Добірка наукової літератури з теми "Additive Manufacturing (AM) techniques"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Additive Manufacturing (AM) techniques".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Additive Manufacturing (AM) techniques"
Long, Jingjunjiao, Ashveen Nand, and Sudip Ray. "Application of Spectroscopy in Additive Manufacturing." Materials 14, no. 1 (January 4, 2021): 203. http://dx.doi.org/10.3390/ma14010203.
Повний текст джерелаCosta, José, Elsa Sequeiros, Maria Teresa Vieira, and Manuel Vieira. "Additive Manufacturing." U.Porto Journal of Engineering 7, no. 3 (April 30, 2021): 53–69. http://dx.doi.org/10.24840/2183-6493_007.003_0005.
Повний текст джерелаGrierson, Dean, Allan E. W. Rennie, and Stephen D. Quayle. "Machine Learning for Additive Manufacturing." Encyclopedia 1, no. 3 (July 19, 2021): 576–88. http://dx.doi.org/10.3390/encyclopedia1030048.
Повний текст джерелаKim, Hoejin, Yirong Lin, and Tzu-Liang Bill Tseng. "A review on quality control in additive manufacturing." Rapid Prototyping Journal 24, no. 3 (April 9, 2018): 645–69. http://dx.doi.org/10.1108/rpj-03-2017-0048.
Повний текст джерелаVaezi, Mohammad, Philipp Drescher, and Hermann Seitz. "Beamless Metal Additive Manufacturing." Materials 13, no. 4 (February 19, 2020): 922. http://dx.doi.org/10.3390/ma13040922.
Повний текст джерелаKlüver, Enno, Marit Baltzer, Axel Langer, and Michael Meyer. "Additive Manufacturing with Thermoplastic Collagen." Polymers 14, no. 5 (February 28, 2022): 974. http://dx.doi.org/10.3390/polym14050974.
Повний текст джерелаAversa, Alberta, and Paolo Fino. "Special Issue on Materials Development by Additive Manufacturing Techniques." Applied Sciences 10, no. 15 (July 25, 2020): 5119. http://dx.doi.org/10.3390/app10155119.
Повний текст джерелаXiong, Wei. "Additive manufacturing as a tool for high-throughput experimentation." Journal of Materials Informatics 2, no. 3 (2022): 12. http://dx.doi.org/10.20517/jmi.2022.19.
Повний текст джерелаZhai, Xiaoya, Liuchao Jin, and Jingchao Jiang. "A survey of additive manufacturing reviews." Materials Science in Additive Manufacturing 1, no. 4 (November 16, 2022): 21. http://dx.doi.org/10.18063/msam.v1i4.21.
Повний текст джерелаNaseer, Muhammad Usman, Ants Kallaste, Bilal Asad, Toomas Vaimann, and Anton Rassõlkin. "A Review on Additive Manufacturing Possibilities for Electrical Machines." Energies 14, no. 7 (March 31, 2021): 1940. http://dx.doi.org/10.3390/en14071940.
Повний текст джерелаДисертації з теми "Additive Manufacturing (AM) techniques"
Schunemann, Esteban. "Paste deposition modelling : deconstructing the additive manufacturing process : development of novel multi-material tools and techniques for craft practitioners." Thesis, Brunel University, 2015. http://bura.brunel.ac.uk/handle/2438/13803.
Повний текст джерелаHasting, William. "Geometric Effects of Free-Floating Technique on Alloy 718 Parts Produced via Laser-Powder Bed Fusion." University of Cincinnati / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1613751580039925.
Повний текст джерелаWhip, Bo Ryan. "Effect of Process Parameters on the Surface Roughness and Mechanical Performance of Additively Manufactured Alloy 718." Wright State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=wright1526993831680976.
Повний текст джерелаMelpal, Gopalakrishna Ranjan. "Conformal Lattice Structures in Additive Manufacturing (AM)." University of Cincinnati / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1535382325233769.
Повний текст джерелаChandran, Ramya. "Optimization of Support Structures in Additive Manufacturing (AM) Processes." University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1479819006942462.
Повний текст джерелаPaul, Ratnadeep. "Modeling and Optimization of Powder Based Additive Manufacturing (AM) Processes." University of Cincinnati / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1378113813.
Повний текст джерелаAllavarapu, Santosh. "A New Additive Manufacturing (AM) File Format Using Bezier Patches." University of Cincinnati / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1385114646.
Повний текст джерелаGhazizadeh, Ali, and Suraj Lakshminarasimhaiah. "Additive manufacturing and its impacts on manufacturing industries in the future concerning the sustainability of AM." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-56058.
Повний текст джерелаJeunehomme, Eric J. S. "Design of low cost biomimetic flexible robots using additive manufacturing techniques." Thesis, Massachusetts Institute of Technology, 2019. https://hdl.handle.net/1721.1/122313.
Повний текст джерелаThesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2019
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 109-112).
In this thesis, I designed and fabricated robots leveraging additive manufacturing. This had two overarching purpose. One to make a testing apparatus that would allow the measurements of the influence of a flexible flapping foil onto a subsequent, in-line, foil with the optic of researching optimized propulsion solutions for under water vehicles. The second was to show that filament deposition modeling has advanced enough to produce bio-mimetic flexible robots of academic relevance that would allow, for a low price, the making of a number of experimental setup with specific measurements in mind. In order to reach those goals, two versions of a bio-mimetic archer fish of the genus Toxotes were modeled using various software. The models were modified to accept actuator assemblies and interface to the electronics and built using a modified hobby grade 3D printer.
by Eric J.S. Jeunehomme.
S.M. in Naval Architecture and Marine Engineering
S.M.
S.M.inNavalArchitectureandMarineEngineering Massachusetts Institute of Technology, Department of Mechanical Engineering
S.M. Massachusetts Institute of Technology, Department of Mechanical Engineering
Sauter, Barrett. "Ultra-light weight design through additive manufacturing." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-45160.
Повний текст джерелаКниги з теми "Additive Manufacturing (AM) techniques"
Morar, Dominik. Additive Manufacturing (AM). Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-37153-1.
Повний текст джерелаMaterials Development by Additive Manufacturing Techniques. MDPI, 2021. http://dx.doi.org/10.3390/books978-3-03943-033-8.
Повний текст джерелаAdditive Manufacturing (AM) of Metallic Alloys. MDPI, 2020. http://dx.doi.org/10.3390/books978-3-03943-141-0.
Повний текст джерелаManogharan, Guha. Hybrid Additive Manufacturing: Techniques, Applications and Benefits. Elsevier Science & Technology Books, 2020.
Знайти повний текст джерелаBai, Jiaming, Wei Zhu, and Kun Zhou. Polymer Additive Manufacturing: Materials,Techniques and Applications. Wiley & Sons, Incorporated, John, 2022.
Знайти повний текст джерелаManogharan, Guha. Hybrid Additive Manufacturing: Techniques, Applications and Benefits. Elsevier Science & Technology, 2020.
Знайти повний текст джерелаPandey, Pulak Mohan, Nishant K. Singh, and Yashvir Singh. Additive Manufacturing: Advanced Materials and Design Techniques. Taylor & Francis Group, 2023.
Знайти повний текст джерелаBai, Jiaming, Wei Zhu, and Kun Zhou. Polymer Additive Manufacturing: Materials,Techniques and Applications. Wiley & Sons, Incorporated, John, 2022.
Знайти повний текст джерелаBai, Jiaming, Wei Zhu, and Kun Zhou. Polymer Additive Manufacturing: Materials,Techniques and Applications. Wiley & Sons, Incorporated, John, 2022.
Знайти повний текст джерелаPandey, Pulak Mohan, Nishant K. Singh, and Yashvir Singh. Additive Manufacturing: Advanced Materials and Design Techniques. Taylor & Francis Group, 2023.
Знайти повний текст джерелаЧастини книг з теми "Additive Manufacturing (AM) techniques"
Lele, Ajey. "Additive Manufacturing (AM)." In Disruptive Technologies for the Militaries and Security, 101–9. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-3384-2_5.
Повний текст джерелаMorar, Dominik. "Der AM-Produktentstehungsprozess in der Praxis – Methodik und Ergebnisse." In Additive Manufacturing (AM), 85–160. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-37153-1_3.
Повний текст джерелаMorar, Dominik. "Einführung." In Additive Manufacturing (AM), 1–22. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-37153-1_1.
Повний текст джерелаMorar, Dominik. "Die Informationsversorgung im Kontext von Additive Manufacturing." In Additive Manufacturing (AM), 23–84. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-37153-1_2.
Повний текст джерелаMorar, Dominik. "Fazit und Diskussion." In Additive Manufacturing (AM), 257–64. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-37153-1_6.
Повний текст джерелаMorar, Dominik. "Evaluation des Fachkonzepts." In Additive Manufacturing (AM), 229–56. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-37153-1_5.
Повний текст джерелаMorar, Dominik. "Entwurf eines Informationsversorgungskonzepts für den AM-Produktentstehungsprozess." In Additive Manufacturing (AM), 161–228. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-37153-1_4.
Повний текст джерелаSharma, Sumit Kumar, Ranjan Mandal, and Amarish Kumar Shukla. "Processing techniques, principles, and applications of additive manufacturing." In Additive Manufacturing, 187–202. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003258391-11.
Повний текст джерелаGibson, Ian, David Rosen, Brent Stucker, and Mahyar Khorasani. "Industrial Drivers for AM Adoption." In Additive Manufacturing Technologies, 623–47. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-56127-7_21.
Повний текст джерелаHerrera Ramirez, Jose Martin, Raul Perez Bustamante, Cesar Augusto Isaza Merino, and Ana Maria Arizmendi Morquecho. "Additive Manufacturing." In Unconventional Techniques for the Production of Light Alloys and Composites, 89–102. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-48122-3_6.
Повний текст джерелаТези доповідей конференцій з теми "Additive Manufacturing (AM) techniques"
Cleary, William, Clinton Armstrong, David Huegel, and Thomas Pomorski. "Additive Manufacturing at Westinghouse." In 2021 28th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/icone28-68543.
Повний текст джерелаMcNelly, Brendan P., Richard L. Hooks, William R. Setzler, and Craig S. Hughes. "Additive Manufacturing of Pressure Vessels (With Plating)." In ASME 2017 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/pvp2017-65888.
Повний текст джерелаLee, Pil-Ho, Haseung Chung, Sang Won Lee, Jeongkon Yoo, and Jeonghan Ko. "Review: Dimensional Accuracy in Additive Manufacturing Processes." In ASME 2014 International Manufacturing Science and Engineering Conference collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/msec2014-4037.
Повний текст джерелаKianian, Babak, and Tobias C. Larsson. "Additive Manufacturing Technology Potential: A Cleaner Manufacturing Alternative." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-46075.
Повний текст джерелаWong, Vivian Wen Hui, Max Ferguson, Kincho H. Law, Yung-Tsun Tina Lee, and Paul Witherell. "Segmentation of Additive Manufacturing Defects Using U-Net." In ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/detc2021-68885.
Повний текст джерелаMansfield, Brooke, Sabrina Torres, Tianyu Yu, and Dazhong Wu. "A Review on Additive Manufacturing of Ceramics." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2886.
Повний текст джерелаDOJAN, CARTER, MORTEZA ZIAEE, and MOSTAFA YOURDKHANI. "RAPID AND SCALABLE ADDITIVE MANUFACTURING OF THERMOSET POLYMER COMPOSITES." In Proceedings for the American Society for Composites-Thirty Seventh Technical Conference. Destech Publications, Inc., 2022. http://dx.doi.org/10.12783/asc37/36457.
Повний текст джерелаZhang, Binbin, Prakhar Jaiswal, Rahul Rai, and Saigopal Nelaturi. "Additive Manufacturing of Functionally Graded Objects: A Review." In ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/detc2016-60320.
Повний текст джерелаGhiasian, Seyedeh Elaheh, Prakhar Jaiswal, Rahul Rai, and Kemper Lewis. "From Conventional to Additive Manufacturing: Determining Component Fabrication Feasibility." In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/detc2018-86238.
Повний текст джерелаLi, Zongchen, Andre Gut, Iurii Burda, Silvain Michel, Dejan Romancuk, and Christian Affolter. "The Role of an Individual Lack-of-Fusion Defect in the Fatigue Performance of Additive Manufactured Ti-6Al-4V Part." In 2022 International Additive Manufacturing Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/iam2022-94120.
Повний текст джерелаЗвіти організацій з теми "Additive Manufacturing (AM) techniques"
MURPH, SIMONA. MATERIAL DEVELOPMENTS FOR 3D/4D ADDITIVE MANUFACTURING (AM) TECHNOLOGIES. Office of Scientific and Technical Information (OSTI), October 2020. http://dx.doi.org/10.2172/1676417.
Повний текст джерелаSESSIONS, HENRY. MATERIAL DEVELOPMENTS FOR 3D/4D ADDITIVE MANUFACTURING (AM) TECHNOLOGIES. Office of Scientific and Technical Information (OSTI), October 2021. http://dx.doi.org/10.2172/1838344.
Повний текст джерелаSlattery, Kevin. Unsettled Aspects of Insourcing and Outsourcing Additive Manufacturing. SAE International, October 2021. http://dx.doi.org/10.4271/epr2021023.
Повний текст джерелаSlattery, Kevin T. Unsettled Aspects of the Digital Thread in Additive Manufacturing. SAE International, November 2021. http://dx.doi.org/10.4271/epr2021026.
Повний текст джерелаElmer, J., and G. Gibbs. Wire Arc Additive Manufacturing Final Report for the Wire-Based AM Focused Exchange. Office of Scientific and Technical Information (OSTI), November 2018. http://dx.doi.org/10.2172/1809158.
Повний текст джерелаSlattery, Kevin, and Kirk A. Rogers. Internal Boundaries of Metal Additive Manufacturing: Future Process Selection. SAE International, March 2022. http://dx.doi.org/10.4271/epr2022006.
Повний текст джерелаBabu, Sudarsanam Suresh, Lonnie J. Love, William H. Peter, and Ryan Dehoff. Workshop Report on Additive Manufacturing for Large-Scale Metal Components - Development and Deployment of Metal Big-Area-Additive-Manufacturing (Large-Scale Metals AM) System. Office of Scientific and Technical Information (OSTI), May 2016. http://dx.doi.org/10.2172/1325459.
Повний текст джерелаTodorov, Evgueni, Roger Spencer, Sean Gleeson, Madhi Jamshidinia, and Shawn M. Kelly. America Makes: National Additive Manufacturing Innovation Institute (NAMII) Project 1: Nondestructive Evaluation (NDE) of Complex Metallic Additive Manufactured (AM) Structures. Fort Belvoir, VA: Defense Technical Information Center, June 2014. http://dx.doi.org/10.21236/ada612775.
Повний текст джерелаBernardin, John. E-1 Additive Manufacturing (AM) Existing Infrastructure and Recent Developments in Materials, Processes, and Capabilities. Office of Scientific and Technical Information (OSTI), January 2022. http://dx.doi.org/10.2172/1839346.
Повний текст джерелаSlattery, Kevin, and Eliana Fu. Unsettled Issues in Additive Manufacturing and Improved Sustainability in the Mobility Industry. SAE International, July 2021. http://dx.doi.org/10.4271/epr2021015.
Повний текст джерела