Книги з теми "Titanium and composite materials"

Naik, Rajiv A. Observations of fatigue crack initiation and damage growth in notched titanium matrix composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

Ant︠s︡iferov, V. N. Kompozit︠s︡ionnye materialy i konstrukt︠s︡ii na osnove titana i ego soedineniĭ: Monografii︠a︡. Novosibirsk: In-t gidrodinamiki im. M.A. Lavrentʹeva SO RAN, 2001.

1935-, Wightman James P., and Langley Research Center. Materials Division., eds. Fracture surface analysis in composite and titanium bonding: Semi-annual report. Blacksburg, VA: Chemistry Dept., Virginia Polytechnic Institute & State University, 1985.

Davim, J. Paulo, R. Zitoune, and V. Krishnaraj. Machining of titanium alloys and composites for aerospace applications: Special topic volume with invited peer reviewed papers only. Durnten-Zurich: Trans Tech Publications, 2013.

Ltjering, G. Titanium. Berlin: Springer, 2003.

H, Froes F., Suryanarayana C, Ward-Close C. M, ASM International. Materials Synthesis and Processing Committee., Minerals, Metals and Materials Society. Materials Design and Manufacturing Division., and Minerals, Metals and Materials Society. Fall Meeting, eds. Synthesis/processing of lightweight metallic materials: Proceedings of a symposium held during the TMS annual meeting in Las Vegas, Nevada, February 13-16, 1995. Warrendale, Pa: The Society, 1995.

S, Johnson W., and Langley Research Center, eds. Modeling fatigue crack growth in cross ply titanium matrix composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1993.

O, Soboyejo W., Srivatsan T. S, Davidson D. L, and Minerals, Metals and Materials Society. Structural Materials Division., eds. Fatigue and fracture of ordered intermetallic materials I: Proceedings of a symposium sponsored by the Structural Materials Division (SMD) of the Minerals, Metals & Materials Society (TMS), held during Materials Week '93 in Pittsburgh, PA, October 17-21, 1993 hosted by the Materials, Metals & Materials Society (TMS), and the Materials Information Society (ASM International). Warrendale, Pa: Minerals, Metals & Materials Society, 1994.

United States. National Aeronautics and Space Administration., ed. Isothermal fatigue behavior of a [90] Sic/Ti-15-3 composite at 426 C. [Washington, D.C.]: NASA, 1991.

A, Bartolotta P., and United States. National Aeronautics and Space Administration., eds. Failure mechanisms during isothermal fatigue of SiC/Ti-24Al-11Nb composites. [Washington, D.C: National Aeronautics and Space Administration, 1995.

Johnson, W. S. Fatigue damage growth mechanisms in continuous fiber reinforced titanium matrix composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

Johnson, W. S. Fatigue damage growth mechanisms in continuous fiber reinforced titanium matrix composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

United States. National Aeronautics and Space Administration., ed. Thermomechanical fatigue damage/failure mechanisms in SCS-6/timetal 21S [0/90]s composite. [Washington, DC]: National Aeronautics and Space Administration, 1994.

H, Froes F., Storer J, and Materials Week '94 (1994 : Rosemont, Ill.)., eds. Recent advances in titanium metal matrix composites: Proceedings of a symposium held during Materials Week, October 2-6, 1994, in Rosemont, Illinois. Warrendale, Pa: TMS, 1995.

S, Johnson W., and Langley Research Center, eds. Matrix fatigue crack development in a notched continuous fiber SCS-6/Ti-15-3 composite. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

W, Lee Eui, Minerals, Metals and Materials Society. Meeting, and Minerals, Metals and Materials Society. Non-ferrous Metals Committee., eds. Light weight alloys for aerospace applications IV: Proceedings of the fourth "Light Weight Alloys for Aerospace Applications" Symposium : held February 10-13, 1997, during the 1997 TMS Annual Meeting in Orlando, Florida. Warrendale, Pa: Minerals, Metals & Materials Society, 1997.

Kevin, Rivers H., Smith Russell W, and Langley Research Center, eds. Thermal output of WK-type strain gauges on various materials at cryogenic and elevated temperatures. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.

Kevin, Rivers H., Smith Russell W, and Langley Research Center, eds. Thermal output of WK-type strain gauges on various materials at cryogenic and elevated temperatures. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.

Victor, Lukaszewicz, DellaCorte Christopher, and United States. National Aeronautics and Space Administration., eds. The tribology of PS212 coatings and PM212 composites for the lubrication of titanium 6Al-4V components of a Stirling engine space power system. [Washington, DC]: National Aeronautics and Space Administration, 1994.

Nielsen, Lauge Fuglsang. Composite Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/978-3-540-27680-7.

Chawla, Krishan K. Composite Materials. New York, NY: Springer New York, 1998. http://dx.doi.org/10.1007/978-1-4757-2966-5.

Berthelot, Jean-Marie. Composite Materials. New York, NY: Springer New York, 1999. http://dx.doi.org/10.1007/978-1-4612-0527-2.

Kar, Kamal K., ed. Composite Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-662-49514-8.

Chawla, Krishan K. Composite Materials. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-28983-6.

Chawla, Krishan Kumar. Composite Materials. New York, NY: Springer New York, 1987. http://dx.doi.org/10.1007/978-1-4757-3912-1.

Chung, Deborah D. L. Composite Materials. London: Springer London, 2003. http://dx.doi.org/10.1007/978-1-4471-3732-0.

Nicolais, Luigi, Michele Meo, and Eva Milella, eds. Composite Materials. London: Springer London, 2011. http://dx.doi.org/10.1007/978-0-85729-166-0.

Chung, Deborah D. L. Composite Materials. London: Springer London, 2010. http://dx.doi.org/10.1007/978-1-84882-831-5.

Chawla, Krishan K. Composite Materials. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-0-387-74365-3.

Schwartz, M. M. Composite materials. Upper Saddle River, N.J: Prentice Hall PTR, 1997.

Havas, George D. Composite materials. Washington, D.C: Science Reference Section, Science and Technology Division, Library of Congress, 1986.

Schwartz, Mel M. Composite materials. Upper Saddle River, N.J: Prentice Hall PTR, 1997.

Blake, Jill. Composite materials. Cambridge: Hobsons, 1989.

Velmurugan, R., Dong Ruan, and S. Gurusideswar. Composite Materials. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003352358.

Wisner, Brian, Simona E. Hunyadi Murph, Ioannis N. Mastorakos, and Muralidharan Paramsothy, eds. Composite Materials. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-50180-7.

Advisory Group for Aerospace Research and Development. Structures and Materials Panel. Meeting,, ed. Characterisation of fiber reinforced titanium matrix composites: Papers presented at the 77th Meeting of the AGARD Structures and Materials Panel, held in Bordeaux, France, 27th-28th September 1993. Neuilly sur Seine: Agard, 1994.

S, Majumdar Bhaskar, and United States. National Aeronautics and Space Administration., eds. In-phase thermomechanical fatigue mechanisms in an unidirectional SCS-6/Ti 15-3 MMC. [Washington, DC]: National Aeronautics and Space Administration, 1995.

S, Majumdar Bhaskar, and United States. National Aeronautics and Space Administration., eds. In-phase thermomechanical fatigue mechanisms in an unidirectional SCS-6/Ti 15-3 MMC. [Washington, DC]: National Aeronautics and Space Administration, 1995.

S, Majumdar Bhaskar, and United States. National Aeronautics and Space Administration., eds. In-phase thermomechanical fatigue mechanisms in an unidirectional SCS-6/Ti 15-3 MMC. [Washington, DC]: National Aeronautics and Space Administration, 1995.

Koohgilani, Mehran. Advanced composite materials: Composite material's history. Poole: Bournemouth University, 2001.

Koohgilani, Mehran. Advanced composite materials: Composite repair systems. Poole: Bournemouth University, 2001.

Brigante, Domenico. New Composite Materials. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-01637-5.

Kalia, Susheel, ed. Lignocellulosic Composite Materials. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-68696-7.

Pilato, Louis A., and Michael J. Michno. Advanced Composite Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-662-35356-1.

Tiwari, Ashutosh, Mohammad Rabia Alenezi, and Seong Chan Jun, eds. Advanced Composite Materials. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119242666.

National, Seminar on "Composite Materials Manufacturing Processing Evaluation Application and Technologies" (1998 National Metallurgical Laboratory). Proceedings, composite materials. Jamshedpur: National Metallurgical Laboratory [&] Materials Research Society of India, 1998.

A, Kelly, and Zweben Carl H, eds. Comprehensive composite materials. Amsterdam: Elsevier, 2000.

Institute of Materials (London, England), ed. Engineering composite materials. 2nd ed. London: IOM, 1999.

Williams, James C., and Gerd Lütjering. Titanium (Engineering Materials and Processes). Springer, 2003.

Lütjering, Gerd, and Williams James C. Titanium. Springer London, Limited, 2007.