Дисертації з теми "Supraconducteurs massifs"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-17 дисертацій для дослідження на тему "Supraconducteurs massifs".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Pavard, Sybille. "Texturation de massifs supraconducteurs Bi2Sr2CaCu2O(8+x) avec ajout de MgO." Université Joseph Fourier (Grenoble), 1999. http://www.theses.fr/1999GRE10029.
Повний текст джерелаguilmeau, emmanuel. "Optimisation des propriétés anisotropes d'échantillons massifs supraconducteurs Bi2223 texturés par frittage-forgeage." Phd thesis, Université de Caen, 2003. http://tel.archives-ouvertes.fr/tel-00009361.
Повний текст джерелаGuilmeau, Emmanuel. "Optimisation des propriétés anisotropes d'échantillons massifs supraconducteurs Bi2223 texturés par frittage-forgeage." Caen, 2003. http://www.theses.fr/2003CAEN2049.
Повний текст джерелаVillaume, Alain. "Imagerie Magnéto Optique pour les matériaux supraconducteurs." Phd thesis, Université Joseph Fourier (Grenoble), 2006. http://tel.archives-ouvertes.fr/tel-00087773.
Повний текст джерелаLes études MO ont notamment porté sur les matériaux supraconducteurs à haute température critique élaborés ou étudiés au CNRS-CRETA et laboratoire de Cristallographie. En particulier, un dispositif de texturation par défilement sous champ magnétique de rubans multifilamentaires de Bi2212 a été mis au point. Connaître précisément les conditions de texturation pour chaque échantillon permet en effet de mieux interpréter les données issues des caractérisations, et notamment les images MO. Nous avons pu mettre en évidence par des obervations MO que la texturation sous champ magnétique améliore le piégeage et la texture des filaments, notamment ceux situés au centre des rubans. Par ailleurs le courant critique mesuré à 4,2K est augmenté de 30 à 40\% grâce à la texturation sous champ magnétique.
Dans les massifs YBCO, nous avons mis en évidence grâce aux images MO que l'adaptation du taux d'oxygène dans l'atmosphère du four lors des phases de montée et descente en température est cruciale pour l'obtention d'un dopage homogène en oxygène. L'étude effectuée grâce à l'imagerie MO a par ailleurs révélé que le perçage d'un réseau de trous permet une amélioration significative de la qualité de la texture et de la densité locale de courant critique.
Les Coated Conductors fournis par Theva$^{\copyright}$ ont également fait l'objet d'études MO. Des défauts spécifiques, en forme d'étoiles et dus à la délamination de la couche tampon de MgO ont pu être observés. Les observations MO sous contrainte axiale in situ ont révélé que le courant critique était limité par l'apparition de bandes de contraction (Lüders Bands) dans le substrat, induisant des fissures dans les couches tampon et supraconductrice. Ces fissures ont été observées pour la première fois en MO au cours de cette thèse. L'imagerie MO a également permis de mettre en évidence la présence de fissures horizontales dues à la compression latérale de la couche MgO.
Enfin des mesures en courant de transport de films minces ont été effectuées en parallèle avec des observations MO. Il apparaît que les défauts créés artificiellement par lithographie n'entraînent pas une différence mesurable sur la densité de courant critique (bien que la densité de courant locale dépasse le Jc), mais plutôt une augmentation de la résistivité de flux flow ou de flux creep. Ce travail a été consacré à la réalisation et l'utilisation d'un dispositif d'imagerie Magnéto-Optique (MO) pour l'étude des matériaux supraconducteurs. La principale originalité de ce dispositif est de permettre des mesures sous courant de transport (30A), sous champ magnétique (jusqu'à 100mT), et/ou sous contrainte axiale (80kg maximum).
Les études MO ont notamment porté sur les matériaux supraconducteurs à haute température critique élaborés ou étudiés au CNRS-CRETA et laboratoire de Cristallographie. En particulier, un dispositif de texturation par défilement sous champ magnétique de rubans multifilamentaires de Bi2212 a été mis au point. Connaître précisément les conditions de texturation pour chaque échantillon permet en effet de mieux interpréter les données issues des caractérisations, et notamment les images MO. Nous avons pu mettre en évidence par des obervations MO que la texturation sous champ magnétique améliore le piégeage et la texture des filaments, notamment ceux situés au centre des rubans. Par ailleurs le courant critique mesuré à 4,2K est augmenté de 30 à 40\% grâce à la texturation sous champ magnétique.
