Готові списки джерел за темами / Aluminum Metallurgy

Зміст

  1. Статті в журналах
  2. Дисертації
  3. Книги
  4. Частини книг
  5. Тези доповідей конференцій
  6. Звіти організацій

Добірка наукової літератури з теми "Aluminum Metallurgy"

Автор: Grafiati
Опубліковано: 4 червня 2021
Оновлено: 19 лютого 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Aluminum Metallurgy".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Aluminum Metallurgy"

1

Hildeman, Gregory J., and Michael J. Koczak. "Aluminum Powder Metallurgy." JOM 38, no. 8 (August 1986): 30–32. http://dx.doi.org/10.1007/bf03257784.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Kustov, A. D., and O. G. Parfenov. "High-speed aluminum metallurgy." Doklady Chemistry 462, no. 2 (June 2015): 149–51. http://dx.doi.org/10.1134/s0012500815060075.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Takeda, Yoshinobu, Yusuke Odani, and Tetsuya Hayashi. "Powder metallurgy of aluminum alloys." Bulletin of the Japan Institute of Metals 27, no. 10 (1988): 789–96. http://dx.doi.org/10.2320/materia1962.27.789.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Bolaños-Bernal, Sergio Esteban, and Irma Angarita-Moncaleano. "Graphene reinforced aluminum matrix composite obtaining by powder metallurgy." ITECKNE 16, no. 2 (December 16, 2019): 18–24. http://dx.doi.org/10.15332/iteckne.v16i2.2353.

Повний текст джерела
Анотація:
Several researchers have reported graphene as an ideal reinforcement for composite materials due to its interesting properties [1]. The graphene-reinforced aluminium matrix composite material was obtaining by powder metallurgy. This study investigated the effect of aluminum powder morphology on compaction capacity and mechanical strength of composite material. Different milling times were used to determine the optimal time required in manufacturing. The proper compaction load was determined change its values and analyzing the effect of the different loads on the characteristics of the composite. Sintering parameters were established according to previous studies employed by other researchers. Finally, it is determined that with 0.5% wt graphene presents phenomena of grain refinement and higher electrical conductivity of the compound with respect to powder metallurgical aluminum.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

TAKEDA, Yoshinobu. "A prospect of aluminum powder metallurgy." Journal of Japan Institute of Light Metals 37, no. 10 (1987): 639–45. http://dx.doi.org/10.2464/jilm.37.639.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Pramanik, Dipankar. "Aluminum-Based Metallurgy for Global Interconnects." MRS Bulletin 20, no. 11 (November 1995): 57–60. http://dx.doi.org/10.1557/s0883769400045590.

Повний текст джерела
Анотація:
In an integrated circuit (IC), the global interconnects are used to run power and ground to the individual transistors as well as to send signals across the chip. The width of interconnects can vary, depending on the current that is carried by the interconnect. Figure 1 shows a cross section of a double-metal complementary metal oxide semiconductor (CMOS) circuit illustrating the major components of a multilevel metallization circuit. The global interconnect connects to the diffusion and polysilicon gates through the contacts. The intermetal dielectric electrically separates the different levels of interconnect. The connection between the global interconnects at adjacent levels is made through the vias. The choice of a global interconnect for a multilevel metallization forces one to consider how the interaction between the various components of this system can affect the performance of the interconnect. For example, the intermetal dielectric changes the mechanical stress in the interconnect; the presence of W plugs in vias can affect the electromigration resistance of interconnects. In this article, we will examine the problems that are encountered when using Al alloys as a global interconnect and illustrate how the material properties can be modified to solve these problems.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Kulkarni, G. J., D. Banerjee, and T. R. Ramachandran. "Physical metallurgy of aluminum-lithium alloys." Bulletin of Materials Science 12, no. 3-4 (September 1989): 325–40. http://dx.doi.org/10.1007/bf02747140.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Donaldson, I. W. "High Thermal Conductivity Aluminum Powder Metallurgy Materials." Materials Science Forum 783-786 (May 2014): 120–25. http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.120.

Повний текст джерела
Анотація:
High thermal conductivity aluminum has special advantages for electronic packaging and thermal management applications because of the combination of excellent thermal conductivity and relatively low density. Recent development of new press-and-sinter aluminum materials with low levels of alloying that sinters to a high density yielding a high thermal conductivity approaching the theoretical value for pure aluminum. The sintered materials possess thermal conductivity (TC) exceeding 200 w/m-oK (typically 215 – 230 w/m-oK), which makes it unique, since cast and wrought aluminum materials typically fall below 175 w/m-oK. This allows the benefits of powdered metal for low cost manufacturing at high volumes of parts to be realized. This unique combination of low cost and high TC makes these materials an attractive alternative to higher TC materials such as copper. In addition, a metal matrix composites (MMCs) press and sinter approach to tailoring the coefficient of thermal expansion (CTE) can also be used.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Jiang, Z., C. Lucien Falticeanu, and I. T. H. Chang. "Warm Compression of Al Alloy PM Blends." Materials Science Forum 534-536 (January 2007): 333–36. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.333.

Повний текст джерела
Анотація:
With the onging trend of reducing the weight of automotive parts, there is also an increasing trend in the use of light alloys. Recently, aluminum powder metallurgy has been the subject of great attention due to the combination of the lightweight characteristics of aluminium and the efficient material utilisation of the powder metallurgical process, which offer attractive benefits to potential end-users. Conventional press and sinter route of non-ferrous P/M products are based compaction at room temperature prior to the sintering cycle. However, warm compaction process has successfully provided increased density in ferrous powder metallurgy parts, which contributes to better mechanical properties and consequently overall performance of those parts. This study is aimed at exploring the use of warm compaction process to aluminium powder metallurgy. This paper presents a detailed study of the effect of warm compression and sintering conditions on the resultant microstructures and mechanical properties of Al-Cu-Mg-Si PM blend.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

TSUCHIDA, Shigeo. "Degassing and consolidation in aluminum powder metallurgy." Journal of Japan Institute of Light Metals 37, no. 10 (1987): 656–64. http://dx.doi.org/10.2464/jilm.37.656.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Aluminum Metallurgy"

1

Dimayuga, Francisco Cruz II. "Vacuum refining molten aluminum." Thesis, McGill University, 1986. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=72810.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Külünk, Bahadir. "Kinetics of removal of calcium and sodium by chlorination from aluminum and aluminum-1wt% magnesium alloys." Thesis, McGill University, 1992. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=39752.

Повний текст джерела
Анотація:
The kinetics of calcium and sodium removal at 730$ sp circ$C by chlorination from commercial purity (99.7% Al) and aluminum-1wt% magnesium alloys has been investigated. The contribution of chlorine containing gas bubbles, of intermediate reaction products generated by the chlorination process, as well as evaporation through the melt surface, to the removal of calcium and/or sodium has been documented quantitatively. Experimental parameters investigated were chlorine concentration in the gas bubbles and gas flow rate. The measurement of frequency of bubble formation at the tip of the gas bubbling nozzle enabled the surface areas of the bubbles to be estimated which in turn enabled melt phase mass transfer coefficients for the bubbles to be calculated.
It was demonstrated that the removal of calcium and sodium followed first order reaction kinetics with respect to calcium and sodium concentrations. The removal of the above mentioned elements was represented well by a kinetic model in which mass transfer of sodium and calcium in melt phase was rate limiting.
In the case of the magnesium containing alloys, the MgCl$ sb2$ salt phase that was generated during chlorination was found to have a profound effect on the removal of calcium and sodium. The contribution of the salt phase to the removal of these elements was calculated to reach as high as 60%. In commercial purity aluminum, however, while the major contribution to the removal of calcium was from the chlorine containing gas bubbles, the major contribution to the removal of sodium was calculated to be evaporation of sodium through the melt surface.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Jaansalu, Kevin Michael. "Composites by directed oxidation of aluminum alloys." Thesis, McGill University, 1991. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=60591.

Повний текст джерела
Анотація:
The manufacture of ceramic composites has traditionally been a complex and often expensive process. A new processing method, the DIMOX$ sp{ rm TM}$ process, takes advantage of the high temperature oxidation behaviour of aluminum alloys to produce a ceramic-metal composite. Although this process is fairly simple to implement, there has not been any attempt to link the starting materials and manufacturing conditions to the properties of the final composite. This work attempts to identify some critical parameters in the manufacturing process and how they affect the end product. The reaction temperature, alloy composition, and powder bed condition were optimized with respect to the growth process, final composition, and resulting microstructure. These characteristics were then related to the elasticity, strength, fracture toughness, and fracture mode of the final composite.
Aluminum-magnesium-silicon alloys were oxidized into an alumina bed of either Alcan C-70 UNG power or Struers' 400 grit. The process conditions were optimized in air at 1120$ sp circ$C with a 10% silicon, 2% magnesium alloy. The growth rate was dependent on the powder bed. The material was composed of alumina, silicon, aluminum, and trace amounts of magnesium aluminate spinel. The fracture mode was dependent on the composition of the material and the alumina bed.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Baik, Youngmin. "Carbothermal synthesis of aluminum nitride using sucrose." Thesis, McGill University, 1991. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=60643.

Повний текст джерела
Анотація:
In this work, the carbothermal reduction of Al$ sb2$O$ sb3$ to AlN was studied. Several kinds of aluminum oxides including $ alpha$-Al$ sb2$O$ sb3$, $ gamma$-Al$ sb2$O$ sb3$, $ theta$-Al$ sb2$O$ sb3$ and boehmite (AlOOH) were examined in order to observe the differences in reaction behaviour and powder characteristics obtained from each type of precursor. Cane sugar (sucrose) and carbon black were used as carbon sources. Reaction conditions studied were carbon to alumina ratio, temperature and reaction time. Sucrose resulted in a close-to-stoichiometric ratio of Al$ sb2$O$ sb3$:C (1:3.2) achieving full conversion to AlN and produced a regular powder morphology, whilst carbon black required higher ratio ($>$1:4) to reach full conversion with agglomeration of the AlN powder. The optimal reaction temperature was 1600$ sp circ$C with the reaction time being dependent on the Al$ sb2$O$ sb3$ source. The results of the thermodynamic study for the Al-N-O-C system suggest a solid-state reaction process which is consistent with the experimental observations. Moreover, flowing N$ sb2$ gas flushes out the product CO gas and thus forces the equilibrium in favour of AlN formation. Reaction mechanisms are proposed for the two forms of carbon precursor.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Tian, Chenguo. "Filtration of liquid aluminum with reticulated ceramic filters." Thesis, McGill University, 1994. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=28932.

Повний текст джерела
Анотація:
Fluid flow and filtration phenomena associated with filtration of liquid aluminum using reticulated ceramic filters were systematically investigated. It was found that fluid flow through this type of filter could be described by Darcy's Law up to a Reynolds number of 8, and the permeability of this type of filter ranged from about $9 times10 sp{-3}$ to $4 times10 sp{-2} rm mm sp2$.
Parameters affecting filtration processes during the initial period were identified, some of which could be quantified numerically using a 2-D computational domain. According to these numerical analyses, the clean filter coefficient for this type of filter was linearly dependent on the dimensionless Stokes velocity of the suspended particles, had a $-$0.96 power dependence on the Peclet number, a $-$6.93 power dependence on the effective porosity of the filter, and exhibited only a weak dependence on the Reynolds number, in the Darcy velocity regime.
The dynamic behaviour of this type of filter was analyzed theoretically and simulated numerically using newly proposed correlations relating the filter coefficient and the pressure drop to the amount of particles captured within the filter (the specific deposit), and a model describing the morphology of captured particles. The simulated results showed that the filtration efficiency and the pressure drop increased with inlet particle concentration and filtration time; these increases were however, insignificant when the inlet particle concentration was less than 1 ppm for filtration periods of two hours, however, when the inlet concentration (initial and continued) reached 10 ppm, the change became appreciable.
Experimental data, obtained from liquid aluminum filtration tests conducted by the author in both laboratory and industrial settings, compared favourably with the numerical results.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Tenekedjiev, Nedeltcho. "Strontium treatment of aluminum : 17% silicon casting alloys." Thesis, McGill University, 1989. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=61774.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Hernández, Paz Juan Francisco. "Heat treatment and precipitation in A356 aluminum alloy." Thesis, McGill University, 2003. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=19547.

Повний текст джерела
Анотація:
Al-7%Si-0.3Mg (A356) foundry alloy is strontium modified and heat treated in order to obtain optimum mechanical properties. To date, the role that strontium modification plays in the precipitation process during the heat treatment is not well understood. The objective of the present work is to obtain a better understanding of the effect that strontium modification and heat treatment parameters exert on the properties of heat-treated Al-7%Si-0.3Mg alloy. The investigation consisted of a systematic measurement of the electrical conductivity and matrix microhardness of heat-treated coupons under different process conditions. Tensile properties were also measured and a transmission electron microscopy study of critical samples was done. The results obtained in this work indicate that the heat treatment of this alloy can be optimized. Solution heat treatment and artificial aging can be reduced and natural aging manipulated. The use of a continuous heating artificial aging is proposed. During the heat treatment of the A356 alloy under certain conditions not only does the precipitation of the Mg2Si occur, but also that of silicon. It was found that strontium modification does not influence the precipitation kinetics of the Mg2Si, but it does retard the precipitation of the silicon out of the matrix.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Moosavi, Khoonsari Elmira. "Reinforced aluminum structure castings for powertrain automotive applications." Thesis, McGill University, 2009. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=66990.

Повний текст джерела
Анотація:
The reinforcement of an Al casting with ferrous inserts (hybrid systems) through a joining technique to utilize both Al alloys (lightness) and Fe-based alloys (stiffness) is of interest, especially in the transportation sector. This work focuses on different technological aspects of cast joining of cast iron to an Al alloy using an intermediate material (or coating). The experimental set up consisted of preparing the insert surface followed by coating the insert, and then, immersing it into an Al melt, and allowing the system to cool down to room temperature. The effects of flux treatment, decarburization, and the coating application, as well as the immersion time in the Al melt on the Al-Fe joint quality were investigated. The microstructure evolution of the reaction layer forming at the insert-coating interface was determined as a function of the coating time and the coating composition, and their effects on the joint properties were evaluated. The relationship between the microstructure and microhardness of the joint zone was established. Decarburization, flux treatment, suitable coating, and optimizing the process parameters improved the joint properties. Combination of "McGill 2" coating alloy and 1 min immersion time (in the Al melt) resulted in the formation of an Al-Fe joint with optimized characteristics. The results showed that the cast joining could be used to strengthen the Al castings and improve their performance.
Le renfort des pièces coulées en aluminium par l'assemblage d'insertions ferreuses (systèmes hybrides) permet de combiner la légèreté de l'aluminium avec la rigidité des alliages à base de fer. Cette technique présente donc un grand intérêt pour plusieurs applications, spécialement dans le secteur des transports. Ce projet porte sur les différents aspects technologiques de la coulée de pièces avec joint aluminium-fonte auquel est ajouté une couche intermédiaire (ou revêtement). La procédure expérimentale a consisté à préparer la surface des insertions, à appliquer le revêtement, puis immerger la pièce dans un bain d'aluminium liquide, pour finalement refroidir le système jusqu'à la température de la pièce. Les effets du traitement par flux, de la décarburisation, et des paramètres de revêtement ainsi que la durée d'immersion dans l'aluminium liquide sur la qualité du joint aluminium-fonte ont été étudiés. L'évolution de la microstructure par la formation d'une zone de réaction à l'interface de l'insertion de réaction et zone du revêtement a été déterminée en fonction de la composition du revêtement er du temps d'immersion dans le revêtement liquide, et leurs effets sur les propriétés du joint été évalués. La corrélation entre la microstructure et la microdureté du joint ont a été établie. La décarburisation, le traitement par flux, l'utilisation d'un revêtement approprié et l'optimisation des paramètres du procédé améliorent significativement les propriétés du joint. L'utilisation du revêtement "McGill 2" avec un temps d'immersion dans le bain d'aluminium d'une minute permet la formation d'un joint Al-Fe avec des caractéristiques morphologiques, d'épaisseur, de microdureté et de composition optimisées. Les résultats montrent que l'insertion de pièces formant un joint peut être utilisée pour renforcer les pièces d'aluminium et
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Stephen, Gail. "Al-Fe-Si intermetallics in 1000 series aluminum alloys." Thesis, McGill University, 1994. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=26424.

Повний текст джерела
Анотація:
Iron and silicon are the major impurities in the 1000 series of wrought aluminum alloys. As the aluminum is recycled, it picks up more and more of these impurities which cannot economically be refined out of the aluminum. When the concentration of these impurities reaches a certain limit (maximum limit in 1000 series is 1 weight percent (Fe+Si)), the aluminum must be downgraded. The Fe and Si form brittle intermetallic phases in these alloys. The two main phases are the plate-like $ beta$-AlFeSi (Al$ sb5$FeSi) and $ alpha$-AlFeSi (Al$ sb8$Fe$ sb2$Si) which has a Chinese Script morphology. The mechanical properties of these alloys are believed to depend largely on the nature of these intermetallics.
In the first part of this study, the conditions at which the intermetallics form, along with the ability of strontium to modify them were investigated. The second part consisted of determining how the morphology of the Al-Fe-Si phases affects the mechanical properties of the worked product. It was found that the formation of the Chinese Script morphology is promoted with increasing cooling rates, Fe/Si ratios and additions of strontium. However, the relative amount of Chinese Script was found to decrease with increasing (Fe+Si) levels. Tensile testing and formability testing (Erichsen ball punch deformation test) revealed that the presence of a Chinese Script morphology of Al-Fe-Si intermetallics (as opposed to the plate-like morphology) imparts no significant beneficial effect on the formability of the final rolled sheet.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Zhang, Chunhui. "Controlled cooling of permanent mold castings of aluminum alloys." Thesis, McGill University, 2003. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=19619.

Повний текст джерела
Анотація:
The permanent mold casting process is a relatively popular and effective casting technology that can produce near-net-shape aluminum components with integrity, particularly for the automotive and aerospace industries. It is well recognized by the casting industry that it is essential to control the cooling of permanent mold castings in order to improve the quality of the castings, so there is a considerable incentive to develop a more effective method of mold cooling to control the temperature distribution of the mold and the casting. The current technologies for controlled cooling are air or water cooling passages and chill inserts. Each of these cooling methods presents certain disadvantages, and none offer optimum cooling control. Based on these considerations, a novel, effective and controllable water-based heat pipe has been successfully developed to be used as a new method of permanent mold cooling where high heat fluxes are normally encountered. Heat pipes featuring this design have been incorporated in an experimental permanent mold made of HI3 tool steel that contains three symmetric steps. Computer modeling for the permanent mold casting process has been accomplished to predict the effect and potential of heat pipe cooling for permanent mold casting. Castings of A3 56 alloy have been produced by this permanent mold. The effects of heat pipe cooling on permanent mold castings have been evaluated by analyzing the temperature distribution of the mold and the casting, as well as by measuring the dendrite arm spacing and shrinkage distribution of the castings. The effect of heat pipe cooling on the mold solidification time of castings of A356 alloy with different coating types was also studied. Industrial trials have been carried out to evaluate this new cooling technology on an industrial scale casting machine. Because the space around the mold installed on a low pressure die casting machine is very limited, it is often very difficult to install the heat pipe in the specific desired location in the mold. A new version flexible heat pipe cooling system has been developed for the industrial casting process. Preliminary and industrial tests of the heat pipe cooling system have been performed. The effects of heat pipe cooling, as well as the effects of using traditional water and air cooling on the low pressure die casting were studied. Data on the cooling rates obtained by heat pipes, as well as some microstructures and measurements of the dendrite arm spacing are presented in this thesis. Modeling and experimental results have shown that the water based heat pipe can provide high cooling rates in casting processes. The dendrite arm spacing (DAS) of A356 alloy is refined considerably by the heat pipes, and changes in the shrinkage pattern are provided by the dramatic changes in the heat flow patterns.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Aluminum Metallurgy"

1

Runge, Jude Mary. The Metallurgy of Anodizing Aluminum. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72177-4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Lumley, R. N. Fundamentals of aluminium metallurgy: Production, processing and applications. Oxford: Woodhead Pub., 2011.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Aluminum recycling. Boca Raton, FL: CRC/Taylor & Francis, 2007.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

A, Belov N., and Glazoff Michael V, eds. Casting aluminum alloys. Amsterdam: Elsevier Science, 2007.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Sorrell, Charles A. Aluminum fluxing salts: A critical review of the chemistry and structure of alkali aluminum halides. [Pittsburgh, Pa.]: U.S. Dept. of the Interior, Bureau of Mines, 1986.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ėskin, G. I. Physical metallurgy of direct chill casting of aluminum alloys. Boca Raton: Taylor & Francis, 2008.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Eskin, D. G. Physical metallurgy of direct chill casting of aluminum alloys. Boca Raton: Taylor & Francis, 2008.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Altenpohl, Dietrich G. Aluminum: technology, applications, and environment: A profile of a modern metal : aluminum from within. 6th ed. Washington, D.C: The Aluminium Association, Inc., 1998.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Povarnit͡sin, Anatoliĭ Aleksandrovich. Nepreryvnoe pressovanie ali͡uminii͡a sposobom "Conform". Ekaterinburg: Avtomatizirovannai͡a laboratorii͡a konstruirovanii͡a sposobov i agregatov nepreryvnoĭ deformat͡sii rastvorov, 1997.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Abramov, V. I͡A. Fiziko-khimicheskie osnovy kompleksnoĭ pererabotki ali͡uminievogo syrʹi͡a: Shchelochnye sposoby. Moskva: "Metallurgii͡a", 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Aluminum Metallurgy"

1

Hummert, K., H. Müller, and C. Spiegelhauer. "Spray forming: Aluminum alloys." In Powder Metallurgy Data, 258–65. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/10689123_15.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Runge, Jude Mary. "Metallurgy Basics for Aluminum Surfaces." In The Metallurgy of Anodizing Aluminum, 191–248. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72177-4_4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Woo, S. H., Min Ku Lee, and Chang Kyu Rhee. "Synthesis of Aluminum Monohydroxide Nanofiber by Electrolysis of Aluminum Plates." In Progress in Powder Metallurgy, 129–32. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.129.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Yu, Seung Hoon, and Kwang Seon Shin. "Fabrication of Aluminum/Aluminum Nitride Composites by Reactive Mechanical Alloying." In Progress in Powder Metallurgy, 181–84. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.181.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Watanabe, Ryuzo, Duk Sun Choi, and Akira Kawasaki. "Gas Chromatographic Analysis of Degassing of Aluminum and Aluminum Alloy Powders." In Progress in Powder Metallurgy, 809–12. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.809.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Runge, Jude Mary. "A Brief History of Aluminum and Its Alloys." In The Metallurgy of Anodizing Aluminum, 1–63. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72177-4_1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Runge, Jude Mary. "A Brief History of Anodizing Aluminum." In The Metallurgy of Anodizing Aluminum, 65–148. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72177-4_2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Runge, Jude Mary. "Anodizing as an Industrial Process." In The Metallurgy of Anodizing Aluminum, 149–90. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72177-4_3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Runge, Jude Mary. "Anodizing as a Corrosion Process." In The Metallurgy of Anodizing Aluminum, 249–80. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72177-4_5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Runge, Jude Mary. "Anodic Aluminum Oxide Growth and Structure." In The Metallurgy of Anodizing Aluminum, 281–320. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72177-4_6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Aluminum Metallurgy"

1

Suprapto, Suprapto, Yatim Lailun Ni’mah, Ita Ulfin, Harmami Harmami, Fredy Kurniawan, Djarot Sugiarso, Hendro Juwono, Kiki Cahayati Hidayatulloh, and Gayu Septiandini. "Optimization of aluminum recovery from aluminum smelting waste using the surface response methodology." In PROCEEDINGS OF THE 3RD INTERNATIONAL SEMINAR ON METALLURGY AND MATERIALS (ISMM2019): Exploring New Innovation in Metallurgy and Materials. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0002649.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

EKVALL, J., and D. CHELLMAN. "Ingot metallurgy aluminum - Lithium alloys for aircraft structure." In 27th Structures, Structural Dynamics and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1986. http://dx.doi.org/10.2514/6.1986-890.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Dhaneswara, Donanta, Al Fauzan Jannatunnaim Yasfi, and Agy Randhiko. "Study of effect partial substitution zirconium silicate and aluminum oxide filler as refractory filler for aluminum casting." In PROCEEDINGS OF THE 3RD INTERNATIONAL SEMINAR ON METALLURGY AND MATERIALS (ISMM2019): Exploring New Innovation in Metallurgy and Materials. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0001915.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Koya, Eitarou, Yoshitoshi Hagiwara, Seishi Miura, Tetsya Hayashi, Toshio Fujiwara, and Mineo Onoda. "Development of Aluminum Powder Metallurgy Composites for Cylinder Liners." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1994. http://dx.doi.org/10.4271/940847.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Rahman, A., N. Zakir, and I. Abu-Mahfouz. "Hybrid Aluminum Matrix Composites (HAMCs) Using Powder Metallurgy Method." In MS&T18. MS&T18, 2018. http://dx.doi.org/10.7449/2018mst/2018/mst_2018_1304_1311.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Rahman, A., N. Zakir, and I. Abu-Mahfouz. "Hybrid Aluminum Matrix Composites (HAMCs) Using Powder Metallurgy Method." In MS&T18. MS&T18, 2018. http://dx.doi.org/10.7449/2018/mst_2018_1304_1311.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

"Influence of Alumina (Al2O3) Nanosized Reinforcements on Dimensional Stability of Pure Aluminum Matrix Nanocomposite." In International Conference on Chemical, Metallurgy and Material Science Engineering. Emirates Research Publishing, 2015. http://dx.doi.org/10.17758/erpub.er815036.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Couchman, Kevin, and Clem Cousino. "The Processing, Properties, and Applications for Aluminum Powder Metallurgy Materials." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1994. http://dx.doi.org/10.4271/940428.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Gapusan, Rontgen B., Everjoy S. Mones, and Magdaleno R. Vasquez. "Fabrication of transparent conducting aluminum thin film via anodization-etching of thermally evaporated aluminum on glass." In PROCEEDINGS OF THE 4TH INTERNATIONAL SEMINAR ON METALLURGY AND MATERIALS (ISMM2020): Accelerating Research and Innovation on Metallurgy and Materials for Inclusive and Sustainable Industry. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0059990.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Islami, Lazuardi Akmal, Suryo Sembodo, and Anawati Anawati. "Anticorrosive behavior of propolis as a green corrosion inhibitor for aluminum." In PROCEEDINGS OF THE 3RD INTERNATIONAL SEMINAR ON METALLURGY AND MATERIALS (ISMM2019): Exploring New Innovation in Metallurgy and Materials. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0001481.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Aluminum Metallurgy"

1

Flumerfelt, J. F. Aluminum powder metallurgy processing. Office of Scientific and Technical Information (OSTI), February 1999. http://dx.doi.org/10.2172/348922.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Aluminum Metallurgy" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії