Дисертації з теми "Thermoeconomic analysi"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-23 дисертацій для дослідження на тему "Thermoeconomic analysi".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Ferreira, S. B. "Thermoeconomic analysis and optimisation of biomass fuel gas turbines." Thesis, Cranfield University, 2002. http://hdl.handle.net/1826/3423.
Повний текст джерелаSpelling, James. "Hybrid Solar Gas-Turbine Power Plants : A Thermoeconomic Analysis." Doctoral thesis, KTH, Kraft- och värmeteknologi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-121315.
Повний текст джерелаHållbar energiförsörjning är för närvarande en av de viktigaste frågorna förmänskligheten. Koncentrerad solenergi är nu etablerad som en tillförlitlig källaav förnybar energi. Den reglerbara karaktären hos tekniken gör den specielltintressant för uppbyggnaden av ett framtida koldioxidsnålt elsystem.Kostnaden för elektricitet från nuvarande termiska solkraftverk är hög trottsflera decennier av utveckling. Ett genombrått på tekniknivå krävs för att drivaned kostnaderna. Sol-gasturbiner är ett av de mest lovande alternativen, somger en ökad verkningsgrad samtidigt som vattenkonsumtionen reducerasdrastiskt. Sol-gasturbintekniken gör det möjligt att blandköra solenergi ochandra bränslen för att möta efterfrågan vid alla tidpunkter, en attraktiv aspekt iförhållande till alternativa lösningar.Uppbyggnaden av första generationens kommersiella hybrida solgasturbinkraftverkförsvåras dock av bristen på etablerade och standardiseradekraftverkskonfigurationer. Dessa ger planeraren ett stort antal valmöjlighetersom underlag för beslutsfattande. Termoekonomiska studier har genomförtsför ett flertal olika kraftverkskonfigurationer, däribland kraftverk med enkelcykel, kombikraftverk samt möjligheten att utnyttja termisk energilagring.Pareto-optimala konfigurationer har identifierats med hjälp av multiobjektsoptimeringför att belysa balansen mellan kostnader och utsläpp.Analysen av det enkla hybrida sol-gasturbinkraftverket visade attelektricitetskostnaden hållits på en låg nivå, men att den möjliga minskningen avkoldioxidutsläpp är relativt liten. Dessutom identifierades en inre balans mellanatt bibehålla en hög verkningsgrad hos konfigurationen och en hög andelsolenergi i produktionen. Andelen av solenergi i gasturbinen överskred aldrig63% på årlig bas, även med optimerade kraftverkskonfigurationer.Två förbättringar föreslås för att övervinna begränsningarna hos kraftverk medenkel cykel: integration av termisk energilagring samt nyttjande avkombikraftverkskonfigurationer. Termisk energilagring tillåter en ökad andelsolenergi i driften och reducerar koldioxidutsläppen drastiskt, medan denytterligare cykeln hos kombikraftverket reducerar elektricitetskostnaden.Kombinationen av dessa förbättringar ger den bästa prestandan, med enreduktion av koldioxidutsläppen på upp till 34% och reducerade elektricitetskostnaderpå upp till 22% i jämförelse med andra kombinationer avkonventionella kraftverkskonfigurationer.
QC 20130503
Lamas, Wendell de Queiróz [UNESP]. "Análise termoeconômica de uma mini-estação de tratamento de esgoto com auto-suficiência energética." Universidade Estadual Paulista (UNESP), 2007. http://hdl.handle.net/11449/106407.
Повний текст джерелаConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Neste trabalho é desenvolvida uma metodologia para a alocação dos custos dos produtos por uma mini-estação de tratamento de esgotos, com vistas a realizar a análise da viabilidade econômica do investimento necessário para a sua implantação, inclusive caracterizando-a como a melhor escolha a ser adotada na solução de saneamento básico em zonas rurais e em regiões de limitado poder aquisitivo, além de que tem potencial energético face à sua capacidade de transformar em eletricidadea energia contida no biogás gerado. Essa metodologia á aplicada ao sistema instalado no campus de Guaratinguetá da Faculdade de Engenharia da Universidade Estadual Paulista, tendo sido estabelecidas as condições iniciais a partir da realidade vivida no campus e sendo relacionadas as características termodinâmicas do sistema, a partir do seu diagrama de processo. As características associadas ao diagrama de processo possibilitam construir o diagrama funcional termoeconômico do sistema e determinar as equações referentes às funções exergéticas desse sistema e os respectivos valores das exergias associados. Após esses cálculos, elabora-se um modelo estrutural para avaliar os custos de seus produtos (biogás, biofertilizante, água em condições de re-uso e energia elétrica) e avaliar a viabilidade econômica em função do retorno de capital investido. A seguir, a mesma metodologia á aplicada a um sistema comercialmente disponível, com características de tratamento muito próximas às da mini-ETE. A partir dos resultados obtidos, é possível verificar que a mini-estação de tratamento de esgoto é uma alternativa viável e muito atraente sobre o ponto de vista técnico-econômico, pois além de apresentar auto-suficiência energética, possui um retorno de investimento de aproximadamente um terço do tempo do sistema comercialmente disponível com características semelhantes para tratamento.
In this work a methodology that allows for the allocation of costs of the generated products for a small wastewater treatment station is developed, and used to perform an analysis of its economic feasibility, to justify the investment, beside its characterization as one of the best choice to be adopted as a basic sanitation solution in rural areas, and in areas characterized by low income population, together with a major energy potential because of its capability to transform the generated biogas into electric energy. For this purpose, the methodology is applied to a system established at Guaratinguetá Campus, School of Engineering, São Paulo State University. After establishing initial conditions based on site evaluation, the thermodynamics features of the system are related based on its process diagram. Such features, associated to process diagram, make it possible to build the thermoeconomi functional diagram for the system under analysis and, after words, the equations related to exergetic functions for the system are determined and the exergy values are calculated. After these calculations, a structural model is developed, in order to provide its products costs (biogas, biofertilizer, water in reuse conditions and electric energy). The economic viability is evaluated as a function of the estimated return on investment. The same methodology is then applied to a commercially available system, with characteristics close to a small wastewater treatment station. Based on the results of this work it is possible to verify that the small wastewater treatment station is a viable and attractive alternative in the technical and economic point of view, showing self-sufficiency in energy, and a pay-back period about one-third of estimated time of the commercial system referred to with similar features.
OYEKALE, JOSEPH OYETOLA. "Modelling, thermoeconomic analysis and optimization of hybrid solar-biomass organic Rankine cycle power plants." Doctoral thesis, Università degli Studi di Cagliari, 2020. http://hdl.handle.net/11584/284453.
Повний текст джерелаLamas, Wendell de Queiróz. "Análise termoeconômica de uma mini-estação de tratamento de esgoto com auto-suficiência energética /." Guaratinguetá : [s.n.], 2007. http://hdl.handle.net/11449/106407.
Повний текст джерелаAbstract: In this work a methodology that allows for the allocation of costs of the generated products for a small wastewater treatment station is developed, and used to perform an analysis of its economic feasibility, to justify the investment, beside its characterization as one of the best choice to be adopted as a basic sanitation solution in rural areas, and in areas characterized by low income population, together with a major energy potential because of its capability to transform the generated biogas into electric energy. For this purpose, the methodology is applied to a system established at Guaratinguetá Campus, School of Engineering, São Paulo State University. After establishing initial conditions based on site evaluation, the thermodynamics features of the system are related based on its process diagram. Such features, associated to process diagram, make it possible to build the thermoeconomi functional diagram for the system under analysis and, after words, the equations related to exergetic functions for the system are determined and the exergy values are calculated. After these calculations, a structural model is developed, in order to provide its products costs (biogas, biofertilizer, water in reuse conditions and electric energy). The economic viability is evaluated as a function of the estimated return on investment. The same methodology is then applied to a commercially available system, with characteristics close to a small wastewater treatment station. Based on the results of this work it is possible to verify that the small wastewater treatment station is a viable and attractive alternative in the technical and economic point of view, showing self-sufficiency in energy, and a pay-back period about one-third of estimated time of the commercial system referred to with similar features.
Orientador: José Luz Silveira
Coorientador: Giorgio Eugenio Oscare Giacaglia
Banca: Luiz Octavio Mattos dos Reis
Banca: Joaquim Antonio dos Reis
Banca: José Rui Camargo
Banca: Sebastião Cardoso
Doutor
Alsagri, Ali Sulaiman. "Thermoeconomic and Optimization Analysis of Advanced Supercritical Carbon Dioxide Power Cycles in Concentrated Solar Power Application." University of Dayton / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1528816504089412.
Повний текст джерелаBalciunas, Dominykas. "Thermoeconomic analysis of LNG physical exergy use for electricity production in small-scale satellite regasification stations." Thesis, Högskolan i Gävle, Energisystem och byggnadsteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-30797.
Повний текст джерелаRoland, von Spakovsky Michael. "A practical generalized analysis approach to the optimal thermoeconomic design and improvement of real-world thermal systems." Diss., Georgia Institute of Technology, 1986. http://hdl.handle.net/1853/16459.
Повний текст джерелаColpan, Can Ozgur. "Exergy Analysis Of Combined Cycle Cogeneration Systems." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12605993/index.pdf.
Повний текст джерелаSandoz, Raphael. "Thermoeconomic Analysis and Optimisation of Air-Based Bottoming Cycles for Water-Free Hybrid Solar Gas-Turbine Power Plants." Thesis, KTH, Kraft- och värmeteknologi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-103906.
Повний текст джерелаArsalis, Alexandros. "Thermoeconomic Modeling and Parametric Study of Hybrid Solid Oxide Fuel Cell – Gas Turbine – Steam Turbine Power Plants Ranging from 1.5 MWe to 10 MWe." Thesis, Virginia Tech, 2007. http://hdl.handle.net/10919/31005.
Повний текст джерелаMaster of Science
Stroud, Matthew. "Solar Desalination in the Southwest United States: A Thermoeconomic Analysis Utilizing the Sun to Desalt Water in High Irradiance Regions." Thesis, The University of Arizona, 2012. http://hdl.handle.net/10150/232451.
Повний текст джерелаDogan, Osman Tufan. "Performance Of Combined Cycle Power Plants With External Combustion." Thesis, METU, 2003. http://etd.lib.metu.edu.tr/upload/1223288/index.pdf.
Повний текст джерелаCARNEIRO, MARIA LUISA NERYS DE MORAES. "ENVIRONMENTAL AND THERMOECONOMIC ANALYSIS OF A WASTE-TO-ENERGY FACILITY: CASE STUDY OF ZABALGARBI/BILBAO PLANT ADAPTED TO THE BRAZILIAN REALITY." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2015. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=26682@1.
Повний текст джерелаA disposição final de resíduos sólidos urbanos, em aterros ou lixões, é um problema das grandes cidades. A utilização do lixo urbano em processos de tratamento térmico com recuperação energética vem ao encontro da busca de fontes alternativas, preferencialmente as renováveis, para a geração de energia. Assim, usinas de incineração com reaproveitamento de energia vêm sendo apresentadas como uma solução tanto para o destino do lixo quanto para a diversificação da matriz energética. Além disso, a prática da incineração proporciona máxima redução da massa e volume e inertização do lixo, estando o aproveitamento energético de resíduos (Waste-to-Energy) dentre as alternativas mais coerentes para a gestão de resíduos sólidos municipais. No Brasil, práticas como esta ainda são incipientes, porém apresentam grande potencial de estudo para aplicações nos centros urbanos em um futuro próximo. O presente trabalho apresenta uma proposta de uma usina lixo-energia, aplicável ao município do Rio de Janeiro, baseada na planta de Zabalgarbi/Bilbao (Espanha), que funciona em ciclo combinado a gás natural e incinera resíduos, aproveitando seu conteúdo energético para produzir eletricidade. Uma análise energética e exergética é realizada juntamente com uma estimativa do custo de geração de eletricidade, influenciada por um indicador de ecoeficiência que leva em consideração as emissões atmosféricas. Como conclusão, mostra-se a capacidade do sistema proposto em destinar os resíduos sólidos urbanos e atender a demanda elétrica do município do Rio de Janeiro/Brasil a um custo competitivo.
The final disposal of municipal solid waste in landfills or dumps is a regular problem to the big cities. The use of municipal waste in processes of thermal treatment with energy recovery meets the search for alternative and renewable sources of energy production. Thus, energy recovery incineration facilities are being presented as a solution to both the waste disposal problem and the growing energy demand in the cities. Additionally, incineration provides the maximum reduction of mass, volume and dangerousness of the waste and the waste-to-energy practice stands out among the most coherent alternatives for municipal solid waste management in the world. In Brazil, however, it is still incipient and therefore presents a great potential for feasibility and application studies in the urban centers. This work presents a proposal of a waste-to-energy facility that could operate in the city of Rio de Janeiro (Brazil), based on the Zabalgarbi/Bilbao (Spain) plant, which operates in combined cycle fueled by natural gas and urban solid waste and generates electrical power. It is performed an energetic and exergetic analysis along with a cost estimate influenced by an eco-efficiency indicator that takes into account the air pollution emissions. The conclusion shows the capacity of the proposed facility to treat the municipal solid waste of Rio de Janeiro (Brazil) and supply its electricity demand with a competitive cost.
Rey, José Ramón Copa. "Avaliação técnico-econômica da incorporação de ciclos combinados associados à gaseificadores de leito fluidizado circulante no setor sucroalcooleiro." Universidade Estadual Paulista (UNESP), 2018. http://hdl.handle.net/11449/155989.
Повний текст джерелаApproved for entry into archive by Pamella Benevides Gonçalves null (pamella@feg.unesp.br) on 2018-09-14T12:35:08Z (GMT) No. of bitstreams: 1 coparey_jr_dr_guara.pdf: 5579664 bytes, checksum: 29f9e65ff72c472b08614891d5361d0e (MD5)
Made available in DSpace on 2018-09-14T12:35:08Z (GMT). No. of bitstreams: 1 coparey_jr_dr_guara.pdf: 5579664 bytes, checksum: 29f9e65ff72c472b08614891d5361d0e (MD5) Previous issue date: 2018-08-03
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
O bagaço e a palha são resíduos do processamento industrial da cana-de-açúcar que constituem uma importante fonte de recurso para cogeração de energia no setor sucroalcooleiro. Os sistemas de cogeração neste setor geram potência mecânica ou elétrica e vapor, que são utilizados no próprio processo e o excedente é vendido as concessionárias de energia. Porém, estes sistemas encontram-se bem abaixo do potencial real. Uma alternativa tecnológica que poderá contribuir com a oferta de excedentes de energia elétrica é a introdução da tecnologia BIG-GT (gaseificadores de biomassa associados a turbina a gás e caldeira de recuperação). O presente trabalho, tem como objetivo o estudo termoeconômico da incorporação desta tecnologia em usinas sucroalcooleiras como alternativa para o aumento de geração de eletricidade. As análises energéticas e exergéticas foram realizadas para quatro possíveis configurações de uma usina sucroalcooleira com a integração da tecnologia BIG-GT com o objetivo de avaliar a eficiência de geração de eletricidade e vapor de processo, bem como o aproveitamento global de energia de cada uma delas. Na análise termoeconômica, é determinado o custo de produção de gás de gaseificação, eletricidade e vapor do processo no sistema proposto, assim como, tempo de recuperação do investimento. Na parte final do trabalho foi realizada a otimização multiobjetiva do sistema considerando três funções objetivo: tecnológica, econômica e ambiental, para identificar a configuração com melhor comportamento. De acordo com os resultados obtidos no estudo conclui-se que o caso III que estuda a gaseificação em leito fluidizado circulante pressurizado e mistura de oxigênio-vapor de gaseificação e o caso IV que além da gaseificação em leito fluidizado circulante pressurizado com mistura de oxigênio-vapor estuda a queima suplementar de palha na caldeira de recuperação, apresentam-se como as melhores das opções propostas.
Bagasse and straw are residues from the industrial processing of sugarcane that constitute an important source for cogeneration of energy in the sugar-alcohol sector. The cogeneration systems in this sector generate mechanical or electrical power and steam, which are used in the process itself and the surplus is sold to energy distribution companies. However, these systems are well below real potential. One of the technological alternatives that may improve the supply of surplus electricity is the introduction of BIG-GT technology (biomass gasifier associated with gas turbine and Heat recovery steam generator). In this work, it is proposed to conduct thermoeconomic studies of the incorporation of this technology in the sugarcane ethanol plants as an alternative to increasing the supply of electricity generation. The energetic and exergetic analyses were performed for four possible configurations of a sugarcane ethanol plant with the integration of BIG-GT technology with the objective of evaluating the efficiency of electricity generation and process steam as well as the global energy utilization of each one of them. In the thermoeconomic analysis, it is determined the cost of production of producer gas, electricity and steam of the process in the proposed system, as well as the investment payback period. In the final part of the work, it is developed the multiobjective optimization of the system considering three objective functions: technological, thermoeconomic and environmental, for identifying the configuration with better behavior. According to the results obtained in the study, it is concluded that case III and case IV are presented as the best of the proposed options.
1450304
Coss, Stefano. "Advanced methods for sustainable energy systems in operation and design of district heating networks." Thesis, Ecole nationale supérieure Mines-Télécom Atlantique Bretagne Pays de la Loire, 2018. http://www.theses.fr/2018IMTA0090/document.
Повний текст джерелаDistrict heating networks (DHN) arean efficient way of providing thermal energy to consumers. Current state of the art shows that DHNs are developing towards smart thermal networks in integrated energy systems while their design is based upon the principles of sustainability. Based on that, this thesis covers two main research areas: Operation and design of district heating systems. In part A of this thesis, advanced methods for DHN operation are developed with the help of exergetic and thermoeconomic analysis. This includes the formulation of exergetic cost balances for graph-based network models. Intrinsic part is the deployment of an algebraic matrix, which determines the exergetic costs for dynamic system modeling. A case study of areal-existing network provides evidence that the proposed methodology offers new insights into individual allocation of costs which helps to assess the feasibility of third-party integration and the integration of distributed energy sources. In part B of this thesis, a new indicator called “load deviation index (LDI)” is proposed to link demand side measures (DSM) with the sustainable design of DHN systems. For that, abusiness-focused design frameworks proposed which takes the critical influences of DHN into account while avoiding a too high detail. DSM behavior is analyzed from a system perspective and its impact on DHN design is studied in two case studies. While one focuses on benchmarks for different design options using a multi-criteria sustainability metric, another gives detailed insights into the usefulness of the proposed framework for design purposes through assessing the impact of DSM on possible design improvements using a multi-objective optimization approach
Gebreslassie, Berhane Hagos. "Optimization of environmentally friendly solar assisted absorption cooling systems." Doctoral thesis, Universitat Rovira i Virgili, 2010. http://hdl.handle.net/10803/8499.
Повний текст джерелаOptimizations of energy conversion systems become more important because of their environmental impact and the limitations of the fossil fuel resources. Among these systems cooling and refrigeration machines have an increasing share in the total energy consumption and contribution to CO2 emissions. Solar assisted absorption cooling systems are sustainable alternatives compared to the conventional cooling systems. Hence, this work is focused on improving the sustainability of cooling systems following the thermoeconomic optimization and mathematical programming approaches. In the first approach the energy, exergy and structural analysis are performed for different configurations of water/LiBr and ammonia/water absorption cooling cycles. In the second approach multi-objective optimization (Pareto frontier), optimization under uncertainty of energy prices, different environmental impact indicators, and the effect of CO2 emissions tax to reduce the global warming are discussed. The results of the multi-objective optimization show that a significant environmental impact reduction can be obtained. Results indicate that these systems are attractive not only to reduce the environmental impact but also in incurring the economic benefits. However, its practical impact largely depends on the CO2 emissions tax and the increase in the energy price.
Ehtiwesh, Ismael Alagili Sassi. "Exergetic, energetic, economic and environmental evaluation of concentrated solar power plants in Libya." Doctoral thesis, Universidade de Aveiro, 2016. http://hdl.handle.net/10773/15882.
Повний текст джерелаThe PhD project addresses the potential of using concentrating solar power (CSP) plants as a viable alternative energy producing system in Libya. Exergetic, energetic, economic and environmental analyses are carried out for a particular type of CSP plants. The study, although it aims a particular type of CSP plant – 50 MW parabolic trough-CSP plant, it is sufficiently general to be applied to other configurations. The novelty of the study, in addition to modeling and analyzing the selected configuration, lies in the use of a state-of-the-art exergetic analysis combined with the Life Cycle Assessment (LCA). The modeling and simulation of the plant is carried out in chapter three and they are conducted into two parts, namely: power cycle and solar field. The computer model developed for the analysis of the plant is based on algebraic equations describing the power cycle and the solar field. The model was solved using the Engineering Equation Solver (EES) software; and is designed to define the properties at each state point of the plant and then, sequentially, to determine energy, efficiency and irreversibility for each component. The developed model has the potential of using in the preliminary design of CSPs and, in particular, for the configuration of the solar field based on existing commercial plants. Moreover, it has the ability of analyzing the energetic, economic and environmental feasibility of using CSPs in different regions of the world, which is illustrated for the Libyan region in this study. The overall feasibility scenario is completed through an hourly analysis on an annual basis in chapter Four. This analysis allows the comparison of different systems and, eventually, a particular selection, and it includes both the economic and energetic components using the “greenius” software. The analysis also examined the impact of project financing and incentives on the cost of energy. The main technological finding of this analysis is higher performance and lower levelized cost of electricity (LCE) for Libya as compared to Southern Europe (Spain). Therefore, Libya has the potential of becoming attractive for the establishment of CSPs in its territory and, in this way, to facilitate the target of several European initiatives that aim to import electricity generated by renewable sources from North African and Middle East countries. The analysis is presented a brief review of the current cost of energy and the potential of reducing the cost from parabolic trough- CSP plant. Exergetic and environmental life cycle assessment analyses are conducted for the selected plant in chapter Five; the objectives are 1) to assess the environmental impact and cost, in terms of exergy of the life cycle of the plant; 2) to find out the points of weakness in terms of irreversibility of the process; and 3) to verify whether solar power plants can reduce environmental impact and the cost of electricity generation by comparing them with fossil fuel plants, in particular, Natural Gas Combined Cycle (NGCC) plant and oil thermal power plant. The analysis also targets a thermoeconomic analysis using the specific exergy costing (SPECO) method to evaluate the level of the cost caused by exergy destruction. The main technological findings are that the most important contribution impact lies with the solar field, which reports a value of 79%; and the materials with the vi highest impact are: steel (47%), molten salt (25%) and synthetic oil (21%). The “Human Health” damage category presents the highest impact (69%) followed by the “Resource” damage category (24%). In addition, the highest exergy demand is linked to the steel (47%); and there is a considerable exergetic demand related to the molten salt and synthetic oil with values of 25% and 19%, respectively. Finally, in the comparison with fossil fuel power plants (NGCC and Oil), the CSP plant presents the lowest environmental impact, while the worst environmental performance is reported to the oil power plant followed by NGCC plant. The solar field presents the largest value of cost rate, where the boiler is a component with the highest cost rate among the power cycle components. The thermal storage allows the CSP plants to overcome solar irradiation transients, to respond to electricity demand independent of weather conditions, and to extend electricity production beyond the availability of daylight. Numerical analysis of the thermal transient response of a thermocline storage tank is carried out for the charging phase. The system of equations describing the numerical model is solved by using time-implicit and space-backward finite differences and which encoded within the Matlab environment. The analysis presented the following findings: the predictions agree well with the experiments for the time evolution of the thermocline region, particularly for the regions away from the top-inlet. The deviations observed in the near-region of the inlet are most likely due to the high-level of turbulence in this region due to the localized level of mixing resulting; a simple analytical model to take into consideration this increased turbulence level was developed and it leads to some improvement of the predictions; this approach requires practically no additional computational effort and it relates the effective thermal diffusivity to the mean effective velocity of the fluid at each particular height of the system. Altogether the study indicates that the selected parabolic trough-CSP plant has the edge over alternative competing technologies for locations where DNI is high and where land usage is not an issue, such as the shoreline of Libya.
O projeto de Doutoramento aborda o potencial de usar centrais de energia solar concentrada (CSP) como um sistema de produção de energia alternativa disponível na Líbia. Uma análise nas vertentes exergética, energética, económica e ambiental foi realizada para um tipo particular destas centrais – um sistema de 50 MW com receção parabólica, porém ela é suficientemente geral para ser aplicada a outras configurações. A originalidade do estudo, para além da modelação e análise da configuração selecionada encontra-se na utilização do estado da arte em termos da análise exergética combinada com a avaliação do ciclo de vida (LCA). A modelação e simulação da central CSP selecionada são efetuadas no terceiro capítulo tendo em consideração as duas componentes: ciclo de potência e campo de coletores solar. O modelo computacional para a análise do sistema foi desenvolvido com base em equações algébricas que descrevem o sistema, e que são resolvidas usando o software EES. Deste modo, são definidas as propriedades em cada ponto de interesse para os diferentes elementos do sistema, o que assim permite determinar as energias, eficiências e irreversibilidades desses elementos. O modelo desenvolvido tem o potencial de se tornar uma ferramenta de grande utilidade para o projeto preliminar de engenharia de centrais CSP, e também para a avaliação da eventual reconfiguração de centrais elétricas solares comerciais em operação. Além disso, o modelo pode ser utilizado no estudo de viabilidade da operação de centrais CSP, através da análise energética, económica e ambiental, para regiões diferentes da que foi escolhida no presente estudo -Trípoli (Líbia). O cenário total da viabilidade da operação da central CSP é completado através da análise horária com base anual apresentada no quarto capítulo. Esta análise permite a comparação de diferentes sistemas e, eventualmente permite fazer a seleção com base nas componentes económicas e energéticas, que são determinadas dentro do contexto do software greenius. A análise também toma em conta o impacto de financiamento e incentivos dados aos projetos no custo da produção de energia. O principal resultado desta análise é a verificação que o desempenho é mais elevado, com o consequente menor custo nivelado da eletricidade, para a Líbia em comparação com o Sul da Europa (Espanha). Assim a Líbia tem o potencial de se tornar um candidato atrativo para o estabelecimento de centrais CSP com o objetivo, como foi considerado em várias iniciativas europeias, de exportar eletricidade gerada através de fontes de energia renováveis de países do Norte de África e Médio Oriente para a Europa. A análise apresenta uma breve revisão do custo corrente da eletricidade e o potencial para reduzir o custo da energia a partir da tecnologia de receção parabólica de centrais CSP. A avaliação do ciclo de vida com base exergética (ELCA) e a avaliação do ciclo de vida convencional são realizadas para a centrais CSP específicas no quinto capítulo. Os objetivos são 1) avaliar o impacto ambiental e custo, em termos de do ciclo iv de vida exergético do sistema; 2) identificar pontos fracos em termos da irreversibilidade dos processos; e 3) verificar se as centrais CSP podem reduzir o impacto ambiental e o custo de geração de eletricidade em comparação com centrais que consomem combustível fóssil. O capítulo ainda apresenta uma análise termoeconómica com base na metodologia do custo específico da exergia (SPECO), que avalia o custo relacionado com a destruição de exergia. A análise verificou que o impacto mais importante é a contribuição apresentada pelo campo solar (79%), e os materiais com maior impacto são: aço (47%), sal fundido (25%) e óleo sintético (21%). A análise ELCA mostra que a maior demanda de exergia é devida ao aço (47%); a análise existe uma considerável demanda de exergia relacionada com o sal fundido e ainda o óleo sintético. Em comparação com as centrais que consomem combustível fóssil (NGCC e óleo) a central sistema CSP apresenta menor impacto ambiental, enquanto o pior desempenho ambiental é o da central com queima de óleo seguida pela central a gás natural (NGCC). Na central CSP, o campo solar apresenta o custo mais elevado, enquanto o gerador de vapor, entre os componentes do ciclo de potência, apresenta o maior custo. O armazenamento de energia térmica permite que as centrais CSP superem a intermitência de radiação solar para responder à procura de energia elétrica independentemente das condições climáticas, e também possam estender a produção de eletricidade para além da disponibilidade da radiação solar diária. A análise numérica do transiente térmico de um sistema de armazenamento de gradiente térmico é realizada durante a fase de carregamento. O sistema de equações que descreve o modelo numérico é resolvido através da utilização de diferenças finitas implícitas no tempo usando o software Matlab. Os resultados da análise indicam que as previsões estão em boa concordância com os dados experimentais para a evolução no tempo da região de gradiente térmico, em particular para regiões mais afastadas da entrada. Nesta região os desvios observados são provavelmente causados pelo alto nível de turbulência devido à penetração do jato no seio do tanque de armazenamento. O modelo analítico simples para simular a turbulência que foi desenvolvido melhora os resultados. Esta abordagem não requer esforço computacional adicional e determina a difusidade térmica efetiva ao longo do tanque.
Le, Van Long. "Étude de la faisabilité des cycles sous-critiques et supercritiques de Rankine pour la valorisation de rejets thermiques." Thesis, Université de Lorraine, 2014. http://www.theses.fr/2014LORR0117/document.
Повний текст джерелаThis thesis concerns the feasibility study of subcritical and supercritical organic Rankine cycles for industrial waste heat recovery at relatively low temperature. Initially, a state of the art of ORCs (Organic Rankine Cycles) and their working fluids has been achieved. We conducted a preliminary comparison of several configurations from the scientific literature. In a second step, methods of energy and exergy analysis were applied to evaluate and optimize the performance of the ORCs. Indeed, sole energy analysis is not enough to access the proper use of the energy potential of the available heat source that corresponds to an industrial waste heat. Exergy analysis, in a complementary way to the energy analysis, enables us to locate the energy resources losses in the various components of the system and to determine their true magnitude and their causes. A thermo-economic optimization of waste heat recovery systems using a subcritical or supercritical Rankine cycle has been performed. According to the results, the industrial waste heat recovery at low temperature (e.g. heat source 150 ° C) using a subcritical ORC is more interesting on economic point of view than the system using a supercritical Rankine cycle
chi, wu sheng, and 吳勝琪. "Thermoeconomic Analysis of LNG Cold Energy." Thesis, 1998. http://ndltd.ncl.edu.tw/handle/64425806325371243218.
Повний текст джерелаLin, Zhi-Qian, and 林志謙. "Thermodynamic Analysis and Thermoeconomic Optimization of a LiBr Absorption Chiller." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/g76f38.
Повний текст джерела國立臺北科技大學
化學工程研究所
99
This study presents the thermodynamic analysis and thermoeconomic optimization of a lithium bromide (LiBr) absorption chiller. The mathematical model of a LiBr absorption chiller is first established based on mass balance relations, energy balance relations, and some constitutive equations of each heat exchanger unit. Then, this study analyzes the thermodynamic properties of the absorption chiller, and calculates the irreversibility and energy loss of each unit. Simulations of the absorption chiller are carried out to investigate the effects of various operating conditions on the coefficient of performance (COP) and exergy efficiency (Ψex) of the absorption chiller. Moreover, this study presents the optimum design of the absorption chiller using a thermoeconomic optimization method, known as the structural method. This method not only takes the thermodynamic considerations into account but also considers their economic optimization. The advantage of using the structural method for thermoeconomic optimization is that the various elements of the system can be optimized on their own. A simple equation to calculate the optimum area of each heat exchanger can be derived by introducing the structural coefficient bond (CSB), and a modified optimization procedure is proposed. Simulation results show that the total cost and COP are improved after the optimization, while the improvement of exergy efficiency depends on the operation time.
Wang, Tzu-Wen, and 王子文. "The Second-Law Efficiency and Thermoeconomic Analysis of LNG Cold Energy Transmission." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/55740581650052964937.
Повний текст джерела國立中山大學
機械工程學系研究所
89
Natural gas has been considered a clean energy which is more environmental friendly and with higher combustion efficiency. In Taiwan, most LNG was imported from abroad, with large amount of cold energy for application, despite the fact that it has been utilized for only 8% of total. In LNG cold energy utilization process, the change of exergy can be simulated with the second law of Thermodynamics as a means to analyze its energy efficiency. Especially, when the transportation distance is long, the optimal insulation thickness can then be calculated to justify its economic feasibility. In this study, thermoeconomics was applied to analyze the feasibility of LNG cold energy recovery, which warrants it as a powerful design tool in engineering applications.
Liao, Ke-Yang, and 廖克陽. "Exergy and thermoeconomic analysis and multi-objective optimization of air conditioning system of an underground train station." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/rj4jq7.
Повний текст джерела國立臺北科技大學
能源與冷凍空調工程系碩士班
104
Most research on exergy and thermoeconomic of air-conditioning system were for simple systems at fixed state conditions. There has been no research found on exergy, thermoeconomic and optimization of air-conditioning system for an underground station in operation. Underground train stations are important features in modern metropolitans.The necessity of air-conditioning system causes enormous energy use for underground train stations, especially on that situated in a subtropical region like Taiwan. Therefore, exergy analysis and thermoeconomic analysis, and multi-objective optimization are applied to the annual operation of the air-conditioning system of a large underground train station in Taiwan. Exergy analysis is used to indicate both the quality and the quantity in the energy conversion. Exergy destruction in reverse is the indicator of energy loss in terms of quality and quantity. The current operation of the air-conditioning system and the monitored data are taken to be the base case which is then compared to cases of cost consideration (CC), thermodynamic efficiency (TE) and to multiple-objective of efficiency and economics (MO). Total revenue requirement levelized cost rate and total exergy destruction rate are used to evaluate the merits. The results show that cost optimization objective would obtain lower total revenue requirement levelized cost rate, but at the expense of higher total exergy destruction rate. Optimization of thermodynamic efficiency however leads to lower total exergy destruction rate but would increase the total revenue requirement levelized cost rate significantly. It has been shown that multi-objective optimization would result a small marginal increase in total revenue requirement levelized cost rate but achieve a significantly lower total exergy destruction rate. This study of multi-objective optimization uses the normalized form of the Pareto optimal frontier. Results of four cases in terms of normalized total revenue requirement levelized cost rate and normalized total exergy destruction rate are presented. The multi-objective optimization was represented as the lowest point of the root mean squares of and . For Case MO optimal was obtained at about 0.26 and at about 0.27. It shows that better cost benefits can be obtained when is lower than 0.26, and better thermodynamics when is higher than 0.26. It has been also shown second law analysis when applied to underground train stations, lower annual energy use and lower CO2 emission can be achieved. The research results show the importance of exergy thermoeconomic analysis, and multi-objective optimization. It can be applied to the design, evaluation and comprehensive planning of a large size underground train station air-conditioning system. Results of this study may also provide an important reference of both energy-saving and construction cost consideration for future construction or renovation of underground stations air-conditioning system.