Готові списки джерел за темами / Thermal field simulation

Добірка наукової літератури з теми "Thermal field simulation"

Автор: Grafiati
Опубліковано: 30 травня 2022
Оновлено: 31 травня 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Thermal field simulation".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Thermal field simulation"

1

Sýkorová, Libuše, Oldřich Šuba, and Jana Knedlova. "Laser Micro-Machining and Temperature Field Simulation." Key Engineering Materials 581 (October 2013): 322–25. http://dx.doi.org/10.4028/www.scientific.net/kem.581.322.

Повний текст джерела
Анотація:
The parametric thermal field analyses were realized by the finite element method. The analysis was run in the software solver COSMOS/DesignSTAR thermal. The thermal module makes possible to realize cases of the thermal dependences on the material properties. Material data can be entered as a function of the temperature. The thermal and physical characteristic of the polymeric materials are changed very expressively. The output of the analysis was temperature distribution described by various colors and assigned values in the spectrogram.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Rahadian, Erwin Yuniar, and Agung Prabowo Sulistiawan. "The Evaluation of Thermal Comfort using a BIM-based Thermal Bridge Simulation." Journal of Architectural Research and Education 1, no. 2 (January 1, 2020): 129. http://dx.doi.org/10.17509/jare.v1i2.22304.

Повний текст джерела
Анотація:
Global warming has become an important issue today, caused by the increasing demand for energy and humans lifestyle. To reduce the impact, more architects started to respond regarding environmental issues. The concept of green architecture promotes to solving this problem. Natural ventilation is the one of the concept green architecture. This research tends to look at the aspect of Thermal Comfort in naturally ventilated mosque buildings through the Thermal Bridges strategy. Naturally ventilated building tend to have better indoor air quality (IAQ), but worse thermal comfort. Therefore, this research investigates the range of acceptable temperature and calculate by BIM thermal bridge simulation to achieve thermal comfort for naturally ventilated mosque building. The method of analysis conducted is quantitative based on direct measurement of weather data and existing comfort conditions in the field, calculations, and simulations using Building Information Modeling (BIM). Data was collected through a field survey in Itenas Mosque Building and were used to develop and validate then using the BIM thermal bridge model for simulation. The data collected from field survey and in situ environmental measurement such as air temperature, relative humidity, and wind velocity. The thermal comfort prediction model was developed from statistical analysis of the field survey data. Based on the result of thermal Bridge simulation using BIM software required exchange material of the existing building to achieve thermal comfort. Keyword-Thermal comfort, Building Information Modelling, Thermal Bridge Simulation
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Chen, Xue Jun, and Qi Liu. "Simulation of Temperature Field and Thermal Stress Field during Laser Drilling." Applied Mechanics and Materials 217-219 (November 2012): 2226–29. http://dx.doi.org/10.4028/www.scientific.net/amm.217-219.2226.

Повний текст джерела
Анотація:
In this paper, the finite element simulation of laser drilling process has been carried out for the nickel alloy DD6. Both the transient temperature field and thermal stress field were computed via the commercial software package ANSYS. Based on the method of dimensional analysis, the dependence of various non-dimensional parameters on both fields was specified and demonstrated in graphical forms.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Wajnert, Dawid, and Bronisław Tomczuk. "Analysis of spatial thermal field in a magnetic bearing." Open Physics 16, no. 1 (March 20, 2018): 52–56. http://dx.doi.org/10.1515/phys-2018-0010.

Повний текст джерела
Анотація:
AbstractThis paper presents two mathematical models for temperature field analysis in a new hybrid magnetic bearing. Temperature distributions have been calculated using a three dimensional simulation and a two dimensional one. A physical model for temperature testing in the magnetic bearing has been developed. Some results obtained from computer simulations were compared with measurements.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Lu, De Sheng, Yu Zhou, Bei Wang, Yu Jin Wang, Jia Hu Ouyang, and Hua Ke. "Numerical Simulation of Thermal Stress Field of Arc-Shaped Thermal-Protection Component." Key Engineering Materials 353-358 (September 2007): 1110–13. http://dx.doi.org/10.4028/www.scientific.net/kem.353-358.1110.

Повний текст джерела
Анотація:
For the purpose of studying material cluster design and shape design of a certain arc-shaped thermal-protection component rationally, the ablation behavior and thermal stress distribution are studied by using the method of finite element numerical simulation. The study includes ablation tests, numerical simulation of temperature field, calculation of ablation thickness and numerical simulation of unsteady thermal stress field of the component. The simulation results are consistent with the results of ablation tests, which shows that the shape design of the arc-shaped thermal-protection component is rational and the dangerous periods of the component ablation are the time of initial heating and initial ablation boundary retreat.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Camus, P. P., D. J. Larson, and T. F. Kelly. "Simulation of rapid thermal pulsing for field evaporation." Applied Surface Science 67, no. 1-4 (April 1993): 467–72. http://dx.doi.org/10.1016/0169-4332(93)90354-e.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Codrean, C., B. Radu, D. Buzdugan, and C. Opriş. "Simulation of Thermal Field in Bulk Amorphous Steels." IOP Conference Series: Materials Science and Engineering 416 (October 26, 2018): 012021. http://dx.doi.org/10.1088/1757-899x/416/1/012021.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Dai, Huaren, Zhe Chen, Wei Guo, and Ju Wang. "Thermal simulation model of aero-engine blade material forging simulation." Thermal Science 25, no. 4 Part B (2021): 3169–77. http://dx.doi.org/10.2298/tsci2104169d.

Повний текст джерела
Анотація:
During the high temperature forging process, the thermal parameters such as the temperature field and strain field in the blank have an important influence on the crack damage and micro-structure in the forging. We use the rigid viscoelastic finite element method to carry out the forging process of a heavy aero-engine blade the finite element numerical simulation was carried out to obtain the temperature field, strain field and forging load change law in the forging process with time, and on this basis, combined with the crack damage and repair mechanism and the re?crystallization structure evolution law, an optimization was proposed. The forging process plan. That is, the pre-forging is performed on the basis of the tolerance of the final forging dimension under pressure of 4 mm, the pre-forging temperature is 1160?C, and the final forging temperature is 1120?C. The actual forging process test verifies the feasibility of the process plan, which is the engineering of this process the application lays the scientific foundation.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Li, Yan Feng, Jian Song, Shao Hui Liu, and Xian Chun Song. "Temperature Field Simulation of Ballscrew Whirlwind Milling." Advanced Materials Research 591-593 (November 2012): 588–92. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.588.

Повний текст джерела
Анотація:
Ball screw is the key parts of NC machine, precise instrument and many kinds of mechanical devices. Whirlwind milling is a new and effective thread manufacture technology. This article studies the internal heat conduction equation of whirlwind milling ball screw based on Heat Transfer, calculates ANSYS simulation result. The simulation results show that the surface temperature distribution rule and internal temperature distribution rule of a ballscrew is consistent. The article analyzes the influence factors of the thermal elongation. It provides a basis for compensating the thermal deformation error of whirlwind milling ballscrew.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Drahoš, Peter, Vladimír Kutiš, and Róbert Lenický. "Thermocouple Sensor Influence on Temperature Field in SMA Actuator." Applied Mechanics and Materials 394 (September 2013): 50–56. http://dx.doi.org/10.4028/www.scientific.net/amm.394.50.

Повний текст джерела
Анотація:
The paper deals with thermal analysis, modeling and simulation of the Shape Memory Alloy (SMA) actuator with temperature sensor. Because the capabilities of analytical description of SMA system are limited, numerical simulations of model have to be performed. Two different numerical models are investigated - lumped and continuous model. Simple parametric lumped model of actuator thermal field is developed in order to describe thermal field at the measuring point. The characteristic parameters of the lumped model are set up according to continuous coupled electric-thermal model made in ANSYS FEM program.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Thermal field simulation"

1

Terril, Nathaniel D. "Field Simulation for the Microwave Heating of Thin Ceramic Fibers." Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/36863.

Повний текст джерела
Анотація:
Microwave processing of ceramics has seen a growth in research and development efforts throughout the past decade. One area of interest is the exploration of improved heating control through experiments and numerical modeling. Controlled heating may be used to counteract non-uniform heating and avoid destructive phenomena such as cracking and thermal runaway. Thermal runaway is a potential problem in materials with temperature dependent dielectric properties. As the material absorbs electromagnetic energy, the temperature increases as does its ability to absorb more energy. Controlled processing of the material may be achieved by manipulating the applied field. The purpose of this research is to model the interaction of the EM-field with a thin ceramic fiber to investigate possible mechanisms that may affect the heating process. The fiber undergoes microwave heating in a single-mode resonant applicator. Maxwell's equations for the fields within the cavity are solved using mode-matching techniques taking into account the field interaction of the fiber and an arbitrarily shaped coupling aperture. Effects of varying the aperture shape on the field distribution are explored. The coupled nature of the electromagnetic solution with the material's temperature-dependent properties, including an analysis of non-uniform heating, is also discussed.
Master of Science
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Yarimpabuc, Durmus. "Numerical Simulation Of Thermal Convection Under The Influence Of A Magnetic Field By Using Solenoidal Bases." Phd thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613393/index.pdf.

