Добірка наукової літератури з теми "Boxe – Simulation par ordinateur"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Boxe – Simulation par ordinateur".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Boxe – Simulation par ordinateur"
Meadeb, Jean, Gerard Chales, Patrice Burgevin, Philippe Ingels, Rene Pedrono, Jean-Michel Roger, Catherine Frangeul, Marie-Jo Pedrono, and Pierre Lenoir. "Apprentissage du diagnostic médical par simulation sur ordinateur (AEDM)." Medical Informatics 11, no. 2 (January 1986): 167–75. http://dx.doi.org/10.3109/14639238609001369.
Повний текст джерелаTap, H., R. P. Tan, O. Bernal, P.-F. Calmon, C. Rouabhi, C. Capello, J. Schauber, et al. "Du silicium au circuit CMOS. Pédagogie active par Apprentissage Par Projet." J3eA 23 (2024): 1019. http://dx.doi.org/10.1051/j3ea/20241019.
Повний текст джерелаCharness, Neil. "Psychological Models of Aging: How, Who, and What? A Comment." Canadian Journal on Aging / La Revue canadienne du vieillissement 14, no. 1 (1995): 67–73. http://dx.doi.org/10.1017/s0714980800010503.
Повний текст джерелаSerhir, N., and C. Marche. "La simulation assistée par ordinateur dans le contrôle et l'utilisation optimale des ressources hydriques." Canadian Journal of Civil Engineering 19, no. 3 (June 1, 1992): 432–40. http://dx.doi.org/10.1139/l92-052.
Повний текст джерелаCamarero, R., L. Granger, C. Marche, M. Soulié, and R. Tinawi. "L'intégration en conception assistée par ordinateur pour les projets pluridisciplinaires de génie civil." Canadian Journal of Civil Engineering 15, no. 6 (December 1, 1988): 990–1005. http://dx.doi.org/10.1139/l88-131.
Повний текст джерелаRiopel, Martin. "Riopel, M. (2005). Conception et mises à l’essai d’un environnement d’apprentissage intégrant l’expérimentation assistée par ordinateur et la simulation assistée par ordinateur. Thèse de doctorat, Université de Montréal, Montréal." Revue des sciences de l'éducation 33, no. 1 (2007): 253. http://dx.doi.org/10.7202/016197ar.
Повний текст джерелаPerez, Fabienne, and Jonathan Peterson. "10 ans de la revue @grh : une cartographie des publications en ressources humaines." @GRH N° 47, no. 2 (July 24, 2023): 23–41. http://dx.doi.org/10.3917/grh.047.0023.
Повний текст джерелаToussaint, J., T. Habtemariam, D. Oryang, and S. Wilson. "Développement d’un modèle de simulation informatique pour l’anaplasmose, notamment dans les Antilles." Revue d’élevage et de médecine vétérinaire des pays tropicaux 46, no. 1-2 (January 1, 1993): 47–48. http://dx.doi.org/10.19182/remvt.9396.
Повний текст джерелаThrasher, Craig L. "Corporate Team Training : A More Rational Organizational Development Method." Relations industrielles 27, no. 4 (April 12, 2005): 655–62. http://dx.doi.org/10.7202/028331ar.
Повний текст джерелаHernández-Alfaro, Federico. "Syndrome d’hyperdivergence faciale." L'Orthodontie Française 87, no. 4 (December 2016): 479–89. http://dx.doi.org/10.1051/orthodfr/2016037.
Повний текст джерелаДисертації з теми "Boxe – Simulation par ordinateur"
Younes, Mohamed. "Apprentissage et stimulation des stratégies de sport (boxe) pour l'entraînement en réalité virtuelle." Electronic Thesis or Diss., Université de Rennes (2023-....), 2024. http://www.theses.fr/2024URENS014.
