Добірка наукової літератури з теми "Chemical engineers"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Chemical engineers".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Chemical engineers"
Heydorn, K., and Elo Harald Hansen. "Metrology for chemical engineers." Accreditation and Quality Assurance 6, no. 2 (February 8, 2001): 75–77. http://dx.doi.org/10.1007/pl00010442.
Повний текст джерелаEmmert, Richard E. "Chemical Engineers: At the Forefront." Science 249, no. 4973 (September 7, 1990): 1094. http://dx.doi.org/10.1126/science.249.4973.1094.c.
Повний текст джерелаEmmert, Richard E. "Chemical Engineers: At the Forefront." Science 249, no. 4973 (September 7, 1990): 1094. http://dx.doi.org/10.1126/science.249.4973.1094-c.
Повний текст джерелаShallcross, D. C., and M. J. Parkinson. "Teaching Ethics to Chemical Engineers." Education for Chemical Engineers 1, no. 1 (January 2006): 49–54. http://dx.doi.org/10.1205/ece.05011.
Повний текст джерелаPeachey, B., R. Evitts, and G. Hill. "Project Management for Chemical Engineers." Education for Chemical Engineers 2, no. 1 (January 2007): 14–19. http://dx.doi.org/10.1205/ece06019.
Повний текст джерелаRossiter, J. A. "Introducing PI to chemical engineers." IFAC Proceedings Volumes 45, no. 11 (2012): 436–41. http://dx.doi.org/10.3182/20120619-3-ru-2024.00008.
Повний текст джерелаEmmert, R. E. "Chemical Engineers: At the Forefront." Science 249, no. 4973 (September 7, 1990): 1094. http://dx.doi.org/10.1126/science.249.4973.1094-b.
Повний текст джерелаShallcross, David C. "Teaching ethics to chemical engineers." Education for Chemical Engineers 5, no. 2 (May 2010): e13-e21. http://dx.doi.org/10.1016/j.ece.2009.12.001.
Повний текст джерелаOrazem, Mark E. "Editorial overview: If chemists make chemicals and chemical engineers make money, what do electrochemical engineers do?" Current Opinion in Electrochemistry 20 (April 2020): A2—A4. http://dx.doi.org/10.1016/j.coelec.2020.06.008.
Повний текст джерелаWilkinson, Derek. "Introducing CFD to Undergraduate Chemical Engineers." International Journal of Mechanical Engineering Education 26, no. 2 (April 1998): 126–32. http://dx.doi.org/10.1177/030641909802600204.
Повний текст джерелаДисертації з теми "Chemical engineers"
Gissing, Philip School of Science & Technology Studies UNSW. "Sir Philip Baxter, Engineer: The Fabric of a Conservative Style of Thought." Awarded by:University of New South Wales. School of Science and Technology Studies, 1999. http://handle.unsw.edu.au/1959.4/17017.
Повний текст джерелаMerchant, Shamel Sarfaraz. "Molecules to engines : combustion chemistry of alcohols and their application to advanced engines." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/98711.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (pages 237-266).
A major challenge in energy is the identification of viable liquid fuels as alternatives to petroleum-based fuels. There are a wide variety of candidate fuels to select from and assessing each new fuel is far from trivial. Small variations in chemical structure can cause large changes in a fuel's performance. Simultaneously, engine designs are also changing rapidly. Accurately predicting how new fuels will perform in future engines are in many ways more valuable than knowing which fuels perform well in today's engines. Predictive theoretical modeling is required to efficiently screen candidates. The selection of a good candidate fuel requires the development of detailed kinetic models capable of accurately predicting fuel behavior over the entire range of engine operating conditions. Despite the fact that most literature models succeed to accurately predict primary combustion products and high temperature ignition delay, two areas require further scientific understanding: peroxy chemistry and polycyclic aromatic hydrocarbon (PAH) formation. The first section of this thesis describes significant contributions to both these areas. Peroxy chemistry is important for accurately predicting ignition in future engine designs based on the concept of low temperature combustion (LTC). This thesis provides a clear explanation of how peroxy chemistry affects low temperature ignition behavior. Simple analytical expressions are provided for the time constant for radical growth and first-stage ignition delay. To improve the understanding of PAH formation, abintio calculations to indene and naphthalene from cyclopentadiene and cyclopentadienyl radical were performed. The calculated gas phase rate constants and thermochemistry were used to develop the first elementary micro-kinetic model for the formation of indene and naphthalene from cyclopentadiene. The model is validated against cyclopentadiene pyrolysis data in flow reactors. The second section of this thesis presents a combined computational-experimental approach to rapidly construct accurate combustion chemistry simulations for alcohol fuels. In this approach experiments and quantum chemical calculations are carried out in parallel, informing an evolving chemical kinetic model. This approach was used to understand and predictively model the combustion chemistry of iso-butanol and pentanol isomers. Detailed kinetic models for iso-butanol and pentanol isomers are presented which are validated against a large number of datasets spanning the entire range of operating conditions seen during real engine operation. We see that for many performance parameters, the model predictions are as accurate as experiment and help provide mechanistic insight into differing reactivity of a fuel's isomers. Lastly, we show how detailed kinetic model can be applied in multi-dimensional CFD simulations of a new type of engine, the reactivity controlled compression ignition engine (RCCI), in order to make predictions of how iso-butanol will affect the engine efficiency and emissions. This thesis covers the entire process of predictively accessing a fuel by taking a new fuel molecule, developing a detailed model, and evaluating it in a new engine design in order to make informed decisions.
by Shamel Sarfaraz Merchant.
Ph. D.
Brunelli, Andrea <1984>. "Advanced physico-chemical characterization of engineered nanomaterials in nanotoxicology." Doctoral thesis, Università Ca' Foscari Venezia, 2013. http://hdl.handle.net/10579/4656.
Повний текст джерелаThe extensive use of engineered nanomaterials (ENM) in both industrial and consumer products is triggering a growing attention on the potential risk of ENM posed to human health and the environment. Despite the intensive toxicological investigations, both in vitro and in vivo, only few of them have embedded a solid characterization approach, including the study of ENM before, during and after toxicological testing. Within EU-FP7 (ENPRA) and national (Toxicological and environmental behaviour of nano-sized titanium dioxide) projects activities, a comprehensive characterization of both inorganic (n-TiO2, n-ZnO, n-Ag) and organic (multiwalled carbon nanotubes, MWCNT) ENM was carried out, updating and adding primary characterization data, investigating particle size, shape, crystallite size, crystalline phases, specific surface area, pore volume as well as inorganic impurities of concern. Electron microscopy, X-ray diffraction, BET method and Inductively coupled plasma- mass spectrometry or optical spectroscopy were the employed techniques. With regard to the secondary characterization of ENM, the study was divided in: (a) assessing the engineered nanoparticles (ENP) behavior in biological (0.256 mg ENP/ml) as well as in real and synthetic waters (environmentally realistic concentrations: 0.01, 0.1, 1 and 10 mg n-TiO2 P25/l) over different time interval (24 h in biological media instead of 50 h in water media) to mimic duration of toxicological tests, by means of Dynamic Light Scattering (DLS), analytical centrifugation and nephelometry; (b) evaluating the ENM biodistribution in a secondary target organ (i.e. mice brain) after intratracheally instillation of ENM (0, 1, 4, 8, 16, 32, 64 and 128 ug ENM/animal tested), achieved by a microwave-assisted digestion method, followed by ICP-MS analysis, after selecting inorganic elements (i.e. Ti, Zn, Ag, Al and Co) as tracers of ENM presence in biological tissues. To investigate the ENP behavior in biological media and ENM biodistribution in mice, both dispersion protocols of the selected ENP and analytical protocols for ENM detection after toxicological testing were provided. The study of ENP stability in biological media highlighted that the fetal bovine serum (FBS) is the main parameter affected the ENP behavior. Among biological media tested, the largest size distributions, immediately after sample preparation, were irecorded for n-TiO2 NRCWE-003 dispersions. n-ZnO NM-111 dispersions were the most stable (12% average demixing, simulating 24 h of real sedimentation), except for Ag NM-300, originally received as dispersion (<1% average demixing). As expected, the ENP sedimentation rates investigated in the biological medium without any stabilizer (i.e. RPMI), were the highest for the whole set of ENP tested. In general, the highest sedimentation rates were recorded for n-TiO2 NM-101 and n-Ag 47MN-03 dispersions (51% average demixing, simulating 24 h of real sedimentation). The study of the n-TiO2 P25 stability in waters showed that agglomeration and sedimentation of n-TiO2 were mainly affected by the initial concentration. Sedimentation data fitted satisfactorily (R2 average: 0.90; 0.74
Kuforiji, Folashade. "The investigation of surface chemical and nanotopographical cues to engineer biointerfaces." Thesis, Keele University, 2015. http://eprints.keele.ac.uk/2351/.
Повний текст джерелаMiller, Shannon L. "Theory and implementation of low-irreversibility chemical engines /." May be available electronically:, 2009. http://proquest.umi.com/login?COPT=REJTPTU1MTUmSU5UPTAmVkVSPTI=&clientId=12498.
Повний текст джерелаTseng, Hsien-Chung Ph D. Massachusetts Institute of Technology. "Production of pentanol in metabolically engineered Escherichia coli." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/65767.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (p. 149-160).
Public concerns about global warming and energy security contribute to an ever-increasing focus on biologically-derived fuels, leading to significant interest in several candidate molecules capable of complementing petroleum-derived fuel resources. Ethanol, one of the most developed biofuels, is used extensively as a gasoline additive. However, the high water miscibility of ethanol creates corrosion problems when transporting the fuel by pipelines. Furthermore, the low energy density of ethanol limits its fuel efficiency. Thus, it is important to explore alternative biofuels with properties that are more similar to conventional gasoline. With a higher energy density, enhanced physical properties that would allow better integration with current infrastructure, pentanol represents an excellent alternative, and has the potential to be a replacement for gasoline. The primary objective of my thesis work is to construct pentanol biosynthetic pathways in Escherichia coli, offering the possibility of producing pentanol from renewable carbon sources through microbial fermentations. We used butanol synthesis as a platform from which microbial synthesis of pentanol can be obtained. To explore the possibility of employing the butanol pathway enzymes for pentanol biosynthesis, we implemented a bypass/feeding strategy to thoroughly evaluate the ability of those enzymes to act on five-carbon substrates. Additionally, by boosting the intracellular NADH availability, we achieved up to 85 mg/L pentanol from glucose and propionate, providing an initial proof-of-concept of a functional and feasible pentanol biosynthetic pathway in E. coli. Furthermore, a platform pathway was established for synthesis of value-added chiral 3-hydroxyalkanoic acids with applications ranging from chiral building blocks to high-value pharmaceuticals. Of significance, such pathway was constructed as one portion of the pentanol pathway, illustrating versatility of our pentanol pathway as it can be modularized for synthesis of various valuable chemicals. Altogether, our results suggest that direct microbial synthesis of pentanol solely from glucose or glycerol can be realized once an efficient redox balancing within the recombinant strains is ensured. As construction of desired biosynthetic pathways is just the first step toward economically viable pentanol production, increasing the titer, yield, and productivity will ultimately determine the feasibility of such pathways.
by Hsien-Chung Tseng.
Ph.D.
Algharrawi, Khalid Hussein Rheima. "Production of methlxanthines by metabolically engineered E. coli." Diss., University of Iowa, 2017. https://ir.uiowa.edu/etd/5904.
Повний текст джерелаDomagalski, Jakub. "Electrochemically engineered anodic alumina Nanotubes: physico-chemical properties and Applications." Doctoral thesis, Universitat Rovira i Virgili, 2021. http://hdl.handle.net/10803/671688.
Повний текст джерелаLa anodización del aluminio tiene casi un siglo de historia. La alúmina anódica se utilizó inicialmente como recubrimiento protector, pero el desarrollo de la microscopía electrónica reveló la morfología porosa de este óxido. Este descubrimiento animó a los investigadores a desarrollar nuevos métodos de fabricación de la alúmina porosa, obteniendo así geometrías complejas con diversas propiedades. En esta tesis se desarrollan nanotubos de alúmina anódica (AANTs) a través de un proceso de anodización que se conoce como anodización por pulsos. El proceso consiste en entrelazar pulsos de corriente de baja (~ 6 mA / cm2) y alta (~ 290-390 mA / cm2) densidad. Un flujo de corriente suficientemente alto afecta a la formación de la estructura, resultando en un estrechamiento vertical de los poros y uniones entre celdas más débiles. El ataque electroquímico selectivo y la sonicación en agua de la estructura resultante permiten producir coloides de nanotubos. El primer objetivo de esta tesis es un análisis exhaustivo del proceso para comprender mejor el mecanismo de formación de los AANTs y conectar con precisión las condiciones de anodización con la geometría resultante de la estructura. El segundo objetivo es evaluar y optimizar su posprocesado, investigando nuevas posibilidades de alterar las propiedades fisicoquímicas de los AANT. El último objetivo es diseñar y fabricar nanotubos funcionales y proponer sus aplicaciones. Este trabajo investiga la evolución del perfil de anodización en función de las condiciones del proceso de anodización. Además, la corriente y el potencial del proceso se asocian con la geometría y las propiedades de los nanotubos obtenidos: longitud, diámetro interno y externo, potencial Z y dispersión de tamaño. En resumen, una corriente más alta conduce a nanotubos más largos y estrechos con una carga superficial más baja. Se evalúan las condiciones de sonicación proponiendo un conjunto de parámetros más óptimo. Se demuestra que el recocido a alta temperatura de los nanotubos tiene un impacto en su estructura cristalina y composición elemental: el aumento de temperatura produce una fracción cristalina más alta y disminuye su contenido de azufre. Posteriormente, los nanotubos se decoran electrostáticamente con nanopartículas de maghemita y se modifica su interior con una proteína marcada con
Most of the time since its discovery, nanoporous anodic alumina was used as a protective coating. The intrinsic property revealed by the electron microscope – porosity – encouraged researchers to investigate new methods of porous alumina fabrication, obtaining complex geometries with various properties. In this thesis, anodic alumina nanotubes (AANTs) are developed through a carefully adjusted anodization process defined as pulse anodization. The process consists of interlacing current pulses of low (~6 mA/cm2) and high (~290-390 mA/cm2) density. Sufficiently high current flow affects the formation of the structure, resulting in vertical pore narrowings and weaker cell junctions. Selective acid etching and sonication in water enables to yield colloids of nanotubes. First aim of this thesis is a thorough analysis of the process to better understand the formation mechanism of AANTs and precisely connect anodization conditions with the resultant geometry of the structure. Second goal is to evaluate and optimize post-processing investigating further possibilities to alter physio-chemical properties of AANTs. Last objective is to design and fabricate functional nanotubes and propose their applications. This work reports the evolution of the anodization profile depending on the process conditions. Further, current and potential of the process are associated with the geometry and the properties of the obtained nanotubes: length, inner and outer diameter, z-potential and size dispersity. In brief, higher current leads to longer and narrower nanotubes with lower surface charge. Sonication conditions are evaluated leading to the proposal of a more optimal set of parameters. Annealing of the nanotubes is demonstrated to impact on their crystalline structure and elemental composition: temperature increase leads to higher crystalline fraction and decrease their sulfur content. Nanotubes are later electrostatically-decorated with maghemite nanoparticles and modified inside with a fluorophore labelled protein. These magnetically responsive colloids demonstrate stimuli-responsive detection of cathepsin B, supporting its utility as a sensor.
Basim, Gul Bahar. "Formulation of engineered particulate systems for chemical mechanical polishing applications." [Gainesville, Fla.] : University of Florida, 2002. http://purl.fcla.edu/fcla/etd/UFE1001115.
Повний текст джерелаKhan, Ahmed Faraz. "Chemical kinetics modelling of combustion processes in SI engines." Thesis, University of Leeds, 2014. http://etheses.whiterose.ac.uk/7554/.
Повний текст джерелаКниги з теми "Chemical engineers"
1924-, Perry Robert H., Green Don W, and Maloney James O, eds. Perry's chemical engineers' handbook. 7th ed. New York: McGraw-Hill, 1997.
Знайти повний текст джерелаGriskey, Richard G. Chemical engineers' portable handbook. New York: McGraw-Hill, 2000.
Знайти повний текст джерелаSalaheldeen Elnashaie, Said, Firoozeh Danafar, and Hassan Hashemipour Rafsanjani. Nanotechnology for Chemical Engineers. Singapore: Springer Singapore, 2015. http://dx.doi.org/10.1007/978-981-287-496-2.
Повний текст джерела1924-1978, Perry Robert H., and Green Don W, eds. Perry's chemical engineers' handbook. 8th ed. New York: McGraw-Hill, 2008.
Знайти повний текст джерелаMaynard, Richard. Opportunities for chemical engineers. Manchester: Central Services Unit for University and Polytechnic Careers and Appointments Services, 1985.
Знайти повний текст джерелаde Nevers, Noel. Physical and Chemical Equilibrium for Chemical Engineers. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118135341.
Повний текст джерелаNevers, Noel De. Physical and chemical equilibrium for chemical engineers. 2nd ed. Hoboken, N.J: Wiley, 2012.
Знайти повний текст джерелаWalas, Stanley M. Reaction kinetics for chemical engineers. Boston: Butterworths, 1989.
Знайти повний текст джерелаWright, Dennis. Basic Programs for Chemical Engineers. Dordrecht: Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4121-2.
Повний текст джерелаWright, Dennis. Basic Programs for Chemical Engineers. Dordrecht: Springer Netherlands, 1986.
Знайти повний текст джерелаЧастини книг з теми "Chemical engineers"
Turner, J. C. R. "Chemical Thermodynamics for Chemical Engineers." In Teaching Thermodynamics, 471–73. Boston, MA: Springer US, 1985. http://dx.doi.org/10.1007/978-1-4613-2163-7_49.
Повний текст джерелаSchmidt, Achim. "Chemical Reactions." In Technical Thermodynamics for Engineers, 733–69. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20397-9_24.
Повний текст джерелаWatson, Keith L. "Chemical Bonding." In Foundation Science for Engineers, 134–43. London: Macmillan Education UK, 1993. http://dx.doi.org/10.1007/978-1-349-12450-3_15.
Повний текст джерелаWatson, Keith L. "Chemical Bonding." In Foundation Science for Engineers, 141–50. London: Macmillan Education UK, 1998. http://dx.doi.org/10.1007/978-1-349-14714-4_16.
Повний текст джерелаSchmidt, Achim. "Chemical Reactions." In Technical Thermodynamics for Engineers, 799–843. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-97150-2_24.
Повний текст джерелаSalaheldeen Elnashaie, Said, Firoozeh Danafar, and Hassan Hashemipour Rafsanjani. "Chemical Engineering from Technology to Engineering." In Nanotechnology for Chemical Engineers, 1–77. Singapore: Springer Singapore, 2015. http://dx.doi.org/10.1007/978-981-287-496-2_1.
Повний текст джерелаSalaheldeen Elnashaie, Said, Firoozeh Danafar, and Hassan Hashemipour Rafsanjani. "From Nanotechnology to Nanoengineering." In Nanotechnology for Chemical Engineers, 79–178. Singapore: Springer Singapore, 2015. http://dx.doi.org/10.1007/978-981-287-496-2_2.
Повний текст джерелаSalaheldeen Elnashaie, Said, Firoozeh Danafar, and Hassan Hashemipour Rafsanjani. "Learning Synergism in Nanotechnology and Chemical Engineering by Case Study." In Nanotechnology for Chemical Engineers, 179–272. Singapore: Springer Singapore, 2015. http://dx.doi.org/10.1007/978-981-287-496-2_3.
Повний текст джерелаSalaheldeen Elnashaie, Said, Firoozeh Danafar, and Hassan Hashemipour Rafsanjani. "Conclusions and Outlook." In Nanotechnology for Chemical Engineers, 273. Singapore: Springer Singapore, 2015. http://dx.doi.org/10.1007/978-981-287-496-2_4.
Повний текст джерелаHan, Kyonghee, and Gary Lee Downey. "Engineers for Heavy and Chemical Industries: 1970–1979." In Engineers for Korea, 77–99. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-031-02128-2_4.
Повний текст джерелаТези доповідей конференцій з теми "Chemical engineers"
Shageeva, Farida T., and Vasiliy G. Ivanov. "Contemporary technologies for training future chemical engineers." In 2013 International Conference on Interactive Collaborative Learning (ICL). IEEE, 2013. http://dx.doi.org/10.1109/icl.2013.6644546.
Повний текст джерелаShageeva, Farida Tagirovna, and Luiza Ravilevna Nazmieva. "Module technologies in training chemical-process engineers." In 2012 15th International Conference on Interactive Collaborative Learning (ICL). IEEE, 2012. http://dx.doi.org/10.1109/icl.2012.6402189.
Повний текст джерелаRuiz-Rosas, Ramiro, Ángel Berenguer-Murcia, and Rosa Torregrosa-Maciá. "MATLAB GAMIFICATION OF REACTION KINETICS FOR CHEMICAL ENGINEERS." In International Conference on Education and New Learning Technologies. IATED, 2017. http://dx.doi.org/10.21125/edulearn.2017.1528.
Повний текст джерелаGarcia, Sebastian, Antonio Parejo, Carlos Leon, and Joaquin Luque. "Teaching electronics to chemical engineers: the pandemic opportunity." In 2022 Congreso de Tecnología, Aprendizaje y Enseñanza de la Electrónica (XV Technologies Applied to Electronics Teaching Conference (TAEE). IEEE, 2022. http://dx.doi.org/10.1109/taee54169.2022.9840566.
Повний текст джерелаYurkiv, Taras. "Continuous Improvement in Education of Chemical Engineers and Researchers in the United States." In Chemical technology and engineering. Lviv Polytechnic National University, 2019. http://dx.doi.org/10.23939/cte2019.01.117.
Повний текст джерелаChauhan, Shailesh. "Ex inspections — A journey for maintenance engineers." In 2014 Petroleum and Chemical Industry Conference Europe (PCIC Europe). IEEE, 2014. http://dx.doi.org/10.1109/pciceurope.2014.6900058.
Повний текст джерелаOveissi, Farshad, and Amirali Ebrahimi Ghadi. "Preparing Chemical Engineers for Industry 4.0: An Interactive Education Approach." In 9th Research in Engineering Education Symposium & 32nd Australasian Association for Engineering Education Conference. https://reen.co/: Research in Enineering Education Network (REEN), 2022. http://dx.doi.org/10.52202/066488-0008.
Повний текст джерелаZiyatdinov, Nadir N., Tatyana V. Lapteva, and Gennady M. Ostrovsky. "Place and role of modern optimization methods in training chemical engineers." In 2013 International Conference on Interactive Collaborative Learning (ICL). IEEE, 2013. http://dx.doi.org/10.1109/icl.2013.6644648.
Повний текст джерелаKhaletski, Vitali. "CONTENT LINES IN DESIGN OF CHEMICAL EDUCATION FOR WOULD-BE ENGINEERS." In 1st International Baltic Symposium on Science and Technology Education. Scientia Socialis Ltd., 2015. http://dx.doi.org/10.33225/balticste/2015.59.
Повний текст джерелаSchoenung, Julie M. "Teaching green topics to chemical engineers: Innovation in the process design curriculum." In 2009 IEEE International Symposium on Sustainable Systems and Technology (ISSST). IEEE, 2009. http://dx.doi.org/10.1109/issst.2009.5156754.
Повний текст джерелаЗвіти організацій з теми "Chemical engineers"
Vora, Mehul Arun, Steinar Sanni, and Roger Flage. Environmental Risk Assessment (ERA) of IOR solutions on the Norwegian Continental Shelf. University of Stavanger, November 2021. http://dx.doi.org/10.31265/usps.209.
Повний текст джерелаWilkins, Justin, Andrew McQueen, Joshua LeMonte, and Burton Suedel. Initial survey of microplastics in bottom sediments from United States waterways. Engineer Research and Development Center (U.S.), September 2021. http://dx.doi.org/10.21079/11681/42021.
Повний текст джерелаKennedy, Alan, Andrew McQueen, Mark Ballentine, Brianna Fernando, Lauren May, Jonna Boyda, Christopher Williams, and Michael Bortner. Sustainable harmful algal bloom mitigation by 3D printed photocatalytic oxidation devices (3D-PODs). Engineer Research and Development Center (U.S.), April 2022. http://dx.doi.org/10.21079/11681/43980.
Повний текст джерелаRogers, Joseph E. L. American Institute of Chemical Engineers Final report for Office of Industrial Technologies, U.S. Department of Energy. Collaborative research (DE-FC02-94CE41107) [Technology transfer and educational activities in the area of industrial waste reduction and pollution prevention]. Office of Scientific and Technical Information (OSTI), January 2003. http://dx.doi.org/10.2172/808648.
Повний текст джерелаRose, Peter, E. Chemical Stimulation of Engineered Geothermal Systems. Office of Scientific and Technical Information (OSTI), August 2008. http://dx.doi.org/10.2172/935668.
Повний текст джерелаR. Jarek. ENGINEERED BARRIER SYSTEM: PHYSICAL AND CHEMICAL ENVIRONMENT. Office of Scientific and Technical Information (OSTI), August 2005. http://dx.doi.org/10.2172/883417.
Повний текст джерелаP. Dixon. Engineered Barrier System: Physical and Chemical Environment. Office of Scientific and Technical Information (OSTI), April 2004. http://dx.doi.org/10.2172/837502.
Повний текст джерелаR. Jarek. ENGINEERED BARRIER SYSTEM: PHYSICAL AND CHEMICAL ENVIRONMENT. Office of Scientific and Technical Information (OSTI), November 2004. http://dx.doi.org/10.2172/859410.
Повний текст джерелаG.H. Nieder-Westermann. ENGINEERED BARRIER SYSTEM: PHYSICAL AND CHEMICAL ENVIRONMENT. Office of Scientific and Technical Information (OSTI), April 2005. http://dx.doi.org/10.2172/861095.
Повний текст джерелаMoore, David, Damarys Acevedo-Acevedo, and Philip Gidley. Application of clean dredged material to facilitate contaminated sediment source control. Engineer Research and Development Center (U.S.), September 2022. http://dx.doi.org/10.21079/11681/45342.
Повний текст джерела