Добірка наукової літератури з теми "Thermoplastic composite armors reinforced"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Thermoplastic composite armors reinforced".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Thermoplastic composite armors reinforced"
Bandaru, Aswani Kumar, Vikrant V. Chavan, Suhail Ahmad, R. Alagirusamy, and Naresh Bhatnagar. "Ballistic impact response of Kevlar® reinforced thermoplastic composite armors." International Journal of Impact Engineering 89 (March 2016): 1–13. http://dx.doi.org/10.1016/j.ijimpeng.2015.10.014.
Повний текст джерелаBandaru, Aswani Kumar, Suhail Ahmad, and Naresh Bhatnagar. "Ballistic performance of hybrid thermoplastic composite armors reinforced with Kevlar and basalt fabrics." Composites Part A: Applied Science and Manufacturing 97 (June 2017): 151–65. http://dx.doi.org/10.1016/j.compositesa.2016.12.007.
Повний текст джерелаMayer, P., D. Pyka, K. Jamroziak, J. Pach, and M. Bocian. "Experimental and Numerical Studies on Ballistic Laminates on the Polyethylene and Polypropylene Matrix." Journal of Mechanics 35, no. 02 (November 15, 2017): 187–97. http://dx.doi.org/10.1017/jmech.2017.103.
Повний текст джерелаAyvaz, Mehmet, and Hakan Cetinel. "Ballistic performance of powder metal Al5Cu-B4C composite as monolithic and laminated armor." Materials Testing 63, no. 6 (June 1, 2021): 512–18. http://dx.doi.org/10.1515/mt-2020-0084.
Повний текст джерелаKling, Veronika, Sohel Rana, and Raul Fangueiro. "Fibre Reinforced Thermoplastic Composite Rods." Materials Science Forum 730-732 (November 2012): 331–36. http://dx.doi.org/10.4028/www.scientific.net/msf.730-732.331.
Повний текст джерелаVasquez, Jasmin Z., and Leslie Joy L. Diaz. "Unidirectional Abaca Fiber Reinforced Thermoplastic Starch Composite." Materials Science Forum 894 (March 2017): 56–61. http://dx.doi.org/10.4028/www.scientific.net/msf.894.56.
Повний текст джерелаAzrin Hani Abdul, Rashid, Ahmad Roslan, Mariatti Jaafar, Mohd Nazrul Roslan, and Saparudin Ariffin. "Mechanical Properties Evaluation of Woven Coir and Kevlar Reinforced Epoxy Composites." Advanced Materials Research 277 (July 2011): 36–42. http://dx.doi.org/10.4028/www.scientific.net/amr.277.36.
Повний текст джерелаOstgathe, M., C. Mayer, and M. Neitzel. "Continuous Manufacturing of Thermoplastic Composite Sheets." Engineering Plastics 4, no. 7 (January 1996): 147823919600400. http://dx.doi.org/10.1177/147823919600400705.
Повний текст джерелаOstgathe, M., C. Mayer, and M. Neitzel. "Continuous Manufacturing of Thermoplastic Composite Sheets." Polymers and Polymer Composites 4, no. 7 (October 1996): 505–12. http://dx.doi.org/10.1177/096739119600400705.
Повний текст джерелаde Miranda, L. F., L. H. Silveira, Leonardo Gondim Andrade e Silva, and Antônio Hortêncio Munhoz Jr. "Irradiation of a Polypropilene-Glass Fiber Composite." Advances in Science and Technology 71 (October 2010): 138–44. http://dx.doi.org/10.4028/www.scientific.net/ast.71.138.
Повний текст джерелаДисертації з теми "Thermoplastic composite armors reinforced"
Ekström, Lars Johan. "Welding of bistable fibre-reinforced thermoplastic composite pipelines." Thesis, University of Cambridge, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.614933.
Повний текст джерелаWu, Xiang. "Thermoforming continuous fiber reinforced thermoplastic composites." Diss., Georgia Institute of Technology, 1990. http://hdl.handle.net/1853/9383.
Повний текст джерелаHowes, Jeremy C. "Interfacial strength development in thermoplastic resins and fiber-reinforced thermoplastic composites." Thesis, Virginia Polytechnic Institute and State University, 1987. http://hdl.handle.net/10919/77899.
Повний текст джерелаMaster of Science
Leach, David W. "An experimental study of the processing parameters in thermoplastic filament winding." Thesis, Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/16030.
Повний текст джерелаClaassen, Marius. "A reconfigurable manufacturing system for thermoplastic fibre-reinforced composite parts : a feasibility assessment." Thesis, Stellenbosch : Stellenbosch University, 2015. http://hdl.handle.net/10019.1/97045.
Повний текст джерелаENGLISH ABSTRACT: The South African manufacturing industry plays a pivotal role in the growth of its local economy. Modern manufacturing requirements include the ability to respond quickly to product variability, fluctuations in product demand and new process technologies. The reconfigurable manufacturing paradigm has been proposed to meet the demands of the new manufacturing requirements. In order to assess the feasibility of incorporating automated, reconfigurable manufacturing technologies into the production process of thermoplastic fibre-reinforced composite parts, a system, based on the thermoforming process, that implements these technologies was developed and evaluated. The assessment uses a seat pan for commercial aircraft as case study. Aspects that were addressed include the architecture, configuration and control of the system. The architecture and configuration addressed the sheet cutting, fixturing, reinforcing, heating, forming, quality assurance and transportation. The control, implemented using agents and based on the ADACOR holonic reference architecture, addresses the cell control requirements of the thermoforming process. An evaluation of the system’s reconfigurability and throughput is performed using KUKA Sim Pro. The evaluation of the system’s throughput is compared to the predicted throughput of the conventional technique for manufacturing thermoplastic fibre reinforced composite parts in a thermoforming process. The evaluation of the system’s performance show that the system designed in this thesis for the manufacture of a thermoplastic fibre-reinforced composite seat pan sports a significant advantage in terms of throughput rate, which demonstrates its technical feasibility. The evaluation of the system’s reconfigurability show that, through its ability to handle new hardware and product changes, it exhibits the reconfigurability characteristics of modularity, convertibility, integrability and scalability.
AFRIKAANSE OPSOMMING: Die Suid-Afrikaanse vervaardigingsbedryf speel 'n sentrale rol in die groei van die plaaslike ekonomie. Moderne vervaardiging vereistes sluit in die vermoë om vinnig te reageer op die produk veranderlikheid, skommelinge in die produk aanvraag en nuwe proses tegnologieë. Die herkonfigureerbare vervaardiging paradigma is voorgestel om te voldoen aan die nuwe produksie vereistes. Ten einde die uitvoerbaarheid van die integrasie van outomatiese, herkonfigureerbare vervaardiging-tegnologieë in die produksieproses van veselversterkte saamgestelde onderdele te evalueer, is 'n stelsel, gebaseer op die termo-vormingsproses, wat sulke tegnologieë implementeer, ontwikkel. Die assessering gebruik 'n sitplek pan vir kommersiële vliegtuie as gevallestudie. Aspekte wat aangespreek is sluit in die argitektuur, konfigurasie en beheer van die vervaardigingstelsel. Die argitektuur en konfigurasie spreek aan die sny, setmate, versterking, verwarming, vorm, gehalteversekering en vervoer van n veselversterkte saamgestelde sitplek pan in 'n termo-vormingsproses. Die beheer, geïmplementeer deur die gebruik van agente en gebaseer op die ADACOR holoniese verwysing argitektuur, spreek die selbeheervereistes van die termo-vormingsproses aan. 'n Evaluering van die stelsel se herkonfigureerbaarheid en deurvoer word gedoen met die behulp van KUKA Sim Pro. Die evaluering van die stelsel se deurvoer word vergelyk met die deurvoer van die konvensionele vervaardigingsproses vir termoplastiese vessel-versterkte saamgestelde onderdele in 'n termo-vormingsproses. Die evaluering van die stelsel se prestasie toon dat die stelsel wat in hierdie tesis ontwerp is vir die vervaardiging van 'n termoplastiese vessel-versterkte saamgestelde sitplek pan, hou 'n beduidende voordeel, in terme van deurvloeikoers, in wat die stelsel se tegniese haalbaarheid toon. Die evaluering van die stelsel se herkonfigureerbaarheid wys dat, deur middel van sy vermoë om nuwe hardeware en produk veranderinge te hanteer, die stelsel herkonfigureerbare einskappe van modulariteit, inwisselbaarheid, integreerbaarheid en skaalbaarheid vertoon.
Brunnacker, Lena. "Short Carbon Fiber-Reinforced Thermoplastic Composites for Jet Engine Components." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-76733.
Повний текст джерелаLUPONE, FEDERICO. "Additive manufacturing of carbon fiber reinforced thermoplastic polymer composites." Doctoral thesis, Politecnico di Torino, 2022. http://hdl.handle.net/11583/2966347.
Повний текст джерелаGray, Robert Williamson IV. "The Effects of Processing Conditions on Thermoplastic Prototypes Reinforced with Thermotropic Liquid Crystalline Polymers." Thesis, Virginia Tech, 1997. http://hdl.handle.net/10919/46512.
Повний текст джерелаMaster of Science
Beguinel, Johanna. "Interfacial adhesion in continuous fiber reinforced thermoplastic composites : from micro-scale to macro-scale." Thesis, Lyon, 2016. http://www.theses.fr/2016LYSEI051.
Повний текст джерелаThe present study was initiated by the development of a new processing route, i.e. latex-dip impregnation, for thermoplastic (TP) acrylic semi-finished materials. The composites resulting from thermocompression of TPREG I plies were studied by focusing of interfacial adhesion. Indeed the fiber/matrix interface governs the stress transfer from matrix to fibers. Thus, a multi-scale analysis of acrylic matrix/fiber interfaces was conducted by considering microcomposites, as models for fiber-based composites, and unidirectional (UD)macro-composites. The study displayed various types of sized glass and carbon fibers. On one hand, the correlation between thermodynamic adhesion and practical adhesion, resulting from micromechanical testing, is discussed by highlighting the role of the physico-chemistry of the created interphase. Wetting and thermodynamical adhesion are driven by the polarity of the film former of the sizing. On the other hand, in-plane shear modulus values from off-axis tensile test results on UD composites are consistent with the quantitative analyses of the interfacial shear strength obtained from microcomposites. More specifically, both tests have enabled a differentiation of interface properties based on the fiber sizing nature for glass and carbon fiber-reinforced (micro-)composites. The study of overall mechanical and interface properties of glass and carbon fiber/acrylic composites revealed the need for tailoring interfacial adhesion. Modifications of the matrix led to successful increases of interfacial adhesion in glass fiber/acrylic composites. An additional hygrothermal ageing study evidenced a significant loss of interfacial shear strength at micro-scale which was not observed for UD composites. The results of this study are a first step towards a database of relevant interface properties of structural TP composites. Finally, the analyses of interfaces/phases at different scales demonstrate the importance of a multi-scale approach to tailor the final properties of composite parts
Louwsma, Jeroen. "Synthesis and investigation of oligomers based on phenylalanine as interfacial agents in fibre-reinforced thermoplastic composite materials." Thesis, Strasbourg, 2018. http://www.theses.fr/2018STRAF047.
Повний текст джерелаThe development of interfacial agents for fibre-reinforced composite materials is needed to obtain performant materials especially for the automotive industry. The project focused on the synthesis of sequence-controlled oligomers prepared by solid phase synthesis using amidation and copper-assisted alkyne-azide cycloaddition reactions to introduce precisely phenylalanine and aliphatic building blocks. These oligomers were evaluated as potential interfacial agents for Kevlar fibre-reinforced polypropylene composite materials. Their ability to adsorb on the fibres was investigated qualitatively by scanning electron microscopy and quantitatively by gravimetric analysis. Some preliminary experiments on the Kevlar fibres treated with some of the synthesised oligomers in a polypropylene matrix were conducted to estimate their potential use in composite materials
Книги з теми "Thermoplastic composite armors reinforced"
C, Loos Alfred, and United States. National Aeronautics and Space Administration., eds. Interfacial strength development in thermoplastic resins and fiber-reinforced thermoplastic composites. Blacksburg, Va: College of Engineering, Virginia Polytechnic and State University, 1987.
Знайти повний текст джерелаH, Hou T., Tiwari S. N, and United States. National Aeronautics and Space Administration., eds. Analysis of pultrusion processing for long fiber reinforced thermoplastic composite system. Norfolk, Va: Old Dominion University, 1993.
Знайти повний текст джерелаSchlechter, Melvin. Composites: Resins, fillers, reinforcements, natural fibers and nanocomposites. Norwalk, CT: Business Communications Co., 2002.
Знайти повний текст джерелаAnalysis of pultrusion processing for long fiber reinforced thermoplastic composite system. Norfolk, Va: Old Dominion University, 1993.
Знайти повний текст джерелаAn improved compression molding technology for continuous fiber reinforced composite laminate: Part 1: AS-4/LaRC-TPI 1500 (HFG) prepreg system. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.
Знайти повний текст джерелаЧастини книг з теми "Thermoplastic composite armors reinforced"
Russo, Pietro, Giorgio Simeoli, Valentina Lopresto, Antonio Langella, and Ilaria Papa. "Environmental Friendly Thermoplastic Composite Laminates Reinforced with Jute Fabric." In Advances in Natural Fibre Composites, 119–26. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-64641-1_11.
Повний текст джерелаCervenka, A. "Composite Pipes Based on Thermoplastic Matrices Reinforced by Continuous Fibres." In Mechanics of Composite Materials and Structures, 309–18. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-011-4489-6_18.
Повний текст джерелаGutiérrez, Tomy J., Romina Ollier, and Vera A. Alvarez. "Surface Properties of Thermoplastic Starch Materials Reinforced with Natural Fillers." In Springer Series on Polymer and Composite Materials, 131–58. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-66417-0_5.
Повний текст джерелаMartin, T. A., D. Bhattachryya, and R. B. Pipes. "Computer-Aided Grid Strain Analysis in Fibre Reinforced Thermoplastic Sheet Forming." In Computer Aided Design in Composite Material Technology III, 143–62. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2874-2_10.
Повний текст джерелаAzaman, M. D., S. M. Sapuan, S. Sulaiman, E. S. Zainudin, and A. Khalina. "Processability of Wood Fibre-Filled Thermoplastic Composite Thin-Walled Parts Using Injection Moulding." In Manufacturing of Natural Fibre Reinforced Polymer Composites, 351–67. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-07944-8_17.
Повний текст джерелаMitscherling, J., and W. Michaeli. "An Extended Model for the Forming Simulation of Fabric Reinforced Thermoplastic Prepregs." In Developments in the Science and Technology of Composite Materials, 113–18. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0787-4_13.
Повний текст джерелаLeterrier, Y., C. G’sell, and A. Gerard. "Structural Evolution of a Stamping Reinforced Thermoplastic (SRT) in Both Extensional and Shearing Flows." In Developments in the Science and Technology of Composite Materials, 1067–72. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0787-4_154.
Повний текст джерелаKim, Jin Woo, and Dong Gi Lee. "Effect of Fiber Content and Fiber Orientation on the Tensile Strength in Glass Mat Reinforced Thermoplastic Sheet." In Advances in Composite Materials and Structures, 337–40. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.337.
Повний текст джерелаBrecher, C., M. Emonts, J. Stimpfl, and A. Kermer-Meyer. "Production of Customized Hybrid Fiber-Reinforced Thermoplastic Composite Components Using Laser-Assisted Tape Placement." In Lecture Notes in Production Engineering, 123–29. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-01964-2_17.
Повний текст джерелаBar, Mahadev, R. Alagirusamy, and Apurba Das. "Advances in Natural Fibre Reinforced Thermoplastic Composite Manufacturing: Effect of Interface and Hybrid Yarn Structure on Composite Properties." In Advances in Natural Fibre Composites, 99–117. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-64641-1_10.
Повний текст джерелаТези доповідей конференцій з теми "Thermoplastic composite armors reinforced"
Skeie, Geir, Nils Sødahl, and Dag McGeorge. "Cross Section Analysis of Flexible Risers Including Composite Layers." In ASME 2022 41st International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/omae2022-81326.
Повний текст джерелаNino, Giovanni, Harald Bersee, Adriaan Beukers, and Tahira Ahmed. "Erosion of Fiber Reinforced Thermoplastic Composite Structures." In 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
16th AIAA/ASME/AHS Adaptive Structures Conference
10t. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2008. http://dx.doi.org/10.2514/6.2008-1909.
Meyer, Didier, Paola Carnevale, Harald Bersee, and Adriaan Beukers. "New Affordable Reinforced Thermoplastic Composite for Structural Aircraft Applications." In 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2009. http://dx.doi.org/10.2514/6.2009-2337.
Повний текст джерелаLiang, Jiaai, and Shankar Kalyanasundaram. "Failure behavior of a glass-fiber reinforced thermoplastic composite." In 2ND INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS AND MATERIAL ENGINEERING (ICCMME 2017). Author(s), 2017. http://dx.doi.org/10.1063/1.4983583.
Повний текст джерелаSelim, M., M. Moore, J. Lee, and A. Green. "A Sustainable and Durable Glass Reinforced Thermoplastic Composite Railroad Crosstie." In CAMX 2019. NA SAMPE, 2019. http://dx.doi.org/10.33599/nasampe/c.19.0831.
Повний текст джерелаSaito, Takeshi, Ryo Morimoto, Masaru Imamura, Akio Ohtani, and Asami Nakai. "Dimensional and Internal Structural Design for Braided Fabric Reinforced Thermoplastic Composite." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-64416.
Повний текст джерелаSorrentino, L., L. Cafiero, M. D’Auria, and S. Iannace. "Processing and properties of multiscale cellular thermoplastic fiber reinforced composite (CellFRC)." In THE SECOND ICRANET CÉSAR LATTES MEETING: Supernovae, Neutron Stars and Black Holes. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4937309.
Повний текст джерелаMaron, Bernhard, Christian Garthaus, Florian Lenz, Andreas Hornig, Michael Hübner, and Maik Gude. "Forming of carbon fiber reinforced thermoplastic composite tubes - Experimental and numerical approaches." In ESAFORM 2016: Proceedings of the 19th International ESAFORM Conference on Material Forming. Author(s), 2016. http://dx.doi.org/10.1063/1.4963584.
Повний текст джерелаKuhtz, M., B. Maron, A. Hornig, M. Müller, A. Langkamp, and M. Gude. "Characterising the thermoforming behaviour of glass fibre textile reinforced thermoplastic composite materials." In PROCEEDINGS OF THE 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2018. Author(s), 2018. http://dx.doi.org/10.1063/1.5034815.
Повний текст джерелаMeyer, Didier, Harald Bersee, and Adriaan Beukers. "Temperature Effect on Reinforced Thermoplastic Composite Properties for Primary Aircraft Structure Applications." In 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
16th AIAA/ASME/AHS Adaptive Structures Conference
10t. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2008. http://dx.doi.org/10.2514/6.2008-1938.
Звіти організацій з теми "Thermoplastic composite armors reinforced"
Naus, Dan J., James Corum, Lynn B. Klett, Mike Davenport, Rick Battiste, and Jr ,. William A. Simpson. Durability-Based Design Criteria for a Quasi-Isotropic Carbon-Fiber-Reinforced Thermoplastic Automotive Composite. Office of Scientific and Technical Information (OSTI), April 2006. http://dx.doi.org/10.2172/930728.
Повний текст джерела(Archived), Irina Ward, and Farah Abu Saleh. PR-473-144506-R01 State of the Art Alternatives to Steel Pipelines. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), December 2017. http://dx.doi.org/10.55274/r0011459.
Повний текст джерела