Добірка наукової літератури з теми "Bioinks or Additive manufacturing"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Bioinks or Additive manufacturing".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Bioinks or Additive manufacturing"
Zhang, Chun-Yang, Chao-Ping Fu, Xiong-Ya Li, Xiao-Chang Lu, Long-Ge Hu, Ranjith Kumar Kankala, Shi-Bin Wang, and Ai-Zheng Chen. "Three-Dimensional Bioprinting of Decellularized Extracellular Matrix-Based Bioinks for Tissue Engineering." Molecules 27, no. 11 (May 26, 2022): 3442. http://dx.doi.org/10.3390/molecules27113442.
Повний текст джерелаTheus, Andrea S., Liqun Ning, Boeun Hwang, Carmen Gil, Shuai Chen, Allison Wombwell, Riya Mehta, and Vahid Serpooshan. "Bioprintability: Physiomechanical and Biological Requirements of Materials for 3D Bioprinting Processes." Polymers 12, no. 10 (October 1, 2020): 2262. http://dx.doi.org/10.3390/polym12102262.
Повний текст джерелаJose, Rod R., Maria J. Rodriguez, Thomas A. Dixon, Fiorenzo Omenetto, and David L. Kaplan. "Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting." ACS Biomaterials Science & Engineering 2, no. 10 (April 7, 2016): 1662–78. http://dx.doi.org/10.1021/acsbiomaterials.6b00088.
Повний текст джерелаAhangar, Pouyan, Megan E. Cooke, Michael H. Weber, and Derek H. Rosenzweig. "Current Biomedical Applications of 3D Printing and Additive Manufacturing." Applied Sciences 9, no. 8 (April 25, 2019): 1713. http://dx.doi.org/10.3390/app9081713.
Повний текст джерелаTemirel, Mikail, Sajjad Rahmani Dabbagh, and Savas Tasoglu. "Shape Fidelity Evaluation of Alginate-Based Hydrogels through Extrusion-Based Bioprinting." Journal of Functional Biomaterials 13, no. 4 (November 7, 2022): 225. http://dx.doi.org/10.3390/jfb13040225.
Повний текст джерелаOjeda, Edilberto, África García-Barrientos, Nagore Martínez de Cestafe, José María Alonso, Raúl Pérez-González, and Virginia Sáez-Martínez. "Nanometric Hydroxyapatite Particles as Active Ingredient for Bioinks: A Review." Macromol 2, no. 1 (January 4, 2022): 20–29. http://dx.doi.org/10.3390/macromol2010002.
Повний текст джерелаSzychlinska, Marta Anna, Fabio Bucchieri, Alberto Fucarino, Alfredo Ronca, and Ugo D’Amora. "Three-Dimensional Bioprinting for Cartilage Tissue Engineering: Insights into Naturally-Derived Bioinks from Land and Marine Sources." Journal of Functional Biomaterials 13, no. 3 (August 12, 2022): 118. http://dx.doi.org/10.3390/jfb13030118.
Повний текст джерелаRameshwar, Pranela, Vibha Harindra Savanur, Jean-Pierre Etchegaray, and Murat Guvendiren. "3D bioprinting as a designer organoid to assess pathological processes in translational medicine." Journal of 3D Printing in Medicine 6, no. 1 (March 2022): 37–46. http://dx.doi.org/10.2217/3dp-2021-0006.
Повний текст джерелаYang, Haowei, Kai-Hung Yang, Roger J. Narayan, and Shaohua Ma. "Laser-based bioprinting for multilayer cell patterning in tissue engineering and cancer research." Essays in Biochemistry 65, no. 3 (August 2021): 409–16. http://dx.doi.org/10.1042/ebc20200093.
Повний текст джерелаAlbrecht, Franziska B., Freia F. Schmidt, Ann-Cathrin Volz, and Petra J. Kluger. "Bioprinting of 3D Adipose Tissue Models Using a GelMA-Bioink with Human Mature Adipocytes or Human Adipose-Derived Stem Cells." Gels 8, no. 10 (September 25, 2022): 611. http://dx.doi.org/10.3390/gels8100611.
Повний текст джерелаДисертації з теми "Bioinks or Additive manufacturing"
Minck, Justin Stewart. "DEVELOPING A LOW COST BIOLOGICAL ADDITIVE MANUFACTURING SYSTEM FOR FABRICATING GEL EMBEDDED CELLULAR CONSTRUCTS." CSUSB ScholarWorks, 2019. https://scholarworks.lib.csusb.edu/etd/844.
Повний текст джерелаHintz, Madeline L. "Optimising breast implant geometry using 3-dimensional imaging." Thesis, Queensland University of Technology, 2017. https://eprints.qut.edu.au/115013/1/115013_7535198_madeline_hintz_thesis.pdf.
Повний текст джерелаKeil, Heinz Simon. "Quo vadis "Additive Manufacturing"." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-214719.
Повний текст джерелаLeirvåg, Roar Nelissen. "Additive Manufacturing for Large Products." Thesis, Norges Teknisk-Naturvitenskaplige Universitet, 2013. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-20870.
Повний текст джерелаJun, Sung Yun. "Additive manufacturing for antenna applications." Thesis, University of Kent, 2018. https://kar.kent.ac.uk/68833/.
Повний текст джерелаRanjan, Rajit. "Design for Manufacturing and Topology Optimization in Additive Manufacturing." University of Cincinnati / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1439307951.
Повний текст джерелаLebherz, Matthias, and Jonathan Hartmann. "Commercializing Additive Manufacturing Technologies : A Business Model Innovation approach to shift from Traditional to Additive Manufacturing." Thesis, Högskolan i Halmstad, Akademin för ekonomi, teknik och naturvetenskap, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-36132.
Повний текст джерелаKhan, Imran. "Electrically conductive nanocomposites for additive manufacturing." Doctoral thesis, Universitat Autònoma de Barcelona, 2020. http://hdl.handle.net/10803/670587.
Повний текст джерелаLa fabricación aditiva (AM) es un proceso de fabricación de capas sucesivas de material para construir un objeto sólido tridimensional a partir de un modelo digital, a diferencia de las metodologías de fabricación sustractiva. AM ofrece la libertad de diseñar e innovar un producto para que se puedan obtener y revisar piezas complejas si es necesario, en un tiempo reducido en comparación con las tecnologías de fabricación tradicionales. En términos de su utilización total y generalizada, la tecnología tiene aplicaciones limitadas. Por motivos similares, la nanotecnología se considera la fuerza impulsora detrás de una nueva revolución industrial. Tiene la capacidad de incorporar funcionalidades específicas, que se producen debido a la escala nanométrica, a las partes deseadas para dispositivos funcionales como electrodos para dispositivos de almacenamiento de energía. La tesis se centra en el uso de nanocompuestos conductores de electricidad en la fabricación aditiva. En este escenario, dos tipos de nanocompuestos están preparados para usar como materia prima para la impresión de nanocompuestos conductores de electricidad que emplean dos tipos diferentes de material matricial; (1) un polímero termoplástico y (2) una resina termoestable. Los nanotubos de carbono se usaron como partículas de nanoestructura eléctricamente conductoras. Estas nanoestructuras forman redes complejas en una matriz polimérica de manera que el material de la matriz se transforma de un material aislante en un material eléctricamente conductor. La policaprolactona es un polímero semicristalino y se considera un material matriz adecuado entre la clase de polímeros termoplásticos, ya que ofrece excelentes características reológicas, de flujo y elásticas. Los hilos se imprimieron usando una extrusora biológica y se midió la conductividad eléctrica en estos hilos bajo el efecto de la deformación uniaxial. La microestructura cambia bajo el efecto de una deformación uniaxial que conduce a alterar la orientación de los nanotubos de carbono en la matriz de policaprolactona. Como consecuencia de la realineación de los nanotubos, las vías conductoras interrumpen u organizan, lo que puede aumentar o disminuir la conductividad eléctrica en los nanocompuestos. Las radiaciones de sincrotrón se utilizan para sondear tales cambios en la microestructura. Se prepararon diferentes composiciones usando nanotubos de carbono y las muestras impresas se estudiaron en términos de conductividad eléctrica y microestructura usando radiaciones sincrotrónicas. Basado en el análisis, se propone un modelo que puede predecir la conductividad eléctrica bajo el efecto de la deformación uniaxial. En términos de polímeros termoestables, se introduce un sistema simple para la impresión de nanocompuestos termoestables a base de polímeros. El detalle completo del sistema de impresión y la tinta de nanocompuestos se proporciona en uno de los capítulos. La tinta de nanocompuesto a base de epoxi se preparó para contener nanotubos de carbono como partículas de relleno con una pequeña porción de polímero termoplástico, policaprolactona. Las muestras impresas están sujetas al sesgo externo que indica que son eléctricamente conductoras. Se prepararon diferentes composiciones usando resina epoxi de glicidil bisfenol-A, trietilentetramina, policaprolactona, nanotubos de carbono y se resaltan los problemas para adquirir la calidad de impresión adecuada. Las muestras impresas se estudiaron en términos de conductividad eléctrica, estudiando la conductividad eléctrica de corriente alterna y continua. El sistema de materiales se explora en términos del nivel de reticulación, estructura y morfología y comportamiento térmico. Se presenta un modelo para los nanocompuestos utilizando datos de impedancia obtenidos mediante espectroscopía dieléctrica de banda ancha. La impresora se utilizará en el futuro para imprimir dispositivos funcionales a pequeña escala, incluidos dispositivos de almacenamiento de energía.
Additive manufacturing is a process of making successive layers of material to build a three-dimensional solid object from a digital model, as opposed to subtractive manufacturing methodologies. This technology offers the freedom to design and innovation of a product so that complex parts can be obtained and revise if needed, within a small time as compared to traditional manufacturing technologies. In terms of its full utilization and widespread, the technology has limited applications. On similar grounds, nanotechnology is considered as the driving force behind a new industrial revolution. It has the ability to incorporate specific functionalities, occur due to the nanometric scale, to desired parts that offer freedom to design functional devices like electrodes for energy storage devices. The thesis is focusing on the use of electrically conductive nanocomposites into additive manufacturing. In this scenario, two types of nanocomposites are prepared to use as raw material for printing of electrically conductive nanocomposites employing two different types of matrix material; (1) a thermoplastic polymer and (2) a thermoset resin. Carbon nanotubes were used as electrically conductive nanostructure particles. These nanostructures form complex networks into a polymer matrix such that the matrix material transforms from an insulative material into an electrically conductive material. Polycaprolactone is a semicrystalline polymer and it is considered suitable matrix material amongst the class of thermoplastic polymers as it offers excellent rheological, flow and the elastic characteristics. Strands were printed using a bio extruder and electrical conductivity was measured in these strands under the effect of uniaxial deformation. The microstructure changes under the effect of uniaxial deformation leading to alter the orientation of carbon nanotubes in the polycaprolactone matrix. As a consequence of realignment of nanotubes, conductive pathways either disrupt or organize which can increase or decrease an electrical conductivity in the nanocomposites. Synchrotron radiations are used to probe such changes in the microstructure. Two different compositions were prepared using carbon nanotubes and the printed samples are studied in terms of electrical conductivity and microstructure using synchrotron radiations. Based on the analysis, a model is proposed that can predict the orientation of carbon nanotubes under the effect of uniaxial deformation. In terms of thermoset polymers, a simple system is introduced for the printing of thermoset polymer (epoxy) based nanocomposites. Complete detail of the printing system is provided in one of the chapters. Epoxy-based nanocomposite ink was prepared to contain carbon nanotubes as filler particles with a small portion of thermoplastic polymer, polycaprolactone. The printed samples are subject to the external bias which indicate that these are electrically conductive. A complete methodology was provided for the preparation of nanocomposite ink. Different compositions were prepared using glycidyl bisphenol-A epoxy resin, triethylenetetramine, polycaprolactone, carbon nanotubes and issues are highlighted to acquire appropriate print quality. The printed samples were studied in terms of electrical conductivity studying alternating and direct current electrical conductivity. The material system is explored in terms of the level of crosslinking, structure and morphology and thermal behaviour. A model is presented for the nanocomposites using impedance data obtained through broadband dielectric spectroscopy. The printer will be used in future to print small scale functional devices including energy storage devices e.g. solid-state batteries, supercapacitors and electrode plates for such kind of devices.
