Статті в журналах з теми "Varying temperature hardness"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Varying temperature hardness".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Joshua, T. O., O. S. I. Fayomi, F. H. Olatuja, and A. O. Inegbenebor. "Hardness and Microstructural Behavior of Normalized Steel-Welded Joint under Varying Temperature." Procedia Manufacturing 35 (2019): 1375–82. http://dx.doi.org/10.1016/j.promfg.2019.09.006.
Повний текст джерелаPazur, Richard J., and T. Mengistu. "ACTIVATION ENERGIES OF THERMO-OXIDIZED NITRILE RUBBER COMPOUNDS OF VARYING ACRYLONITRILE CONTENT." Rubber Chemistry and Technology 92, no. 1 (January 1, 2019): 129–51. http://dx.doi.org/10.5254/rct.18.82592.
Повний текст джерелаMahathanabodee, S., Tippaban Palathai, S. Raadnui, Ruangdaj Tongsri, and Narongrit Sombatsompop. "Effect of h-BN Content on the Sintering of SS316L/h-BN Composites." Advanced Materials Research 410 (November 2011): 216–19. http://dx.doi.org/10.4028/www.scientific.net/amr.410.216.
Повний текст джерелаGurumurthy, B. M., Sathya Shankar Sharma, and U. Achutha Kini. "Ferrite-Martensite Dual Phase Treatment of AISI 1040 Steel and Mechanical Characterization." Key Engineering Materials 748 (August 2017): 280–83. http://dx.doi.org/10.4028/www.scientific.net/kem.748.280.
Повний текст джерелаLandgraf, Pierre, Peter Birnbaum, Enrique Meza-García, Thomas Grund, Verena Kräusel, and Thomas Lampke. "Jominy End Quench Test of Martensitic Stainless Steel X30Cr13." Metals 11, no. 7 (July 3, 2021): 1071. http://dx.doi.org/10.3390/met11071071.
Повний текст джерелаRotich, Sammy Kiplangat, Ngetich Gilbert Kipkirui, Tzu-Tang Lin, and Shih-Hsun Chen. "Effect of Varying Plasma Powers on High-Temperature Applications of Plasma-Sprayed Al0.5CoCrFeNi2Ti0.5 Coatings." Materials 15, no. 20 (October 15, 2022): 7198. http://dx.doi.org/10.3390/ma15207198.
Повний текст джерелаRen, Junzhao, Hongyan Wu, Lu Wang, Zhehang Fan, Yanzhao Qiu, Lu Yu, and Enxi Shi. "Molecular Dynamics Simulation of Nanoindentation of Nb-Zr Alloys with Different Zr Content." Metals 12, no. 11 (October 27, 2022): 1820. http://dx.doi.org/10.3390/met12111820.
Повний текст джерелаCai, Gang Yi, Xiao Ting Huang, and Peng Hui Deng. "Effects of Thermomechanical Treatment Process on the Microstructure and Properties of AZ80 Magnesium Alloy." Advanced Materials Research 179-180 (January 2011): 354–58. http://dx.doi.org/10.4028/www.scientific.net/amr.179-180.354.
Повний текст джерелаHuang, Xiao Ting, Gang Yi Cai, and Wen Biao Qiu. "Effects of Hot Deformation Process on the Microstructure and Hardness of AZ80 Magnesium Alloy." Advanced Materials Research 476-478 (February 2012): 46–49. http://dx.doi.org/10.4028/www.scientific.net/amr.476-478.46.
Повний текст джерелаOktadinata, Herry, M. Sa'ban Dafi, and Djoko Hadi Prajitno. "Microstructure Evolution and Hardness Properties of Nodular Cast Iron for Varying Tempering Time." Key Engineering Materials 935 (November 30, 2022): 3–9. http://dx.doi.org/10.4028/p-h1ao57.
Повний текст джерелаZakaria, Marwan, Siti Rodiah Karim, and Nur Azam Badarulzaman. "XRD Analysis of Al-6vol%SnPb Composites Fabricated by Cold Forging Process with Various Sintering Temperatures." Advanced Materials Research 1087 (February 2015): 420–23. http://dx.doi.org/10.4028/www.scientific.net/amr.1087.420.
Повний текст джерелаS, Manivannan, Senthil Kumaran S, Srinivasan Narayanan, Kathiravan Srinivasan, and Alex Noel Joseph Raj. "Sensor-Assisted Assessment of the Tribological Behavioral Patterns of Al–SiCp Composites under Various Environmental Temperature Conditions." Materials 12, no. 23 (December 2, 2019): 4004. http://dx.doi.org/10.3390/ma12234004.
Повний текст джерелаFudger, Sean J., Thomas L. Luckenbaugh, Anthony J. Roberts, Chris D. Haines, and Kris A. Darling. "Tying Processing Parameters to the Microstructure and Mechanical Properties of Nanostructured FeNiZr Consolidated via the Field Assisted Sintering Technique." Metals 9, no. 4 (April 13, 2019): 436. http://dx.doi.org/10.3390/met9040436.
Повний текст джерелаTimelli, Giulio, Alberto Fabrizi, Simone Vezzù, and Alessandro De Mori. "Design of Wear-Resistant Diecast AlSi9Cu3(Fe) Alloys for High-Temperature Components." Metals 10, no. 1 (December 28, 2019): 55. http://dx.doi.org/10.3390/met10010055.
Повний текст джерелаAzeez, T. M., Lateef O. Mudashiru, T. B. Asafa, A. A. Adeleke, and Peter Pelumi Ikubanni. "Mechanical Properties of Al 6063 Processed with Equal Channel Angular Extrusion under Varying Process Parameters." International Journal of Engineering Research in Africa 54 (June 2021): 23–32. http://dx.doi.org/10.4028/www.scientific.net/jera.54.23.
Повний текст джерелаAravinda, T., and H. B. Niranjan. "Characterization of Joints Produced by Diffusion Bonding." Journal of Mines, Metals and Fuels 70, no. 5 (July 22, 2022): 258. http://dx.doi.org/10.18311/jmmf/2022/30330.
Повний текст джерелаNahvi, Hamdan Gowhar. "Study for Improvement in the Surface Properties and Wear Behavior of Mild Steel." International Journal for Research in Applied Science and Engineering Technology 9, no. 10 (October 31, 2021): 938–48. http://dx.doi.org/10.22214/ijraset.2021.38538.
Повний текст джерелаIvanov, Alexander M., Anton V. Sadokhin, Nikita B. Strokan, Alexander A. Lebedev, and Vitalii V. Kozlovski. "Radiation Hardness of Wide-Bandgap Materials as Exemplified by SiC Nuclear Radiation Detectors." Materials Science Forum 717-720 (May 2012): 549–52. http://dx.doi.org/10.4028/www.scientific.net/msf.717-720.549.
Повний текст джерелаTeldekov, V. A., and L. M. Gurevich. "RESEARCH OF LOW TEMPERATURE NITROCARBURIZING TECHNOLOGY FOR COMPLEX HARDENING OF MACHINE PARTS." IZVESTIA VOLGOGRAD STATE TECHNICAL UNIVERSITY, no. 10(257) (October 25, 2021): 64–68. http://dx.doi.org/10.35211/1990-5297-2021-10-257-64-68.
Повний текст джерелаRahman, W., Shamsul Baharin Jamaludin, and Mohd Noor Mazlee. "Microwave Sintering of Pure Iron with Addition of Stearic Acid as Binder." Advanced Materials Research 576 (October 2012): 166–69. http://dx.doi.org/10.4028/www.scientific.net/amr.576.166.
Повний текст джерелаMotsai, Tebogo, Elizabeth Makhatha, Sigqibo Camagu, Chris Machio, Pfarelo Daswa, Precious Radingoana, and Glenda Motsi. "The effect of vanadium and nickel on the microstructure and transformation temperatures of Ti50Pt50 alloy." MATEC Web of Conferences 370 (2022): 03004. http://dx.doi.org/10.1051/matecconf/202237003004.