Повний текст джерелаThis thesis investigates the extraction and simulation of fighter interactions, mainly for boxing, by utilizing deep learning techniques: human motion estimation from videos, reinforcement learning-based imitation learning, and physics-based character simulation. In the context of sport analysis from videos, a benchmark protocol is proposed where various contemporary 2D human pose extraction methods are evaluated for their precision in deriving positional information from RGB video recordings of boxers during complex movements and unfavorable filming circumstances. In a second part, the thesis focuses on replicating realistic fighter interactions given motion and interaction data through an innovative methodology for imitating interactions and motions among multiple physically simulated characters derived from unorganized motion capture data. Initially, this technique was demonstrated for simulating light shadow-boxing between two fighters without significant physical contact. Subsequently, it was expanded to accommodate additional interaction data featuring boxing with actual physical contact and other combat activities, along with handling user instructions and interaction restrictions
Fritsch, Andreas. "Multiscale explanation of elasticity and strength of bone and bone replacement materials made of hydroxyapatite, glass-ceramics, or titanium : a continuum micromechanics approach=mehrskalige erklärung der elastizit ät und festigkeit von knochen und knochenersatzmaterialien aus hydroxyapatit, glas-keramik oder titanium: ein kontinuumsmikromechanischer ansatz." Paris Est, 2009. http://pastel.archives-ouvertes.fr/docs/00/50/13/47/PDF/These_Fritsch_anglais.pdf.
Повний текст джерелаBone is a hierarchically organized material, characterized by an astonishing variability and diversity. Bone replacement or biomaterials are critical components in artificial organs, and they are also used as scaffolds in tissue engineering. The aim of this thesis is the prediction of the strength of bone and bone replacement materials, from their composition and microstructure, by means of multiscale models. The theoretical developments are supported by comprehensive experiments on cortical bone and on biomaterials made of hydroxyapatite, glass-ceramic, and titanium
Nicolle, Cyril. "Mise en forme de poudres de bore par compression isostatique à chaud : détermination des propriétés rhéologiques et simulation numérique du procédé." Dijon, 1999. http://www.theses.fr/1999DIJOS058.
Повний текст джерелаPelletier, Bertrand. "Modélisation et simulation numérique de l'exo-diffusion du bore dans les oxydes encapsulés des technologies CMOS déca-nanométriques." Electronic Thesis or Diss., Aix-Marseille 1, 2011. http://www.theses.fr/2011AIX10060.
Повний текст джерелаThis study has focused on the interaction of dielectric stacks nitride/oxide with the boron distribution in the source and drain areas after the activation annealing. The low temperature deposition processes of nitride and oxide layers limit the impact of these deposition steps on the electrical performance of the device. However the thermal budgets of lower deposit also induce a higher concentration of hydrogen. This hydrogen accumulation in the dielectric layer in contact with the source and drain regions increases the boron diffusion into the silicon oxide and causing modification of the boron distribution into the implanted zones and therefore an electrical performance modification of the device. In this work we developed a physical model combining the hydrogen exchange during annealing between the dielectric layers and boron out-diffusion between the substrate and silicon oxide. This model was validated firstly by simulating the profiles of boron after annealing for different deposition conditions nitride and oxide, and also by coupling measurements of mechanical stress with hydrogen thermal desorption spectroscopy (TDS). This research revealed two mechanisms of hydrogen regulation in oxide layer during annealing. First, the role of nitride encapsulation, hydrogen diffusion in nitride layer is lower than in oxide so hydrogen cannot degas out during anneal. The second is the role of nitride as a hydrogen source into the stack
Afnouch, Marwa. "Machine Learning Applications in Medical Diagnosis, case study : bone metastasis." Electronic Thesis or Diss., Valenciennes, Université Polytechnique Hauts-de-France, 2023. http://www.theses.fr/2023UPHF0039.
