Добірка наукової літератури з теми "Thermally active panels"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Thermally active panels".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Thermally active panels"
Kalús, Daniel, Mária Kurčová, Zuzana Straková, and Matej Kubica. "Thermaly Active Interior Panels with an Integrated Active Area." Slovak Journal of Civil Engineering 29, no. 1 (March 1, 2021): 42–47. http://dx.doi.org/10.2478/sjce-2021-0007.
Повний текст джерелаKalús, Daniel, Zuzana Straková, and Matej Kubica. "Parametric Study of Heating and Cooling Capacity of Interior Thermally Active Panels." Periodica Polytechnica Mechanical Engineering 65, no. 3 (July 5, 2021): 269–79. http://dx.doi.org/10.3311/ppme.17570.
Повний текст джерелаQuesada Allerhand, José, Ongun Berk Kazanci, and Bjarne W. Olesen. "Energy and thermal comfort performance evaluation of PCM ceiling panels for cooling a renovated office room." E3S Web of Conferences 111 (2019): 03020. http://dx.doi.org/10.1051/e3sconf/201911103020.
Повний текст джерелаSafin, Ruslan Rushanovich, Aigul Ravilevna Shaikhutdinova, Ruslan Khasanshin, Shamil Mukhametzyanov, and Albina Safina. "Increasing the Strength of the Glue Line in the Production of Thermally Modified Wood Paneling." Coatings 11, no. 2 (February 20, 2021): 253. http://dx.doi.org/10.3390/coatings11020253.
Повний текст джерелаBinar, Tomáš, Jiří Švarc, Stanislav Rolc, Petr Dostál, and Michal Šustr. "The Use of Resistant Glass in Special Agricultural Machinery and the Logistic Support Depending on Operating Temperatures." Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 65, no. 4 (2017): 1121–27. http://dx.doi.org/10.11118/actaun201765041121.
Повний текст джерелаKeskküla, Kadri, Tambet Aru, Mihkel Kiviste, and Martti-Jaan Miljan. "Hygrothermal Analysis of Masonry Wall with Reed Boards as Interior Insulation System." Energies 13, no. 20 (October 9, 2020): 5252. http://dx.doi.org/10.3390/en13205252.
Повний текст джерелаŠimko, Martin, Michal Krajčík, and Ondřej Šikula. "Radiant wall cooling with pipes arranged in insulation panels attached to facades of existing buildings." E3S Web of Conferences 111 (2019): 03013. http://dx.doi.org/10.1051/e3sconf/201911103013.
Повний текст джерелаKalús, Daniel, Daniela Koudelková, Veronika Mučková, Martin Sokol, and Mária Kurčová. "Contribution to the Research and Development of Innovative Building Components with Embedded Energy-Active Elements." Coatings 12, no. 7 (July 19, 2022): 1021. http://dx.doi.org/10.3390/coatings12071021.
Повний текст джерелаSun, Guo, and Yuan Gui Sun. "Thermal-Structural Analysis of Ni-Based Alloy Panel with Active Cooling Thermal Protection System." Applied Mechanics and Materials 644-650 (September 2014): 4718–21. http://dx.doi.org/10.4028/www.scientific.net/amm.644-650.4718.
Повний текст джерелаSimonova, O. S., A. O. Chulkov, V. P. Vavilov, and S. B. Suntsov. "Active thermal testing of hyperthermoconductive panels." Russian Journal of Nondestructive Testing 53, no. 6 (June 2017): 453–56. http://dx.doi.org/10.1134/s1061830917060080.
Повний текст джерелаДисертації з теми "Thermally active panels"
Jin-WeiGuo and 郭晉維. "The Heat Transfer and Thermal Stress Analysis of an Acting-type Heat Retention Panel and a Hot Blast Stove." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/27wha3.
Повний текст джерела國立成功大學
機械工程學系
107
In the steel process, production of molten iron and improvement of the mechanical properties of the strip steel have been a focus for a long time. Therefore, the numerical simulation was utilized to analyze the heat retention devices in hot strip rolling process and the hot blast stove used in iron making process. In the heat retention panel study, high temperature transfer bars are transported by conveyors through the heat retention panel in order to decrease the temperature difference between the head and the tail of the transfer bars. A three-dimensional numerical model of a traditional passive heat retention panel was developed to investigate the temperature difference between the head and the tail of the transfer bars. According to the simulation results, it was found that the temperature difference in the transfer bar at FET position between the numerical simulation and the in-situ data was about 1.53%. Based on the developed model, a three-dimensional numerical model of the acting-type heat retention panel was constructed in order to predict whether the temperature difference decreases during the heat retention process. According to the numerical results of the acting-type heat retention panel model, providing the heat fluxes on the upper surface of the radiation plate can effectively reduce the temperature difference. In the hot blast stove study, a three-dimensional finite element model was developed to investigate the thermal stress distribution. The numerical results showed that the maximum thermal stress of the refractories was about 25.0 MPa which occurred on the neck of checker chamber and combustion chamber, inner refractories of connection and blast pipes. The maximum thermal deformation about 249 mm occurred on the neck of checker chamber. The maximum thermal deformation on the dome of checker chamber and combustion chamber was about 77 mm and 72 mm, respectively. Furthermore, the shell can also generate stress and deformation because of the temperature difference.
Книги з теми "Thermally active panels"
Faddegon, Stephen, Ephrem O. Olweny, and Jeffrey A. Cadeddu. Ablative technologies for renal cancer. Edited by James W. F. Catto. Oxford University Press, 2017. http://dx.doi.org/10.1093/med/9780199659579.003.0087.
Повний текст джерелаЧастини книг з теми "Thermally active panels"
Mukherjee, Ragini, N. K. Gopinath, V. Vignesh, Anupam Purwar, and D. Roy Mahapatra. "Thermal Analysis of Scramjet Combustor Panel with Active Cooling Using Cellular Materials." In 30th International Symposium on Shock Waves 1, 239–44. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-46213-4_39.
Повний текст джерелаТези доповідей конференцій з теми "Thermally active panels"
Kelley, Leah, Amy M. Bilton, and Steven Dubowsky. "Enhancing the Performance of Photovoltaic Powered Reverse Osmosis Desalination Systems by Active Thermal Management." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-62717.
Повний текст джерелаSong, Hongwei, Mingjun Li, Chenguang Huang, and Xi Wang. "Thermal-Structural Design of Actively-Cooled Panels Reinforced by Light-Weight Truss Cores." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-63352.
Повний текст джерелаLamson, Joel A., and Stuart W. Baur. "Solar Thermal Electric Panel (STEP): Thermal and Energy Testing." In ASME 2008 2nd International Conference on Energy Sustainability collocated with the Heat Transfer, Fluids Engineering, and 3rd Energy Nanotechnology Conferences. ASMEDC, 2008. http://dx.doi.org/10.1115/es2008-54354.
Повний текст джерелаBalaban, Murat, Giovanna Ferrentino, Milena Ramirez, Maria L. Plaza, and Thelma Calix. "Review of Dense Phase Carbon Dioxide Application to Citrus Juices." In ASME 2008 Citrus Engineering Conference. American Society of Mechanical Engineers, 2008. http://dx.doi.org/10.1115/cec2008-5407.
Повний текст джерелаJiang, X., and S. Mahadevan. "An Intelligent Damage Detection System for Thermal Protection Panels with Active Sensors." In 11th Biennial ASCE Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments. Reston, VA: American Society of Civil Engineers, 2008. http://dx.doi.org/10.1061/40988(323)157.
Повний текст джерелаSchollenberger, Frederick S., Frank Kreith, and Jay Burch. "Geographical Limitations on Integral-Collector-Storage Collectors due to Collector Freeze." In ASME 2012 6th International Conference on Energy Sustainability collocated with the ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/es2012-91306.
Повний текст джерелаConrardy, C., T. D. Huang, D. Harwig, P. Dong, L. Kvidahl, N. Evans, and A. Treaster. "Practical Welding Techniques to Minimize Distortion in Lightweight Ship Structures." In SNAME Maritime Convention. SNAME, 2005. http://dx.doi.org/10.5957/smc-2005-p27.
Повний текст джерелаRakow, Joseph, and Anthony Waas. "Thermal Buckling of Metal Foam Sandwich Panels for Actively Cooled Thermal Protection Systems." In 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2004. http://dx.doi.org/10.2514/6.2004-1710.
Повний текст джерелаMcCarthy, Patrick T., Stephen L. Hodson, Timothy D. Sands, and Timothy S. Fisher. "Carbon Nanotube Interfaces for Magneto Thermoelectric Actuation." In 2010 14th International Heat Transfer Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ihtc14-22810.
Повний текст джерелаOh, Il-Kwon, and In Lee. "Aerothermoelastic Analysis of Cylindrical Piezolaminated Shells Using Multifield Layerwise Theory." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33621.
Повний текст джерела