Добірка наукової літератури з теми "Наукові матеріали"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Наукові матеріали".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Наукові матеріали"
Palasyuk, H. P., та B. M. Palasyuk. "МЕДСЕСТРИНСЬКІ НАУКОВІ ДОСЛІДЖЕННЯ В АВСТРІЇ". Медична освіта, № 2 (20 серпня 2019): 178–83. http://dx.doi.org/10.11603/me.2414-5998.2019.2.10361.
Повний текст джерелаБиков, Валерій Юхимович, Олег Михайлович Спірін, Андрій Олександрович Білощицький, Олександр Юрійович Кучанський, Олександр Васильович Діхтяренко та Олександр Вадимович Новицький. "ВІДКРИТІ ЦИФРОВІ СИСТЕМИ В ОЦІНЮВАННІ РЕЗУЛЬТАТІВ НАУКОВО-ПЕДАГОГІЧНИХ ДОСЛІДЖЕНЬ". Information Technologies and Learning Tools 75, № 1 (24 лютого 2020): 294–315. http://dx.doi.org/10.33407/itlt.v75i1.3589.
Повний текст джерелаГубеладзе, Ірина Гурамівна, Анна Володимирівна Яцишин та Аліса Сергіївна Сухіх. "РОЛЬ ЦИФРОВИХ ТЕХНОЛОГІЙ У ФОРМУВАННІ ПОЧУТТЯ ВЛАСНОСТІ МОЛОДОГО ВЧЕНОГО". Information Technologies and Learning Tools 85, № 5 (1 листопада 2021): 304–22. http://dx.doi.org/10.33407/itlt.v85i5.4533.
Повний текст джерелаМарущак, М. І., Л. П. Мазур, І. Я. Криницька та І. М. Кліщ. "ОСОБЛИВОСТІ ПІДГОТОВКИ ЗДОБУВАЧІВ ТРЕТЬОГО ОСВІТНЬО-НАУКОВОГО РІВНЯ ЗА СПЕЦІАЛЬНІСТЮ 223 «МЕДСЕСТРИНСТВО»". Вісник медичних і біологічних досліджень, № 3 (8 грудня 2021): 54–57. http://dx.doi.org/10.11603/bmbr.2706-6290.2021.3.12570.
Повний текст джерелаОлицька, Олена. "ІСТОРІОГРАФІЯ ДОСЛІДЖЕННЯ ЖИТТЄВОГО ТА ПРОФЕСІЙНОГО ШЛЯХУ М. М. ДАРМАНСЬКОГО". Педагогічні науки: теорія, історія, інноваційні технології, № 10(104) (28 грудня 2020): 500–513. http://dx.doi.org/10.24139/2312-5993/2020.10/500-513.
Повний текст джерелаГрузєва, Т. С. "РОЗВИТОК КИЇВСЬКОЇ СОЦІАЛЬНО-ГІГІЄНІЧНОЇ НАУКОВОЇ ШКОЛИ У ХХ СТОЛІТТІ (1920–1990 рр.)". Вісник соціальної гігієни та організації охорони здоров'я України, № 3 (23 грудня 2021): 64–70. http://dx.doi.org/10.11603/1681-2786.2021.3.12630.
Повний текст джерелаОЛИЦЬКА, Олена. "М.М.ДАРМАНСЬКИЙ – ОСВІТЯНИН, НАУКОВЕЦЬ, УПРАВЛІНЕЦЬ: ШТРИХИ ДО ПРОФЕСІЙНОГО ПОРТРЕТА". Збірник наукових праць Національної академії Державної прикордонної служби України. Серія: педагогічні науки 21, № 2 (12 вересня 2020): 134–46. http://dx.doi.org/10.32453/pedzbirnyk.v21i2.425.
Повний текст джерелаГОЛЯ, Г. М. "ВІТЧИЗНЯНА ІСТОРІОГРАФІЯ ПРОБЛЕМИ УЧИТЕЛЬСЬКИХ КАДРІВ ЦЕРКОВНОПАРАФІЯЛЬНИХ ШКІЛ". АКАДЕМІЧНІ СТУДІЇ. СЕРІЯ «ПЕДАГОГІКА» 2, № 4 (19 квітня 2022): 106–13. http://dx.doi.org/10.52726/as.pedagogy/2021.4.2.16.
