Добірка наукової літератури з теми "Thesis(doctorate)"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Thesis(doctorate)".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Thesis(doctorate)"
Carter, Susan. "Doctorate as genre: supporting thesis writing across campus." Higher Education Research & Development 30, no. 6 (December 2011): 725–36. http://dx.doi.org/10.1080/07294360.2011.554388.
Повний текст джерелаDemirok, Mukaddes Sakalli, Meyrem Besgul, and Basak Baglama. "A content analysis of the postgraduate thesis written on special education in turkey based on various variables (2009-2014)." Cypriot Journal of Educational Sciences 11, no. 2 (June 28, 2016): 92. http://dx.doi.org/10.18844/cjes.v11i2.901.
Повний текст джерелаPotolea, Dan, Steliana Toma, and Oana Monica Moșoiu. "Emergence of a new type of doctorate; professional doctorate." Studia Doctoralia 1, no. 1-2 (September 5, 2018): 7–25. http://dx.doi.org/10.47040/sd/sdpsych.v1i1-2.1.
Повний текст джерелаPotolea, Dan, Steliana Toma, and Oana Mosoiu. "Emergence of a new type of doctorate; professional doctorate." Studia Doctoralia 1, no. 1-2 (May 6, 2012): 7–25. http://dx.doi.org/10.47040/sd0000001.
Повний текст джерелаUzunboylu, Huseyin, and Senay Kocakoyun. "A content analysis of master and doctorate thesis in the area of gamification." International Journal of Innovative Research in Education 3, no. 3 (June 15, 2017): 143–54. http://dx.doi.org/10.18844/ijire.v3i3.1855.
Повний текст джерелаKettle, Martin. "Reflecting upon child protection – the professional doctorate journey." Higher Education, Skills and Work-based Learning 4, no. 2 (May 13, 2014): 184–95. http://dx.doi.org/10.1108/heswbl-10-2013-0016.
Повний текст джерелаCharles, Michael, Ben Farr-Wharton, Tania von der Heidt, and Neroli Sheldon. "Evaluating Perry’s structured approach for professional doctorate theses." Education + Training 59, no. 2 (February 13, 2017): 215–30. http://dx.doi.org/10.1108/et-02-2016-0025.
Повний текст джерелаLIMA, Patrícia Valle de Albuquerque. "O holismo em Jan Smuts e a Gestalt-terapia." PHENOMENOLOGICAL STUDIES - Revista da Abordagem Gestáltica 14, no. 1 (2008): 3–8. http://dx.doi.org/10.18065/rag.2008v14n1.1.
Повний текст джерелаFauzi, Nanang Bustanul, Muh Fatoni Rohman, and Maulfi Syaiful Rizal. "ANALISIS KESALAHAN EJAAN DAN KALIMAT DALAM SKRIPSI MAHASISWA SEBAGAI DASAR PENENTUAN STRATEGI, TUJUAN, DAN BAHAN AJAR MATA KULIAH BAHASA INDONESIA." BEBASAN Jurnal Ilmiah Kebahasaan dan Kesastraan 6, no. 1 (June 15, 2019): 52. http://dx.doi.org/10.26499/bebasan.v6i1.110.
Повний текст джерелаde Wilde, Maarten F. "Sharing the Pie: Taxing Multinationals in a Global Market." Intertax 43, Issue 6/7 (June 1, 2015): 438–46. http://dx.doi.org/10.54648/taxi2015040.
Повний текст джерелаДисертації з теми "Thesis(doctorate)"
Whippy, Nicola. "Professional Doctorate in Health Psychology : thesis portfolio." Thesis, London Metropolitan University, 2017. http://repository.londonmet.ac.uk/1464/.
