Статті в журналах з теми "Ultrasonic; Magnetic abrasive"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Ultrasonic; Magnetic abrasive".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Ma, Fujian, Ziguang Wang, Yu Liu, Zhihua Sha, and Shengfang Zhang. "Machining Performance for Ultrasonic-Assisted Magnetic Abrasive Finishing of a Titanium Alloy: A Comparison with Magnetic Abrasive Finishing." Machines 10, no. 10 (October 6, 2022): 902. http://dx.doi.org/10.3390/machines10100902.
Повний текст джерелаZhang, Jian Hua, Sheng Feng Ren, Zong Wei Niu, Li Li, and Min Gang Xu. "Ultrasonic Machining Mechanism of Sintered Nd-Fe-B Magnetic Materials." Materials Science Forum 471-472 (December 2004): 59–62. http://dx.doi.org/10.4028/www.scientific.net/msf.471-472.59.
Повний текст джерелаShukla, Vipin C., and Pulak M. Pandey. "Experimental investigations into sintering of magnetic abrasive powder for ultrasonic assisted magnetic abrasive finishing process." Materials and Manufacturing Processes 32, no. 1 (September 27, 2016): 108–14. http://dx.doi.org/10.1080/10426914.2016.1176199.
Повний текст джерелаYamada, Takazo, Kazuhito Ohashi, Hirofumi Suzuki, and Akinori Yui. "Special Issue on High Performance Abrasive Technologies." International Journal of Automation Technology 16, no. 1 (January 5, 2022): 3–4. http://dx.doi.org/10.20965/ijat.2022.p0003.
Повний текст джерелаMulik, Rahul S., and Pulak M. Pandey. "Ultrasonic assisted magnetic abrasive finishing of hardened AISI 52100 steel using unbonded SiC abrasives." International Journal of Refractory Metals and Hard Materials 29, no. 1 (January 2011): 68–77. http://dx.doi.org/10.1016/j.ijrmhm.2010.08.002.
Повний текст джерелаZhou, K., Y. Chen, Z. W. Du, and F. L. Niu. "Surface integrity of titanium part by ultrasonic magnetic abrasive finishing." International Journal of Advanced Manufacturing Technology 80, no. 5-8 (April 12, 2015): 997–1005. http://dx.doi.org/10.1007/s00170-015-7028-z.
Повний текст джерелаSihag, Nitesh, Prateek Kala, and Pulak M. Pandey. "Experimental investigations of chemo-ultrasonic assisted magnetic abrasive finishing process." International Journal of Precision Technology 5, no. 3/4 (2015): 246. http://dx.doi.org/10.1504/ijptech.2015.073822.
Повний текст джерелаMisra, Aviral, Pulak M. Pandey, U. S. Dixit, Anish Roy, and Vadim V. Silberschmidt. "Multi-objective optimization of ultrasonic-assisted magnetic abrasive finishing process." International Journal of Advanced Manufacturing Technology 101, no. 5-8 (November 23, 2018): 1661–70. http://dx.doi.org/10.1007/s00170-018-3060-0.
Повний текст джерелаFang, S., and A. Frank. "A Metallographic Preparation Method for Three-Dimensional Microstructural Characterization of Machining Chips." Practical Metallography 58, no. 10 (October 1, 2021): 644–61. http://dx.doi.org/10.1515/pm-2021-0056.
Повний текст джерелаMulik, R. S., and P. M. Pandey. "Experimental investigations and optimization of ultrasonic assisted magnetic abrasive finishing process." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 225, no. 8 (July 22, 2011): 1347–62. http://dx.doi.org/10.1177/09544054jem2122.
Повний текст джерелаMulik, Rahul S., and Pulak M. Pandey. "Mechanism of Surface Finishing in Ultrasonic-Assisted Magnetic Abrasive Finishing Process." Materials and Manufacturing Processes 25, no. 12 (December 3, 2010): 1418–27. http://dx.doi.org/10.1080/10426914.2010.499580.
Повний текст джерелаJiang, T. Y., F. J. Ma, X. Liu, Y. Liu, S. F. Zhang, and Z. H. Sha. "Technological Rule of Ultrasonic Assisted Magnetic Abrasive Finishing of Titanium Alloy." IOP Conference Series: Materials Science and Engineering 616 (October 16, 2019): 012018. http://dx.doi.org/10.1088/1757-899x/616/1/012018.
Повний текст джерелаMisra, Aviral, Pulak M. Pandey, and U. S. Dixit. "Modeling of material removal in ultrasonic assisted magnetic abrasive finishing process." International Journal of Mechanical Sciences 131-132 (October 2017): 853–67. http://dx.doi.org/10.1016/j.ijmecsci.2017.07.023.
Повний текст джерелаJin, Dong-Hyun, and Jae-Seob Kwak. "Experimental Verification of Characteristics of Magnetic Abrasive Polishing Combined with Ultrasonic Vibration." Transactions of the Korean Society of Mechanical Engineers A 39, no. 9 (September 1, 2015): 923–28. http://dx.doi.org/10.3795/ksme-a.2015.39.9.923.
Повний текст джерелаJIAO, Anyuan. "Experimental Research of Titanium Alloy Taper Hole by Ultrasonic Magnetic Abrasive Finishing." Journal of Mechanical Engineering 53, no. 19 (2017): 114. http://dx.doi.org/10.3901/jme.2017.19.114.
Повний текст джерелаKala, Prateek, Sumit Kumar, and Pulak M. Pandey. "Polishing of Copper Alloy Using Double Disk Ultrasonic Assisted Magnetic Abrasive Polishing." Materials and Manufacturing Processes 28, no. 2 (February 2013): 200–206. http://dx.doi.org/10.1080/10426914.2012.746704.
Повний текст джерелаKala, Prateek, and Pulak M. Pandey. "Experimental investigations into ultrasonic-assisted double-disk magnetic abrasive finishing of two paramagnetic materials." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231, no. 6 (May 26, 2015): 1021–38. http://dx.doi.org/10.1177/0954405415581153.
Повний текст джерелаMisra, Aviral, Pulak Mohan Pandey, Uday S. Dixit, Anish Roy, and Vadim V. Silberschmidt. "Modeling of finishing force and torque in ultrasonic-assisted magnetic abrasive finishing process." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233, no. 2 (October 30, 2017): 411–25. http://dx.doi.org/10.1177/0954405417737579.
Повний текст джерелаYun, H., B. Han, Y. Chen, and M. Liao. "Internal finishing process of alumina ceramic tubes by ultrasonic-assisted magnetic abrasive finishing." International Journal of Advanced Manufacturing Technology 85, no. 1-4 (October 23, 2015): 727–34. http://dx.doi.org/10.1007/s00170-015-7927-z.
Повний текст джерелаFarwaha, Harnam Singh, Dharmpal Deepak, and Gurinder Singh Brar. "Mathematical modeling and process parameters optimization of ultrasonic assisted electrochemical magnetic abrasive machining." Journal of Mechanical Science and Technology 34, no. 12 (December 2020): 5063–73. http://dx.doi.org/10.1007/s12206-020-1110-7.
Повний текст джерелаMisra, Aviral, Pulak M. Pandey, and U. S. Dixit. "Modeling and simulation of surface roughness in ultrasonic assisted magnetic abrasive finishing process." International Journal of Mechanical Sciences 133 (November 2017): 344–56. http://dx.doi.org/10.1016/j.ijmecsci.2017.08.056.
Повний текст джерелаShukla, Vipin C., Pulak M. Pandey, Uday S. Dixit, Anish Roy, and Vadim Silberschmidt. "Modeling of normal force and finishing torque considering shearing and ploughing effects in ultrasonic assisted magnetic abrasive finishing process with sintered magnetic abrasive powder." Wear 390-391 (November 2017): 11–22. http://dx.doi.org/10.1016/j.wear.2017.06.017.
Повний текст джерелаOhashi, Kazuhito, Hirofumi Suzuki, and Takazo Yamada. "Special Issue on Advances in Abrasive Technology." International Journal of Automation Technology 15, no. 1 (January 5, 2021): 3. http://dx.doi.org/10.20965/ijat.2021.p0003.
Повний текст джерелаGuo, Ce, Dongliang Zhang, Xiuhong Li, Jing Liu, and Feng Li. "A permanent magnet tool in ultrasonic assisted magnetic abrasive finishing for 30CrMnSi grooves part." Precision Engineering 75 (May 2022): 180–92. http://dx.doi.org/10.1016/j.precisioneng.2022.02.010.
Повний текст джерелаFarwaha, Harnam Singh, Dharmpal Deepak, and Gurinder Singh Brar. "Process Parameter Optimization of Ultrasonic Assisted Electrochemical Magnetic Abrasive Finishing of 316L Stainless Steel." Journal of Physics: Conference Series 1240 (July 2019): 012041. http://dx.doi.org/10.1088/1742-6596/1240/1/012041.
Повний текст джерелаGençer, Gökçe Mehmet, Fatih Kahraman, and Coşkun Yolcu. "Role of enhanced surface grain refinement and hardness improvement induced by the combined effect of friction stir processing and ultrasonic impact treatment on slurry abrasive wear performance of silicon carbide particle reinforced A356 composites." Materials Research Express 8, no. 12 (December 1, 2021): 126513. http://dx.doi.org/10.1088/2053-1591/ac3f5c.
Повний текст джерелаLv, Zhe, Rongguo Hou, Jianhua Ren, Chuanzhen Huang, and Huan Qi. "Evaluation on ultrasonic abrasive water jet surface processing of aluminum nitride." Materials Research Express 6, no. 9 (August 2, 2019): 095207. http://dx.doi.org/10.1088/2053-1591/ab355b.
Повний текст джерелаSihag, Nitesh, Prateek Kala, and Pulak M. Pandey. "Analysis of Surface Finish Improvement during Ultrasonic Assisted Magnetic Abrasive Finishing on Chemically treated Tungsten Substrate." Procedia Manufacturing 10 (2017): 136–46. http://dx.doi.org/10.1016/j.promfg.2017.07.040.
Повний текст джерелаKumar, A. Sravan, Sankha Deb, and S. Paul. "Burr removal from high-aspect-ratio micro-pillars using ultrasonic-assisted abrasive micro-deburring." Journal of Micromechanics and Microengineering 32, no. 5 (April 19, 2022): 055010. http://dx.doi.org/10.1088/1361-6439/ac6562.
Повний текст джерелаMulik, Rahul S., Vineet Srivastava, and Pulak M. Pandey. "Experimental Investigations and Modeling of Temperature in the Work-Brush Interface during Ultrasonic Assisted Magnetic Abrasive Finishing Process." Materials and Manufacturing Processes 27, no. 1 (January 2012): 1–9. http://dx.doi.org/10.1080/10426914.2010.515647.
Повний текст джерелаKovács, Zsolt Ferenc, Zsolt János Viharos, and János Kodácsy. "Making Twist-Free Surfaces by Magnetic Assisted Ball Burnishing." Solid State Phenomena 261 (August 2017): 159–66. http://dx.doi.org/10.4028/www.scientific.net/ssp.261.159.
Повний текст джерелаHanifuddin, Muhammad, and Nofrijon Sofyan. "THE INFLUENCE OF MOLYBDENUM DISULPHIDE-FRICTION MODIFIER (FM) ADDITIVE INCREMENT ON THE FRICTION AND WEAR PREVENTION BEHAVIOUR OF HVI 60 BASE OIL." Scientific Contributions Oil and Gas 38, no. 2 (August 31, 2015): 71–82. http://dx.doi.org/10.29017/scog.38.2.542.
Повний текст джерелаPandey, Kheelraj, and Pulak M. Pandey. "An integrated application of chemo-ultrasonic approach for improving surface finish of Si (100) using double disk magnetic abrasive finishing." International Journal of Advanced Manufacturing Technology 103, no. 9-12 (May 11, 2019): 3871–86. http://dx.doi.org/10.1007/s00170-019-03829-5.
Повний текст джерелаZhou, Chenghu, Qiuhui Zhang, Changtao He, and Yaguo Li. "Function of liquid and tool wear in ultrasonic bound-abrasive polishing of fused silica with different polishing tools." Optik 125, no. 15 (August 2014): 4064–68. http://dx.doi.org/10.1016/j.ijleo.2014.01.113.
Повний текст джерелаSingh Farwaha, Harnam, Dharmpal Deepak, and Gurinder Singh Brar. "Design and performance of ultrasonic assisted magnetic abrasive finishing combined with electrolytic process set up for machining and finishing of 316L stainless steel." Materials Today: Proceedings 33 (2020): 1626–31. http://dx.doi.org/10.1016/j.matpr.2020.06.143.
Повний текст джерелаWang, Ziping, Xian Xue, He Yin, Zhengxuan Jiang, and Yefei Li. "Research Progress on Monitoring and Separating Suspension Particles for Lubricating Oil." Complexity 2018 (June 5, 2018): 1–9. http://dx.doi.org/10.1155/2018/9356451.
Повний текст джерелаMirian, Saeed, Mohsen safavi, Alireza Fadaei, Mahmoud Salimi, and Mahmoud Farzin. "Improving the quality of surface in polishing process with the magnetic abrasive powder polishing (MAPP) by use of ultrasonic oscillation of work-piece on a CNC table." International Journal of Precision Engineering and Manufacturing 12, no. 2 (April 2011): 275–84. http://dx.doi.org/10.1007/s12541-011-0037-4.
Повний текст джерелаDeng, Hongguang, Min Zhong, and Wenhu Xu. "Effects of Different Dispersants on Chemical Reaction and Material Removal in Ultrasonic Assisted Chemical Mechanical Polishing of Sapphire." ECS Journal of Solid State Science and Technology 11, no. 3 (March 1, 2022): 033007. http://dx.doi.org/10.1149/2162-8777/ac5a6d.
Повний текст джерелаNakamura, Kyuzo, and Yoshifumi Ota. "Apparatus for manufacturing of abrasion resistant magnetic recording product." Journal of the Acoustical Society of America 82, no. 5 (November 1987): 1871. http://dx.doi.org/10.1121/1.395675.
Повний текст джерелаWilliams, J. A., and A. M. Hyncica. "Abrasive wear in lubricated contacts." Journal of Physics D: Applied Physics 25, no. 1A (January 14, 1992): A81—A90. http://dx.doi.org/10.1088/0022-3727/25/1a/015.
Повний текст джерелаHong, Yong-Ho, Su-Ri Park, Sang-Wook Han, and Byung-Jick Kim. "Smart Decontamination Device for Small-size Radioactive Scrap Metal Waste : Using Abrasion pin in Rotating Magnetic Field and Ultrasonic Wave Cleaner." Journal of the Nuclear Fuel Cycle and Waste Technology 12, no. 1 (March 30, 2014): 79–88. http://dx.doi.org/10.7733/jnfcwt.2014.12.1.79.
Повний текст джерелаKrawczyk, Ryszard, Jacek Słania, Grzegorz Golański, and Adam Zieliński. "Evaluation of the Properties and Microstructure of Thick-Walled Welded Joint of Wear Resistant Materials." Materials 15, no. 19 (October 9, 2022): 7009. http://dx.doi.org/10.3390/ma15197009.
Повний текст джерелаGant, A. J., and M. G. Gee. "A review of micro-scale abrasion testing." Journal of Physics D: Applied Physics 44, no. 7 (January 28, 2011): 073001. http://dx.doi.org/10.1088/0022-3727/44/7/073001.
Повний текст джерелаBriscoe, B. J., P. D. Evans та J. K. Lancaster. "Single point deformation and abrasion of γ-irradiated poly(tetrafluoroethylene)". Journal of Physics D: Applied Physics 20, № 3 (14 березня 1987): 346–53. http://dx.doi.org/10.1088/0022-3727/20/3/017.
Повний текст джерелаHutchings, I. M. "Ductile-brittle transitions and wear maps for the erosion and abrasion of brittle materials." Journal of Physics D: Applied Physics 25, no. 1A (January 14, 1992): A212—A221. http://dx.doi.org/10.1088/0022-3727/25/1a/033.
Повний текст джерелаSharifi, S., and M. M. Stack. "A comparison of the tribological behaviour of Y-TZP in tea and coffee under micro-abrasion conditions." Journal of Physics D: Applied Physics 46, no. 40 (September 19, 2013): 404008. http://dx.doi.org/10.1088/0022-3727/46/40/404008.
Повний текст джерелаJiang, Jiaren, and R. D. Arnell. "The dependence of the fraction of material removed on the degree of penetration in single particle abrasion of ductile materials." Journal of Physics D: Applied Physics 31, no. 10 (May 21, 1998): 1163–67. http://dx.doi.org/10.1088/0022-3727/31/10/006.
Повний текст джерелаDixit, Nitin, Varun Sharma, and Pradeep1 Kumar. "Mathematical modeling of material removal and surface roughness in ultrasonic assisted magnetic abrasive flow machining process." Journal of Manufacturing Science and Engineering, July 21, 2022, 1–31. http://dx.doi.org/10.1115/1.4055053.
Повний текст джерелаPak, Abbas, Mohammad Shayegh, Amir Abdullah, and Yahya Choopani. "Ultrasonic assisted magnetic abrasive finishing of DIN 1.2738 tool steel using vitrified bonded magnetic abrasive particles." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, March 5, 2023, 095440892311597. http://dx.doi.org/10.1177/09544089231159789.
Повний текст джерелаDixit, Nitin, Varun Sharma, and Pradeep Kumar. "Experimental investigations into ultrasonic assisted magnetic abrasive flow machining process." Materials and Manufacturing Processes, November 20, 2022, 1–16. http://dx.doi.org/10.1080/10426914.2022.2146712.
Повний текст джерела