Добірка наукової літератури з теми "Advanced materials fabrication"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Advanced materials fabrication".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Advanced materials fabrication"
Ohshima, Masahiro. "Processing and Fabrication of Advanced Materials (PFAM)." Seikei-Kakou 22, no. 2 (January 20, 2010): 96. http://dx.doi.org/10.4325/seikeikakou.22.96.
Повний текст джерелаOHMORI, Hitoshi. "Advanced Materials Fabrication for Nano/Micro Technologies." Journal of the Society of Mechanical Engineers 108, no. 1040 (2005): 533. http://dx.doi.org/10.1299/jsmemag.108.1040_533.
Повний текст джерелаAyode Otitoju, Tunmise, Patrick Ugochukwu Okoye, Guanting Chen, Yang Li, Martin Onyeka Okoye, and Sanxi Li. "Advanced ceramic components: Materials, fabrication, and applications." Journal of Industrial and Engineering Chemistry 85 (May 2020): 34–65. http://dx.doi.org/10.1016/j.jiec.2020.02.002.
Повний текст джерелаLikodimos, Vlassis. "Advanced Photocatalytic Materials." Materials 13, no. 4 (February 11, 2020): 821. http://dx.doi.org/10.3390/ma13040821.
Повний текст джерелаChen, Chien Chon, Wern Dare Jheng, Ker Jer Huang, and Jin Shyong Lin. "The Green Materials Fabrication and Advanced Molds Design." Applied Mechanics and Materials 405-408 (September 2013): 2694–98. http://dx.doi.org/10.4028/www.scientific.net/amm.405-408.2694.
Повний текст джерелаRogers, Bill, Gordon W. Bosker, Richard H. Crawford, Mario C. Faustini, Richard R. Neptune, Gail Walden, and Andrew J. Gitter. "Advanced Trans-Tibial Socket Fabrication Using Selective Laser Sintering." Prosthetics and Orthotics International 31, no. 1 (March 2007): 88–100. http://dx.doi.org/10.1080/03093640600983923.
Повний текст джерелаHendricks, Terry, Thierry Caillat, and Takao Mori. "Keynote Review of Latest Advances in Thermoelectric Generation Materials, Devices, and Technologies 2022." Energies 15, no. 19 (October 5, 2022): 7307. http://dx.doi.org/10.3390/en15197307.
Повний текст джерелаMuto, Hiroyuki, Atsushi Yokoi, and Wai Kian Tan. "Electrostatic Assembly Technique for Novel Composites Fabrication." Journal of Composites Science 4, no. 4 (October 20, 2020): 155. http://dx.doi.org/10.3390/jcs4040155.
Повний текст джерелаTAKEYA, H., T. OZAKI, and N. TAKEDA. "SMS-30: Fabrication of Highly Reliable Advanced Grid Structure(SMS-V: SMART MATERIALS AND STRUCTURES, NDE)." Proceedings of the JSME Materials and Processing Conference (M&P) 2005 (2005): 43–44. http://dx.doi.org/10.1299/jsmeintmp.2005.43_3.
Повний текст джерелаTachikawa, Kyoji, and Hiroaki Kumakura. "Fabrication of advanced superconducting materials by rapid quenching techniques." DENKI-SEIKO[ELECTRIC FURNACE STEEL] 57, no. 4 (1986): 333–40. http://dx.doi.org/10.4262/denkiseiko.57.333.
Повний текст джерелаДисертації з теми "Advanced materials fabrication"
Hussain, Irshad. "Synthesis of metal nanoparticles and their applications in advanced materials fabrication." Thesis, University of Liverpool, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.422114.
Повний текст джерелаUhland, Scott A. (Scott Albert) 1973. "Fabrication of advanced ceramic components using Slurry-Based Three Dimensional Printing." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/110881.
Повний текст джерелаMahajan, Amit. "Ferroelectric : CNTs structures fabrication for advanced functional nano devices." Doctoral thesis, Universidade de Aveiro, 2014. http://hdl.handle.net/10773/14148.
Повний текст джерелаThis work is about the combination of functional ferroelectric oxides with Multiwall Carbon Nanotubes for microelectronic applications, as for example potential 3 Dimensional (3D) Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Miniaturized electronics are ubiquitous now. The drive to downsize electronics has been spurred by needs of more performance into smaller packages at lower costs. But the trend of electronics miniaturization challenges board assembly materials, processes, and reliability. Semiconductor device and integrated circuit technology, coupled with its associated electronic packaging, forms the backbone of high-performance miniaturized electronic systems. However, as size decreases and functionalization increases in the modern electronics further size reduction is getting difficult; below a size limit the signal reliability and device performance deteriorate. Hence miniaturization of siliconbased electronics has limitations. On this background the Road Map for Semiconductor Industry (ITRS) suggests since 2011 alternative technologies, designated as More than Moore; being one of them based on carbon (carbon nanotubes (CNTs) and graphene) [1]. CNTs with their unique performance and three dimensionality at the nano-scale have been regarded as promising elements for miniaturized electronics [2]. CNTs are tubular in geometry and possess a unique set of properties, including ballistic electron transportation and a huge current caring capacity, which make them of great interest for future microelectronics [2]. Indeed CNTs might have a key role in the miniaturization of Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Moving from a traditional two dimensional (2D) design (as is the case of thin films) to a 3D structure (based on a tridimensional arrangement of unidimensional structures) will result in the high reliability and sensing of the signals due to the large contribution from the bottom electrode. One way to achieve this 3D design is by using CNTs. Ferroelectrics (FE) are spontaneously polarized and can have high dielectric constants and interesting pyroelectric, piezoelectric, and electrooptic properties, being a key application of FE electronic memories. However, combining CNTs with FE functional oxides is challenging. It starts with materials compatibility, since crystallization temperature of FE and oxidation temperature of CNTs may overlap. In this case low temperature processing of FE is fundamental. Within this context in this work a systematic study on the fabrication of CNTs - FE structures using low cost low temperature methods was carried out. The FE under study are comprised of lead zirconate titanate (Pb1-xZrxTiO3, PZT), barium titanate (BaTiO3, BT) and bismuth ferrite (BiFeO3, BFO). The various aspects related to the fabrication, such as effect on thermal stability of MWCNTs, FE phase formation in presence of MWCNTs and interfaces between the CNTs/FE are addressed in this work. The ferroelectric response locally measured by Piezoresponse Force Microscopy (PFM) clearly evidenced that even at low processing temperatures FE on CNTs retain its ferroelectric nature. The work started by verifying the thermal decomposition behavior under different conditions of the multiwall CNTs (MWCNTs) used in this work. It was verified that purified MWCNTs are stable up to 420 ºC in air, as no weight loss occurs under non isothermal conditions, but morphology changes were observed for isothermal conditions at 400 ºC by Raman spectroscopy and Transmission Electron Microscopy (TEM). In oxygen-rich atmosphere MWCNTs started to oxidized at 200 ºC. However in argon-rich one and under a high heating rate MWCNTs remain stable up to 1300 ºC with a minimum sublimation. The activation energy for the decomposition of MWCNTs in air was calculated to lie between 80 and 108 kJ/mol. These results are relevant for the fabrication of MWCNTs – FE structures. Indeed we demonstrate that PZT can be deposited by sol gel at low temperatures on MWCNTs. And particularly interesting we prove that MWCNTs decrease the temperature and time for formation of PZT by ~100 ºC commensurate with a decrease in activation energy from 68±15 kJ/mol to 27±2 kJ/mol. As a consequence, monophasic PZT was obtained at 575 ºC for MWCNTs - PZT whereas for pure PZT traces of pyrochlore were still present at 650 ºC, where PZT phase formed due to homogeneous nucleation. The piezoelectric nature of MWCNTs - PZT synthesised at 500 ºC for 1 h was proved by PFM. In the continuation of this work we developed a low cost methodology of coating MWCNTs using a hybrid sol-gel / hydrothermal method. In this case the FE used as a proof of concept was BT. BT is a well-known lead free perovskite used in many microelectronic applications. However, synthesis by solid state reaction is typically performed around 1100 to 1300 ºC what jeopardizes the combination with MWCNTs. We also illustrate the ineffectiveness of conventional hydrothermal synthesis in this process due the formation of carbonates, namely BaCO3. The grown MWCNTs - BT structures are ferroelectric and exhibit an electromechanical response (15 pm/V). These results have broad implications since this strategy can also be extended to other compounds of materials with high crystallization temperatures. In addition the coverage of MWCNTs with FE can be optimized, in this case with non covalent functionalization of the tubes, namely with sodium dodecyl sulfate (SDS). MWCNTs were used as templates to grow, in this case single phase multiferroic BFO nanorods. This work shows that the use of nitric solvent results in severe damages of the MWCNTs layers that results in the early oxidation of the tubes during the annealing treatment. It was also observed that the use of nitric solvent results in the partial filling of MWCNTs with BFO due to the low surface tension (<119 mN/m) of the nitric solution. The opening of the caps and filling of the tubes occurs simultaneously during the refluxing step. Furthermore we verified that MWCNTs have a critical role in the fabrication of monophasic BFO; i.e. the oxidation of CNTs during the annealing process causes an oxygen deficient atmosphere that restrains the formation of Bi2O3 and monophasic BFO can be obtained. The morphology of the obtained BFO nano structures indicates that MWCNTs act as template to grow 1D structure of BFO. Magnetic measurements on these BFO nanostructures revealed a week ferromagnetic hysteresis loop with a coercive field of 956 Oe at 5 K. We also exploited the possible use of vertically-aligned multiwall carbon nanotubes (VA-MWCNTs) as bottom electrodes for microelectronics, for example for memory applications. As a proof of concept BiFeO3 (BFO) films were in-situ deposited on the surface of VA-MWCNTs by RF (Radio Frequency) magnetron sputtering. For in situ deposition temperature of 400 ºC and deposition time up to 2 h, BFO films cover the VA-MWCNTs and no damage occurs either in the film or MWCNTs. In spite of the macroscopic lossy polarization behaviour, the ferroelectric nature, domain structure and switching of these conformal BFO films was verified by PFM. A week ferromagnetic ordering loop was proved for BFO films on VA-MWCNTs having a coercive field of 700 Oe. Our systematic work is a significant step forward in the development of 3D memory cells; it clearly demonstrates that CNTs can be combined with FE oxides and can be used, for example, as the next 3D generation of FERAMs, not excluding however other different applications in microelectronics.
Este trabalho é sobre a combinação de óxidos ferroelétricos funcionais com nanotubos de carbono (CNTs) para aplicações na microeletrónica, como por exemplo em potenciais memórias ferroelétricas não voláteis (Non Volatile Ferroelectric Random Access Memories (NV-FeRAM)) de estrutura tridimensional (3D). A eletrónica miniaturizada é nos dias de hoje omnipresente. A necessidade de reduzir o tamanho dos componentes eletrónicos tem sido estimulada por necessidades de maior desempenho em dispositivos de menores dimensões e a custos cada vez mais baixos. Mas esta tendência de miniaturização da eletrónica desafia consideravelmente os processos de fabrico, os materiais a serem utilizados nas montagens das placas e a fiabilidade, entre outros aspetos. Dispositivos semicondutores e tecnologia de circuitos integrados, juntamente com a embalagem eletrónica associada, constituem a espinha dorsal dos sistemas eletrónicos miniaturizados de alto desempenho. No entanto, à medida que o tamanho diminui e a funcionalização aumenta, a redução das dimensões destes dipositivos é cada vez mais difícil; é bem conhecido que abaixo de um tamanho limite o desempenho do dispositivo deteriora-se. Assim, a miniaturização da eletrónica à base de silício tem limitações. É precisamente neste contexto que desde 2011 o Road Map for Semiconductor Industry (ITRS) sugere tecnologias alternativas às atualmente em uso, designadas por Mais de Moore (More than Moore); sendo uma delas com base em carbono (CNTs e grafeno) [1]. Os CNTs com o seu desempenho único e tridimensionalidade à escala nanométrica, foram considerados como elementos muito promissores para a eletrónica miniaturizada [2]. Nanotubos de carbono possuem uma geometria tubular e um conjunto único de propriedades, incluindo o transporte balístico de eletrões e uma capacidade enorme de transportar a corrente elétrica, o que os tornou de grande interesse para o futuro da microeletrónica [2]. Na verdade, os CNTs podem ter um papel fundamental na miniaturização das memórias ferroelétricas não voláteis (NV-FeRAM). A mudança de uma construção tradicional bidimensional (2D) (ou seja, a duas dimensões, como são os filmes finos) para uma construção tridimensional 3D, com base num arranjo tridimensional de estruturas unidimensionais (1D), como são as estruturas nanotubulares, resultará num desempenho melhorado com deteção de sinal elétrico optimizada, devido à grande contribuição do elétrodo inferior. Uma maneira de conseguir esta configuração 3D é usando nanotubos de carbono. Os materiais ferroelétricos (FE) são polarizados espontaneamente e possuem constantes dielétricas altas e as suas propriedades piroelétricas, piezoelétricas e eletroópticas tornam-nos materiais funcionais importantes na eletrónica, sendo uma das suas aplicações chave em memórias eletrónicas. No entanto, combinar os nanotubos de carbono com óxidos FE funcionais é um desafio. Começa logo com a compatibilidade entre os materiais e o seu processamento, já que as temperaturas de cristalização do FE e as temperaturas de oxidação dos CNTs se sobrepõem. Neste caso, o processamento a baixa temperatura dos óxidos FE é absolutamente fundamental. Dentro deste contexto, neste trabalho foi realizado um estudo sistemático sobre a fabricação e caracterização estruturas combinadas de CNTs – FE, usando métodos de baixa temperatura e de baixo custo. Os FE em estudo foram compostos de titanato zirconato de chumbo (Pb1-xZrxTiO3, PZT), titanato de bário (BaTiO3, BT) e ferrite de bismuto (BiFeO3, BFO). Os diversos aspetos relacionados com a síntese e fabricação, como efeito sobre a estabilidade térmica dos nanotubos de carbono multiparede (multiwall CNTs, MWCNTs), formação da fase FE na presença de MWCNTs e interfaces entre CNTs / FE foram abordados neste trabalho. A resposta ferroelétrica medida localmente através de microscopia de ponta de prova piezoelétrica (Piezoresponse Force Microscopy (PFM)), evidenciou claramente que, mesmo para baixas temperaturas de processamento óxidos FE sobre CNTs mantém a sua natureza ferroelétrica. O trabalho começou pela identificação do comportamento de decomposição térmica em diferentes condições dos nanotubos utilizados neste trabalho. Verificou-se que os MWCNTs purificados são estáveis até 420 ºC no ar, já que não ocorre perda de peso sob condições não isotérmicas, mas foram observadas, por espectroscopia Raman e microscopia eletrónica de transmissão (TEM), alterações na morfologia dos tubos para condições isotérmicas a 400 ºC. Em atmosfera rica em oxigénio os MWCNTs começam a oxidar-se a 200 ºC. No entanto, em atmosfera rica em árgon e sob uma taxa de aquecimento elevada os MWCNTs permanecem estáveis até 1300 ºC com uma sublimação mínima. A energia de ativação para a decomposição destes MWCNTs em ar foi calculada situar-se entre 80 e 108 kJ / mol. Estes resultados são relevantes para a fabricação de estruturas MWCNTs - FE. De facto, demonstramos que o PZT pode ser depositado por sol-gel a baixas temperaturas sobre MWCNTs. E, particularmente interessante foi provar que a presença de MWCNTs diminui a temperatura e tempo para a formação de PZT, em cerca de ~ 100 ºC comensuráveis com uma diminuição na energia de ativação de 68 ± 15 kJ / mol a 27 ± 2 kJ / mol. Como consequência, foi obtido PZT monofásico a 575 ºC para as estruturas MWCNTs – PZT, enquanto que para PZT (na ausência de MWCNTs) a presença da fase de pirocloro era ainda notória a 650 ºC e onde a fase de PZT foi formada por nucleação homogénea. A natureza piezoelétrica das estruturas de MWCNTs - PZT sintetizadas a 500 ºC por 1 h foi provada por PFM. Na continuação deste trabalho foi desenvolvida uma metodologia de baixo custo para revestimento de MWCNTs usando uma combinação entre o processamento sol – gel e o processamento hidrotermal. Neste caso o FE usado como prova de conceito foi o BT. BT é uma perovesquita sem chumbo bem conhecida e utilizada em muitas aplicações microeletrónicas. No entanto, a síntese por reação no estado sólido é normalmente realizada entre 1100 - 1300 ºC o que coloca seriamente em risco a combinação com MWCNTs. Neste âmbito, também se ilustrou claramente a ineficácia da síntese hidrotérmica convencional, devido à formação de carbonatos, nomeadamente BaCO3. As estruturas MWCNTs - BT aqui preparadas são ferroelétricas e exibem resposta electromecânica (15 pm / V). Considera-se que estes resultados têm impacto elevado, uma vez que esta estratégia também pode ser estendida a outros compostos de materiais com elevadas temperaturas de cristalização. Além disso, foi também verificado no decurso deste trabalho que a cobertura de MWCNTs com FE pode ser optimizada, neste caso com funcionalização não covalente dos tubos, ou seja, por exemplo com sodium dodecyl sulfate (SDS).
Yoo, Jaedeok. "Fabrication and microstructural control of advanced ceramic components by three dimensional printing." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/10602.
Повний текст джерелаDing, Ziqian. "Large area vacuum fabrication of organic thin-film transistors." Thesis, University of Oxford, 2014. http://ora.ox.ac.uk/objects/uuid:e7decca4-14e3-47e7-85ca-0bb14755f282.
Повний текст джерелаKyeremateng, Nana Amponsah. "Advanced materials based on titania nanotubes for the fabrication of high performance 3D li-ion microbatteries." Thesis, Aix-Marseille, 2012. http://www.theses.fr/2012AIXM4772/document.
Повний текст джерелаThe advent of modern microelectronic devices has necessitated the search for high-performance all-solid-state (rechargeable) microbatteries. So far, only lithium-based systems fulfill the voltage and energy density requirements of microbatteries. Presently, there is a need to move from 2D to 3D configurations, and also a necessity to adopt the “Li-ion” or the “rocking-chair” concept in designing these lithium-based (thin-film) microbatteries. This implies the combination of cathode materials such as LiCoO2, LiMn2O4 or LiFePO4 with the wide range of possible anode materials that can react reversibly with lithium. Among all the potential anode materials, TiO2 nanotubes possess a spectacular characteristic for designing 3D Li-ion microbatteries. Besides the self-organized nano-architecture, TiO2 is non-toxic and inexpensive, and the nanotubes have been demonstrated to exhibit very good capacity retention particularly at moderate kinetic rates. The use of TiO2 as anode provides cells with low self-discharge and eliminates the risk of overcharging due to its higher operating voltage (ca. 1.72 V vs. Li+/Li). Moreover, their overall performance can be improved. Hence, TiO2 nanotubes and their derivatives were synthesized and characterized, and their electrochemical behaviour versus lithium was evaluated in lithium test cells. As a first step towards the fabrication of a 3D microbattery based on TiO2 nanotubes, electrodeposition of polymer electrolytes into the synthesized TiO2 nanotubes was also studied; the inter-phase morphology and the electrochemical behaviour of the resulting material were studied
Liu, Kewei. "FABRICATION OF STRUCTURED POLYMER AND NANOMATERIALS FOR ADVANCED ENERGY STORAGE AND CONVERSION." University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1542022285390711.
Повний текст джерелаKhan, Mughees Mahmood. "Fabrication and testing of nano-optical structures for advanced photonics and quantum information processing applications." [College Station, Tex. : Texas A&M University, 2006. http://hdl.handle.net/1969.1/ETD-TAMU-1165.
Повний текст джерелаO'Neill, Laura. "Nanostructured thin film pseudocapacitive electrodes for enhanced electrochemical energy storage." Thesis, University of Oxford, 2014. http://ora.ox.ac.uk/objects/uuid:8cfa1203-4162-4b85-9df4-ade8023c6489.
Повний текст джерелаMacRae, John Douglas. "Development and verification of a resin film infusion/resin transfer molding simulation model for fabrication of advanced textile composites." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-05092009-040737/.
Повний текст джерелаКниги з теми "Advanced materials fabrication"
Gray, Stephen, Toshinori Tsuru, Yoram Cohen, and Woei-Jye Lau, eds. Advanced Materials for Membrane Fabrication and Modification. Boca Raton : Taylor & Francis a CRC title, part of the Taylor & Francis imprint, a member of the Taylor & Francis Group, the academic division of T&F Informa, plc, 2018.: CRC Press, 2018. http://dx.doi.org/10.1201/9781315184357.
Повний текст джерелаNational Research Council (U.S.). Committee on Advanced Materials and Fabrication Methods for Microelectromechanical Systems. Microelectromechanical systems: Advanced materials and fabrication methods. Washington, DC: National Academy Press, 1997.
Знайти повний текст джерелаDorworth, Louis C. Essentials of advanced composite fabrication and repair. Newcastle, Wash: Aviation Supplies & Academic, 2012.
Знайти повний текст джерелаL, Gardiner Ginger, and Mellema Greg M, eds. Essentials of advanced composite fabrication and repair. Newcastle, Wash: Aviation Supplies & Academic, 2010.
Знайти повний текст джерелаDorworth, Louis C. Essentials of advanced composite fabrication and repair. Newcastle, Wash: Aviation Supplies & Academic, 2010.
Знайти повний текст джерелаSingh, Subhash, and Dinesh Kumar. Fabrication and Machining of Advanced Materials and Composites. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327370.
Повний текст джерелаSih, George C., A. Carpinteri, and G. Surace, eds. Advanced Technology for Design and Fabrication of Composite Materials and Structures. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-015-8563-7.
Повний текст джерелаInternational Symposium on Processing and Fabrication of Advanced Materials (14th 2005 Pittsburgh, Pa.). Processing and Fabrication of Advanced Materials XIV: With Frontiers in Materials Science 2005 : Innovative Materials & Manufacturing Techniques. Edited by Srivatsan T. S and Symposium on Frontiers in Materials Science (2005 : Pittsburgh, Pa.). Pittsburgh, PA: Materials Science & Technology 2005, 2005.
Знайти повний текст джерелаConference on Processing, Fabrication, and Application of Advanced Composites (1993 Long Beach, Calif.). Processing, fabrication, and application of advanced composites: Proceedings of the Conference on Processing, Fabrication, and Application of Advanced Composites, August 9-11, 1993, Long Beach, California. Materials Park, OH: ASM International, 1993.
Знайти повний текст джерелаInternational Symposium on Processing and Fabrication of Advanced Materials (20th 2011 Hong Kong, China). Processing and fabrication of advanced materials: Selected, peer reviewed papers from 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XX), December 15-18, 2011, Hong Kong. Durnten-Zuerich, Switzerland: Trans Tech, 2012.
Знайти повний текст джерелаЧастини книг з теми "Advanced materials fabrication"
Johnson, Asha P., H. V. Gangadharappa, and K. Pramod. "Graphene Nanoribbons, Fabrication, Properties, and Biomedical Applications." In Advanced Nanocarbon Materials, 73–108. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003110781-5.
Повний текст джерелаShi, Minjie, Xuefeng Song, Cheng Yang, Yuyu Tian, Kai Tao, Jijin Xu, Peng Zhang, and Lian Gao. "Graphene-Ionic Liquids Supercapacitors: Design, Fabrication and Applications." In Advanced Battery Materials, 451–76. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2019. http://dx.doi.org/10.1002/9781119407713.ch9.
Повний текст джерелаWang, Xiaoying, Guocheng Han, Zuguang Shen, and Runcang Sun. "Fabrication, Property, and Application of Lignin-Based Nanocomposites." In Advanced Structured Materials, 73–99. New Delhi: Springer India, 2015. http://dx.doi.org/10.1007/978-81-322-2473-0_3.
Повний текст джерелаZhang, Yun, and Zhi Jing Feng. "Processing Flow of Optical Fabrication for Correcting Lenses." In Advanced Materials Research, 117–24. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-461-8.117.
Повний текст джерелаKobayashi, Yoshihiro, Makoto Kobashi, and Naoyuki Kanetake. "Fabrication of Oxide Ceramics Composite by Reactive Infiltration Process." In Advanced Materials Research, 321–24. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-463-4.321.
Повний текст джерелаAbdelaal, Osama A. M., and Saied M. H. Darwish. "Review of Rapid Prototyping Techniques for Tissue Engineering Scaffolds Fabrication." In Advanced Structured Materials, 33–54. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-31470-4_3.
Повний текст джерелаWong, William S. Y., and Antonio Tricoli. "Multiscale Engineering and Scalable Fabrication of Super(de)wetting Coatings." In Advanced Coating Materials, 393–480. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2018. http://dx.doi.org/10.1002/9781119407652.ch13.
Повний текст джерелаChoi, Dae Ho, Kai Kamada, Naoya Enomoto, Junichi Hojo, and Soo Wohn Lee. "Fabrication of Porous Alumina Ceramics by Spark Plasma Sintering Method." In Advanced Materials Research, 279–82. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-463-4.279.
Повний текст джерелаMehara, Kazuhito, Makoto Kobashi, and Naoyuki Kanetake. "Fabrication of Magnesium Foam by Precursor Method Using Machined Chips." In Advanced Materials Research, 905–8. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-463-4.905.
Повний текст джерелаOkieimen, F. E., and I. O. Bakare. "Rubber Seed Oil-Based Polyurethane Composites, Fabrication and Properties Evaluation." In Advanced Materials Research, 233–39. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-450-2.233.
Повний текст джерелаТези доповідей конференцій з теми "Advanced materials fabrication"
Otani, Yukitosho, and Toshitaka Wakayama. "Birefringence Dispersion Measurement for Advanced Display Materials." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2006. http://dx.doi.org/10.1364/oft.2006.oftuc5.
Повний текст джерелаDenney, P. E. "Laser processing for advanced materials fabrication." In ICALEO® ‘89: Proceedings of the Materials Processing Conference. Laser Institute of America, 1989. http://dx.doi.org/10.2351/1.5058337.
Повний текст джерелаVogt, Christian, Markus Schinhaerl, Florian Schneider, Peter Sperber, and Rolf Rascher. "Investigations on Grinding Tools for Silicon Carbide Based Advanced Materials." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2010. http://dx.doi.org/10.1364/oft.2010.owd2.
Повний текст джерелаCooke, Arthur V., Natarajan Shankar, Lorianne Jones, Dave Ewaldz, Leonard S. Haynes, David R. Martinez, Ben K. Wada, and Carl H. Zweben. "Advanced reconfigurable machine for flexible fabrication." In Smart Structures & Materials '95, edited by C. Robert Crowe and Gary L. Anderson. SPIE, 1995. http://dx.doi.org/10.1117/12.209325.
Повний текст джерелаSugino, Naoto, Makoto Hanabata, and Satoshi Takei. "Organic-inorganic hybrid resist materials in advanced lithography." In Nanoengineering: Fabrication, Properties, Optics, and Devices XIV, edited by Eva M. Campo, Elizabeth A. Dobisz, and Louay A. Eldada. SPIE, 2017. http://dx.doi.org/10.1117/12.2275105.
Повний текст джерелаCheng, W., J. Ma, and S. M. Wong. "ELECTROPHORETIC DEPOSITION OF ADVANCED CERAMICS." In Processing and Fabrication of Advanced Materials VIII. WORLD SCIENTIFIC, 2001. http://dx.doi.org/10.1142/9789812811431_0061.
Повний текст джерелаPoon, Ryan, and Igor Zhitomirsky. "Fabrication of Advanced Electrode Materials for Supercapacitors." In International Conference of Energy Harvesting, Storage, and Transfer. Avestia Publishing, 2017. http://dx.doi.org/10.11159/ehst17.103.
Повний текст джерелаWang, W. M., Z. Y. Fu, and H. Wang. "Fabrication and Microstructure of TiB2-BN Composites Materials." In Processing and Fabrication of Advanced Materials VIII. WORLD SCIENTIFIC, 2001. http://dx.doi.org/10.1142/9789812811431_0064.
Повний текст джерелаLow, I. M., J. Fulton, P. Cheang, and K. A. Khor. "DESIGNING NEW DENTAL MATERIALS THROUGH MIMICKING HUMAN TEETH." In Processing and Fabrication of Advanced Materials VIII. WORLD SCIENTIFIC, 2001. http://dx.doi.org/10.1142/9789812811431_0043.
Повний текст джерелаArgyropoulos, Christos, and Boyuan Jin. "Nonlinear graphene metasurfaces with advanced electromagnetic functionalities." In Plasmonics: Design, Materials, Fabrication, Characterization, and Applications XVI, edited by Takuo Tanaka and Din Ping Tsai. SPIE, 2018. http://dx.doi.org/10.1117/12.2319878.
Повний текст джерелаЗвіти організацій з теми "Advanced materials fabrication"
Author, Not Given. Improved Fabrication Methods and Materials for Advanced Photovoltaic and Semiconductor Devices. Office of Scientific and Technical Information (OSTI), June 2011. http://dx.doi.org/10.2172/1019282.
Повний текст джерелаMalhotra, V. M., and M. A. Wright. Design and fabrication of advanced materials from Illinois coal wastes. Quarterly report, 1 December 1994--28 February 1995. Office of Scientific and Technical Information (OSTI), December 1995. http://dx.doi.org/10.2172/208321.
Повний текст джерелаMalhotra, V. M., and M. A. Wright. Design and fabrication of advanced materials from Illinois coal wastes. Quarterly report, 1 March 1995--31 May 1995. Office of Scientific and Technical Information (OSTI), December 1995. http://dx.doi.org/10.2172/208374.
Повний текст джерелаMalhotra, V. M., and M. A. Wright. Design and fabrication of advanced materials from Illinois coal wastes. [Quarterly] technical report, September 1--November 30, 1994. Office of Scientific and Technical Information (OSTI), December 1994. http://dx.doi.org/10.2172/26604.
Повний текст джерелаLi, Jianzhi. Instrumentation Acquisition for Research and Education in Additive Manufacturing and Advanced Material Fabrication. Fort Belvoir, VA: Defense Technical Information Center, July 2015. http://dx.doi.org/10.21236/ad1001102.
Повний текст джерелаWampler, William R., and Stuart B. Van Deusen. Fabrication and Characterization of Samples for a Material Migration Experiment on the Experimental Advanced Superconducting Tokamak (EAST). Office of Scientific and Technical Information (OSTI), December 2015. http://dx.doi.org/10.2172/1234816.
Повний текст джерела