Увійти

Готові списки джерел за темами / Vacuum electrical insulation / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Vacuum electrical insulation.

Статті в журналах з теми "Vacuum electrical insulation"

Автор: Grafiati

Опубліковано: 30 травня 2022

Оновлено: 31 травня 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Vacuum electrical insulation".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Yamamoto, O., T. Hara, H. Matsuura, Y. Tanabe, and T. Konishi. "Effects of corrugated insulator on electrical insulation in vacuum." Vacuum 47, no. 6-8 (June 1996): 713–17. http://dx.doi.org/10.1016/0042-207x(96)00054-1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Florkowski, Marek, Jakub Furgał, Maciej Kuniewski, and Piotr Pająk. "Overvoltage Impact on Internal Insulation Systems of Transformers in Electrical Networks with Vacuum Circuit Breakers." Energies 13, no. 23 (December 2, 2020): 6380. http://dx.doi.org/10.3390/en13236380.

Повний текст джерела

Анотація:

Vacuum circuit breakers are increasingly used as switching apparatus in electric power systems. The vacuum circuit breakers (VCBs) have very good operating properties. VCBs are characterized by specific physical phenomena that affect overvoltage exposure of the insulation systems of other devices. The most important phenomena are the ability to chop the current before the natural zero crossing, the ability to switch off high-frequency currents, and the rapid increase in dielectric strength recovery. One of the devices connected directly to vacuum circuit breakers is the distribution transformer. Overvoltages generated in electrical systems during switching off the transformers are a source of internal overvoltages in the windings. The analysis of the exposure of transformers operating in electrical networks equipped with vacuum circuit breakers is of great importance because of the impact on the insulation systems of switching overvoltages (SO). These types of overvoltages can be characterized by high maximum values and atypical waveforms, depending on the phenomena in the circuit breaker chambers, system configuration, parameters of electrical devices, and overvoltage protection. Overvoltages that stress the internal insulation systems are the result of the windings response to overvoltages at transformer terminals. This article presents an analysis of overvoltages that stress the transformer insulation systems, which occur while switching off transformers in systems with vacuum circuit breakers. The analysis was based on the results of laboratory measurements of switching overvoltages at transformer terminals and inside the winding, in a model medium-voltage electrical network with a vacuum circuit breaker.

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Li, Fan, You Ping Tu, Shao He Wang, Chao Zhao, Rong Tan, and Yan Luo. "The Design of Liquid Helium Temperature Zone Temperature Control System Based on G-M Refrigerator." Advanced Materials Research 952 (May 2014): 291–95. http://dx.doi.org/10.4028/www.scientific.net/amr.952.291.

Повний текст джерела

Анотація:

The different low temperature electrical characteristics of insulating materials, which plays an important role in superconducting power equipment, has attracted extensive attention. The cryogenic control system is applied to the independent development of superconducting electrical characteristics of insulating materials testing device. And it is designed on the basis of LabVIEW, for the test of the electrical characteristics of the insulation materials in special environment such as cryogenic temperature and vacuum. The system which uses DC source as a heat source and G-M refrigerator as a cold source, uses PID algorithm to control the heat source with the cold source so as to achieve closed-loop control. The system can make the temperature of sample from room temperature down to 6.0K within three hours and control the temperature of sample in the range of 6.0K-300.0K. The system enables temperature error not more than ± 0.5K for a long time and provides a reliable low-temperature environment which is used for study of the electrical characteristics of the insulation materials in different cryogenic temperature and vacuum environment.

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Roman, O. V., V. T. Shmuradko, F. I. Panteleenko, O. P. Reut, T. I. Bendik, N. A. Shmuradko, L. V. Sudnik, V. I. Borodavko, A. N. Kizimov, and V. V. Klavkina. "Technical ceramics: material science and technology principles and mechanisms for the development and implementation of ceramic electrical insulators for various scientific and practical purposes." NOVYE OGNEUPORY (NEW REFRACTORIES), no. 9 (October 25, 2020): 16–24. http://dx.doi.org/10.17073/1683-4518-2020-9-16-24.

Повний текст джерела

Анотація:

The concept of creating electrical insulating ceramic materialsproducts from powder systems representing oxide and nonoxide chemical compounds was formed; a program document for materials science and technological logistics of physical and chemical transformation of technogenic mineral raw materials into electrical materials-products of various scientific, practical and specific technological purposes was created and implemented. The principal theoretical approach and its appliedpractical aspects of the development - research - creation of thermo- and chemically resistant structural electrical insulation materials - products for various scientific and practical purposes: automatic contact welding of tubular bimetals (for example, copper - aluminum), electron beam welding in vacuum of thickwalled large-sized structures made of high-strength aluminum alloys, high-temperature (1050 oC) hardening of drilling tools in vacuum furnaces in the medium of dissociated acetylene are considered, in electric transmissions of brake installations of quarry dump trucks (k/s) BelAZ.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Zhao, Liang, Jian-Cang Su, Xi-Bo Zhang, Ya-Feng Pan, Rui Li, Bo Zeng, Jie Cheng, Bin-Xiong Yu, and Xiao-Long Wu. "A Method to design composite insulation structures based on reliability for pulsed power systems." Laser and Particle Beams 32, no. 2 (February 14, 2014): 197–204. http://dx.doi.org/10.1017/s0263034613000918.

Повний текст джерела

Анотація:

AbstractA method to design the composite insulation structures in pulsed power systems is proposed in this paper. The theoretical bases for this method include the Weibull statistical distribution and the empirical insulation formula. A uniform formula to describe the reliability (R) for different insulation media such as solid, liquid, gas, vacuum, and vacuum surface is derived. The dependence curves of the normalized applied field onRare also obtained. These curves show that the normalized applied field decreases rapidly asRincreases but the declining rates corresponding to different insulation media are different. In addition, ifRis required to be higher than a given level, the normalized applied field should be smaller than a certain value. In practical design, the common range of the applied fields for different insulation media should be chosen to meet a global reliability requirement. In the end, the proposed method is demonstrated with a specific coaxial high-voltage vacuum insulator.

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Hao, F., and W. Hu. "Electrical breakdown of vacuum insulation at cryogenic temperature." IEEE Transactions on Electrical Insulation 25, no. 3 (June 1990): 557–62. http://dx.doi.org/10.1109/14.55731.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Wetzer, J. M. "Vacuum insulation fundamentals and applications." IEEE Transactions on Dielectrics and Electrical Insulation 6, no. 4 (August 1999): 393. http://dx.doi.org/10.1109/tdei.1999.788731.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Rowe, S. W. "Vacuum insulation, fundamentals and applications." IEEE Transactions on Dielectrics and Electrical Insulation 10, no. 4 (August 2003): 549. http://dx.doi.org/10.1109/tdei.2003.1219635.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Kato, K., S. Kaneko, S. Okabe, and H. Okubo. "Optimization technique for electrical insulation design of vacuum interrupters." IEEE Transactions on Dielectrics and Electrical Insulation 15, no. 5 (October 2008): 1456–63. http://dx.doi.org/10.1109/tdei.2008.4656256.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Proskurovsky, D. I., S. W. Rowe, and A. V. Batrakov. "Vacuum insulation, fundamentals and applications [Editorial]." IEEE Transactions on Dielectrics and Electrical Insulation 13, no. 1 (February 2006): 1. http://dx.doi.org/10.1109/tdei.2006.1593394.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Okubo, Hitoshi, and Craig Miller. "Editorial: Vacuum insulation, fundamentals and applications." IEEE Transactions on Dielectrics and Electrical Insulation 14, no. 3 (June 2007): 531. http://dx.doi.org/10.1109/tdei.2007.369508.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

12

SHIOIRI, Tetsu, and Mitsutaka HOMMA. "Insulation Technology of Vacuum Interrupter." SHINKU 43, no. 1 (2000): 18–23. http://dx.doi.org/10.3131/jvsj.43.18.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Simmler, H., and S. Brunner. "Vacuum insulation panels for building application." Energy and Buildings 37, no. 11 (November 2005): 1122–31. http://dx.doi.org/10.1016/j.enbuild.2005.06.015.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Balachandra, T. C. "Electrical Insulation Behavior of High Vacuum under Variable Frequency Alternating Excitations." IEEE Transactions on Dielectrics and Electrical Insulation 28, no. 3 (June 2021): 1079–87. http://dx.doi.org/10.1109/tdei.2021.009425.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Sudarshan, T. S., Xianyun Ma, and P. G. Muzykov. "High field insulation relevant to vacuum microelectronic devices." IEEE Transactions on Dielectrics and Electrical Insulation 9, no. 2 (April 2002): 216–25. http://dx.doi.org/10.1109/94.993738.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Kong, Fei, Yusuke Nakano, Hiroki Kojima, Naoki Hayakawa, Toshinori Kimura, and Mitsuru Tsukima. "Discharge characteristics of composite insulation system with floating electrode and solid insulator in vacuum." IEEE Transactions on Dielectrics and Electrical Insulation 23, no. 2 (April 2016): 1219–25. http://dx.doi.org/10.1109/tdei.2015.005588.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Gupta, Shrikrishna. "Special issue of the IEEE Transactions on Dielectrics and Electrical Insulation on Vacuum Insulation, Fundamentals and Applications." IEEE Transactions on Dielectrics and Electrical Insulation 22, no. 1 (February 2015): 636. http://dx.doi.org/10.1109/tdei.2014.005124.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Bang, Seungmin, Hyun-Woo Lee, and Bang-Wook Lee. "Real-Time Monitoring of the Vacuum Degree Based on the Partial Discharge and an Insulation Supplement Design for a Distribution Class Vacuum Interrupter." Energies 14, no. 23 (November 24, 2021): 7891. http://dx.doi.org/10.3390/en14237891.

Повний текст джерела

Анотація:

The internal pressure of a vacuum interrupter (VI) is increased by arc heat, ceramic cracking, gas leakage, and manufacturing defects. Accordingly, the dielectric strength of VI rapidly decreases. To improve the reliability of power transmission, efficient maintenance through the real-time monitoring of the vacuum degree is essential. However, real-time monitoring of the vacuum degree is difficult, and related research is scarce. Additionally, due to the insulation problems of this technology, there are few commercially available products. Therefore, this paper proposes a method for real-time monitoring of the vacuum degree and an insulation supplement design for a distribution class VI. First, dielectric experiments were conducted to identify the section in which the dielectric strength of the VI rapidly decreased according to the vacuum degree. Second, for real-time monitoring of the VI, several factors were proposed through the partial discharge in the VI, while the capacitance characteristics of the VI were calculated to improve the signal of the internal partial discharge. Finally, to supplement the dielectric problems of the solid insulation high voltage apparatus that occur when real-time monitoring technology is applied, the insulation supplement design was performed through the finite element method (FEM).

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Kong, Fei, Hiroki Kojima, Toshinori Kimura, Mitsuru Tsukima, and Naoki Hayakawa. "Discharge Pattern Discrimination for Composite Insulation System in Vacuum." IEEJ Transactions on Fundamentals and Materials 136, no. 9 (2016): 594–602. http://dx.doi.org/10.1541/ieejfms.136.594.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Li, Shimin, Yingsan Geng, Zhiyuan Liu, and Jianhua Wang. "Influence of arc-melted cathode layer depth on vacuum insulation." IEEE Transactions on Dielectrics and Electrical Insulation 24, no. 6 (December 2017): 3327–32. http://dx.doi.org/10.1109/tdei.2017.006488.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Jia, Shenli. "Special issue on vacuum insulation, fundamentals and applications [Guest Editorial]." IEEE Transactions on Dielectrics and Electrical Insulation 24, no. 6 (December 2017): 3303. http://dx.doi.org/10.1109/tdei.2017.007068.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Miller, H. C. "History of the International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV)." IEEE Electrical Insulation Magazine 21, no. 2 (March 2005): 30–39. http://dx.doi.org/10.1109/mei.2005.1412217.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Radwan, Ali, Takao Katsura, Saim Memon, Ahmed A. Serageldin, Makoto Nakamura, and Katsunori Nagano. "Thermal and electrical performances of semi-transparent photovoltaic glazing integrated with translucent vacuum insulation panel and vacuum glazing." Energy Conversion and Management 215 (July 2020): 112920. http://dx.doi.org/10.1016/j.enconman.2020.112920.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Cheng, Xin-Bing, Jin-Liang Liu, Zhi-Qiang Hong, and Bao-Liang Qian. "Operating characteristics of intense electron beam accelerator at different load conditions." Laser and Particle Beams 30, no. 4 (August 1, 2012): 531–39. http://dx.doi.org/10.1017/s0263034612000456.

Повний текст джерела

Анотація:

AbstractAs the development of the pulsed power technology, high voltage pulse transformer (HVPT) is usually used instead of Marx generator as a charging device for the pulse forming line (PFL) of intense electron-beam accelerator (IEBA), and which make the IEBA compact. However, during the operation of the IEBA, the HVPT may be destroyed for the failure of electrical insulation and the over-voltage. So in this paper, the output voltage characteristics of IEBA, characteristics of the voltage at the output terminal of HVPT at four kinds of load conditions are analyzed, including load matching, load short, load open, and surface flashover in the vacuum chamber. It is found that load short, load open, and surface flashover in vacuum chamber will affect the voltage at the output terminal of HVPT, and an oscillation wave could be formed, which affect the electrical insulation of HVPT and decrease the lifetime of HVPT. Meanwhile, the waveform of the load voltage is also modified, especially at the conditions of load open and surface flashover in vacuum chamber. When the load is open, the amplitude of the output main pulse of IEBA is twice the charging voltage of BPFL. However, the amplitude of the output pulse of IEBA is modified by the voltage at the output terminal of HVPT, and the resistance of main switch channel has a great effect on the amplitude of the load voltage. When surface flashover occurs in the vacuum chamber, the pulse duration of the output voltage will be decreased. So, during the operation of IEBA, load short, load open and surface flashover in vacuum chamber should be avoided.

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Yamamoto, Osamu, Takehisa Hara, Kimihito Ohmae, and Muneaki Hayashi. "Insulation performance and flashover mechanism of bridged vacuum gaps." Electrical Engineering in Japan 112, no. 2 (1992): 11–21. http://dx.doi.org/10.1002/eej.4391120202.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Jurnal, Redaksi Tim. "PROSES PERAKITAN DAN PENGUJIAN KUBIKEL SM6 VACUUM CIRCUIT BREAKER 20 kV DI PT. GALLEON CAHAYA INVESTAMA." Energi & Kelistrikan 10, no. 1 (February 6, 2019): 45–52. http://dx.doi.org/10.33322/energi.v10i1.323.

Повний текст джерела

Анотація:

At PT. Galleon Cahaya Investama which in this case much needed electrical appliance to be used in distribution network that is one tool of cubicles before marketed at other company. Cubiclesis a connecting device, divider and disconnecting load doing testing. In this cubicle insulation testing,cubicle is already in pairs and have connected with The transformer after that just done insulation testing with mega ohm meter, because cubicle is already 5 with the transformer then the insulation resistance value will be reduced because of the existing transformer windings in it. In testing leakage current PMT component is still in good condition, seen from test results that is still Below 300 μA, and in the test of isolation resistance, also in good condition, looking from the results that have been tested still shows the value above the standard isolation resistance. With visual inspection by looking at the results of work with the eyes and tools, namely see the shape, rust and placement of components that have been right.

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Zhang Tuo, 张拓, and 李盛涛 Li Shengtao. "Electric field analysis of A-B-A insulation structure in vacuum." High Power Laser and Particle Beams 22, no. 8 (2010): 1944–48. http://dx.doi.org/10.3788/hplpb20102208.1944.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Miura, Osuke, Naotaka Ichiyanagi, Hirokazu Misawa, and Naomi Hashimoto. "Characteristics of laminated tape insulation in high vacuum at cryogenic temperature." IEEJ Transactions on Fundamentals and Materials 116, no. 12 (1996): 1107–12. http://dx.doi.org/10.1541/ieejfms1990.116.12_1107.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Matsuo, T., H. Fujimori, S. Yanabu, H. Ichikawa, Y. Matsui, and M. Sakaki. "Insulation recovery characteristics after current interruption by various vacuum interrupter electrodes." IEEE Transactions on Dielectrics and Electrical Insulation 13, no. 1 (February 2006): 10–17. http://dx.doi.org/10.1109/tdei.2006.1593396.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Su, Guo-Qiang, Yan Lang, Guan-Jun Zhang, Bai-Peng Song, and Xin-Pei Ma. "Study on surface electrical performance of machinable ceramics for high voltage electro-vacuum insulation." Journal of Electroceramics 33, no. 1-2 (June 15, 2014): 111–16. http://dx.doi.org/10.1007/s10832-014-9942-0.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Park, Heecheol, A.-rong Kim, Seokho Kim, Minwon Park, Kwangmin Kim, and Taejun Park. "Mechanical and electric characteristics of vacuum impregnated no-insulation HTS coil." Physica C: Superconductivity and its Applications 504 (September 2014): 138–43. http://dx.doi.org/10.1016/j.physc.2014.04.010.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Huang, Qifeng, Shengtao Li, Tuo Zhang, Fengyan Ni, and Jianying Li. "Improvement of surface flashover characteristics about 45° insulator configuration in vacuum by a new organic insulation structure." IEEE Transactions on Dielectrics and Electrical Insulation 18, no. 6 (December 2011): 2115–22. http://dx.doi.org/10.1109/tdei.2011.6118652.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Oyieke, Andrew Y. A., and Freddie L. Inambao. "Performance Characterisation of a Hybrid Flat-Plate Vacuum Insulated Photovoltaic/Thermal Solar Power Module in Subtropical Climate." International Journal of Photoenergy 2016 (2016): 1–15. http://dx.doi.org/10.1155/2016/6145127.

Повний текст джерела

Анотація:

A flat-plate Vacuum Insulated Photovoltaic and Thermal (VIPV/T) system has been thermodynamically simulated and experimentally evaluated to assess the thermal and electrical performance as well as energy conversion efficiencies under a subtropical climate. A simulation model made of specified components is developed in Transient Systems (TRNSYS) environment into which numerical energy balance equations are implemented. The influence of vacuum insulation on the system’s electrical and thermal yields has been evaluated using temperatures, current, voltage, and power flows over daily and annual cycles under local meteorological conditions. The results from an experiment conducted under steady-state conditions in Durban, South Africa, are compared with the simulation based on the actual daily weather data. The VIPV/T has shown improved overall and thermal efficiencies of 9.5% and 16.8%, respectively, while electrical efficiency marginally reduced by 0.02% compared to the conventional PV/T. The simulated annual overall efficiency of 29% (i.e., 18% thermal and 11% electrical) has been realised, in addition to the solar fraction, overall exergy, and primary energy saving efficiencies of 39%, 29%, and 27%, respectively.

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Konig, D. "Opening ceremony speech of XXI international symposium on discharges and electrical insulation in vacuum (ISDEIV)." IEEE Electrical Insulation Magazine 21, no. 2 (March 2005): 37–39. http://dx.doi.org/10.1109/mei.2005.1412218.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Nemanič, V., and M. Žumer. "New organic fiber-based core material for vacuum thermal insulation." Energy and Buildings 90 (March 2015): 137–41. http://dx.doi.org/10.1016/j.enbuild.2015.01.012.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Miura, Osuke, Naotaka Ichiyanagi, Hirokazu Misawa, and Naomi Hashimoto. "Characteristics of laminated tape insulation in high vacuum at cryogenic temperature." Electrical Engineering in Japan 121, no. 3 (November 30, 1997): 20–26. http://dx.doi.org/10.1002/(sici)1520-6416(19971130)121:3<20::aid-eej3>3.0.co;2-z.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Lakatos, Ákos, and Zsolt Kovács. "Comparison of thermal insulation performance of vacuum insulation panels with EPS protection layers measured with different methods." Energy and Buildings 236 (April 2021): 110771. http://dx.doi.org/10.1016/j.enbuild.2021.110771.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Berezinets, N. I., V. I. Korotkov, L. V. Rodova, and B. E. Rybalko. "Insulation impregnation quality rating for electric motors windings by utrasonic and vacuum-filling methods." Russian Electrical Engineering 80, no. 3 (March 2009): 154–56. http://dx.doi.org/10.3103/s1068371209030092.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Driessen, A. B. J. M., J. van Duivenbode, and P. A. A. F. Wouters. "Partial discharge detection for characterizing cable insulation under low and medium vacuum conditions." IEEE Transactions on Dielectrics and Electrical Insulation 25, no. 1 (February 2018): 306–15. http://dx.doi.org/10.1109/tdei.2018.006837.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Hara, Masanori, Junya Suehiro, Hidetaka Shigematsu, and Shinsuke Yano. "Methods for the improvement of electrical insulation in vacuum in the presence of transverse magnetic field." IEEJ Transactions on Fundamentals and Materials 109, no. 9 (1989): 375–82. http://dx.doi.org/10.1541/ieejfms1972.109.375.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Hara, Masanori, Junya Suehiro, Hidetaka Shigematsu, and Shinsuke Yano. "Methods for the improvement of electrical insulation in vacuum in the presence of transverse magnetic field." Electrical Engineering in Japan 110, no. 2 (1990): 27–35. http://dx.doi.org/10.1002/eej.4391100204.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Bursikov, A., A. Mednikov, I. Rodin, D. Stepanov, and V. Tanchuk. "Results of Vacuum-Pressure Impregnation of the PF1 Coil Ground Insulation." IEEE Transactions on Applied Superconductivity 32, no. 4 (June 2022): 1–4. http://dx.doi.org/10.1109/tasc.2022.3149678.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Shemshadi, Asaad. "A novel approach for basic insulation-level (BIL) enhancement of vacuum interrupters." Electrical Engineering 102, no. 4 (May 23, 2020): 2075–81. http://dx.doi.org/10.1007/s00202-020-01020-8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Batard, A., T. Duforestel, L. Flandin, and B. Yrieix. "Modelling of long-term hygro-thermal behaviour of vacuum insulation panels." Energy and Buildings 173 (August 2018): 252–67. http://dx.doi.org/10.1016/j.enbuild.2018.04.041.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Biswas, Kaushik, Tapan Patel, Som Shrestha, Douglas Smith, and Andre Desjarlais. "Whole building retrofit using vacuum insulation panels and energy performance analysis." Energy and Buildings 203 (November 2019): 109430. http://dx.doi.org/10.1016/j.enbuild.2019.109430.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Di, Xiaobo, Yimin Gao, Chonggao Bao, and Shengqiang Ma. "Thermal insulation property and service life of vacuum insulation panels with glass fiber chopped strand as core materials." Energy and Buildings 73 (April 2014): 176–83. http://dx.doi.org/10.1016/j.enbuild.2014.01.010.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Sato, Shinji, Kenichi Koyama, Takayuki Itotani, Seiichi Miyamoto, and Toshimasa Maruyama. "Development of Vacuum Insulation Technology for a Multifunctional Vacuum Interrupter Loaded into an SF6 Gas Free 24 kV Switchgear." IEEJ Transactions on Power and Energy 123, no. 4 (2003): 442–49. http://dx.doi.org/10.1541/ieejpes.123.442.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Mao, Shang, Ankang Kan, Wenbing Zhu, and Yebaihe Yuan. "The impact of vacuum degree and barrier envelope on thermal property and service life of vacuum insulation panels." Energy and Buildings 209 (February 2020): 109699. http://dx.doi.org/10.1016/j.enbuild.2019.109699.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Ghazi Wakili, K., T. Stahl, and S. Brunner. "Effective thermal conductivity of a staggered double layer of vacuum insulation panels." Energy and Buildings 43, no. 6 (June 2011): 1241–46. http://dx.doi.org/10.1016/j.enbuild.2011.01.004.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Nussbaumer, T., R. Bundi, Ch Tanner, and H. Muehlebach. "Thermal analysis of a wooden door system with integrated vacuum insulation panels." Energy and Buildings 37, no. 11 (November 2005): 1107–13. http://dx.doi.org/10.1016/j.enbuild.2004.11.002.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!