Добірка наукової літератури з теми "Tolérance méthodologique"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Зміст
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Tolérance méthodologique".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Tolérance méthodologique"
Istratii, Romina. "An ethnographic look into conjugal abuse in Ethiopia: a study from the Orthodox Täwahәdo community of Aksum through the local religio-cultural framework". Annales d'Ethiopie 33, № 1 (2020): 253–300. http://dx.doi.org/10.3406/ethio.2020.1700.
Повний текст джерелаMARINO, I., E. FERRAND DEVOUGE, E. GOUPILLE, T. PRESSAT LAFFOUILHERE, H. VAILLANT, and R. BOUSSAGEON. "Revue systématique de la littérature évaluant l’efficacité du lorazépam dans le traitement de l’insomnie primaire et secondaire." EXERCER 35, no. 203 (May 1, 2024): 222–29. http://dx.doi.org/10.56746/exercer.2024.203.222.
Повний текст джерелаBoespflug, François. "Brève histoire de la caricature des figures majeures du christianisme." Thème 17, no. 2 (July 6, 2010): 85–110. http://dx.doi.org/10.7202/044064ar.
Повний текст джерелаInsiata, Goïta Ouattara Kanndanan. "Les notions du vivre-ensemble dans les manuels scolaires de l’enseignement de base en Côte d’Ivoire et leurs perceptions par les acteurs." Articles 48, no. 1 (September 19, 2013): 115–29. http://dx.doi.org/10.7202/1018404ar.
Повний текст джерелаSossou, Ericie, Mireille Noukpokinnou, Victoire Agueh, Christophe Gandonou, Latifou Lagnika, Akadiri Yessoufou, and Hyacinthe Ahissou. "Évaluation de la composition nutritionnelle des lignées d’amarante (Amaranthus cruentus) à productivité et tolérance à la salinité élevées." Journal of Applied Biosciences 184 (April 30, 2023): 19333–48. http://dx.doi.org/10.35759/jabs.183.7.
Повний текст джерелаHassani, Abdessalem, Nizar Aifaoui, Abdelmajid Benamara, and Serge Samper. "Méthodologie d'analyse et d'optimisation des tolérances dans un contexte de conception intégrée : TOL_ANALYSES." Mécanique & Industries 9, no. 5 (September 2008): 381–95. http://dx.doi.org/10.1051/meca/2009002.
Повний текст джерелаVazquez-Rodriguez, G. A., and J. L. Rolst. "Étude du processus de nitratation avec des boues activées : effet inhibiteur de l'ammoniac sur les bactéries nitratantes." Revue des sciences de l'eau 10, no. 3 (April 12, 2005): 359–75. http://dx.doi.org/10.7202/705284ar.
Повний текст джерелаKadiané-Oussou, NJ, and Et Al. "Devenir à douze mois des patients infectés par le virus de l’immunodéficience 1 initiant le dolutégravir à Bouaké (Côte D’Ivoire) de 2020 à 2021." Revue Malienne d'Infectiologie et de Microbiologie 18, no. 2 (January 8, 2024): 50–56. http://dx.doi.org/10.53597/remim.v18i2.2734.
Повний текст джерелаPOUCHAIN, D., G. LE ROUX, and R. BOUSSAGEON. "ANALYSE DES DONNEES PUBLIEES SUR LE VACCIN ASTRAZENECA AZD1222 COMME MOYEN DE PREVENIR LE COVID-19." EXERCER 32, no. 171 (March 1, 2021): 128–33. http://dx.doi.org/10.56746/exercer.2021.171.128.
Повний текст джерелаMainhagu, Sébastien, and Yves Moulin. "Les antécédents de l’expression d’émotions dans un centre d’appels." Articles 69, no. 1 (April 4, 2014): 87–114. http://dx.doi.org/10.7202/1024208ar.