Повний текст джерелаMetastases are a group of abnormal cells that develop outside the original organ bound aries and spread to other organs. In particular, bone metastases originate in one organ of the body, such as the breast, lung, or prostate, and spread to the bone. Although this disease was discovered more than a century ago, it is still not well defined, and exist ing treatments are weakly effective, possibly because it is difficult and time-consuming to detect. To help physicians, new machine learning technologies promise to improve overall accuracy. This dissertation aims to help radiologists routinely detect bone metas tases using machine learning algorithms. The discovery of methodological biases in studies of bone metastasis diagnosis and the lack of consensus on the interpretability of machine learning have shifted the focus of this dissertation. It now focuses primarily on data collection and overcoming the challenges of validation and interpretability of machine learning. In order to properly assess the ability of machine learning to detect bone metastases, three experimental studies were conducted. The first proposing a novel segmentation approach supported by an attention mechanism to localize bone lesions. The second is a study of machine learning methods for identifying bone metastases cases. Finally, the last study highlights the lack of robustness of classification using machine learning methods and proposes a method to improve accuracy based on both CNN and Transformer approaches. The experimental results of this dissertation are evaluated on our introduced BM-Seg dataset, which is the first benchmark dataset for bone metasta sis segmentation and classification using CT-scans. This novel open-source dataset was used to improve the reproducibility of machine learning experiments. The results of the various preliminary studies are encouraging and promising
Normand, Stéphane. "Conception, réalisation et caractérisation d'un dispositif de détection neutronique basé sur l'utilisation de scintillateurs plastiques dopés au Bore." Phd thesis, Université de Caen, 2001. http://tel.archives-ouvertes.fr/tel-00396150.
Повний текст джерелаDans une première partie, le processus de fabrication et la méthode de dopage en éléments borés sont présentés de façon détaillée. Différentes analyses physico-chimiques (I.R., UV-vis et RMN) ont été utilisées pour caractériser le matériau obtenu et pour confirmer sa composition et sa structure. De plus, une série d'expériences sous rayonnements alpha et sous faisceaux de protons a permis de mesurer les caractéristiques de scintillation. L'émission lumineuse peut ainsi être déterminée grâce à la relation semi-empirique de Birks.
Une seconde partie rend compte de la modélisation complète de l'ensemble du détecteur : interaction rayonnement - matière, émission et parcours de la lumière, formation du signal. Le code de calcul MCNP (Monte Carlo N-Particles) a été couplé à un code de génération et de propagation de lumière développé au cours de ce travail. Ces moyens de simulation ont permis d'optimiser les dimensions du détecteur pour la détection neutronique et de cerner l'influence de la géométrie sur la collecte des photons de scintillation. L'efficacité de détection et la durée de vie des neutrons dans ce type de détecteurs ont été estimées. Les mesures confirment la validité des simulations.
Une troisième partie fait état des méthodes de discrimination neutron - gamma analogique (méthode du passage par zéro) et numérique (méthode de la comparaison de charges) mises en œuvre pour ce scintillateur. Leurs performances respectives sont comparées et discutées.
La dernière partie concerne les applications qui peuvent bénéficier de l'utilisation de scintillateurs plastiques dopés au Bore, comme les fibres scintillantes dopées, la spectrométrie neutronique ou encore les systèmes de mesures des multiplicités neutroniques.
Barkad, Hassan Ali. "Conception et réalisation de photodétecteurs X-UV à base de matériaux à large bande interdite destinés à des applications spatiales." Thesis, Lille 1, 2009. http://www.theses.fr/2009LIL10095/document.
Повний текст джерелаCurrently, ultraviolet photodetectors based on silicon have shown limitations inherent to their technology in spite of their continual improvement for these last years. In collaboration with the Royal Observatory of Belgium within the LYRA (and BOLD) project, the maturity of the semiconductors with wide band gap is shown for specific applications in the space field and high-energy physics. The availability of these new materials makes it possible to exceed existing technologies. These materials present robustness, a radiation hardness and their wide band gap provide insensibility to visible and infrared lights. Indeed, because of their exceptional physical and chemical properties, diamond for example, is one of the ideal candidates from the point of view of fundamental research and technological applications. Furthermore, new nitrides semiconductors with wide band gap (AlN, BN) are now elaborated successfully and present remarkable properties such as diamond.The goal of this work was to design and to fabricate new UV photodetectors based on these materials. This work begins with determination of the transport properties of these semiconductors materials versus temperature by Monte Carlo simulation in order to optimize the performances of the photodetectors by means of a finite elements software based on COMSOL® by taking into account the material type, the geometry of the structure, the technological design, the nature of the electrodes (size, ohmic contacts, Schottky contacts, symmetry…) as well as incidental radiations. A physical-thermal coupling is implemented in some cases to determine the impact of thermal effects in device working behaviour. Various UV detectors are elaborated in clean room and characterized under X-EUV radiation on the one hand and DUV-UV on the other hand. The characteristics (stability, reliability, sensitivity to the radiations UV, dark current…) and the obtained performances are then described for each studied material. This work made it possible to establish several state of the art performances on diamond, AlN and BN and contributed to the development of the first solar EUV radiometer LYRA onboard PROBA2 satellite
Leblond, Sylvain. "Structure des isotopes de bore et de carbone riches en neutrons aux limites de la stabilité." Caen, 2015. http://www.theses.fr/2015CAEN2058.
Повний текст джерелаThe unbound nuclei 18B and 21C have been studied in an experiment undertaken at the RIBF-RIKEN using the recently commissioned SAMUARI spectrometer and NEBULA neutron array. The two systems were probed using single-neutron and single and two-proton knockout from secondary beams of 22C, 22N, et 23O respectively in the case of 21C and 19B, 19C and 20N for 18B. The invariant mass spectra were reconstructed from the momentum of the fragment (17B, 20C) and neutron. In order to interpret the results a complete simulation of the experimental setup was utilised. The analysis procedures as well as the calibrations were verified through a measurement of the well-known ground state of 16B. In the case of 18B three states were observed: an s-wave virtual state (as < -50 fm), an l=2 resonance at Er =0. 77 +- 0. 09 MeV and an l=0 resonance at Er = 1. 6 +- 0. 6 MeV. These results suggest that the low-lying level structure of 18B is governed by a competition between the neutron 2s1/2 and 1d5/2 configurations. In the case of 21C resonances were observed at Er = 0. 8 +- 0. 15 MeV (l = 0) and Er = 1. 5 +-0. 1 MeV (l=2), a result which confirms predictions of an inversion of the 5/2+ and 1/2+ levels. Finally an analysis of the momentum distributions for 18B and 21C produced in single-neutron knockout was carried out. The results indicate that the valence neutrons 19B and 22C are in mixed (2s1/2)2 and (1d5/2)2 configurations
Pelletier, Bertrand. "Modélisation et simulation numérique de l'exo-diffusion du bore dans les oxydes encapsulés des technologies CMOS déca-nanométriques." Thesis, Aix-Marseille 1, 2011. http://www.theses.fr/2011AIX10060/document.
Повний текст джерелаThis study has focused on the interaction of dielectric stacks nitride/oxide with the boron distribution in the source and drain areas after the activation annealing. The low temperature deposition processes of nitride and oxide layers limit the impact of these deposition steps on the electrical performance of the device. However the thermal budgets of lower deposit also induce a higher concentration of hydrogen. This hydrogen accumulation in the dielectric layer in contact with the source and drain regions increases the boron diffusion into the silicon oxide and causing modification of the boron distribution into the implanted zones and therefore an electrical performance modification of the device. In this work we developed a physical model combining the hydrogen exchange during annealing between the dielectric layers and boron out-diffusion between the substrate and silicon oxide. This model was validated firstly by simulating the profiles of boron after annealing for different deposition conditions nitride and oxide, and also by coupling measurements of mechanical stress with hydrogen thermal desorption spectroscopy (TDS). This research revealed two mechanisms of hydrogen regulation in oxide layer during annealing. First, the role of nitride encapsulation, hydrogen diffusion in nitride layer is lower than in oxide so hydrogen cannot degas out during anneal. The second is the role of nitride as a hydrogen source into the stack
Tran, Van Truong. "Propriétés électroniques et thermoélectriques des hétérostructures planaires de graphène et de nitrure de bore." Thesis, Université Paris-Saclay (ComUE), 2015. http://www.theses.fr/2015SACLS133/document.
