Добірка наукової літератури з теми "UHDRS"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "UHDRS".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "UHDRS"
Silveira, Guilherme Wilson Souza, Dionatan Costa Rodrigues, Clarissana Araújo Botaro, and Luciana De Andrade Agostinho. "Avaliação funcional e motora da forma juvenil da doença de Huntington: relato de caso." Arquivos de Ciências da Saúde 27, no. 1 (December 11, 2020): 78. http://dx.doi.org/10.17696/2318-3691.27.1.2020.1725.
Повний текст джерелаTumas, Vitor, Sarah Teixeira Camargos, Paulo Samandar Jalali, Adriano de Paula Galesso, and Wilson Marques Jr. "Internal consistency of a Brazilian version of the unified Huntington's disease rating scale." Arquivos de Neuro-Psiquiatria 62, no. 4 (December 2004): 977–82. http://dx.doi.org/10.1590/s0004-282x2004000600009.
Повний текст джерелаWinder, J. Y., W. P. Achterberg, S. L. Gardiner, and R. A. C. Roos. "Longitudinal assessment of the Unified Huntington's Disease Rating Scale (UHDRS) and UHDRS–For Advanced Patients (UHDRS‐FAP) in patients with late stage Huntington's disease." European Journal of Neurology 26, no. 5 (January 27, 2019): 780–85. http://dx.doi.org/10.1111/ene.13889.
Повний текст джерелаWinder, Jessica Y., Wilco P. Achterberg, Johan Marinus, Sarah L. Gardiner, and Raymund A. C. Roos. "Assessment Scales for Patients with Advanced Huntington's Disease: Comparison of the UHDRS and UHDRS-FAP." Movement Disorders Clinical Practice 5, no. 5 (August 24, 2018): 527–33. http://dx.doi.org/10.1002/mdc3.12646.
Повний текст джерелаvan Marlen, Patricia, Max Dahele, Michael Folkerts, Eric Abel, Ben J. Slotman, and Wilko Verbakel. "Ultra-High Dose Rate Transmission Beam Proton Therapy for Conventionally Fractionated Head and Neck Cancer: Treatment Planning and Dose Rate Distributions." Cancers 13, no. 8 (April 13, 2021): 1859. http://dx.doi.org/10.3390/cancers13081859.
Повний текст джерелаDu, Ran. "Impact of Caryolanemagnolol on Gait and Functional Mobility on Individuals with Huntington’s Disease." Tropical Journal of Pharmaceutical Research 14, no. 9 (November 9, 2015): 1713–17. http://dx.doi.org/10.4314/tjpr.v14i9.24.
Повний текст джерелаCosta Rodrigues, Dionatan, Gregory Youdan Jr., Carmen Lúcia Antão Paiva, and Luciana Andrade Agostinho. "Functional and motor evaluation in a Brazilian Huntington’s disease cohort." Revista Neurociências 30 (December 13, 2022): 1–32. http://dx.doi.org/10.34024/rnc.2022.v30.13713.
Повний текст джерелаSchobel, Scott A., Giuseppe Palermo, Peggy Auinger, Jeffrey D. Long, Shiyang Ma, Omar S. Khwaja, Dylan Trundell, et al. "Motor, cognitive, and functional declines contribute to a single progressive factor in early HD." Neurology 89, no. 24 (November 15, 2017): 2495–502. http://dx.doi.org/10.1212/wnl.0000000000004743.
Повний текст джерелаTereshchenko, Alexander V., Jordan L. Schultz, Ansley J. Kunnath, Joel E. Bruss, Eric A. Epping, Vincent A. Magnotta, and Peg C. Nopoulos. "Subcortical T1-Rho MRI Abnormalities in Juvenile-Onset Huntington’s Disease." Brain Sciences 10, no. 8 (August 8, 2020): 533. http://dx.doi.org/10.3390/brainsci10080533.
