Добірка наукової літератури з теми "CHP model"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "CHP model".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "CHP model"
Wong-Kcomt, Jorge B. "The CHP Space: A Basic Model." Distributed Generation & Alternative Energy Journal 27, no. 3 (June 2012): 72–80. http://dx.doi.org/10.1080/21563306.2012.10531124.
Повний текст джерелаWong-Kcomt, Jorge B. "The CHP Space: A Basic Model." Distributed Generation & Alternative Energy Journal 27, no. 4 (September 2012): 74–78. http://dx.doi.org/10.1080/21563306.2012.10554223.
Повний текст джерелаMansour, Ahmed, Sherif Rashad, Kuniyasu Niizuma, Miki Fujimura, and Teiji Tominaga. "A novel model of cerebral hyperperfusion with blood-brain barrier breakdown, white matter injury, and cognitive dysfunction." Journal of Neurosurgery 133, no. 5 (November 2020): 1460–72. http://dx.doi.org/10.3171/2019.7.jns19212.
Повний текст джерелаŚladewski, Łukasz, Rafał Wereszczyński, Jerzy Majchrzak, Krzysztof Możejko, Wojciech Bujalski, Konrad Świrski, and Maks Sędzielski. "Close loop optimisation of large CHP based on approximation model." E3S Web of Conferences 137 (2019): 01051. http://dx.doi.org/10.1051/e3sconf/201913701051.
Повний текст джерелаOwaku, Takashi, Hiromi Yamamoto, and Atsushi Akisawa. "Optimal SOFC-CHP Installation Planning and Operation Model Considering Geographic Characteristics of Energy Supply Infrastructure." Energies 16, no. 5 (February 25, 2023): 2236. http://dx.doi.org/10.3390/en16052236.
Повний текст джерелаHughes, R. A., B. Ramsay, and C. Rossini. "A Knowledge-Based Decision Support System for Combined Heat and Power Investment Appraisal and Plant Selection." Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 210, no. 1 (February 1996): 15–24. http://dx.doi.org/10.1243/pime_proc_1996_210_004_02.
Повний текст джерелаŞah, Sezgin, and M. Handan Çubuk. "CHP Microturbine Configuration Model and Economic Analysis." Cogeneration & Distributed Generation Journal 24, no. 2 (April 2009): 51–61. http://dx.doi.org/10.1080/15453660909509008.
Повний текст джерелаJin, Xiao Long, Hai Feng Li, Tao Jin, Xian Dong Xu, Ming Shen Wang, and Jian Meng. "Economical and Coordinated Dispatch of CHP Based Microgrid with Renewable Energy Resources." Advanced Materials Research 960-961 (June 2014): 1022–28. http://dx.doi.org/10.4028/www.scientific.net/amr.960-961.1022.
Повний текст джерелаRazak, Amir A. "Library Structure of Dynamic Simulation for Combined Heat and Power Plant in Modelica Language." Applied Mechanics and Materials 110-116 (October 2011): 4925–31. http://dx.doi.org/10.4028/www.scientific.net/amm.110-116.4925.
Повний текст джерелаDe Souza, Ronelly, Melchiorre Casisi, Diego Micheli, and Mauro Reini. "A Review of Small–Medium Combined Heat and Power (CHP) Technologies and Their Role within the 100% Renewable Energy Systems Scenario." Energies 14, no. 17 (August 27, 2021): 5338. http://dx.doi.org/10.3390/en14175338.
Повний текст джерелаДисертації з теми "CHP model"
Brofman, Eduardo Gus. "Estudo de cogeração em hotéis." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2014. http://hdl.handle.net/10183/108526.
Повний текст джерелаThis work is a study of the application of a CHP (Combined Heat and Power) system in hotels built in the city of Porto Alegre, RS, Brazil. This system was analyzed from an economic and energetic point of view. The economic matter on its viability perspective was determined through quantitative methods, in this case, with the focus on the time frame for the investment's return. For the energetic analysis, a annual energy consumption and demand study was performed utilizing a whole-building energy model with computer simulation. The chosen software was EnergyPlus. The analyses, energetic and economic, were performed through a comparison between the hotel without the CHP system and with the CHP system. The hypothetic simulated hotel was determined by a data survey on the energetic performance of hotels build in Porto Alegre. In addition to the energetic and economic studies, some parametric variations to the hotel were made to include a series of possible scenarios and check their economic viability. It was observed that the CHP can provide some operational cost reductions even without presenting a lower annual energetic consumption. In some scenarios, the time to return the investment showed figures lower than six years, being considered a good investment option.
Franceschin, Giada. "BIOETHANOL: A CONTRIBUTION TO BRIDGE THE GAP BETWEEN FIRST AND SECOND GENERATION PROCESSES." Doctoral thesis, Università degli studi di Padova, 2010. http://hdl.handle.net/11577/3427333.
Повний текст джерелаA causa del prezzo altalenante del petrolio, del consistente impatto ambientale provocato dal massiccio utilizzo di combustibili fossili e della sempre più concreta possibilità che queste fonti di energia stiano per esaurirsi, negli ultimi anni si è rinnovato l'interesse per la questione dell’approvvigionamento energetico. Le previsioni riguardo all’anno in cui si presenterà il picco di Hubbert (il punto di produzione massima, oltre il quale la produzione del petrolio può soltanto diminuire) sono soggette a incertezze derivanti dalle diverse assunzioni sull’aumento della popolazione mondiale, il consumo pro capite e le politiche energetiche adottate dai diversi Paesi, ma la necessità di cercare al più presto un’alternativa ai combustibili fossili è un dato di fatto. Cercare di sostituire, almeno in parte, i prodotti di origine fossile con altri basati su risorse di tipo rinnovabile può essere la soluzione a breve e medio periodo per ridurre la dipendenza dal petrolio ed evitare una crisi economica dalle conseguenze imprevedibili. Il problema energetico riguarda in particolare la crescita repentina della richiesta di prodotti petroliferi, per il settore dei trasporti, che si è ulteriormente aggravata con l’ingresso massiccio di Paesi emergenti, come Cina e India, nel mercato internazionale del greggio. Infatti, mentre per sopperire al fabbisogno di elettricità e calore esistono già alternative tecnologiche (come l’energia eolica, solare, geotermica e le biomasse), per il problema dei carburanti per autotrasporto la scelta si fa più ristretta a causa della necessità di disporre di un combustibile fluido che abbia un’alta densità energetica. Se poi si cerca un’alternativa a breve termine che permetta di mantenere l’attuale struttura logistica così come di utilizzare la tecnologia esistente, le possibilità si restringono ulteriormente. Bioetanolo e biodiesel sono i candidati più probabili a sostituire benzina e gasolio essenzialmente perché possono essere utilizzati nei motori attualmente disponibili e perché i processi di produzione sono già ben conosciuti. Il costo del biodiesel rappresenta il maggior ostacolo alla sua commercializzazione ed è principalmente dovuto al fatto che gli oli vegetali, utilizzati come materie prime, sono molto costosi. L’impiego di oli di scarto come materia prima, la possibilità di ottenere processi di trans esterificazione continui e il recupero di glicerolo con un elevato grado di purezza sono i primi passi da considerare per superare il problema. Ma un altro ostacolo ben più grave alla larga diffusione del biodiesel è la bassa produttività di oli vegetali per ettaro. Se si volesse sostituire anche solo il 5.75% dei 49.1 milioni di tonnellate equivalenti di petrolio che sono annualmente consumate in Italia come combustibile bisognerebbe convertire a coltivazioni energetiche almeno 3.2 milioni di ettari di terreno coltivato (Russi, 2008). Un altro problema da risolvere sarebbe lo smaltimento dei 0.4 milioni di tonnellate di glicerina prodotte. Le microalghe appaiono essere le sole specie vegetali potenzialmente in grado di sostituire una fetta importante del combustibile fossile, ma la loro produzione su larga scala non è ancora stata ottenuta con rese soddisfacenti. Il bioetanolo è l’altro principale candidato per la sostituzione della benzina. Al giorno d’oggi il bioetanolo di prima generazione (ottenuto da mais e canna da zucchero) è caratterizzato da un mercato maturo e tecnologie conosciute, ed è infatti il biocarburante maggiormente prodotto su scala mondiale. In particolare, l’etanolo ottenuto a partire da canna da zucchero, è economicamente vantaggioso (il costo di produzione si aggira sui 0.22 $/L) ed ha rese elevate. La canna da zucchero, però, cresce solamente in climi tropicali o sub tropicali e necessita di almeno 600 mm di precipitazioni annue. Di conseguenza in paesi come gli Stati Uniti e l’Europa tale materia prima non può essere presa in considerazione (The Economist, 2007). In questi casi il bioetanolo è ottenuto a partire dal mais ma, a causa del più complesso processo produttivo e del maggior costo della materia prima, il costo di produzione è maggiore del 30%. Il bioetanolo prodotto da mais ha svolto e sta svolgendo un ruolo sicuramente molto importante nell’aprire la strada verso i biocombustibili, ma non può essere considerato la soluzione né a lungo né a medio termine per le ragioni già citate, e soprattutto per questioni di natura etica derivanti dal fatto di utilizzare una risorsa alimentare per fini energetici. Il bioetanolo di seconda generazione sembrerebbe l’unica soluzione in grado di superare il problema. In questo caso le materie prime utilizzate possono essere, infatti, scarti dell’industria agro forestale, del legno e della carta, oppure possono essere ottenute tramite culture marginali in grado di crescere in terreni non adatti alle altre culture e con una quantità di acqua ridotta (Detchon et al., 2005). Le materie primi non sono in competizione con l’industria alimentare; e il processo di produzione, nel complesso, produce meno anidride carbonica dei processi di prima generazione (Deurwaarder, 2005). Sfortunatamente, sebbene il bioetanolo da materiali lignocellulosici stia catalizzando l’attenzione sia della ricerca sia delle politiche di molti paesi, il suo sviluppo su scala industriale non è ancora avvenuto. Al momento il problema principale è l’alto costo di produzione causato principalmente dall’elevato costo degli enzimi utilizzati nel processo (Balat and Balat, 2009). Il grande interesse da parte della comunità scientifica internazionale per la questione energetica e la conclusione che il bioetanolo nel breve periodo è uno dei candidati più probabili per la parziale sostituzione dei combustibili fossili sono state le ragioni che hanno portato allo sviluppo di questa tesi. Considerando che il bioetanolo da canna da zucchero è già economico ed il processo già ampiamente ottimizzato, l’attenzione è stata rivolta alla produzione di etanolo da mais e da materiali lignocellulosici. Lo scopo è stato quello di studiare i processi produttivi, focalizzando l’attenzione sugli aspetti che limitano una produzione economica nel primo caso e la diffusione su scala industriale nel secondo. Nel Capitolo 1 i due processi produttivi sono presentati assieme alle innovazioni apportate negli ultimi anni e lo stato dell’arte. Nel Capitolo 2 un tipico impianto di prima generazione è presentato in dettaglio, grazie ai risultati ottenuti dalla simulazione di processo con il software Aspen PlusTM. Una volta sviluppato il modello, l’impianto è stato ottimizzato a livello energetico e si sono eseguite alcune analisi di sensitività. In particolare si è esaminata la possibile influenza delle future innovazioni (mais con un contenuto più elevato in amido e lieviti maggiormente resistenti ad alte concentrazioni di etanolo) sulle prestazioni del processo. Considerazioni di tipo economico, ottenute grazie ai risultati delle simulazioni, hanno permesso di individuare il costo del mais come maggiore contributo al costo di produzione finale (68.8%), seguito dalle richieste energetiche del processo (16.2%). Considerata l’impossibilità di agire sul costo del mais che segue regole di mercato, si è focalizzata l’attenzione sulla possibilità di ridurre le richieste energetiche del processo, in particolare quelle della distillazione. L’analisi bibliografica presentata nel Capitolo 3 ha permesso di individuare nell’estrazione dell’etanolo mediante CO2 supercritica una possibile alternativa alla distillazione tradizionale. L’azeotropo acqua-etanolo può, infatti, essere eliminato in presenza di CO2 supercritica, e di conseguenza il bioetanolo anidro potrebbe essere ottenuto mediante un solo passaggio. A seguito dell’implementazione dell’equilibrio ternario nel software Aspen PlusTM l’estrazione supercritica è stata integrata nel processo di prima generazione. I risultati delle simulazioni e l’analisi economica presentati nel Capitolo 4 hanno portato alla conclusione che tale soluzione, sebbene presentata in letteratura come valida alternativa alla distillazione, sia svantaggiosa a causa dell’alto investimento di capitale richiesto e dei costi operativi elevati. Nei capitoli successivi sono stati esaminati i processi di seconda generazione. Tra tutti i tipi di pretrattamento quello con acqua calda sotto pressione è stato individuato come uno dei più promettenti, ed è stato quindi stato scelto come base per il presente lavoro di ricerca. Nei processi di seconda generazione la materia prima incide in maniera assai inferiore sul costo di produzione finale, in quanto possono essere utilizzati anche materiali di scarto, per cui gli aspetti energetici assumono un’importanza maggiore. In particolare il pretrattamento con acqua calda ha il vantaggio di non utilizzare altre sostanze chimiche, ma l’acqua deve essere portata ad alta temperatura e pressione, con conseguente aumento della richiesta energetica. Nel Capitolo 5 il processo di produzione di bioetanolo da paglia è stato simulato in dettaglio giungendo a dimostrare che i residui solidi del processo sono in grado di sostenere le richieste energetiche dello stesso anche con il pretrattamento ad acqua calda. Un altro grande problema del bioetanolo di seconda generazione è la non competitività economica. Nel Capitolo 6 si è scelto di verificare l’impatto di un secondo prodotto ad alto valore sulla profittabilità dell’intero processo. I risultati dell’analisi tecnoeconomica sulla contemporanea produzione di bioetanolo (dagli zuccheri a sei atomi di carbonio) e xilitolo (dallo xilosio) hanno dimostrato che anche impianti di media taglia possono diventare competitivi se viene considerata questa opzione. Nei Capitoli 7 e 8 sono presentati i risultati sperimentali ottenuti dal pretrattamento della crusca e della carta con acqua calda. In entrambi i casi è stato dimostrato che mediante pretrattamento seguito da idrolisi enzimatica è possibile ottenere zuccheri monomerici, i quali possono essere poi fermentati a etanolo. Infine nel Capitolo 9 sono proposti due semplici modelli in grado di rappresentare il pretrattamento con acqua calda in un reattore semi continuo. Tali modelli sono in grado di riprodurre quantitativamente l’andamento della solubilizzazione della biomassa alle diverse temperature, prevedere le concentrazioni di zuccheri monometrici e dei prodotti di degradazione.
Horák, Jakub. "Moderní bioplynová stanice jako součást „Smart Regions“." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232158.
Повний текст джерелаBoehnke, Jasper. "Business models for Micro CHP in residential buildings." kostenfrei, 2007. http://www.unisg.ch/www/edis.nsf/wwwDisplayIdentifier/3375.
Повний текст джерелаRuthberg, Richard, and Sebastian Wogenius. "Stochastic Modeling of Electricity Prices and the Impact on Balancing Power Investments." Thesis, KTH, Industriell ekonomi och organisation (Inst.), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-192111.
Повний текст джерелаI takt med att fler intermittenta förnyelsebara energikällor tillför el i dagens energisystem, blir också balanskraftens roll i dessa system allt viktigare. Vidare så har en ökning av andelen intermittenta förnyelsebara energikällor även effekten att de bidrar till lägre men också mer volatila elpriser. Därmed är även investeringar i balanskraft kopplade till stora risker med avseende på förväntade vinster, vilket gör att en god representation av elpriser är central vid investeringsbeslut. Vi föreslår en stokastisk flerfaktormodell för att simulera den långsiktiga dynamiken i elpriser som bas för värdering av generatortillgångar. Mer specifikt används modellen till att utvärdera effekten av elprisers dynamik på investeringsbeslut med avseende på balanskraft, där ett kraftvärmeverk studeras i detalj. Eftersom huvudmålet med ramverket är att skapa en långsiktig representation av elpriser så att deras fördelningsmässiga karakteristika bevaras, vilket i litteraturen citeras som regression mot medelvärde, säsongsvariationer, hög volatilitet och spikar, så utvärderas modellen i termer av årlig prisvaraktighet som beskriver fördelningen av elpriser över tid. Kärnan i ramverket utgår från Pilipovic-modellen av råvarupriser, men där vi utvecklar antaganden i ett flerfaktorramverk genom att lägga till en länkfunktion till tillgång- och efterfrågan på el samt utomhustemperatur. Vid användande av modellen som ett sätt att representera framtida priser, fås en maximal över- och underprediktion av prisvaraktighet om 9 procent, ett resultat som är bättre än det som ges av enklare modellering såsom säsongsprofiler eller enkla medelvärdesestimat som inte tar hänsyn till elprisernas fulla karakteristika. Till sist visar vi med modellens olika komponenter att variationer i elpriser, och därmed antaganden som används i långsiktig modellering, har stor betydelse med avseende på investeringsbeslut i balanskraft. Det realiserade värdet av flexibiliteten att producera el för ett kraftvärmeverk beräknas, vilket ger en värdering nära faktiska realiserade värden baserade på historiska priser och som enklare modeller inte kan konkurrera med. Slutligen visar detta också att inkluderandet av icke-konstant volatilitet och spikkarakteristika i investeringsbeslut ger ett högre förväntat värde av tillgångar som kan producera balanskraft, såsom kraftvärmeverk.
Hasasneh, Nabil M. "Chip multi-processors using a micro-threaded model." Thesis, University of Hull, 2006. http://hydra.hull.ac.uk/resources/hull:13609.
Повний текст джерелаZhou, Feng. "Contaminated Chi-square Modeling and Its Application in Microarray Data Analysis." UKnowledge, 2014. http://uknowledge.uky.edu/statistics_etds/7.
Повний текст джерелаDyer, Nigel. "Informative sequence-based models for fragment distributions in ChIP-seq, RNA-seq and ChIP-chip data." Thesis, University of Warwick, 2011. http://wrap.warwick.ac.uk/49963/.
Повний текст джерелаRocha, Erika da Justa Teixeira. "âModelagem da IntrusÃo Salina Utilizando Analise de Sensitividade Adjunta â Estudo de Caso: Cap-Bon/Tunisiaâ." Universidade Federal do CearÃ, 2011. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=6526.
Повний текст джерелаNos dias atuais a Ãgua se constitui em um bem natural que limita o desenvolvimento socioeconÃmico e, atà mesmo, a subsistÃncia da populaÃÃo. Como tentativa de minimizar o problema da escassez de Ãgua tem-se utilizado a explotaÃÃo da Ãgua subterrÃnea. Entretanto, esse crescimento da utilizaÃÃo de Ãguas subterrÃneas foi feito de forma desordenada e com a construÃÃo inadequada de poÃos. Essa prÃtica acabou por colocar em risco a qualidade das Ãguas subterrÃneas. Assim, a gestÃo dos recursos hÃdricos subterrÃneos tem se tornado um grande desafio. Essa tese propÃe o desenvolvimento um modelo para a simulaÃÃo de fluxo hÃdrico e de transporte de massa para problemas transientes em aqÃÃferos costeiros sujeitos à intrusÃo salina, por meio do desenvolvimento de um modelo numÃrico. Em seguida à desenvolvida uma anÃlise de sensitividade com o objetivo de possibilitar, atravÃs do melhor conhecimento dos parÃmetros locais e suas influÃncias, uma melhor adequaÃÃo do modelo à realidade.
Today the water is a natural well which limits the socioeconomic development and even the subsistence of the population. An attempt to minimize the problem of water scarcity has used the farming of groundwater. However, this growth of the use of groundwater was done inappropriately and with inadequate wells construction. This practice was eventually put at risk the quality of groundwater. Thus, the management of groundwater resources has become a major challenge. This thesis proposes developing a model for the simulation of water flow and mass transport for transient problems in coastal aquifers subject to saline intrusion, through the development of a numerical model. Then we developed a sensitivity analysis with the goal of enabling through better knowledge of local parameters and their influences, a best fit of model to reality.
Ricca, Steven. "Using a one-chip microcomputer to control an automated warehouse model." Ohio : Ohio University, 1988. http://www.ohiolink.edu/etd/view.cgi?ohiou1182869918.
Повний текст джерелаКниги з теми "CHP model"
Karrari, M. A simplified nonlinear model for a combined heat and power (CHP) system. Sheffield: University of Sheffield, Dept. of Control Engineering, 1990.
Знайти повний текст джерелаMillet CHP diyecek (mi?): "CHP'ye yeni örgüt ve çalışma modeli". Ankara: Berikan Yayınevi, 2017.
Знайти повний текст джерелаSai che he lun che. Taibei Shi: Shen deng chuang yi chu ban gu fen yu xian gong si, 1995.
Знайти повний текст джерелаFeng che he shui che. Taibei Shi: Shen deng chuang yi chu ban gu fen yu xian gong si, 1995.
Знайти повний текст джерелаCavalloro, P. System Level Design Model with RE-Use of System IP. Dordrecht: Springer, 2003.
Знайти повний текст джерелаHaase, Jan, ed. Models, Methods, and Tools for Complex Chip Design. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-01418-0.
Повний текст джерелаR, Schultz James, and Water Engineering Research Laboratory, eds. Model statewide compliance strategy incorporating the composite correction program (CCP) concept. Cincinnati, OH: U.S. Environmental Protection Agency, Water Engineering Research Laboratory, 1987.
Знайти повний текст джерелаPatrizia, Cavalloro, ed. System level design model with re-use of system IP. Boston: Kluwer Academic Publishers, 2003.
Знайти повний текст джерелаRushing, Charles Dennis. The Wakefield International Cup: A history, 1911-1995. Sutter Creek, CA (P.O. Box 1030, Sutter Creek 95685): C.D. Rushing, 1996.
Знайти повний текст джерелаSaarloos, Wim, and José Dijck. The Dutch Polder Model in science and research. NL Amsterdam: Amsterdam University Press, 2017. http://dx.doi.org/10.5117/9789462988163.
Повний текст джерелаЧастини книг з теми "CHP model"
Bartnik, Ryszard, Zbigniew Buryn, and Anna Hnydiuk-Stefan. "Continuous Time Methodology and Mathematical Model for Analysis of Technical and Economic Effectiveness of Modernizing a Thermal Plant and Combined Heat and Power Plant." In Investment Strategy in Heating and CHP, 33–53. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-61024-5_3.
Повний текст джерелаBiesinger, Andreas, Ruben Pesch, Mariela Cotrado, and Dirk Pietruschka. "Increased Efficiency Through Intelligent Networking of Producers and Consumers in Commercial Areas Using the Example of Robert Bosch GmbH." In iCity. Transformative Research for the Livable, Intelligent, and Sustainable City, 105–43. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92096-8_9.
Повний текст джерелаBorja, Ronaldo I. "Cap Models." In Plasticity, 117–44. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-38547-6_6.
Повний текст джерелаKempf, Torsten, Gerd Ascheid, and Rainer Leupers. "Analytical Implementation Model." In Multiprocessor Systems on Chip, 67–88. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-8153-0_6.
Повний текст джерелаBozinis, Nikolaos, Konstantinos I. Kouramas, and Efstratios N. Pistikopoulos. "MPC on a Chip." In Multi-Parametric Model-Based Control, 231–53. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2011. http://dx.doi.org/10.1002/9783527631230.ch10.
Повний текст джерелаKrattiger, Dimitri, and Mahmoud I. Hussein. "Modal Reduction of Lattice Material Models." In Dynamics of Lattice Materials, 199–215. Chichester, UK: John Wiley & Sons, Ltd, 2017. http://dx.doi.org/10.1002/9781118729588.ch9.
Повний текст джерелаKempf, Torsten, Gerd Ascheid, and Rainer Leupers. "Abstract Simulation Implementation Model." In Multiprocessor Systems on Chip, 89–130. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-8153-0_7.
Повний текст джерелаMarois, Guillaume, and Samir KC. "Converting a Cohort Component Model into a Microsimulation Model." In SpringerBriefs in Population Studies, 25–49. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-79111-7_3.
Повний текст джерелаCaporin, Massimiliano, and Michael McAleer. "Model Selection and Testing of Conditional and Stochastic Volatility Models." In Handbook of Volatility Models and Their Applications, 199–222. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118272039.ch8.
Повний текст джерелаMicouin, Patrice. "General Systems Theory." In Model-Based Systems Engineering, 1–24. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118579435.ch1.
Повний текст джерелаТези доповідей конференцій з теми "CHP model"
Cho, Heejin, Rogelio Luck, and Louay M. Chamra. "Power Generation and Heat Recovery Model of Reciprocating Internal Combustion Engines for CHP Applications." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-11634.
Повний текст джерелаChen, Binbin, Qinglai Guo, Bin Wang, Tian Xia, and Hongbin Sun. "Improved Model of CHP System Considering Heat Exchanger Capacity." In 2018 2nd IEEE Conference on Energy Internet and Energy System Integration (EI2). IEEE, 2018. http://dx.doi.org/10.1109/ei2.2018.8582191.
Повний текст джерелаMago, P. J., L. M. Chamra, and Alan Moran. "Modeling of Micro-Cooling, Heating, and Power (Micro-CHP) for Residential or Small Commercial Building Applications." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13558.
Повний текст джерелаRavn, Hans F., Jannik Riisom, and Camilla Schaumburg-Muller. "A stochastic unit commitment model for a local CHP plant." In 2005 IEEE Russia Power Tech. IEEE, 2005. http://dx.doi.org/10.1109/ptc.2005.4524370.
Повний текст джерелаOleksijs, Romans, and Olegs Linkevics. "Failure simulation model for evaluation of CHP electrical equipment reliability." In 2016 57th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON). IEEE, 2016. http://dx.doi.org/10.1109/rtucon.2016.7763139.
Повний текст джерелаCho, Heejin, Rogelio Luck, and Louay M. Chamra. "Dynamic Simulation of a Micro-CHP Facility: A Case Study." In ASME 2007 Energy Sustainability Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/es2007-36156.
Повний текст джерелаCho, Heejin, Rogelio Luck, and Louay M. Chamra. "Technical and Economical Analysis of a Micro-CHP Facility Based on Dynamic Simulation: A Case Study." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-41885.
Повний текст джерелаBalzarek, Stefanie, Kersten Kroger, and Jens Haubrock. "Designing a fuel cell model in application of a CHP-system." In 2015 IEEE Eindhoven PowerTech. IEEE, 2015. http://dx.doi.org/10.1109/ptc.2015.7232643.
Повний текст джерелаKortela, Jukka. "Nonlinear model predictive control for the industrial BioPower 5 CHP plant." In 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE, 2022. http://dx.doi.org/10.1109/etfa52439.2022.9921719.
Повний текст джерелаSmith, Amanda D., and Pedro J. Mago. "Impact of Thermal Storage Option for CHP Systems on the Optimal Prime Mover Size and the Need for Additional Heat Production." In ASME 2012 6th International Conference on Energy Sustainability collocated with the ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/es2012-91175.
Повний текст джерелаЗвіти організацій з теми "CHP model"
Nadal-Caraballo, Norberto C., Madison C. Yawn, Luke A. Aucoin, Meredith L. Carr, Jeffrey A. Melby, Efrain Ramos-Santiago, Victor M. Gonzalez, et al. Coastal Hazards System–Louisiana (CHS-LA). US Army Engineer Research and Development Center, August 2022. http://dx.doi.org/10.21079/11681/45286.
Повний текст джерелаPokorny, Richard, and Pavel R. Hrma. Mathematical Model of Cold Cap?Preliminary One-Dimensional Model Development. Office of Scientific and Technical Information (OSTI), March 2011. http://dx.doi.org/10.2172/1012879.
Повний текст джерелаNeises, Ty. System Advisor Model (SAM) Enhancements for CSP. Office of Scientific and Technical Information (OSTI), November 2015. http://dx.doi.org/10.2172/1505161.
Повний текст джерелаSharp, Jeremy, Locke Williams, Duncan Bryant, Jake Allgeier, Kevin Pigg, Gary Bell, and Dana Moses. Rough River Outlet Works physical model study. Engineer Research and Development Center (U.S.), June 2021. http://dx.doi.org/10.21079/11681/41043.
Повний текст джерелаChapman, Ray, Phu Luong, Sung-Chan Kim, and Earl Hayter. Development of three-dimensional wetting and drying algorithm for the Geophysical Scale Transport Multi-Block Hydrodynamic Sediment and Water Quality Transport Modeling System (GSMB). Engineer Research and Development Center (U.S.), July 2021. http://dx.doi.org/10.21079/11681/41085.
Повний текст джерелаPint, Bruce A., and Rishi R. Pillai. Lifetime Model Development for Supercritical CO2 CSP Systems. Office of Scientific and Technical Information (OSTI), May 2019. http://dx.doi.org/10.2172/1515655.
Повний текст джерелаSampson, James P., Debra S. Osborn, Emily Bullock-Yowell, Janet G. Lenz, Gary W. Peterson, Robert C. Reardon, V. Casey Dozier, Stephen J. Leierer, Seth C. W. Hayden, and Denise E. Saunders. An Introduction to Cognitive Information Processing Theory, Research, and Practice. Florida State University Libraries, August 2020. http://dx.doi.org/10.33009/fsu.1593091156.
Повний текст джерелаNadal-Caraballo, Norberto, Madison Yawn, Luke Aucoin, Meredith Carr, Jeffrey Melby, Efrain Ramos-Santiago, Fabian Garcia-Moreno, et al. Coastal Hazards System–Puerto Rico and US Virgin Islands (CHS-PR). Engineer Research and Development Center (U.S.), December 2022. http://dx.doi.org/10.21079/11681/46200.
Повний текст джерелаShen, Bo, and Jeffrey D. Munk. Cost-Optimized CCHP Model Developed Using HPDM Meeting Performance Targets. Office of Scientific and Technical Information (OSTI), August 2019. http://dx.doi.org/10.2172/1557522.
Повний текст джерелаParker, M. J., and R. P. Addis. Wind tunnel test of Teledyne Geotech model 1564B cup anemometer. Office of Scientific and Technical Information (OSTI), April 1991. http://dx.doi.org/10.2172/5825677.
Повний текст джерела