Добірка наукової літератури з теми "Automotive signalization and lighting"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Automotive signalization and lighting".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Automotive signalization and lighting":
Neumann, Cornelius. "Automotive lighting." Advanced Optical Technologies 9, no. 6 (December 16, 2020): 331–32. http://dx.doi.org/10.1515/aot-2020-0062.
Khanh, Tran Quoc, and Cornelius Neumann. "Illumination optics for indoor lighting, automotive and street lighting." Advanced Optical Technologies 8, no. 1 (February 25, 2019): 11–12. http://dx.doi.org/10.1515/aot-2019-0007.
bpr. "Trends in Automotive Lighting Systems." ATZautotechnology 5, no. 4 (July 2005): 32–36. http://dx.doi.org/10.1007/bf03246903.
Bielawny, Andreas, Thorsten Schupp, and Cornelius Neumann. "Automotive Lighting Continues to Evolve." Optics and Photonics News 27, no. 11 (November 1, 2016): 36. http://dx.doi.org/10.1364/opn.27.11.000036.
PARLAKYILDIZ, Şakir. "Commercial Lighting Design in Human-Centered Lighting Concept." Bitlis Eren Üniversitesi Fen Bilimleri Dergisi 12, no. 1 (March 22, 2023): 140–45. http://dx.doi.org/10.17798/bitlisfen.1205458.
KURTULUS, Orhan Uras. "New Trends and Functionalities in Automotive Tail Lighting." Eurasia Proceedings of Science Technology Engineering and Mathematics 14 (December 31, 2021): 31–38. http://dx.doi.org/10.55549/epstem.1050167.
Yu, Shun-Hsiang, Oliver Shih, Hsin-Mu Tsai, Nawaporn Wisitpongphan, and Richard D. Roberts. "Smart automotive lighting for vehicle safety." IEEE Communications Magazine 51, no. 12 (December 2013): 50–59. http://dx.doi.org/10.1109/mcom.2013.6685757.
Anthony, Blair T. "Lexan polycarbonate for automotive forward lighting." Materials & Design 6, no. 6 (December 1985): 293–302. http://dx.doi.org/10.1016/0261-3069(85)90011-1.
Michenfelder, Steffen, and Cornelius Neumann. "Automotive Pixel Lighting Based on Projectors." ATZ worldwide 115, no. 11 (October 15, 2013): 60–64. http://dx.doi.org/10.1007/s38311-013-0132-5.
Zhu, Yingguang, Lixue Guo, Yuhao Lee, Xianbin Xu, Jing Xie, Guohui Zhang, and Yonglan Hu. "57.4: OLED in Automotive Lighting Applications." SID Symposium Digest of Technical Papers 50, S1 (September 2019): 628–31. http://dx.doi.org/10.1002/sdtp.13592.
Дисертації з теми "Automotive signalization and lighting":
Barbotin, Thomas. "Etude, démonstration et prototypage de dispositifs d’éclairage/signalisation et d’IHM automobiles générant des effets d’images 3D flottantes par holographie synthétique sous illumination LED et multi-LED." Electronic Thesis or Diss., Ecole nationale supérieure Mines-Télécom Atlantique Bretagne Pays de la Loire, 2024. http://www.theses.fr/2024IMTA0396.
To improve the user experience in their vehicles, automotive manufacturers are searching for innovative display and control systems, such as devices producing 3D images. Holography is an attractive solution as it can generate 3D scenes incorporating most of the perceptual cues necessary for the human brain. While mass production of "classic" holograms (i.e., optically recorded) for automotive applications has strong constraints, surface relief synthetic holograms are compatible with nano-imprint technology, allowing easy large-scale production. However, the automotive environment imposes additional constraints of cost, system compactness, and eye safety. In this automotive context, the use of LED illumination for holograms is therefore highly preferable to the commonly used laser illumination. We demonstrate an LED illuminated holographic solution that creates the perception of a floating object, targeting an in-vehicle human-machine interface (HMI) application. We also present a statistical study confirming that a large majority of observers perceive the floating 3D scene correctly. Finally, we demonstrate an even more compact extension of the approach enabling simultaneous illumination by multiple distinct LED sources of a single synthetic hologram, generating the perception of floating 3D image
Haeberlin, Marc W. "Adaptive Automotive Lighting Systems." DigitalCommons@CalPoly, 2015. https://digitalcommons.calpoly.edu/theses/1480.
Přibyl, Matěj. "Ocenění závodu Automotive Lighting s.r.o." Master's thesis, Vysoká škola ekonomická v Praze, 2012. http://www.nusl.cz/ntk/nusl-197095.
Bogyová, Zuzana. "Odhad hodnoty spoločnosti Automotive lighting, s.r.o." Master's thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-149845.
Solomon, Ramzi, P. Pillay, and A. B. Sebitosi. "An automotive interior lighting application using white light-emitting diodes." Thesis, Cape Town : Cape Town University, 2008. http://hdl.handle.net/10019.1/357.
Energy drives technological societies. Developing countries such as South Africa are caught between the desperate need for economic growth and the emerging obligations to the environment. Efficient technologies can be used to mitigate the impact of these seemingly conflicting requirements in urban and rural environments. In this thesis the commercially available white light-emitting diode (LED) with its inherent efficiency, longevity and mechanical strength, is used to show, that success in energy efficiency can be obtained. Two cases are used to illustrate the need for efficient demand-side technology: the electricity shortages of the Western Cape Province in South Africa and a white LED pilot project in Namulonge, Uganda. The Namulonge Solar-Home System (SHS) is analyzed with the intention of creating a more acceptable general lighting solution. The concept of appropriateness through self-determination is discussed within the context of location-specific information integrated into a design procedure. The major thrust and contribution of this thesis, however, is the design of an interior luminaire for Golden Arrow Bus Services (GABS). This is in part based on the hypothesis that application-specific information will lead to implementation and human-needs success, and is researched, designed, fabricated and then laboratory tested. The biggest challenge to be overcome was the spatial light distribution of the LED array. Thus non-imaging optical lens design became the main focus of this project as it held the key to utilizing available light while conserving the light-systems energy. Circular Fresnel and Linear Fresnel (an adaptation of the concentric design) lenses were designed. Electrical, mechanical and thermal aspects of design are also detailed. Far-field, horizontal plane detection over the specified area is used to best gain the uniformity of distribution. The four criteria namely luminance, illuminance, intensity and étendue (collection efficiency), against which each design and focal length iv configuration is compared to, are extensively explored and eventually lead to a final design. In the first designs, the area of the spatial distribution between 50% and 80% of its relative intensity is collimated. The Hybrid Circular Fresnel and Hybrid Linear Fresnel lenses now redirects the relative intensity in two areas, from 50% to 70% (creating parallel rays) and then from 70% to 100% (away from the central axis), renders a distinct difference is spatial uniformity and a reduction in the peak and offaxis located intensity. All four criteria are met, with a minor adjustment of configuration within the bus internal luminaire spacing, with the hybrid designs. It is proposed that GABS employ polished designs of the Hybrid Circular Fresnel, in any of the configurations, which have collection efficiencies ranging between 64.8% and 78.3%.
Sponsored by the Centre for Renewable and Sustainable Energy Studies, Stellenbosch University
Solomon, Ramzi. "An automotive interior lighting application using white light-emitting diodes." Master's thesis, University of Cape Town, 2008. http://hdl.handle.net/11427/5100.
In this thesis the commercially available white light-emitting diode (LED) with its inherent efficiency, longevity and mechanical strength, is used to show, that success in energy efficiency can be obtained. Two cases are used to illustrate the need for efficient demand-side technology: the electricity shortages of the Western Cape Province in South Africa and a white LED pilot project in Namulonge, Uganda.
Šťastný, Michal. "Optimalizace uspořádání lisovací linky na výrobu reflektorů ve firmě Automotive Lighting." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230428.
Bouček, Filip. "Návrh a posouzení uspořádání nové lakovací linky ve společnosti Automotive Lighting." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-231013.
Krishnan, Srivatsava. "Mechanoluminescent and Phosphorescent Paint Systems for Automotive and Naval Applications." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1437262259.
Grothage, Alexander. "Design of an automotive lighting system : Development of an overall solution for roof mounted LED light bars." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-69608.
Книги з теми "Automotive signalization and lighting":
Engineers, Society of Automotive, and Society of Automotive Engineers. World Congress, eds. Automotive lighting research. Warrendale, PA: Society of Automotive Engineers, 2000.
Engineers, Society of Automotive, and SAE International Congress & Exposition (1995 : Detroit, Mich.), eds. Fiberoptics for automotive lighting. Warrendale, PA, USA: Society of Automotive Engineers, 1995.
Engineers, Society of Automotive, and SAE International Congress & Exposition (1999 : Detroit, Mich.), eds. Advances in automotive lighting technology. Warrendale, PA: Society of Automotive Engineers, 1999.
Engineers, Society of Automotive, and SAE World Congress (2007 : Detroit, Mich.), eds. Automotive lighting technology and human factors in driver vision and lighting. Warrendale, Pa: Society of Automotive Engineers, 2007.
Engineers, Society of Automotive, and SAE World Congress (2006 : Detroit, Mich.), eds. Automotive lighting technology and human factors in driver vision and lighting, rear vision and indirect vision . Warrendale, PA, USA: Society of Automotive Engineers, 2006.
Marvin, Fleischman, and National Risk Management Research Laboratory (U.S.), eds. Pollution prevention assessment for a manufacturer of automotive lighting equipment and accessories. Cincinnati, OH: U.S. Environmental Protection Agency, National Risk Management Research Laboratory, 1995.
Wilson, David. Automotive Lighting. Automotive World Publications, 2000.
Automotive lighting technology. Warrendale, PA: Society of Automotive Engineers, 1998.