Повний текст джерелаРОЗМАН, Ірина. "АВТОБІОГРАФІЧНІ МАТЕРІАЛИ: РЕТРОСПЕКТИВНА ХАРАКТЕРИСТИКА". Збірник наукових праць Національної академії Державної прикордонної служби України. Серія: педагогічні науки 21, № 2 (12 вересня 2020): 215–29. http://dx.doi.org/10.32453/pedzbirnyk.v21i2.430.
Повний текст джерелаZykova, N. P., Z. M. Nebesna, S. B. Kramar та S. O. Lytvynyuk. "ВПЛИВ ЕКЗО- ТА ЕНДОГЕННИХ ЧИННИКІВ НА МОРФОЛОГІЮ ПІДШЛУНКОВОЇ ЗАЛОЗИ". Вісник медичних і біологічних досліджень, № 4 (25 лютого 2021): 143–49. http://dx.doi.org/10.11603/bmbr.2706-6290.2020.4.11828.
Повний текст джерелаДисертації з теми "Наукові матеріали"
Антонюк, Андрій Миколайович. "Комп’ютерні засоби організації та видання збірників матеріалів наукової конференції". Bachelor's thesis, КПІ ім. Ігоря Сікорського, 2021. https://ela.kpi.ua/handle/123456789/44176.
Повний текст джерелаIn the thesis the problem of data storage of scientific conferences of the faculty is investigated and solved. The aim of the work is to analyze the existing methods of organization, secure storage and management of large amounts of data, and the implementation of a system that allows you to securely store, search and transmit information. In the course of work the problems and features of storage and structuring of the information were defined. Based on these materials, certain criteria were put forward for the developed application. The result of the thesis is a mobile application that allows you to save scientific materials and quickly search for them. The application can be used not only to work with materials of scientific conferences, but also for course, diploma, master's theses.
В дипломной работе исследованы и решена проблема хранения данных научных конференций факультета. Целью работы является анализ существующих способов организации, безопасного хранения и управления большими объемами данных, и реализация системы, позволяющей безопасно хранить, искать и передавать информацию. В процессе работы было определено проблематику и особенности хранения и структурирования информации. На основе этих материалов были выдвинуты определенные критерии к разрабатываемого приложения. Результатом работы является мобильное приложение, который позволяет сохранять научные материалы и быстро их искать. Приложение может быть использовано не только для работы с материалами научных конференций, но и для курсовых, дипломных, магистерских работ.
Резнік, Світлана Миколаївна. "Проблема оновлення змісту освіти як відображення кризи вищої освіти". Thesis, ФОП Брові О. В, 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/23104.
Повний текст джерелаЄрмоленко, Ірина Юріївна. "Наукові основи електрохімічної технології покриттів тернарними сплавами заліза з тугоплавкими металами". Thesis, НТУ "ХПІ", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/37459.
Повний текст джерелаDissertation for the Degree of the Doctor of Engineering Sciences in the Specialty of 05.17.03 – Technical Electrochemistry. – National Technical University "Kharkіv Polytechnic Institute", Kharkіv, 2018. This doctoral thesis is devoted to the development of scientific basics for electrochemical technologies used for the application of coatings consisting of ternary iron and cobalt alloys combined with molybdenum and tungsten of improved functionality. The hypothesis as for the competitive reduction of iron ternary metals with refractory components preconditioned by the mutual interaction of thermal-&-dynamic and crystal-&-chemical characteristics of the alloy-forming metals and the kinetic parameters of cathode process and it was proved experimentally. The kinetic regularities of the co-reduction in Fe³⁺ ‒ MoO₄²⁻ ‒ WO₄²⁻ ‒ Cit³⁻, Fe³⁺ ‒ Со²+ ‒ WO₄²⁻ (MoO₄²⁻) ‒ Cit³⁻ systems have been defined and the mechanism of deposition of ternary Fe-Mo-W, Fe-Co-W (Mo) alloys has been substantiated. The influence of composition of electrolytes and modes of electrolysis on elemental, phase composition and surface morphology of the obtained coatings has been deter-mined. The possibility of controlling the composition and morphology of multicomponent coatings on the basis of iron and cobalt by varying the composition of the electrolyte (the ratio of component concentrations, the ratio of ligand and complexing agent), and by used of galvanostatic and pulsed electrolysis regimes with a ranging of current density 2.5 ‒ 6.5 A/dm², and durations pulse/pause 5 ‒ 10 / 5 ‒ 20 ms, has been proved. The electrolytes and the deposition modes were developed that provide the deposition of Fe-Co-W coatings with the Co content of 32 to 47 аt. %, and W of 5 to 13 аt. %, and Fe-Mo-W coatings with the tungsten content of 5 to 11 at. %, and the molybdenum contents of 26 to 32 at. %, and the Fe-Сo-Мо coatings with the Co content ranging from 26 to 48 at. %, and Mo content ranging from 15 to 31 at. %, and the current efficiency ranging from 58 to 82 %. The variation schemes of electrochemical processes were suggested and these allow for the deposition of Fe-Mo-W and Fe-Co-W(Мо) coatings depending on their practical application. The perspective directions of the application of the obtained materials according to the results of experimental researches and tests of functional properties in model environments and technological conditions are determined.
Єрмоленко, Ірина Юріївна. "Наукові основи електрохімічної технології покриттів тернарними сплавами заліза з тугоплавкими металами". Thesis, НТУ "ХПІ", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/37455.
Повний текст джерелаDissertation for the Degree of the Doctor of Engineering Sciences in the Specialty of 05.17.03 – Technical Electrochemistry. – National Technical University "Kharkіv Polytechnic Institute", Kharkіv, 2018. This doctoral thesis is devoted to the development of scientific basics for electrochemical technologies used for the application of coatings consisting of ternary iron and cobalt alloys combined with molybdenum and tungsten of improved functionality. The hypothesis as for the competitive reduction of iron ternary metals with refractory components preconditioned by the mutual interaction of thermal-&-dynamic and crystal-&-chemical characteristics of the alloy-forming metals and the kinetic parameters of cathode process and it was proved experimentally. The kinetic regularities of the co-reduction in Fe³⁺ ‒ MoO₄²⁻ ‒ WO₄²⁻ ‒ Cit³⁻, Fe³⁺ ‒ Со²+ ‒ WO₄²⁻ (MoO₄²⁻) ‒ Cit³⁻ systems have been defined and the mechanism of deposition of ternary Fe-Mo-W, Fe-Co-W (Mo) alloys has been substantiated. The influence of composition of electrolytes and modes of electrolysis on elemental, phase composition and surface morphology of the obtained coatings has been deter-mined. The possibility of controlling the composition and morphology of multicomponent coatings on the basis of iron and cobalt by varying the composition of the electrolyte (the ratio of component concentrations, the ratio of ligand and complexing agent), and by used of galvanostatic and pulsed electrolysis regimes with a ranging of current density 2.5 ‒ 6.5 A/dm², and durations pulse/pause 5 ‒ 10 / 5 ‒ 20 ms, has been proved. The electrolytes and the deposition modes were developed that provide the deposition of Fe-Co-W coatings with the Co content of 32 to 47 аt. %, and W of 5 to 13 аt. %, and Fe-Mo-W coatings with the tungsten content of 5 to 11 at. %, and the molybdenum contents of 26 to 32 at. %, and the Fe-Сo-Мо coatings with the Co content ranging from 26 to 48 at. %, and Mo content ranging from 15 to 31 at. %, and the current efficiency ranging from 58 to 82 %. The variation schemes of electrochemical processes were suggested and these allow for the deposition of Fe-Mo-W and Fe-Co-W(Мо) coatings depending on their practical application. The perspective directions of the application of the obtained materials according to the results of experimental researches and tests of functional properties in model environments and technological conditions are determined.
Гарцунова, Л. "Особливості антонімічного перекладу (на матеріалі науково-технічних текстів)". Thesis, Сумський державний університет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/39225.
Повний текст джерелаСлізков, А. М., та Г. М. Михайлова. "Наукова класифікація ковдр з об’ємними наповнювачами". Thesis, Київський національний торговельно-економічний університет, 2019. https://er.knutd.edu.ua/handle/123456789/16425.
Повний текст джерелаОсипенко, Є. О. "Особливості перекладу науково-технічних текстів на матеріалі сфери комп’ютерних технологій". Master's thesis, Сумський державний університет, 2019. http://essuir.sumdu.edu.ua/handle/123456789/75319.
Повний текст джерелаДипломная работа посвящена изучению особенностей перевода научно-технических текстов в сфере компьютерных технологий. В ходе исследования были рассмотрены отличительные особенности научно-технических текстов, их стилистические и лексико-грамматические особенности. Сфокусировано внимание на исследовании специфики перевода научно-технических текстов, определены трудности их перевода и раскрыты возможности использования результатов работы в преподавании иностранного языка.
The thesis deals with the translational features of scientific and technical texts in the field of computer technology. It defines the distinctive stylistic and lexical-grammatical peculiarities of scientific and technical texts, outlines the difficulties of their translation and reveals the ability to use the results of the work while teaching the foreign language.
Осипенко, Є. О. "Особливості перекладу науково-технічних текстів на матеріалі сфери комп'ютерних технологій". Master's thesis, Сумський державний університет, 2019. http://essuir.sumdu.edu.ua/handle/123456789/75420.
Повний текст джерелаДипломная работа «Особенности перевода научно-технических текстов на материале сферы компьютерных технологий» посвящена изучению особенностей перевода научно-технических текстов в сфере компьютерных технологий. В ходе исследования были рассмотрены теоретические основы стиля научно-технических текстов, их стилистических и лексико-грамматических особенностей, было изучено проблему эквивалентности и адекватности перевода научно-технических текстов на материале лексико-грамматических структур англоязычных научно-технических текстов сферы компьютерных технологий. Было уделено внимание исследованию специфики перевода научно-технических текстов, перевода лексических единиц и терминологии в научно-технических текстах, рассмотрены переводческие трансформации: лексические, грамматические и синтаксические, уделено внимание основным трудностям при переводе. Были проанализированы возможности использования научно-технических текстов в профессионально ориентированном обучении иностранному языку студентов высших учебных заведений. Основной акцент сделан на англоязычных научно-технических текстах и особенностях их перевода в сфере компьютерных технологий.
Thesis "Peculiarities of the translation of scientific and technical texts on the material of the sphere of computer technology" is devoted to the investigation of the peculiarities of the translation of scientific and technical texts in the field of computer technology. During the study the following questions were examined: the theoretical foundations of the style of scientific and technical texts, their stylistic and lexical and grammatical features, also the problem of the equivalence and adequacy of the translation of scientific and technical texts on the material of the lexical and grammatical structures of English language scientific and technical texts in the field of computer technology was studied. Attention was paid to the study of the specifics of the translation of scientific and technical texts, translation of lexical units and terminology in scientific and technical texts; were considered translation transformations: lexical, grammatical and syntactic, also was paid attention to the main difficulties in translation. The possibilities of application of scientific and technical texts in professionally oriented teaching of a foreign language to students of higher educational institutions were analyzed. The main emphasis is made on English-language scientific and technical texts and the peculiarities of their translation in the field of computer technology.
Сокольський, Олександр Леонідович. "Наукові засади розроблення обладнання і процесів перероблення полімерних матеріалів методом екструзії". Thesis, КПІ ім. Ігоря Сікорського, 2020. https://ela.kpi.ua/handle/123456789/36299.
Повний текст джерелаThe thesis is devoted to research of features of equipment and processes for the preparation, mixing melt compositions based on the matrix of the first polymer with another polymer, liquid or disperse fillers and products formation for conditions including nonlinear behavior of materials, heat transfer, phase transitions and other features of technological processes. Developed refined mathematical models of three-dimensional motion of nonisothermal rheological complex environments freeform channels taking into account the effects of wall and elastic deformation of structural elements. Fundamentally new physical and mathematical models of polymer melting in the extruder channel have been developed. Implementation of the developed physical model on the basis of modeling systems allowed to obtain scientifically valid parameters of the polymer melting process in the screw channel and the design parameters of the melting zone. On the basis of the developed models, the calculations of the melting zone of the extruder were performed and the features of the temperature field, velocity field, distribution of the viscosity value and the melting process of the solid polymer tube were revealed. In this case, explanations of well-known effects, which do not fit into the framework of previously created models, were obtained. It has been found that the heat due to the friction of the material against the wall of the equipment and the viscous strain dissipation energy play a major role in the temperature distribution in the melting zone. There is a noticeable uneven distribution of speeds in sections along the channel. Thus, convective heat exchange occurs along the screw channel, which is not taken into account by many existing models of polymer melting process. Experimental and numerical studies show that with the destruction of residues of the melting tube does not end, there is a risk of removal of solid particles of polymer into the molding zone, which can lead to defects in the products. A mathematical model of the process of temperature homogenization of a polymer melt is proposed on the basis of the relations of nonlinear mechanics of continuous mediums. Numerical simulations of the process of temperature homogenization in a barrier mixer were performed, the basic regularities were determined and its rational parameters were determined. The regularities of the distribution of the dye concentration in the mixing zones of different design are investigated. The distribution of the dye concentration in the coaxial gap was investigated. To improve the mixing process in the channel, radial structural elements are required, which disrupt the flow in the radial direction, forming circulating zones. In the absence of such structural elements, mixing occurs only in the circumferential direction due to shear deformation. The dependence of mixing efficiency on the ratio of the viscosities of the dispersion medium to the dispersed material is investigated. For greater mixing efficiency, it is advisable to introduce the dispersed material into the coaxial mixing channel when rotating the outer cylinder. Mixing of two polymers in the screw channel was investigated. It has been found that when the dispersed material is introduced into the dispersion medium at the core of the rotating screw, it is practically twice as fast as when the dispersed material is introduced near the outer radius of the rotating screw. Therefore, it is advisable to use the option of introducing the dispersed material into the dispersion medium at the core of the rotating screw. Algorithms and methods of numerical calculations are proposed, which make it possible to analyze the flow distribution of polymeric materials in the molding channels of polymeric equipment with deformable walls. The obtained data allow us to predict the magnitude and nature of deformation of the molding elements and to take into account its effect on the equality of the formed product. Conducted refined numerical experiments allowed us to formulate recommendations for developers and operators of polymer equipment. A method of modeling and design of extrusion dies, which allows to determine the necessary configuration of the extrusion die and in particular its outlet to achieve the desired shape of the section of the extrudate after its stabilization is offered. The distribution of technological stresses along the length of the pipe under different modes of the cooling process was obtained. The result of the calculations made it possible to establish that the highest stresses occur under the conditions of bilateral cooling of water, which can lead to a deterioration of the quality of the pipe. Methods of experimental investigations of the regularities of the processes of feeding the extruder with a granular polymer, melting, extending the extrudate after its exit from the forming tool have been developed. Experimental settings have been created. Studies have been carried out to determine the physical properties of different polymeric materials at different stages of the extrusion process. The developed and patented installations for the study of the coefficients of friction and lateral pressure of granular materials, the main structural elements of the extruders, design proposals for the improvement of the structures of the extrusion dies and methods of their design are presented.
Диссертационная работа посвящена исследованию особенностей оборудо- вания и процессов для подготовки, смешения расплавов композиций и формования продукции в условиях учета нелинейной поведения материалов, теплообмена, фазовых переходов и других особенностей технологических процессов. Разработаны принципиально новые физические и математические модели плавления полимера в рабочем канале экструдера, которые позволяют выполнять анализ процессов формования полимерных материалов и осуществлять расчеты прочности и деформаций конструкций под действием термосиловых нагрузок. Создана математическая модель, которая позволяет моделировать процессы гомогенизации, смешения вязких жидкостей с другими компонентами и между собой. Исследованы закономерности распределения концентрации красителя в смесительных зонах. Разработана математическая модель течения нелинейно вязких жидкостей с учетом упругой деформации конструктивных элементов каналов технологического оборудования. Предложена методика моделирования и проектирования экструзионных головок, которая позволяет определять нужную конфигурацию экструзионной головки для обеспечения заданной формы сечения экструдата. Разработаны и запатентованы конструктивно-технологические решения переработки полимерных материалов методом экструзии, а также методики их проектирования.
Садівничий, Володимир Олексійович, Владимир Алексеевич Садовничий, Volodymyr Oleksiiovych Sadivnychyi та Н. О. Стоволос. "Взаємозв`язок текстового та ілюстративного матеріалу в наукових виданнях". Thesis, Видавництво СумДУ, 2006. http://essuir.sumdu.edu.ua/handle/123456789/20330.
Повний текст джерелаКниги з теми "Наукові матеріали"
Дніпровська, орбіта. Матеріали наукових читань "Дніпровська орбіта - 2008". Дніпропетровськ: НЦАОМ, 2008.
Знайти повний текст джерелаПитання, удосконалення судової. Матеріали науково-практичної конференції "Питання удосконалення судової системи України". Харків: Кроссроуд, 2007.
Знайти повний текст джерелаПсихологія, особистості безробітного. Матеріали 3 Всеукраїнської науково-практичної конференції: Психологія особистості безробітного. Київ: Інститут підготовки кадрів держ. служби зайнятості України, 2006.
Знайти повний текст джерелаВелесова, книга. Матеріали Всеукраїнської наукової конференції "Велесова книга - пам"ятка української культури". Київ: КиМУ, 2005.
Знайти повний текст джерелаГромадянське, суспільство і. Матеріали науково-практичної українсько-польської конференції (Львів 4-5 березня 2002 р.). Львів: Доброчинний громадський Фонд ім. Князя Осмомисла, Наукове Товариство ім. Шевченк, 2003.
Знайти повний текст джерелаПолітичні, репресії на. Матеріали міжнародної науково-практичної конференції "Політичні репресії на Поділлі в 20 столітті". Вінниця: Велес, 2002.
Знайти повний текст джерелаТеорія, та досвід. Матеріали Всеукраїнської науково-практичної конференції:Теорія та досвід застосування тренінгових технологій у практичній психології. Київ: КІВС, 2003.
Знайти повний текст джерелаРозвиток, географічної думки. Матеріали всеукраїнської науково-практичної конференції: Розвиток географічної думки на півдні України: проблеми і пошуки. Мелітополь: Мелітополь, 2006.
Знайти повний текст джерелаКовальчук, Інна, та Вікторія Поліщук, ред. Лінгвокогнітивні та соціокультурні аспекти комунікації. Видавництво Національного університету «Острозька академія», 2020. http://dx.doi.org/10.25264/26.11.2020.
Повний текст джерелаII Міжнародна наукова конференція «НАУКОВІ ТРЕНДИ ПОСТІНДУСТРІАЛЬНОГО СУСПІЛЬСТВА». Європейська наукова платформа, 2021. http://dx.doi.org/10.36074/mcnd-03.12.2021.
Повний текст джерелаЧастини книг з теми "Наукові матеріали"
Воронько, Віталій, та Ірина Воронько. "ОБЛАСТІ ЗАСТОСУВАННЯ БЕЗПІЛОТНИХ ЛІТАЛЬНИХ АПАРАТІВ". У Сучасний стан проведення наукових досліджень у IT-технологіях, галузях електроніки, інженерії, нанотехнологіях та транспортній сфері (1st ed.), 131–45. European Scientific Platform, 2020. http://dx.doi.org/10.36074/csriteenat.ed-1.08.
Повний текст джерелаТези доповідей конференцій з теми "Наукові матеріали"
Маркова, Олена, та Тетяна Шматок. "ДУАЛЬНА ФОРМА ЗДОБУТТЯ ОСВІТИ – МОЖЛИВІСТЬ НАВЧАТИСЯ ПРАЦЮЮЧИ МАТЕРІАЛИ КОНФЕРЕНЦІЇ". У МІЖДИСЦИПЛІНАРНІ НАУКОВІ ДОСЛІДЖЕННЯ: ОСОБЛИВОСТІ ТА ТЕНДЕНЦІЇ. Міжнародний центр наукових досліджень, 2020. http://dx.doi.org/10.36074/04.12.2020.v4.04.
Повний текст джерела"Сучасні дослідження культури і мистецтва: Матеріали Всеукр. наук.-практ. конф., м. Сєвєродонецьк, 25 - 26 листопада 2021 р. / Заг. ред. О. О. Смоліна, О. С. Ухов. – Сєвєродонецьк : вид-во СНУ iм. В. Даля, 2021. – 232 с." У Сучасні дослідження культури і мистецтва. Східноукраїнський національний університет імені Володимира Даля, 2021. http://dx.doi.org/10.33216/conferencematerialssnu(mrca)-2021-232.
Повний текст джерела"Історичні студії СНУ ім. В. Даля : Матеріали ІІ Всеукраїнської науково-практичної конференції". У Історичні студії СНУ ім. В. Даля. Східноукраїнський національний університет імені Володимира Даля, 2021. http://dx.doi.org/10.33216/conferencematerialssnu(hs)-2021-94.
Повний текст джерелаБудугай, Андрій Олександрович. "Етапи роботи над скоромовками у процесі дистанційного вивчення української мови іноземними слухачами. Використання гарячих (швидких) клавіш під час підготовки матеріалів занять". У ІІ Міжнародна науково-практична конференція. Bila Tserkva National Agrarian University, 2021. http://dx.doi.org/10.33245/20-05-2021-18-24.
Повний текст джерелаБудугай, Ольга Дмитрівна. "Культурологічний проект «Сім чудес України» як ефективне джерело вивчення лінгвокраїнознавства іноземними громадянами". У ІІ Міжнародна науково-практична конференція. Bila Tserkva National Agrarian University, 2021. http://dx.doi.org/10.33245/20-05-2021-25-29.
Повний текст джерелаГапон, Юліана, та Марина Чиркіна. "КАТОДНІ МАТЕРІАЛИ ДЛЯ ЕЛЕКТРОХІМІЧНОГО ОЧИЩЕННЯ СТІЧНИХ ВОД". У ПРОБЛЕМИ ТА ПЕРСПЕКТИВИ РЕАЛІЗАЦІЇ ТА ВПРОВАДЖЕННЯ МІЖДИСЦИПЛІНАРНИХ НАУКОВИХ ДОСЯГНЕНЬ. Міжнародний центр наукових досліджень, 2020. http://dx.doi.org/10.36074/12.06.2020.v1.03.
Повний текст джерелаЛитвинко, Оксана. "МЕТАФОРИЗАЦІЯ (НА МАТЕРІАЛІ АНГЛІЙСЬКОЇ СУБМОВИ НАСОСОБУДУВАННЯ)". У НАУКОВИЙ ПРОСТІР: АКТУАЛЬНІ ПИТАННЯ, ДОСЯГНЕННЯ ТА ІННОВАЦІЇ. Міжнародний центр наукових досліджень, 2020. http://dx.doi.org/10.36074/02.10.2020.v2.08.
Повний текст джерелаКорнєлаєва, Євгенія. "ОНОМАТОПЕЯ В РЕКЛАМНОМУ ТЕКСТІ (НА МАТЕРІАЛІ АНГЛІЙСЬКОЇ МОВИ)". У ТРАДИЦІЙНІ ТА ІННОВАЦІЙНІ ПІДХОДИ ДО НАУКОВИХ ДОСЛІДЖЕНЬ. Міжнародний центр наукових досліджень, 2020. http://dx.doi.org/10.36074/10.04.2020.v2.18.
Повний текст джерелаКосован, Тетяна, та Марія Штефанюк. "РЕКЛАМНІ ОГОЛОШЕННЯ В УКРАЇНСЬКИХ ПЕРІОДИЧНИХ ВИДАННЯХ КІНЦЯ XIX – ПОЧАТКУ XX СТ. (ЗА МАТЕРІАЛАМИ ЧЕРНІВЕЦЬКОЇ ГАЗЕТИ «БУКОВИНА»)". У НАУКОВІ ДОСЯГНЕННЯ МОЛОДІ: ОСОБЛИВОСТІ ТА ПЕРСПЕКТИВИ, Chair Л. Ткач. Молодіжна наукова ліга, 2020. http://dx.doi.org/10.36074/19.06.2020.v2.01.
Повний текст джерелаКатріченко, Ксенія. "ПРИРОДНІ ЗВУКОПОГЛИНАЛЬНІ МАТЕРІАЛИ ЯК ЗАСІБ ВИРІШЕННЯ ЕКОЛОГІЧНИХ ПРОБЛЕМ В ДИЗАЙНІ НАВЧАЛЬНОГО ПРОСТОРУ". У МІЖГАЛУЗЕВІ ДИСПУТИ: ДИНАМІКА ТА РОЗВИТОК СУЧАСНИХ НАУКОВИХ ДОСЛІДЖЕНЬ, Chair Олена Васіна. Міжнародний центр наукових досліджень, 2020. http://dx.doi.org/10.36074/10.07.2020.v2.27.
Повний текст джерелаЗвіти організацій з теми "Наукові матеріали"
Шляхтич, Р. П., А. В. Тарасов, H. A. Печеніна, Н. М. Товстоляк та В. А. Фінічева, ред. Наукові розвідки науковців, музейних працівників, магістрантів, студентів, членів МАН : матеріали Перших історико-краєзнавчих читань. Chair В. О. Шайкан. Криворізький педагогічний інститут ДВНЗ "Криворізький національний університет", 2015. http://dx.doi.org/10.31812/0564/797.
Повний текст джерелаКафедра педагогіки та методики ТО. Педагогічні читання з нагоди 90-річчя Криворізького державного педагогічного університету та вшанування пам’яті професорів П. І. Шевченка та В. С. Пікельної. КДПУ, 2020. http://dx.doi.org/10.31812/123456789/4192.
Повний текст джерелаКовшар, О. В., та К. Є. Суятинової, ред. Дошкільна освіта: проблеми, пошуки, інновації: збірник наукових і навчально-методичних праць. КДПУ, травень 2022. http://dx.doi.org/10.31812/123456789/6093.
Повний текст джерелаДікунова, О. А., та Ю. С. Душко. Відкритий Всесвіт Валерії Семенівни Пікельної (на пошану пам’яті доктора педагогічних наук, професора Криворізького державного педагогічного інституту/університету, керівника наукової школи з теорії та практики управління навчальними закладами). Криворізький державний педагогічний університет, 2015. http://dx.doi.org/10.31812/0564/252.
Повний текст джерелаПоліщук, О. Б., та Ю. С. Душко. Видатний геоботанік України (до 100-річчя від дня народження професора І. А. Добровольського). Криворізький державний педагогічний університет, 2016. http://dx.doi.org/10.31812/0564/370.
Повний текст джерелаПоліщук, О. Б., та Ю. С. Душко. Видатний геоботанік України (до 100-річчя від дня народження професора І. А. Добровольського). Криворізький державний педагогічний університет, 2016. http://dx.doi.org/10.31812/0564/370.
Повний текст джерелаКолоїз, Ж. В., З. П. Бакум, Л. А. Білоконенко та Т. І. Вавринюк. Матеріали студентських наукових читань. КДПУ, грудень 2021. http://dx.doi.org/10.31812/123456789/5826.
Повний текст джерелаДікунова, О. А., та Ю. С. Душко. Олександр Андрійович Коновал: обранець науки як долі. Криворізький державний педагогічний університет, 2016. http://dx.doi.org/10.31812/0564/435.
Повний текст джерелаДікунова, О. А., та Ю. С. Душко. Олександр Андрійович Коновал: обранець науки як долі. Криворізький державний педагогічний університет, 2016. http://dx.doi.org/10.31812/0564/435.
Повний текст джерелаКрамаренко, Т. Г. Методи математичної статистики у науково-дослідній роботі педагогів. БДПУ, вересень 2017. http://dx.doi.org/10.31812/0564/1505.
Повний текст джерела