Добірка наукової літератури з теми "Thermal and mechanical models"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Thermal and mechanical models".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Thermal and mechanical models"
Wilson, D. A., and J. R. Warren. "Thermal Mechanical Crack Growth Rate of a High Strength Nickel Base Alloy." Journal of Engineering for Gas Turbines and Power 108, no. 2 (April 1, 1986): 396–402. http://dx.doi.org/10.1115/1.3239918.
Повний текст джерелаMeena, Ayush, Tushar Sharma, Mohit Patodiya, and P. V. Ramana. "Chronology of Recycled Plastic Mathematical Models, Mechanical and Thermal Characterisation." Proceedings of the 12th Structural Engineering Convention, SEC 2022: Themes 1-2 1, no. 1 (December 19, 2022): 499–506. http://dx.doi.org/10.38208/acp.v1.540.
Повний текст джерелаHentati, Hamdi, Ilyes Ben Naceur, Wassila Bouzid, and Aref Maalej. "Numerical Analysis of Damage Thermo-Mechanical Models." Advances in Applied Mathematics and Mechanics 7, no. 5 (July 21, 2015): 625–43. http://dx.doi.org/10.4208/aamm.2014.m517.
Повний текст джерелаKan, Qian Hua, Jian Li, Han Jiang, and Guo Zheng Kang. "An Improved Thermo-Ratcheting Boundary of Pressure Pipeline." Key Engineering Materials 725 (December 2016): 311–15. http://dx.doi.org/10.4028/www.scientific.net/kem.725.311.
Повний текст джерелаSlavik, D., and Huseyin Sehitoglu. "Constitutive Models Suitable for Thermal Loading." Journal of Engineering Materials and Technology 108, no. 4 (October 1, 1986): 303–12. http://dx.doi.org/10.1115/1.3225887.
Повний текст джерелаG. K, Mahadeva Raju, G. M. Madhu, P. Dinesh Sankar Reddy, and Karthik K V. "Mechanical and Thermal Properties of Epoxy Polymer Composites Reinforced with CuO." YMER Digital 20, no. 12 (December 15, 2021): 272–80. http://dx.doi.org/10.37896/ymer20.12/25.
Повний текст джерелаAli, Mahmoud, Thomas Sayet, Alain Gasser, and Eric Blond. "Transient Thermo-Mechanical Analysis of Steel Ladle Refractory Linings Using Mechanical Homogenization Approach." Ceramics 3, no. 2 (April 2, 2020): 171–89. http://dx.doi.org/10.3390/ceramics3020016.
Повний текст джерелаIrving, A. D. "Validation of dynamic thermal models." Energy and Buildings 10, no. 3 (January 1988): 213–20. http://dx.doi.org/10.1016/0378-7788(88)90007-2.
Повний текст джерелаBahrami, M., J. R. Culham, M. M. Yananovich, and G. E. Schneider. "Review of Thermal Joint Resistance Models for Nonconforming Rough Surfaces." Applied Mechanics Reviews 59, no. 1 (January 1, 2006): 1–12. http://dx.doi.org/10.1115/1.2110231.
Повний текст джерелаCampano, Miguel Ángel, Samuel Domínguez-Amarillo, Jesica Fernández-Agüera, and Juan José Sendra. "Thermal Perception in Mild Climate: Adaptive Thermal Models for Schools." Sustainability 11, no. 14 (July 19, 2019): 3948. http://dx.doi.org/10.3390/su11143948.
Повний текст джерелаДисертації з теми "Thermal and mechanical models"
Nguyen, Van-Tri. "Thermal and thermo-mechanical behavior of energy piles." Thesis, Paris Est, 2017. http://www.theses.fr/2017PESC1160/document.
Повний текст джерелаThe thermal and thermo-mechanical behavior of energy piles is investigated by various approaches: laboratory measurement on small soil samples, physical modeling on small-scale pile, experiments on real-scale pile, and analytical/numerical calculations. First, the thermal conductivity of unsaturated loess is measured simultaneously with moisture content and suction. The results show a unique relationship between thermal conductivity and moisture content during a wetting/drying cycle while a clear hysteresis loop can be observed on the relationship between thermal conductivity and suction. Second, thermal tests are performed on a full-scale experimental energy pile to observe heat transfer at the real scale. Third, an analytical solution is proposed to simulate conductive heat transfer from an energy pile to the surrounding soil during heating. The above-mentioned tasks related to the thermal behavior are then completed by studies on the thermo-mechanical behavior of energy piles. On one hand, experiments are performed on a small-scale pile installed either in dry sand or in saturated clay. Thirty thermal cycles, representing thirty annual cycles, are applied to the pile under various constant pile head loads. The results show irreversible pile head settlement with thermal cycles; the settlement is higher at higher pile head load. In addition, the irreversible thermal settlement is the most significant during the first cycles; it becomes negligible at high number of cycles. On the other hand, the experimental work with small-scale pile is completed with numerical calculations by using the finite element method. This approach is first validated with the results on small-scale pile prior to be used to predict the results of full-scale experiments
Vilaithong, Rummiya [Verfasser]. "Models for Thermal and Mechanical Monitoring of Power Transformers / Rummiya Vilaithong." Aachen : Shaker, 2011. http://d-nb.info/1070150282/34.
Повний текст джерелаKiley, Erin Marie. "Reduced-Dimensional Coupled Electromagnetic, Thermal, and Mechanical Models of Microwave Sintering." Digital WPI, 2016. https://digitalcommons.wpi.edu/etd-dissertations/212.
Повний текст джерелаOgata, Sho. "Development of Coupled Thermal-Hydraulic-Mechanical-Chemical Models for Predicting Rock Permeability Change." Doctoral thesis, Kyoto University, 2019. http://hdl.handle.net/2433/244532.
Повний текст джерела0048
新制・課程博士
博士(工学)
甲第22051号
工博第4632号
新制||工||1722(附属図書館)
京都大学大学院工学研究科都市社会工学専攻
(主査)教授 岸田 潔, 教授 木村 亮, 教授 小池 克明
学位規則第4条第1項該当
Doctor of Philosophy (Engineering)
Kyoto University
DFAM
Evans, Thomas C. (Thomas Carl) 1971. "Statistical usage models in mobile processor thermal design and testing." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/89389.
Повний текст джерелаIncludes bibliographical references (p. 77).
by Thomas C. Evans.
S.M.
Kokorev, A. E., A. O. Kiriak, and О. Г. Аврунін. "Some Models of Mechanical and Thermal Properties of Skin in the Context of Plastic Surgery." Thesis, Kharkiv, KNURE, 2019. http://openarchive.nure.ua/handle/document/10196.
Повний текст джерелаUrquiza, Fernandez Guillermo 1978. "Thermal model of an annular fuel cell." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/89920.
Повний текст джерелаIncludes bibliographical references (p. 81).
by Guillermo Urquiza Fernandez.
S.M.and S.B.
Lahoori, Mojdeh. "Thermo-hydro-mechanical behavior of an embankment to store thermal energy." Electronic Thesis or Diss., Université de Lorraine, 2020. http://www.theses.fr/2020LORR0252.
Повний текст джерелаNowadays, thermal energy storage in geostructures like embankments can be possible by installing the horizontal heat exchangers in different layers of compacted soil. In this system, the thermal energy is stored in summer via a fluid, circulating in the heat exchangers, to be extracted in the demand period. When the serviceability of embankment as a medium to store the thermal energy starts, the compacted soil will be subjected to the daily and seasonally temperature variations. These seasonal temperature variations could modify the thermo-hydro-mechanical performance of the compacted soil. Thus, the aim of this study is to investigate the thermal and mechanical performances of a compacted soil when it is subjected to monotonic and cyclic temperature variations. The studied soil is a sandy lean clay that is frequently used in embankment constructions in France. The thermal and mechanical behavior of the soil are investigated at a compaction state corresponding to the optimal thermal properties. However, this compacted soil is unsaturated and the estimation of its thermal properties is complex. In this study, an inverse analytical model is proposed to estimate the thermal properties of the soil using temperature monitoring in the range of 20 to 50 °C in a soil compacted in a large container. The estimated thermal parameters were compared to classical laboratory measurements (transient and steady-state methods). The comparison showed that the estimated values were close to the results obtained in transient laboratory method. Using this method, the thermal efficiency of the compacted soil can be verified in the lifetime of the storage system. To ensure the structure stability, long-term mechanical response of these systems subjected to monotonic and cyclic temperature variations should be investigated. To achieve this aim, using temperature-controlled oedometric and direct shear devices, consolidation and shear parameters of the studied soil at different monotonic (5, 20, and 50 °C) and cyclic (5 to 50 °C) temperatures were investigated. The results of temperature-controlled oedometric tests showed that the effect of the temperature variation is more pronounced under vertical pressures higher than the preconsolidation pressure. The compression and swelling indexes could be considered independent of temperature variations. Therefore, the overall settlement of the embankment due to thermal variation near the heat exchangers could be considered negligible. The results of temperature-controlled direct shear tests showed that the temperature variations (monotonic heating or cooling, or temperature cycles) increased the cohesion which is beneficial for the bearing capacity and slope stability of embankments. These results can be directly used in the design of embankments to store thermal energy exposed to similar thermo-mechanical paths. Finally, the thermal performance of the compacted soil is verified using a numerical simulation considering the soil atmosphere interaction. Different depths installation of heat exchanger loops and different heat storage scenarios were simulated. The results showed that the compacted soil increases 8.5% the systems performance compared to the horizontal loop installation in the local soil. The results of two different scenarios show that an inlet fluid temperature of 50 °C in summer increases highly the system performance (13.7% to 41.4%) while the improvement is less significant (0% to 4.8%) for the ambient inlet temperature. Moreover, a deeper installation of horizontal loops increases the system performance. From the numerical simulation results can be concealed that the embankment is in interaction with the atmosphere from its upper and lateral surfaces, the thermal efficiency of the structure could be affected due to heat losses. Therefore, it is preferable to place the heat exchangers away from the top and side surfaces
Poller, Tilo. "Thermal and thermal-mechanical simulation for the prediction of fatigue processes in packages for power semiconductor devices." Doctoral thesis, Universitätsbibliothek Chemnitz, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-154320.
Повний текст джерелаFür die Entwicklung von Umrichtern ist die Kenntnis über die Zuverlässigkeit der Leistungselektronik ein wichtiges Kernthema. Insbesondere für Offshore-Anwendungen ist das Wissen über die stattfindenden Ermüdungsprozesse und die Abschätzung der zu erwartenden Lebensdauer der Bauteile essentiell. Hierfür hat sich die Simulation als ein wichtiges Werkzeug für die Entwicklung und Lebensdauerbewertung von leistungselektronischen Anlagen etabliert. In der folgenden Arbeit wird das thermische und das thermisch-mechanische Verhalten der Leistungselektronik mittels Simulationen untersucht. Hierzu wird ein Vergleich zwischen verschiedenen thermischen Modellen für Leistungsbauelemente durchgeführt. Schwerpunkt ist die Beschreibung der thermischen Kopplung zwischen den Chips und deren Einfluss auf die Lebensdauerabschätzung. Ein weiterer Schwerpunkt ist das Leistungsmodul, welches sich als ein Standardgehäuse etabliert hat. Dazu wird erklärt, wie die Variation der Einschaltzeit im aktiven Lastwechseltest den Fehlermodus dieses Gehäusetyps beeinflusst. Weiterhin wird untersucht, wie SiC als Leistungshalbleiter und DAB als Substrat die Zuverlässigkeit beein- flusst. Der Press-Pack ist für Hochleistungsapplikationen von hohem Interesse, da dieses Gehäuse im elektrischen Fehlerfall ohne äußere Unterstützung kurzschliesst. Jedoch ist das Wissen über diese Gehäusetechnologie unter aktiven Lastwechselbedingungen sehr limitiert. Mit Hilfe von Simulationen wird dieses Verhalten untersucht und mögliche Schwachpunkte abgeleitet. Am Ende der Arbeit werden Möglichkeiten untersucht, wie Mithilfe von FEM Simulationen die Lebensdauer von Leistungsmodulen evaluiert werden kann
Poller, Tilo. "Thermal and thermal-mechanical simulation for the prediction of fatigue processes in packages for power semiconductor devices." Doctoral thesis, Universitätsverlag der Technischen Universität Chemnitz, 2014. https://monarch.qucosa.de/id/qucosa%3A20135.
Повний текст джерелаFür die Entwicklung von Umrichtern ist die Kenntnis über die Zuverlässigkeit der Leistungselektronik ein wichtiges Kernthema. Insbesondere für Offshore-Anwendungen ist das Wissen über die stattfindenden Ermüdungsprozesse und die Abschätzung der zu erwartenden Lebensdauer der Bauteile essentiell. Hierfür hat sich die Simulation als ein wichtiges Werkzeug für die Entwicklung und Lebensdauerbewertung von leistungselektronischen Anlagen etabliert. In der folgenden Arbeit wird das thermische und das thermisch-mechanische Verhalten der Leistungselektronik mittels Simulationen untersucht. Hierzu wird ein Vergleich zwischen verschiedenen thermischen Modellen für Leistungsbauelemente durchgeführt. Schwerpunkt ist die Beschreibung der thermischen Kopplung zwischen den Chips und deren Einfluss auf die Lebensdauerabschätzung. Ein weiterer Schwerpunkt ist das Leistungsmodul, welches sich als ein Standardgehäuse etabliert hat. Dazu wird erklärt, wie die Variation der Einschaltzeit im aktiven Lastwechseltest den Fehlermodus dieses Gehäusetyps beeinflusst. Weiterhin wird untersucht, wie SiC als Leistungshalbleiter und DAB als Substrat die Zuverlässigkeit beein- flusst. Der Press-Pack ist für Hochleistungsapplikationen von hohem Interesse, da dieses Gehäuse im elektrischen Fehlerfall ohne äußere Unterstützung kurzschliesst. Jedoch ist das Wissen über diese Gehäusetechnologie unter aktiven Lastwechselbedingungen sehr limitiert. Mit Hilfe von Simulationen wird dieses Verhalten untersucht und mögliche Schwachpunkte abgeleitet. Am Ende der Arbeit werden Möglichkeiten untersucht, wie Mithilfe von FEM Simulationen die Lebensdauer von Leistungsmodulen evaluiert werden kann.
Книги з теми "Thermal and mechanical models"
1937-, Lenard John G., ed. Thermal-mechanical modelling of the flat rolling process. Berlin: Springer-Verlag, 1991.
Знайти повний текст джерелаDavid, Porter. Group interaction modelling of polymer properties. New York: M. Dekker, 1995.
Знайти повний текст джерелаAwrejcewicz, J. Nonsmooth dynamics of contacting thermoelastic bodies. New York, NY: Springer, 2009.
Знайти повний текст джерелаTianjian, Lu, and SpringerLink (Online service), eds. Introduction to Skin Biothermomechanics and Thermal Pain. Berlin, Heidelberg: Springer-Verlag Berlin Heidelberg, 2011.
Знайти повний текст джерелаIUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity (1997 Bochum, Germany). IUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity: Proceedings of the IUTAM symposium held in Bochum, Germany, 25-29 August 1997. Dordrecht: Kluwer Academic Publishers, 1999.
Знайти повний текст джерелаIUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity (1997 Bochum, Germany). IUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity: Proceedings of the IUTAM symposium held in Bochum, Germany, 25-29 August 1997. New York: Kluwer Academic Publishers, 2002.
Знайти повний текст джерелаA, Wirtz R., Lehmann G. L, and American Society of Mechanical Engineers. Heat Transfer Division., eds. Thermal modeling and design of electronic systems and devices: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, Texas, November 25-30, 1990. New York, N.Y: American Society of Mechanical Engineers, 1990.
Знайти повний текст джерелаPrasad, N. N. V. Thermomechanical crack growth using boundary elements. Southampton: WIT Press, 1998.
Знайти повний текст джерелаAwrejcewicz, J. Nonsmooth dynamics of contacting thermoelastic bodies. New York, NY: Springer, 2009.
Знайти повний текст джерелаYuriy, Pyr'yev, ed. Nonsmooth dynamics of contacting thermoelastic bodies. New York, NY: Springer, 2009.
Знайти повний текст джерелаЧастини книг з теми "Thermal and mechanical models"
Tamma, Kumar K., and A. Jain. "Thermal Contact Applications: Mechanical Contact Models." In Encyclopedia of Thermal Stresses, 4938–43. Dordrecht: Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-007-2739-7_752.
Повний текст джерелаVairo, Giuseppe, and Sami Montassar. "Mechanical Modelling of Stays under Thermal Loads." In Mechanics, Models and Methods in Civil Engineering, 481–98. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-24638-8_34.
Повний текст джерелаPietrzyk, Maciej, and John G. Lenard. "One-Dimensional Models of Flat Rolling." In Thermal-Mechanical Modelling of the Flat Rolling Process, 53–96. Berlin, Heidelberg: Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-84325-9_3.
Повний текст джерелаElizaryev, Alexey, Elina Nasyrova, Carlo Cattani, Denis Tarakanov, Dmitrii Tarakanov, and Ilmir Khasanov. "Mathematical Models for Assessment the Thermal Radiation of a Fireball During Bleve." In Lecture Notes in Mechanical Engineering, 323–33. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-85057-9_28.
Повний текст джерелаSørensen, B. F., and J. W. Holmes. "Fatigue of Continuous Fiber-Reinforced Ceramic Matrix Composites: Review of Mechanisms and Models." In Fatigue under Thermal and Mechanical Loading: Mechanisms, Mechanics and Modelling, 487–99. Dordrecht: Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-015-8636-8_50.
Повний текст джерелаDeVries, Warren R. "Mechanics and Thermal Models for Machining." In Analysis of Material Removal Processes, 39–79. New York, NY: Springer New York, 1992. http://dx.doi.org/10.1007/978-1-4612-4408-0_3.
Повний текст джерелаLiu, C. D., Y. F. Han, and M. G. Yan. "A Creep Constitutive Model of Dislocation Thermal Activation." In Mechanical Behavior of Materials, 181–87. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-1968-6_20.
Повний текст джерелаGoldman, Alex. "Physical, Mechanical and Thermal Aspects of Ferrites." In Handbook of Modern Ferromagnetic Materials, 581–88. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4615-4917-8_22.
Повний текст джерелаPolyakov, A. N., and I. P. Nikitina. "Application of Modal Analysis to Building Simulation Models of Thermal Processes in Machine Tools." In Lecture Notes in Mechanical Engineering, 75–84. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-54817-9_9.
Повний текст джерелаMorganti, Manlio Valerio, Stefano Longo, Marko Tirovic, Daniel J. Auger, and Raja Mazuir Shah Bin Raja Ahsan. "Modular Battery Cell Model for Thermal Management Modelling." In Lecture Notes in Mechanical Engineering, 87–102. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-75677-6_8.
Повний текст джерелаТези доповідей конференцій з теми "Thermal and mechanical models"
Murga, Gaizka, Heather Marshall, LeEllen Phelps, Ana Hervás, and Ibon Larracoechea. "ATST enclosure mechanical and thermal models." In Integrated Modeling of Complex Optomechanical Systems, edited by Torben Andersen and Anita Enmark. SPIE, 2011. http://dx.doi.org/10.1117/12.915575.
Повний текст джерелаPinheiro Ramos, Nícolas, Luís Felipe dos Santos Carollo, and Sandro Metrevelle Marcondes de Lima e Silva. "Comparison of Different Thermal Models to Estimate Thermal Properties." In 24th ABCM International Congress of Mechanical Engineering. ABCM, 2017. http://dx.doi.org/10.26678/abcm.cobem2017.cob17-1150.
Повний текст джерелаManin, Lionel, and Daniel Play. "Thermal Behavior Evaluation During Mechanical Design: Validation of Thermal Numerical Gearbox Models." In ASME 2000 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/detc2000/ptg-14457.
Повний текст джерелаSubramanian, Sankara J. "Mechanical Modeling of a Solder Thermal Interface Material: Implications for Thermo-Mechanical Reliability." In ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems collocated with the ASME 2005 Heat Transfer Summer Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/ipack2005-73304.
Повний текст джерелаSharifpur, Mohsen, Tshimanga Ntumba, and Josua P. Meyer. "Parametric Analysis of Effective Thermal Conductivity Models for Nanofluids." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-85093.
Повний текст джерелаDelprete, Cristiana, Carlo Rosso, and Raffaella Sesana. "Damage Criterions in Thermo-Mechanical Fatigue Models." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95470.
Повний текст джерелаCummings, Scott M., Tom McCabe, and Dan Gosselin. "Brake Shoes and Thermal Mechanical Shelling." In ASME 2008 Rail Transportation Division Fall Technical Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/rtdf2008-74016.
Повний текст джерелаBardot, D. M., and A. F. Emery. "Development of Complex Thermal Models Using Global Sensitivity and MCMC." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-13010.
Повний текст джерелаHoman, K. O. "Second Law Aspects of Simplified Models for Sensible Thermal Storage." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1335.
Повний текст джерелаBatson, Jennifer, and Ab Hashemi. "Precision Modular Thermal Deformation Modeling." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-80171.
Повний текст джерелаЗвіти організацій з теми "Thermal and mechanical models"
Liu, H. H., L. Li, L. Zheng, J. E. Houseworth, and J. Rutqvist. Investigations of Near-Field Thermal-Hydrologic-Mechanical-Chemical Models for Radioactive Waste Disposal in Clay/Shale Rock. Office of Scientific and Technical Information (OSTI), June 2011. http://dx.doi.org/10.2172/1050698.
Повний текст джерелаCorona, Edmundo, Sharlotte Kramer, Brian Lester, Amanda Jones, Brett Sanborn, Lyndsay Shand, and Carter Fietek. Thermal-Mechanical Elastic-Plastic and Ductile Failure Model Calibrations for 304L Stainless Steel Alloy. Office of Scientific and Technical Information (OSTI), February 2021. http://dx.doi.org/10.2172/1769256.
Повний текст джерелаCorona, Edmundo, Sharlotte Kramer, Brian Lester, Amanda Jones, Brett Sanborn, and Carter Fietek. Thermal-Mechanical Elastic-Plastic and Ductile Failure Model Calibrations for 6061-T651 Aluminum Alloy from Plate. Office of Scientific and Technical Information (OSTI), March 2021. http://dx.doi.org/10.2172/1772885.
Повний текст джерелаRushton, J. D., G. L. Jones, E. L. Leaver, and W. Morton. Development and demonstration of the use of modular thermo-mechanical pulpmill simulation models to develop energy reduction strategies. Office of Scientific and Technical Information (OSTI), August 1991. http://dx.doi.org/10.2172/5166816.
Повний текст джерелаBerge, P. A., S. C. Blair, R. J. Shaffer, and H. F. Wang. Evaluation of models for estimating changes in fracture permeability due to thermo-mechanical stresses in host rock surrounding a potential repository. Office of Scientific and Technical Information (OSTI), February 1997. http://dx.doi.org/10.2172/3844.
Повний текст джерелаКів, Арнольд Юхимович, Володимир Миколайович Соловйов та Sergey A. Tomilin. Formation of Si precipitates іn neutron irradiated Al. Видавничий відділ КДПУ, 2001. http://dx.doi.org/10.31812/0564/1027.
Повний текст джерелаRoberson, Madeleine, Kathleen Inman, Ashley Carey, Isaac Howard, and Jameson Shannon. Probabilistic neural networks that predict compressive strength of high strength concrete in mass placements using thermal history. Engineer Research and Development Center (U.S.), June 2022. http://dx.doi.org/10.21079/11681/44483.
Повний текст джерелаHosemann, Peter, Julie Tucker, and David Cahill. Developing a Macro-scale SiC-cladding Behavior Model Based on Localized Mechanical and Thermal Property Evaluation on Pre- and Post-Irradiation SiC-SiC Composites (Final Report). Office of Scientific and Technical Information (OSTI), March 2019. http://dx.doi.org/10.2172/1523193.
Повний текст джерелаMohanty, Subhasish, and Joseph Listwan. Development of Digital Twin Predictive Model for PWR Components: Updates on Multi Times Series Temperature Prediction Using Recurrent Neural Network, DMW Fatigue Tests, System Level Thermal-Mechanical-Stress Analysis. Office of Scientific and Technical Information (OSTI), September 2021. http://dx.doi.org/10.2172/1822853.
Повний текст джерелаBuscheck, T. ,. LLNL. Thermal-hydrological models. Office of Scientific and Technical Information (OSTI), April 1998. http://dx.doi.org/10.2172/654332.
Повний текст джерела