Повний текст джерелаI think that this has helped me tremendously in building my confidence delivering training and I was able to continue this further and deliver the Make Every Contact Count (MECC) to other health professionals where needed. Finally, by the end of the course, I was training other staff members to deliver these two training sessions so there were more staff available when needed. This has allowed me to develop as an autonomous practitioner in both skills and confidence and I feel that it has prepared me for the delivery of future training. The competency I feel I sit most naturally in and throughout the course of the doctorate I delivered many behaviour change interventions, (Section C2, page 30). Throughout my training, I was regularly delivering interventions to clients who wanted to stop smoking and helping to support them through their behaviour change. Therefore, I decided to increase my knowledge and skills to a different area for the intervention report. I had the opportunity to work with a Child Weight Management Team at delivering a physical activity session at the end of each nutritional session within their programmes. This allowed me to develop the skills and experience needed to work with young children and their families in a health setting within weight management, not just adults. I enjoyed delivering these physical activity sessions and although initially, I was not sure how to deliver an effective session to children, the team were a great support. I am pleased that the outcome of the intervention increased attendance rates and later became an important part of their child weight management programmes.
Hawkin, Lucinda. "Thesis portfolio for the Professional Doctorate in Health Psychology." Thesis, London Metropolitan University, 2018. http://repository.londonmet.ac.uk/1534/.
Повний текст джерелаKotula, Martin [Verfasser]. "Development of a Risk-Oriented Strategic Sourcing (ROSS) Framework for the Construction and Electronics Manufacturing Industries : Doctorate Thesis / Martin Kotula." Berlin : epubli GmbH, 2016. http://d-nb.info/1081863811/34.
Повний текст джерелаNardan, Denise. "Acid hydrolysis of neutral glycosphingolipids thesis submitted in fulfillment of the degree of Doctorate of Philosophy, Auckland University of Technology, June 2007 /." Click here to access this resource online, 2007. http://repositoryaut.lconz.ac.nz/theses/1389/.
Повний текст джерелаZhang, Ting. "I Doctorate Program in Materials Science PhD Thesis Zn-Based Metal-Organic Frameworks Derived Materials for High-Efficient Carbon Dioxide Electrochemical Reduction." Doctoral thesis, Universitat Autònoma de Barcelona, 2021. http://hdl.handle.net/10803/673731.
Повний текст джерелаLa combustión excesiva de combustibles fósiles da como resultado la emisión de dióxido de carbono (CO2), que desencadenó crecientes problemas ambientales, como el calentamiento global, el aumento del nivel del mar, el clima extremo y la extinción de especies. Por lo tanto, las tecnologías para la conversión de CO2 en otros productos de valor jugaron un papel vital para eliminar la concentración de CO2 en la atmósfera. En ese sentido, la conversión electroquímica de CO2 alimentado por energía renovable en productos químicos útiles se considera una solución elegante para lograr el ciclo del carbono. Sin embargo, debido a la interioridad de las moléculas de CO2 y la reacción competitiva de evolución de hidrógeno (HER), los principales desafíos en el campo CO2 RR son el alto requerimiento de sobrepotencial que representa la termodinámica desfavorable y la baja eficiencia faradaica (FE) para los productos objetivo. Por lo tanto, la búsqueda de un electrocatalizador económico y de alta eficiencia es sensato y necesario para aplicaciones prácticas. En las últimas décadas, las estructuras organometálicas (MOF) absorbieron las enormes consideraciones en el campo de la electrocatálisis debido a su gran área de superficie específica, rica estructura de poros y sitios activos uniformemente dispersos. Aunque con grandes potenciales en electrocatálisis, la mayoría de los materiales MOF todavía sufren de actividad insuficiente, baja conductividad y poca estabilidad, lo que dificultaría sus aplicaciones prácticas. Especialmente, en el campo de CO2 RR, se deben considerar muchos parámetros importantes, incluida la alta eficiencia faradaica (FE), bajo sobrepotencial, gran densidad de corriente y estabilidad robusta, etc. Por lo tanto, el