Готові списки джерел за темами / TISM / Дисертації

Дисертації з теми "TISM"

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: TISM.
Автор: Grafiati
Опубліковано: 6 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 дисертацій для дослідження на тему "TISM".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Santos, Ana Camila Santos dos. "Produção de eletrodos por modificações superficiais de Ti e caracterização do seu desempenho na intercalação de Li+." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2013. http://hdl.handle.net/10183/143823.

Повний текст джерела
Анотація:
Neste trabalho foram estudadas diferentes modificações superficiais do titânio (Ti) como método de preparação de superfícies de eletrodos para baterias de íons lítio (Li+) Inicialmente, as modificações foram produzidas pelas micro-indentações, com posterior corrosão eletroquímica por pites em soluções de brometo. As superfícies polidas, tratadas termicamente e modificadas através de micro-indentações foram avaliadas em diferentes parâmetros, tais como o potencial aplicado, concentração dos íons agressivos no eletrólito, temperatura, tempo dos testes e principalmente, sobre o impacto das deformações causadas pela força indentações para localização de orifícios produzidos por pites. Filmes porosos de titânia (TiO2) crescidos sobre o Ti puro, foram produzidos por anodização a plasma (anodização por centelhamento ou sparking) em 1M H3PO4 e em 1M Na2SO4 e por anodização nanotubular em 1M H3PO4 + 1M NaOH + 0,4 %(peso) HF. Os resultados mostraram, em óxidos tipo “esponja” formados na anodização a plasma em 1M H3PO4 e 1M Na2SO4, a incorporação de elementos do eletrólito contendo, respectivamente, P e S, numa relação de P/O > S/O e em óxidos nanotulares, a predominante incorporação de elemento de F. Posteriormente, as superfícies corroídas por pites e as superfícies de óxidos crescidos por anodização a plasma foram convertidas por sulfetação em diferentes materiais micro e nanoestruturados compostos por sulfetos e oxisulfetos de titânio, ajustando-se as condições de processo. O desenvolvimento proposto mostrou que é possível modificar a composição química do óxido formado por anodização a plasma para nanocristais de TiS2, nanofitas de TiS3 e TiOxSy, sem danificar a morfologia original dos nanoporos de TiO2. Os compostos formados podem ser usados como eletrodos nanoarquiteturados tridimensionais (3D) para microbaterias de íons lítio (Li+) com alta densidade de potência. A síntese desses compostos é realmente promissora, porque eles têm a capacidade de inserir mais íons lítio do que TiO2 puro, resultando em uma melhoria na capacidade das microbaterias.
In this study, different surface modifications of titanium (Ti) were studied as a method of surface preparation of electrodes for ion lithium batteries (Li+). Initially, the modifications were produced by micro-indentation with subsequent electrochemical pitting corrosion in solutions of bromide. The polished surfaces, heat treated and modified through micro indentations were evaluated for different values of parameters, such as applied potential, concentration of aggressive ions in the electrolyte, temperature, polarization time, and mainly intensity of the deformation caused by indentations for localizing holes produced by pitting. It was expected the adjust of location of these parameter settings promotes nucleation of pits, according to the pattern of indentations and growth of pitting depth for increased surface area. Porous films of titania (TiO2) were produced on pure Ti by plasma anodization (or sparking) in 1M H3PO4 and 1M Na2SO4. Nanotubes were synthesized by porous anodization in 1M NaOH + 1M H3PO4 + 0.4 (wt%) HF. The results showed oxide "sponge" like formed by plasma anodization, incorporating elements of the electrolyte containing respectively, P and S in a ratio P/O> S/O and, in nanotubular oxides, with predominant incorporation of F. Subsequently, the pitted surfaces and the surfaces of oxides grown by plasma anodization were converted by sulfidation into different micro and nanostructured materials consisting of titanium sulfide and oxisulfides by adjusting the process conditions. The proposed development has shown that it is possible to modify the chemical composition of the oxide formed by plasma anodizing to nanocrystals of TiS2 and nanobelts of TiS3 and TiOxSy without damaging the original morphology of the nanoporous TiO2. The formed compounds can be used as three-dimensional (3D) nanoarchitectured electrodes for ion lithium batteries (Li+) with high power density. The synthesis of these compounds is promising due to a higher ability to intercalate more ions lithium than pure TiO2, resulting in an improvement in the capacity of microbatteries.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Kabelková, Markéta. "Materiálový tisk světelných dozimetrů." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2019. http://www.nusl.cz/ntk/nusl-401915.

Повний текст джерела
Анотація:
This diploma thesis is focused on material printing of light dosimeters, especially printing of dosimeters for visible light and two types of UV radiation dosimeters. The aim of this work was to convert optimized systems from laboratory scale to pilot plant and to prepare individual systems for large-scale printing. The experimental part deals with the preparation and gradual scaling of compositions to a pilot scale, including optimization of individual components. Problems which were found during scaling up are discussed. A roll-to-roll material printer with slot-die technique was used to convert to a pilot scale. The prepared layers were exposed and their color changes was studied in detail. In addition to printing optimization, the thicknesses of the prepared layers and their resistance were determined, as well as tests of shelf life and reaction of dosimeters to ozone. According to the tests which were performed, guidelines for quality control of light dosimeters printing were compiled.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Petříčková, Zuzana. "Materiálový tisk ozonových dozimetrů." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2019. http://www.nusl.cz/ntk/nusl-401916.

Повний текст джерела
Анотація:
This study presents various methods of measuring ozone and consolidates current state of knowledge in the field of disposable printed ozone dosimeters. The paper also identifies prospective dyes for preparation of ozone dosimeters available on the market. Information gathered from literature review was used to prepare dosimeters based on two different dyes. These were calibrated for screen printing technology and their sensitivity to ozone was optimized to achieve visual detectability. Prepared samples were observed and studied while being exposed to ozone. Then, long term mechanical and chemical properties of these were tested in order to identify appropriate conditions for storage.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Azariová, Viktória. "Tisk up-konverzních značek." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2019. http://www.nusl.cz/ntk/nusl-401917.

Повний текст джерела
Анотація:
The subject of this these is a preparation and printing of upconversion marks that have been printed by two printing techniques, namely screen printing and pad printing. The makrs were designed to visualize another chemical code identifiable by instrumentation. The impact of chemical code components on the fluorescence intensity of upconversion marks and the impact of individual components on printability and print sustainability were studied. The upconversion pigment was excited by NIR laser.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Kašpárková, Kristýna. "3D tisk kompozitních materiálů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417454.

Повний текст джерела
Анотація:
The submitted thesis deals with a study of composite materials and processing them using 3D printing technology. The experimental part of this thesis is focused on the production of test samples with the use of additive technology Fused Deposition Modeling and Continuous Filament Fabrication. The composite samples made of common onyx material, individually reinforced with continuous carbon fiber filaments, kevlar, or fiberglass, were made with Marforged Mark Two 3D printer. The other samples made of PETG PM and PETG CFjet materials were made with Original Prusa i3 MK2S 3D printer. For technological evaluation, a tensile test was performed on samples, following the norm EN ISO 527-2:2012. Based on results obtained from tensile testing, the properties of materials strength and usability are verified and compared. In this work, the production process is proposed, and technical-economic evaluation is made. In conclusion, achieved results and overall benefits of this work are summarised.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Tvrdoň, Radek. "3D tisk kovů robotem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443161.

Повний текст джерела
Анотація:
The diploma thesis presents an overview of additive production technologies and a summary of technologies used for 3D metal printing using a robot. All of them are generally described and at the same time assigned to their specific commercial use, or the academic research that deals with them. The work examines the suitability of the material EN ISO 14341-A: G 3Si1 for 3D printing, for which a modification of the Col Metal Transfer technology, Cycle Step is used. The experimental printout of the sample is evaluated on the basis of surface and mechanical tests. Capillary test, examination of microstructure a macrostructure, tensile test and microhardness test. All of them were satisfactory and the suitability of the welding wire for 3D printing was confirmed by the given technology.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Šremrová, Vendula. "3D tisk optomechanických zařízení." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444972.

Повний текст джерела
Анотація:
Optomechanical components are widely used in many optical experiments. This diploma thesis deals with design and manufacturing optomechanical components using 3D print technology. These are cheaper alternatives of commercial devices. In addition to 3D printed parts, minimum number of other components are used to assemble functional devices. Using simple experimental setups, the manufactured components are evaluated and compared with commercially available ones. The results show that they can be used in applications where high accuracy is not required. The second part is devoted to the design and manufacturing of a polarimeter as a mechanism combining electrical and mechanical components with 3D printed parts. The polarimeter is used to measure some properties of polarized light.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Ištvánek, Jan. "Dispenzní tisk tlustovrstvých past." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218811.

Повний текст джерела
Анотація:
This work deals with the problem of the thick-film pastes and their printing. In the main chapter of this work, the realization of a workplace for thick-film pastes' printing is described. The construction of the realized plotter and the controlling electronics of the plotter is depicted in detail.In the following chapter, the console, through which the plotter is controlled via PC, and the CAD program, which serves for projecting of the motives printed, are described.In the final chapter of this work, the measured profiles of the paste printed for various settings of printing parameters and the photographs of the motives printed are stated.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Třešňáková, Andrea. "Materiálový tisk UV dozimetrů." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2017. http://www.nusl.cz/ntk/nusl-316153.

Повний текст джерела
Анотація:
The subject of this theses is a preparation of chemical UV dosimeters working on diverse principles and their printing. Three UV dosimeters were prepared. The first one is based on a photocalalytic reaction of titanium dioxide with redox dyes. Two other dosimeters are based on a reaction of a photolabile substance able to produce an intermediate reacting with a dye. Prepared dosimeter compositions were coated using a material roll-to-roll printing machine on a corona-treated PET foil. Prepared dosimeter compositions were calibrated for desired exposition to UV radiation doses. Validity of a reciprocity law was verified.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Röhnelt, Tobias. "Tim Kröger : Leben und Werk /." Frankfurt am Main [u.a.] : Lang, Peter Frankfurt, 2009. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=017113901&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
11

Röhnelt, Tobias. "Tim Kröger Leben und Werk." Frankfurt, M. Berlin Bern Bruxelles New York, NY Oxford Wien Lang, 2007. http://d-nb.info/99183836X/04.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
12

Schomerus, Aaron Michael. "Effectiveness of various techniques in reducing noise generated in measuring torsional vibration." [College Station, Tex. : Texas A&M University, 2007. http://hdl.handle.net/1969.1/ETD-TAMU-1574.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
13

Dallmeyer, Jörg [Verfasser], Ingo J. [Akademischer Betreuer] Timm, and Lars [Akademischer Betreuer] Hedrich. "Akteursorientierte multimodale Straßenverkehrssimulation / Jörg Dallmeyer. Gutachter: Ingo J. Timm ; Lars Hedrich. Betreuer: Ingo J. Timm." Frankfurt am Main : Univ.-Bibliothek Frankfurt am Main, 2013. http://d-nb.info/1043978143/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
14

Dragoslav, Pavić. "Potamološke karakteristike Tise u Srbiji i predispozicije za razvoj nautičkog turizma." Phd thesis, Univerzitet u Novom Sadu, Prirodno-matematički fakultet u Novom Sadu, 2006. https://www.cris.uns.ac.rs/record.jsf?recordId=16721&source=NDLTD&language=en.

Повний текст джерела
Анотація:
Tisa nastaje spajanjem Crne i Bele Tise kod Rahova u Ukrajini. Osim kroz pomenutu zemlju ova reka teče još kroz Rumuniju, Mađarsku i Srbiju, dok na kraćoj deonici dodiruje teritoriju Slovačke. Površina sliva Tise, koji je najvećim delom ravničarskog karaktera, iznosi 157.220 km2, od čega se u granicama Srbije nalazi 9.460 km2 slivnog područja. Veštačkim prosecanjem brojnih meandara tok Tise je skraćen za 453 km, tako da je današnja dužina reke 966 km. Kroz Srbiju Tisa teče izrazito meandarskim koritom dužine od 164 km.  Tisa predstavlja najveću pritoku Dunava u koji se uliva naspram Starog Slankamena. Izgradnjom brana na Tisi i obrazovanjem hidroakumulacija na uzvodnim sektorima u velikoj meri su poboljšani uslovi plovidbe na ovoj reci.  Upravo dobri plovidbeni uslovi predstavljaju glavnu predizpoziciju za razvoj nautičkog turizma. Prihvatni objekti nautičkog turizma su: nautička sidrišta, privezišta, turistička pristaništa, marine i nautičko-turistički centri. Glave predispozicije za razvoj nautičkog turizma u srpskom Potisju u prvom redu predstavljaju dobri plovidbeni uslovi na Tisi, tranzitna uloga ove deonice toka, kao i brojna prirodna i kulturna dobra u bližem i daljem priobalju reke. Ono što nedostaje i zbog čega je nautički turizam u srpskom Potisju na veoma niskom nivou, jesu dobro opremljeni prihvatni objekti, uopšte viši nivo usluga i dobro osmišljena marketinška aktivnost.
The Tisa comes into being by merging of the Black and White Tisa near Rahovo in Ukraine. Apart from Ukraine, the river flows through Romania, Hungary and Serbia, being tangent to the territory of Slovakia in the shorter part of its flow. The river basin, mainly situated in the low land, covers the area of 157,220 km2, out of which 9,460 km2 is on the territory of Serbia. Artificially made meanders shortened the flow of the Tisa for 453 km, which contributed to its present length of 966 km. The Tisa flows in a 164 km long meandrous riverbed through Serbia. Generally, the direction of the flow in this sector is meridian, thus making the river a natural border between Banat in the east and Backa in the west. The Tisa is the largest of the Danube tributaries, joining the Danube at its 1,214.5th river kilometer near Stari Slankamen. Due to the wide scope of passive and active measures, undertaken with the aim to organize the water of the Tisa, the river system was significantly changed in comparison to the natural one. Apart from the artificial shortening of the flow and building dykes on riverbanks, the most significant changes in the river system were mainly influenced by dams built near Tiszalök, Kisköre, and Novi Becej, due to which three water steps were formed in the middle and lower river’s flow. With the exception of the spring period of high water level, in other periods of the year the Tisa river regime is artificially directed, which is noticeable in the parts upstream of dams. However, due to the prevailing natural conditions, first of all climate conditions, it could be established that in lower part of the Tisa, the highest water levels and flow rates occur in spring reaching their maximum values in April and the lowest occur in autumn, reaching minimum values in October. Navigation conditions on the river are improved to large extent by building dams on the Tisa and making hydro accumulations in upstream sectors. On Serbian part of the river flow, the conditions are particularly good upstream the dam built near Novi Becej at 63th river kilometer. It is exactly the navigation conditions which represent the main predisposition for nautical tourism development. However, this rather attractive form of tourism in the world lately is not only connected with navigation and navigation course, but also with different activities on the banks and wider riversides, such as sports and recreational, cultural, entertaining, etc. For the needs of nautical tourism, various types of boats are used and various objects are built on river banks or on the river. The objects are used for accepting, supplying, protection, maintenance and repairing the boats used in tourism and also for providing navigators with different services. Accepting objects in nautical tourism are: nautical anchorages, moorings, tourist quays, marines and nautical tourism centers. Firstly, the main predispositions for nautical tourism development in Serbian Potisje are good navigation conditions on the Tisa, transit feature of this part of the flow, as well as numerous natural and cultural assets closer to or farther from riversides. The missing links, which leave nautical tourism in Serbian Potisje on very low level, are well equipped private accommodation, generally higher level of services and well planned marketing activities.
Стилі APA, Harvard, Vancouver, ISO та ін.
15

Jülicher, Tim [Verfasser]. "Medizininformationsrecht / Tim Jülicher." Baden-Baden : Nomos Verlagsgesellschaft mbH & Co. KG, 2018. http://d-nb.info/1160310475/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
16

Peters, Friedrich Ernst. "Timm Kröger : der Dichter unserer Heimat." Universität Potsdam, 2012. http://opus.kobv.de/ubp/volltexte/2012/5798/.

Повний текст джерела
Анотація:
Der norddeutsche Schriftsteller Timm Kröger ist in Haale (Kreis Rendsburg-Eckernförde) geboren, einem Dorf, das in nächster Nähe von Luhnstedt, dem Heimatdorf von F.E. Peters, liegt. Peters und Kröger sind sich nie persönlich begegnet, hatten aber gemeinsame Bekannte. „Timm Kröger – der Dichter unserer Heimat“ stammt aus dem Nachlass von F.E. Peters, der ein Bewunderer der Kunst Timm Krögers war und den „besonderen lyrischen Schimmer“ seiner Erzählkunst geliebt hat. Die Rede ist anlässlich des 110. Geburtstages von Timm Kröger entstanden. Peters nimmt das Jubiläum zum Anlass, anhand von Zitaten aus Krögers Vorwort zu einer Gesamtausgabe seiner Werke die Gattung Heimatdichtung kritisch zu beleuchten und zu unterscheiden zwischen einer ideologisch gefärbten schablonenhaften Heimatdichtung und einer Dichtung, welche die Landschaften der Heimat in den Mittelpunkt stellt, das Provinzielle jedoch überwindet: „Es sei zugegeben, dass von sogenannten Heimatdichtern viel plattes Zeug geliefert wird. Darum spreche ich heute von dem Dichter unserer Heimat, nicht von dem Heimatdichter Timm Kröger.“
Стилі APA, Harvard, Vancouver, ISO та ін.
17

Janiš, Adam. "Mechanické vlastnosti materiálů pro 3D tisk." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442479.

Повний текст джерела
Анотація:
This thesis focuses on the description of 3D printing technologies using the FDM method, which uses deposition of molten thermoplastics and their subsequent cooling and solidification layer by layer. This unique structure then shows a strong anisotropy of mechanical properties and, as a result, their testing and print settings are very important. Tensile testing of plastic materials, including indicators of mechanical properties, are described in this thesis according to ČSN EN ISO standard. The practical part presents the concept of a device capable of performing these tests. The block diagram indicates the functional elements and the connections among them. Tensile strength test is described together with results processing. Necessary product documentation is also included.
Стилі APA, Harvard, Vancouver, ISO та ін.
18

Hertlein, Johann Christopher. "Messung kritischer Casimir-Kräfte mit TIRM." [S.l. : s.n.], 2008. http://nbn-resolving.de/urn:nbn:de:bsz:93-opus-37124.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
19

Ward, James Mace. "No saint : Jozef Tiso, 1887-1947 /." May be available electronically:, 2008. http://proquest.umi.com/login?COPT=REJTPTU1MTUmSU5UPTAmVkVSPTI=&clientId=12498.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
20

Műller, Jakub. "Kompozitní tisk pro 3D FDM tiskárnu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382278.

Повний текст джерела
Анотація:
This diploma thesis deals with the study of 3D printing based on the FDM method. This method focuses on the possibility of using two extruders it means that the composite parts can be printed. This diploma thesis describes the available variants of composite printing currently on the market. Based on the gained knowledge and the availability of 3D printers and software, individual variants of composite parts were printed. A tensile test was performed on these samples to determine the strength characteristics. Additionally, compatibility and adhesion of two selected materials were tested. Based on the testing is made an evaluation of the achieved results, effectiveness and feasibility.
Стилі APA, Harvard, Vancouver, ISO та ін.
21

Timm, Wolfram [Verfasser]. "Markovianity of trabecular networks / Wolfram Timm." Kiel : Universitätsbibliothek Kiel, 2009. http://d-nb.info/1019866217/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
22

Timm, Wolfram [Verfasser]. "Markovianity of Trabecular Networks / Wolfram Timm." Kiel : Universitätsbibliothek Kiel, 2006. http://d-nb.info/1080317015/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
23

Knobová, Klára. "Materiálový tisk na R2R tiskovém stroji." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2015. http://www.nusl.cz/ntk/nusl-217099.

Повний текст джерела
Анотація:
This diploma thesis deals with material printing using roll to roll material printer. Several kinds of printing inks were prepared and their parameters, like viscosity and homogeneity were optimized. Corona treated PET foil was used as the flexible substrate. Thin layers of function material were prepared by coating by using the smooth cylinder and slot die method. Layers homogeneity was characterized by optical density. Layer thickness was measured by profilometer.
Стилі APA, Harvard, Vancouver, ISO та ін.
24

Breitkreiz, Maxim [Verfasser], Carsten [Akademischer Betreuer] Timm, and Jörg [Akademischer Betreuer] Schmalian. "Transport Theory for Metals with Excitonic Instabilities / Maxim Breitkreiz. Betreuer: Carsten Timm. Gutachter: Carsten Timm ; Jörg Schmalian." Dresden : Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2015. http://d-nb.info/1080645284/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
25

Hagedorn, Heiko [Verfasser], Jürgen [Akademischer Betreuer] Timm, and Werner [Akademischer Betreuer] Brannath. "Trennung von mehrdimensionalen Mischverteilungen bei heterogenen Grundgesamtheiten / Heiko Hagedorn. Gutachter: Jürgen Timm ; Werner Brannath. Betreuer: Jürgen Timm." Bremen : Staats- und Universitätsbibliothek Bremen, 2011. http://d-nb.info/107189840X/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
26

Breitkreiz, Maxim [Verfasser], Carsten Akademischer Betreuer] Timm, and Jörg [Akademischer Betreuer] [Schmalian. "Transport Theory for Metals with Excitonic Instabilities / Maxim Breitkreiz. Betreuer: Carsten Timm. Gutachter: Carsten Timm ; Jörg Schmalian." Dresden : Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2015. http://d-nb.info/1080645284/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
27

Yobregat, Elsa. "Les isotopes du strontium et du baryum dans le Système Solaire précoce." Thesis, Lyon, 2017. http://www.theses.fr/2017LYSEN002/document.

Повний текст джерела
Анотація:
Des anomalies nucléosynthétiques ont été observées dans des météorites pour plusieurs éléments. L’ampleur de ces anomalies ainsi que leur répartition entre les objets du système solaire renseigne sur le degré d’hétérogénéité de la nébuleuse solaire. L’étude des phases porteuses de ces anomalies procure des informations sur les processus à l’origine de cette hétérogénéité. Les datations par radiochronomètres de courte période reposent sur la répartition hétérogène des éléments père et fils. L’utilisation de ces outils nécessite donc l’étude parallèle des variations nucléosynthétiques de ces éléments
Nucleosynthetic anomalies have been observed in meteorites for many elements. The magnitude and repartition of these anomalies provide information about the degree of heterogeneity of the solar nebula. The study of the nucleosynthetic anomalies carriers could also give insight into the processes responsible for this heterogeneity. The presence or absence of small variations in nucleosynthetic processes is a key for the use of the short-lived radiochronometers. Small variations in the repartition of the parent or daughter isotope can lead to misinterpretations of relative ages
Стилі APA, Harvard, Vancouver, ISO та ін.
28

Wengrzik, Joanna [Verfasser], Jürgen [Akademischer Betreuer] Timm, and Werner [Akademischer Betreuer] Brannath. "Parameter Estimation for Mixture Models Given Grouped Data / Joanna Wengrzik. Gutachter: Jürgen Timm ; Werner Brannath. Betreuer: Jürgen Timm." Bremen : Staats- und Universitätsbibliothek Bremen, 2012. http://d-nb.info/1071993518/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
29

Schulz, Constanze [Verfasser], Jürgen [Akademischer Betreuer] [Gutachter] Timm, and Alexandra [Gutachter] Graf. "Patient-oriented Randomisation - a new clinical trial design / Constanze Schulz ; Gutachter: Jürgen Timm, Alexandra Graf ; Betreuer: Jürgen Timm." Bremen : Staats- und Universitätsbibliothek Bremen, 2016. http://d-nb.info/1115301012/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
30

Borgschulze, Annika [Verfasser], Tim [Gutachter] Lögters та Timm [Gutachter] Filler. "Untersuchungen zum Einfluss von IL-1β und TGF-β1 auf die Differenzierung von Fibroblasten und zur Bedeutung von blauem Licht beim Morbus Dupuytren / Annika Borgschulze ; Gutachter: Tim Lögters, Timm Filler". Düsseldorf : Universitäts- und Landesbibliothek der Heinrich-Heine-Universität Düsseldorf, 2016. http://d-nb.info/111374801X/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
31

Weum, Sofia. "Tim Burton och fantasifabriken." Thesis, Växjö University, School of Humanities, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:vxu:diva-2175.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
32

Linne, Tim-Werner [Verfasser]. "Dieselgate / Tim-Werner Linne." Bielefeld : Universitätsbibliothek Bielefeld, 2019. http://d-nb.info/1200097629/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
33

Morais, Tiago Gualberto. "Lembrança de Nhô Tim." Universidade de São Paulo, 2018. http://www.teses.usp.br/teses/disponiveis/27/27159/tde-05122018-094222/.

Повний текст джерела
Анотація:
Este trabalho investiga as relações entre a exploração da terra realizada pela prática da mineração e estratégias de produção de memória a partir da proposta de um diálogo artístico na comunidade do bairro Resplendor, na cidade de Igarapé-MG. Esta região de recente urbanização destaca-se, especialmente, pelas transformações da paisagem em decorrência da proximidade com grandes empreendimentos: o centro de arte contemporânea Inhotim; a economia mineradora; a instalação de presídios (Bicas I e II) e a construção de conjuntos habitacionais populares. Partindo de uma série de intervenções nesta localidade realizada em 11 de setembro de 2016, a qual possui no objeto Lembrança de Nhô Tim seu eixo central, propus a elaboração desta publicação impressa de caráter ficcional reunindo registros audiovisuais, documentos, imagens de trabalhos artísticos e depoimentos desta experiência e seus desdobramentos ao longo deste curso de mestrado. Aspira-se ampliar as compreensões artísticas contemporâneas envoltas em práticas capazes de aglutinar aspectos envolvidos com o sistema da arte, o convívio comunitário e com a invenção de memórias.
This work studies the connections between the exploitation of land carried out by the practice of mining and strategies of memory production made from the proposal of an artistic dialogue in the community of Resplendor, in the city of Igarapé- -MG. This region of recent urbanization stands out, especially, considering the transformations of the landscape due to the presence of large enterprises: the Center of Contemporary Art Inhotim; mining economy; installation of the prisons (Bicas I and II) and the establishment of popular housing. Starting from a series of interventions in this location, realized on September 11th 2016, which has the object Souvenir of Nhô Tim as it\'s central axis, I proposed the elaboration of this printed publication which has a fictional character and gathers audiovisual records, documentation, images of art works and testimonies of this experience and its unfolding during the course of this Masters degree program. The aim is to broaden the contemporary art comprehension wrapped in practices capable of agglutinating aspects involved in art systems, community living and with the invention of memories.
Стилі APA, Harvard, Vancouver, ISO та ін.
34

Masalitin, М. "Timothy Walter "Tim" Burton." Thesis, Sumy State University, 2015. http://essuir.sumdu.edu.ua/handle/123456789/40409.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
35

Timm, Thorsten [Verfasser]. "Beschuss von flüssigkeitsgefüllten Behältern / von Thorsten Timm." Karlsruhe : Inst. für Massivbau und Baustofftechnologie, 2003. http://d-nb.info/1005508674/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
36

Wilke, Timm [Verfasser]. "Energieumsetzung und Gefügebeeinflussung beim Schleifhärten / Timm Wilke." Aachen : Shaker, 2009. http://d-nb.info/1161311351/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
37

Petřík, Radek. "Informační systém pro evidenci a tisk zásilek." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2008. http://www.nusl.cz/ntk/nusl-235436.

Повний текст джерела
Анотація:
The field of this work was to create a web application easing shipper's and carrier's work with consignments. The purpouse of the application is evidence of packages combined with label printing. A prewiew of present-day web application development techniques is provided first. Recent package delivery systems are discussed then. The application specification is the next topic. Implementation process using C# ASP .NET and the results of this work is analyzed in the last chapters.
Стилі APA, Harvard, Vancouver, ISO та ін.
38

Zelko, Lukáš. "Píst zážehového motoru pro 3-D tisk." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400468.

Повний текст джерела
Анотація:
The goal of the thesis was to design a piston manufactured by conventional method and subsequently adjusted one for additive manufacturing. Beside the designs, thermo-structural model was created for both pistons, considering maximal loading of the engine. Analysis evaluation showed the possibility of further application of the new technology in comparison to current one, within automotive industry.
Стилі APA, Harvard, Vancouver, ISO та ін.
39

Čáslavský, František. "Zkoušky vybraných vlastností materiálů pro 3D tisk." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400683.

Повний текст джерела
Анотація:
This thesis deals with 3D printing, materials used for 3D printing, testing of the materials and learning their real parameters. Goal of the thesis is comparing selected materials, executing series of mechanical test and selecting suitable material for printing high-quality plastic parts for use in automobiles, especially for reproduction of parts that are no longer made for oldtimers and for use in motorsport.
Стилі APA, Harvard, Vancouver, ISO та ін.
40

Martiniaková, Ivana. "Formulace inkoustů pro materiálový tisk chemických značek." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2019. http://www.nusl.cz/ntk/nusl-401918.

Повний текст джерела
Анотація:
This diploma theses is about the study of the effect of individual components of printing compositions intended for material printing of identificaton codes, read by X-ray fluorescence. Two printing technologies were used – screen printing and pad printing. The composition of the print compositions has been optimized in term of visual recognition, print repeatability, a dry matter content providing an X-ray fluorescence signal, as well as optimization of the material print process leading to the creation of invisible identification tags for archive documents.
Стилі APA, Harvard, Vancouver, ISO та ін.
41

Hospodárová, Mária. "Hospodárstvo slovenského štátu a Dr. Jozef Tiso." Master's thesis, Vysoká škola ekonomická v Praze, 2007. http://www.nusl.cz/ntk/nusl-843.

Повний текст джерела
Анотація:
Práca sa zaoberá problematikou slovenského štátu, slovenskými autonómi snahami od 19. storočia až po prvú ČSR, priebehom veľkej hospodárskej krízy na Slovensku. Ďalej popisuje dôležité medzníky vo vývoji v slovenskej politiky medzi rokmi 1938-1939, od vyhlásenia autonómie, Viedenkej arbitráže, vzniku samostatného slovenského štátu až po rokovania v Salzburgu. Zaoberá sa tieže slovensko-nemeckou hospodárskou a finančnou spoluprácou, slovenským vojnovým hospodárstvom, slovenským peňažníctvom a rieši otázku možnosti vlasnej slovenskej politiky nezávisle na Nemecku a úlohu Dr. J. Tisu.
Стилі APA, Harvard, Vancouver, ISO та ін.
42

Timm, Lars [Verfasser]. "Koordinative Gangstörung bei Migräne-Patienten / Lars Timm." Kiel : Universitätsbibliothek Kiel, 2011. http://d-nb.info/1020244755/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
43

Šlemr, Jakub. "Vliv okolních dřevin na dendrometrické charakteristiky tisu." Master's thesis, Česká zemědělská univerzita v Praze, 2016. http://www.nusl.cz/ntk/nusl-256940.

Повний текст джерела
Анотація:
In December 2015 the next part of the research population yew (Taxus baccata) took place in NPR Chlumská stráň. The specimens exceeding 4 meters at height at which the sex is possible to determine were selected from the total population. And from this group 50 individuals were randomly selected and the following characteristics were measured height, breast-height diameter, girth, height deployment of the first green branches, distances ends of the branches from the trunk, a distance of 5 nearest trees, their height and azimuth, also was intended sexes and crown shape. Volume and height of the crown were calculated. The aim is to determine how the surrounding tree species affect mensurational characteristics of the yew not only basic characteristics such as thickness at breast height and tree height, crown but also the crown characteristics and health status. The average diameter of the examined yews is 41,53 cm and a height of 13,66 m. The yew crowns were investigated in detail. The most important and interesting data are the yew crown projection and distances of competing species. The average crown projection yew is 79,25 square meters, the average height of the crown is 12,26 m, the surface of the crown is 2531,46 square meters, the average crown width is 10,36 m and the average volume of 429,80 cubic meters. 95 % of all surveyed yew has asymmetric crown, making it likely the high impact of competitive species. The most abundand species of competitors is hornbeam (Carpinus betulus) with a total of 60 individuals, an average height of 13,6 meters and an average distance of 5,79 meters, followed by lime(Tilia cordata) and manna ash (Fraxinus ornus). Crown yew are deflected to the north, northwest and west direction because of terrain conditions and competing trees. Research in the future should be also focused to the marginal tree species and for yew it should be very appropriate to establish permanent sample plots and to use collected information for return of yew to our forests.
Стилі APA, Harvard, Vancouver, ISO та ін.
44

Hrdlička, Martin. "Vliv teploty vzduchu na FDM 3D tisk." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318133.

Повний текст джерела
Анотація:
The thesis deals with 3D printing by the FDM and ambient temperature on print quality. The thesis describes the principle of printing by the FDM method and the occurrence of errors caused by the influence of ambient temperature. The aim of the thesis is to design a heated chamber for RepRap Prusa i3 printer, its construction and subsequent testing of ambient temperature influence on print quality. To test the occurrence of the described errors, specific tests and materials are selected in the work. The result of this work is the recommended ambient temperature in the heated chamber for improved FDM printing.
Стилі APA, Harvard, Vancouver, ISO та ін.
45

Pavlišta, Marek. "Analýza internetové web-to-print aplikace malé tiskárny včetně návrhu vylepšení jejich funkcí." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2010. http://www.nusl.cz/ntk/nusl-222772.

Повний текст джерела
Анотація:
Work analysis we-to-print aplications run by company REP Tisk spol. s r. o. It contains theoretical background, analysis od the current version of the application and suggestions for new version. The emphasis was primarily on pricing variability. Key was also possibility to run the application on multiple web sites simultaneously.
Стилі APA, Harvard, Vancouver, ISO та ін.
46

Mills, David. "The sense of self and place in Tim Winton's Cloudstreet /." Title page and introduction only, 1994. http://web4.library.adelaide.edu.au/theses/09AR/09arm6568.pdf.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
47

Graf, Natascha. "Düstere Bilder, skurrile Gestalten und märchenhafte Welten drei Filme Tim Burtons im Vergleich." Marburg Tectum-Verl, 2009. http://d-nb.info/997056363/04.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
48

Zebrowski, Sylvia [Verfasser], Jürgen [Akademischer Betreuer] Timm, and Werner [Akademischer Betreuer] Brannath. "Biometrische Analyse von Imputationsmethoden für Fehlwerte in Gauß-Mischverteilungen / Sylvia Zebrowski. Gutachter: Jürgen Timm ; Werner Brannath. Betreuer: Jürgen Timm." Bremen : Staats- und Universitätsbibliothek Bremen, 2011. http://d-nb.info/107189837X/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
49

Zihlmann, Markus Guido 1977. "Tim Krohns Romane Quatemberkinder und Vrenelis Gartli als mogliche Uberwindung der "Krise des Romans"." Thesis, University of Oregon, 2009. http://hdl.handle.net/1794/9885.

Повний текст джерела
Анотація:
vi, 73 p. A print copy of this thesis is available through the UO Libraries. Search the library catalog for the location and call number.
At the beginning of the 20th century, several critics suggested that the genre of the novel was in a state of crisis. A vigorous discussion about whether the genre of the novel as a whole had to be done away with erupted and produced contradicting frameworks. A textual analysis of two recent books by Swiss writer Tim Krohn, Quatemberkinder (1998) and Vrenelis Gartli (2004), reveals that the time of great epics in the form of the novel has not yet come to an end. Krohn's novels portray a new approach to counter what Lukacs called "transcendental homelessness." By combining oral Swiss legends with historical facts and magic realism Krohn is able to achieve a new wholeness the modem novel lacked. His novels portray a possible solution for overcoming the "crisis of the novel."
Committee in Charge: Prof. Susan C. Anderson, Chair; Prof. Kenneth Scott Calhoon; Prof. Martin Klebes
Стилі APA, Harvard, Vancouver, ISO та ін.
50

Pelt, Eric. "Datation des processus d'altération par l'étude des déséquilibres radioactifs 238U-234U-230TH-226Ra dans les profils d'altération." Université Louis Pasteur (Strasbourg) (1971-2008), 2007. http://www.theses.fr/2007STR1GE07.

Повний текст джерела
Анотація:
Ce travail est focalisé sur la datation des profils d’altération par l’étude des déséquilibres radioactifs de la série de l’uranium-238. Il prolonge les efforts menés à Strasbourg pour le développement de méthodes robustes de caractérisation et de datation des processus d’altération et des surfaces continentales. C’est en effet un paramètre clé pour mieux comprendre les processus de transfert dans les couches de surface. D’un point de vue analytique, le travail a permis une amélioration notable de l’analyse des concentrations de radium par spectrométrie de masse à thermo-ionisation et des rapports isotopiques du thorium supérieurs au million. Les méthodes de dilution isotopique ont été améliorées par la mise en place d’une procédure permettant l’analyse des déséquilibres radioactifs U-Th-Ra dans les faibles quantités d’échantillon. Par ailleurs, la datation des processus d’altération a nécessité le développement d’un programme de simulation numérique par méthode inverse des déséquilibres U-Th dans les sols. Trois sites d’application ont été retenus pour ce travail : un profil latéritique en Amazonie centrale, une couronne d’altération développée sur un fragment de basalte au Costa Rica et une succession de sols développés sur des coulées basaltiques au Mont cameroun. Les résultats obtenus donnent des vitesses d’altération de l’ordre de 10m/Ma en Amazonie centrale et des vitesses plus faibles de l’ordre de 0,5m/Ma au Costa Rica. Cette différence est attribuée aux propriétés hydrodynamiques très contrastées entre le profil latéritique d’Amazonie et la couronne développée sur basalte au Costa Rica. Ce résultat suggère que ce sont ces propriétés hydrodynamiques qui contrôlent les vitesses d’altération dans les profils. L’étude de cette couronne d’altération montre également le potentiel de ces matériaux comme enregistreurs des conditions paléogéographique d’altération. Par ailleurs, l’étude de l’impact des dépôts secs sur les sols au Mont Cameroun suggère que ces dépôts peuvent influencer les déséquilibres radioactifs mesurés dans ces sols basaltiques mais montre également que cette contribution reste faible et peut donc être négligée dans la majorité des cas
This work focuses on the study of U-series disequilibria to constrain the timescale of formation and evolution of weathering profiles. Following previous studies, this work carries on with the development of geochemical tools to precise processes occurring within weathering profiles and to constrain their timescales. This information is a key parameter to understand geochemical transfer processes within surface layers. Analytical work enhances the measurement of radium concentrations and the measurement of thorium isotopic ratios up to one million by thermo-ionization mass spectrometry. New isotopic dilution techniques were set up to measure U-Th-Ra disequilibria within small amounts of samples. To date weathering profiles, a computing code was developed to inverse U-series data in soils. We studied three sites under tropical climate during this work: a lateritic profile in central Amazonia, a weathering rind developed on a basaltic clast in Costa Rica and a succession of soils developed on recent lava flows in Mount Cameroon. The results give weathering rates about 10m/Ma in Amazonia and lower rates, about 0,5m/Ma, in Costa Rica. This difference is related to different hydrodynamic characteristics between lateritic profile and weathering rind. This result suggests that hydrodynamic characteristics play a key role in controlling weathering rates. The study of this weathering rind suggests that this kind of materials can be used to record past weathering process characteristics. The study of the impact of dried deposits in Mount Cameroon suggests that these dust inputs can influence U-series disequilibria in basaltic soils. Nevertheless, that influence is quite limited and can be neglected in most cases
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити добірки на тему "TISM" для інших типів джерел:
Статті в журналах Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії