Готові списки джерел за темами / Automatic control- Power system

Добірка наукової літератури з теми "Automatic control- Power system"

Автор: Grafiati
Опубліковано: 6 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Automatic control- Power system".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Automatic control- Power system"

1

Dobarina, O. V., and K. V. Beglov. "AUTOMATIC POWER CONTROL SYSTEM OF NPP POWER UNIT." Scientific notes of Taurida National V.I. Vernadsky University. Series: Technical Sciences 3, no. 1 (2019): 91–96. http://dx.doi.org/10.32838/2663-5941/2019.3-1/16.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Aziz, Asma, Amanullah Mto, and Alex Stojsevski. "Automatic Generation Control of Multigeneration Power System." Journal of Power and Energy Engineering 02, no. 04 (2014): 312–33. http://dx.doi.org/10.4236/jpee.2014.24043.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Amirov, Sultan, and Shavkat Mukhsimov. "INVESTIGATION OF THE CURRENT TRANSFORMER CONTROL SYSTEM WITH AUTOMATIC RANGE CONTROL." Technical Sciences 4, no. 1 (January 30, 2021): 4–12. http://dx.doi.org/10.26739/2181-9696-2021-1-1.

Повний текст джерела
Анотація:
The article examines the control system of a current transformer with automatic range control. All multi-limit current transformers allow measuring currents of different ranges with sufficient accuracy in the control systems of traction power supply devices. However, a common disadvantage for all of them is that if it is necessary to change the measurement range, the controlled current of the traction power supply device is disconnected from the power source, i.e. the production or technological process is forced to stop and dismantling and installation work is required. The proposed current transformer with automatic range control eliminates these disadvantages.Keywords:Current transformer, microcontroller, filter, control system, SSR relay, automatic system, harmonic
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Efremova, Tatiana, and Sergey Shchegolev. "Boiler drum automatic power management system." E3S Web of Conferences 222 (2020): 01009. http://dx.doi.org/10.1051/e3sconf/202022201009.

Повний текст джерела
Анотація:
Dynamic properties of boiler sections as control objects are studied. The requirements for mathematical models and the main adjustable parameters in drum boilers are determined, on the basis of which the requirements for the designed model are made. The construction of a block diagram and calculation of transfer functions of the automatic control system of the control object. The main types of disturbances are determined: feed water and steam consumption, consumer load, fuel consumption, and feed water temperature. Each perturbation is represented as a control action. Models of the object using perturbation channels are obtained. The article considers the construction of an effective model of the system of automatic control of the drum boiler power supply based on the system’s working out of disturbing influences. The paper uses the Matlab application software and the Simulink graphical programming environment.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Dai, Shi Yong, Fan Pan, and Fei Liu. "Application of Wide-Area Automatic Switchover System Based on EMS." Applied Mechanics and Materials 325-326 (June 2013): 573–76. http://dx.doi.org/10.4028/www.scientific.net/amm.325-326.573.

Повний текст джерела
Анотація:
The traditional automatic switchover device installed in substation only uses local real-time information to make control strategies, with the logic of device predetermined, so it could not adapt to different operating modes. A new wide-area automatic switchover system based on energy manage system (EMS) is proposed in the paper. The wide-area automatic switchover modeling is established through automated modeling and the real-time rest oration control is implemented. The system solves the power supply restore under serial single power supply failure. By comprehensive use of information of the whole network, the automatic switchover can coordinate with other automatic security devices and protections. In addition, the control strategies and network security will be checked and modified in order to prevent from overload and improve security of automatic switchover strategies. The system has been used in Guangdong power grid of China.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Zhang, Rui, Yan Hong Shen, Cun Yu, Feng Long Li, Ke Wei Pang, and Ling Zhang. "Realization of Automatic Power Control in HVDC Control and Protection System." Applied Mechanics and Materials 716-717 (December 2014): 1226–29. http://dx.doi.org/10.4028/www.scientific.net/amm.716-717.1226.