diseño racional de MOF para cumplir con los requisitos anteriores tanto como sea posible es crucial para explotar sus futuras aplicaciones de CO2 RR. Por lo tanto, en esta disertación, hicimos muchos esfuerzos para desarrollar catalizadores basados en MOFs / derivados de MOF con eficiencia, actividad y estabilidad superiores para aumentar el rendimiento de CO2 RR. Esta disertación se divide en 5 capítulos: El capítulo 1 es la información sobre los conceptos fundamentales sobre la CO2 RR electroquímico, que incluye la celda fundamental de la CO2 RR electroquímico, revisa los productos de reducción comunes y sus vías simples. Mientras tanto, la descripción general de los parámetros importantes que afectan la CO2 RR, incluidos los diferentes catalizadores en los últimos años y el electrolito, y las métricas relevantes que evalúan los electrocatalizadores. El Capítulo 2 trata de la fabricación de ZIF-8 modificado en superficie como electrodo basado en MOF para CO2 RR electroquímico para generar CO. En este trabajo, se preparó un ZIF-8 modificado en superficie mediante la introducción de una proporción muy pequeña de ácido 2,5-dihidroxitereftálico (DOBDC) en ZIF-8, logrando una densidad de corriente de CO mayor. En el Capítulo 3, se utiliza una ruta fácil para introducir grupos que contienen O con enlaces axiales en un catalizador de Fe-N-C a través de la pirólisis de estructuras orgánicas metálicas a base de Zn dopado con Fe (IRMOF-3), formando átomos únicos de Fe altamente dispersos con sitios activos HO-FeN4. Debido a la modulación del ambiente local inducida por tales grupos -OH, el catalizador D-Fe-N-C exhibe una actividad CO2 RR mejorada, incluida una alta selectividad con alta eficiencia Faradaica de CO y una estabilidad sólida. En el capítulo 4, proponemos que la introducción de átomos de Fe en catalizadores de Ni-N-C fabrica catalizadores de un solo átomo de metal doble (Ni/Fe-N-C) hacia CO2 RR para lograr una alta selectividad y actividad simultáneamente. El catalizador de doble metal optimizado mostró excelentes rendimientos, obteniendo una alta selectividad con eficiencia faradaica CO a un bajo sobrepotencial, superior a las contrapartes de un solo metal. Finalmente, el Capítulo 5 resume las conclusiones generales.
The excessive combustion of fossil fuels results in the emission of carbon dioxide (CO2), which triggers increasing environmental problems, such as, global warming, rising sea levels, extreme weather, and species extinction. Therefore, the technologies for conversion of CO2 into other value products plays a vital role in order to eliminate the CO2 concentration in atmosphere. Thereinto, electrochemical conversion of CO2 powered by renewable energy to useful chemicals is considered as an elegant solution to achieve the carbon cycle. However, due to the innerness of CO2 molecules and competitive hydrogen evolution reaction (HER), the main challenges in the field CO2 RR are the high overpotential requirement that represents the unfavourable thermodynamics and low Faradaic efficiency (FE) for the target products. Therefore, searching for a high-efficient and cost-friendly electrocatalyst is sensible and necessary for practical applications. In the past decades, metal-organic frameworks (MOFs) engrossed the enormous considerations in the field of electrocatalysis because of their large specific surface area, rich pore structure, and uniformly dispersed active sites. Although they have a great potential in electrocatalysis, most MOFs materials still suffer from insufficient activity, low conductivity, and poor stability, which would hinder their practical applications. Especially, in the field of CO2 RR, many important parameters, including high FE, low overpotential, large current density and robust stability among others, should be considered. Thus, the rational design of MOFs to fulfil the above requirements as much as possible is crucial for exploiting their future in CO2 RR applications. Therefore, in this dissertation, we made many efforts to develop MOFs-based/derived catalysts with superior efficiency, activity, and stability for boosting the CO2 RR performance. This dissertation is divided into 5 chapters: Chapter 1 is the insights on the fundamental concepts about electrochemical CO2 RR, which includes the fundamental cell of electrochemical CO2 RR, reviews the common reduction products and their simple pathways. Meanwhile, the overview of important parameters affecting CO2 RR, including different catalysts over the past years, electrolyte, and the relevant metrics evaluating the electrocatalysts as well as limitations of electrochemical CO2 reduction are also presented in this chapter. In addition, this chapter summarizes the fundamental concepts about MOFs materials and their high-temperature pyrolysis derived materials as the electrocatalysts. Chapter 2 deals with the fabrication of surface modified ZIF-8 as MOFs-based electrode for electrochemical CO2 RR to generate CO. In this work, a surface modified ZIF-8 has been prepared through introducing a very small proportion 2,5-dihidroxyterephthalic acid (DOBDC) into ZIF-8, achieving a higher current density of CO and a boosted Faradaic efficiency. In Chapter 3, a facile route is used to introduce axial bonded O-containing groups into a Fe-N-C catalyst through pyrolysis of Fe-doped Zn-based metal organic frameworks (IRMOF-3), forming highly dispersed Fe single atoms with HO-FeN4 active sites. Due to the local environment modulation induced by such -OH groups, the D-Fe-N-C catalyst exhibits an enhanced CO2 RR activity, including a high selectivity with CO Faradaic efficiency, and a robust stability, which is higher than that of the reported normal FeN4 sites without -OH groups. In Chapter 4, we proposed that introducing Fe atoms into Ni-N-C catalysts fabricates double metal (bimetallic) single-atom catalysts (Ni/Fe-N-C) towards CO2 RR to achieve a high selectivity and activity simultaneously. The optimized double-metal Ni/Fe-N-C catalyst showed an excellent performance, obtaining a high selectivity with a high CO Faradaic efficiency at a low overpotential. The performance obtained is superior to both single metal counterparts and other state-of-the-art M-N-C catalysts, proving that regulating single active sites with a second metal site potentially breaks the single metal-based activity benchmark to obtain the high selectivity and activity in CO2 RR, simultaneously. Finally, Chapter 5 summarizes the general conclusions.
Universitat Autònoma de Barcelona. Programa de Doctorat en Ciència de Materials
Yeoman, Carl. "The auxiliary replicons of Butyrivibrio proteoclasticus : a thesis presented in fulfilment of the Doctorate of Philosophy degree at Massey University, Palmerston North, New Zealand." Massey University, 2009. http://hdl.handle.net/10179/983.
Повний текст джерелаGarland, Angela Marie. "Power relationships within a corporate finance department a Foucauldian approach to corporate hierarchies and resistance : a thesis submitted for approval for fulfilment of the requirements of a degree of Doctorate of Philosophy from Auckland University of Technology, Auckland, New Zealand, 2007 /." Click here to access this resource online, 2007. http://repositoryaut.lconz.ac.nz/theses/1336/.
Повний текст джерелаPrimary supervisor : Professor Keith Hooper. Secondary supervisor : Dr Andy Godfrey. At head of title: Doctorate of Philosophy: a thesis. Includes bibliographical references. Also held in print (ix, 192 leaves : ill. ; 30 cm.) in City Campus Theses Collection (T 658.3145 GAR)
Fenollosa, Artés Felip. "Contribució a l'estudi de la impressió 3D per a la fabricació de models per facilitar l'assaig d'operacions quirúrgiques de tumors." Doctoral thesis, Universitat Politècnica de Catalunya, 2019. http://hdl.handle.net/10803/667421.
Повний текст джерелаLa presente tesis doctoral se ha centrado en el reto de conseguir, mediante Fabricación Aditiva (FA), modelos para ensayo quirúrgico, bajo la premisa que los equipos para obtenerlos tendrían que ser accesibles al ámbito hospitalario. El objetivo es facilitar la extensión del uso de modelos como herramienta de preparación de operaciones quirúrgicas, transformando la práctica médica actual de la misma manera que, en su momento, lo hicieron tecnologías como las que facilitaron el uso de radiografías. El motivo de utilizar FA, en lugar de tecnologías más tradicionales, es su capacidad de materializar de forma directa los datos digitales obtenidos de la anatomía del paciente mediante sistemas de escaneado tridimensional, haciendo posible la obtención de modelos personalizados. Los resultados se centran en la generación de nuevo conocimiento para conseguir equipamientos de impresión 3D multimateriales accesibles que permitan la obtención de modelos miméticos respecto a los tejidos vivos. Para facilitar la buscada extensión de la tecnología, se ha focalizado en las tecnologías de código abierto como la Fabricación por Hilo Fundido (FFF) y similares basadas en líquidos catalizables. Esta investigación se alinea dentro de la actividad de desarrollo de la FA en el CIM UPC, y en este ámbito concreto con la colaboración con el Hospital Sant Joan de Déu de Barcelona (HSJD). El primer bloque de la tesis incluye la descripción del estado del arte, detallando las tecnologías existentes y su aplicación al entorno médico. Se han establecido por primera vez unas bases de caracterización de los tejidos vivos – principalmente blandos – para dar apoyo a la selección de materiales que los puedan mimetizar en un proceso de FA, a efectos de mejorar la experiencia de ensayo de los cirujanos. El carácter rígido de los materiales mayoritariamente usados en impresión 3D los hace poco útiles para simular tumores y otras referencias anatómicas. De forma sucesiva, se tratan parámetros como la densidad, la viscoelasticidad, la caracterización de materiales blandos en la industria, el estudio del módulo elástico de tejidos blandos y vasos, la dureza de los mismos, y requerimientos como la esterilización de los modelos. El segundo bloque empieza explorando la impresión 3D mediante FFF. Se clasifican las variantes del proceso desde el punto de vista de la multimaterialidad, esencial para hacer modelos de ensayo quirúrgico, diferenciando entre soluciones multiboquilla y de mezcla en el cabezal. Se ha incluido el estudio de materiales (filamentos y líquidos) que serían más útiles para mimetizar tejidos blandos. Se constata como en los líquidos, en comparación con los filamentos, la complejidad del trabajo en procesos de FA es más elevada, y se determinan formas de imprimir materiales muy blandos. Para acabar, se exponen seis casos reales de colaboración con el HJSD, una selección de aquellos en los que el doctorando ha intervenido en los últimos años. El origen se encuentra en la dificultad del abordaje de operaciones de resección de tumores infantiles como el neuroblastoma, y en la iniciativa del Dr. Lucas Krauel. Finalmente, el Bloque 3 desarrolla numerosos conceptos (hasta 8), actividad completada a lo largo de los últimos cinco años con el apoyo de los medios del CIM UPC y de la actividad asociada a trabajos finales de estudios de estudiantes de la UPC, llegándose a materializar equipamientos experimentales para validarlos. La investigación amplia y sistemática al respecto hace que se esté más cerca de disponer de una solución de impresión 3D multimaterial de sobremesa. Se determina que la mejor vía de progreso es la de disponer de una pluralidad de cabezales independientes, a fin de capacitar la impresora 3D para integrar diversos conceptos estudiados, materializándose una posible solución. Para cerrar la tesis, se plantea cómo sería un equipamiento de impresión 3D para modelos de ensayo quirúrgico, a fin de servir de base para futuros desarrollos.
Savage, Catherine. "Amputation without anaesthetic : 2004 Network Review : school and community reorganisation : a thesis submitted for the degree of Education doctorate at Massey University, Palmerston North, New Zealand." 2005. http://hdl.handle.net/10179/1568.
Повний текст джерелаPeng, Hai Hong. "Rumen microbial degradation of diaminobutyric acid, a non-protein amino acid : thesis submitted for the degree of Doctorate of Philosophy in the University of Adelaide, South Australia / by Hai Hong Peng." 2003. http://hdl.handle.net/2440/22452.
Повний текст джерелаIncludes bibliographical references (leaves 172-204)
xx, 204 leaves : ill. ; 30 cm.
Title page, contents and abstract only. The complete thesis in print form is available from the University Library.
Thesis (Ph.D.)--University of Adelaide, Dept. of Animal Science, 2003
Книги з теми "Thesis(doctorate)"
REGISTER, Dose. Ph. D. NOTEBOOK : Scholars,doctorate,philosophers: Phd Thesis,dissertation,research,analysis,record Keeping Journal,composition Book. Independently Published, 2021.
Знайти повний текст джерелаGriffiths, David J., David Derbes, and Richard B. Sohn, eds. Sidney Coleman's Lectures on Relativity. Cambridge University Press, 2021. http://dx.doi.org/10.1017/9781009053716.
Повний текст джерелаLorregion, Shukanamahick. Theses Research and Topic Notebook: 200 Pages Blank and Ruled Notebook, Positive and Self Inspiring Proclamation Journal for Doctorate Scholars, Research Students, PHD Aspirants, for Thesis and Topic Writing, Can Be Used As Theses/dissertation Planner. Independently Published, 2021.
Знайти повний текст джерелаЧастини книг з теми "Thesis(doctorate)"
Goodwin, Graham C., and Stefan F. Graebe. "How to Write Your Thesis." In A Doctorate and Beyond, 89–92. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-45877-9_13.
Повний текст джерелаMartin, Brian. "Writing Regularly as a Thesis-Completion Strategy." In Traversing the Doctorate, 179–92. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-23731-8_10.
Повний текст джерелаHo, Siu Cheung, and Kong Bieng Chuah. "Application of MSTAM Methodology in Project Management." In Advances in Human and Social Aspects of Technology, 298–323. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-7152-0.ch015.
Повний текст джерелаHo, Siu Cheung, and Kong Bieng Chuah. "Application of MSTAM Methodology in Project Management." In Research Anthology on Cross-Disciplinary Designs and Applications of Automation, 135–60. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-6684-3694-3.ch008.
Повний текст джерелаTuran, Selahattin, Yeşim Özer Özkan, and Metin Özkan. "Turkish Academicians' Doctoral Processes." In Navigating Post-Doctoral Career Placement, Research, and Professionalism, 251–67. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-5065-6.ch011.
Повний текст джерелаAkman, Elvettin, Çiğdem Akman, and Pelin Babaoğlu. "Analysis of the Textbooks Utilized in Higher Education on Local Government in Terms of Their Physical Characteristics and Contents." In Public Affairs Education and Training in the 21st Century, 312–24. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-8243-5.ch020.
Повний текст джерела"Marian Małowist on History and Historians." In Polin: Studies in Polish Jewry Volume 13, edited by Antony Polonsky, 331–44. Liverpool University Press, 2000. http://dx.doi.org/10.3828/liverpool/9781874774600.003.0027.
Повний текст джерелаHunt, Tony. "Brian Woledge 1904–2002." In Proceedings of the British Academy, Volume 153 Biographical Memoirs of Fellows, VII. British Academy, 2008. http://dx.doi.org/10.5871/bacad/9780197264348.003.0016.
Повний текст джерелаBlack, Nicky. "The Nine Myths of the Doctorate: A Beautiful Conspiracy." In Thesis Survivor Stories. Bridget Williams Books, 2022. http://dx.doi.org/10.7810/9781990046421_1.
Повний текст джерелаNickson, Dennis. "Publishing from your thesis." In How to Keep your Doctorate on Track, 408–9. Edward Elgar Publishing, 2020. http://dx.doi.org/10.4337/9781788975636.00063.
Повний текст джерелаТези доповідей конференцій з теми "Thesis(doctorate)"
Ivey, Paul C., Michael L. Sanderson, Vivien Morris, and Derek G. Ferguson. "The Engineering Doctorate — An ‘Enhanced’ Doctoral Programme for Engineers Incorporating Business Decision-Making Skills: A Gas-Turbine Engineering Perspective." In ASME Turbo Expo 2000: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/2000-gt-0582.
Повний текст джерелаCrosta, Lucilla, Anthony Edwards, Ruolan Wang, Josè Manuel Reisjorge, and Mageswary Mudaliar. "HOW INTERNATIONAL ONLINE STUDENTS FROM A PROFESSIONAL DOCTORATE IN EDUCATION ARE USING SOCIAL MEDIA AND ARTIFICIAL INTELLIGENCE TOOLS INTO THE THESIS STAGE?" In 10th International Conference on Education and New Learning Technologies. IATED, 2018. http://dx.doi.org/10.21125/edulearn.2018.0459.
Повний текст джерелаPearce Churchill, Meryl, Daniel Lindsay, Diana H Mendez, Melissa Crowe, Nicholas Emtage, and Rhondda Jones. "Does Publishing During the Doctorate Influence Completion Time? A Quantitative Study of Doctoral Candidates in Australia." In InSITE 2022: Informing Science + IT Education Conferences. Informing Science Institute, 2022. http://dx.doi.org/10.28945/4912.
Повний текст джерелаBrown, Eugene F., Alireza Haghighat, and Mark Pierson. "Re-Establishment of the Nuclear Engineering Program at Virginia Tech." In 2014 22nd International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/icone22-31138.
Повний текст джерела