Повний текст джерелаДисертації з теми "Tolérance méthodologique"
Chamseddine, Abbas. "Méthodologie de diagnostic et tolérance aux défauts de systèmes complexes." Aix-Marseille 3, 2007. http://www.theses.fr/2007AIX30048.
Повний текст джерелаThe aim of this work is to propose a methodology of fault diagnosis and fault-tolerant control for complex systems. In this work, both sensor and actuator faults are considered. The problem of complex systems instrumentation is studied. In a first step, we design a minimal number sensor network ensuring the system observability. This minimal number network verifies system's observability but it is not robust in the presence of sensor faults: the breakdown of one sensor may lead to the loss of system's observability. We propose then an approach to design a robust sensor network. Finally, we propose a methodology to design a sensor network ensuring the diagnosability of actuator faults in complex systems. These approaches are formulated as nonlinear binary optimization problems. They are illustrated and validated in simulation using a realistic model of vehicle active suspension
Yettou, Abdelhalim. "Méthodologie de conversion des spécifications géométriques de tolérance en zones d'incertitude." Mémoire, Université de Sherbrooke, 2011. http://savoirs.usherbrooke.ca/handle/11143/1624.
Повний текст джерелаMarkvoort, Laurent. "Méthodologie d'analyse statistique de tolérances dans les assemblages impliquant des composants déformables." Valenciennes, 2007. https://ged.uphf.fr/nuxeo/site/esupversions/fcddf462-542e-4eb5-b6a5-a98acbaaeab5.
Повний текст джерелаThe thesis justifies and details an original methodology for performing statistical tolerance analysis taking into account the compliance of components within a mechanical assembly. The methodology, called STA-DEF, combines a statistical tolerance analysis (STA) based on a Monte Carlo simulation, and a Finite Element Analysis of the deformations (DEF) occurring on the components of the assembly due to mounting or operational constraints. The method uses, for input, an assembly model, a proposed tolerancing scheme, one or several functional condition(s) to be checked and some knowledge about the assembly process (sequence and technology). For output, the method generates a statistical distribution of the functional conditions, as well as an ordered list of contributors, i. E. : of the tolerances having a significant influence on the condition. The computation of contributors uses the FAST sensitivity analysis method, applied on a response surface determined by means of the inputs of STA-DEF and the distributions of the verified functional conditions. This method has been implemented on the basis of usual software tools (such as eM-tolmate, Abaqus, SimLab) supplemented with specific developments on Matlab. An industrial case study (a pressure sensor in a commonrail injection system) has been successfully analyzed to validate the method and the prototype
Caux, Mickael. "Méthodologie de maîtrise des variations géométriques des produits en conception, fabrication et contrôle dans le contexte de l'usine numérique." Phd thesis, École normale supérieure de Cachan - ENS Cachan, 2012. http://tel.archives-ouvertes.fr/tel-00777192.
Повний текст джерелаKhelassi, Ahmed. "Nouvelle méthodologie de synthèse de lois de commande tolérante aux fautes garantissant la fiabilité des systèmes." Electronic Thesis or Diss., Nancy 1, 2011. http://www.theses.fr/2011NAN10041.
Повний текст джерелаThe works developed in this thesis deal with the active fault tolerant control design incorporating actuators reliability. This new methodology requires the adaptation of the reliability analysis tools with the system control field. The explicit integration of load in the actuators reliability models is considered. First, the reconfigurability analysis of fault tolerant control systems is treated. A reliable reconfigurability analysis based on the energy consumption with respect to overall system reliability is presented. A reconfigurability index which defines the functional limitation of the system is proposed based on fault severity and actuators reliability degradation. The second part of the developed works is devoted to control allocation and re-allocation. Two approaches of control re-allocation are proposed by taking into consideration actuator degradation health. The control inputs are applied to the system with respect to actuators reliability and faults. The third part contributes to a fault tolerant controller design incorporating actuator criticality. A sensitivity analysis of the overall system reliability and criticality indicator are proposed. A new method of active fault tolerant control is developed with Linear Matrix Inequality (LMI) formulation based on actuator criticality
Khelassi, Ahmed. "Nouvelle méthodologie de synthèse de lois de commande tolérante aux fautes garantissant la fiabilité des systèmes." Phd thesis, Université Henri Poincaré - Nancy I, 2011. http://tel.archives-ouvertes.fr/tel-00618655.
Повний текст джерелаPira, Clément. "Une méthodologie pour appréhender la décision collective dans des systèmes multiagents sujets aux défaillances." Paris 6, 2009. http://www.theses.fr/2009PA066771.
Повний текст джерелаBougerol, Antonin. "Modes de défaillance induits par l'environnement radiatif naturel dans les mémoires DRAMs : étude, méthodologie de test et protection." Phd thesis, Université de Grenoble, 2011. http://tel.archives-ouvertes.fr/tel-00610137.
Повний текст джерелаJallouli, Mehdi. "Méthodologie de conception d'architectures de processeur sûres de fonctionnement pour les applications mécatroniques." Thesis, Metz, 2009. http://www.theses.fr/2009METZ006S/document.
Повний текст джерелаNowadays, embedded systems are becoming increasingly attractive for many applications. Furthermore, these systems should be more and more dependable. Indeed, systems such as mechatronic or automatically controlled ones often work in harsh environmental conditions making them more prone to errors due to disturbances. Thus, designers should consider ways to protect them against such errors. In this work, a special interest is dedicated to processor architecture dependability as we consider processor-based systems. The stack computer philosophy has been chosen for the processor architecture in order to achieve a good trade-off between simplicity and effectiveness. Our approach to introduce and evaluate the dependability is based on the development and the use of a software emulator of the processor to be designed. Dependability of the processor is ensured through the collaborative use of hardware and software protection techniques: hardware error detection means and software error correction means. The correction technique is implemented in benchmarks and is validated on the emulator through a simulation of various scenarios of errors appearance. Different parameters are evaluated such as correction capability and time overhead. This correction technique is independent from the target application and from the detection means, what confirms the methodological aspect of our approach. Otherwise, as requested by the CIM’tronic project, we integrated our work with the CRAN Nancy/A3SI Metz one by applying the information flow approach on the processor instruction set. We showed the ability of this approach to evaluate the whole processor/application dependability
Jallouli, Mehdi. "Méthodologie de conception d'architectures de processeur sûres de fonctionnement pour les applications mécatroniques." Electronic Thesis or Diss., Metz, 2009. http://docnum.univ-lorraine.fr/public/UPV-M/Theses/2009/Jallouli.Mehdi.SMZ0906.pdf.
Повний текст джерелаNowadays, embedded systems are becoming increasingly attractive for many applications. Furthermore, these systems should be more and more dependable. Indeed, systems such as mechatronic or automatically controlled ones often work in harsh environmental conditions making them more prone to errors due to disturbances. Thus, designers should consider ways to protect them against such errors. In this work, a special interest is dedicated to processor architecture dependability as we consider processor-based systems. The stack computer philosophy has been chosen for the processor architecture in order to achieve a good trade-off between simplicity and effectiveness. Our approach to introduce and evaluate the dependability is based on the development and the use of a software emulator of the processor to be designed. Dependability of the processor is ensured through the collaborative use of hardware and software protection techniques: hardware error detection means and software error correction means. The correction technique is implemented in benchmarks and is validated on the emulator through a simulation of various scenarios of errors appearance. Different parameters are evaluated such as correction capability and time overhead. This correction technique is independent from the target application and from the detection means, what confirms the methodological aspect of our approach. Otherwise, as requested by the CIM’tronic project, we integrated our work with the CRAN Nancy/A3SI Metz one by applying the information flow approach on the processor instruction set. We showed the ability of this approach to evaluate the whole processor/application dependability
Книги з теми "Tolérance méthodologique"
Imre Lakatos: L'heuristique et la tolérance méthodologique. MultiMedia Publishing, 2020.
Знайти повний текст джерела