Universitat Autònoma de Barcelona. Programa de Doctorat en Ciència de Materials
Nopparat, Nanond, and Babak Kianian. "Resource Consumption of Additive Manufacturing Technology." Thesis, Blekinge Tekniska Högskola, Sektionen för ingenjörsvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-3919.
Повний текст джерелаMcLearen, Luke J. "Additive manufacturing in the Marine Corps." Thesis, Monterey, California: Naval Postgraduate School, 2015. http://hdl.handle.net/10945/45903.
Повний текст джерелаAs the Marine Corps continues to conduct small-unit distributed operations, the strain on its logistics intensifies. The Marine Corps must search for a solution to increase the efficiency and responsiveness of its logistics. One solution is using additive manufacturing, commonly referred to as 3D printing. This thesis answers the question of how additive manufacturing can improve the effectiveness of Marine Corps logistics. In order to answer the question, beneficial process(es), application(s), and level of integration are determined through a comparative analysis of current and future 3D-printing processes, examination of several civilian and military examples, and examination of the impact across current doctrine, organization, training, material, leadership, personnel, and facilities. Several issues should be addressed prior to the Marine Corps fully integrating 3D printers, such as the lack of certification and qualification standards, unreliable end product results, and determining ownership of intellectual property. When these issues are properly mitigated, the Marine Corps should procure printers for the purpose of manufacturing repair parts, tools, and other support aids. Marine Expeditionary Units should be the first units to receive the printers. If the printers are integrated properly, they could assist logisticians in supporting Marines conducting distributed operations throughout the battlefield.
Книги з теми "Bioinks or Additive manufacturing"
Killi, Steinar, ed. Additive Manufacturing. 6000 Broken Sound Parkway NW, Suite 300 Boca Raton, FL 33487-2742: CRC Press, 2017. http://dx.doi.org/10.1201/9781315196589.
Повний текст джерелаSrivastava, Manu, Sandeep Rathee, Sachin Maheshwari, and T. K. Kundra. Additive Manufacturing. Boca Raton, FL : CRC Press/Taylor & Francis Group, 2019.: CRC Press, 2019. http://dx.doi.org/10.1201/9781351049382.
Повний текст джерелаZhou, Kun, ed. Additive Manufacturing. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-04721-3.
Повний текст джерелаPandey, Pulak Mohan, Nishant K. Singh, and Yashvir Singh. Additive Manufacturing. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003258391.
Повний текст джерелаUnderstanding additive manufacturing. Cincinnati, Ohio: Hanser Publications, 2011.
Знайти повний текст джерелаGebhardt, Andreas. Understanding Additive Manufacturing. München: Carl Hanser Verlag GmbH & Co. KG, 2011. http://dx.doi.org/10.3139/9783446431621.
Повний текст джерелаKumar, Sanjay. Additive Manufacturing Solutions. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-80783-2.
Повний текст джерелаMorar, Dominik. Additive Manufacturing (AM). Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-37153-1.
Повний текст джерелаKumar, Sanjay. Additive Manufacturing Classification. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-14220-8.
Повний текст джерелаGibson, Ian, David Rosen, Brent Stucker, and Mahyar Khorasani. Additive Manufacturing Technologies. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-56127-7.
Повний текст джерелаЧастини книг з теми "Bioinks or Additive manufacturing"
Nulty, Jessica, Rossana Schipani, Ross Burdis, and Daniel J. Kelly. "Bioinks and Their Applications in Tissue Engineering." In Polymer-Based Additive Manufacturing, 187–218. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-24532-0_9.
Повний текст джерелаGebhardt, Andreas. "Direct Manufacturing – Rapid Manufacturing." In Additive Fertigungsverfahren, 457–526. München: Carl Hanser Verlag GmbH & Co. KG, 2016. http://dx.doi.org/10.3139/9783446445390.006.
Повний текст джерелаGebhardt, Andreas, and Jan-Steffen Hötter. "Direct Manufacturing: Rapid Manufacturing." In Additive Manufacturing, 395–450. München: Carl Hanser Verlag GmbH & Co. KG, 2016. http://dx.doi.org/10.3139/9781569905838.006.
Повний текст джерелаHerrera Ramirez, Jose Martin, Raul Perez Bustamante, Cesar Augusto Isaza Merino, and Ana Maria Arizmendi Morquecho. "Additive Manufacturing." In Unconventional Techniques for the Production of Light Alloys and Composites, 89–102. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-48122-3_6.
Повний текст джерелаRietzel, Dominik, Martin Friedrich, and Tim A. Osswald. "Additive Manufacturing." In Understanding Polymer Processing, 147–69. München: Carl Hanser Verlag GmbH & Co. KG, 2017. http://dx.doi.org/10.3139/9781569906484.007.
Повний текст джерелаde Witte, Dennis. "Additive Manufacturing." In Clay Printing, 53–81. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-37161-6_5.
Повний текст джерелаByskov, Jeppe, and Nikolaj Vedel-Smith. "Additive Manufacturing." In The Future of Smart Production for SMEs, 357–62. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-15428-7_32.
Повний текст джерелаAgarwal, Raj, Shrutika Sharma, Vishal Gupta, Jaskaran Singh, and Kanwaljit Singh Khas. "Additive manufacturing." In Additive Manufacturing, 77–97. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003258391-5.
Повний текст джерелаDev, Saty, Rajeev Srivastava, Pushpendra Yadav, and Surya Prakash. "Additive Manufacturing." In Sustainability, Innovation and Procurement, 27–59. Boca Raton, FL : CRC Press/Taylor & Francis, 2020. |: CRC Press, 2019. http://dx.doi.org/10.1201/9780429430695-2.
Повний текст джерелаGebhardt, Andreas, and Jan-Steffen Hötter. "Basics, Definitions, and Application Levels." In Additive Manufacturing, 1–19. München: Carl Hanser Verlag GmbH & Co. KG, 2016. http://dx.doi.org/10.3139/9781569905838.001.
Повний текст джерелаТези доповідей конференцій з теми "Bioinks or Additive manufacturing"
Wu, Dazhong, Changxue Xu, and Srikumar Krishnamoorthy. "Predictive Modeling of Droplet Velocity and Size in Inkjet-Based Bioprinting." In ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6513.
Повний текст джерелаKryou, Christina, Panos Karakaidos, Symeon Papazoglou, Apostolos Klinakis, and Ioanna Zergioti. "Laser bioprinting and laser photo-crosslinking of cell-laden bioinks." In Laser 3D Manufacturing IX, edited by Henry Helvajian, Bo Gu, and Hongqiang Chen. SPIE, 2022. http://dx.doi.org/10.1117/12.2607113.
Повний текст джерелаChansoria, Parth, and Rohan Shirwaiker. "Ultrasonically-Induced Patterning of Viable Cells in Viscous Bioinks During 3D Biofabrication." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2816.
Повний текст джерелаWakimoto, Tomomasa, Ryoma Takamori, Soya Eguchi, and Hiroya Tanaka. "Growable Robot with 'Additive-Additive-Manufacturing'." In CHI '18: CHI Conference on Human Factors in Computing Systems. New York, NY, USA: ACM, 2018. http://dx.doi.org/10.1145/3170427.3188449.