Dans les massifs YBCO, nous avons mis en évidence grâce aux images MO que l'adaptation du taux d'oxygène dans l'atmosphère du four lors des phases de montée et descente en température est cruciale pour l'obtention d'un dopage homogène en oxygène. L'étude effectuée grâce à l'imagerie MO a par ailleurs révélé que le perçage d'un réseau de trous permet une amélioration significative de la qualité de la texture et de la densité locale de courant critique.
Les Coated Conductors fournis par Theva$^{\copyright}$ ont également fait l'objet d'études MO. Des défauts spécifiques, en forme d'étoiles et dus à la délamination de la couche tampon de MgO ont pu être observés. Les observations MO sous contrainte axiale in situ ont révélé que le courant critique était limité par l'apparition de bandes de contraction (Lüders Bands) dans le substrat, induisant des fissures dans les couches tampon et supraconductrice. Ces fissures ont été observées pour la première fois en MO au cours de cette thèse. L'imagerie MO a également permis de mettre en évidence la présence de fissures horizontales dues à la compression latérale de la couche MgO.
Enfin des mesures en courant de transport de films minces ont été effectuées en parallèle avec des observations MO. Il apparaît que les défauts créés artificiellement par lithographie n'entraînent pas une différence mesurable sur la densité de courant critique (bien que la densité de courant locale dépasse le Jc), mais plutôt une augmentation de la résistivité de flux flow ou de flux creep.
Kapek, Jakub. "Modélisations 2D et 3D, conception et réalisation d’un inducteur pour aimanter un ensemble de pastilles supraconductrices." Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0113.
Повний текст джерелаToday, superconductors are used in many applications, for example in cables, motors, alternators or for the generation of strong magnetic fields. Superconductors are available as tapes, wires or bulk materials. The process of magnetising superconductors results in bulk superconductors with a much higher trapped magnetic field than conventional permanent magnets. Proper magnetisation is the key to a very strong trapped magnetic field. The work developed in this thesis concerns the 2D and 3D modelling, design and realisation of an inductor to magnetise a set of superconducting pellets. Generally speaking, there are three techniques for magnetising superconductors: Zero Field Cooling (ZFC), Field Cooling (FC) and Pulsed Field Magnetization (PFM). We focus on PFM because it is a more compact and less expensive solution compared to the other techniques. The mentioned magnetisation process and all the phenomena involved have been solved based on the Finite Element Method (FEM) and using different formulations. In this work, we studied and compared in 2D and 3D the A-formulation, the H-formulation and an A-H formulation by coupling the different variables on the material boundaries. The comparison showed the advantages of the A-H formulation in modelling superconducting problems. Indeed, in some cases, we have shown that the use of the A-H formulation allows to reduce the simulation time. The model developed from this formulation is therefore an interesting tool for future dimensioning work and the development of superconductor applications at GREEN laboratory. We have also dimensioned and numerically studied a complete inductor model allowing one or more superconductors to be magnetised simultaneously. We study two configurations: prototype I for magnetising a single superconductor (2D problem) and prototype II for magnetising three superconductors (3D problem). Both configurations are solved by considering the electromagnetic and thermal phenomena as well as the coupling with the circuit equations feeding the inductor. The simulations showed that the temperature rise in the superconductor of about 10 Kelvin generated during the PFM magnetisation affected the trapped magnetic field. It was observed that the presence of one or more superconducting bulks did not affect the current pulse in the inductor. The maximum trapped field obtained numerically for prototype I was 706 mT and 736 mT for prototype II. The results obtained were then compared with the simulation results. However, some of the superconductors exhibited strong inhomogeneity in their properties, which resulted in a reduction in the experimentally observed trapped magnetic field. Hypotheses were made to try to reproduce numerically these inhomogeneities and their effects. However, this numerical calculation can only be done by 3D modelling without the possibility of using symmetries, and leads to a calculation time of up to several days. Experimentation with prototypes resulted in a maximum trapped magnetic field of 686 mT when one pellet was magnetised, while it was 606 mT when several pellets were magnetised simultaneously. Lowering the temperature by using another cryogenic fluid such as liquid hydrogen or another cooling system would increase this trapped magnetic field value to much higher values for the targeted electrical engineering applications
Grira, Sarra Esling Claude. "Microstructure, texture et propriétés supraconductrices d'oxydes supraconducteurs haute température critique SHTc YBCO couches minces et NBCO and YBCO massifs /." Metz : Université de Metz, 2009. ftp://ftp.scd.univ-metz.fr/pub/Theses/2009/Grira.Sarra.SMZ0905.pdf.
Повний текст джерелаThèse soutenue en co-tutelle. Titre provenant de l'écran-titre. Notes bibliographiques. Index.
Masson, Philippe. "Étude d'écrans supraconducteurs à haute température critique massifs. Application à la réalisation d'une machine électrique de conception originale." Phd thesis, Université Henri Poincaré - Nancy I, 2002. http://tel.archives-ouvertes.fr/tel-00119753.
Повний текст джерелаde calcul que nous avons minimisé en appliquant une méthode de régularisation. Nous avons dimensionné et réalisé un inducteur modèle qui a ainsi permis de vérifier l'efficacité de la structure ainsi que les outils de calcul développés.
Masson, Philippe. "Etude d'écrans supraconducteurs à haute température critique massifs : application à la réalisation d'une machine électrique de conception originale." Nancy 1, 2002. http://www.theses.fr/2002NAN10274.
Повний текст джерелаAfter a zero magnetic field cooling, high temperature superconductors are able to expel the flux lines out of their volume. We propose to use this property to make an inductor for electrical motors using superconducting shields to concentrate the flux density. As the theoretical study of this system requires the use of numerical calculation, we have developed a 3D magnetic field calculation tool based on a Markov chain Monte-Carlo method. This probabilistic method leads to a quantifiable error of calculation that we have minimized by using a signal regularization method. We have made the design of an inductor and have realized it. Thus, we have verified the efficiency of the structure and the efficiency of the calculation tools developed
Nouailhetas, Quentin. "Synthesis, Characterization and Comparison of New Bulk Superconductors." Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0269.
Повний текст джерелаSuperconducting materials have already been used in my applications such as MRI, particle accelerators TOKAMAKS or superconducting cables. With this, new projects are under development, such as superconducting electrical motors or magnetic shielding which could involve superconducting bulks as permanent magnets or magnetic shields. In this way, this Ph.D. is focused on the synthesis, characterization and comparison of the different superconducting bulks such as Iron-based or cuprates. Classic furnace sintering and Spark Plasma Sintering processes have been used on Iron-Selenide superconductors to optimize their superconducting properties and phase purity. Characterizations of the superconducting and material properties of the synthesized superconductors have been carried out as well as on other materials like REBaCuO (Rare Earth, Barium, Copper oxide) superconductors. Different characterization techniques are presented like magnetometry with a MPMS-SQUID (Magnetic Property Measurement System, Superconducting Quantum Interference Device), trapped field cartography, X-ray diffraction and Scanning electron or optical microscopy. I also had the occasion to characterize the superconducting properties of Infiltration Growth YBaCuO bulks using cantilever magnetometry with magnetic fields up to 33 T. With this, a comparison of the measured properties with other superconducting materials is done to determine the readiness of those materials concerning electrical engineering and their competitiveness compared to other well-developed materials such as Melt Growth YBaCUO bulks
Dupendant, Hervé. "Contribution à l'étude de quelques aspects des nouveaux oxydes supraconducteurs : mise au point d'une enceinte d'élaboration de couches minces par ablation laser ; interaction magnétisme-supraconductivité dans certains composés massifs de la famille La2CuO4." Grenoble 1, 1991. http://www.theses.fr/1991GRE10042.
Повний текст джерелаMalé, Gaël. "Étude d'une structure d'inducteur supraconducteur à modulation de champ magnétique." Electronic Thesis or Diss., Université de Lorraine, 2012. http://www.theses.fr/2012LORR0133.
Повний текст джерелаIn the electrical engineering, especially in electric motors, one of the main challenges in the coming years is the increased of mass power and mass torque. A synchronous motor operates by the interaction of two magnetic fields. An inductor supplied with direct current creates a variable magnetic field in space. The armature produces a rotating field by a three-phase winding. The electromagnetic torque generated depends from the product of tangential field (Ht) by the radial field (Bn). The torque can be increased by acting on Ht (produced by the armature) or by acting on Bn (produced by the inductor). The inductor consists of two superconducting solenoids fed by opposed currents which create a huge magnetic induction. By using superconducting bulks which present magnetic screening property, we modulate this field. So, this spatial variation of induction generates a mechanical torque. Indeed, in a conventional engine, the amplitude of induction in the gap is around 2 Tesla (Tesla from -1 to 1 Tesla). Superconducting materials can exceed these levels of magnetic induction. This structure offers the possibility to increase this value and therefore to increase the torque in the same proportions and to present a technological leap. The application area is embedded engines for power between several MW and more. However, a technological limit is the possibility of making large superconducting screens for an inductor of large motors (eg a few tens of MW)
Malé, Gaël. "Étude d'une structure d'inducteur supraconducteur à modulation de champ magnétique." Thesis, Université de Lorraine, 2012. http://www.theses.fr/2012LORR0133/document.
Повний текст джерелаIn the electrical engineering, especially in electric motors, one of the main challenges in the coming years is the increased of mass power and mass torque. A synchronous motor operates by the interaction of two magnetic fields. An inductor supplied with direct current creates a variable magnetic field in space. The armature produces a rotating field by a three-phase winding. The electromagnetic torque generated depends from the product of tangential field (Ht) by the radial field (Bn). The torque can be increased by acting on Ht (produced by the armature) or by acting on Bn (produced by the inductor). The inductor consists of two superconducting solenoids fed by opposed currents which create a huge magnetic induction. By using superconducting bulks which present magnetic screening property, we modulate this field. So, this spatial variation of induction generates a mechanical torque. Indeed, in a conventional engine, the amplitude of induction in the gap is around 2 Tesla (Tesla from -1 to 1 Tesla). Superconducting materials can exceed these levels of magnetic induction. This structure offers the possibility to increase this value and therefore to increase the torque in the same proportions and to present a technological leap. The application area is embedded engines for power between several MW and more. However, a technological limit is the possibility of making large superconducting screens for an inductor of large motors (eg a few tens of MW)
Berling, Dominique. "Influence des techniques de fabrication sur quelques propriétés des oxydes supraconducteurs en couches minces et à l'état massif." Mulhouse, 1996. http://www.theses.fr/1996MULH0497.
Повний текст джерелаMASSIOT, PHILIPPE. "ETUDE DE L'HALOGENATION DU SUPRACONDUCTEUR YBa2Cu3O7-delta L'ETAT DE MATERIAU MASSIF OU SOUS FORME DE COUCHE MINCE." Rennes 1, 1998. http://www.theses.fr/1998REN10181.
Повний текст джерелаSANFILIPPO, STEPHANE. "Effets des plans de macles sur les propriétés physiques du supraconducteur YBa2Cu3O(7-(delta) : étude sur des échantillons massifs texturés monodomaines." Université Joseph Fourier (Grenoble), 1997. http://www.theses.fr/1997GRE10300.
Повний текст джерелаCao, Haitao. "Etude des mécanismes de préparation par infiltration croissance assité par germe de massif supraconducteur à haute température YBCO monodomaine." Caen, 2010. http://www.theses.fr/2010CAEN2045.
Повний текст джерелаThe enormous passion related to the superconducting materials can be clearly reflected by the number of Nobel Prize conferred on this field. The potential applications are electrical cables, the medical imagery. . . Since the discovery of the high temperature superconductors in 1987; their principal quality lies in the fact that they display the superconducting properties at liquid nitrogen temperature. In the framework of this study, the Seeded Infiltration Growth (SIG) process has been developed to texture the YBa2Cu3O7-. The goal of this process is (i) to prepare the single domain bulk superconducting materials, (ii) to avoid the doping agents and (iii) to overcome the cracks usually appearing in the case of the conventional Melt-Textured-Growth (MTG) due to the liquid phase loss. The optimization of the process consisted in understanding the mechanisms of infiltration and growth by using the magnetic susceptibility measurements (MSM) at high temperature and in-situ video observations of single domain formation. This investigation offers the opportunity to verify the main phase transition and to determine the melting point and solidification window of SIG process. Finally, the heat treatment was adjusted and allows to obtain the single domain YBa2Cu3O7-. The search of the suitable configuration and the chemical formula giving the high performance samples was undertaken. The single domain superconductors processed have the critical currents densities close to 9,5. 104 A/cm2 at 77K and up to 2,5. 105 A/cm2 at 40 K under self field reproducibly
Fawaz, Hala. "Etude de l'impédence de surface, à 10 GHz, du supraconducteur à haute Tc YBa2 Cu3 O7 massif. Influence d'un champ magnétique continu ou modulé." Aix-Marseille 1, 1993. http://www.theses.fr/1993AIX11009.
Повний текст джерела