Повний текст джерелаChaus, Alexander S., Róbert Sobota, and Viktor Tittel. "Characterisation of the Microstructure of Plain Carbon Steel Formed during Isothermal and Continuous Cooling Following Austenitisation." Defect and Diffusion Forum 413 (December 17, 2021): 167–73. http://dx.doi.org/10.4028/www.scientific.net/ddf.413.167.
Повний текст джерелаMisra, A., and R. G. Hoagland. "Effects of Elevated Temperature Annealing on the Structure and Hardness of Copper/niobium Nanolayered Films." Journal of Materials Research 20, no. 8 (August 1, 2005): 2046–54. http://dx.doi.org/10.1557/jmr.2005.0250.
Повний текст джерелаKahyaoglu, T., S. Kaya, and A. Kaya. "Effects of Fat Reduction and Curd Dipping Temperature on Viscoelasticity, Texture and Appearance of Gaziantep Cheese." Food Science and Technology International 11, no. 3 (June 2005): 191–98. http://dx.doi.org/10.1177/1082013205055002.
Повний текст джерелаKilic, Mehmet, Dervis Ozkan, Mustafa Sabri Gok, and Abdullah Cahit Karaoglanli. "Room- and high temperature Wear Resistance of MCrAlY Coatings Deposited by Detonation Gun (D-gun) and Supersonic Plasma Spraying (SSPS) Techniques." Coatings 10, no. 11 (November 19, 2020): 1107. http://dx.doi.org/10.3390/coatings10111107.
Повний текст джерелаLiu, Jing Qing, Wei Jiang, Jian Min Wu, and Cong Li. "The Influence of Total Hardness on Chlorine Decay in Water Distribution Systems." Applied Mechanics and Materials 535 (February 2014): 776–84. http://dx.doi.org/10.4028/www.scientific.net/amm.535.776.
Повний текст джерелаMu, Si Guo, Jiao Yan Dai, Yong Ru Wang, Guo Hui Chao, Xi Ping Hong, and Yu Chang Su. "Study on Microstructure and Properties of CuZn37Mn3Al2FeSi Alloy." Advanced Materials Research 287-290 (July 2011): 868–74. http://dx.doi.org/10.4028/www.scientific.net/amr.287-290.868.
Повний текст джерелаNavas, R. Kaja Bantha, A. John Rajan, Udit R. Topno, and Sindiri Chaitanya. "Optimizing the Coating Parameters for Coated Aluminium Alloy 2024 T351 by Using Factor Analysis Method ." Applied Mechanics and Materials 813-814 (November 2015): 608–12. http://dx.doi.org/10.4028/www.scientific.net/amm.813-814.608.
Повний текст джерелаPuspasari, Vinda, Mukhlis Agung Prasetyo, Januarius Velix Ta’an Halab, Moch Syaiful Anwar, Efendi Mabruri, and Satrio Herbirowo. "Pengaruh Annealing terhadap Sifat Keras dan Struktur Mikro Baja Tahan Karat AISI 410-3Mo-3Ni." Metalurgi 35, no. 2 (October 27, 2020): 75. http://dx.doi.org/10.14203/metalurgi.v35i2.560.
Повний текст джерелаEmmrich, Robin, and Ulrich Krupp. "On the Impact of the Intermetallic Fe2Nb Laves Phase on the Mechanical Properties of Fe-6 Al-1.25 Nb-X W/Mo Fully Ferritic Light-Weight Steels." Metals 11, no. 11 (October 24, 2021): 1693. http://dx.doi.org/10.3390/met11111693.
Повний текст джерелаZaheruddin, Kasmuin Mohd, Sri Asliza Md Amin, Azmi B. Rahmat, Shamsul Baharin Jamaludin, and R. A. Khairel. "Sintering Effects on Mechanical Properties of Co-Ha Composite Prepared by Modified Electroless Deposition." Key Engineering Materials 594-595 (December 2013): 255–59. http://dx.doi.org/10.4028/www.scientific.net/kem.594-595.255.
Повний текст джерелаAlisha, S., T. Venkateswaran, M. Amruth, P. Chakravarthy, and D. Sivakumar. "Effect of Heat Treatment on the Mechanical Properties of Copper-Beryllium Alloy (C17200)." Materials Science Forum 830-831 (September 2015): 168–71. http://dx.doi.org/10.4028/www.scientific.net/msf.830-831.168.
Повний текст джерелаAcharya, Palaksha, Ajit Kumar, and Ravishankar Bhat. "Microstructure and wear behavior of austempered high carbon high silicon steel." MATEC Web of Conferences 144 (2018): 02013. http://dx.doi.org/10.1051/matecconf/201814402013.
Повний текст джерелаRUKKUN, Jariyaporn, Kamon AIEMPANAKIT, Pimchanok REAKAUKOT, Witthawat WONGPISAN, Kirati WAREE, and Montri AIEMPANAKIT. "Investigation of deposition parameters on the structural properties and hardness of TiAlN films deposited via reactive pulsed DC magnetron sputteringInvestigation of deposition parameters on structural properties and hardness of TiAlN films deposited by reactive pulsed DC magnetron sputtering." Journal of Metals, Materials and Minerals 31, no. 2 (June 27, 2021): 118–22. http://dx.doi.org/10.55713/jmmm.v31i2.1083.
Повний текст джерелаAdebayo, Abdullahi, Olawale Ajibola, Oluwasegun Falodun, Sunday Borisade, Adebayo Owa, Oluwole Adigun, Akinlabi Oyetunji, and Kenneth Alaneme. "Effects of aluminium addition and austempering temperatures on Al-alloyed ductile iron microstructure and mechanical properties." Acta Metallurgica Slovaca 28, no. 4 (December 13, 2022): 181–87. http://dx.doi.org/10.36547/ams.28.4.1598.
Повний текст джерелаFazily, Piemaan, Jaehyeong Yu, and Chang-Whan Lee. "Characterization of Sheared Edges in Warm Blanking of Magnesium Alloy AZ31B." Materials 12, no. 7 (March 28, 2019): 1023. http://dx.doi.org/10.3390/ma12071023.
Повний текст джерелаKaulfuss, Frank, Volker Weihnacht, Martin Zawischa, Lars Lorenz, Stefan Makowski, Falko Hofmann, and Andreas Leson. "Effect of Energy and Temperature on Tetrahedral Amorphous Carbon Coatings Deposited by Filtered Laser-Arc." Materials 14, no. 9 (April 23, 2021): 2176. http://dx.doi.org/10.3390/ma14092176.
Повний текст джерелаAhmad, Fareed, Mohammed Al Awadh, Muhammad Abas, Sahar Noor, and Asad Hameed. "Optimization of Carbon Fiber Reinforced Plastic Curing Parameters for Aerospace Application." Applied Sciences 12, no. 9 (April 24, 2022): 4307. http://dx.doi.org/10.3390/app12094307.
Повний текст джерелаAhmad, Fareed, Mohammed Al Awadh, Muhammad Abas, Sahar Noor, and Asad Hameed. "Optimization of Carbon Fiber Reinforced Plastic Curing Parameters for Aerospace Application." Applied Sciences 12, no. 9 (April 24, 2022): 4307. http://dx.doi.org/10.3390/app12094307.
Повний текст джерелаN, Lokesh. "Study on Mechanical Properties of hBN Reinforced Al-7075 Metal Matrix Composite." International Journal for Research in Applied Science and Engineering Technology 10, no. 7 (July 31, 2022): 3121–30. http://dx.doi.org/10.22214/ijraset.2022.45693.
Повний текст джерелаSyed Akbar Ali and B.S Motgi. "A Study on Mechanical Properties of Al7068 Based Metal Matrix Composite Reinforced with Rice Husk Ash (RHA) and Silicon Carbide (SiC)." September 2021 7, no. 09 (September 27, 2021): 71–78. http://dx.doi.org/10.46501/10.46501/ijmtst0709012.
Повний текст джерелаDrygaś, Mariusz, Katarzyna Lejda, Jerzy F. Janik, Bogdan Musielak, Stanisław Gierlotka, Svitlana Stelmakh, and Bogdan Pałosz. "Composite Nitride Nanoceramics in the System Titanium Nitride (TiN)-Aluminum Nitride (AlN) through High Pressure and High Temperature Sintering of Synthesis-Mixed Nanocrystalline Powders." Materials 14, no. 3 (January 27, 2021): 588. http://dx.doi.org/10.3390/ma14030588.
Повний текст джерелаFikry, Mohammad, Ibrahim Khalifa, Rokkaya Sami, Ebtihal Khojah, Khadiga Ahmed Ismail, and Mokhtar Dabbour. "Optimization of the Frying Temperature and Time for Preparation of Healthy Falafel Using Air Frying Technology." Foods 10, no. 11 (October 25, 2021): 2567. http://dx.doi.org/10.3390/foods10112567.
Повний текст джерелаAmir, Adibah, and Othman Mamat. "Effects of SiO2 Particles in Mechanical Properties of Iron Composite." Applied Mechanics and Materials 465-466 (December 2013): 886–90. http://dx.doi.org/10.4028/www.scientific.net/amm.465-466.886.
Повний текст джерелаMoosa, Jaafar M., Haider G. Abdulzahraa, Shihab A. Zaidan, and Hafidh Y. Abed. "Reinforcing Glaze Layer of Restorative Dental Zirconia by Adding Nano Alumina Ceramics." NeuroQuantology 19, no. 6 (July 14, 2021): 73–78. http://dx.doi.org/10.14704/nq.2021.19.6.nq21071.
Повний текст джерелаPrasetya, Angga Yunis, Darmanto Darmanto, and Muhammad Dzulfikar. "The Effect of Plasma Nitridation on Surface Hardness of Titanium Alloy (Ti-6Al-4V) for Artificial Knee Joint Applications." Journal of Biomedical Science and Bioengineering 1, no. 2 (January 3, 2022): 49–53. http://dx.doi.org/10.14710/jbiomes.2021.v1i2.49-53.
Повний текст джерелаSuresh, T., P. Sures, and M. Prabu. "Influences of Ag+LiAlO2 on mechanical and high temperature wear behavior of magnesium hybrid composites." Digest Journal of Nanomaterials and Biostructures 17, no. 3 (June 2022): 731–40. http://dx.doi.org/10.15251/djnb.2022.173.731.
Повний текст джерелаMuniandy, Suresh, Ananthan Soosai, and Teow Hsien Loong. "Effect of Sintering Temperature to the Mechanical Properties of Different Filler Loading of Zirconia Powder in Hydroxyapatite Composites." Materials Science Forum 1030 (May 2021): 27–34. http://dx.doi.org/10.4028/www.scientific.net/msf.1030.27.
Повний текст джерелаMallikarjun Nagagonda and B.S Motgi. "Investigation of Microstructure and Mechanical Properties of Hybrid Composite Aluminum 7075 Reinforced with Sugar Cane Husk Ash (SCHA) and Silicon Carbide (SiC) by Powder Metallurgy." September 2021 7, no. 09 (September 27, 2021): 102–9. http://dx.doi.org/10.46501/ijmtst0709017.
Повний текст джерелаZhang, Lin, Yuhang Hou, Xiao Guo, Zhaolong Xiang, and Engang Wang. "Effect of Electromagnetic Stirring on the Microstructure and Properties of Fe-Cr-Co Steel." Materials 11, no. 8 (August 14, 2018): 1437. http://dx.doi.org/10.3390/ma11081437.
Повний текст джерела