Статті в журналах з теми "Tool forming"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Tool forming".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Cser, L., M. Geiger, K. Lange, J. A. G. Kals, and M. Hänsel. "Tool Life and Tool Quality in Bulk Metal Forming." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 207, no. 4 (November 1993): 223–39. http://dx.doi.org/10.1243/pime_proc_1993_207_085_02.
Повний текст джерелаMeier, Horst, V. Smukala, O. Dewald, and Jian Zhang. "Two Point Incremental Forming with Two Moving Forming Tools." Key Engineering Materials 344 (July 2007): 599–605. http://dx.doi.org/10.4028/www.scientific.net/kem.344.599.
Повний текст джерелаMizelle, John Christopher, Teresa Tang, Nikta Pirouz, and Lewis A. Wheaton. "Forming Tool Use Representations: A Neurophysiological Investigation into Tool Exposure." Journal of Cognitive Neuroscience 23, no. 10 (October 2011): 2920–34. http://dx.doi.org/10.1162/jocn_a_00004.
Повний текст джерелаSieczkarek, Peter, Lukas Kwiatkowski, A. Erman Tekkaya, Eugen Krebs, Petra Kersting, W. Tillmann, and Jan Herper. "Innovative Tools to Improve Incremental Bulk Forming Processes." Key Engineering Materials 554-557 (June 2013): 1490–97. http://dx.doi.org/10.4028/www.scientific.net/kem.554-557.1490.
Повний текст джерелаLange, K., L. Cser, M. Geiger, and J. A. G. Kals. "Tool Life and Tool Quality in Bulk Metal Forming." CIRP Annals 41, no. 2 (1992): 667–75. http://dx.doi.org/10.1016/s0007-8506(07)63253-3.
Повний текст джерелаLämsä, Janne, Antti Järvenpää, and Kari Mäntyjärvi. "Designing and Manufacturing of a Flexible Longitudinally Laminated Sandwich Panel Forming Tool." Key Engineering Materials 611-612 (May 2014): 786–93. http://dx.doi.org/10.4028/www.scientific.net/kem.611-612.786.
Повний текст джерелаHerrmann, Marius, Florian Böhmermann, Henning Hasselbruch, Bernd Kuhfuss, Oltmann Riemer, Andreas Mehner, and Hans-Werner Zoch. "Forming without Lubricant – Functionalized Tool Surfaces for Dry Forming Applications." Procedia Manufacturing 8 (2017): 533–40. http://dx.doi.org/10.1016/j.promfg.2017.02.068.
Повний текст джерелаAllaoui, S., J. Launay, D. Soulat, and S. Chatel. "Experimental tool of woven reinforcement forming." International Journal of Material Forming 1, S1 (April 2008): 815–18. http://dx.doi.org/10.1007/s12289-008-0260-4.
Повний текст джерелаLamprecht, M., and M. Leonhartsberger. "Tool Stiffness Calculation in Roll Forming." International Journal of Simulation Modelling 20, no. 1 (March 10, 2021): 40–51. http://dx.doi.org/10.2507/ijsimm20-1-539.
Повний текст джерелаQin, Yi. "Forming-tool design innovation and intelligent tool-structure/system concepts." International Journal of Machine Tools and Manufacture 46, no. 11 (September 2006): 1253–60. http://dx.doi.org/10.1016/j.ijmachtools.2006.01.013.
Повний текст джерелаBedan, Aqeel Sabree, and Halah Ali Habeeb. "Experimental Study the Effect of Tool Geometry on Dimensional Accuracy in Single Point Incremental Forming (SPIF) Process." Al-Nahrain Journal for Engineering Sciences 21, no. 1 (February 10, 2018): 108. http://dx.doi.org/10.29194/njes21010108.
Повний текст джерелаJiang, Wei, Takuya Miura, Masato Okada, Ryo Matsumoto, and Masaaki Otsu. "Improvement of Forming Limit in Height with Alternating Tool Path in Penetrating Tool Friction Stir Incremental Forming." MATERIALS TRANSACTIONS 61, no. 5 (May 1, 2020): 1000–1007. http://dx.doi.org/10.2320/matertrans.p-m2020807.
Повний текст джерелаHam, M., B. M. Powers, and J. Loiselle. "Surface Topography from Single Point Incremental Forming Using an Acetal Tool." Key Engineering Materials 549 (April 2013): 84–91. http://dx.doi.org/10.4028/www.scientific.net/kem.549.84.
Повний текст джерелаWang, Yan Tao. "Design of Rolling Tool System for Fin Forming Machine." Applied Mechanics and Materials 44-47 (December 2010): 512–16. http://dx.doi.org/10.4028/www.scientific.net/amm.44-47.512.
Повний текст джерелаWu, S. H., Ana Reis, F. M. Andrade Pires, Abel D. Santos, and A. Barata da Rocha. "Study of Tool Trajectory in Incremental Forming." Advanced Materials Research 472-475 (February 2012): 1586–91. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.1586.
Повний текст джерелаHAYASHI, Kazuo, and Kenji FUCHIWAKI. "Net Shape Forming Tool Technology of Fineblanking." Journal of the Japan Society for Technology of Plasticity 51, no. 592 (2010): 400–404. http://dx.doi.org/10.9773/sosei.51.400.
Повний текст джерелаMORAVEC, J�n. "Unconventional cavity forming using a machine tool." HUTNIK - WIADOMOŚCI HUTNICZE 1, no. 9 (August 10, 2016): 39–43. http://dx.doi.org/10.15199/24.2016.9.11.
Повний текст джерелаMojžíšek, Martin. "Triplex Forming Oligonucleotides – Tool for Gene Targeting." Acta Medica (Hradec Kralove, Czech Republic) 47, no. 3 (2004): 151–56. http://dx.doi.org/10.14712/18059694.2018.82.
Повний текст джерелаKolokoltseva, E. V. "Mass Media As Forming Public Opinion Tool." Contemporary problems of social work 3, no. 3 (June 27, 2017): 74–81. http://dx.doi.org/10.17922/2412-5466-2017-3-3-74-81.
Повний текст джерелаten Thije, R. H. W., R. Akkerman, L. van der Meer, and M. P. Ubbink. "Tool-ply friction in thermoplastic composite forming." International Journal of Material Forming 1, S1 (April 2008): 953–56. http://dx.doi.org/10.1007/s12289-008-0215-9.
Повний текст джерелаAlves, L. M., and P. A. F. Martins. "Flexible forming tool concept for producing crankshafts." Journal of Materials Processing Technology 211, no. 3 (March 2011): 467–74. http://dx.doi.org/10.1016/j.jmatprotec.2010.10.024.
Повний текст джерелаAndersson, A. "Comparison of sheet-metal-forming simulation and try-out tools in the design of a forming tool." Journal of Engineering Design 15, no. 6 (December 2004): 551–61. http://dx.doi.org/10.1080/09544820410001697598.
Повний текст джерелаGiedenbacher, Jochen, Anna Elisabeth Raab, Christian Walch, and Aziz Huskic. "The Quantification of Galling in Forming Operations of Hot Dip Galvanized Sheet Metal under Laboratory Conditions." Materials Science Forum 879 (November 2016): 607–12. http://dx.doi.org/10.4028/www.scientific.net/msf.879.607.
Повний текст джерелаMeier, Horst, and Christian Magnus. "Incremental Sheet Metal Forming with Direct Resistance Heating Using Two Moving Tools." Key Engineering Materials 554-557 (June 2013): 1362–67. http://dx.doi.org/10.4028/www.scientific.net/kem.554-557.1362.
Повний текст джерелаMüller, Roland, and André Mosel. "Characterisation of Tool Coatings for Press Hardening." Advanced Materials Research 966-967 (June 2014): 259–69. http://dx.doi.org/10.4028/www.scientific.net/amr.966-967.259.
