Дисертації з теми "Vinyle Acetate"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Vinyle Acetate".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Glikman, Jean-François. "Oxydation photo-thermique des copolymeres ethylene-acetate de vinyle, ethylene-acrylate d'ethyle, ethylene-acide acrylique." Clermont-Ferrand 2, 1987. http://www.theses.fr/1987CLF21050.
Повний текст джерелаMorel, Aurélie. "Synthèse et comportement auto-associatif des copolymères poly(acetate de vinyle)-b-poly(acide acrylique) et de leurs dérivés hydrolysés." Montpellier 2, 2004. http://www.theses.fr/2004MON20162.
Повний текст джерелаDhuiège, Benjamin. "Acylation des nanocelluloses en milieu aqueux par transestérification des esters de vinyle et utilisation comme charge dans le caoutchouc naturel." Thesis, Bordeaux, 2017. http://www.theses.fr/2017BORD0645/document.
Повний текст джерелаThe objective of this research work consists in the elaboration of novel composite materials (elastomers, adhesives) using nanocelluloses (CNC and NFC) as biobased reinforcing fillers. A method allowing the functionalization of nanocelluloses in aqueous conditions was first developed, with the aim of ultimately improving their compatibility with polymer matrices. The reaction, based on the transesterification of vinyl esters, was optimized with vinyl acetate selected as model reactant. The grafting performed in basic aqueous conditions was efficient, but also led to the formation of poly(vinyl acetate) as a by-product. To limit this problem, a second protocol in neutral aqueous conditions was also developed, but lower yields were obtained in that case. The unmodified and acetylated nanocelluloses were then dispersed in a natural rubber matrix (NR), to study the impact of this filler on the thermomechanical performances of the crude and vulcanized material. An improvement of the mechanical properties was observed in the presence of NCC or NFC, but the acetylation of the nanoparticles did not enhance further the performances. Finally, a valorization of the PVAc produced during the acetylation of the nanocelluloses in basic aqueous conditions was proposed. The dispersion of the acetylated NCC in the PVAc polymerized in-situ indeed led to the production of composites with improved properties. The subsequent utilization of these composites as filler (master batch) in NR or EVA matrices was discussed
Atanase, Léonard-ionut. "Contribution à l'étude des complexes Poly (vinyle alcool - vinyle acétate) / tensioactifs anioniques : caractéristiques colloïdales des nanogels et extension aux copolymères à blocs." Thesis, Mulhouse, 2010. http://www.theses.fr/2010MULH3728.
Повний текст джерелаPoly (vinyl acetate-co-vinyl alcohol) copolymers, designated by PVA, are macromolecular surfactants obtained by partial hydrolysis of poly (vinyl acetate) (PVAc). If the surfactant properties of PVA have been correlated with molecular characteristics it is not the same for the colloidal aggregates in aqueous solutions so-called nanogels. The objective of this thesis was to characterize the nanogels using techniques such as dynamic light scattering, size exclusion chromatography and viscometry.9 PVA with degrees of hydrolysis between 73 and 88 mole% and polymerization degrees of 650 to 2500 were studied. It appeared that the nanogels, formed by hydrophobic-hydrophobic interactions between acetate sequences, are the size in the range of 20 to 40 nm with volume fractions between 20 and 30%. The disaggregation of nanogels by complex formation with anionic surfactants such as SDS and SDBS was further demonstrated. By using the "cloud point" fractionation technique it appeared that SDS is complexed by the sequences with high acetate content and in particular those with significant lengths of acetate sequences.As a model system diblock copolymers PVAc-b-PVOH containing a PVAc hydrophobie sequence and a PVOH hydrophilic sequence were prepared by RAFT polymerization, followed by a click reaction. A preliminary micellization study of these copolymers showed a very strong analogy between PVAc-b-PVOH block copolymer micelles and PVA nanogels discussed above
Dommanget, Cédric. "Polymérisation radicalaire contrôlée : le défi de l'éthylène." Thesis, Lyon 1, 2013. http://www.theses.fr/2013LYO10216/document.
Повний текст джерелаThe work presented in this thesis displays the controlled radical polymerization of ethylene at low temperature (70 °C) and low pressure (200 bar) and the synthesis of block copolymers featuring polyethylene segments. Four polymerization techniques, commonly used in macromolecular engineering, were studied: NMP, CMRP, RAFT/MADIX and ESCP. Our investigation of the use of SG1 nitroxide (NMP) and cobalt (II) acetylacetonate (CMRP) as controlling agents demonstrated their inability to control the polymerization of ethylene. Nonetheless, an unexpected reaction with cobalt (II) acetylacetonate was observed. The coupling reaction between propagating radicals appeared to be favored by the presence of this compound. On the other hand, the first controlled polymerization of ethylene was successfully achieved by using xanthate (RAFT/MADIX). A linear increase of molecular weight with conversion and low polydispersities were observed for the produced polyethylenes. The reaction was demonstrated to be a pseudo-living polymerization by the synthesis of block copolymers poly(vinyl acetate)-b-polyethylene. In addition, midchain-functionalized polyethylenes and ABA type block copolymers, with polystyrene or polyacrylate as the A block and polyethylene as the B block, were also prepared using nitrone based polymerization technique (ESCP)
Atanase, Léonard-Ionut. "Contribution à l'étude des complexes Poly (vinyle alcool - vinyle acétate) / tensioactifs anioniques : caractéristiques colloïdales des nanogels et extension aux copolymères à blocs." Phd thesis, Université de Haute Alsace - Mulhouse, 2010. http://tel.archives-ouvertes.fr/tel-00562063.
Повний текст джерелаPalma, Mauri Sergio Alves. "Polimerização de acetato de vinila em emulsão de modo contínuo em coluna pulsada de pratos perfurados." Universidade de São Paulo, 2002. http://www.teses.usp.br/teses/disponiveis/3/3137/tde-27082013-122010/.
Повний текст джерелаIndustrial emulsion polymerization processes are usually carried out in stirred tanks operated in batch/semibatch or in continuous mode (CSTR). In comparison to batch processes, continuous reactors present several advantages such as lower volumes and better quality control by reducing batch-to-batch variations. Continuous emulsion polymerization in CSTR may exhibit sustained oscillations in conversion, particle size and particle concentration. Such oscillations may be reduced in pulsed tubular reactors due to less axial mixing. In this thesis a new type of tubular reactor, called Pulsed Sieve Plate Column, PSPC, was developed for the continuous process of vinyl acetate emulsion polymerization. This reactor is operated using oscillatory pulsed flow and uses perforated plates as internals. Residence time distribution runs were carried out in a glass reactor in order to characterize the axial mixing and flow patterns in the PSPC. The data were treated using the axially dispersed plug flow model. Axial dispersion coefficient was measured for different conditions of pulse frequency and amplitude, flow rate, plate spacing and viscosity. It was found that the degree of axial mixing can be varied in wide ranges by manipulating pulsation frequency and/or amplitude. Vinyl acetate continuous emulsion polymerization runs were carried out in a jacketed stainless steel reactor (with the same size of the glass reactor). Monomer conversion and particle size distribution was measured both at the reactor exit in transient state and along the reactor length at steady-state. It was found that average residence time and degree of axial mixing affect process and product quality variables, such as monomer conversion, mean particle size and concentration, but did not affect the viscosity of the emulsion produced, for the recipe and conditions used. A mathematical model for the reactor was developed. The model used, based on a well-known kinetic model previously developed in the literature for batch emulsion polymerization, was adapted to the continuous tubular reactor by adding the dispersion and convective terms to the balance equations. The model was numerically solved. Only two parameters were adjusted in this model and the simulated results showed excellent agreement with the experimental results, for steady state conditions. The proposed tubular reactor allows to reach high monomer conversion with similar or even lower residence time than those in batch processes and reaches steady state operation in just one to two mean residence times. The reactor is efficient, easy-to-built, easy-to-clean, robust and promising for use in industrial continuous emulsion polymerization of vinyl acetate.
Hashimoto, Patrícia Kazuyo. "Complexos de Mn(II) e Fe(II) coordenados a bases de Schiff Bidentadas derivadas de cicloalquilaminas como mediadores da OMRP de acetato de vinila /." Presidente Prudente, 2018. http://hdl.handle.net/11449/154400.
Повний текст джерелаCoorientador: Valdemiro Pereira de Carvalho Júnior
Banca: Pedro Ivo da Silva Maia
Banca: Ana Maria Pires
Resumo: Nas últimas décadas, a polimerização radicalar controlada (CRP) tem se tornado muito importante, pois permite a síntese de macromoléculas de arquiteturas específicas com um controle sobre as propriedades químicas e físicas. Sendo assim, este trabalho apresenta a síntese de novos complexos de Mn(II) e Fe(II) coordenados à ligantes bases de Schiff bidentados, que são resultantes da condensação do salicilaldeído com as seguintes cicloalquilaminas: (1) Ciclopentilamina, (2) Cicloexilamina, (3) Cicloeptilamina e (4) Ciclooctilamina, de forma que estes possam ser utilizados como mediadores da polimerização radicalar mediada por organometálicos. Os ligantes foram caracterizados pelas seguintes técnicas: espectroscopia de ressonância magnética nuclear de hidrogênio (RMN de 1H), espectroscopia de absorção na região do ultravioleta-visível (UV-Vis) e espectroscopia vibracional na região do infravermelho (FTIR). Já os complexos de Mn(II) e Fe(II) foram caracterizados pelas técnicas de FTIR, UV-Vis, voltametria cíclica (VC) e ponto de fusão (p.f.). Os estudos cinéticos de polimerização foram realizados para os complexos de manganês e ferro. O complexo [MnIIbis(N-Salicilideno-Ciclopentilamina)], Mn(L1)2, apresentou um melhor controle na polimerização do acetato de vinila com menores valores de polidispersidade e a curva de massa molecular (Mn) mais próxima aos valores da curva teórica. Já os complexos de ferro mediadores apresentaram um comportamento mais similar, não havendo muita...
Abstract: In the last decades, controlled radical polymerization (CRP) has become very important, since it facilitates the synthesis of macromolecules of specific architectures with excellent control over the chemical and physical properties. Thus, this work presents the synthesis of new Mn(II) and Fe(II) complexes coordinated with the bidentate Schiff bases ligands, which are the result of the condensation of salicylaldehyde with cycloalkylamines: (1) cyclopentylamine, (2) cyclohexylamine, (3) cycloheptylamine and (4) cyclooctylamine, so that they can be used as mediators of radical polymerization mediated by organometallic (OMRP). The ligands synthesized were characterized by proton nuclear magnetic resonance (1H-NMR) spectroscopy, ultraviolet-visible (UV-Vis) absorption spectroscopy and Fourier-transform infrared spectroscopy (FTIR) techniques. The synthesized Mn(II) and Fe(II) complexes were studied by FTIR, UV-Vis, cyclic voltammetry (CV) and melting point (m.p.). Kinetic polymerization studies were performed for the manganese and iron complexes. The [MnIIbis (N-Salicylidene-Cyclopentylamine)], Mn(L1)2, complex showed a better control in the polymerization of vinyl acetate with lower values of polydispersity and the molecular mass curve (Mn) closer to the values of the theoretical curve. However, the iron mediator complexes presented a more similar behavior, not having much difference in the kinetic curves
Mestre
Raihane, Mustapha. "Copolymérisation du méthyl cyanure de vinylidène (MVCN) avec l'acétate de vinyle et des styrènes substitués : synthèses, microstructures, propriétés et dégradation thermique." Saint-Etienne, 1993. http://www.theses.fr/1993STET4017.
Повний текст джерелаFranco, Cilene Meinberg. "Pesquisa experimental sobre a polimerização via radical livre com iniciadores mono e difuncional." [s.n.], 2006. http://repositorio.unicamp.br/jspui/handle/REPOSIP/266156.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas. Faculdade de Engenharia Quimica
Made available in DSpace on 2018-08-07T07:49:45Z (GMT). No. of bitstreams: 1 Franco_CileneMeinberg_M.pdf: 1835289 bytes, checksum: 8c7c34fee69d338538caffa2e9546741 (MD5) Previous issue date: 2006
Resumo: Iniciadores mono funcionais são largamente utilizados em polimerizações VIa radical livre. Muitas vezes, na busca de maiores produtividades, utilizam-se temperaturas de operação mais elevadas e/ou maiores concentrações iniciais de iniciador, que por conseqüência, geram polímeros com pesos moleculares mais baixos. O uso de iniciadores difuncionais permite o aumento da produtividade sem a redução no peso molecular do produto final, o que pode ser urna característica desejável. A pesquisa com iniciadores difuncionais é atual e de grande interesse industrial. O objetivo deste trabalho é analisar o efeito da funcionalidade do iniciador, no caso mono e difuncional, sobre a polimerização via radical livre, considerando corno caso estudo um polímero linear, o poliestireno, e um ramificado, o poli (acetato de vinila). Para isso, foram feitas, experimentalmente, reações de polimerização em ampolas de vidro (polimerização em massa), com o iniciador mono funcional (Luperox TBEC) e o di funcional (Luperox 531). Foram analisados também o efeito da temperatura de polimerização e a concentração de iniciador. Também neste trabalho é apresentado um estudo estatístico através de um Planejamento Fatorial, a fim de analisar o efeito das variáveis temperatura e concentração de iniciador na polimerização do estireno com iniciador difuncional. Observou-se, tanto para o estireno corno para o acetato de vinila, que quando utilizado o iniciador difuncional é possível obter conversões maiores, sem alterar o peso molecular médio mássico e numérico, sendo que em alguns casos pode se até obter um aumento no peso molecular. O uso de iniciador di funcional é também mais viável economicamente, pois apresenta melhores resultados frente ao monofuncional, mesmo quando utilizado em concentrações ou temperaturas menores do que as utilizadas com o iniciador mono funcional. É importante salientar o caráter inovador desta pesquisa, já que não foram encontrados, em literatura aberta, dados experimentais da polimerização do acetato de vinila (ou outro monômero que produza ramificações de cadeia longa) utilizando iniciadores difuncionais
Abstract: Monofunctional initiators are extensively utilized in free radical polymerization. In order to increase productivity, higher temperature or higher initial initiator concentration are used, therefore polymers with lower molecular weights are obtained. Bifunctional initiators increase the polymerization rate without decreasing the average molecular weight and this can be desirable. They are an important issue to be investigated and are of great interest to industries. The objective of this work is to analyze the effect of the functionality of the initiator, by using mono and bifunctional, in free radical polymerization, for linear polymer (poly styrene) and branched polymer (poly(vinyl acetate)). Polymerizations were experimentally performed in glass ampoules (bulk polymerization) using both mono(Luperox TBEC) and bi- (Luperox 531) functional initiators. The effects of temperature and initiator concentration were also analyzed for various polymerization conditions. This work includes a statistical study using the factorial design to analyze the effect of temperature and initiator concentration in styrene polymerization with bifunctional initiator. It is observed in this study, that high conversions with no effect in the molecular weigh of the dead polymer can be achieved using bifunctional initiators in the polymerization of styrene and vinyl acetate. In many cases, it is possible to obtain higher molecular weights. Bifunctional initiator can also be used to provide reduction costs to initiators. They showed better results than the monofunctional initiator when lower concentration or temperature lower were utilized.
Mestrado
Desenvolvimento de Processos Químicos
Mestre em Engenharia Química
Carvalho, Antônio Carlos Sallarés de Mattos. "Desenvolvimento de processo contínuo de copolimerização em emulsão em reator tubular." Universidade de São Paulo, 2008. http://www.teses.usp.br/teses/disponiveis/3/3137/tde-02062008-135006/.
Повний текст джерелаIndustrial emulsion polymerization processes are usually performed in batch or semi-batch stirred tanks, or in continuous stirred tank reactors (CSTR). Continuous reactors have the advantage of being smaller and providing a better product quality control by the reduction of the batch-to-batch variations. In addition, periodical self-sustained oscillations in monomer conversion and in particle size that are usually observed in CSTR can be minimized in tubular reactors presenting good radial mixing. Such conditions can be achieved in tubular reactors by using adequate static mixing devices combined with pulsed (oscillatory) flow. The aim of this work is to report the development of a continuous emulsion copolymerization of vinyl acetate and butyl acrylate performed in a pulsed sieve plate column (PSPC). In order to improve its operational flexibility, the column is composed of five sections, each one presenting independent lateral feed and temperature controls. Depending on the monomer feeding strategy, a composition drift can be noticed during the emulsion copolymerization process of vinyl acetate and butyl acrylate, due to the large differences in reactivity ratios and aqueous phase solubility between these monomers. In this case, the PSPC provides different operational feeding possibilities which allow controlling the copolymer composition by feeding the more reactive monomer along the column. For this reason, in this study the effect of the number of lateral feed streams on the polymer properties was evaluated. Different numbers of lateral monomer feed streams were employed in the experimental runs. Differences in the uniformity of the copolymer composition can be noticed along the reactor depending on the number of lateral feed streams applied in each test. In order to allow temperature variations, during each reaction only the inlet temperature of the cooling jackets was fixed. A developed mathematical model based on the axially dispersed plug-flow model was used to simulate the reactions. In the present study the energy balance was included in the mathematical model so that the influence of different temperature profiles could be taken into account. The effect of lateral monomer feed streams over the copolymer properties could be predicted with sufficient accuracy by model simulations which were also validated by the experimental results. Based on mathematical simulations, an optimal feeding profile could be calculated and experimentally applied in the PSPC allowing the production of a more homogeneous copolymer. The results also permitted the validation of the mathematical model as a reliable tool in the prediction of experimental runs. Furthermore, the advantages of the PSPC could be verified by its adequate performance as a tubular reactor for continuous emulsion copolymerization processes. Finally, the results indicate the possibility of further improvements in other polymer properties by employing different temperature and feeding profiles of other reagents along the column.
Auden, Noel Geraint. "Ethylene-vinyl acetate copolymers." Thesis, Lancaster University, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.239046.
Повний текст джерелаMorin, Aurélie. "Controlled radical polymerization of vinyl esters and vinyl amides : experimental and theoretical studies." Thesis, Toulouse, INPT, 2013. http://www.theses.fr/2013INPT0117/document.
Повний текст джерелаThis thesis focus on Controlled Radical Polymerization (CRP) of vinyl esters and vinyl amides. One of the possibilities to achieve this control is a dynamic reversible trapping of the growing radical chains (P•) by a controlling agent (T) to form a dormant species (P─T’). The radical concentration in the medium can be dramatically reduced so that the unwanted terminations are disfavored and polymers with controlled molecular weights and low dispersity can be obtained. A way to achieve this control is the use of metallic complexes, which can oxidize and form a metal-carbon bond, as trapping agent in the so-called Organometallic Mediated Radical Polymerization (OMRP). So far, different transition metals have been used with gretaer or smaller success. In this study, the synthesis of copper(I) complexes and their investigation for the vinyl acetate and ethylene polymerization under OMRP conditions were performed. We also used computational chemistry as a tool to better understand why the cobalt(II) acetylacetonate (Co(acac)2) has, so far, given the best results for either vinyl acetate or vinyl amides polymerization. Thanks to Density Functional Theory (DFT), the crucial role of the monomer carbonyl group coordination to cobalt was pointed out
Bergerbit, Cédric. "RAFT polymerization of ethylene for the synthesis of polar-apolar olefin block copolymers." Thesis, Lyon, 2019. https://n2t.net/ark:/47881/m6s181w9.
Повний текст джерелаThe synthesis of polar-apolar olefin block copolymers, combining a semi-crystalline polyethylene (PE) block and a polar block (poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA), poly(ethylene oxide) (PEO)) was investigated by RAFT polymerization. A preliminary study on ethylene homopolymerization revealed parasite cross-termination reactions happening at the intermediate radical, resulting in the loss of chain-end fidelity when using aromatic xanthates as chain transfer agents (CTA) under relative mild conditions (T = 70 – 80 °C, P = 200 bar). The extent of cross-termination was greatly reduced with aromatic dithiocarbamates, and for the first time, PE chains with a high livingness were obtained. These first results were used to equip polar macromolecular CTAs (PVAc, PMMA, PEO), with selected aromatic xanthates and dithiocarbamates, that were further used for block copolymerization with ethylene in a low-transferring organic solvent (dimethyl carbonate, DMC). A critical influence of the ethylene pressure was evidenced as block polymerization at 200 bar could not be achieved due to solubility issues in the resulting supercritical DMC/ethylene mixture. This was circumvented by performing the block copolymerization below the supercritical point of the mixture (P < 100 bar) and well-defined PVAc-b-PE, PMMA-b-PE and PEO-b-PE copolymers were eventually obtained. The block copolymers were found to feature self-assembly properties and worm-like morphologies were observed for PMMA-b-PE and PEO-b-PE synthesized in DMC, hinting at a plausible polymerization-induced self-assembly (PISA) mechanism. The successful switch from DMC to water for the synthesis of PEO-b-PE copolymers enabled the observation of various particle morphologies: spheres, vesicles and ellipsoidal particles, depending on the initial macro-CTA:initiator molar ratio
De, Bruyn Hank. "The Emulsion Polymerization of Vinyl Acetate." Thesis, The University of Sydney, 1999. http://hdl.handle.net/2123/381.
Повний текст джерелаDe, Bruyn Hank. "The Emulsion Polymerization of Vinyl Acetate." University of Sydney, Chemistry, 1999. http://hdl.handle.net/2123/381.
Повний текст джерелаCroot, Robert Arthur. "The characterisation and adsorption of vinyl alcohol vinyl acetate copolymers." Thesis, University of Bristol, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.303767.
Повний текст джерелаZarrouki, Arthur. "Synthèse de polymères à base d'éthylène pour additiver les carburants." Thesis, Lyon, 2017. http://www.theses.fr/2017LYSE1039.
Повний текст джерелаThe additivation of diesel fuels allows operating engines at low temperatures without filter blocking and thus fulfilling legal requirements. Ethylene based copolymers such as ethylene-vinyl acetate copolymers, made by free radical polymerization at high pressure (above 2000 bars) and high temperature (above 200 °C) are frequently used as middle distillate cold flow improvers (MDFI). A new free radical copolymerization process of ethylene and vinyl acetate in organic solvent media has been developed. This process gives access to polymers close to commercial MDFI additives under tremendous less drastic conditions (under 250 bars of ethylene and 70 °C). Thanks to this process, a wide diversity (variation of the nature of the polar unit, of polymer architecture…) of ethylene based polymers was obtained. Moreover, EVA model copolymers have been synthesized by metathesis. Thanks to these numerous and diverse ethylene based polymers combined with thermal analysis and X-ray scattering studies a better understanding of the operating mode of these additives in a diesel fuel has been achieved. The structural characteristics of the polymers enabling their effectiveness as diesel fuel cold flow improvers have also been established
Alencar, Ana Ellen Valentim de. "Estudo das propriedades do cimento asfÃltico de petrÃleo modificado por copolÃmero de etileno e acetato de vinila(eva)." Universidade Federal do CearÃ, 2005. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=1439.
Повний текст джерелаCimento AsfÃltico de PetrÃleo (CAP), caracterizado como CAP 50/60, oriundo do Campo Fazenda Alegre, no estado do EspÃrito Santo, foi modificado por adiÃÃo de CopolÃmero de Etileno e Acetato de Vinila (EVA). Na modificaÃÃo foram incorporadas amostras do copolÃmero EVA puro e proveniente do resÃduo da indÃstria de calÃados (EVAR). Os CAPS, polÃmeros e CAPS modificados, foram inicialmente caracterizados por espectroscopia no infravermelho (FTIR) e ressonÃncia magnÃtica nuclear (RMN). AnÃlise tÃrmica, como a termogravimetria (TG) e caloria exploratÃria diferencial (DSC), foi utilizada para o estudo da decomposiÃÃo tÃrmica, bem como para avaliar a estabilidade termoxidativa das amostras. Testes empÃricos como penetraÃÃo, ponto de amolecimento, susceptibilidade tÃrmica e retorno elÃstico, alÃm de viscosidade, tambÃm foram realizados para caracterizaÃÃo dos materiais. Os resultados indicaram que CAPS modificados apresentaram maior estabilidade em atmosfera oxidativa do que em atmosfera inerte. A anÃlise das curvas DSC revelou que os CAPS modificados mostraram-se mais resistentes à trincas tÃrmicas, quando submetidos a temperaturas mais baixas, que o CAP convencional. Os CAPS modificados foram mais resistentes à decomposiÃÃo oxidativa, quando foram submetidos ao envelhecimento simulado. A viscosidade do ligante modificado por adiÃÃo do polÃmero foi aumentada em relaÃÃo ao ligante puro. Diferentemente do CAP convencional, o CAP modificado por EVAR apresentou comportamento nÃo Newtoniano. Os ensaios empÃricos, relativos à penetraÃÃo, ponto de amolecimento, susceptibilidade tÃrmica e retorno elÃstico, mostraram que os CAPS modificados com EVAR, tiveram uma melhoria nas suas propriedades fÃsicas, em relaÃÃo aos CAPS nÃo modificados.
The Petroleum Asphaltic Cement characterized as CAP 50/60, produced at the state of EspÃrito Santo (Fazenda Alegre), was modified by addition of copolymers of ethylene vinyl acetate (EVA) and EVA from the footwearâs industry residue (EVAR). The original and modified CAPS were characterized by infrared spectroscopy (FTIR) and nuclear magnetic resonance (RMN). Thermal analysis,as thermogravimetry (TG) and differential scanning calorimetry (DSC), was used to evaluate the thermal stability of the samples. The characterization was also performed with empirical tests such as penetration, softening point, elastic recovery and viscosity. The main results indicated that polymer modified CAPS presented larger thermal stability in oxidative atmosphere than in inert atmosphere. The analysis of DSC curves revealed that modified CAPS, when submitted to lower temperatures, were more resistant to the thermal cracks than conventional CAP. Also modified CAPS showed to be more resistant to the thermal oxidative decomposition, when submitted to a simulated aging process. The viscosity of the polymer modified binder was increased in relation to the original binder. Polymer modified CAP EVAR presented non-Newtonian behavior, whereas Newtonian behavior was observed for unmodified CAP. It was observed that modifying the asphalt binder with a copolymer EVAR leads to an improvement in the physical properties in relation to the penetration, softening point, thermal susceptibility and elastic recovery
Clough, Norman E. "Thermodynamics of ethylene-vinyl acetate copolymer blends." Thesis, Durham University, 1994. http://etheses.dur.ac.uk/5489/.
Повний текст джерелаTongcher, Oychai. "Novel routes to stereoregular poly(vinyl acetate)." Thesis, University of Cambridge, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.620688.
Повний текст джерелаOliveira, Mauricio Pinheiro de. "Síntesse de novos estabilizantes poliméricos do tipo poli(álcool vinilico-co-neo decanoato de vinila) para utilização na copolimerização em miniemulsão do acetato de vinila (VAc) com o neo-nonanoato de vinila (VEOVA-9)." Universidade de São Paulo, 2010. http://www.teses.usp.br/teses/disponiveis/97/97133/tde-04102012-120438/.
Повний текст джерелаDue to the technological and industrial importance of latexes stabilized with poly(vinyl alcohol)/PVA and the difficulties related to the emulsion polymerization of hydrophobic monomers and the use of PVA having a high degree of hydrolysis (> 92%), the synthesis of new PVA based polymeric stabilizers for use in emulsion and miniemulsion polymerizations becomes very attractive and challenging. The aim of this work was to synthesize a new class of polymeric stabilizer, poly(vinyl alcohol-co-vinyl neo-decanoate)/PVA-VV, with a high degree of hydrolysis and differentiated properties to be used as stabilizers in the emulsion and miniemulsion copolymerization of vinyl acetate (VAc) with vinyl neo-nonanoate (VEOVA-9), that can be used as adhesive for wood bonding. New PVA based polymeric stabilizers with high degree of hydrolysis (94 - 98%) were synthesized in two steps: i) solution copolymerization of vinyl acetate (VAc) with vinyl neo-decanoate (VEOVA-10) and ii) alkaline hydrolysis (NaOH/Methanol) of poly(vinyl acetate-co-vinyl neodecanoate). Miniemulsions of VAc/VEOVA-9 were prepared using the different polymeric stabilizers in a \"Manton Gaulin\" high pressure homogenizer. The effect of different initiators (ammonium persulfate/APS or tert-butyl hydro peroxide/TBHP and tert-butyl peroxide benzoate/TBPB in the presence of sodium formaldehyde sulfoxylate/SFS) in the polymerization kinetic was evaluated. The effect of the type and concentration of polymeric stabilizer, in the emulsification step (average diameter of drops, stability of miniemulsions) as well in the polymerizations (rate of consumption of monomers, particle size and particles number) was investigated in this work. The partition of the polymeric stabilizers between the aqueous phase and the polymer particle surface (grafted/adsorbed) was determined and correlated with the viscosity and colloidal stability of latexes. Latexes with differentiated properties such as low-viscosity, lower grits content and improved storage stability, were obtained by miniemulsion polymerization with an ideal condition copy (1:1) of the monomer droplets to the polymer particles.
Cauich-Rodriguez, Juan Valerio. "Hydrogels based on poly(vinyl alcohol-vinyl acetate) blends for biomedical applications." Thesis, Queen Mary, University of London, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.267577.
Повний текст джерелаCazotti, Jaime Caetano. "Síntese e caracterização de látices híbridos de poli(acetato de vinila)/montmorilonita - PVAc/MMT para aplicação como adesivos." Universidade de São Paulo, 2011. http://www.teses.usp.br/teses/disponiveis/97/97136/tde-27082013-103950/.
Повний текст джерелаThe goal of this project was the preparation of hybrids latexes constituted by poly(vinyl acetate) (PVAc) and montmorillonite (MMT) clays. The poly(vinyl acetate) homopolymer was synthesized via emulsion polymerization in the presence of different types of clay, one sodium clay (Na-MMT) and organically modified clays (o-MMT) with different ammonium quaternary salts. Poly(vinyl alcohol) (PVOH) was used as protective colloid and ammonium persulfate (APS) as initiator. It was evaluated the best condition for the incorporation of the clay in the polymeric matrix, looking forward the exfoliation of the nanofiller, resulting in the formation of nanocomposites with new and improved properties. The influence of clay type and loading was evaluated in terms of latex stability and monomer consumption rate. The latexes were characterized in terms of particle size diameter and polydispersity by light scattering (LS) technique. Coagulum content was determined by gravimetric analysis and viscosity was analyzed in a rotational viscometer. Nanocomposite films were characterized by dynamic-mechanical analysis (DMA), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). Latex particles morphology was evaluated by transmission electron microscopy (TEM).
Kumar, Dheeraj. "Synthesis of vinyl acetate on palladium-based catalysts." [College Station, Tex. : Texas A&M University, 2006. http://hdl.handle.net/1969.1/ETD-TAMU-1747.
Повний текст джерелаHatzinikolaou, Theodosios A. "Adhesion of ethylene vinyl acetate copolymers to metals." Thesis, University of Bath, 1985. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.355114.
Повний текст джерелаHaley, Roger David. "Surface chemistry of the vinyl acetate catalytic system." Thesis, University of Cambridge, 1999. https://www.repository.cam.ac.uk/handle/1810/272089.
Повний текст джерелаEdakkara, A. J., J. J. Mathen, J. Sebastian, G. Ramalingam, and G. P. Joseph. "Electrical Behaviour of Polyethylene Vinyl Acetate / ZnO Nanocomposite." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35634.
Повний текст джерелаCastanharo, Jacira Aparecida. "Preparação de microesferas poliméricas à base de estireno, acetato de vinila e divinilbenzeno com propriedades magnéticas." Universidade do Estado do Rio de Janeiro, 2011. http://www.bdtd.uerj.br/tde_busca/arquivo.php?codArquivo=2712.
Повний текст джерелаMicroesferas poliméricas magnéticas à base de estireno (STY), divinilbenzeno (DVB), acetato de vinila (VAc) e ferro foram preparadas via polimerização em suspensão e semissuspensão. Foram estudadas as influências da concentração de VAc adicionado na polimerização e a presença de ferro sobre as características das partículas poliméricas obtidas. Estas partículas foram caracterizadas por espectrometria de absorção na região do infravermelho (FT-IR), análise térmica (TGA/DTA), microscopia óptica (MO), microscopia eletrônica de varredura (SEM) e magnetometria de amostra vibrante (VSM). Foram obtidas com sucesso microesferas poliméricas com propriedades magnéticas à base de estireno, divinilbenzeno e acetato de vinila. Estes materiais apresentaram bom controle morfológico, com maior rendimento na faixa de 120 a 75 m. Apresentaram também boas propriedades magnéticas (22,62 a 73,75 emu/g) com comportamento próximo de materiais superparamagnéticos e boa estabilidade térmica (444 C)
Magnetic polymeric microspheres based on styrene (STY), divinylbenzene (DVB), ethylene vinyl acetate (VAc) and iron were prepared via suspension and half suspension polymerization. The influence of the concentration of VAc and iron added to the polymerization on the characteristics of polymeric particles obtained were studied. These particles were characterized by infrared spectrometry (FT-IR), thermal analysis (TGA / DTA), optical microscopy (OM), scanning electron microscopy (SEM) and vibrating sample magnetometry (VSM). Polymeric microspheres with magnetic properties based on styrene, divinylbenzene and vinyl acetate were obtained. These materials showed good morphological control and large yield range from 120 to 75 micrometers. They also showed comparable magnetic properties (from 22.62 to 73.75 emu/g) to superparamagnetic materials and good thermal stability (444 C)
Mathen, J. J., A. J. Augustine, J. Sebastian, J. Madhavan, and G. P. Joseph. "Synthesis and Characterization of Polyethylene Vinyl Acetate / ZnSe Nanocomposite." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35635.
Повний текст джерелаWood, Timothy John. "An adsorption study of vinyl alcohol/vinyl acetate copolymers on polystyrene by quartz microbalance." Thesis, University of Bristol, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.261278.
Повний текст джерелаNare, Keith Dumisani. "Formulation development and thermorheological properties of crumb rubber/eva modified bitumen." Thesis, Nelson Mandela Metropolitan University, 2016. http://hdl.handle.net/10948/11974.
Повний текст джерелаIldefonso, Jesner Sereni. "Análise da viabilidade técnica da utilização do copolímero etileno acetato de vinila (EVA) descartado pela indústria calçadista em misturas asfálticas (processo seco)." Universidade de São Paulo, 2007. http://www.teses.usp.br/teses/disponiveis/18/18143/tde-13032007-112426/.
Повний текст джерелаThe main purpose of the present master thesis was to analyze the behavior of modified hot-mix asphalt, through the dry process, with the copolymer ethylene vinyl acetate (EVA) discarded by the footwear industry. Since the EVA characteristics, it is believed that it can improve hot-mix asphalt mechanic characteristics and the wear and tear resistance. Most of the researchers have been addressing efforts in studies on modified hot-mix asphalt by the wet process, however, due to the nature of the solid residue analyzed in this work, the dry process will demand less energy for not needing of grinding. The research evolved the study of samples of asphalt mixtures not aged and with aging of two and four hours in oven, submitted to indirect tension test, resilient modulus, static and dynamic creep, fatigue life and loss due to abrasion (Cantabro test). The results show that the use of this residue increased the resistance of the mixtures to the fatigue and loss of mass due to abrasion, however the mixtures became more susceptible to the permanent deformation. The short-time aging was shown important, because it increased the resistance of the mixtures to the fatigue and the permanent deformation.
Bailly, Nathalie. "N-vinylpyrrolidone-vinyl acetate block copolymers as drug delivery vehicles." Thesis, Stellenbosch : Stellenbosch University, 2012. http://hdl.handle.net/10019.1/20133.
Повний текст джерелаENGLISH ABSTRACT: The primary aim of this study was to investigate the feasibility of the amphiphilic block copolymer poly((vinylpyrrolidone)-b-poly(vinyl acetate)) (PVP-b-PVAc) as a vehicle for hydrophobic anti-cancer drugs. PVP-b-PVAc block copolymers of constant hydrophilic PVP block length and varying hydrophobic PVAc block lengths were synthesized via xanthate-mediated controlled radical polymerization (CRP). The methodology consisted of growing the PVAc chain from a xanthate end-functional PVP. In an aqueous environment the amphiphilic block copolymers selfassembled into spherical vesicle-like structures consisting of a hydrophobic PVAc bilayer membrane, a hydrophilic PVP corona and an aqueous core. The self-assembly behaviour and the physicochemical properties of the self-assembled structures were investigated by 1H NMR spectroscopy, fluorescence spectroscopy, transmission electron microscopy (TEM) and dynamic and static light scattering. Drug loading studies were performed using a model hydrophobic drug, clofazimine, and a common anti-cancer drug paclitaxel (PTX) to evaluate the potential of the PVP-b-PVAc block copolymers for drug delivery,. Clofazimine and PTX were physically entrapped into the hydrophobic domain of the self-assembled PVP-b-PVAc block copolymers via the dialysis method. The drug-loaded PVP-b-PVAc block copolymers were characterized regarding particle size, morphology, stability and drug loading capacity in order to assess their feasibility as a drug vehicle. The polymer vesicles had a relatively high drug loading capacity of 20 wt %. The effect of the hydrophobic PVAc block length on the drug loading capacity and encapsulation efficiency were also studied. Drug loading increased with increasing the hydrophobic PVAc block length. The effect of the drug feed ratio of clofazimine and PTX on the drug loading capacity and encapsulation efficiency were also investigated. The optimal formulation for the drug-loaded PVP-b-PVAc was determined and further investigated in vitro. The size stability of the drugloaded PVP-b-PVAc block copolymers was also assessed under physiological conditions (PBS, pH 7.4, 37 °C) and were stable in the absence and presence of serum. PVP-b-PVAc block copolymers were tested in vitro on MDA-MB-231 multi-drug-resistant human breast epithelial cancer cells and normal MCF12A breast epithelial cells to provide evidence of their antitumor efficacy. In vitro cell culture studies revealed that the PVP-b-PVAc drug carrier exhibited no cytotoxicity towards MDA-MB-231 and MCF12A cells, confirming the biocompatibility of the PVP-b-PVAc carrier. In vitro cytotoxicity assays using clofazimine-PVPb- PVAc formulations showed that when MDA-MB-231 cells were exposed to the formulations, an enhanced therapeutic effect was observed compared to the free drug. Cellular internalization of the PVP-b-PVAc drug carrier was demonstrated by fluorescent labeling of the PVP-b-PVAc carrier. Fluorescence microscopy results showed that the carrier was internalized by the MDAMB- 231 cells after 3 hours and localized in the cytoplasm and the perinuclear region. Overall, it was demonstrated that PVP-b-PVAc block copolymers appear to be promising candidates for the delivery of hydrophobic anti-cancer drugs.
AFRIKAANSE OPSOMMING: Die studie is gebaseer op die gebruik van amfifieliese blokkopolimere van poli((Nvinielpirolidoon)- b-poli(vinielasetaat)) (PVP-b-PVAc) as potensiële geneesmiddeldraers. PVP-b-PVAc blokkopolimere van konstante hydrofiliese bloklengte en verskillende hydrofobiese bloklengte is voorberei via die RAFT/MADIX-proses. Blokkopolimere met vinielasetaat is vanaf poli(N-vinielpirolidoon) met ‘n xantaatendfunksie voorberei. In ‘n wateromgewing vorm die PVP-b-PVAc blokkopolimere vesikel strukture met ‘n hydrofobiese membraan en ‘n hydrofiliese mantel. Die fisies-chemiese eienskappe van die PVP-b-PVAc blokkopolimere is gekarakteriseerd met gebruik van KMR spektroskopie, fluoresent spektroskopie, transmissie elektronmikroskopie (TEM) en dinamiese en statiese lig verstrooiing. Die potensiaal van PVP-b-PVAc as ‘n geneesmiddeldraer is ondersoek deur gebruik te maak van die hydrofobiese geneesmiddel, clofazimine, en ‘n anti-kanker geneesmiddel, paclitaxel. Clofazimine en paclitaxel is ge-inkapsuleer in die hydrofobiese gedeelte van die blokkopolimere via die dialise-metode. Clofazimine-PVP-b-PVAc en paclitaxel-PVPb- PVAc blokkopolimere is gekarakteriseerd met betrekking tot die partikel grootte, morfologie, stabiliteit en laai kapasitiet om die PVP-b-PVAc blokkopolimere as geneesmiddeldraers te evalueer. Die PVP-b-PVAc geneesmiddeldraer het ‘n relatiewe hoë laai kapsiteit van 20 gew % aangetoon. Die invloed van die bloklengte op die laai kapasitiet is ook ondersoek en beskryf. ‘n Toename in die laai kapasitiet is gesien met ‘n toename in die hydrofobiese bloklengte. Die invloed van die hoeveelheid geneesmiddel op die laai kapasitiet en die inkapsuleer doeltreffendheid is ook ondersoek. Die optimale formulasie is gevind en verder gebruik vir in vitro studies. Die stabiliteit van die geneesmiddeldraer in fisiologiese omstandighede (pH 7.4, 37 °C) is ook beskryf. Resultate toon aan dat die sisteem stabiel is onder hierdie omstandighede in die afwesigheid en aanwesigheid van serum. In vitro eksperimente is op MCF12A epiteel-borsselle en MDA-MB-231 epiteelborskankerselle getoets om die anti-tumoraktiwiteit te ondersoek. Resultate toon aan dat die PVP-b-PVAc geen sitotoxiese effek op die selle het nie, wat aandui dat die polimere bioverenigbaar is. Verder is dit bewys dat die PVP-b-PVAc geneesmiddel formualsie ’n hoër sitotoxisiteit besit as die vry-geneesmiddel. Fluoresent studies het aangetoon dat die geneesmiddeldraer na 3 uur opgeneen word deur MDA-MB231 selle en gelokaliseerd is in die sitoplasma en in die omgewing van die kern van die selle. In die algemeen is dit aangetoon dat PVP-b-PVAc blokkopolimere potensiële kandidate vir die lewering van hydrofobiese geneesmiddels is.
Guo, Haochen. "RECYCLING THERMOPLASTIC EVA (POLYETHYLENE-CO-VINYL ACETATE) WITH IMPROVED PROPERTIES." Case Western Reserve University School of Graduate Studies / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=case1585673886043802.
Повний текст джерелаJovanovic, Renata. "Butyl acrylate/vinyl acetate emulsion copolymerization: Reaction monitoring and property evaluation." Thesis, University of Ottawa (Canada), 2001. http://hdl.handle.net/10393/9102.
Повний текст джерелаOkpe, Owoicho. "Alumina trihydrate as a fire retardant for ethylene vinyl acetate copolymer." Thesis, University of Manchester, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.339740.
Повний текст джерелаKhan, Shadeed. "Controlled Release of Fluoride from Poly(ethylene-co-vinyl acetate) Films." VCU Scholars Compass, 2009. http://scholarscompass.vcu.edu/etd/1928.
Повний текст джерелаYao, Hongyang. "Microstructures of poly(vinyl acetate) studied by nuclear magnetic resonance spectroscopy." W&M ScholarWorks, 1997. https://scholarworks.wm.edu/etd/1539623911.
Повний текст джерелаBambalaza, Sonwabo Elvis. "An investigation into the use of a ceramifiable Ethylene Vinyl Acetate (EVA) co-polymer formulation to aid flame retardency in electrical cables." Thesis, Nelson Mandela Metropolitan University, 2014. http://hdl.handle.net/10948/d1020159.
Повний текст джерелаLake, Richard Charles. "The identification of the fouling mechanism during the crossflow filtration of a model fermentation broth." Thesis, University of Surrey, 1996. http://epubs.surrey.ac.uk/842774/.
Повний текст джерелаLanger, Filip. "Vliv okolních podmínek na recyklaci solárních modulů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442429.
Повний текст джерелаOghide, Godwin O. "Miscibility studies of poly (methyl acrylate) poly (vinyl acetate) and poly (vinyl acetate)/ poly (vinylidene fluoride) blends using differential scanning calorimetry and fourier transform infra red spectroscopy." DigitalCommons@Robert W. Woodruff Library, Atlanta University Center, 1985. http://digitalcommons.auctr.edu/dissertations/3294.
Повний текст джерелаPoormahdian, Saïd. "Emulsion copolymerization of vinyl acetate and butyl acrylate in a tubular reactor." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0028/NQ48892.pdf.
Повний текст джерелаOlsen, Donald Grant. "A study in plantwide control of a vinyl acetate monomer process design." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp05/MQ65065.pdf.
Повний текст джерелаLange, Hanna. "Emulsion polymerization of vinyl acetate with renewable raw materials as protective colloids." Thesis, KTH, Skolan för kemivetenskap (CHE), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-41019.
Повний текст джерелаRocha, Beatriz Aline Riga [UNESP]. "Síntese de ligantes diimínicos para obtenção de complexos organocobalto(III) para polimerização radicalar mediada por cobalto." Universidade Estadual Paulista (UNESP), 2017. http://hdl.handle.net/11449/149815.
Повний текст джерелаApproved for entry into archive by Juliano Benedito Ferreira (julianoferreira@reitoria.unesp.br) on 2017-03-21T16:17:50Z (GMT) No. of bitstreams: 1 rocha_bar_me_sjrp.pdf: 4397938 bytes, checksum: 97cd69af09e5df0e1dcc372a541946c2 (MD5)
Made available in DSpace on 2017-03-21T16:17:50Z (GMT). No. of bitstreams: 1 rocha_bar_me_sjrp.pdf: 4397938 bytes, checksum: 97cd69af09e5df0e1dcc372a541946c2 (MD5) Previous issue date: 2017-02-22
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Neste trabalho objetivou-se a síntese e caracterização de oito complexos de cobalto(II) que fossem aptos a atuarem como agentes controladores na Polimerização Radicalar Mediada por Cobalto do monômero acetato de vinila. Através da modulação da esfera de coordenação destes complexos com a alteração dos efeitos estéricos e eletrônicos promovidos pela coordenação de ligantes α-diiminas, buscou-se estabelecer parâmetros para propor a forma como estes complexos mediam a CMRP do referido monômero. Os complexos foram divididos em dois grupos, objetivando uma avaliação mais eficiente da forma como os efeitos estéricos e eletrônicos interferem na capacidade controladora dos mesmos. Após a variação sistemática das proporções molares entre complexo, iniciador e monômero encontrou-se na proporção [Co]/[AIBN]/[VAc] = 1/3,25/542 os resultados mais satisfatórios deste trabalho. O uso de DMSO fora prejudicial para os complexos 2a-c, porém fez com que os complexos 2d-h apresentassem melhorias, reduzindo seus valores de polidispersidade e aumentando as massas moleculares dos polímeros. O complexo 2b fora escolhido como o melhor controlador do grupo do efeito estérico, por reunir em si as características estérias e eletrônicas que o fizeram apresentar os menores valores de polidispersidade (Đmáx = 1,43). Com relação ao grupo de complexos do efeito eletrônico, fora o complexo 2f que, devido à maior estabilidade estrutural conferida ao complexo por seu substituinte cicloexil, apresentara as menores polidispersidades de seu grupo, entre 1,12 e 1,58.
This work aimed the synthesis and characterization of eight cobalt(II) complexes which could be able to act as controlling agents in vinyl acetate radical polymerization mediated by cobalt. By modulating the coordination sphere of these complexes, modifying the steric and electronic effects offered by the α-diimine ligands, we sought to establish parameters to propose how these complexes mediate the CMRP of vinyl acetate. The complexes were split in two groups in way to assess efficiently how the electronic and steric effects can affect the controlling capacity of the CoII(α-diimine).A systematic variation of the molar ratio such as [Co]/[initiator] and [Co]/[monomer] made it possible to choose [Co]/[initiator]/[monomer] = 1/3.25/542 as the ratio that provided certain level of control. The addition of DMSO was detrimental to the complexes 2a-c, but caused an improvement to the activity of complexes 2dh, reducing their polydispersity values and increasing the molecular weights of the polymers. Complex 2b was chosen as the best controller of the steric effect group, its steric and electronic characteristics made possible to reach the lowest polydispersity of its group (Đmax = 1.43).Regarding to the group of complexes of the electronic effect, it was the complex 2f that had the smallest polydispersity of its group, between 1.12 and 1.58, due to the greater structural stability conferred to the complex by its cyclohexyl substituent.
Ferguson, Christopher James. "Core-shell polymers from styrene and vinyl acetate for use as wood adhesives." Thesis, University of Canterbury. Chemistry, 2000. http://hdl.handle.net/10092/5647.
Повний текст джерелаKhunniteekool, Chonlada. "Structure/property relationships of cross-linked polyethylene and ethylene vinyl acetate copolymer foams." Thesis, University of Manchester, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.390453.
Повний текст джерелаOwens, Thomas Graham. "The promoting role of Au in the Pd-catalysed synthesis of vinyl acetate monomer." Thesis, University of St Andrews, 2007. http://hdl.handle.net/10023/352.
Повний текст джерела