Повний текст джерелаJerpseth, Laura, Ketan Thakare, Zhijian Pei, and Hongmin Qin. "Experimental Investigation of Effects of Extrusion Pressure on Cell Growth of Bioprinted Algae Cells in Green Bioprinting." In ASME 2020 15th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/msec2020-8481.
Повний текст джерелаCleary, William, Clinton Armstrong, David Huegel, and Thomas Pomorski. "Additive Manufacturing at Westinghouse." In 2021 28th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/icone28-68543.
Повний текст джерелаJordan, S., and M. DeBruin. "Additive Manufacturing Evaporative Casting." In MS&T17. MS&T17, 2017. http://dx.doi.org/10.7449/2017/mst_2017_281_288.
Повний текст джерелаJordan, S., and M. DeBruin. "Additive Manufacturing Evaporative Casting." In MS&T17. MS&T17, 2017. http://dx.doi.org/10.7449/2017mst/2017/mst_2017_281_288.
Повний текст джерелаChoi, J., C. Johnson, and C. Pringle. "Freeform Additive Manufacturing Lab." In MS&T19. TMS, 2019. http://dx.doi.org/10.7449/2019mst/2019/mst_2019_246_253.
Повний текст джерела"Embedded Tutorial: Additive Manufacturing." In 2020 36th Semiconductor Thermal Measurement, Modeling & Management Symposium (SEMI-THERM). IEEE, 2020. http://dx.doi.org/10.23919/semi-therm50369.2020.9142856.
Повний текст джерелаЗвіти організацій з теми "Bioinks or Additive manufacturing"
Schraad, Mark William, and Marianne M. Francois. ASC Additive Manufacturing. Office of Scientific and Technical Information (OSTI), June 2015. http://dx.doi.org/10.2172/1186037.
Повний текст джерелаCrain, Zoe, and Roberta Ann Beal. Additive Manufacturing Overview. Office of Scientific and Technical Information (OSTI), June 2018. http://dx.doi.org/10.2172/1441284.
Повний текст джерелаMurph, S. NANO-ADDITIVE MANUFACTURING. Office of Scientific and Technical Information (OSTI), October 2019. http://dx.doi.org/10.2172/1572880.
Повний текст джерелаKorinko, P., A. Duncan, A. D'Entremont, P. Lam, E. Kriikku, J. Bobbitt, W. Housley, M. Folsom, and (USC), A. WIRE ARC ADDITIVE MANUFACTURING. Office of Scientific and Technical Information (OSTI), September 2018. http://dx.doi.org/10.2172/1475286.
Повний текст джерелаPeterson, Dominic S. Additive Manufacturing for Ceramics. Office of Scientific and Technical Information (OSTI), January 2014. http://dx.doi.org/10.2172/1119593.
Повний текст джерелаPepi, Marc S., Todd Palmer, Jennifer Sietins, Jonathan Miller, Dan Berrigan, and Ricardo Rodriquez. Advances in Additive Manufacturing. Fort Belvoir, VA: Defense Technical Information Center, July 2016. http://dx.doi.org/10.21236/ad1012134.
Повний текст джерелаTorres Chicon, Nesty. Additive Manufacturing Technologies Survey. Office of Scientific and Technical Information (OSTI), August 2020. http://dx.doi.org/10.2172/1658439.
Повний текст джерелаDehoff, Ryan R., and Michael M. Kirka. Additive Manufacturing of Porous Metal. Office of Scientific and Technical Information (OSTI), June 2017. http://dx.doi.org/10.2172/1362246.
Повний текст джерелаSbriglia, Lexey Raylene. Embedding Sensors During Additive Manufacturing. Office of Scientific and Technical Information (OSTI), August 2015. http://dx.doi.org/10.2172/1209455.
Повний текст джерелаGrote, Christopher John. The Frontiers of Additive Manufacturing. Office of Scientific and Technical Information (OSTI), March 2016. http://dx.doi.org/10.2172/1240803.
Повний текст джерела