Повний текст джерела
Анотація:
The effect of an imposed magnetic field on the thermal convection between rigid plates heated from below under the influence of gravity is numerically simulated in a computational domain with periodic horizontal extent. The numerical technique is based on solenoidal basis functions satisfying the boundary conditions for both velocity and induced magnetic field. The expansion bases for the thermal field are also constructed to satisfy the boundary conditions. The governing partial differential equations are reduced to a system of ordinary differential equations governing the time evolution of the expansion coefficients under Galerkin projection onto the subspace spanned by the dual bases. In the process, the pressure term in the momentum equation is eliminated. The system validated in the linear regime is then used for some numerical experiments in the nonlinear regime.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Huang, Zhida. "SIMULATION OF METAL GRAIN GROWTH IN LASER POWDER BED FUSION PROCESS USING PHASE FIELD THERMAL COUPLED MODEL." Case Western Reserve University School of Graduate Studies / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=case1554391043588225.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Li, Jingran. "Integration of Physically-based and Data-driven Approaches for Thermal Field Prediction in Additive Manufacturing." Thesis, Virginia Tech, 2017. http://hdl.handle.net/10919/79620.

Повний текст джерела
Анотація:
A quantitative understanding of thermal field evolution is vital for quality control in additive manufacturing (AM). Because of the unknown material parameters, high computational costs, and imperfect understanding of the underlying science, physically-based approaches alone are insufficient for component-scale thermal field prediction. Here, I present a new framework that integrates physically-based and data-driven approaches with quasi in situ thermal imaging to address this problem. The framework consists of (i) thermal modeling using 3D finite element analysis (FEA), (ii) surrogate modeling using functional Gaussian process, and (iii) Bayesian calibration using the thermal imaging data. Based on heat transfer laws, I first investigate the transient thermal behavior during AM using 3D FEA. A functional Gaussian process-based surrogate model is then constructed to reduce the computational costs from the high-fidelity, physically-based model. I finally employ a Bayesian calibration method, which incorporates the surrogate model and thermal measurements, to enable layer-to-layer thermal field prediction across the whole component. A case study on fused deposition modeling is conducted for components with 7 to 16 layers. The cross-validation results show that the proposed framework allows for accurate and fast thermal field prediction for components with different process settings and geometric designs.
Master of Science
This paper aims to achieve the layer to layer temperature monitoring and consequently predict the temperature distribution for any new freeform geometry. An engineering statistical synergistic model is proposed to integrate the pure statistical methods and finite element modeling (FEM), which is physically meaningful as well as accurate for temperature prediction. Besides, this proposed synergistic model contains geometry information, which can be applied to any freeform geometry. This paper serves to enable a holistic cyber physical systems-based approach for the additive manufacturing (AM) not only restricted in fused deposition modeling (FDM) process but also can be extended to powder-based process like laser engineered net shaping (LENS) and selective laser sintering (SLS). This paper as well as the scheduled future works will make it affordable for customized AM including customized geometries and materials, which will greatly accelerate the transition from rapid prototyping to rapid manufacturing. This article demonstrates a first evaluation of engineering statistical synergistic model in AM technology, which gives a perspective on future researches about online quality monitoring and control of AM based data fusion principles.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Liu, Wei. "Electro-thermal simulations and measurements of silicon carbide power transistors." Doctoral thesis, Stockholm, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-86.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Wirnsberger, Peter. "Computer simulation and theoretical prediction of thermally induced polarisation." Thesis, University of Cambridge, 2018. https://www.repository.cam.ac.uk/handle/1810/282988.

Повний текст джерела
Анотація:
In this thesis, we study the phenomenon of thermally induced polarisation using a combination of theory and computer simulation. Molecules of sufficiently low symmetry exhibit thermo-molecular orientation when subjected to a temperature gradient, leading to considerable electrostatic fields in polar liquids. Here, we first use non-equilibrium molecular dynamics simulations to study this interesting effect numerically. To this end, we propose an integration algorithm to impose a constant heat flux in simulations and show that it greatly improves energy conservation compared to a previous algorithm. We next investigate the thermal polarisation of water and find that truncation of electrostatic interactions can lead to severe artefacts, such as the wrong sign of polarisation and an overestimation of the electric field. We further show that the quadrupole-moment contribution to the electric field is significant and responsible for an inversion of its sign. To facilitate the theoretical description of electrostatic interactions, we propose a new dipolar model fluid as a perturbation of a Stockmayer fluid. Using this modified Stockmayer model, we provide numerical evidence for the recently proposed phenomenon of thermally induced monopoles. We show that the electrostatic field generated by a pair of heated/cooled colloidal particles immersed in such a solvent can be trivially described by two Coulomb charges. Finally, we propose a mean-field theory to predict the thermo-polarisation effect exhibited by our model fluid theoretically, and demonstrate near quantitative agreement with simulation results.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

James, William Thomas. "Electro-thermal-mechanical modeling of GaN HFETs and MOSHFETs." Thesis, Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/41212.