Engineers, Society of Automotive. Fiberoptics for Automotive Lighting. Society of Automotive Engineers Inc, 1995.
Automotive Lighting and Human Vision. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-36697-3.
Частини книг з теми "Automotive signalization and lighting":
Volker, Stephan. "Automotive Lighting." In Encyclopedia of Color Science and Technology, 1–10. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-27851-8_116-7.
Volker, Stephan. "Automotive Lighting." In Encyclopedia of Color Science and Technology, 60–69. New York, NY: Springer New York, 2016. http://dx.doi.org/10.1007/978-1-4419-8071-7_116.
Bhise, Vivek D. "Automotive Lighting." In Ergonomics in the Automotive Design Process, 252–86. 2nd ed. New York: CRC Press, 2024. http://dx.doi.org/10.1201/9781003485582-9.
Neacşu, Dorin O. "Lighting." In Automotive Power Systems, 113–32. Boca Raton : CRC Press, 2020.: CRC Press, 2020. http://dx.doi.org/10.1201/9781003053231-7.
Reif, Konrad. "Lighting technology." In Fundamentals of Automotive and Engine Technology, 180–93. Wiesbaden: Springer Fachmedien Wiesbaden, 2014. http://dx.doi.org/10.1007/978-3-658-03972-1_16.
Khanh, T. Q., and J. Kobbert. "Automotive Front Lighting System (Status 2020)." In Encyclopedia of Color Science and Technology, 1–9. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. http://dx.doi.org/10.1007/978-3-642-27851-8_427-1.
Khanh, T. Q., and J. Kobbert. "Automotive Front Lighting System (Status 2020)." In Encyclopedia of Color Science and Technology, 62–70. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-030-89862-5_427.
Bullough, John D. "Solid-State Automotive Lighting: Implications for Sustainability and Safety." In Sustainable Automotive Technologies 2012, 357–61. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-24145-1_48.
Luo, Wen, and Xingyu Luo. "User Experience Research on Automotive Interior Lighting Design." In Advances in Intelligent Systems and Computing, 240–46. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-60492-3_23.
Jung, C., and Th Zahner. "Reliability Management of a Light-Emitting Diode for Automotive Applications." In Solid State Lighting Reliability Part 2, 549–72. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-58175-0_20.
Тези доповідей конференцій з теми "Automotive signalization and lighting":
Strazzanti, Michael A. "Liquid Crystal Automotive Lighting." In SAE 2006 World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2006. http://dx.doi.org/10.4271/2006-01-0712.
Hulse, George R., J. Chris Brown, L. David Howard, and Bobby Shockley. "Automotive Distributed Lighting: Regionally." In SAE 2000 World Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-0342.
Eichhorn, Karsten. "LEDs in automotive lighting." In Integrated Optoelectronic Devices 2006, edited by Klaus P. Streubel, H. Walter Yao, and E. Fred Schubert. SPIE, 2006. http://dx.doi.org/10.1117/12.660145.
Thomas, Werner. "OLED Lighting in Automotive Applications." In Solid-State Lighting. Washington, D.C.: OSA, 2016. http://dx.doi.org/10.1364/ssl.2016.ssw3c.2.
Van Derlofske, John. "Automotive Lighting: Research and Application." In Frontiers in Optics. Washington, D.C.: OSA, 2003. http://dx.doi.org/10.1364/fio.2003.mr2.
Altingöz, Ceren. "Laser technology in automotive lighting." In SPIE LASE, edited by Mark S. Zediker. SPIE, 2014. http://dx.doi.org/10.1117/12.2036519.
Herridge, Mike. "Condensation Simulations of Automotive Lighting Assemblies." In SAE 2003 World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2003. http://dx.doi.org/10.4271/2003-01-1211.
Alisafaee, Hossein. "An introductory course on automotive lighting." In Optics Education and Outreach VI, edited by G. Groot Gregory and Anne-Sophie Poulin-Girard. SPIE, 2020. http://dx.doi.org/10.1117/12.2569755.
Cheng, Y. K., K. W. E. Cheng, K. F. Kwok, N. C. Cheung, C. F. Cheung, and S. To. "LED lighting development for automotive environment." In 7th IET International Conference on Advances in Power System Control, Operation and Management (APSCOM 2006). IEE, 2006. http://dx.doi.org/10.1049/cp:20062223.
Neumann, Rainer. "Future Requirements of Automotive Front Lighting." In SAE 2016 World Congress and Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2016. http://dx.doi.org/10.4271/2016-01-1406.
Звіти організацій з теми "Automotive signalization and lighting":
Elliott, Amy, and Joseph Wing. Binder Jet Tooling for Automotive Lighting Industry. Office of Scientific and Technical Information (OSTI), April 2020. http://dx.doi.org/10.2172/1615209.
Fleischman, M., B. Couch, A. Handmaker, and G. P. Looby. Environmental research brief: Pollution prevention assessment for a manufacturer of automotive lighting equipment and accessories. Office of Scientific and Technical Information (OSTI), August 1995. http://dx.doi.org/10.2172/114465.