Повний текст джерелаGraphene is a fascinating 2-dimensional material exhibiting outstanding electronic, thermal and mechanical properties. Is this expected to have a huge potential for a wide range of applications, in particular in electronics. However, this material also suffers from a strong drawback for most electronic devices due to the gapless character of its band structure, which makes it difficult to switch off the current. For thermoelectric applications, the high thermal conductance of this material is also a strong limitation. Hence, many challenges have to be taken up to make it useful for actual applications. This thesis work focuses on the theoretical investigation of a new strategy to modulate and control the properties of graphene that consists in assembling in-plane heterostructures of graphene and Boron Nitride (BN). It allows us to tune on a wide range the bandgap, the thermal conductance and the Seebeck coefficient of the resulting hybrid nanomaterial. The work is performed using atomistic simulations based on tight binding (TB), force constant (FC) models for electrons and phonons, respectively, coupled with the Green's function formalism for transport calculation. The results show that thanks to the tunable bandgap, it is possible to design graphene/BN based transistors exhibiting high on/off current ratio in the range 10⁴-10⁵. We also predict the existence hybrid quantum states at the zigzag interface between graphene and BN with appealing electron transport. Finally this work shows that by designing properly a graphene ribbon decorated with BN nanoflakes, the phonon conductance is strongly reduced while the bandgap opening leads to significant enhancement of Seebeck coefficient. It results in a thermoelectric figure of merit ZT larger than one at room temperature
Книги з теми "Boxe – Simulation par ordinateur"
Trigeassou, J. Cl. Recherche de modèles expérimentaux assistée par ordinateur. Toulouse: Langage et informatique, 1988.
Знайти повний текст джерела1934-, Zobrist George W., and Leonard James V, eds. Simulation systems. Amsterdam: Gordon & Breach, 2000.
Знайти повний текст джерелаChevrier, Jacques. L' ordinateur, outil d'apprentissage. Hull, Qué: Université du Québec à Hull, 1985.
Знайти повний текст джерелаRiopel, Martin. Conception et mises à l'essai d'un environnement d'apprentissage intégrant l'expérimentation assistée par ordinateur et la simulation assistée par ordinateur. [Repentigny, QC]: Martin Riopel, 2005.
Знайти повний текст джерелаNeelamkavil, Francis. Computer simulation and modelling. Chichester [Sussex, England]: Wiley, 1987.
Знайти повний текст джерелаTreuil, Jean-Pierre. Modélisation et simulation à base d'agents: Exemples commentés, outils informatiques et questions théoriques. Paris: Dunod, 2008.
Знайти повний текст джерелаLapresté, Jean-Thieerry. Aide-mémoire MATLAB. Paris: Ellipses, 2002.
Знайти повний текст джерелаA, Kheir Naim, ed. Systems modeling and computer simulation. 2nd ed. New York: M. Dekker, 1996.
Знайти повний текст джерелаSavić, Dragoljub. BASIC technical systems simulation. London: Butterworths, 1989.
Знайти повний текст джерелаArifon, Olivier. L'utilisation des procédures de l'ethnométhodologie dans l'élaboration de jeux de simulation assistés par ordinateur. Lille: A.N.R.T, Université de Lille III, 1997.
Знайти повний текст джерелаТези доповідей конференцій з теми "Boxe – Simulation par ordinateur"
Elmoutawakkil, N., S. Bouzoubaa, S. Bellemkhannate, and I. Benyahya. "Flux de travail du guidage tridimensionnel en chirurgie orale." In 66ème Congrès de la SFCO. Les Ulis, France: EDP Sciences, 2020. http://dx.doi.org/10.1051/sfco/20206602005.
Повний текст джерела