Повний текст джерела
Анотація:
High power Gallium Nitride (GaN) based field effect transistors are used in many high power applications from RADARs to communications. These devices dissipate a large amount of power and sustain high electric fields during operation. High power dissipation occurs in the form of heat generation through Joule heating which also results in localized hot spot formation that induces thermal stresses. In addition, because GaN is strongly piezoelectric, high electric fields result in large inverse piezoelectric stresses. Combined with residual stresses due to growth conditions, these effects are believed to lead to device degradation and reliability issues. This work focuses on studying these effects in detail through modeling of Heterostructure Field Effect Transistors (HFETs) and metal oxide semiconductor hetero-structure field effect transistor (MOSHFETs) under various operational conditions. The goal is to develop a thorough understanding of device operation in order to better predict device failure and eventually aid in device design through modeling. The first portion of this work covers the development of a continuum scale model which couples temperature and thermal stress to find peak temperatures and stresses in the device. The second portion of this work focuses on development of a micro-scale model which captures phonon-interactions at the device scale and can resolve local perturbations in phonon population due to electron-phonon interactions combined with ballistic transport. This portion also includes development of phonon relaxation times for GaN. The model provides a framework to understand the ballistic diffusive phonon transport near the hotspot in GaN transistors which leads to thermally related degradation in these devices.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Shala, Enise, and Caroline Svanholm. "Thermodynamics of the Subsurface of Glaciers with Insights from Lomonosovfonna Ice Field at Svalbard." Thesis, Uppsala universitet, Luft-, vatten och landskapslära, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-351658.

Повний текст джерела
Анотація:
Glaciers are important components of the Earth's environment and are mainly found in polar and high elevation areas. They are crucial for understanding the past, ongoing and upcoming environmental changes, relevant for fresh water supply, logistical and recreational purposes. Subsurface temperature of glaciers is an important parameter heavily influencing the fluxes of mass and energy. The project focuses on how the temperature changes inside glaciers and which factors contribute to the change. Thermal conduction is one of the key processes controlling the thermodynamics of glaciers. This defines how well heat is transferred inside glaciers and how well the temperature propagates. The process of heat conduction at Lomonosovfonna ice field, Svalbard, is described using numerical simulations constrained by measured initial and boundary conditions. Simulated subsurface temperature is in line with measurements before the onset of melt in summer. After that deviations increase as the used model does not consider the process of melt water refreezing. This makes the simulation only partially successful.
Glaciärer är viktiga komponenter i jordens omgivning och återfinns främst i polarområden och områden på hög höjd. De är viktiga för att förstå tidigare, pågående och kommande miljöförändringar, relevanta för färskvattenförsörjning, logistiska och återskapande ändamål. Temperaturen inom glaciärer är en viktig parameter som påverkar flödena av massa och energi. Projektet fokuserar på hur temperaturen förändras inom glaciärer och vilka faktorer som bidrar till förändringen. Värmeledning är en av nyckelprocesserna som kontrollerar termodynamiken hos glaciärer. Detta definierar hur väl värme förflyttas inom glaciärer och hur väl temperaturen sprider sig. Värmeledningsprocessen på isfältet Lomonosovfonna, Svalbard, beskrivs med hjälp av numeriska simuleringar begränsade av uppmätta initial- och gränsförhållanden. Simulering av temperaturen under ytan stämmer överens med mätningarna före smältningen på sommaren. Därefter ökar avvikelsen, eftersom modellen som använts inte tar hänsyn till processen av återfrysning av smältvatten. Detta gör att simuleringen endast är delvist lyckad.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Pimenta, Paulo Vicente de Cassia Lima. "Thermomechanical simulation of continuous casting process using element based finite-volume method." Universidade Federal do CearÃ, 2014. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=13684.

Повний текст джерела
Анотація:
CoordenaÃÃo de AperfeÃoamento de Pessoal de NÃvel Superior
The continuous casting technique in the last four decades has been large used for to production of semi-finished steel. The heat transfer is major mechanism and it occurs in various steps during the continuous casting. The quality of steel is directly related to the way the heat transfer occur because the thermal variations produce mechanical loads as well as contact forces which are generated through the rollers and shake of the mold. Such factors may cause defects such as fractures or cracks in the final product if the resulting stresses and strains exceed critical values. The technique must be improved in order to reduce the appearance of defects and the production time. For this a good understanding of physical phenomena involved during the solidification process is critical. The focus of this work is to apply the EbFVM (Element based Finite-Volume Method) approach to study the effects of linear tensions unidirectionally coupled with the temperature applied to continuous casting of the steel 1013D (0,3% of carbon) In the simulations we adopted some simplifications such as the Plane Strain and isotropic material. We also neglected the body forces contact with the rollers the liquid pressure on the walls of the steel ingot (ferrostatic pressure) and the convective effect. However despite of the simplifications adopted this work provides quantitative informations on the linear tensions accumulation that point out to areas of possible of cracks formations
A tÃcnica de lingotamento contÃnuo nas Ãltimas quatro dÃcadas à cada vez mais utilizada na produÃÃo de aÃo semiacabado. A transferÃncia de calor à o principal mecanismo dominante e ocorre em todas as etapas do processo. A qualidade do aÃo no lingotamento està diretamente relacionada à forma que ocorrem as trocas de calor pois as variaÃÃes tÃrmicas produzem carregamentos mecÃnicos assim como as forÃas de contato as quais sÃo geradas por intermÃdio dos rolos e da oscilaÃÃo do molde. Tais fatores podem causar defeitos como fraturas ou trincas no produto final caso as tensÃes e deformaÃÃes resultantes excedam valores crÃticos. O aprimoramento da tÃcnica tem a finalidade de evitar o surgimento de defeitos e reduzir o tempo de produÃÃo. Para isso à fundamental uma boa compreensÃo dos fenÃmenos fÃsicos envolvidos ao longo do processo de solidificaÃÃo. O foco deste trabalho à aplicar a abordagem do EbFVM (Element based Finite-Volume Method) no estudo dos efeitos das tensÃes lineares acopladas unidirecionalmente com a temperatura aplicado ao lingotamento contÃnuo do aÃo 1013D (0,3% de carbono) Nas simulaÃÃes adotou-se algumas simplificaÃÃes com o estado plano de tensÃes e isotropia do material. Descartando-se as forÃas de corpo o contato com os rolos a pressÃo do aÃo lÃquido nas paredes do lingote (pressÃo ferrostÃtica) e o efeito convectivo. Contudo apesar das simplificaÃÃes adotadas este trabalho traz informaÃÃes quantitativas quanto a formaÃÃo do acÃmulo das tensÃes lineares que apontam para regiÃes de possÃveis formaÃÃes de trincas
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Mehra, Bineet. "Design and optimisation of innovative electronic cooling heat sinks with enhanced thermal performances using numerical and experimental methods." Thesis, Ecole nationale supérieure Mines-Télécom Lille Douai, 2019. http://www.theses.fr/2019MTLD0005/document.

Повний текст джерела
Анотація:
Cette thèse de doctorat s’intéresse aux mécanismes d’amélioration des transferts dans des géométries de dissipateurs thermiques à plaques et ailettes. Une première partie est consacrée à l’étude d’une configuration académique à l’aide de simulations numériques visant à obtenir une amélioration du transfert de chaleur conjugué en modifiant uniquement par des découpes la forme géométrique des ailettes planes conductrices. Une analyse locale approfondie de l’écoulement et des champs thermiques a été effectuée avec notamment le principe de synergie locale, des champs de vitesse et de gradients thermiques, pour comprendre l’effet des modifications géométriques. Ce mémoire présente également le développement de dissipateurs aux performances thermo-aérauliques augmentées pour des applications de refroidissement de coffrets électronique embarqués. L’intensification des transferts thermiques est obtenue par la génération d’écoulements secondaires qui provoquent un brassage de fluide et réduisent la résistance thermique à la paroi en perturbant le développement de la couche limite thermique. Différentes configurations de dissipateurs avec deux types de générateurs d’écoulements secondaires, paires d’ailettes Delta et protrusions, ont été étudiées numériquement, en employant une modélisation de type « RANS ». Les performances thermo-aérauliques des géométries munies de générateurs de vorticité ont été comparées à celle d’un dissipateur thermique de référence « lisse ». Des prototypes ont également été fabriqués et testés sur un banc expérimental spécifiquement développé pour réaliser des mesures des performances globales en termes de puissance thermique et de pertes de charge. Les résultats expérimentaux et numériques ont été confrontés afin de qualifier les simulations réalisées. Par la suite, une étude d’optimisation employant l’analyse factorielle Taguchi a été utilisée afin d’optimiser les paramètres géométriques des dissipateurs retenus. Deux fonctions objectif ont été considérées : la maximisation du facteur de performance thermique à iso puissance de ventilation (PEC) et la réduction de la température moyenne de paroi du dissipateur par rapport au cas de référence. L’analyse des performances thermo-aérauliques globales des géométries étudiées a été complétée par une analyse qualitative locale des champs thermiques et d’écoulement notamment avec le principe de synergie
This doctoral thesis focuses on mechanisms of heat transfer enhancement in plate and fin heat sink geometries. First part of the thesis is dedicated to study an academic configuration using numerical simulations to achieve an improvement in conjugate heat transfer by modifying only the geometrical shape (through punching) of the conductive plane fins. An in-depth local analysis of the flow and thermal fields was carried out with the local synergy principle, velocity and thermal gradients, to understand the effect of geometric modifications. This thesis also presents the development of heat sinks with increased thermo-hydraulic performance for on-board electronic box cooling applications. The intensification of the heat transfer is obtained by the generation of secondary flows which cause an intensive mixing of fluid and reduces the thermal resistance to the wall by disrupting the development of the thermal boundary layer. Different heat sink geometries with two types of secondary flow generators : delta winglet pair and protrusions were numerically studied using RANS approach. The thermo-hydraulic performances of the geometries equipped with vortex generators were compared with that of a smooth reference heat sink. The prototypes were also manufactured and tested on an experimental bench specifically designed to perform global performance measurements in terms of thermal power and pressure drops. Experimental and numerical results were compared to qualify the simulations performed. Subsequently, an optimization study using Taguchi factorial analysis was used to optimize the geometrical parameters of the chosen dissipaters. Two objective functions were considered : maximization of either iso-pumping power performance criteria (PEC) or average wall temperature of the dissipaters compared to the reference case. The global thermo-hydraulic performance analysis of the studied geometries was completed by a qualitative analysis of local flow and thermal fields, in particular with the local field synergy principle
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Thermal field simulation"

1

Lin, Angela A. Two dimensional numerical simulation of a non-isothermal GaAs MESFET. 1992.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Thermal field simulation"

1

Lu, De Sheng, Yu Zhou, Bei Wang, Yu Jin Wang, Jia Hu Ouyang, and Hua Ke. "Numerical Simulation of Thermal Stress Field of Arc-Shaped Thermal-Protection Component." In Key Engineering Materials, 1110–13. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.1110.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Liu, Baochang, Shujing Wang, Shengli Ji, Zhe Han, Xinzhe Zhao, and Siqi Li. "Simulation and Experimental Research on Flow Field and Temperature Field of Diamond Impregnated Drill Bit." In Advances in Heat Transfer and Thermal Engineering, 733–38. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4765-6_127.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Barfusz, Oliver, Felix Hötte, Stefanie Reese, and Matthias Haupt. "Pseudo-transient 3D Conjugate Heat Transfer Simulation and Lifetime Prediction of a Rocket Combustion Chamber." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 265–78. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_17.

Повний текст джерела
Анотація:
Abstract Rocket engine nozzle structures typically fail after a few engine cycles due to the extreme thermomechanical loading near the nozzle throat. In order to obtain an accurate lifetime prediction and to increase the lifetime, a detailed understanding of the thermomechanical behavior and the acting loads is indispensable. The first part is devoted to a thermally coupled simulation (conjugate heat transfer) of a fatigue experiment. The simulation contains a thermal FEM model of the fatigue specimen structure, RANS simulations of nine cooling channel flows and a Flamelet-based RANS simulation of the hot gas flow. A pseudo-transient, implicit Dirichlet–Neumann scheme is utilized for the partitioned coupling. A comparison with the experiment shows a good agreement between the nodal temperatures and their corresponding thermocouple measurements. The second part consists of the lifetime prediction of the fatigue experiment utilizing a sequentially coupled thermomechanical analysis scheme. First, a transient thermal analysis is carried out to obtain the temperature field within the fatigue specimen. Afterwards, the computed temperature serves as input for a series of quasi-static mechanical analyses, in which a viscoplastic damage model is utilized. The evolution and progression of the damage variable within the regions of interest are thoroughly discussed. A comparison between simulation and experiment shows that the results are in good agreement. The crucial failure mode (doghouse effect) is captured very well.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Jing, Zhang, Sun Ying, and Li Qiuju. "Dynamic Thermal Simulation Study of Copper Slag Dilution Under Direct Current Field." In 7th International Symposium on High-Temperature Metallurgical Processing, 511–18. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119274643.ch63.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Jing, Zhang, Sun Ying, and Li Qiuju. "Dynamic Thermal Simulation Study of Copper Slag Dilution Under Direct Current Field." In 7th International Symposium on High-Temperature Metallurgical Processing, 511–18. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48093-0_63.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Lianfa, Yang, Wang Qin, and Zhang Zhen. "The Analysis of Thermal Field and Thermal Deformation of a Water-Cooling Radiator by Finite Element Simulation." In Advances in Intelligent Systems, 53–59. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-27869-3_7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Gu, Hua Zhi, Hou Zhi Wang, Mei Jie Zhang, Ao Huang, and Wen Jie Zhang. "Numerical Simulation of Temperature Field and Thermal Shock Resistance Property of Permeable Brick." In High-Performance Ceramics V, 1152–54. Stafa: Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-473-1.1152.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Martin, Katharina, Dennis Daub, Burkard Esser, Ali Gülhan, and Stefanie Reese. "Numerical Modelling of Fluid-Structure Interaction for Thermal Buckling in Hypersonic Flow." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 341–55. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_22.

Повний текст джерела
Анотація:
Abstract Experiments have shown that a high-enthalpy flow field might lead under certain mechanical constraints to buckling effects and plastic deformation. The panel buckling into the flow changes the flow field causing locally increased heating which in turn affects the panel deformation. The temperature increase due to aerothermal heating in the hypersonic flow causes the metallic panel to buckle into the flow. To investigate these phenomena numerically, a thermomechanical simulation of a fluid-structure interaction (FSI) model for thermal buckling is presented. The FSI simulation is set up in a staggered scheme and split into a thermal solid, a mechanical solid and a fluid computation. The structural solver Abaqus and the fluid solver TAU from the German Aerospace Center (DLR) are coupled within the FSI code ifls developed at the Institute of Aircraft Design and Lightweight Structures (IFL) at TU Braunschweig. The FSI setup focuses on the choice of an equilibrium iteration method, the time integration and the data transfer between grids. To model the complex material behaviour of the structure, a viscoplastic material model with linear isotropic hardening and thermal expansion including material parameters, which are nonlinearly dependent on temperature, is used.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Kasagi, N., and Y. Ohtsubo. "Direct Numerical Simulation of Low Prandtl Number Thermal Field in a Turbulent Channel Flow." In Turbulent Shear Flows 8, 97–119. Berlin, Heidelberg: Springer Berlin Heidelberg, 1993. http://dx.doi.org/10.1007/978-3-642-77674-8_8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Sumit Agarwal and Niranjan Sahoo. "Exhaust Gas Flow Field Simulation of an Internal Combustion Engine for a Thermal Sensor." In Fluid Mechanics and Fluid Power – Contemporary Research, 195–203. New Delhi: Springer India, 2016. http://dx.doi.org/10.1007/978-81-322-2743-4_20.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Thermal field simulation"

1

Musho, T. D., S. M. Claiborne, and D. G. Walker. "NEGF Quantum Simulation of Field Emission Devices." In ASME/JSME 2011 8th Thermal Engineering Joint Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ajtec2011-44504.

Повний текст джерела
Анотація:
Recent studies of wide band-gap diamond field emission devices have realized superior performance and lifetime. However, theoretical studies using standard Fowler-Nordheim (FN) theory do not fully capture the physics of diamond semiconductor emitters as a result of the fitting parameters inherent to the FN approximation. The following research computationally models wide band-gap field emission devices from a quantum point of view, using a novel non-equilibrium Green’s function (NEGF) approach previously applied to modeling solid-state electronic devices. Findings from this research confirm non-linearities in the FN curve and provide alternative explanations to discrepancies between standard FN theory.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Lai, KoonChun, ChoonFoong Tan, KokSeng Ong, and KokEng Ng. "Thermal field simulation of multi package LED module." In 2015 International Symposium on Next-Generation Electronics (ISNE). IEEE, 2015. http://dx.doi.org/10.1109/isne.2015.7132012.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Song, Xianzhi, Gensheng Li, Zehao Lv, Xiaodong Hu, and Bin Zhu. "NUMERICAL SIMULATION ON CHARACTERISTICS OF THERMAL JET IMPACT FLOW FIELD." In First Thermal and Fluids Engineering Summer Conference. Connecticut: Begellhouse, 2016. http://dx.doi.org/10.1615/tfesc1.tdp.012976.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Qi, Gao, and Wang Kaikun. "Study of the thermal field and thermal stress field of typical BGA packaging by numerical simulation." In 2014 15th International Conference on Electronic Packaging Technology (ICEPT). IEEE, 2014. http://dx.doi.org/10.1109/icept.2014.6922809.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Qi, Gao, and Wang Kaikun. "Study of the thermal field and thermal stress field of typical BGA packaging by numerical simulation." In 2014 Joint IEEE International Symposium on the Applications of Ferroelectrics, International Workshop on Acoustic Transduction Materials and Devices & Workshop on Piezoresponse Force Microscopy (ISAF/IWATMD/PFM). IEEE, 2014. http://dx.doi.org/10.1109/isaf.2014.6918018.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Drahos, Peter, and Vladimir Kutis. "Modelling and simulation of thermal field of SMA actuator." In 2012 13th International Carpathian Control Conference (ICCC). IEEE, 2012. http://dx.doi.org/10.1109/carpathiancc.2012.6228629.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Hu, Dachao, and Junling Hu. "Combined water seam crystallizer's thermal field analysis and simulation." In Education (ICCSE 2011). IEEE, 2011. http://dx.doi.org/10.1109/iccse.2011.6028665.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Zhang, Shiling. "The Electrical and Thermal Multi-Physical Field Simulation of HVDC." In 2019 International Conference on Computer Network, Electronic and Automation (ICCNEA). IEEE, 2019. http://dx.doi.org/10.1109/iccnea.2019.00063.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Zhu, Yu, Qian Cai, and Jason Gerber. "Thermal Resistance Extraction of Power Transistors using Electric Field Simulation." In 31st European Microwave Conference, 2001. IEEE, 2001. http://dx.doi.org/10.1109/euma.2001.339186.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Mukutmoni, Devadatta, Jaehoon Han, and Ales Alajbegovic. "Numerical and Experimental Investigation of Temperature and Flow Field in a Full Vehicle." In ASME/JSME 2011 8th Thermal Engineering Joint Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ajtec2011-44405.

Повний текст джерела
Анотація:
Accurate CFD simulation of full vehicle enables vehicle development specialists to gain access to detailed flow and temperature field for the entire vehicle and for arbitrary driving conditions. Information of that nature is invaluable to vehicle development and design since it leads to detailed understanding of the problem areas and pointers to how the design and performance can be improved from the thermal management perspective. Presented are simulations of the vehicle Renault Scenic II cruising at 60 kilometers per hour using PowerFLOW. The simulations were performed using a coupling between the flow solver PowerFLOW and the thermal simulation package PowerTHERM that accounts for conduction and radiation effects. The simulation results were compared with the test data for steady state forced convection case. In order to gauge the accuracy of the simulations, extensive validations were made with thermocouple data and flow measurements. Good agreement was observed between the simulation results and the measurements.
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Thermal field simulation"

1

Clausen, Jay, Michael Musty, Anna Wagner, Susan Frankenstein, and Jason Dorvee. Modeling of a multi-month thermal IR study. Engineer Research and Development Center (U.S.), July 2021. http://dx.doi.org/10.21079/11681/41060.

Повний текст джерела
Анотація:
Inconsistent and unacceptable probability of detection (PD) and false alarm rates (FAR) due to varying environmental conditions hamper buried object detection. A 4-month study evaluated the environmental parameters impacting standoff thermal infra-red(IR) detection of buried objects. Field observations were integrated into a model depicting the temporal and spatial thermal changes through a 1-week period utilizing a 15-minute time-step interval. The model illustrates the surface thermal observations obtained with a thermal IR camera contemporaneously with a 3-d presentation of subsurface soil temperatures obtained with 156 buried thermocouples. Precipitation events and subsequent soil moisture responses synchronized to the temperature data are also included in the model simulation. The simulation shows the temperature response of buried objects due to changes in incoming solar radiation, air/surface soil temperature changes, latent heat exchange between the objects and surrounding soil, and impacts due to precipitation/changes in soil moisture. Differences are noted between the thermal response of plastic and metal objects as well as depth of burial below the ground surface. Nearly identical environmental conditions on different days did not always elicit the same spatial thermal response.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Fan, Jianhua, Zhiyong Tian, Simon Furbo, Weiqiang Kong, and Daniel Tschopp. Simulation and design of collector array units within large systems. IEA SHC Task 55, October 2019. http://dx.doi.org/10.18777/ieashc-task55-2019-0004.

Повний текст джерела
Анотація:
Solar radiation data is necessary for the design of solar heating systems and used to estimate the thermal performance of solar heating plants. Compared to global irradiance, the direct beam component shows much more variability in space and time. The global radiation split into beam and diffuse radiation on collector plane is important for the evaluation of the performance of different collector types and collector field designs.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Kulyavtsev, Paulina, Grigory Eremeev, and Sam Posen. Simulations of Nb3Sn Layer RF Field Limits Due to Thermal Impedance. Office of Scientific and Technical Information (OSTI), March 2021. http://dx.doi.org/10.2172/1831972.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Liu, X., Z. Chen, and S. E. Grasby. Using shallow temperature measurements to evaluate thermal flux anomalies in the southern Mount Meager volcanic area, British Columbia, Canada. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/330009.

Повний текст джерела
Анотація:
Geothermal is a clean and renewable energy resource. However, locating where elevated thermal gradient anomalies exist is a significant challenge when trying to assess potential resource volumes during early exploration of a prospective geothermal area. In this study, we deployed 22 temperature probes in the shallow subsurface along the south flank of the Mount Meager volcanic complex, to measure the transient temperature variation from September 2020 to August 2021. In our data analysis, a novel approach was developed to estimate the near-surface thermal distribution, and a workflow and code with python language have been completed for the thermal data pre-processing and analysis. The long-term temperature variation at different depths can be estimated by modelling, so that the relative difference of deducing deeper geothermal gradient anomalies can be assessed. Our proposed inversion and simulation methods were applied to calculating the temperature variation at 2.0 meters depth. The results identified a preferred high thermal flux anomalous zone in the south Mount Meager area. By combining with previous studies, the direct analysis and estimation of anomalous thermal fields based on the collected temperature data can provide a significant reference for interpretation of the regional thermal gradient variation.
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Thermal field simulation" для конкретних типів джерел:
Статті в журналах Дисертації
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії