Добірка наукової літератури з теми "Cantor alloy"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Cantor alloy".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Cantor alloy"
Glatzel, Uwe, Felix Schleifer, Christian Gadelmeier, Fabian Krieg, Moritz Müller, Mike Mosbacher, and Rainer Völkl. "Quantification of Solid Solution Strengthening and Internal Stresses through Creep Testing of Ni-Containing Single Crystals at 980 °C." Metals 11, no. 7 (July 16, 2021): 1130. http://dx.doi.org/10.3390/met11071130.
Повний текст джерелаZhang, Xiangkai, Hanting Ye, Jacob C. Huang, Taiyou Liu, Pinhung Lin, Yaocheng Wu, Mintsang Tsai, Yuchin Liao, and Jason S. C. Jang. "Nano-Scaled Creep Response of TiAlV Low Density Medium Entropy Alloy at Elevated Temperatures." Materials 13, no. 1 (December 20, 2019): 36. http://dx.doi.org/10.3390/ma13010036.
Повний текст джерелаYamanaka, Syuki, Ken-ichi Ikeda, and Seiji Miura. "The effect of titanium and silicon addition on phase equilibrium and mechanical properties of CoCrFeMnNi-based high entropy alloy." Journal of Materials Research 36, no. 10 (May 28, 2021): 2056–70. http://dx.doi.org/10.1557/s43578-021-00251-0.
Повний текст джерелаBabić, Emil, Đuro Drobac, Ignacio Alejandro Figueroa, Mathilde Laurent-Brocq, Željko Marohnić, Vesna Mikšić Trontl, Damir Pajić, et al. "Transition from High-Entropy to Conventional Alloys: Which Are Better?" Materials 14, no. 19 (October 5, 2021): 5824. http://dx.doi.org/10.3390/ma14195824.
Повний текст джерелаCampari, Enrico Gianfranco, Angelo Casagrande, Elena Colombini, Magdalena Lassinantti Gualtieri, and Paolo Veronesi. "The Effect of Zr Addition on Melting Temperature, Microstructure, Recrystallization and Mechanical Properties of a Cantor High Entropy Alloy." Materials 14, no. 20 (October 12, 2021): 5994. http://dx.doi.org/10.3390/ma14205994.
Повний текст джерелаLedieu, J., M. Feuerbacher, C. Thomas, M. C. de Weerd, S. Šturm, M. Podlogar, J. Ghanbaja, S. Migot, M. Sicot, and V. Fournée. "The (110) and (320) surfaces of a Cantor alloy." Acta Materialia 209 (May 2021): 116790. http://dx.doi.org/10.1016/j.actamat.2021.116790.
Повний текст джерелаGromov, V. E., Yu A. Rubannikova, S. V. Konovalov, K. A. Osintsev, and S. V. Vorob’ev. "Generation of increased mechanical properties of Cantor highentropy alloy." Izvestiya. Ferrous Metallurgy 64, no. 8 (September 2, 2021): 599–605. http://dx.doi.org/10.17073/0368-0797-2021-8-599-605.
Повний текст джерелаKang, You Bin, Seung Min Oh, Kap Ho Lee, and Sun Ig Hong. "Stress-Strain Responses of Multi-Phase CoCrCuMnNi and CoCrMnFeCu Alloys." Key Engineering Materials 765 (March 2018): 166–72. http://dx.doi.org/10.4028/www.scientific.net/kem.765.166.
Повний текст джерелаBrotzu, Andrea, Stefano Natali, Zortea Laura, and De Filippo Barbara. "High Entropy Cantor Alloys (HEAs) modification induced by tungsten alligation, heat treatment and deep cold plastic deformation." Frattura ed Integrità Strutturale 17, no. 63 (December 21, 2022): 309–20. http://dx.doi.org/10.3221/igf-esis.63.24.
Повний текст джерелаKo, Jun Yeong, and Sun Ig Hong. "Effect of Carbon Addition on the Cast and Rolled Microstructures of FeCoCrNiMn High Entropy Alloys." Key Engineering Materials 737 (June 2017): 16–20. http://dx.doi.org/10.4028/www.scientific.net/kem.737.16.
Повний текст джерелаДисертації з теми "Cantor alloy"
Sarvaria, Anushruti. "The differential role of regulatory B cells in cancer and allo-immunity." Thesis, Imperial College London, 2015. http://hdl.handle.net/10044/1/55298.
Повний текст джерелаLopes, Denise Adorno. "Caracterização microestrutural de ligas do sistema U-Nb-Zr, no canto rico em urânio." Universidade de São Paulo, 2010. http://www.teses.usp.br/teses/disponiveis/3/3133/tde-28022011-153908/.
Повний текст джерелаThe microstructures of 10 uranium-rich alloys of the uraniumniobium (U-10Nb; U-15Nb; U-20Nb), uranium-zirconium (U-10Zr; U- 15Zr;U-20Zr) and uranium-niobium-zirconium (U-2.5Nb-2.5Zr; U-5Nb-5Zr; U-7.5Nb-7.5Zr; U-10Nb-10Zr)systems have been characterized. The studied alloys are considered for plate-type nuclear fuels fabrication used both in nuclear research reactors and in nuclear power reactors. The alloys were melted by arc plasma methods employing nonconsumable tungsten cathode. After several fusions, samples were subjected to homogenizing heat treatment at 1000ºC for 96 hours and then quenched in water. Then the samples were annealed at 700 and 500ºC. The microstructural characterization encompassed 40 samples of 10 different alloys composition in four different conditions: as cast, homogenized at 1000°C and aged at 700 and 500ºC. Microstructural characterization was performed using several complementary techniques: optical microscopy; scanning electron microscopy with energy-dispersive X-ray analysis; X-ray diffraction with the aid of the Rietveld analysis method; and Vickers microhardness measurements. The results showed that the Nb and Zr additions have stabilized the uranium γ-phase and delayed the γ and β phase transformation. In this regard, Nb was more effective than Zr. However, during cooling martensitic transformations γ→α\', β→α\' and possibly γ→γ° may occur. The martensitic transformation start temperature (Ms), which produces the phase , decreased with Nb and Zr additions. Ms intersected room temperature between the compositions U-5Nb-5Zr e U- 7,5Nb-7,5Zr. It was found that the peritectoid reaction α + γ2 → δ of the U-Zr system showed a very slow kinetics and could not be detected in the range of the studied times and temperatures. An important result of the technological point of view is that in some alloys it was possible to retain at room temperature a ductile martensitic microstructure, allowing cold forming.
Van, der Walt Jacobus Gert. "Radiation field shaping through low temperature thermal-spray in radiotheraphy." Thesis, Bloemfontein : Central University of Technology, Free State, 2009. http://hdl.handle.net/11462/116.
Повний текст джерелаSuperficial cancerous lesions are commonly treated through low energy X-ray or electron radiation in radiotherapy. The treatment units that produce the radiation are equipped with square, rectangular and round applicators of different sizes. These applicators attach to the treatment units and define the radiation field size applied during treatment. An applicator is chosen to fit the shape of the cancerous lesion on the patient as closely as possible. Since cancerous lesions are irregular in shape, there will always be an area of healthy tissue between the edge of the lesion and the edge of the standard field shape. This healthy tissue will be irradiated along with the lesion during treatment which is undesirable since the cancer wound heals through reparative growth of the surrounding healthy tissue after treatment. Traditional techniques that were developed to shield this healthy tissue and thus shape the radiation field to the shape of the lesion present various shortcomings. This study introduces a new thermal-spray process for producing radiation field shaping shields which overcomes most of the shortcomings encountered with the traditional field shaping techniques. Since none of the commercially available thermal-spray equipment could be used to produce field shaping shields, new thermal-spray equipment was designed and fabricated tailor made to the application. Different techniques to determine the contours of the treatment area on the patient were investigated. These included a patient contact technique using a plaster bandage impression and a non-contact technique using 3D laser scanning. From the plaster bandage impression a plaster model can be produced onto which a high density low melt material such as Wood’ s alloy can be thermally sprayed to produce a field shaping mask. A model can also be produced from the 3D laser scanning data through laser sintering (LS) in nylon polyamide powder or through computer numerical controlled (CNC) milling in a block of low density polyurethane. The thermal-spray technique was evaluated by comparing the field shaping ability of radiation shields produced through the technique to the field shaping ability of shields produced through the traditional techniques. Radiographic film was used for this purpose and the results are presented in the form of isodensity charts. The required thicknesses of thermal-sprayed field shaping masks to shield radiation of various energies were also determined. The thicknesses were determined through radiation transmission measurements of known thicknesses of sprayed sheets of Wood’ s alloy. X-ray imaging showed that there were no defects present within thermal-sprayed layers of Wood’ s alloy that may negatively affect the shielding ability of masks produced through the technique.
Basso, Hellem Cristine de Souza. "Avaliação da influência dosimétrica dos implantes dentários de titânio em VMAT de cabeça e pescoço." Universidade Tecnológica Federal do Paraná, 2015. http://repositorio.utfpr.edu.br/jspui/handle/1/1422.
Повний текст джерелаThe head and neck cancer is more prevalent in men, predominantly middle or elderly age, featuring a group of individuals with high probability of having done osseointegrated dental implants. Most of these implants are made of titanium and the interaction of X-ray photons with this high atomic number material and high electron density generates scattering and disturbance on radiation dose in their interfaces, generating dosimetric uncertainties in the head and neck radiotherapy treatments. The aim of this study is to assess the dosimetric impact of dental implants of titanium in head and neck VMAT. For this, irradiation of phantom was performed in the presence of a titanium dental implant for direct field and with application of CShape Easy and Head and Neck tests proposed by the TG 119, adapted to VMAT. The planning of these cases was conducted according to criteria determined by the AAPM, with Monaco 5.0 software, and the treatment is in Linear Accelerator Synergy Elekta. The measurements were performed with Semiflex ionization chamber and electrometer US PTW, radiochromic film GafChromic EBT3 scanned with the Epson Expression XL scanner and analysis with the software VeriSoft 6.0. The results of the distribution and dose profiles found in direct irradiation field show that the presence of titanium dental implant causes significant dose disturbance. Due to the presence of the material was also increased the difference between the calculated and the measured dose when compared to irradiation of the homogeneous phantom. But in the dosimetry of TG 119 cases this difference was irrelevant. The dose calculated by the software and the measure with the ionization chamber had negligible differences, as well as the consent of the gamma criterion for cases with and without the presence of dental titanium implant. The results are satisfactory and consistent with other author’s tests in homogeneous phantoms. The impact of dental titanium implant presence can be minimized through the manual delimitation of the metal object and artifact generated and by assigning the electron density values corrected them, and include them as organs with dose constraints on optimization planning. From the testing CShape Easy and Head and Neck TG 119 of the AAPM, we have verified that following the recommendations described, the planning system Monaco 5.0 is capable of performing dose calculations with high degree of accuracy for head and neck VMAT in patients with titanium dental implant.
CHANG, YUNG-HSIANG, and 張詠翔. "Cancer Theranostic Application of FeAu Alloy Nanoparticles Conjugated with MMP-1 Antibody." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/3mv98p.
Повний текст джерела國立臺北科技大學
化學工程與生物科技系化學工程碩士班
107
In this study, iron-gold alloy nanoparticles (FeAu NPs) were synthesized by the pyrolysis method. The antibodies of the cancer biomarker protein matrix metalloproteinase-1 (antiMMP1) was modified on the surface of the FeAu NPs. Significantly, anti-MMP1-FeAu NPs were used for the diagnosis and hyperthermia treatment of cancer. The average particle size of FeAu NPs and anti-MMP1-FeAu NPs were 8.51±2.66 nm and 10.64±3.46 nm, respectively. TEM-EDS results showed that the gold and iron were in the molar ratio 1:1. Characterization using superconducting quantum interference device (SQUID) indicated that the nanoparticle showed no remanence, and it was superparamagnetic in nature under ±20000 Oe magnetic field at 300K. The saturation magnetization was 5.77 emu/g for FeAu NPs and 6.44 emu/g for antiMMP1-FeAu NPs. The investigations using Raman, FTIR and UV-Vis spectrometer confirmed that MMP-1 antibody was successfully modified on the surface of nanoparticles. The FeAu NPs with a concentration of 5 mg/mL showed a raise of temperature to 45℃ when exposed for 600 seconds under high-frequency induction heater machine (HF-IHM) with a frequency of 700 to 1100 KHz, which confirmed the suitability for magnetic hyperthermia therapy of cancer. The results of cytotoxicity test using mouse fibroblasts cell (L929) and human oral squamous carcinoma cells (HSC-3) showed that FeAu NPs and antiMMP1-FeAu NPs did not have significant cytotoxicity at a concentration less than 62.5 μg/mL. Cellular viability was 50% for L929 and 20% for HSC-3 at the concentration of 1 mg/mL. After magnetic heating treatment of oral squamous carcinoma cells with HF-IHM for the concentration of 100 μg/mL FeAu NPs and antiMMP1-FeAu NPs, it is known that the survival rate of cancer cells decreased with longer heating time. After 10 minutes magnetic heat treatment, the cellular survival rate was 30%, and the survival rate of antiMMP1-FeAu was only 18%. The results indicated that antiMMP1-FeAu NPs had better treatment efficiency than FeAu NPs. Observations by TEM showed that oral squamous carcinoma cells endocytosed certain amount of antiMMP1-FeAu NPs and FeAu NPs. The endocytosis of antiMMP1-FeAu was more obvious in oral squamous cancer cells, and intracellular uptake of antiMMP1-FeAu was higher than FeAu NPs through inductively coupled plasma atomic emission spectrometry (ICP-AES) investigation. In addition, the FeAu NPs would emit fluorescence using confocal microscope observation under 515 nm laser. Based on the above experimental results, antiMMP1-FeAu has a great potential for the application of cancer theranostic.
Kluber, Heidi Ellen. "Cancer Alley and infant mortality : is there a correlation?" Thesis, 2011. http://hdl.handle.net/2152/ETD-UT-2011-12-4417.
Повний текст джерелаtext
Hopkins, Deidre N. "Determination of the linear attenuation coefficients and buildup factors of MCP-96 alloy for use in tissue compensation and radiation protection." 2010. http://liblink.bsu.edu/uhtbin/catkey/1604330.
Повний текст джерелаDepartment of Physics and Astronomy
Bruxel, Laerson. "Democracia, Deliberação e Mídia na Esfera Pública Contemporânea: um Estudo sobre Experiênciasa Referendárias no Brasil e em Portugal." Doctoral thesis, 2011. http://hdl.handle.net/10316/20165.
Повний текст джерелаA presente investigação analisa e compara material publicado por dois jornais, – Folha de São Paulo, do Brasil, e Público, de Portugal -, sobre referendos realizados nos dois países, respectivamente, em 2005 e 2007. O objetivo é verificar se nesse material há falas com argumentos que possam ser considerados úteis para contribuir com um processo deliberativo, na perspectiva da democracia defendida por Jürgen Habermas. Ancorado numa sugestão de Simone Chambers, o material jornalístico é classificado como retórica plebiscitária ou retórica deliberativa. A retórica plebiscitária se caracteriza pela presença de mais elementos que não contribuem para a realização de uma deliberação pública, enquanto a deliberativa contém significativa presença de subsídios considerados importantes para o desenvolvimento desse processo. O reforço de alguns elementos no material jornalístico, – e a investigação avalia e quantifica quais elementos a mídia privilegia -, pode fazer com que se aproxime ou se distancie daquilo que é qualificado como importante para um debate público numa perspectiva habermasiana. A decisão de acionar mais um ou outro elemento está entre as opções que a mídia faz. Ao optar, ela sai de uma zona de fronteira, com várias possibilidades em aberto, e realiza um processo de demarcação. E, ao demarcar, ela estabelece limites, seja para um ou para outro processo. Considerando que a mídia tem potenciais ambivalentes, a investigação assume este pressuposto: não é possível definir a priori o papel que a mídia desempenha em eventos específicos de deliberação pública, como no caso dos referendos, isto porque em seu material comparecem todos os elementos da retórica, tanto os tendentes a favorecer como aqueles que prejudicam um processo deliberativo. Mas dada sua lógica de produção e divulgação, ela revela alguns dos seus limites que a impedem de complexificar os temas da agenda pública. E a hipótese que se assume nesta tese é que as escolhas da mídia privilegiam mais os elementos da retórica que se coadunam com a lógica da evidência, que é refratária a um processo argumentativo. Por acionar em maior número os elementos que são limitadores de um processo argumentativo, é temerário apontar a mídia como fórum central para a deliberação pública. E, se o seu poder de abrangência pode ser tomado como potencialmente útil para a realização de processos deliberativos nas democracias contemporâneas, a simples disponibilidade desse dispositivo não permite chegar à conclusão açodada de que sua prática contribua efetivamente para o desenvolvimento do debate público. Pelo seu potencial, e por permitir que em seu interior também circule material identificado como uma retórica deliberativa, até pode-se ver na mídia um ator capacitado a realizar um papel complementar, mas não central, no processo mais amplo da deliberação pública. E, nessa linha de análise, não se pode descartar por completo a possibilidade de o material produzido pela mídia ser desencadeador de um processo deliberativo na sociedade ao ser apropriado ou reinterpretado de diferentes maneiras pelos diversos atores da esfera pública.
Книги з теми "Cantor alloy"
Falchi, Gian Luigi. Introduzione allo studio delle fonti dell'utrumque ius. Città del Vaticano: Lateran University Press, 2006.
Знайти повний текст джерелаProtecting New Jersey's environment: From cancer alley to the new Garden State. New Brunswick, N.J: Rivergate Books, 2011.
Знайти повний текст джерелаBellini, Piero. Del primato del dovere: Introduzione critica allo studio dell'ordinamento generale della Chiesa cristiana cattolica. Soveria Mannelli (Catanzaro): Rubbettino, 2004.
Знайти повний текст джерелаUS GOVERNMENT. An Act to Allow Postal Patrons to Contribute to Funding for Breast Cancer Research through the Voluntary Purchase of Certain Specially Issued United States Postage Stamps, and for Other Purposes. [Washington, D.C.?: U.S. G.P.O., 1997.
Знайти повний текст джерелаFalchi, Gian Luigi. Fragmenta iuris Romani canonici: Introduzione allo studio della recezione del diritto romano nelle fonti del diritto canonico altomedievale. Roma: Pontificia Università lateranense, 1998.
Знайти повний текст джерелаMoseley, V. J. "Jon", Andreas Lampropoulos, Eftychia Apostolidi, and Christos Giarlelis. Characteristic Seismic Failures of Buildings. Edited by Stephanos E. Dritsos. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2019. http://dx.doi.org/10.2749/sed016.
Повний текст джерелаMunday, Clare. Allo Cancer, Je T'écoute. Independently Published, 2018.
Знайти повний текст джерелаBelton, Thomas. Protecting New Jersey's Environment: From Cancer Alley to the New Garden State. Rutgers University Press, 2010.
Знайти повний текст джерелаLavoué, Vincent, Patrick Legembre, Jean Levêque, Fabrice Foucher, Sébastien Henno, and Florian Cabillic. Ovarian Cancer Immunity. Oxford University Press, 2018. http://dx.doi.org/10.1093/med/9780190248208.003.0003.
Повний текст джерелаBelton, Thomas. Protecting New Jersey's Environment: From Cancer Alley to the New Garden State. Rutgers University Press, 2010.
Знайти повний текст джерелаЧастини книг з теми "Cantor alloy"
Dent, J., G. Vantrappen, and J. P. Isal. "Can Omeprazole allow healing of certain ulcerated esophagitis?" In Benign Lesions of the Esophagus and Cancer, 289–92. Berlin, Heidelberg: Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-73055-9_80.
Повний текст джерелаCascinelli, N., and M. Santinami. "Excision of Primary Melanoma Should Allow Primary Closure of the Wound." In Recent Results in Cancer Research, 317–21. Berlin, Heidelberg: Springer Berlin Heidelberg, 1995. http://dx.doi.org/10.1007/978-3-642-78771-3_24.
Повний текст джерелаCargill, G. "Doesn’t metoclopramide allow a significant decrease in antacid consumption?" In Benign Lesions of the Esophagus and Cancer, 263. Berlin, Heidelberg: Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-73055-9_70.
Повний текст джерелаKharfan-Dabaja, Mohamed A. "The Infusion Center." In The Comprehensive Cancer Center, 35–40. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-82052-7_5.
Повний текст джерелаOllyo, J. B., M. Savary, Ph Monnier, J. Wellinger, J. J. Gonvers, and F. Levi. "Do the classifications of peptic stenosis allow a definition of the risk of degeneration?" In Benign Lesions of the Esophagus and Cancer, 610–13. Berlin, Heidelberg: Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-73055-9_159.
Повний текст джерелаKe, Yuanyuan, Jing Li, and Yifu Wang. "Chemotaxis–Haptotaxis System." In Financial Mathematics and Fintech, 127–87. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-3763-7_3.
Повний текст джерелаSchemmel, Matthias, and William G. Boltz. "Lexical Appendix." In Theoretical Knowledge in the Mohist Canon, 175–91. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-08797-4_4.
Повний текст джерелаCamelo, Felipe, and Anne Le. "The Intricate Metabolism of Pancreatic Cancers." In The Heterogeneity of Cancer Metabolism, 77–88. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65768-0_5.
Повний текст джерелаSmits, Daan, and Antoine A. Khalil. "Multimodal Techniques to Study Tumor Growth, Basement Membrane Breaching, and Invasion in 3D Matrices." In Cell Migration in Three Dimensions, 281–303. New York, NY: Springer US, 2023. http://dx.doi.org/10.1007/978-1-0716-2887-4_17.
Повний текст джерелаRuiz, Blanca Iciar Indave. "Improving the WHO Classification of Tumours by an Evidence-Based Approach: A New Online/Blended Learning Training Program." In Improving Oncology Worldwide, 43–53. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-96053-7_6.
Повний текст джерелаТези доповідей конференцій з теми "Cantor alloy"
Gromov, V. E., S. V. Konovalov, Yu A. Rubannikova, and A. P. Semin. "Ways of increasing mechanical properties of cantor high entropy alloy." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE “PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY”. AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0084580.
Повний текст джерелаLi, Xuejie, Peng Zhou, Hao Feng, Huabing Li, and Kevin Ogle. "Influence of nitrogen addition and dissolved oxygen on the passivation of cantor high entropy alloy in sulfuric acid." In 1st Corrosion and Materials Degradation Web Conference. Basel, Switzerland: MDPI, 2021. http://dx.doi.org/10.3390/cmdwc2021-09893.
Повний текст джерелаFarias, Mathew, Han Hu, Shanshan Zhang, Jianzhi Li, and Ben Xu. "Molecular Dynamic Simulation of Diffusion in the Melt Pool in Laser Additive Alloying Process of Co-Ni-Cr-Mn-Fe High Entropy Alloy." In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-72075.
Повний текст джерелаWahl, Jacqueline B., and Ken Harris. "New Single Crystal Superalloys, CMSX®-8 and CMSX®-7." In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/gt2014-25155.
Повний текст джерелаWahl, Jacqueline B., and Ken Harris. "CM 939 Weldable® Alloy Update." In ASME Turbo Expo 2007: Power for Land, Sea, and Air. ASMEDC, 2007. http://dx.doi.org/10.1115/gt2007-27239.
Повний текст джерелаBaptista, Pedro V., Gonçalo Doria, and João Conde. "Alloy metal nanoparticles for multicolor cancer diagnostics." In SPIE BiOS, edited by Wolfgang J. Parak, Kenji Yamamoto, and Marek Osinski. SPIE, 2011. http://dx.doi.org/10.1117/12.879025.
Повний текст джерелаHashidate, Ryuta, Shoichi Kato, Takashi Onizawa, Takashi Wakai, and Naoto Kasahara. "Proposal of Simulation Material Test Technique for Clarifying the Structure Failure Mechanisms Under Excessive Seismic Loads." In ASME 2021 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/pvp2021-61866.
Повний текст джерелаWu, Ziying, Hongzhao Liu, Lilan Liu, Daning Yuan, and Zhongming Zhang. "Computing of Nonlinear Damping Using the Moving Autoregressive Model Method." In ASME 7th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2004. http://dx.doi.org/10.1115/esda2004-58146.
Повний текст джерелаHarris, Ken, and Jacqueline B. Wahl. "CM 939 Weldable® Alloy." In ASME Turbo Expo 2004: Power for Land, Sea, and Air. ASMEDC, 2004. http://dx.doi.org/10.1115/gt2004-53966.
Повний текст джерелаSrivastava, S. Krishna, Michael J. Newburn, John P. Cotner, and Mark A. Richeson. "Long-Term Oxidation Behavior of Selected High Temperature Alloys." In ASME Turbo Expo 2007: Power for Land, Sea, and Air. ASMEDC, 2007. http://dx.doi.org/10.1115/gt2007-28269.
Повний текст джерелаЗвіти організацій з теми "Cantor alloy"
Gray, J. H. The Characterization and Dissolution of Scrub Alloy Buttons in F-Canyon. Office of Scientific and Technical Information (OSTI), February 2001. http://dx.doi.org/10.2172/775076.
Повний текст джерелаPIERCE, RA. Dissolution of Plutonium Scrub Alloy and Anode Heel Materials in H-Canyon. Office of Scientific and Technical Information (OSTI), April 2004. http://dx.doi.org/10.2172/823029.
Повний текст джерелаBerkowitz, Jacob F., Christine M. VanZomeren, Jaybus J. Price, and Anthony M. Priestas. Incorporating Color Change Propensity into Dredged Material Management to Increase Beneficial Use Opportunities. Engineer Research and Development Center (U.S.), December 2020. http://dx.doi.org/10.21079/11681/39261.
Повний текст джерелаBorchmann, Daniel, Felix Distel, and Francesco Kriegel. Axiomatization of General Concept Inclusions from Finite Interpretations. Technische Universität Dresden, 2015. http://dx.doi.org/10.25368/2022.219.
Повний текст джерелаBates, C. Richards, Melanie Chocholek, Clive Fox, John Howe, and Neil Jones. Scottish Inshore Fisheries Integrated Data System (SIFIDS): Work package (3) final report development of a novel, automated mechanism for the collection of scallop stock data. Edited by Mark James and Hannah Ladd-Jones. Marine Alliance for Science and Technology for Scotland (MASTS), 2019. http://dx.doi.org/10.15664/10023.23449.
Повний текст джерелаKapelyushnyi, Anatolyi. TRANSFORMATION OF WORD-FORMS DURING THEIR SPONTANEOUS CREATION IN LIVE TELEVISION BROADCASTIN: ADJECTIVES ADVERBS. Ivan Franko National University of Lviv, February 2022. http://dx.doi.org/10.30970/vjo.2022.51.11409.
Повний текст джерелаManulis, Shulamit, Christine D. Smart, Isaac Barash, Guido Sessa, and Harvey C. Hoch. Molecular Interactions of Clavibacter michiganensis subsp. michiganensis with Tomato. United States Department of Agriculture, January 2011. http://dx.doi.org/10.32747/2011.7697113.bard.
Повний текст джерелаManulis-Sasson, Shulamit, Christine D. Smart, Isaac Barash, Laura Chalupowicz, Guido Sessa, and Thomas J. Burr. Clavibacter michiganensis subsp. michiganensis-tomato interactions: expression and function of virulence factors, plant defense responses and pathogen movement. United States Department of Agriculture, February 2015. http://dx.doi.org/10.32747/2015.7594405.bard.
Повний текст джерелаDeVivo, Joseph C. Inventories 2.0: A plan for the next generation of NPS natural resource inventories. National Park Service, 2019. http://dx.doi.org/10.36967/2266646.
Повний текст джерелаInvestigation on Design and Analysis of Passenger Car Body Crash-Worthiness in Frontal Impact Using Radioss. SAE International, September 2020. http://dx.doi.org/10.4271/2020-28-0498.
Повний текст джерела