Добірка наукової літератури з теми "Форма ливарна"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Зміст
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Форма ливарна".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Форма ливарна"
Селівьорстова, Тетяна, Вадим Селівьорстов та Олександр Чернов. "ОСОБЛИВОСТІ РЕАЛІЗАЦІЇ ГРАФІЧНОГО ІНТЕРАКТИВНОГО ІГРОВОГО ДОДАТКУ ДЛЯ ОЗНАЙОМЛЕННЯ З ТЕХНОЛОГІЄЮ ГАЗОДИНАМІЧНОГО ВПЛИВУ НА РОЗПЛАВ В ЛИВАРНІЙ ФОРМІ". System technologies 1, № 132 (1 березня 2021): 3–22. http://dx.doi.org/10.34185/1562-9945-1-132-2021-01.
Повний текст джерелаBoyko, M. V., O. T. Velyka, S. E. Liaskovska та N. T. I. Velykiy. "Дослідження та аналіз параметрів продуктивності прес-форми". Scientific Bulletin of UNFU 29, № 7 (26 вересня 2019): 129–34. http://dx.doi.org/10.15421/40290726.
Повний текст джерелаSheiko, Iryna. "Керамічні ливарні форми для виготовлення античних світильників". Eminak, № 1(25) (7 квітня 2019): 119–26. http://dx.doi.org/10.33782/eminak2019.1(25).216.
Повний текст джерелаKarpyk, R. T., та S. V. Didyk. "Автоматизація процесу проектування прес-форм для литва термопластів під тиском". Scientific Bulletin of UNFU 28, № 7 (27 вересня 2018): 97–100. http://dx.doi.org/10.15421/40280721.
Повний текст джерелаБойко-Гагарін, А. С. "Технологічні аспекти виготовлення фальшивих монет у Російській та Австро-Угорській імперії у ХІХ – на початку ХХ ст". Studies in history and philosophy of science and technology 29, № 2 (26 грудня 2020): 67–76. http://dx.doi.org/10.15421/272022.
Повний текст джерелаШейко, І. "Керамічні ливарні форми для виготовлення античних світильників". Емінак, № 1 (25), січень - березень (2019): 119–26.
Знайти повний текст джерелаСелівьорстова, Тетяна. "КОМП’ЮТЕРНА ІМІТАЦІЙНА МОДЕЛЬ ТЕХНОЛОГІЧНОГО ПРОЦЕСУ РЕАЛІЗАЦІЇ ГАЗОДИНАМІЧНОГО ТИСКУ НА РОЗПЛАВ ПРИ САМОГЕРМЕТИЗАЦІЇ ВИЛИВКА". System technologies 5, № 136 (29 травня 2021): 196–208. http://dx.doi.org/10.34185/1562-9945-5-136-2021-19.
Повний текст джерелаChernyshyn, O. G., O. M. Nedbailo та M. P. Kuzminec. "Кінетика сушіння Nа+- заміщеної форми бентонітової глини". Кераміка: наука і життя, № 3(36) (31 жовтня 2017): 20. http://dx.doi.org/10.26909/csl.3.2017.3.
Повний текст джерелаDenisenko, Alexandr Ivanovich, та Vitalij Ivanovich Tsotsko. "МОДЕЛЮВАННЯ КРИСТАЛІЗАЦІЇ ЛИТИХ ВИРОБІВ В ОБЛАСТІ ОТВОРІВ ЦИЛІНДРИЧНОЇ ФОРМИ". Modern Problems of Metalurgy 1, № 22 (6 листопада 2019): 114–29. http://dx.doi.org/10.34185/1991-7848.2019.01.12.
Повний текст джерелаSelivyorstov, Vadim, та Tatjana Selivyorstova. "ПЕРСПЕКТИВИ ВИКОРИСТАННЯ КОМПЛЕКСНИХ ТЕХНОЛОГІЙ ГАЗОДИНАМІЧНОГО ВПЛИВУ НА РОЗПЛАВ В ЛИВАРНІЙ ФОРМІ". System technologies 5, № 130 (4 травня 2020): 112–43. http://dx.doi.org/10.34185/1562-9945-5-130-2020-14.
Повний текст джерелаДисертації з теми "Форма ливарна"
Сігова, Валентина Іванівна, Валентина Ивановна Сигова, Valentyna Ivanivna Sihova та О. В. Лохоня. "Повышение долговечности стержней литейных форм". Thesis, Издательство СумГУ, 2008. http://essuir.sumdu.edu.ua/handle/123456789/7035.
Повний текст джерелаЧибічик, Ольга Анатоліївна, О. В. Акімов та О. М. Горощенко. "Математична модель впливу технологічних факторів на якість заливки роторів електродвигунів". Thesis, Національний технічний університет "Харківський політехнічний інститут", 2017. http://repository.kpi.kharkov.ua/handle/KhPI-Press/44909.
Повний текст джерелаАлєксєєва, Ю. М., та Катерина Олександрівна Костик. "Особливості відцентрованого лиття". Thesis, Національний технічний університет "Харківський політехнічний інститут", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/47066.
Повний текст джерелаАлєксєєва, Ю. М., та Катерина Олександрівна Костик. "Відцентровий спосіб лиття". Thesis, Національний технічний університет "Харківський політехнічний інститут", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/47090.
Повний текст джерелаБільченко, Олександр Сергійович. "Розроблення технологічного процесу виготовлення виливка «Упор», організація та планування сумішоприготувального відділення ливарного цеху". Bachelor's thesis, КПІ ім. Ігоря Сікорського, 2020. https://ela.kpi.ua/handle/123456789/34812.
Повний текст джерелаDiploma project: 91 pages, 36 tables, 7 figures, 8 references. Object of design - Development of technological process of casting "Emphasis", organization and planning of the mixture preparation department of the foundry. The subject of design is the technology of the casting mold and the organization of the mixture preparation department. The results of the design - the technology of the mold is developed, the technical planning of the mixture preparation department and the calculation of the foundry equipment are performed. The design results can be recommended: for implementation in the production of castings weighing up to 350 kg, medium complexity in terms of mass production. Field of use - mechanical engineering, instrument making, complex, etc.
Шевчун, Дмитро Юрійович. "Ливарний комплекс машинобудівного заводу з розробленням технологій виготовлення виливків різними способами лиття". Master's thesis, КПІ ім. Ігоря Сікорського, 2020. https://ela.kpi.ua/handle/123456789/42993.
Повний текст джерелаThe dissertation consists of: 115 pages; 11 figs .; 21 tables; 25 links. The project envisages a foundry with a capacity of 1000 tons of suitable castings per year from such metal as alloys of grades 20L 25L 35L and 40HL. The technological process of making the casting "Wheel" weighing 410 kg from 35L metal and the second casting "Cover" weighing 0.9 kg from 25L metal is being developed. The results of the design – the technology of casting "Wheel" by casting in disposable sand-clay molds and the technology of casting "Cover" by casting on melted models. The technical planning of the foundry department and foundry equipment was performed. When designing the departments, an analysis of the need for equipment, the calculation of organizational and economic factors, the result of which is the calculation of wages (basic and auxiliary), depreciation costs of equipment and energy resources used to accelerate the production process. According to the regulations, all measures for the safety of life of employees are taken into account and attention is paid to preserving the environmental friendliness of the environment by installing precautions near the equipment and installing hoods in the building structure and directly in the finishing department.
Буряк, Андрій Андрійович. "Розроблення технологічного процесу виготовлення чавунного виливка «Корпус», організація та планування формувального відділення ливарного цеху". Bachelor's thesis, КПІ ім. Ігоря Сікорського, 2021. https://ela.kpi.ua/handle/123456789/43671.
Повний текст джерелаThesis project: pages, 22 tables, 10 figures, 9 references. The object of design - the technological process of manufacturing a carbon steel casting "Gearbox housing" weighing 3,04 kg by casting in disposable sand claymolds. The subject of design - the technology of the mold and the organization of the molding department of the foundry. Design results - the technology of the casting mold for a given casting is developed, the technical planning of the molding department and the calculation ofthe unit of the casting equipment are performed. Design results - can be recommended at foundries with a similar nature of production. Field of use - enterprises of agricultural engineering, military-industrial complex, etc.
Алєксєєва, Ю. М., та Катерина Олександрівна Костик. "Особливості відцентрового лиття". Thesis, Запорізька торгово-промислова палата, 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/47061.
Повний текст джерелаДегерменджі, Анастасія Всеволодівна. "Ливарний комплекс АТ ”Полтавський турбомеханічний завод” з розробкою технології лиття". Master's thesis, Київ, 2018. https://ela.kpi.ua/handle/123456789/26676.
Повний текст джерелаThe design object is an iron foundry with the development of technological processes for the production of castings of various masses by casting into one-off sand-clay forms. The aim of the project is to determine the technological parameters and compile a description of the production of the casting; development and justification of the stage of preparation of the liquid alloy; technological planning and design of a foundry. The technological process of casting manufacturing has been developed can be recommended as typical for the production of iron castings of medium complexity in small-scale and large-scale production. Preliminary calculations of the economic indicators of the adopted design decisions established the economic feasibility of using the proposed processes. An organizational chart of the foundry’s work and measures aimed at eliminating dangerous and harmful factors have been developed.
Объект проектирования - чугунолитейный цех с разработкой технологических процессов изготовления отливок различной массы литьем в разовые песчано-глинистые формы. Целью проекта является определение технологических параметров и составления описания производства отливки; разработка и обоснование этапе приготовлении жидкого сплава; технологическое планирование и проектирование литейного цеха. Разработан технологический процесс изготовления отливки может быть рекомендован как типичный при производстве чугунных отливок средней сложности в условиях мелкосерийного и крупносерийного производства. Предварительным расчетам экономических показателей принятых проектных решений установлено экономическую целесообразность использования предложенных процессов. Разработана организационная схема работы литейного цеха и меры, направленные на устранение опасных и вредных факторов.