Повний текст джерелаSvetozarskiy, S. N., S. V. Kopishinskaya, and I. G. Smetankin. "Retinal and choroidal morphological changes in Huntington's disease." Russian Ophthalmological Journal 12, no. 1 (March 16, 2019): 56–63. http://dx.doi.org/10.21516/2072-0076-2019-12-1-56-63.
Повний текст джерелаДисертації з теми "UHDRS"
Lindström, Anna. "Huntingtons sjukdom och behandling av motoriska symtom : En jämförelse mellan tetrabenazin och pridopidin." Thesis, Umeå universitet, Farmakologi, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-118740.
Повний текст джерелаPereira, Cíntia Marques. "Challenges in flex binning ultra high resolution seismic reflection data." Master's thesis, Universidade de Aveiro, 2017. http://hdl.handle.net/10773/21923.
Повний текст джерелаOs dados sísmicos 3D podem conter “lacunas” de cobertura devido a diversos problemas operacionais. As “lacunas” em dados 3D podem causar impactos adversos em várias etapas do processamento de dados, tais como na análise de velocidade, atenuação dos múltiplos, “stack” e migração. O Flex Binning é um método expediente para resolver este problema. O método Flex Binning permite que cada bin contenha mais traços, aumentando o tamanho efectivo de cada bin e incluindo traços dos bins vizinhos. O desafio é aplicar o Flex Binning a um número muito grande de traços que excedem as soluções actuais de design de software e capacidade de hardware. Vários testes foram realizados no software Seismic Processing Workshop (SPW). Durante os vários testes realizados, foi possível detectar e resolver problemas de código e “bugs” de software tais como, por exemplo, a incapacidade de aplicar uma grelha ao conjunto de dados e deixar traços fora da grelha. A questão da indexação foi outro problema detectado, que se resolveu por uma mudança de design do software no fluxo de processamento CMP Binning. A realização de vários testes nas diversas versões do SPW permitiu avanços na implementação do Flex Binning para conjuntos de dados de elevadas dimensões, nomeadamente a execução do fluxo CMP Binning com sucesso num conjunto de dados com 751GB. No fluxo de processamento CMP Binning, antes destes testes só era possível aplicar o Flex Binning corretamente a um conjunto de dados com aproximadamente 30 GB de tamanho.
3D seismic reflection data may contain coverage gaps due to operational problems. The gaps in 3D data can cause adverse impacts in several steps of the data processing such as velocity analysis, multiple attenuation, stacking and migration. Flex Binning is an expedient method to solve these gaps. The Flex Binning method allows each bin to contain more traces, by increasing the effective size of each bin and thereby include traces which also fall into neighboring bins. The challenge is to apply Flex Binning to very large number of traces exceeding current software design solutions and hardware capability. Several tests were performed with the Seismic Processing Workshop (SPW) software. During several tests, coding problems and bugs were detected and corrected, such as the inability to apply a grid to the dataset and leave traces out of the grid. Also, proper indexing was also solved by a change of software design in CMP Binning code. Beta testing on SPW allowed advances in the implementation of Flex Binning to large inputs, namely the execution of the CMP Binning flow successfully to a dataset with 751GB. The CMP Binning step before the tests could only Flex Binning effectively to an input with a size of approximately 30 GB.
Correia, Fábio Gonçalves. "Quality control of ultra high resolution seismic data acquisition in real-time." Master's thesis, Universidade de Aveiro, 2017. http://hdl.handle.net/10773/22007.