Повний текст джерела
Анотація:
The paper briefly investigates the importance of power control of HVDC (high voltage direct current) control system in the HVDC projects and focus on the actual analysis and research on the realization of automatic power control in HVDC transmission. It has the important guiding significance for the implementation of automatic power control in HVDC transmission.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Dushutin, K. A., V. A. Ageyev, and Yu A. Vantyusov. "Duplex electromechanical transmission with automatic control system." Traktory i sel hozmashiny 80, no. 8 (August 15, 2013): 12–13. http://dx.doi.org/10.17816/0321-4443-65706.

Повний текст джерела
Анотація:
Electromechanical transmission with automatic module control system including power and technological channels is suggested. Algorithm for resistance determination during segmentary-finger mover operation taking into account power expenditures for driving moment and angular velocity fluctuations is given. Operating ranges of mobile power module with mover mechanical drive and standard Т-25А tractor with КС-2,1 mover were compared.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Chen, Wei Hua, and Yan Wei Chen. "Automatic Voltage Control and Application." Applied Mechanics and Materials 687-691 (November 2014): 3195–98. http://dx.doi.org/10.4028/www.scientific.net/amm.687-691.3195.

Повний текст джерела
Анотація:
Voltage is a key factor not only to power system but also to user. Keep voltage steady is a hot point for researching. Paper proposed keeping steady voltage and improving power quality by using intelligent auto voltage control system. This method is based on the existing power system software and hardware platforms. It is of the advantages of mature technology, small investment, and can improve user’s power quality effectively. Second, the application of auto voltage control on textile manufacture is analyzed. It can improve running environment of textile devices and textile quality
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Lv, Li Ya, and Yong Jun Min. "Power Batteries Pack Test System Based on GPIB Protocol." Advanced Materials Research 328-330 (September 2011): 614–18. http://dx.doi.org/10.4028/www.scientific.net/amr.328-330.614.

Повний текст джерела
Анотація:
A communication and data collection device was designed based on GPIB protocol, with the design of PC control and automatic measurement software, which can complete programmable electronic load control and ambient temperature data acquision, implementation of new energy vehicles for the automatic measurement of battery pack and Data records, simplifying test system design. The results show that the system operation and reliable performance, advanced features, can realize the new energy vehicle power battery pack automated testing of complex working conditions.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Bairi, B. R., and D. Das. "Automatic Power Control System of Dhruva Nuclear Reactor." IFAC Proceedings Volumes 19, no. 16 (December 1986): 107–12. http://dx.doi.org/10.1016/s1474-6670(17)59367-2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Automatic control- Power system"

1

Falkner, Catherine M. "Robust output feedback controllers for power system stabilization." Diss., Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/14802.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Uurtonen, Tommi. "Optimized Power Control for CDMA System using Channel Prediction." Thesis, Linköping University, Department of Science and Technology, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-3697.

Повний текст джерела
Анотація:

In an optimal power control scheme for a Code Division Multiple Access (CDMA) system all mobile stations signals should arrive to the base station at equal power. If not, stronger singals may cause too much interference and block out weaker ones. Commonly used power control schemes utilizes the Signal to Interference Ratio (SIR) to design a Power Control Command (PCC) to adjust the transmit power of the mobile station. A significant problem within the conventional methods is the slow SIR recovery due to deep channel fades. Conventional methods base the PCC on the previous channel state when in fact, the channel state may have significantly changed when transmission occurs. These channel changes may cause the SIR to drop or rise drastically and lead to uncontrollable Multi Access Interference (MAI) resulting in power escalation and making the system unstable. In order to overcome power escalation and improve the recovery from deep fades a novel power control method has been developed. Based on Linear Quadratic Control and Kalman filtering for channel prediction this method designs the PCC based on the coming channel state instead of the current. This optimizes the PCC for the channel state where transmission occurs. Simulations show that this control scheme outperforms previous methods by making the impacts of the deep fades less severe on the SIR and also improves the overall SIR behaviour.

Стилі APA, Harvard, Vancouver, ISO та ін.
3

Hicks, Glenn V. "An investigation of automatic generation control for an isolated power system." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0011/MQ34184.pdf.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Prinsloo, Gerhardus Johannes. "Automatic positioner and control system for a motorized parabolic solar reflector." Thesis, Stellenbosch : Stellenbosch University, 2014. http://hdl.handle.net/10019.1/96137.

Повний текст джерела
Анотація:
Thesis (MEng)--Stellenbosch University, 2014.
ENGLISH ABSTRACT: Most rural African villages enjoy high levels of sunlight, but rolling out solar power generation technology to tap into this renewable energy resource at remote rural sites in Africa pose a number of design challenges. To meet these challenges, a project has been initiated to design, build and test/evaluate a knock down 3 kW peak electrical stand-alone self-tracking dual-axis concentrating solar power system. This study focusses on the mechatronic engineering aspects in the design and development of a dynamic mechatronic platform and digital electronic control system for the stand-alone concentrating solar power system. Design specifications require an accurate automatic positioner and control system for a motorized parabolic solar reflector with an optical solar harnessing capacity of 12 kWt at solar noon. It must be suitable for stand-alone rural power generation. This study presents a conceptual design and engineering prototype of a balanced cantilever tilt-and-swing dual-axis slew drive actuation means as mechatronic solar tracking mobility platform for a ∼12 m2 lightweight parabolic solar concentrator. Digital automation of the concentrated solar platform is implemented using an industrial Siemens S7-1200 programmable logic controller (PLC) with digital remote control interfacing, pulse width modulated direct current driving, and electronic open loop/closed loop solar tracking control. The design and prototype incorporates off-the-shelf components to support local manufacturing at reduced cost and generally meets the goal of delivering a dynamic mechatronic platform for a concentrating solar power system that is easy to transport, assemble and install at remote rural sites in Africa. Real-time experiments, conducted in the summer of South Africa, validated and established the accuracy of the engineering prototype positioning system. It shows that the as-designed and -built continuous solar tracking performs to an optical accuracy of better than 1.0◦ on both the azimuth and elevation tracking axes; and which is also in compliance with the pre-defined design specifications. Structural aspects of the prototype parabolic dish are evaluated and optimized by other researchers while the Stirling and power handling units are under development in parallel projects. Ultimately, these joint research projects aim to produce a locally manufactured knock down do-it-yourself concentrated solar power generation kit, suitable for deployment into Africa.
AFRIKAANSE OPSOMMING: Landelike gebiede in Afrika geniet hoë vlakke van sonskyn, maar die ontwerp van betroubare sonkrag tegnologie vir die benutting van hierdie hernubare energie hulpbron by afgeleë gebiede in Afrika bied verskeie uitdagings. Om hierdie uitdagings te oorkom, is ’n projek van stapel gestuur om ’n afbreekbare 3 kW piek elektriese alleenstaande selfaangedrewe dubbel-as son-konsentreeder te ontwerp, bou en te toets. Hierdie studies fokus op die megatroniese ingenieurs-aspekte in die ontwerp en ontwikkeling van ’n dinamiese megatroniese platform en ’n digitale elektroniese beheerstelsel vir die alleenstaande gekonsentreerde sonkrag stelsel. Ontwerp spesifikasies vereis ’n akkurate outomatiese posisionering en beheer stelsel vir ’n motor aangedrewe paraboliese son reflekteerder met ’n optiesekollekteer- kapasiteit van 12 kWt by maksimum sonhoogte, en veral geskik wees vir afgeleë sonkrag opwekking. Hierdie studie lewer ’n konsepsuele ontwerp en ingenieurs-prototipe van ’n gebalanseerde dubbelas swaai-en-kantel swenkrat aandrywingsmeganisme as megatroniese sonvolg platform vir ’n ∼12 m2 liggewig paraboliese son konsentreerder. Digitale outomatisering van die son konsentreerder platform is geimplementeer op ’n industriële Siemens S7-1200 programmeerbare logiese beheerder (PLB) met ’n digitale afstandbeheer koppelvlak, puls-wydte-gemoduleerde gelykstroom aandrywing en elektroniese ooplus en geslote-lus sonvolg beheer. Die ontwerp en prototipe maak gebruik van beskikbare komponente om lae-koste plaaslike vervaardiging te ondersteun en slaag in die algemeen in die doel om ’n dinamiese megatroniese platform vir ’n gekonsentreerde sonkrag stelsel te lewer wat maklik vervoer, gebou en opgerig kan word op afgeleë persele in Afrika. Intydse eksperimente is gedurende die somer uitgevoer om die akkuraatheid van die prototipe posisionering sisteem te evalueer. Dit toon dat die sisteem die son deurlopend volg met ’n akkuraatheid beter as 1.0◦ op beide die azimut en elevasie sonvolg asse, wat voldoen aan die ontwerp spesifikasies. Strukturele aspekte van die prototipe paraboliese skottel word deur ander navorsers geëvalueer en verbeter terwyl die Stirling-eenheid en elektriese sisteme in parallelle projekte ontwikkel word. Die uiteindelike doel met hierdie groepnavorsing is om ’n plaaslik vervaardigde doen-dit-self sonkrag eenheid te ontwikkel wat in Afrika ontplooi kan word.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Zhou, Huafeng, and 周華鋒. "Design of grid service-based power system control centers for future electricity systems." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2008. http://hub.hku.hk/bib/B40687429.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Zhou, Huafeng. "Design of grid service-based power system control centers for future electricity systems." Click to view the E-thesis via HKUTO, 2008. http://sunzi.lib.hku.hk/hkuto/record/B40687429.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Oukati, Sadegh Mahmoud. "Control of power electronic devices (FACTS) to enhance power system stability." Thesis, University of Strathclyde, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.275177.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Zonetti, Daniele. "Energy-based modelling and control of electric power systems with guaranteed stability properties." Thesis, Université Paris-Saclay (ComUE), 2016. http://www.theses.fr/2016SACLS118/document.

Повний текст джерела
Анотація:
Pour traiter les systèmes non linéaires, à grande échelle, multi-domaine tels que les systèmes électriques de puissance, nous avons remarqué dans les dernières années un intérêt croissant pour les techniques de modélisation, analyse et contrôle basées sur la notion d'énergie. L'énergie est en fait un concept fondamental en science et en ingénierie, où typiquement les systèmes dynamiques sont regardés comme des dispositifs de transformation d'énergie. Cette perspective est particulièrement utile pour étudier des systèmes non linéaires assez complexes, qui peuvent être décomposés en sous-systèmes plus simples, caractérisés au niveau énergétique, et qui, à travers leurs interconnexions, déterminent le comportement global du système tout entier. Il représente bien évidemment le langage le plus naturel et intuitif pour représenter les systèmes électriques de puissance. En particulier, l'utilisation de systèmes Hamiltoniens à Ports a eu un impact très fort dans différentes applications, plus précisément dans le cas de systèmes mécaniques, électriques et électromécaniques. Dans ce contexte alors, l'approche Hamiltonien à Ports représentent sans doute une base solide qui montre une nouvelle fac{c}on d'aborder les problèmes d'analyse et contrôle de systèmes électriques de puissance. Basée sur cette approche, la thèse est structurée en trois étapes fondamentales:1 - Modélisation d'une classe très générale de systèmes électriques de puissance, basée sur la théorie des graphes et la formulation en Systèmes Hamiltoniens à Ports des composantes.2 - Modélisation, analyse et commande de systèmes de transmission de courant continu haute tension. Avec l'intention de construire un pont entre la théorie et les éventuelles applications, un des objectifs fondamentaux consiste à établir des relations évidentes entre les solutions adoptées dans la pratique et les solutions obtenues à travers une analyse mathématique précise.3 - Travaux apparentés de l'auteur, dans différents domaines des systèmes électriques de puissance: systèmes ac conventionnels et micro réseaux
To deal with nonlinear, large scale, multidomain, systems, as power systems are, we have witnessed in the last few years an increasing interest in energy–based modeling, analysis and controller design techniques. Energy is one of the fundamental concepts in science and engineering practice, where it is common to view dynamical systems as energy-transformation devices. This perspective is particularly useful in studying complex nonlinear systems by decomposing them into simpler subsystems which, upon interconnection, add up their energies to determine the full systems behavior. This is obviously the most natural and intuitive language to represent power systems. In particular, the use of port–Hamiltonian (pH) systems has been already proven highly successful in many applications, namely for mechanical, electrical and electromechanical systems. The port-Hamiltonian systems paradigm theremore provides a solid foundation, which suggests new ways to look at power systems analysis and control problems.Based on this framework, this thesis is structured in three main steps.1 - Modelling of a generalized class of electric power systems, based on graph theory and port-Hamiltonian representation of the individual components.2 - Modelling, analysis and control of multiterminal hvdc transmission systems. With the intention to bridge the gap between theory and applications, one of the main concerns is to establish connections between existing engineering solutions, usually derived via ad hoc considerations, and the solutions stemming from theoretical analysis.3 - Additional contributions of the author in other fields of electric power systems, including traditional ac power systems an microgrids
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Yoon, Hyungjoo. "Spacecraft Attitude and Power Control Using Variable Speed Control Moment Gyros." Diss., Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/4850.

