, D.C.?]: U.S. Department of Defense, 2002.
Знайти повний текст джерела1944-, Michno Michael J., ed. Advanced composite materials. Berlin: New York, 1994.
Знайти повний текст джерелаMechanics of composite materials. 2nd ed. Philadelphia, PA: Taylor & Francis, 1999.
Знайти повний текст джерелаBackman, B. F. (Bjorn F.). and ScienceDirect (Online service), eds. Composite structures: Safety management. 2nd ed. Oxford, UK: Elsevier, 2008.
Знайти повний текст джерелаFatigue of composite materials. Lancaster: Technomic Pub. Co., 1987.
Знайти повний текст джерелаCarbon-based solids and materials. London: ISTE, 2010.
Знайти повний текст джерелаЧастини книг з теми "Compositie materials"
Ambrosio, L., G. Carotenuto, and L. Nicolais. "Composite materials." In Handbook of Biomaterial Properties, 214–69. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5801-9_18.
Повний текст джерелаAskeland, Donald R. "Composite Materials." In The Science and Engineering of Materials, 170–83. Boston, MA: Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-0443-2_16.
Повний текст джерелаGatewood, B. E. "Composite materials." In Virtual Principles in Aircraft Structures, 582–610. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1165-9_16.
Повний текст джерелаJohn, Vernon. "Composite Materials." In Introduction to Engineering Materials, 295–302. London: Palgrave Macmillan UK, 1992. http://dx.doi.org/10.1007/978-1-349-21976-6_21.
Повний текст джерелаRamírez, Alejandro Manzano, and Enrique V. Barrera. "Composite Materials." In Synthesis and Properties of Advanced Materials, 149–94. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6339-6_6.
Повний текст джерелаAskeland, Donald R. "Composite Materials." In The Science and Engineering of Materials, 549–94. Boston, MA: Springer US, 1996. http://dx.doi.org/10.1007/978-1-4899-2895-5_16.
Повний текст джерелаBiermann, Dirk. "Composite Materials." In CIRP Encyclopedia of Production Engineering, 1–5. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-642-35950-7_6396-4.
Повний текст джерелаJones, F. R. "Composite materials." In Chemistry and Technology of Epoxy Resins, 256–302. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-2932-9_8.
Повний текст джерелаBiermann, Dirk. "Composite Materials." In CIRP Encyclopedia of Production Engineering, 311–15. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-53120-4_6396.
Повний текст джерелаGdoutos, Emmanuel E. "Composite Materials." In Fracture Mechanics, 333–52. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-35098-7_11.
Повний текст джерелаТези доповідей конференцій з теми "Compositie materials"
Allen, Emily A., Lee D. Taylor, and John P. Swensen. "Smart Material Composites for Discrete Stiffness Materials." In ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/smasis2018-8203.
Повний текст джерелаAbdel Hamid, Dalia, Amal Esawi, Inas Sami, and Randa Elsalawy. "Characterization of Nano- and Micro-Filled Resin Composites Used as Dental Restorative Materials." In ASME 2008 2nd Multifunctional Nanocomposites and Nanomaterials International Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/mn2008-47053.
Повний текст джерелаPAYNE, NICHOLAS, and KISHORE POCHIRAJU. "A Methodology for Characterization of Material Constants for Strain-locking Materials." In American Society for Composites 2017. Lancaster, PA: DEStech Publications, Inc., 2017. http://dx.doi.org/10.12783/asc2017/15383.
Повний текст джерелаNELSON, JARED W., RONALD B. BUCINELL, and DANIEL WALCZYK. "Bio-Industrial Materials Institute: Characterization of Natural Fiber Material Property Variability." In American Society for Composites 2019. Lancaster, PA: DEStech Publications, Inc., 2019. http://dx.doi.org/10.12783/asc34/31325.
Повний текст джерелаNakai-Chapman, J., Y. H. Park, and J. Sakai. "Progressive Fatigue Life Prediction of Composite Materials Based on Residual Material Property Degradation Model." In ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/pvp2020-21595.
Повний текст джерелаRasdorf, William J., and Lisa K. Spainhour. "Developing and Implementing a Conceptual Composite Materials Design Database." In ASME 1993 International Computers in Engineering Conference and Exposition. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/edm1993-0109.
Повний текст джерелаReifsnider, Ken, and S. W. Case. "Life Prediction Based on Material State Changes in Ceramic Matrix Composite Materials." In ASME Turbo Expo 2007: Power for Land, Sea, and Air. ASMEDC, 2007. http://dx.doi.org/10.1115/gt2007-28167.
Повний текст джерелаKosaraju, Satyanarayana, Venu Gopal Anne, and Swapnil Gosavi. "Development of Hybrid Composites (Al-SiC-C) Through Stir Casting: Machinability Studies." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2659.
Повний текст джерелаAlhummidy G. Almotery, Khaled, Waleed Saeed M. Alsaiari, Yazeed Abdulrahman Y. Alyoussef, Mohammad Farraj M. Alsahli, Meshal Mohammed O. Alharbi, Tarek M. A. A. El-Bagory, and Ibrahim M. Alarifi. "Fabrication and Characterization of the Recycling of Composite Palm Materials, Shell, Leaves and Branches in Saudi Arabia." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10308.
Повний текст джерелаRazavi Setvati, Mahdi, Zahiraniza Mustaffa, Nasir Shafiq, and Zubair Imam Syed. "A Review on Composite Materials for Offshore Structures." In ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/omae2014-23542.
Повний текст джерелаЗвіти організацій з теми "Compositie materials"
McCullough, Roy L., and Diane S. Kukich. Composites 2000: An International Symposium on Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, June 2000. http://dx.doi.org/10.21236/ada384778.
Повний текст джерелаBarnes, Eftihia, Jennifer Jefcoat, Erik Alberts, Hannah Peel, L. Mimum, J, Buchanan, Xin Guan, et al. Synthesis and characterization of biological nanomaterial/poly(vinylidene fluoride) composites. Engineer Research and Development Center (U.S.), September 2021. http://dx.doi.org/10.21079/11681/42132.
Повний текст джерелаThornell, Travis, Charles Weiss, Sarah Williams, Jennifer Jefcoat, Zackery McClelland, Todd Rushing, and Robert Moser. Magnetorheological composite materials (MRCMs) for instant and adaptable structural control. Engineer Research and Development Center (U.S.), November 2020. http://dx.doi.org/10.21079/11681/38721.
Повний текст джерелаLee, Max. Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, September 1996. http://dx.doi.org/10.21236/ada316048.
Повний текст джерелаMandell, J. F., and D. D. Samborsky. DOE/MSU composite material fatigue database: Test methods, materials, and analysis. Office of Scientific and Technical Information (OSTI), December 1997. http://dx.doi.org/10.2172/578635.
Повний текст джерелаKennedy, Alan, Mark Ballentine, Andrew McQueen, Christopher Griggs, Arit Das, and Michael Bortner. Environmental applications of 3D printing polymer composites for dredging operations. Engineer Research and Development Center (U.S.), January 2021. http://dx.doi.org/10.21079/11681/39341.
Повний текст джерелаWadley, H. N. G., J. A. Simmons, R. B. Clough, F. Biancaniello, E. Drescher-Krasicka, M. Rosen, T. Hsieh, and K. Hirschman. Composite materials interface characterization. Gaithersburg, MD: National Bureau of Standards, 1988. http://dx.doi.org/10.6028/nbs.ir.87-3630.
Повний текст джерелаSpangler, Lee. Composite Materials for Optical Limiting. Fort Belvoir, VA: Defense Technical Information Center, April 2001. http://dx.doi.org/10.21236/ada396124.
Повний текст джерелаMagness, F. H. Joining of polymer composite materials. Office of Scientific and Technical Information (OSTI), November 1990. http://dx.doi.org/10.2172/6334940.
Повний текст джерелаAnderson, D. P., and B. P. Rice. Intrinsically Survivable Structural Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, April 2000. http://dx.doi.org/10.21236/ada387309.
Повний текст джерела