Повний текст джерелаA aquisicção de grandes volumes de dados durante uma campanha sísmica exige, necessariamente, mais tempo para o controlo de qualidade (QC). No entanto, o tempo de QC não pode ser extendido devido a limitações do tempo de operação, tendo de ser feito mais rápido, o que pode comprometer a qualidade. A alternativa, alocar mais pessoas e recursos para QC e melhorar a eficiência, leva a aumentos de custo e à necessidade de maiores embarcações. Além disso, o QC tradicional requer tempo de análise após a aquisição, atrasando a desmobilização da embarcação, aumentando assim os custos da aquisição. A solução proposta passou pelo desenvolvimento de um QC automático em tempo real eficiente, testando a Comparação Espetral e o Atributo Razão Sinal-Ruído - ferramentas desenvolvidas no software SPW, usado para processamento de dados sísmicos. Usando este software foi testada a deteção e identificação de dados de fraca qualidade através das ferramentas de QC automáticas e os seus parâmetros ajustados para incluir pelo menos todos os maus registos encontrados manualmente. Foi também feita a deteção e identificação de vários problemas encontrados durante uma campanha de aquisição, tais como fortes ondulações e respetiva direção, o ruído de esteira provocado pelas hélices da embarcação e consequente Trouser’s Effect e mau funcionamento das fontes ou dos recetores. A deteção antecipada destes problemas pode permitir a sua resolução atempada, não comprometendo a aquisição dos dados. Foram feitos vários relatórios para descrever problemas encontrados durante os testes de versões beta do software SPW e os mesmos reportados à equipa da Parallel Geoscience, que atualizou o software de forma a preencher os requisitos necessários ao bom funcionamento do QC em tempo real. Estas atualizações permitiram o correto mapeamento dos headers dos ficheiros, otimização da velocidade de análise das ferramentas automáticas e correção de erros em processamento dos dados em multi-thread, para evitar atrasos entre o QC em tempo real e a aquisição dos dados, adaptação das ferramentas à leitura de um número variável de assinaturas das fontes, otimização dos limites de memória gráfica e correção de valores anómalos de semelhança espetral. Algumas atualizações foram feitas através da simulação da aquisição de dados na empresa, de forma a efetuar alguns ajustes e posteriormente serem feitos testes numa campanha futura. A parametrização destas ferramentas foi alcançada, assegurando-se assim a correta deteção automática dos vários problemas encontrados durante a campanha de aquisição usada para os testes, o que levará à redução do tempo gasto na fase de QC a bordo e ao aumento da sua eficácia.
The acquisition of larger volumes of seismic data during a survey requires, necessarily, more time for quality control (QC). Despite this, QC cannot be extended due operational time constraints and must be done faster, compromising its efficiency and consequently the data quality. The alternative, to allocate more people and resources for QC to improve efficiency, leads to prohibitive higher costs and larger vessel requirements. Therefore, traditional QC methods for large data require extended standby times after data acquisition, before the vessel can be demobilized, increasing the cost of survey. The solution tested here consisted on the development of an efficient Real- Time QC by testing Spectral Comparison and Signal to Noise Ratio Attribute (tools developed for the SPW seismic processing software). The detection and identification of bad data by the automatic QC tools was made and the parameters adapted to include at least all manual QC flags. Also, the detection and identification of common problems during acquisition, such strong wave motion and its direction, strong propeller’s wash, trouser’s effect and malfunction in sources or receivers were carried out. The premature detection of these problems will allow to solve them soon enough to not compromise the data acquisition. Several problem reports from beta tests of SPW were transmitted to the Parallel Geoscience team, to be used as a reference to update the software and fulfil Real-Time QC requirements. These updates brought the correct mapping of data headers in files, optimization of data analysis speed along with multi-thread processing debug, to assure it will be running fast enough to avoid delays between acquisition and Real-Time QC, software design to read a variable number of source signatures, optimization of graphic memory limits and debugging of anomalous spectral semblance values. Some updates resulted from a data acquisition simulation that was set up in the office, to make some adjustments to be later tested on an upcoming survey. The parameterization of these tools was finally achieved, assuring the correct detection of all major issues found during the survey, what will eventually lead to the reduction of time needed for QC stage on board, as also to the improvement of its efficiency.
Katata, Enoque Paulo. "Avaliação do impacto das condições de operação na qualidade do sinal : processamento de dados de reflexão sísmica de multicanal." Master's thesis, Universidade de Aveiro, 2015. http://hdl.handle.net/10773/15655.
Повний текст джерелаAtravés do processamento de dados sísmicos convertem-se registos de campo em secções sísmicas com significado geológico, que revelam informações e ajudam a delinear as camadas geológicas do subsolo e identificar estruturas soterradas. Portanto, a interpretação dos dados sísmicos só é boa se o processamento também o for. Este trabalho é resultado de um estágio curricular na empresa de prospecção geofísica GeoSurveys, que consistiu principalmente em processar 18 linhas de dados de sísmica de reflexão multicanal de alta resolução adquiridas na ilha de Pulau Tekong em Singapura, que têm como finalidade investigação do solo da baia desta mesma ilha. Estes dados foram cedidos à GeoSurveys para fins académicos, caso em que se inclui esta dissertação. Para atingir os objectivos propostos que consistiam em avaliar o impacto das condições de operação na qualidade do sinal sísmico e interpretação das linhas, fez-se o processamento das linhas utilizando um fluxo processamento padrão utilizado na empresa, com recurso ao software Radex Pro. Este fluxo de processamento tem como mais-valia o método de correcções estáticas, o UHRS trim statics, além das técnicas habituais utilizadas para melhorar a resolução das secções sísmicas como é o caso da desconvolução, a atenuação de ruído através do stacking, correcções de NMO, e migração, entre outras técnicas. A interpretação das linhas sísmicas processadas foi feita no software Kingdom Suite (IHS), através da distinção da configuração interna dos reflectores em cada secção sísmica, estabelecendo deste modo as principais unidades sismo-estratigráficas e identificando as zonas de interface que delimitam os horizontes principais. Foi feito ainda um estudo geológico sumário da área de pesquisa e da evolução geodinâmica da região.
Through seismic data processing, multichannel seismic field records are converted into seismic sections with geological meaning, which help to delineate the subsurface geological layers and identify any buried structures. Therefore, seismic data interpretation is only good as the processing is. This work is the result of a curricular internship in a geophysical prospecting company, GeoSurveys. It consisted mainly of processing 18 high resolution seismic reflection multichannel lines obtained on the Island of Pulau Tekong, in Singapore, which were acquired to investigate the bottom and subsurface sediments of the Island bay. This work was kindly released to GeoSurveys for academic purposes, as it is the case of this dissertation. To achieve the objectives of this thesis, which are to assess the impact of operating conditions and processing on the quality of seismic signal and interpretation of the seismic lines, 18 seismic lines were processed with a standard processing flow used in the company, on the Radex Pro software. This processing flow has as the advantage of using the statics corrections method UHRS trim statics, besides the usual techniques used to improve the seismic resolution sections, such as deconvolution and noise attenuation by stacking, NMO corrections, and migration, among other techniques. The interpretation was made using the Kingdom software, through the analysis of the reflections internal configuration, and the identification of the main stratigraphic units. A summary geological study of the area of research area, together with its geodynamic evolution was also made and is presented in this thesis.
Francisco, Andrade António. "Quality control of the positioning data in ultra high resolution reflection seismics." Master's thesis, 2020. http://hdl.handle.net/10773/30581.
Повний текст джерелаO controle de qualidade é uma operação muito importante durante as campanhas de aquisição de dados sísmicos. Tem como objetivo avaliar a qualidade dos dados adquiridos, detetar problemas ocorridos durante a aquisição, e finalmente assegurar que os dados têm a qualidade necessária para serem aceites ou se devem ser rejeitados. O tempo de operação tem consequências diretas sobre os custos e, por esta razão, esta é uma operação que deve ser feita rapidamente. Assim, devem ser avaliados os fatores mais relevantes que podem comprometer seriamente a qualidade dos dados. O controle de qualidade da navegação é de extrema importância, visto que os erros de navegação contribuem para o feathering, que por sua vez constitui um dos principais critérios de rejeição. Por outro lado, a qualidade da navegação ou dos dados de posicionamento pode afetar fortemente a resolução sísmica pelo facto de serem usados para a determinação das posições das reflexões. Assim, dados de posicionamentos errados afetam os cálculos dos offsets e podem deslocar os pontos médios de reflexões para posições erradas, provocando uma discrepância entre a geologia real e a secção sísmica obtida. Deste modo, fica mais difícil a localização exata de blocos rochosos e a identificação de outros perigos em profundidade que colocam em risco a otimização das instalações das turbinas eólicas, trabalhos que a Geosurveys tem vindo a realizar. As principais causas na origem destes problemas estão relacionadas com o mau funcionamento das antenas GPS usadas no sistema de aquisição, e outros problemas sistemáticos, como a atribuição de geometria. Existem erros típicos que afetam a geometria, tais como o erro na medição da distância entre o centro da antena da lead buoy e o primeiro canal, e erros na medição e atribuição das distâncias entre canais para as diferentes secções dos streamers. A solução proposta neste trabalho passou pelo desenvolvimento de métodos eficientes para diagnóstico destes tipos de problemas, onde através de padrões gráficos se torna possível detetar diferentes tipos de erros de posicionamentos e as respetivas causas. O método desenvolvido baseou-se no controle de qualidade dos offsets calculados com os dados de posicionamento e no tempo de chegada das ondas diretas. Com essas duas informações foi possível estabelecer um critério de classificação dos dados de posicionamento quanto à sua qualidade, calcular os erros e obter indícios sobre a sua origem, levando sempre em consideração que os vários fatores têm diferentes influências sobre os erros e que alguns problemas são mais frequentes que outros. Com base neste procedimento, foram estabelecidos critérios de rejeição de dados com erros de posicionamento. As soluções obtidas foram testadas no software RadExPro e Kingdom Suite de modo a avaliar o efeito que esses erros têm sobre a sísmica.
Mestrado em Engenharia Geológica
Книги з теми "UHDRS"
Gegenwart der Einheit: Zum Begriff der Religion : Festschrift anlässliich des 60. Geburtstages Bernhard Uhdes. Freiburg i. Br: Rombach, 2008.
Знайти повний текст джерелаHoke, Sarah. Fritz von Uhdes "Kinderstube": Die Darstellung des Kindes in seinem Spiel- und Wohnmilieu. Universitätsverlag Göttingen, 2011.
Знайти повний текст джерелаV, Carnahan James, and Segan E. G, eds. Effects of leak detection/location on underground heat distribution systems (UHDS) life cycle costs: A probabilistic model. [Champaign, Ill.]: Construction Engineering Research Laboratory, 1991.
Знайти повний текст джерелаЧастини книг з теми "UHDRS"
"„Ich war nie zufällig befreundet“ – Wilhelm Uhdes Vermarktungsstrategien und seine Korrespondenz mit Georg Swarzenski." In Vergessene Körper: Helmut Kolle und Max Beckmann, 81–85. transcript-Verlag, 2015. http://dx.doi.org/10.14361/9783839432815-008.
Повний текст джерелаWilhelm, Miriam. "„Ich war nie zufällig befreundet“ – Wilhelm Uhdes Vermarktungsstrategien und seine Korrespondenz mit Georg Swarzenski." In Vergessene Körper: Helmut Kolle und Max Beckmann, 81–85. transcript Verlag, 2015. http://dx.doi.org/10.1515/9783839432815-008.
Повний текст джерела"„Mein Gott, wie die Zeit vergeht – h ier kennt man kaum Herrn Uhde“ – D ie Rolle Wilhelm Uhdes in der Pariser Kunstszene." In Vergessene Körper: Helmut Kolle und Max Beckmann, 86–91. transcript-Verlag, 2015. http://dx.doi.org/10.14361/9783839432815-009.
Повний текст джерелаEtter, Annika. "„Mein Gott, wie die Zeit vergeht – h ier kennt man kaum Herrn Uhde“ – D ie Rolle Wilhelm Uhdes in der Pariser Kunstszene." In Vergessene Körper: Helmut Kolle und Max Beckmann, 86–91. transcript Verlag, 2015. http://dx.doi.org/10.1515/9783839432815-009.
Повний текст джерелаТези доповідей конференцій з теми "UHDRS"
Winder, Jessica Y., Wilco P. Achterberg, Johan Marinus, Sarah L. Gardiner, and Raymund AC Roos. "F58 Assessment scales for patients with advanced huntington’s disease: comparison of the UHDRS and UHDRS-FAP." In EHDN 2018 Plenary Meeting, Vienna, Austria, Programme and Abstracts. BMJ Publishing Group Ltd, 2018. http://dx.doi.org/10.1136/jnnp-2018-ehdn.159.
Повний текст джерелаSouza, Thierry Kaue Alves Silva, Nara Maria Borges Alves, Fabiana Moraes, Felipe de Paula, Luciana Yasuda Suemitsu, Paula Azevedo, Luiza Piovesana, et al. "Cortical and subcortical atrophy in individuals with Huntington's disease and Huntington-like disease." In XIII Congresso Paulista de Neurologia. Zeppelini Editorial e Comunicação, 2021. http://dx.doi.org/10.5327/1516-3180.551.
Повний текст джерелаBrito, Arthur Gomes Da Silva, Andressa Garcia Tavares Cruz, Gabriela Ribeiro Marques, Thamiris Pereira de Souza, and Leticia Goulart Japiassu. "ANÁLISE DA MUTAÇÃO E FISIOPATOLOGIAS DA DOENÇA DE HUNTINGTON: REVISÃO DE LITERATURA." In I Congresso On-line Nacional de Histologia e Embriologia Humana. Revista Multidisciplinar em Saúde, 2022. http://dx.doi.org/10.51161/rems/3208.
Повний текст джерелаDuarte, H. "Industrial 2D and 3D Ultra High Resolution Seismic (UHRS) Marine Surveying." In 3rd Applied Shallow Marine Geophysics Conference. Netherlands: EAGE Publications BV, 2018. http://dx.doi.org/10.3997/2214-4609.201802676.
Повний текст джерелаGames, K. P., and N. D. Wakefield. "The Successful Design, Development and Acquisition of a UHRS 3D Seismic Dataset." In Near Surface Geoscience 2014 - First Applied Shallow Marine Geophysics Conference. Netherlands: EAGE Publications BV, 2014. http://dx.doi.org/10.3997/2214-4609.20142132.
Повний текст джерелаCox, P., E. K. Mauritzen, A. Fogg, P. Salek, R. Ward, and G. Hulks. "Broadband Processing Across The Uhrs Bandwidth – A Case Study From a Baltic Sea Offshore Windfarm." In NSG2022 28th European Meeting of Environmental and Engineering Geophysics. European Association of Geoscientists & Engineers, 2022. http://dx.doi.org/10.3997/2214-4609.202220152.
Повний текст джерелаThaker, T. P., K. S. Rao, Ganesh W. Rathod, and K. K. Gupta. "DEVELOPMENT OF UHRS AND SWV MODELS FOR SURAT CITY AND SURROUNDING REGION OF GUJARAT, INDIA." In Proceedings of the 3rd and 5th International Conference. WORLD SCIENTIFIC, 2011. http://dx.doi.org/10.1142/9789814365161_0059.
Повний текст джерелаJohnson, James J., Oliver Schneider, Werner Schuetz, Philippe Monette, and Alejandro P. Asfura. "Effects of SSI on EPR™ In-Structure Response for a Rock Site: Coherent and Incoherent High Frequency Ground Motion." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-26072.
Повний текст джерела