Повний текст джерела
Анотація:
A Variable Speed Control Moment Gyro (VSCMG) is a recently introduced actuator for spacecraft attitude control. As its name implies, a VSCMG is essentially a single-gimbal control moment gyro (CMG) with a flywheel allowed to have variable spin speed. Thanks to its extra degrees of freedom, a VSCMGs cluster can be used to achieve additional objectives, such as power tracking and/or singularity avoidance, as well as attitude control. In this thesis, control laws for an integrated power/attitude control system (IPACS) for a satellite using VSCMGs are introduced. The power tracking objective is achieved by storing or releasing the kinetic energy in the wheels. The proposed control algorithms perform both the attitude and power tracking goals simultaneously. This thesis also provides a singularity analysis and avoidance method using CMGs/VSCMGs. This issue is studied for both the cases of attitude tracking with and without a power tracking requirement. A null motion method to avoid singularities is presented, and a criterion is developed to determine the momentum region over which this method will successfully avoid singularities. The spacecraft angular velocity and attitude control problem using a single VSCMG is also addressed. A body-fixed axis is chosen to be perpendicular to the gimbal axis, and it is controlled to aim at an arbitrarily given inertial direction, while the spacecraft angular velocity is stabilized. Finally, an adaptive control algorithm for the spacecraft attitude tracking in case when the actuator parameters, for instance the spin axis directions, are uncertain is developed. The equations of motion in this case are fully nonlinear and represent a Multi-Input-Multi-Output (MIMO) system. The smooth projection algorithm is applied to keep the parameter estimates inside a singularity-free region. The design procedure can also be easily applied to general MIMO dynamical systems.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Choi, Sungyun. "Autonomous state estimation and its application to the autonomous operation of the distribution system with distributed generations." Diss., Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/50250.

Повний текст джерела
Анотація:
The objective of this thesis is to propose guidelines for advanced operation, control, and protection of the restructured distribution system by designing the architecture and functionality for autonomous operation of the distribution system with DGs. The proposed architecture consists of (1) autonomous state estimation and (2) applications that enable autonomous operation; in particular, three applications are discussed: setting-less component protection, instant-by-instant management, and short-term operational planning. Key elements of the proposed approach have been verified: (1) the proposed autonomous state estimation has been experimentally tested using laboratory test systems and (2) the feasibility of the setting-less component protection has been tested with numerical simulations.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Automatic control- Power system"

1

1954-, Sun Yuanzhang, and Mei Shengwei 1964-, eds. Nonlinear control systems and power system dynamics. Boston, MA: Kluwer Academic Publishers, 2001.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Bai, Shushan. Dynamic analysis and control system design of automatic transmissions. Warrendale, Pennsylvania, USA: SAE International, 2013.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Bevrani, Hassan. Robust Power System Frequency Control. Boston, MA: Springer Science+Business Media, LLC, 2009.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Automatic learning techniques in power systems. Boston: Kluwer Academic, 1998.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Power system control technology. Englewood Cliffs: Prentice-Hall, 1986.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Xu, Zhao, and Zhun Fan. Evolutionary computing for intelligent power system optimization and control. Hauppauge, N.Y: Nova Science Publishers, 2010.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Brown, David. Control engineering: Control system power and grounding better practice. Burlington, MA: Newnes, 2004.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Takashi, Hiyama, ed. Intelligent automatic generation control. Boca Raton: Taylor & Francis, 2011.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Momoh, James A. Electric power distribution, automation, protection, and control. Boca Raton: CRC Press, 2008.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Control of electric machine drive system. Hoboken, N.J: Wiley-IEEE, 2011.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Automatic control- Power system"

1

Sil, Amitava, and Saikat Maity. "Automatic Generation and Control." In Industrial Power Systems, 183–87. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003231240-18.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Debs, Atif S. "Automatic Generation Control." In Modern Power Systems Control and Operation, 203–37. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4613-1073-0_6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Pavlovsky, V., and A. Steliuk. "Modeling of Automatic Generation Control in Power Systems." In PowerFactory Applications for Power System Analysis, 157–73. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-12958-7_7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Devarapalli, Teresa, and M. S. Krishnarayalu. "Automatic Generation Control of Multi-Area Power System." In Energy and Exergy for Sustainable and Clean Environment, Volume 2, 245–60. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-8274-2_17.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Pota, Hemanshu Roy. "Design of the Automatic Voltage Regulator." In The Essentials of Power System Dynamics and Control, 155–72. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-8914-5_4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Xie, Xiqiang. "Design of Automatic Control System for VSCF Wind Power Generation." In Advances in Intelligent Systems and Computing, 623–27. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-43309-3_89.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Buduma, Parusharamulu, Madan Kumar Das, Ashwani Kumar Sharma, Gayadhar Panda, and Sukumar Mishra. "Automatic Generation Control for Hybrid Power System in Deregulated Environment." In Advances in Sustainability Science and Technology, 381–94. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-9033-4_29.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Adewole, Adeyemi Charles, and Raynitchka Tzoneva. "Substation Automation and Control." In Power System Protection in Smart Grid Environment, 453–82. Boca Raton : Taylor & Francis, a CRC title, part of the Taylor & Francis imprint, a member of the Taylor & Francis Group, the academic division of T&F Informa, plc, 2019.: CRC Press, 2019. http://dx.doi.org/10.1201/9780429401756-13.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Zhang, Guoqin. "PSCAD Simulation for the Maximum Power Point Tracking Control of a Photovoltaic Power System." In 2011 International Conference in Electrics, Communication and Automatic Control Proceedings, 1151–58. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-8849-2_147.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Vrakopoulou, Maria, Peyman Mohajerin Esfahani, Kostas Margellos, John Lygeros, and Göran Andersson. "Cyber-Attacks in the Automatic Generation Control." In Cyber Physical Systems Approach to Smart Electric Power Grid, 303–28. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-45928-7_11.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Automatic control- Power system"

1

Bobbitt, Brock, Stephen Garner, Brenton Cox, John Martens, and Mark Fecke. "Manual vs. Automatic Boiler Controls: A Historical Perspective From Relevant Codes and Standards." In ASME 2017 Power Conference Joint With ICOPE-17 collocated with the ASME 2017 11th International Conference on Energy Sustainability, the ASME 2017 15th International Conference on Fuel Cell Science, Engineering and Technology, and the ASME 2017 Nuclear Forum. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/power-icope2017-3616.

Повний текст джерела
Анотація:
Advances in computer hardware over the past several decades have helped to expand the capabilities of boiler control systems in power generating applications. These greater capabilities have supported a proliferation of computer controlled boiler functions and, in many cases, replaced human operator functions with automated functions. Nevertheless, the human operator remains a central piece in many modern boiler control systems. One reason the operator is still present in the control room is that computer controls and human operators each have distinct advantages. Consequently, a boiler control system design should balance the best integration of automatic and operator control functions while balancing various requirements and design goals. The following question should then be answered: what roles or functions should be given to the operator vs. to the computer controls? We will address this question by considering the guidance of relevant codes and standards, which have historically influenced control system design for large boilers in power generating applications. An analysis is performed on current and historically relevant standards and codes, including NFPA 85 and its predecessors, to consider how the guidance has changed along with control system technology. The analysis examines provisions directed toward manual and automatic controls to better understand the types of operations that are best-suited for manual functions versus automatic functions. Over time, NFPA 85 and its predecessors responded to the growing automation capabilities by requiring more automatic controls. While the emphasis placed on automatic controls for safety functions has grown, these standards suggest a balance or combination of automatic and manual controls for safety functions. These concepts are considered relative to those of Inherently Safe Design commonly applied in the chemical process industry.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Ejegi, E. E., J. A. Rossiter, and P. Trodden. "A survey of techniques and opportunities in power system automatic generation control." In 2014 UKACC International Conference on Control (CONTROL). IEEE, 2014. http://dx.doi.org/10.1109/control.2014.6915197.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Tai-Ping Sun, Chia-Hung Wang, and Jia-Hao Li. "Digital automatic power control system design." In International Conference on Automatic Control and Artificial Intelligence (ACAI 2012). Institution of Engineering and Technology, 2012. http://dx.doi.org/10.1049/cp.2012.1122.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Liu, Chenlei, and Xin Liu. "Inductive Power Transfer System with Automatic Control." In 2019 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2019. http://dx.doi.org/10.1109/wow45936.2019.9030678.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Vlad, Ciprian, Marian Barbu, and Silviu Epure. "Low power autonomous wind system automatic control." In 2016 International Conference on Development and Application Systems (DAS). IEEE, 2016. http://dx.doi.org/10.1109/daas.2016.7492548.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Zhu, Jianchun, and Zhixiong Huang. "Automatic Power Adjustment in MROF System." In 2017 International Conference on Mechanical, Electronic, Control and Automation Engineering (MECAE 2017). Paris, France: Atlantis Press, 2017. http://dx.doi.org/10.2991/mecae-17.2017.37.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

S, Mohan, Rajkumar K, Rajakumar P, Hari Pradosh S M, Gandhi S, and Balasakthishwaran M. "Automatic Solar Tracking System." In 2022 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS). IEEE, 2022. http://dx.doi.org/10.1109/icpects56089.2022.10047670.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Wang, Haiyan, Chengyong Huang, Junhong Zhou, Wenzhuo Lian, and Kang Hou. "Automatic Control System of Transportation Equipment for Power Transmission Line." In 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022). AHFE International, 2022. http://dx.doi.org/10.54941/ahfe1002324.

Повний текст джерела
Анотація:
In this paper, the automatic control system of transportation equipment for power transmission line is studied to realize the unmanned operation of the equipment. The speed control system, weighting system, sensor system for sensing the surrounding environment, slope detection system, operation state system and automatic parking system are installed in transportation equipment for power transmission line. So the automatic control system improves the work efficiency, reliability and safety of transportation equipment. In order to realize the unmanned control of transportation equipment for power transmission line, the overall structure and control is designed to realize the automatic work of the transportation equipment.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Zhao, Xia. "Research on automatic tracking solar power system." In 2011 International Conference on Electrical and Control Engineering (ICECE). IEEE, 2011. http://dx.doi.org/10.1109/iceceng.2011.6057014.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Durai, C. Ramesh Babu, B. Vipulan, T. Abbas Khan, and T. S. Rishi Prakash. "Solar Powered Automatic Irrigation System." In 2018 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS). IEEE, 2018. http://dx.doi.org/10.1109/icpects.2018.8521604.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Automatic control- Power system"

1

Fowler. L51754 Field Application of Electronic Gas Admission with Cylinder Pressure Feedback for LB Engines. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), June 1996. http://dx.doi.org/10.55274/r0010363.

Повний текст джерела
Анотація:
�The purpose of this project was to evaluate the performance of electronic fuel gas admission valves and effects of continuous automatic cylinder balancing of large bore natural gas engines under actual field conditions. These goals have already been met under laboratory conditions at the Colorado State University Engines and Energy Conversion Laboratory in Fort Collins. The specific project objectives were to:1. Extend the feasibility of electronic fuel gas admission valves where gas valve timing and duration are varied to optimize fuel control and charge mixing from the laboratory environment to actual field applications. 2. Extend the feasibility of closed loop control using in-cylinder pressure sensors to achieve continuous, automatic power cylinder balancing from the laboratory environment to actual field applications. 3. Repeat the benefits of automatic continuous cylinder balancing shown in the laboratory testing under actual field conditions (i.e. fuel savings, improved cylinder misfire rates, improved emissions levels). In order to accomplish these objectives, the Woodward Governor Company AutoBalance TM 5000 control system was installed and tested at four host sites. Although the specific test plan differed slightly for the four host sites, the focus of the test program was consistent. The primary objective was to evaluate the effects of engine balance and the performance of the control system by testing a matrix of varying engine loads and speeds. Load and speed are the two primary control parameters affecting engine balance. Other tests were conducted to determine the effects of the electronic gas admission valve (EGAV) configuration (i.e. start of admission, end of admission, and duration).
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Zykov, A. V., and V. A. Junín. AUTOMATIC CONTROL SYSTEM FOR THE DRUM DRYER. The scientific heritage, 2020. http://dx.doi.org/10.18411/2071-9485-2020-4666.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Neiers, James W. Harmonizing Automatic Test System Assets, Drivers, and Control Methodologies. Fort Belvoir, VA: Defense Technical Information Center, July 1999. http://dx.doi.org/10.21236/adb247996.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Author, Not Given. Integrated control of next generation power system. Office of Scientific and Technical Information (OSTI), February 2010. http://dx.doi.org/10.2172/1025118.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Mathur, A., and C. Koch. Solar central receiver power plant control system concept. Office of Scientific and Technical Information (OSTI), July 1988. http://dx.doi.org/10.2172/6914107.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Dagle, J. E., D. W. Winiarski, and M. K. Donnelly. End-use load control for power system dynamic stability enhancement. Office of Scientific and Technical Information (OSTI), February 1997. http://dx.doi.org/10.2172/484515.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Kirby, B. J. Frequency Control Concerns in the North American Electric Power System. Office of Scientific and Technical Information (OSTI), March 2003. http://dx.doi.org/10.2172/885842.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Unknown. INTEGRATED SYSTEM TO CONTROL PRIMARY PM 2.5 FROM ELECTRIC POWER PLANTS. Office of Scientific and Technical Information (OSTI), June 2001. http://dx.doi.org/10.2172/785168.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Unknown. INTEGRATED SYSTEM TO CONTROL PRIMARY PM 2.5 FROM ELECTRIC POWER PLANTS. Office of Scientific and Technical Information (OSTI), January 2001. http://dx.doi.org/10.2172/788930.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Unknown. INTEGRATED SYSTEM TO CONTROL PRIMARY PM 2.5 FROM ELECTRIC POWER PLANTS. Office of Scientific and Technical Information (OSTI), October 2000. http://dx.doi.org/10.2172/789054.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Automatic control- Power system" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії