Дисертації з теми "Time in music Data processing"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Time in music Data processing".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Chang, Kuo-Lung. "A Real-Time Merging-Buffering Technique for MIDI Messages." Thesis, University of North Texas, 1991. https://digital.library.unt.edu/ark:/67531/metadc500471/.
Повний текст джерелаShafer, Seth. "Recent Approaches to Real-Time Notation." Thesis, University of North Texas, 2017. https://digital.library.unt.edu/ark:/67531/metadc984210/.
Повний текст джерелаSerrà, Julià Joan. "Identification of versions of the same musical composition by processing audio descriptions." Doctoral thesis, Universitat Pompeu Fabra, 2011. http://hdl.handle.net/10803/22674.
Повний текст джерелаAquest treball es centra en la identificació automàtica de versions musicals (interpretacions alternatives d'una mateixa composició: 'covers', directes, remixos, etc.). En concret, proposem dos tiupus d'estratègies: la lliure de model i la basada en models. També introduïm tècniques de post-processat per tal de millorar la identificació de versions. Per fer tot això emprem conceptes relacionats amb l'anàlisi no linial de senyals, xarxes complexes i models de sèries temporals. En general, el nostre treball porta la identificació automàtica de versions a un estadi sense precedents on s'obtenen bons resultats i, al mateix temps, explora noves direccions de futur. Malgrat que els passos que seguim estan guiats per la natura dels senyals involucrats (enregistraments musicals) i les característiques de la tasca que volem solucionar (identificació de versions), creiem que la nostra metodologia es pot transferir fàcilment a altres àmbits i contextos.
Ostroumov, Ivan Victorovich. "Real time sensors data processing." Thesis, Polit. Challenges of science today: XIV International Scientific and Practical Conference of Young Researchers and Students, April 2–3, 2014 : theses. – К., 2014. – 35p, 2014. http://er.nau.edu.ua/handle/NAU/26582.
Повний текст джерелаMacias, Filiberto. "Real Time Telemetry Data Processing and Data Display." International Foundation for Telemetering, 1996. http://hdl.handle.net/10150/611405.
Повний текст джерелаThe Telemetry Data Center (TDC) at White Sands Missile Range (WSMR) is now beginning to modernize its existing telemetry data processing system. Modern networking and interactive graphical displays are now being introduced. This infusion of modern technology will allow the TDC to provide our customers with enhanced data processing and display capability. The intent of this project is to outline this undertaking.
White, Allan P., and Richard K. Dean. "Real-Time Test Data Processing System." International Foundation for Telemetering, 1989. http://hdl.handle.net/10150/614650.
Повний текст джерелаThe U.S. Army Aviation Development Test Activity at Fort Rucker, Alabama needed a real-time test data collection and processing capability for helicopter flight testing. The system had to be capable of collecting and processing both FM and PCM data streams from analog tape and/or a telemetry receiver. The hardware and software was to be off the shelf whenever possible. The integration was to result in a stand alone telemetry collection and processing system.
Şentürk, Sertan. "Computational analysis of audio recordings and music scores for the description and discovery of Ottoman-Turkish Makam music." Doctoral thesis, Universitat Pompeu Fabra, 2017. http://hdl.handle.net/10803/402102.
Повний текст джерелаEsta tesis aborda varias limitaciones de las metodologías más avanzadas en el campo de recuperación de información musical (MIR por sus siglas en inglés). En particular, propone varios métodos computacionales para el análisis y la descripción automáticas de partituras y grabaciones de audio de música de makam turco-otomana (MMTO). Las principales contribuciones de la tesis son el corpus de música que ha sido creado para el desarrollo de la investigación y la metodología para alineamiento de audio y partitura desarrollada para el análisis del corpus. Además, se presentan varias metodologías nuevas para análisis computacional en el contexto de las tareas comunes de MIR que son relevantes para MMTO. Algunas de estas tareas son, por ejemplo, extracción de la melodía predominante, identificación de la tónica, estimación de tempo, reconocimiento de makam, análisis de afinación, análisis estructural y análisis de progresión melódica. Estas metodologías constituyen las partes de un sistema completo para la exploración de grandes corpus de MMTO llamado Dunya-makam. La tesis comienza presentando el corpus de música de makam turcootomana de CompMusic. El corpus incluye 2200 partituras, más de 6500 grabaciones de audio, y los metadatos correspondientes. Los datos han sido recopilados, anotados y revisados con la ayuda de expertos. Utilizando criterios como compleción, cobertura y calidad, validamos el corpus y mostramos su potencial para investigación. De hecho, nuestro corpus constituye el recurso de mayor tamaño y representatividad disponible para la investigación computacional de MMTO. Varios conjuntos de datos para experimentación han sido igualmente creados a partir del corpus, con el fin de desarrollar y evaluar las metodologías específicas propuestas para las diferentes tareas computacionales abordadas en la tesis. La parte dedicada al análisis de las partituras se centra en el análisis estructural a nivel de sección y de frase. Los márgenes de frase son identificados automáticamente usando uno de los métodos de segmentación existentes más avanzados. Los márgenes de sección son extraídos usando una heurística específica al formato de las partituras. A continuación, se emplea un método de nueva creación basado en análisis gráfico para establecer similitudes a través de estos elementos estructurales en cuanto a melodía y letra, así como para etiquetar relaciones semióticamente. La sección de análisis de audio de la tesis repasa el estado de la cuestión en cuanto a análisis de los aspectos melódicos en grabaciones de MMTO. Se proponen modificaciones de métodos existentes para extracción de melodía predominante para ajustarlas a MMTO. También se presentan mejoras de metodologías tanto para identificación de tónica basadas en distribución de alturas, como para reconocimiento de makam. La metodología para alineación de audio y partitura constituye el grueso de la tesis. Aborda los retos específicos de esta cultura según vienen determinados por las características musicales, las representaciones relacionadas con la teoría musical y la praxis oral de MMTO. Basada en varias técnicas tales como deformaciones dinámicas de tiempo subsecuentes, transformada de Hough y modelos de Markov de longitud variable, la metodología de alineamiento de audio y partitura está diseñada para tratar las diferencias estructurales entre partituras y grabaciones de audio. El método es robusto a la presencia de expresiones melódicas no anotadas, desviaciones de tiempo en las grabaciones, y diferencias de tónica y afinación. La metodología utiliza los resultados del análisis de partitura y audio para enlazar el audio y los datos simbólicos. Además, la metodología de alineación se usa para obtener una descripción informada por partitura de las grabaciones de audio. El análisis de audio informado por partitura no sólo simplifica los pasos para la extracción de características de audio que de otro modo requerirían sofisticados métodos de procesado de audio, sino que también mejora sustancialmente su rendimiento en comparación con los resultados obtenidos por los métodos más avanzados basados únicamente en datos de audio. Las metodologías analíticas presentadas en la tesis son aplicadas al corpus de música de makam turco-otomana de CompMusic e integradas en una aplicación web dedicada al descubrimiento culturalmente específico de música. Algunas de las metodologías ya han sido aplicadas a otras tradiciones musicales, como música indostaní, carnática y griega. Siguiendo las mejores prácticas de investigación en abierto, todos los datos creados, las herramientas de software y los resultados de análisis está disponibles públicamente. Las metodologías, las herramientas y el corpus en sí mismo ofrecen grandes oportunidades para investigaciones futuras en muchos campos tales como recuperación de información musical, musicología computacional y educación musical.
Aquesta tesi adreça diverses deficiències en l’estat actual de les metodologies d’extracció d’informació de música (Music Information Retrieval o MIR). En particular, la tesi proposa diverses estratègies per analitzar i descriure automàticament partitures musicals i enregistraments d’actuacions musicals de música Makam Turca Otomana (OTMM en les seves sigles en anglès). Les contribucions principals de la tesi són els corpus musicals que s’han creat en el context de la tesi per tal de dur a terme la recerca i la metodologia de alineament d’àudio amb la partitura que s’ha desenvolupat per tal d’analitzar els corpus. A més la tesi presenta diverses noves metodologies d’anàlisi computacional d’OTMM per a les tasques més habituals en MIR. Alguns exemples d’aquestes tasques són la extracció de la melodia principal, la identificació del to musical, l’estimació de tempo, el reconeixement de Makam, l’anàlisi de la afinació, l’anàlisi de la estructura musical i l’anàlisi de la progressió melòdica. Aquest seguit de metodologies formen part del sistema Dunya-makam per a la exploració de grans corpus musicals d’OTMM. En primer lloc, la tesi presenta el corpus CompMusic Ottoman- Turkish makam music. Aquest inclou 2200 partitures musicals, més de 6500 enregistraments d’àudio i metadata complementària. Les dades han sigut recopilades i anotades amb ajuda d’experts en aquest repertori musical. El corpus ha estat validat en termes de d’exhaustivitat, cobertura i qualitat i mostrem aquí el seu potencial per a la recerca. De fet, aquest corpus és el la font més gran i representativa de OTMM que pot ser utilitzada per recerca computacional. També s’han desenvolupat diversos subconjunts de dades per al desenvolupament i evaluació de les metodologies específiques proposades per a les diverses tasques computacionals que es presenten en aquest tesi. La secció de la tesi que tracta de l’anàlisi de partitures musicals se centra en l’anàlisi estructural a nivell de secció i de frase musical. Els límits temporals de les frases musicals s’identifiquen automàticament gràcies a un metodologia de segmentació d’última generació. Els límits de les seccions s’extreuen utilitzant un seguit de regles heurístiques determinades pel format de les partitures musicals. Posteriorment s’utilitza un nou mètode basat en anàlisi gràfic per establir semblances entre aquest elements estructurals en termes de melodia i text. També s’utilitza aquest mètode per etiquetar les relacions semiòtiques existents. La següent secció de la tesi tracta sobre anàlisi d’àudio i en particular revisa les tecnologies d’avantguardia d’anàlisi dels aspectes melòdics en OTMM. S’hi proposen adaptacions dels mètodes d’extracció de melodia existents que s’ajusten a OTMM. També s’hi presenten millores en metodologies de reconeixement de makam i en identificació de tònica basats en distribució de to. La metodologia d’alineament d’àudio amb partitura és el nucli de la tesi. Aquesta aborda els reptes culturalment específics imposats per les característiques musicals, les representacions de la teoria musical i la pràctica oral particulars de l’OTMM. Utilitzant diverses tècniques tal i com Dynamic Time Warping, Hough Transform o models de Markov de durada variable, la metodologia d’alineament esta dissenyada per enfrontar les diferències estructurals entre partitures musicals i enregistraments d’àudio. El mètode és robust inclús en presència d’expressions musicals no anotades en la partitura, desviacions de tempo ocorregudes en les actuacions musicals i diferències de tònica i afinació. La metodologia aprofita els resultats de l’anàlisi de la partitura i l’àudio per enllaçar la informació simbòlica amb l’àudio. A més, la tècnica d’alineament s’utilitza per obtenir descripcions de l’àudio fonamentades en la partitura. L’anàlisi de l’àudio fonamentat en la partitura no només simplifica les fases d’extracció de característiques d’àudio que requeririen de mètodes de processament d’àudio sofisticats, sinó que a més millora substancialment els resultats comparat amb altres mètodes d´ultima generació que només depenen de contingut d’àudio. Les metodologies d’anàlisi presentades s’han utilitzat per analitzar el corpus CompMusic Ottoman-Turkish makam music i s’han integrat en una aplicació web destinada al descobriment musical de tradicions culturals específiques. Algunes de les metodologies ja han sigut també aplicades a altres tradicions musicals com la Hindustani, la Carnàtica i la Grega. Seguint els preceptes de la investigació oberta totes les dades creades, eines computacionals i resultats dels anàlisis estan disponibles obertament. Tant les metodologies, les eines i el corpus en si mateix proporcionen àmplies oportunitats per recerques futures en diversos camps de recerca tal i com la musicologia computacional, la extracció d’informació musical i la educació musical. Traducció d’anglès a català per Oriol Romaní Picas.
Dowling, Jason, John Welling, Loral Aerosys, Kathy Nanzetta, Toby Bennett, and Jeff Shi. "ACCELERATING REAL-TIME SPACE DATA PACKET PROCESSING." International Foundation for Telemetering, 1995. http://hdl.handle.net/10150/608429.
Повний текст джерелаNASA’s use of high bandwidth packetized Consultative Committee for Space Data Systems (CCSDS) telemetry in future missions presents a great challenge to ground data system developers. These missions, including the Earth Observing System (EOS), call for high data rate interfaces and small packet sizes. Because each packet requires a similar amount of protocol processing, high data rates and small packet sizes dramatically increase the real-time workload on ground packet processing systems. NASA’s Goddard Space Flight Center has been developing packet processing subsystems for more than twelve years. Implementations of these subsystems have ranged from mini-computers to single-card VLSI multiprocessor subsystems. The latter subsystem, known as the VLSI Packet Processor, was first deployed in 1991 for use in support of the Solar Anomalous & Magnetospheric Particle Explorer (SAMPEX) mission. An upgraded version of this VMEBus card, first deployed for Space Station flight hardware verification, has demonstrated sustained throughput of up to 50 Megabits per second and 15,000 packets per second. Future space missions including EOS will require significantly higher data and packet rate performance. A new approach to packet processing is under development that will not only increase performance levels by at least a factor of six but also reduce subsystem replication costs by a factor of five. This paper will discuss the development of a next generation packet processing subsystem and the architectural changes necessary to achieve a thirty-fold improvement in the performance/price of real-time packet processing.
Fujinaga, Ichiro. "Optical music recognition using projections." Thesis, McGill University, 1988. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=61870.
Повний текст джерелаDahan, Michael. "RTDAP:REAL-TIME DATA ACQUISITION, PROCESSING AND DISPLAY SYSTEM." International Foundation for Telemetering, 1989. http://hdl.handle.net/10150/614848.
Повний текст джерелаThis paper describes a data acquisition, processing and display system which is suitable for various telemetry applications. The system can be connected either to a PCM encoder or to a telemetry decommutator through a built-in interface and can directly address any channel from the PCM stream for processing. Its compact size and simplicity allow it to be used in the flight line as a test console, in mobile stations as the main data processing system, or on-board test civil aircrafts for in-flight monitoring and data processing.
Swientek, Martin. "High-performance near-time processing of bulk data." Thesis, University of Plymouth, 2015. http://hdl.handle.net/10026.1/3461.
Повний текст джерелаSilva, Jesús, Palma Hugo Hernández, Núẽz William Niebles, David Ovallos-Gazabon, and Noel Varela. "Parallel Algorithm for Reduction of Data Processing Time in Big Data." Institute of Physics Publishing, 2020. http://hdl.handle.net/10757/652134.
Повний текст джерелаNordström, Jesper. "Real time digital signal processing using Matlab." Thesis, Uppsala universitet, Signaler och System, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-332075.
Повний текст джерелаLiu, Guangtian. "An event service architecture in distributed real-time systems /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.
Повний текст джерелаGuttman, Michael. "Sampled-data IIR filtering via time-mode signal processing." Thesis, McGill University, 2010. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=86770.
Повний текст джерелаDans ce mémoire, la conception de filtres de données-échantillonnées ayant une réponse impulsionnelle infinie basée sur le traitement de signal en mode temporel est présentée. Le traitement de signal dans le domaine temporel (TSDT), définie comme étant le traitement d'information analogique échantillonnée en utilisant des différences de temps comme variables, est devenu une des techniques émergentes de conception de circuits des plus populaires. Puisque le TSDT est toujours relativement récent, il y a encore beaucoup de développements requis pour étendre cette technologie comme un outil de traitement de signal général. Dans cette recherche, un ensemble de blocs d'assemblage capable de réaliser la plupart des opérations mathématiques dans le domaine temporel sera introduit. En arrangeant ces structures élémentaires, des systèmes en mode temporel d'ordre élevé, plus spécifiquement des filtres en mode temporel, seront réalisés. Trois filtres de deuxième ordre dans le domaine temporel (passe-bas, passe-bande et passe-haut) sont modélisés sur MATLAB et simulé sur Spectre afin de vérifier la méthodologie de conception. Finalement, un intégrateur amorti et un filtre passe-bas IIR de deuxième ordre en mode temporel sont implémentés avec des composantes discrètes.
Dreibelbis, Harold N., Dennis Kelsch, and Larry James. "REAL-TIME TELEMETRY DATA PROCESSING and LARGE SCALE PROCESSORS." International Foundation for Telemetering, 1991. http://hdl.handle.net/10150/612912.
Повний текст джерелаReal-time data processing of telemetry data has evolved from a highly centralized single large scale computer system to multiple mini-computers or super mini-computers tied together in a loosely coupled distributed network. Each mini-computer or super mini-computer essentially performing a single function in the real-time processing sequence of events. The reasons in the past for this evolution are many and varied. This paper will review some of the more significant factors in that evolution and will present some alternatives to a fully distributed mini-computer network that appear to offer significant real-time data processing advantages.
Feather, Bob, and Michael O’Brien. "OPEN ARCHITECTURE SYSTEM FOR REAL TIME TELEMETRY DATA PROCESSING." International Foundation for Telemetering, 1991. http://hdl.handle.net/10150/612934.
Повний текст джерелаThere have been many recent technological advances in small computers, graphics stations, and system networks. This has made it possible to build highly advanced distributed processing systems for telemetry data acquisition and processing. Presently there is a plethora of vendors marketing powerful new network workstation hardware and software products. Computer vendors are rapidly developing new products as new technology continues to emerge. It is becoming difficult to procure and install a new computer system before it has been made obsolete by a competitor or even the same vendor. If one purchases the best hardware and software products individually, the system can end up being composed of incompatible components from different vendors that do not operate as one integrated homogeneous system. If one uses only hardware and software from one vendor in order to simplify system integration, the system will be limited to only those products that the vendor chooses to develop. To truly take advantage of the rapidly advancing computer technology, today’s telemetry systems should be designed for an open systems environment. This paper defines an optimum open architecture system designed around industry wide standards for both hardware and software. This will allow for different vendor’s computers to operate in the same distributed networked system, and will allow software to be portable to the various computers and workstations in the system while maintaining the same user interface. The open architecture system allows for new products to be added as they become available to increase system performance and capability in a truly heterogeneous system environment.
Dahan, Michael. "RTDAP: Real-Time Data Acquisition, Processing and Display System." International Foundation for Telemetering, 1989. http://hdl.handle.net/10150/614629.
Повний текст джерелаThis paper describes a data acquisition, processing and display system which is suitable for various telemetry applications. The system can be connected either to a PCM encoder or to a telemetry decommutator through a built-in interface and can directly address any channel from the PCM stream for processing. Its compact size and simplicity allow it to be used in the flight line as a test console, in mobile stations as the main data processing system, or on-board test civil aircrafts for in-flight monitoring and data processing.
Crolene, Robert. "SYSTEMS AND METHODS TO REDUCE DATA PROCESSING TURNAROUND TIME." International Foundation for Telemetering, 1986. http://hdl.handle.net/10150/615397.
Повний текст джерелаWeapon system complexity and its data expression have become a central issue for the Range Directorate at the Pacific Missile Test Center (PMTC). Increasing data complexity and data product turnaround requirements have created a technological push-pull on traditional data processing methods. Several possible responses are discussed which include distributed front and back end processing relative to the large mainframes, and increasing use of artificial intelligence techniques in the data reduction area. These methods are going through progressive steps of implementation at PMTC with some notable success.
Mousavi, Bamdad. "Scalable Stream Processing and Management for Time Series Data." Thesis, Université d'Ottawa / University of Ottawa, 2021. http://hdl.handle.net/10393/42295.
Повний текст джерелаSee, Chong Meng Samson. "Space-time processing for wireless mobile communications." Thesis, Loughborough University, 1999. https://dspace.lboro.ac.uk/2134/25284.
Повний текст джерелаNyström, Simon, and Joakim Lönnegren. "Processing data sources with big data frameworks." Thesis, KTH, Data- och elektroteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-188204.
Повний текст джерелаBig data är ett koncept som växer snabbt. När mer och mer data genereras och samlas in finns det ett ökande behov av effektiva lösningar som kan användas föratt behandla all denna data, i försök att utvinna värde från den. Syftet med detta examensarbete är att hitta ett effektivt sätt att snabbt behandla ett stort antal filer, av relativt liten storlek. Mer specifikt så är det för att testa två ramverk som kan användas vid big data-behandling. De två ramverken som testas mot varandra är Apache NiFi och Apache Storm. En metod beskrivs för att, för det första, konstruera ett dataflöde och, för det andra, konstruera en metod för att testa prestandan och skalbarheten av de ramverk som kör dataflödet. Resultaten avslöjar att Apache Storm är snabbare än NiFi, på den typen av test som gjordes. När antalet noder som var med i testerna ökades, så ökade inte alltid prestandan. Detta visar att en ökning av antalet noder, i en big data-behandlingskedja, inte alltid leder till bättre prestanda och att det ibland krävs andra åtgärder för att öka prestandan.
Smit, Konrad van Zyl. "Applying the phi ratio in designing a musical scale." Thesis, Stellenbosch : University of Stellenbosch, 2005. http://hdl.handle.net/10019.1/2989.
Повний текст джерелаIn this thesis, an attempt is made to create an aesthetically pleasing musical scale based on the ratio of phi. Precedents for the application of phi in aesthetic fields exist; noteworthy is Le Corbusier’s architectural works, the measurements of which are based on phi. A brief discussion of the unique mathematical properties of phi is given, followed by a discussion of the manifestations of phi in the physical ratios as they appear in animal and plant life. Specific scales which have found an application in art music are discussed, and the properties to which their success is attributable are identified. Consequently, during the design of the phi scale, these characteristics are incorporated. The design of the phi scale is facilitated by the use of the most sophisticated modern computer software in the field of psychacoustics. During the scale’s design process, particular emphasis is placed on the requirement of obtaining maximal sensory consonance. For this reason, an in-depth discussion of the theories regarding consonance perception is undertaken. During this discussion, the reader’s attention is drawn to the difference between musical and perceptual consonance, and a discussion of the developmental history of musical consonance is given. Lastly, the scale is tested to see whether it complies with the requirements for successful scales.
Rydman, Oskar. "Data processing of Controlled Source Audio Magnetotelluric (CSAMT) Data." Thesis, Uppsala universitet, Geofysik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-387246.
Повний текст джерелаProjektet behandlar tre stycken metoder för att förbättra signalkvaliten hos Controlled Source Audio Magnetotellurics (CSAMT) data, dessa implementeras och deras för- och nackdelar diskuteras. Metoderna som hanteras är: Avlägsnandet av trender från tidsserier i tidsdomänen istället för i frekvensdomänen. Implementationen av ett koherenstest för att identifiera ”dåliga” datasegment ochavlägsna dessa från vidare beräkningar. Implementationen av en metod för att både hitta och avlägsna transienter (dataspikar) från tidsserien för att minska bakgrundsbruset i frekvensspektrat. Både avlägsnandet av trender samt transienter visar positiv inverkan på datakvaliteten,även om skillnaderna är relativt små (båda på ungefär 1-10%). På grund av begränsningarfrån mätdatan kunde inget meningsfullt koherenstest utformas. Överlag har processernasom diskuteras i rapporten förbättrat datakvaliten och kan ses som ett grundarbete förfortsatta förbättringar inom området.
田慶豐 and Hing-fung Ting. "Examples of time-message tradeoffs in distributed algorithms." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1988. http://hub.hku.hk/bib/B31208393.
Повний текст джерелаNarayanan, Shruthi (Shruthi P. ). "Real-time processing and visualization of intensive care unit data." Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/119537.
Повний текст джерелаThis electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student-submitted PDF version of thesis.
Includes bibliographical references (page 83).
Intensive care unit (ICU) patients undergo detailed monitoring so that copious information regarding their condition is available to support clinical decision-making. Full utilization of the data depends heavily on its quantity, quality and manner of presentation to the physician at the bedside of a patient. In this thesis, we implemented a visualization system to aid ICU clinicians in collecting, processing, and displaying available ICU data. Our goals for the system are: to be able to receive large quantities of patient data from various sources, to compute complex functions over the data that are able to quantify an ICU patient's condition, to plot the data using a clean and interactive interface, and to be capable of live plot updates upon receiving new data. We made significant headway toward our goals, and we succeeded in creating a highly adaptable visualization system that future developers and users will be able to customize.
by Shruthi Narayanan.
M. Eng.
Chun, Yang, Yang Hongling, and Zhou Jie. "STUDY ON HIGH-RATE TELEMETRY DATA REAL-TIME PROCESSING TECHNIQUES." International Foundation for Telemetering, 2000. http://hdl.handle.net/10150/608251.
Повний текст джерелаOwing to rapid development of PC industry, personal computer has been surprisingly improved on reliability and speed and it has been applied to many fields, such as aerospace, satellite and telemetry applications. As we all known, two aspects decide how fast the PC-based data acquisition can be reached. One aspect is CPU processing and the other is I/O bandwidth. Indeed, the first aspect has changed increasingly insignificant because the frequency of CPU has exceeded 700MHz which can satisfy fully the need of high rate data processing. So I/O bandwidth is the only key factor of the high rate PC-based data acquisition and we must adopt efficient data buffer techniques to satisfy the demand of telemetry data entry. This paper presents a buffered data channel which use memory mapping, EPLD and Dual-Port SRAM techniques. The operation platform of this design is WINDOWS95/98 and the software includes device driver and real-time processing routines.
Eberius, Julian. "Query-Time Data Integration." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-191560.
Повний текст джерелаBañuelos, Saucedo Miguel Angel. "Signal and data processing for THz imaging." Thesis, University of Manchester, 2014. https://www.research.manchester.ac.uk/portal/en/theses/signal-and-data-processing-for-thz-imaging(58a646f3-033b-4771-b1dc-d1f9fc6dfbf0).html.
Повний текст джерела尹翰卿 and Hon-hing Wan. "Efficient real-time scheduling for multimedia data transmission." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2002. http://hub.hku.hk/bib/B31227910.
Повний текст джерелаChung, Vera Yuk Ying. "Real-time image processing techniques using custom computing." Thesis, Queensland University of Technology, 2000.
Знайти повний текст джерелаFujinaga, Ichiro. "Adaptive optical music recognition." Thesis, McGill University, 1996. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=42033.
Повний текст джерелаThe strength of this system is its ability to learn new music symbols and handwritten notations. It also continually improves its accuracy in recognizing these objects by adjusting internal parameters. Given the wide range of music notation styles, these are essential characteristics of a music recognizer.
The implementation of the adaptive system is based on exemplar-based incremental learning, analogous to the idea of "learning by example," that identifies unknown objects by their similarity to one or more of the known stored examples. The entire process is based on two simple, yet powerful algorithms: k-nearest neighbour classifier and genetic algorithm. Using these algorithms, the system is designed to increase its accuracy over time as more data are processed.
Sandys, Sean David. "Requirement specifications for communication in distributed real-time systems /." Thesis, Connect to this title online; UW restricted, 2002. http://hdl.handle.net/1773/7002.
Повний текст джерелаCraig, David W. (David William) Carleton University Dissertation Engineering Electrical. "Light traffic loss of random hard real-time tasks in a network." Ottawa, 1988.
Знайти повний текст джерелаHerschel, Melanie, and Felix Naumann. "Space and time scalability of duplicate detection in graph data." Universität Potsdam, 2008. http://opus.kobv.de/ubp/volltexte/2009/3285/.
Повний текст джерелаGhosh, Kaushik. "Speculative execution in real-time systems." Diss., Georgia Institute of Technology, 1995. http://hdl.handle.net/1853/8174.
Повний текст джерелаThornlow, Robert Timothy. "Spectrum estimation using extrapolated time series." Thesis, Monterey, California : Naval Postgraduate School, 1990. http://handle.dtic.mil/100.2/ADA246554.
Повний текст джерелаThesis Advisor(s): Hippenstiel, Ralph. Second Reader: Tummala, Murali. "December 1990." Description based on title screen as viewed on March 30, 2010. DTIC Descriptor(s): Frequency, Density, Data Management, Models, Signal To Noise Ratio, Theses, Power Spectra, Sequences, Estimates, Short Range(Time), Spectra, Sampling, Fast Fourier Transforms, Extrapolation, Data Processing. DTIC Identifier(s): Power Spectra, Estimates, Time Series Analysis, Extrapolation, Density, Theses, Fast Fourier Transforms, Eigenvectors, Mathematical Prediction. Author(s) subject terms: Data Extrapolation, Periodogram, AR spectral estimates. Includes bibliographical references (p. 94). Also available in print.
Itagaki, Takebumi. "Real-time sound synthesis on a multi-processor platform." Thesis, Durham University, 1998. http://etheses.dur.ac.uk/4890/.
Повний текст джерелаHooman, Jozef. "Specification and compositional verification of real time systems /." Berlin [u.a.] : Springer, 1991. http://www.loc.gov/catdir/enhancements/fy0815/91041783-d.html.
Повний текст джерелаBurger, Joseph. "Real-time engagement area dvelopment program (READ-Pro)." Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2002. http://library.nps.navy.mil/uhtbin/hyperion-image/02Jun%5FBurger.pdf.
Повний текст джерелаTing, Hing-fung. "Examples of time-message tradeoffs in distributed algorithms /." [Hong Kong : University of Hong Kong], 1988. http://sunzi.lib.hku.hk/hkuto/record.jsp?B1234980X.
Повний текст джерелаArshad, Norhashim Mohd. "Real-time data compression for machine vision measurement systems." Thesis, Liverpool John Moores University, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.285284.
Повний текст джерелаBrouse, Andrew. "The interharmonium : an investigation into networked musical applications and brainwaves." Thesis, McGill University, 2001. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=33878.
Повний текст джерелаSidyakin, Ivan Mikhailovich. "Techniques for the development of time-constraint telemetric data processing system." Thesis, De Montfort University, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.438905.
Повний текст джерелаJun, Zhang, Feng MeiPing, Zhu Yanbo, He Bin, and Zhang Qishan. "A Real-Time Telemetry Data Processing System with Open System Architecture." International Foundation for Telemetering, 1994. http://hdl.handle.net/10150/611667.
Повний текст джерелаIn face of the characteristics of multiple data streams, high bit rate, variable data formats, complicated frame structure and changeable application environment, the programmable PCM telemetry system needs a new data processing system with advanced telemetry system architecture. This paper fully considers the characteristics of real-time telemetry data processing, analyzes the design of open system architecture for real-time telemetry data processing system(TDPS), presents an open system architecture scheme and design of real-time TDPS, gives the structure model of distributed network system, and develops the interface between network database and telemetry database, as well as telemetry processing software with man-machine interface. Finally, a practical and multi-functional real-time TDPS with open system architecture has been built, which based on UNIX operating system, supporting TCP/IP protocol and using Oracle relational database management system. This scheme and design have already proved to be efficient for real-time processing, high speed, mass storage and multi-user operation.
Lloyd, Joseph W. Jr. "POST-FLIGHT DATA DISTRIBUTION SYSTEM." International Foundation for Telemetering, 1993. http://hdl.handle.net/10150/608898.
Повний текст джерелаDesktop Processors (IBM PC, PC-compatible, and Macintosh) have made a major impact on how the Naval Air Warfare Center Aircraft Division (NAWCAD}, Patuxent River engineering community performs their work in aircraft weapons tests. The personal processors are utilized by the flight-test engineers not only for report preparation, but also for post-flight Engineering Unit (EU) data reduction and analysis. Present day requirements direct a need for improved post-flight data handling than those of the past. These requirements are driven by the need to analyze all the vehicle's parameters prior to the succeeding test flight, and to generate test reports in a more cost effective and timely manner. This paper defines the post-flight data distribution system at NAWCAD, Patuxent River, explains how these tasks were handled in the past, and the development of a real-time data storage designed approach for post-flight data handling. This engineering design is then described explaining how it sets the precedence for NAWCAD, Patuxent River's future plans; and how it provides the flight-test engineer with the test vehicle's EU data immediately available post-flight at his desktop processor.
Zhu, Wenyao. "Time-Series Feature Extraction in Embedded Sensor Processing System." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-281820.
Повний текст джерелаInbyggda sensorbaserade system monterade med tiotals eller hundratals senso- rer kan samla in enorma tidsseriedata, medan dataanalysen på dessa tidsserier vanligtvis utförs på en fjärrserver. Med utvecklingen av mikroprocessorer har behovet att flytta analysprocessen till de lokala inbäddade systemen ökat. I detta examensarbete är målet att undersöka vilka tidsserie-extraktionsmetoder som är lämpliga för de inbäddade sensorbehandlingssystemen.Som forskningsproblem för målet har vi undersökt traditionella statistik- metoder och maskininlärningsmetoder för tidsserie-data mining. För att be- gränsa forskningsområdet fokuserar examensarbet på likhetssökningsmetoder tillsammans med klusteralgoritmer från tidsserieens feature extraktionsper- spektiv. I projektet har vi valt och implementerat två klusteralgoritmer, K- means och Self-Organizing Map (SOM), i kombination med två likhetssök- ningsmetoder, det euklidiska avståndet och Dynamic Time Warping (DTW). Resultaten utvärderas med fyra offentliga datasätt med märkt data. Randin- dex (RI) används för att utvärdera noggrannheten. Vi har testat prestandan för noggrannhet och tidsförbrukning för de fyra kombinationerna av de valda al- goritmerna på den inbäddade plattformen.Resultaten visar att SOM med DTW i allmänhet kan uppnå bättre nog- grannhet med en relativt längre inferenstid än de andra utvärderade metoder- na. Kvantitativt kan SOM med DTW uföra klustring på ett tidsserieprov med 300 datapunkter för tolv klasser på 40 ms med en ESP32-inbäddad mikropro- cessor, vilket är en 4-procentig förbättring i noggrannhet i RI-poäng jämfört med det snabbaste K-medel klustringen med Euklidiskt avstånd. Vi drar slut- satsen att SOM med DTW algoritmen kan användas för att hantera tidsserie- klusteruppgifter på de inbäddade sensorbehandlingssystemen om tidsbehovet inte är så strängt.
Ivan-Roşu, Daniela. "Dynamic resource allocation for adaptive real-time applications." Diss., Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/9200.
Повний текст джерелаWan, Xiaogeng. "Time series causality analysis and EEG data analysis on music improvisation." Thesis, Imperial College London, 2014. http://hdl.handle.net/10044/1/23956.
Повний текст джерелаChen, Deji. "Real-time data management in the distributed environment /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.
Повний текст джерела