Добірка наукової літератури з теми "Thermo-hydraulic efficiency"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Thermo-hydraulic efficiency".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Thermo-hydraulic efficiency"
Smirnov, V. V., Yu V. Yavorovsky, V. V. Sennikov, and D. O. Romanov. "Comparative analysis of the efficiency of the application of thermal-hydraulic distributor with classical schemes of connecting subscribers." Vestnik IGEU, no. 3 (2019): 5–13. http://dx.doi.org/10.17588/2072-2672.2019.3.005-013.
Повний текст джерелаKetelsen, Søren, Sebastian Michel, Torben O. Andersen, Morten Kjeld Ebbesen, Jürgen Weber, and Lasse Schmidt. "Thermo-Hydraulic Modelling and Experimental Validation of an Electro-Hydraulic Compact Drive." Energies 14, no. 9 (April 22, 2021): 2375. http://dx.doi.org/10.3390/en14092375.
Повний текст джерелаBhatter, Rahul Kumar, Ali Abbas, and Anant Kumar Rai. "Effect of Baffles Position on Thermo-Hydraulic Efficiency of a Solar Air Heater." IOP Conference Series: Materials Science and Engineering 1132, no. 1 (April 1, 2021): 012041. http://dx.doi.org/10.1088/1757-899x/1132/1/012041.
Повний текст джерелаAlam, Tabish, Md Irfanul Haque Siddiqui, Hassan Alshehri, Masood Ashraf Ali, Paolo Blecich, and Kushagra Saurabh. "Exergy-Based Thermo-Hydraulic Performance of Roughened Absorber in Solar Air Heater Duct." Applied Sciences 12, no. 3 (February 7, 2022): 1696. http://dx.doi.org/10.3390/app12031696.
Повний текст джерелаPugi, L., R. Conti, A. Rindi, and S. Rossin. "A Thermo-Hydraulic Tool for Automatic Virtual Hazop Evaluation." Metrology and Measurement Systems 21, no. 4 (December 1, 2014): 631–48. http://dx.doi.org/10.2478/mms-2014-0055.
Повний текст джерелаZhou, Aizhao, Xianwen Huang, Wei Wang, Pengming Jiang, and Xinwei Li. "Thermo-Hydraulic Performance of U-Tube Borehole Heat Exchanger with Different Cross-Sections." Sustainability 13, no. 6 (March 16, 2021): 3255. http://dx.doi.org/10.3390/su13063255.
Повний текст джерелаAlam, Tabish, Chandan Swaroop Meena, Nagesh Babu Balam, Ashok Kumar, and Raffaello Cozzolino. "Thermo-Hydraulic Performance Characteristics and Optimization of Protrusion Rib Roughness in Solar Air Heater." Energies 14, no. 11 (May 28, 2021): 3159. http://dx.doi.org/10.3390/en14113159.
Повний текст джерелаSingh, Niranjan Ramendra, Singh Onkar, and Janakarajan Ramkumar. "Thermo-Hydraulic Performance of Square Micro Pin Fins under Forced Convection." International Journal of Heat and Technology 39, no. 1 (February 28, 2021): 170–78. http://dx.doi.org/10.18280/ijht.390118.
Повний текст джерелаBorek, Kinga. "Influence of liquid-nitrogen freezing of gas-bearing shale rocks on their compressive strength." Mineralogia 49, no. 1-4 (December 1, 2018): 7–16. http://dx.doi.org/10.2478/mipo-2018-0002.
Повний текст джерелаBarreto, Germilly, Paulo Canhoto, and Manuel Collares-Pereira. "Effect of thickness on the thermo-hydraulic performance of porous volumetric solar receivers with different internal geometries." Journal of Physics: Conference Series 2116, no. 1 (November 1, 2021): 012116. http://dx.doi.org/10.1088/1742-6596/2116/1/012116.
Повний текст джерелаДисертації з теми "Thermo-hydraulic efficiency"
Мейріс, Антон Жанович. "Теплообмін та теплогідравлічна ефективність пучків труб з поверхневими заглибленнями". Thesis, Інститут технічної теплофізики НАН України, 2018. https://ela.kpi.ua/handle/123456789/38181.
Повний текст джерелаДисертація присвячена експериментальному та теоретичному дослідженню теплообміну та гідродинаміки при поперечному обтіканні одиночної труби та пучку труб із поверхневими заглибленнями. Теоретично досліджено теплообмін та гідродинаміку при поперечному обтіканні одиночної труби із поверхневими заглибленнями у формі усіченого конусу за допомогою комп’ютерного пакету ANSYS CFX. Проведено верифікацію моделей турбулентності. Наведено результати досліджень вихрової структури потоку, точки відриву потоку, зони зворотних течій, коефіцієнту лобового опору, коефіцієнту теплообміну. Проведено експериментальні та теоретичні дослідження теплообміну та гідродинаміки при поперечному обтіканні п’ятирядного пучку труб із поверхневими заглибленнями. Отримані дані щодо коефіцієнтів гідравлічного опору пучка та коефіцієнтів теплообміну по рядах та для пучка в цілому. Проведено верифікацію комп’ютерної моделі по експериментальним даним. Розроблено інженерну методику розрахунку рекуператора газотурбінної установки та проведено оцінку зниження його маси за рахунок нанесення заглиблень.
The dissertation is devoted to the experimental and theoretical study of heat transfer and hydrodynamics at the cross-flow of a single tube and a tube bundle with surface indentations. Heat transfer and hydrodynamics were studied theoretically at the cross-flow of a single tube with surface indentations in the form of a truncated cone using the ANSYS CFX computer package. Verification of turbulence models is carried out. The results of studies of the vortex structure of the flow, the point of separation of the flow, the zone of reverse flows, the coefficient of the frontal resistance, and the heat transfer coefficient are given. Experimental and theoretical investigations of heat transfer and hydrodynamics are carried out at the cross-flow of a five-row tube bundle with surface indentations. The data on the coefficients of the hydraulic resistance of the bundle and of the heat transfer coefficients for rows and for the whole bundle are obtained. Verification of the computer model by experimental data is carried out. An engineering method for calculation of the gas turbine plant recuperator was developed and an estimation of the decrease in its mass due to the application of depressions was made.
Тези доповідей конференцій з теми "Thermo-hydraulic efficiency"
Nakashima, Celso Y., Silvio Oliveira, and Elisio F. Caetano. "Thermo-Hydraulic Model of a Twin-Screw Multiphase Pump." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-60139.
Повний текст джерелаVirt, Vitaly, Vladimir Kosolapov, Vener Nagimov, Andrey Salamatin, Yulia Fesina, Anastasia Alekseeva, Yulia Yakhina, and Elizaveta Skutina. "Individual Fracture Efficiency Monitoring in Horizontal Wells by Using a New 3d Fine-Grid Temperature Modelling." In Abu Dhabi International Petroleum Exhibition & Conference. SPE, 2021. http://dx.doi.org/10.2118/207237-ms.
Повний текст джерелаKarlén, Niko, Tatiana Minav, and Matti Pietola. "Investigation of Thermal Effects in Direct Driven Hydraulic System for Off-Road Machinery." In 9th FPNI Ph.D. Symposium on Fluid Power. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/fpni2016-1512.
Повний текст джерелаLi, Bing, Samuel D. Marshall, Rerngchai Arayanarakool, Lakshmi Balasubramaniam, Poh Seng Lee, and Peter C. Y. Chen. "Study of Performance Impact by Thermo-Hydraulic Developing Entrance in Spiral Microchannel With CFD Analysis." In ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/mnhmt2016-6408.
Повний текст джерелаCheng, Jie, Yingwei Wu, G. H. Su, Suizheng Qiu, and Wenxi Tian. "Neutronics and Thermo-Hydraulic Analysis of Water-Cooled Blanket Based on PWR and SCWR Water Conditions for CFETR." In 2016 24th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/icone24-60392.
Повний текст джерелаPolanský, Jiří, and Roman Gášpár. "Optimization of the Thermodynamics Cycles of Generation IV Gas-Cooled Fast Reactors." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-64565.
Повний текст джерелаJohansen, Per, Daniel B. Roemer, Torben O. Andersen, and Henrik C. Pedersen. "Analysis of the Thermo-Viscous Effect on Friction and Energy Dissipation in Oil Lubricated Interfaces." In 9th FPNI Ph.D. Symposium on Fluid Power. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/fpni2016-1554.
Повний текст джерелаRiedel, Christian, Christian Stammen, and H. Murrenhoff. "Fundamentals of Mass Conservative System Simulation in Fluid Power." In ASME 2009 Dynamic Systems and Control Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/dscc2009-2639.
Повний текст джерелаNasrabadi, Mehdi, and Ramin Haghighi Khoshkhoo. "Design of Fin Plate Heat Exchanger for Increasing Micro Turbine Efficiency and Introduction of Fin Plate Heat Exchanger Design Software (KhoshNasr) for this Purpose." In ASME 2008 Heat Transfer Summer Conference collocated with the Fluids Engineering, Energy Sustainability, and 3rd Energy Nanotechnology Conferences. ASMEDC, 2008. http://dx.doi.org/10.1115/ht2008-56114.
Повний текст джерелаJohansen, Per, Daniel B. Roemer, Torben O. Andersen, and Henrik C. Pedersen. "Multibody Dynamics of a Fluid Power Radial Piston Motor Including Transient Hydrodynamic Pressure Models in Lubricating Gaps." In ASME/BATH 2013 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/fpmc2013-4462.
Повний текст джерела