Книги з теми "ZINC COATED C.I"

Establishment, Building Research, ed. Zinc-coated steel. Watford: Building Research Establishment, 1986.

Zou, Chunxian. Corrosion behaviour of zinc alloy coated steel fasteners in timber. Birmingham: Aston University. Department ofCivil Engineering, 1993.

Sweet, Beryle G., and Thomas C. Britton, eds. Atmospheric Corrosion Investigation of Aluminum-Coated, Zinc-Coated, and Copper-Bearing Steel Wire and Wire Products. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1995. http://dx.doi.org/10.1520/ds65-eb.

International, Conference on Zinc and Zinc Alloy Coated Steel Sheet (6th 2004 Chicago IL U. S. A. ). 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet: GALVATECH '04, April 4-7, 2004. Warrendale, PA: Association for Iron & Steel Technology, 2004.

IEEE Power Engineering Society. Transmission and Distribution Committee., American National Standards Institute, Institute of Electrical and Electronics Engineers., and IEEE Standards Board, eds. IEEE standard for zinc-coated ferrous insulator clevises for overhead line construction. New York, N.Y., USA: Institute of Electrical and Electronics Engineers, 1998.

IEEE Power Engineering Society. Transmission and Distribution Committee., Institute of Electrical and Electronics Engineers., IEEE Standards Board, and IEEE Standards Association, eds. IEEE standard for zinc-coated ferrous lag screws for overhead line construction. New York: Institute of Electrical and Electronics Engineers, 2001.

International Conference on Zinc and Zinc Alloy Coated Steel Sheet (5th 2001 Brussels, Belgium). 5th International Conference on Zinc and Zinc Alloy Coated Steel Sheet: GALVATECH '2001 : June 26-28, 2001, Brussels, Belgium. Edited by Lamberights Marcel. Düsseldorf: Verlag Stahleisen, 2001.

IEEE Power Engineering Society. Transmission and Distribution Committee., Institute of Electrical and Electronics Engineers., and IEEE-SA Standards Board, eds. IEEE standard for zinc-coated steel bolts and nuts for overhead line construction. New York, N.Y., USA: Institute of Electrical and Electronics Engineers, 1999.

International Conference on Zinc and Zinc Alloy Coated Steel Sheet. (2nd 1992 Amsterdam, The Netherlands). 2nd International Conference on Zinc and Zinc Alloy Coated Steel Sheet: Galvatech '92 : Amsterdam, The Netherlands, September 8-10, 1992. Edited by Centre de recherches métallurgiques. Dusseldorf, Germany: Verlag Stahleisen mbH, 1992.

Sweet, Beryle G. Atmospheric corrosion investigation of aluminum-coated, zinc-coated, and copper-bearing steel wire and wire products: A thirty-two year report. Philadelphia, PA, U.S.A: ASTM, 1995.

International, Conference on Zinc and Zinc Alloy Coated Steel Sheet (1989 Tokyo Japan). Proceedings: International Conference on Zinc and Zinc Alloy Coated Steel Sheet : galvatech ʼ89 : September 5-7, 1989 Keidanren Kaikan Tokyo Japan. Tokyo, Japan: Iron and Steel Institute of Japan, 1989.

Trautmann, Andreas. Bifocal hybrid laser welding: A technology for welding of aluminium and zinc-coated steels. München: Herbert Utz Verlag, 2009.

IEEE Power Engineering Society. Transmission and Distribution Committee., Institute of Electrical and Electronics Engineers., and IEEE-SA Standards Board, eds. IEEE standard for threaded zinc-coated ferrous strand-eye anchor rods and nuts for overhead line construction. New York, N.Y., USA: Institute of Electrical and Electronics Engineers, 1999.

Galvatech '95 (1995 Chicago, Ill.). Galvatech '95: Conference proceedings : the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century: September 17-21, 1995, Chicago, IL, USA. Warrendale, PA: The Society, 1995.

E, Wiedemann Karl, and Langley Research Center, eds. Mechanical properties of coated titanium Beta-21S after exposure to air and 700 and 800⁰C. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

E, Wiedemann Karl, and Langley Research Center, eds. Mechanical properties of coated titanium Beta-21S after exposure to air and 700 and 800⁰C. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

R, Marder A., Metallurgical Society of AIME. Ferrous Metallurgical Committee., TMS Ferrous Metallurgy Committee., Minerals, Metals and Materials Society. Meeting, and International Conference on the Physical Metallurgy of Zinc Coated Steels: Processing, Structure, and Properties (1994 : San Francisco, Calif.), eds. The Physical metallurgy of zinc coated steel: Proceedings of an international conference sponsored by the Ferrous Metallurgy Committee of TMS/AIME held at the TMS Annual Meeting in San Francisco, California, February 27-March 3, 1994. Warrendale, Pa: Minerals, Metals & Materials Society, 1994.

McKnight, Mary E. Preliminary recommendations for maintenance of factory coated metal siding and roofing: Mary C. [i.e. Mary E.] McKnight, Robert G. Mathey, and Richard W. Drisko. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, 1985.

Marder, Arnold, and Frank Goodwin. Metallurgy of Zinc Coated Steels. Elsevier, 2023.

Marder, Arnold, and Frank Goodwin. Metallurgy of Zinc Coated Steels. Elsevier, 2023.

The 2006-2011 World Outlook for Coated Carbon Steel Round Wire Excluding Zinc-Coated. Icon Group International, Inc., 2005.

The 2006-2011 World Outlook for Coated Carbon Steel Flat Wire Excluding Zinc-Coated. Icon Group International, Inc., 2005.

Parker, Philip M. The 2007-2012 World Outlook for Coated Carbon Steel Round Wire Excluding Zinc-Coated. ICON Group International, Inc., 2006.

Ashburn, Ronald E. 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet: Galvatech '04, April 4-7, 2004. Association for Iron & Steel Technology, 2004.

Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction. IEEE Standards Office, 2000.

Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction. IEEE Standards Office, 2000.

Parker, Philip M. The 2007-2012 World Outlook for Zinc-Coated and Zinc-Plated Carbon Steel Round Wire under 1.55 Mm in Diameter. ICON Group International, Inc., 2006.

Parker, Philip M. The 2007-2012 World Outlook for Zinc-Coated and Zinc-Plated Carbon Steel Flat Wire and Wire Shapes Excluding Round Wire. ICON Group International, Inc., 2006.

The 2006-2011 World Outlook for Zinc-Coated and Zinc-Plated Carbon Steel Flat Wire and Wire Shapes Excluding Round Wire. Icon Group International, Inc., 2005.

Galvatech '95 Conference Proceedings: The Use and Manufacture of Zinc and Zinc Alloy Coated Sheet Steel Products into the 21st Century. Iron & Steel Society, 1996.

C135.20-1998 IEEE Standard for Zinc-Coated Ferrous Insulator Clevises for Overhead Line Construction. Inst of Elect & Electronic, 1999.

The 2006-2011 World Outlook for Zinc-Coated and Zinc-Plated Carbon Steel Round Wire of at Least 1.55 Mm in Diameter. Icon Group International, Inc., 2005.

Parker, Philip M. The 2007-2012 World Outlook for Zinc-Coated and Zinc-Plated Carbon Steel Round Wire of at Least 1.55 Mm in Diameter. ICON Group International, Inc., 2006.

Standard for Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line Construction. IEEE Standards Office, 2000.

Standard for Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line Construction. IEEE Standards Office, 2000.

Natural Cold and Flu Defense: Using Echinacea, Zinc, Vitamin C and Other Supplements (Woodland Health). Woodland Publishing, 1998.

The World Market for Plated or Zinc-Coated Iron and Non-Alloy Steel Flat-Rolled Products: A 2004 Global Trade Perspective. Icon Group International, Inc., 2005.

Parker, Philip M. The World Market for Plated or Zinc-Coated Iron and Non-Alloy Steel Flat-Rolled Products: A 2007 Global Trade Perspective. ICON Group International, Inc., 2006.

National Aeronautics and Space Administration (NASA) Staff. Long-Term Cyclic Oxidation Behavior of Uncoated and Coated Re-108 and in-939 at 980 and 870 C. Independently Published, 2018.

Publishers, Museum. Notebook: Battersea Bridge, C. 1868, Francis Seymour Haden, English, 1818-1910, England, Etching and Drypoint on Zinc Printed on Ivory Wove Paper. Independently Published, 2020.

Griepink, B. The Certification of the Content (Mass Fractions) of Arsenic, Cadmium, Copper, Cobalt, Manganese, Lead, Selenium and Zinc in a Single Cell Protein: C. European Communities, 1987.