Повний текст джерелаBraeuer, Guenter, Hanno Paschke, Martin Weber, Bernd Arno Behrens, and Timur Yilkiran. "Surface Modifications for Optimized Forming Operations." Key Engineering Materials 611-612 (May 2014): 231–39. http://dx.doi.org/10.4028/www.scientific.net/kem.611-612.231.
Повний текст джерелаOtsu, Masaaki, Yosuke Katayama, and Takayuki Muranaka. "Effect of Difference of Tool Rotation Direction on Forming Limit in Friction Stir Incremental Forming." Key Engineering Materials 622-623 (September 2014): 390–97. http://dx.doi.org/10.4028/www.scientific.net/kem.622-623.390.
Повний текст джерелаBaptista, Rui, M. Beatriz Silva, and Carlos Saraiva. "Developments for Rapid Tooling Application in Sheet Metal Forming." Materials Science Forum 514-516 (May 2006): 1516–20. http://dx.doi.org/10.4028/www.scientific.net/msf.514-516.1516.
Повний текст джерелаDien, Le Khanh, Nguyen Van Thanh, and Nguyen Tan Hung. "A research on a new structure of forming tool in Single Point Incremental Forming (SPIF)." Science & Technology Development Journal - Engineering and Technology 3, SI1 (August 17, 2020): SI157—SI163. http://dx.doi.org/10.32508/stdjet.v3isi1.757.
Повний текст джерелаJeswiet, J., David J. Young, and M. Ham. "Non-Traditional Forming Limit Diagrams for Incremental Forming." Advanced Materials Research 6-8 (May 2005): 409–16. http://dx.doi.org/10.4028/www.scientific.net/amr.6-8.409.
Повний текст джерелаHundt, Tobias, Carsten Schmidt, Berend Denkena, Kevin Engel, and Peter Horst. "Variable Forming Tool and Process for Thermoset Prepregs with Simulation Verified Part Quality." Key Engineering Materials 611-612 (May 2014): 391–98. http://dx.doi.org/10.4028/www.scientific.net/kem.611-612.391.
Повний текст джерелаAbdupattoev, Mukhammadtokhir Tojimamatovich. "Unusual Connections As Forming Literary Text." American Journal of Social Science and Education Innovations 03, no. 02 (February 27, 2021): 177–82. http://dx.doi.org/10.37547/tajssei/volume03issue02-28.
Повний текст джерелаPujante, Jaume, Borja González, and Eduard Garcia-Llamas. "Pilot Demonstration of Hot Sheet Metal Forming Using 3D Printed Dies." Materials 14, no. 19 (September 30, 2021): 5695. http://dx.doi.org/10.3390/ma14195695.
Повний текст джерелаCho, C., and Y. J. Kim. "Study on forming condition and tool of flywheel by using flow forming process." Materials Research Innovations 15, sup1 (February 2011): s336—s339. http://dx.doi.org/10.1179/143307511x12858957674599.
Повний текст джерелаPark, Ji-Woo, Tae-Wan Ku, Jeong Kim, Kwang-Ho Kim, and Beom-Soo Kang. "Tool fabrication for composite forming of aircraft winglet using multi-point dieless forming." Journal of Mechanical Science and Technology 30, no. 5 (May 2016): 2203–10. http://dx.doi.org/10.1007/s12206-016-0428-7.
Повний текст джерелаDubovská, Rozmarína, and Jozef Majerik. "Modeling and Virtual Simulation of Hard Surface Milling and Forming Process Using Advanced CAE Systems." Advanced Materials Research 941-944 (June 2014): 2321–31. http://dx.doi.org/10.4028/www.scientific.net/amr.941-944.2321.
Повний текст джерелаAksenov, L. B., and I. Y. Kononov. "Thin Sheet Forming with 3D Printed Plastic Tool." Solid State Phenomena 299 (January 2020): 705–10. http://dx.doi.org/10.4028/www.scientific.net/ssp.299.705.
Повний текст джерелаTröber, Philipp, Markus Welm, Hannes Alois Weiss, Peter Demmel, Roland Golle, and Wolfram Volk. "The influence of process parameters on the temperature development in the forming zone." MATEC Web of Conferences 190 (2018): 14004. http://dx.doi.org/10.1051/matecconf/201819014004.
Повний текст джерелаTröber, Philipp, Markus Welm, Hannes Alois Weiss, Peter Demmel, Roland Golle, and Wolfram Volk. "The influence of process parameters and sheet material on the temperature development in the forming zone." Manufacturing Review 6 (2019): 9. http://dx.doi.org/10.1051/mfreview/2019005.
Повний текст джерелаMynors, Diane J., Martin English, and Michael Castellucci. "Automating the Design of Cold Roll Forming Roll Sets." Key Engineering Materials 410-411 (March 2009): 227–33. http://dx.doi.org/10.4028/www.scientific.net/kem.410-411.227.
Повний текст джерелаSieczkarek, Peter, Lukas Kwiatkowski, A. Erman Tekkaya, Eugen Krebs, Dirk Biermann, Wolfgang Tillmann, and Jan Herper. "Improved Tool Surfaces for Incremental Bulk Forming Processes of Sheet Metals." Key Engineering Materials 504-506 (February 2012): 975–80. http://dx.doi.org/10.4028/www.scientific.net/kem.504-506.975.
Повний текст джерелаHAYAKAWA, Kunio. "Workpiece-Tool Coupled Analysis on Bulk Forming Process." Journal of the Japan Society for Technology of Plasticity 57, no. 661 (2016): 90–94. http://dx.doi.org/10.9773/sosei.57.90.
Повний текст джерелаNeugebauer, Reimund, Verena Psyk, and Christian Scheffler. "A Novel Tool Design Strategy for Electromagnetic Forming." Advanced Materials Research 1018 (September 2014): 333–40. http://dx.doi.org/10.4028/www.scientific.net/amr.1018.333.
Повний текст джерелаBagudanch, Isabel, Rogelio Pérez-Santiago, and Maria Luisa García-Romeu. "Tool Path Strategies for Single Point Incremental Forming." Key Engineering Materials 473 (March 2011): 905–12. http://dx.doi.org/10.4028/www.scientific.net/kem.473.905.
Повний текст джерелаJiang, Wei, Takuya Miura, Masaaki Otsu, Masato Okada, Ryo Matsumoto, Hidenori Yoshimura, and Takayuki Muranaka. "Development of Penetrating Tool Friction Stir Incremental Forming." MATERIALS TRANSACTIONS 60, no. 11 (November 1, 2019): 2416–25. http://dx.doi.org/10.2320/matertrans.p-m2019841.
Повний текст джерелаMartínez-Romero, Oscar, María Luisa García-Romeu, Daniel Olvera-Trejo, Isabel Bagudanch, and Alex Elías-Zúñiga. "Tool Dynamics During Single Point Incremental Forming Process." Procedia Engineering 81 (2014): 2286–91. http://dx.doi.org/10.1016/j.proeng.2014.10.322.
Повний текст джерелаDurgun, Ismail. "Sheet metal forming using FDM rapid prototype tool." Rapid Prototyping Journal 21, no. 4 (June 15, 2015): 412–22. http://dx.doi.org/10.1108/rpj-01-2014-0003.
Повний текст джерелаOTSU, Masaaki, Seiya ICHIKAWA, and Takayuki MURANAKA. "501 Friction stir incremental forming with inclined tool." Proceedings of the Materials and processing conference 2013.21 (2013): _501–1_—_501–4_. http://dx.doi.org/10.1299/jsmemp.2013.21._501-1_.
Повний текст джерелаThiruvarudchelvan, S. "A urethane clamp as a metal-forming tool." Journal of Materials Processing Technology 38, no. 3 (May 1993): 491–500. http://dx.doi.org/10.1016/0924-0136(93)90065-e.
Повний текст джерелаOraon, Manish. "Tool wear in the single point incremental forming." Materials Today: Proceedings 56 (2022): 1738–42. http://dx.doi.org/10.1016/j.matpr.2021.10.454.
Повний текст джерела