Добірка наукової літератури з теми "Sulfuric material"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Sulfuric material".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Sulfuric material"
Hyk, Wojciech, Konrad Kitka, and Dariusz Rudnicki. "Selective Recovery of Zinc from Metallurgical Waste Materials from Processing Zinc and Lead Ores." Molecules 24, no. 12 (June 19, 2019): 2275. http://dx.doi.org/10.3390/molecules24122275.
Повний текст джерелаAmirabad, Morteza Mirzaei, Alireza Mirzaei Amirabad, Jafar Khodagholizadeh, and Ali Akbar Naeimi. "Producing Hydrogen through Electrolysis." Applied Mechanics and Materials 110-116 (October 2011): 2296–300. http://dx.doi.org/10.4028/www.scientific.net/amm.110-116.2296.
Повний текст джерелаIvan, Eliansion, and Hindriyanto Dwi Purnomo. "FORECASTING PRICES OF FERTILIZER RAW MATERIALS USING LONG SHORT TERM MEMORY." Jurnal Teknik Informatika (Jutif) 3, no. 6 (December 26, 2022): 1663–73. http://dx.doi.org/10.20884/1.jutif.2022.3.6.433.
Повний текст джерелаQiu, Chuan, Xian Zheng Gong, Wen Juan Chen, Zhi Hong Wang, Feng Gao, and Xiao Qing Li. "Materials Flows Analysis on the Beneficiation and Roasting Processes of a Typical Rare Earth Mineral." Materials Science Forum 847 (March 2016): 352–57. http://dx.doi.org/10.4028/www.scientific.net/msf.847.352.
Повний текст джерелаReynosa-Martínez, Ana Cecilia, Erika Gómez-Chayres, Rafael Villaurrutia, and Eddie López-Honorato. "Controlled Reduction of Graphene Oxide Using Sulfuric Acid." Materials 14, no. 1 (December 25, 2020): 59. http://dx.doi.org/10.3390/ma14010059.
Повний текст джерелаTrushkova, Ekaterina, Elena Omelchenko, and Mikhail Sidelnikov. "Improvement of environmental indicators of coal energy and agricultural production due to the integration and diversification of these industries." E3S Web of Conferences 217 (2020): 04008. http://dx.doi.org/10.1051/e3sconf/202021704008.
Повний текст джерелаLi, Yong Li, Li Ping Mao, Cai Feng Xu, and Shi You Li. "A Preliminary Study of the Carbon-Based Solid Acid Preparation Process." Advanced Materials Research 734-737 (August 2013): 2236–39. http://dx.doi.org/10.4028/www.scientific.net/amr.734-737.2236.
Повний текст джерелаSultana, Sujala T., and M. Ruhul Amin. "Aspen-Hysys Simulation Of Sulfuric Acid Plant." Journal of Chemical Engineering 26 (March 24, 2012): 47–49. http://dx.doi.org/10.3329/jce.v26i1.10182.
Повний текст джерелаÁlvarez, María Luisa, José Manuel Fidalgo, Gabriel Gascó, and Ana Méndez. "Hydrometallurgical Recovery of Cu and Zn from a Complex Sulfide Mineral by Fe3+/H2SO4 Leaching in the Presence of Carbon-Based Materials." Metals 11, no. 2 (February 6, 2021): 286. http://dx.doi.org/10.3390/met11020286.
Повний текст джерелаNisah, Khairun. "EKSTRAKSI ALUMINA OKSIDA ( Al2O3) DARI TANAH LIAT DENGAN VARIABEL SUHU DAN KONSENTRASI ASAM SULFAT." Lantanida Journal 4, no. 1 (September 15, 2017): 1. http://dx.doi.org/10.22373/lj.v4i1.1833.
Повний текст джерелаДисертації з теми "Sulfuric material"
OLIVEIRA, THAIS de. "Recuperacao e reciclagem dos acidos nitrico e sulfurico e do molibdenio dos residuos liquidos das industrias de lampadas." reponame:Repositório Institucional do IPEN, 2009. http://repositorio.ipen.br:8080/xmlui/handle/123456789/9554.
Повний текст джерелаMade available in DSpace on 2014-10-09T14:00:54Z (GMT). No. of bitstreams: 0
Dissertacao (Mestrado)
IPEN/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP
Peck, Michael S. "Materials study supporting thermochemical hydrogen cycle sulfuric acid decomposer design." Diss., Columbia, Mo. : University of Missouri-Columbia, 2007. http://hdl.handle.net/10355/4860.
Повний текст джерелаThe entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed Feb. 27, 2008). Vita. Includes bibliographical references.
Ling, Yuanbing 1970. "Direct preparation of alpha-calcium sulfate hemihydrate from sulfuric acid." Thesis, McGill University, 2003. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=84283.
Повний текст джерелаFor the standard preparation procedure of adding lime into hot sulfuric acid, alpha-hemihydrate grows in the c-axis direction much more rapidly than in other directions ending in the form of fine needle crystals. Also, independent of the shape of the seed particles, the resultant crystals of hemihydrate are needle-shaped, which suggests a "dissolution-recrystallization" mechanism. Upon prolonged equilibration in their acid-preparation solution hemihydrate needle-shape crystals become fibrous and eventually convert to anhydrite. It is believed that uptake of SO42- instead of Ca2+ is the rate-determining step in the hemihydrate crystallization process. The hot SO42--rich environment rendered most of the additives (particularly organic) tried ineffective. Trivalent cations such as Fe3+ and Al3+, are the only ones found to modify the crystal morphology from needle-shape to small "grain" type morphology.
Slow addition of H2SO4 solution to slaked lime - reverse procedure was found to favor the production of alpha-hemihydrate with column-shaped as opposed to needle-shaped crystal morphology within otherwise the same operating window, 0.6--1.1M H2SO4. Preliminary assessment of the properties of the alpha-hemihydrate materials synthesized in this work showed them to compare satisfactorily with other materials produced by conversion of dihydrate to hemihydrate.
King, Matthew Joseph. "Control and optimization of metallurgical sulfuric acid plants." Diss., The University of Arizona, 1999. http://hdl.handle.net/10150/284812.
Повний текст джерелаRigual, David Andrés. "Metallurgical characterization of self catalytic structural materials for sulfuric acid decomposition." Thesis, Massachusetts Institute of Technology, 2005. http://hdl.handle.net/1721.1/34654.
Повний текст джерелаIncludes bibliographical references (p. 276-279).
Eight heats of material with base alloy chemistries of Alloys 800 HT or 617 with platinum additions of 2, 5, 15, or 30 wt% have been characterized according to their microstructural features. The goals of characterization were to determine metallurgical stability for service as self-catalytic structural materials. The results presented herein will be useful to the development of a material for the construction of a heat exchanger designed for sulfuric acid decomposition. This type of heat exchanger is a key component to hydrogen generation by the thermochemical sulfur-iodine water-splitting process, a future technology that promises efficient hydrogen production if coupled to a Generation IV nuclear reactor heat source. Characterization of each material was carried out in the cast and wrought conditions with optical and SE microscopy, electron dispersive spectrometry, chemical composition analysis, and thermodynamic modeling. Materials have been characterized according to grain size and morphology, precipitate features, twinning characteristics, and platinum composition effects. Results indicate that platinum and carbon compositions have the greatest effect on the development of microstructural features.
(cont.) Increasing platinum compositions in both base alloy chemistries fosters the presence of annealing twins, which indicates that platinum additions reduce stacking fault energy within the alloy systems. Platinum additions appear to cause the development of larger grain structures as well as increase corrosion resistance. With the exception of the Alloy 800 HT - 30 wt% Pt system, the alloy systems characterized herein were melted with carbon contents between 1.2 - 3.6 times higher than the maximum specified compositions for the base chemistries. Excessive inter and intra-granular carbide precipitation resulted, which leads to compromised corrosion resistance and mechanical properties. Inter-granular attack due to sensitization is observed in the Alloy 800 HT - 2, 5 wt% Pt systems. SEM micrographs of the Alloy 617 - Pt systems show that these systems are less prone to inter-granular attack. The grain structures of each base alloy - Pt system are much finer than those of the respective base alloy systems included for comparison. Fine grain structures are detrimental to overall ductility and high temperature creep strength. On average, the Alloy 800 HT - Pt systems developed larger grains than the Alloy 617 - Pt systems.
(cont.) A two phase microstructure that resembles pearlite developed in the Alloy 617 - 30 wt% Pt system. This alloy system will be excluded from further characterization for self catalytic structural application due to expected poor mechanical and corrosion resistance properties. The most important microstructural improvements for the development of a self-catalytic structural material include a reduction of carbon content and an increase in grain size. Further characterization of catalytic, corrosion resistance, and mechanical properties are required for selection of the optimum platinum addition to the base chemistries of Alloys 800 HT and 617 for sulfuric acid decomposition service.
by David Andrés Rigual.
S.M.
Hao, Yong. "Sulfur Based Electrode Materials For Secondary Batteries." FIU Digital Commons, 2016. http://digitalcommons.fiu.edu/etd/2582.
Повний текст джерелаPreuss, Kathryn Elvia. "Sulfur nitrogen heterocycles as charge transfer materials." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape3/PQDD_0018/NQ53510.pdf.
Повний текст джерелаMakenya, Amon Raphael. "Industrial application of sulfur concrete : an environment-friendly construction material /." Stockholm, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3239.
Повний текст джерелаLEMOS, Janyelle de Oliveira. "Caracterização de gleissolos com e sem tiomorfismo da região litorânea do estado de Pernambuco." Universidade Federal Rural de Pernambuco, 2013. http://www.tede2.ufrpe.br:8080/tede2/handle/tede2/5147.
Повний текст джерелаMade available in DSpace on 2016-08-02T11:57:56Z (GMT). No. of bitstreams: 1 Janyelle de Oliveira Lemos.pdf: 3894911 bytes, checksum: 9f9b7d66408b0015fd2de9373d685881 (MD5) Previous issue date: 2013-06-17
The floodplain soils of Pernambuco state - Brazil have been widely used to agriculture and their improperly management has promoted, in those with sulphidric materials, the sulfurization process, generating acidity in the soil, and release of heavy metals such iron. The aim of this study was to characterize Gleysol in areas of coastal wetlands along the shoreline of Pernambuco state cultivated with sugar cane, trying to understand genesis and occurrence of acid sulphate soils. Thus, we studied three floodplain soils along the shoreline of Pernambuco: floodplain soil in Goiana river (profile 1), floodplain soils in Sirinhaém river (profiles 2, 3 and 4) and floodplain soils in Ipojuca river (profiles 5, 6 and 7). Were realized a morphological characterization of soils, chemical analyzes for the purpose of soil classification, sequential extraction and total content of iron, and mineralogical analysis using XRD. Was observed predominance of the clay fraction in all profiles, which is consistent with the depositional environment in waters with low kinetic energy. The profiles 2, 3 and 4 showed extremely acidic reaction, with pH values below 2.5, indicating the presence of sulfuric horizon. The presence of sulphidric materials in the profiles 2, 3 and 4, confirmed the presence of sulfuric horizon. The sulfuric horizons in the profiles 2, 3 and 4 had high EC values between 9 and 21 dS m-1, being consistent with the high concentrations of sulphate generated by sulfurization process. The higher levels of iron were found associated with forms of poorly crystalline oxyhydroxides, values between 0.03 and 1.56 mmol kg-1. The assembly mineralogical soil had become very influenced by the geology of the basin of the rivers that bathe the floodplains. In the clay fraction were identified illite, kaolinite, goethite and smectite (beidellite/montmorillonite and nontronite), the silt fraction were: Illite, kaolinite, quartz and feldspar, in the sand fraction were: quartz, feldspar, mica and kaolinite. The floodplain soils showed morphological, physical, chemical and mineralogical related to the origin of the sediments and their position in the landscape. The occurrence of acid sulphate soils was detected only in the floodplain of Sirinhaem river.
Os solos de várzeas do litoral Pernambucano têm sido bastante utilizados na agricultura e o seu manejo inadequado tem promovido, naqueles que apresentam materiais sulfídricos, o processo de sulfurização, gerando acidez no solo, além de liberação de metais a exemplo do ferro. O objetivo deste trabalho foi caracterizar Gleissolos em áreas de várzeas litorâneas ao longo do litoral Pernambucano cultivadas com cana-de-açúcar, buscando compreender sua gênese e a ocorrência de solos Tiomórficos. Para tanto, foram avaliados solos de três várzeas ao longo do litoral Pernambucano: várzea do rio Goiana (perfil 1), várzea do rio Sirinhaém (perfis 2, 3 e 4) e várzea do rio Ipojuca (perfis 5, 6 e 7). Foi realizada a caracterização morfológica dos solos, análises químicas para fins de classificação do solo, extração sequencial e total do ferro, além de análise mineralógica utilizando DRX. Observou-se predominância da fração argila em todos os perfis, que condiz com o ambiente de deposição em águas com baixa energia cinética. Os perfis 2, 3 e 4 apresentaram reação extremamente ácida, chegando a atingir valores de pH inferiores a 2,5, evidenciando a presença de horizonte sulfúrico. A presença de materiais sulfídricos nos perfis 2, 3 e 4, confirmou a existência de horizonte sulfúrico. Os horizontes sulfúricos dos perfis 2, 3 e 4 apresentaram alta C.E., com valores variando entre 9 e 21 dS m-1, estando condizente com as altas concentrações de sulfato gerado pelo processo de sulfurização. Os maiores teores de ferro foram encontrados associados às formas de oxihidróxidos de baixa cristalinidade, apresentando valores entre 0,03 e 1,56 mmol kg-1. A assembléia mineralógica dos solos apresentou-se bastante influenciada pela geologia da bacia dos rios que banham as várzeas. Na fração argila os minerais identificados foram: ilita, caulinita, goethita e esmectita (beidelita/nontronita e montmorilonita); na fração silte foram: Ilita, caulinita, quartzo e feldspato; na fração areia foram: quartzo, feldspato, mica e caulinita. Os solos de várzeas apresentaram propriedades morfológicas, física, químicas e mineralógicas relacionadas à origem dos sedimentos e sua posição na paisagem. A ocorrência de Gleissolos Tiomórficos foi constatada somente na várzea do rio Sirinhaém.
Wang, Dunyang. "Fundamental Studies of Lithium-sulfur Reaction Intermediates." Thesis, University of California, Berkeley, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10930612.
Повний текст джерелаLithium-sulfur (Li-S) batteries have been considered as an attractive alternative to current Li-ion batteries due to their large theoretical capacity (1672 mA-h/g) and theoretical energy density (2600 Wh/kg) while having a low cost, an abundance of the material, and relatively non-toxic properties. However, the low cyclability and significant capacity fading during the first several cycles prevent Li-S rechargeable batteries from being commercialized. During discharge, elemental sulfur is reduced to the final product Li2S through a series of soluble intermediate species, lithium polysulfides (Li2S x, 2 ≤ x ≤ 8). Lithium polysulfides dissolved into the electrolyte in the separator can no longer participate in redox reductions, resulting in a loss of active materials, as well as a “shuttling effect” that causes capacity fading and low coulombic efficiency. Despite the fact that decades of research have attempted to solve this, the problem is still not resolved due to a lack of fundamental understanding of the system. This includes how lithium polysulfides are produced during discharge interactions with other components in the cell and the reaction mechanisms (the electrochemical and chemical processes) during cycling. The objective of this dissertation is to provide a fundamental understanding of lithium polysulfides produced during discharge of a Li-S cell. This is an essential piece of knowledge when designing and identifying the issues associated with Li-S batteries.
To begin, the morphology, thermal properties, and ionic conductivity of an ether-based nanostructured block copolymer containing lithium polysulfides were investigated. Previous work has shown that nanostructured block copolymer electrolytes containing an ion-conducting block and modulus-strengthening block has the potential of enabling solid-state lithium metal rechargeable batteries. This is of particular interest for a lithium-sulfur battery to fully explore its high energy density and capacity. Understanding the thermal and electrochemical properties of these block copolymer electrolytes containing lithium polysulfides is essential for evaluating their potential use in Li-S batteries. A systematic study of polystyrene-b-poly(ethylene oxide) (SEO) block copolymer mixed with Li2Sx with an average x value of 4 and 8 was conducted. Small angle X-ray scattering, differential scanning calorimetry, and ac impedance spectroscopy were used to measure the morphology, thermal properties, and ionic conductivities of all samples. The ionic conductivity of SEO/Li2Sx mixtures were compared with those of poly(ethylene oxide) (PEO) mixed with Li2Sx to quantify the effect of nanostructuring on ion transport. The conductivities of both SEO and PEO samples containing polysulfides with a longer average chain length higher than the same polymer containing polysulfides with a shorter average chain length at all salt concentrations, indicating that dissociation of long-chain polysulfides occurs more readily than short-chain polysulfides. Normalized conductivity was used to quantify the effect of morphology on ion transport. The results showed that SEO suppressed the migration of polysulfides relative to PEO. However, this suppression is inadequate for practical applications. In other words, cathode architectures that prevent polysulfides from entering the electrolyte are necessary for enabling Li-S batteries with block copolymer electrolytes. Nevertheless, the results obtained in this study are important as they enable quantification of polysulfide migration in Li-S batteries with imperfect polysulfide encapsulation, a limitation that applies to all known Li-S batteries.
Next, UV-vis spectroscopy with radiation wavelength in the range 200 - 800 nm was used to study different polysulfides in ether. Ex-situ UV-vis spectra were measured for chemically synthesized lithium polysulfides in TEGDME, Li2 Sx_mix | TEGDME solutions for xmix values of 4, 6, 8, and 10 and sulfur concentrations of 10, 50, and 100 mM. The peaks are generally more resolved at lower concentrations than at higher concentrations for all xmix values, suggesting a concentration dependence of spectra shape. The peak at 617 nm was used to confirm the existence of S3 •- radical anion, which supports the argument that polysulfide radical anions are stable in ether-based electrolytes, and may play an important role in Li-S reaction mechanism. Using in-situ UV-vis method was discussed and challenges for Li-S reaction mechanism study were evaluated. A new fluorinated-ether based electrolyte was explored. Its low polysulfide solubility makes it a good candidate to be used in in-situ Li-S reaction studies because UV-vis radiations do not have a large penetration path through high concentration of polysulfide-containing materials. However, the main challenge in using UV-vis spectroscopy to study Li-S reaction mechanism is the ambiguity in peak assignments arised both from a lack of spectra standards for different polysulfides. It is difficult to experimentally obtain polysulfide spectra standards because polysulfides cannot be separated. (Abstract shortened by ProQuest.)
Книги з теми "Sulfuric material"
McBee, William C. Sulfur construction materials. Washington, D.C: U.S. Dept. of the Interior, Bureau of Mines, 1985.
Знайти повний текст джерелаMcBee, William C. Sulfur construction materials. [Washington, D.C.]: U.S. Dept. of the Interior, Bureau of Mines, 1985.
Знайти повний текст джерелаP, Bennett James. Corrosion resistance of selected ceramic materials to sulfuric acid. [Pittsburgh, Pa.]: U.S. Dept. of the Interior, Bureau of Mines, 1986.
Знайти повний текст джерелаOber, Joyce A. The materials flow of sulfur. Reston, VA: U.S. Dept. of the Interior, U.S. Geological Survey, 2004.
Знайти повний текст джерелаNational Association of Corrosion Engineers. Materials for the handling and storage of concentrated (90 to 100%) sulfuric acid at ambient temperatures. Houston: NACE, 1991.
Знайти повний текст джерелаSteger, Henry F. HCC-1 and INM-1--pyrometallurgical CRMs for sulphur. Ottawa: Energy, Mines and Resources Canada, Canada Centre for Mineral and Energy Technology, 1990.
Знайти повний текст джерелаInternational, Symposium on Present and Future Raw Material and Fertilizer Sulphur Requirements for China (1993 Beijing China). Proceedings of the International Symposium on Present and Future Raw Material and Fertilizer Sulphur Requirements for China: June 15-17, 1993, Beijing, China = [Zhongguo liu zi yuan he liu fei xu qiu de xian zhuang he zhan wang : guo ji xue shu tao lun hui lun wen ji]. [Washington, DC]: The Institute, 1993.
Знайти повний текст джерелаZhou, Guangmin. Design, Fabrication and Electrochemical Performance of Nanostructured Carbon Based Materials for High-Energy Lithium–Sulfur Batteries. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3406-0.
Повний текст джерелаGreat Britain. Standing Committee of Analysts., ed. Determination of sulphite, sulfur dioxide, thiosulphate, and thiocyanate: With notes on the determination of total sulphur and other sulfur compounds, 1985 : methods for the examination of waters and associated materials. London: H.M.S.O., 1987.
Знайти повний текст джерелаInternational, NACE. Petroleum and natural gas industries: Materials for use in H2S-containing environments in oil and gas production = Industries du pe trole et du gaz naturel - Mate riaux pour utilisation dans des environnements contenant de l'hydroge ne sulfure (H2S) dans la production de pe trole et de gaz. 2nd ed. Houston, Tex: NACE, 2009.
Знайти повний текст джерелаЧастини книг з теми "Sulfuric material"
Heider, W., R. Förthmann, and A. Naoumidis. "Corrosion Resistance of SiSiC Tube Material under Thermal Cycling Conditions of a Solar Heated Sulfuric Acid-Iodine Process Plant." In Solar Thermal Energy Utilization. German Studies on Technology and Application, 19–32. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-84799-8_2.
Повний текст джерелаHeider, W., R. Förthmann, and A. Naoumidis. "Corrosion Resistance of SiSiC Tube Material under the Specific Conditions of a Solar Heated Sulfuric Acid-Iodine Process Plant." In Solar Thermal Energy Utilization. German Studies on Technology and Application, 193–215. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-662-09931-5_5.
Повний текст джерелаTsuchiya, Hiroaki, Jan M. Macak, Irina Sieber, and Patrik Schmuki. "Anodic Porous Zirconium Oxide Prepared in Sulfuric Acid Electrolytes." In Materials Science Forum, 205–10. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-996-2.205.
Повний текст джерелаLiu, Zengcai, Wujun Fu, and Chengdu Liang. "Lithium-Sulfur Batteries." In Handbook of Battery Materials, 811–40. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2011. http://dx.doi.org/10.1002/9783527637188.ch24.
Повний текст джерелаGrogan, J., G. M. Martins, and C. G. Anderson. "Dezincing of Galvanized Steel by Sulfuric Acid Leaching." In The Minerals, Metals & Materials Series, 1733–42. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-95022-8_143.
Повний текст джерелаDelong, L. Mark L. "Materials Challenges in Strong Nitric and Sulfuric Acid Service." In ACS Symposium Series, 245–54. Washington, DC: American Chemical Society, 2013. http://dx.doi.org/10.1021/bk-2013-1155.ch016.
Повний текст джерелаRyu, Ho Suk, Cheol Wan Park, Won-Cheol Shin, Tae-Bum Kim, Jai Young Lee, and Hyo Jun Ahn. "Discharge-Charge Property of Lithium/PEO/Sulfur Battery with High Sulfur Content." In Materials Science Forum, 634–37. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-966-0.634.
Повний текст джерелаCao, Y., P. Smith, and A. J. Heeger. "Polyaniune Processed from Sulfuric Acid and in Solution in Sulfuric Acid: Electrical, Optical and Magnetic Properties." In Conjugated Polymeric Materials: Opportunities in Electronics, Optoelectronics, and Molecular Electronics, 171–93. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-2041-5_13.
Повний текст джерелаChoi, Young Jin, Sang Sik Jeong, Ki Won Kim, Hyo Jun Ahn, and Jou Hyeon Ahn. "Effects on the Carbon Matrix as Conductor in Sulfur Electrode for Lithium/Sulfur Battery." In Materials Science Forum, 1082–85. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-995-4.1082.
Повний текст джерелаWang, Zhenhua. "Cathode Materials for Lithium-Sulfur Batteries." In Advanced Electrochemical Materials in Energy Conversion and Storage, 129–44. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003133971-5.
Повний текст джерелаТези доповідей конференцій з теми "Sulfuric material"
Ioka, Ikuo, Yoshiro Kuriki, Jin Iwatsuki, Daisuke Kawai, Yoshiyuki Inagaki, Shinji Kubo, and Yoshiyuki Inagaki. "Corrosion Property of Container Using Hybrid Material for Thermal Decomposition Process of Sulfuric Acid." In 2020 International Conference on Nuclear Engineering collocated with the ASME 2020 Power Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/icone2020-16783.
Повний текст джерелаKim, Hong Pyo, Dong-Jin Kim, Hyuk Chul Kwon, Ji Yeon Park, and Yong Wan Kim. "Corrosion of the Materials in Sulfuric Acid." In Fourth International Topical Meeting on High Temperature Reactor Technology. ASMEDC, 2008. http://dx.doi.org/10.1115/htr2008-58007.
Повний текст джерелаFukui, Hiroshi, Isao Minatsuki, and Kazuo Ishino. "A Development of Ceramics Cylinder Type Sulfuric Acid Decomposer for Thermo-Chemical Iodine-Sulfur Process Pilot Plant." In 14th International Conference on Nuclear Engineering. ASMEDC, 2006. http://dx.doi.org/10.1115/icone14-89705.
Повний текст джерелаSimatupang, Partogi H. "Characteristics of alkali activated material (geopolymer) in sulfuric acid solution." In GREEN CONSTRUCTION AND ENGINEERING EDUCATION FOR SUSTAINABLE FUTURE: Proceedings of the Green Construction and Engineering Education (GCEE) Conference 2017. Author(s), 2017. http://dx.doi.org/10.1063/1.5003511.
Повний текст джерелаHu, Tzu-Yu, Sarah M. Connolly, Edward J. Lahoda, and Willem Kriel. "Design and Cost of the Sulfuric Acid Decomposition Reactor for the Sulfur Based Hydrogen Processes." In Fourth International Topical Meeting on High Temperature Reactor Technology. ASMEDC, 2008. http://dx.doi.org/10.1115/htr2008-58009.
Повний текст джерелаVega-Baudrit, José Roberto, and Melissa Camacho. "Pineapple Biorefinery in Costa Rica." In I Congreso Internacional de Ciencias Exactas y Naturales. Universidad Nacional, 2019. http://dx.doi.org/10.15359/cicen.1.72.
Повний текст джерелаGhosh, Arindam, Venkateswarlu Kondur, and Ajit Kumar Roy. "Tensile Behavior of Nb7.5Ta for Heat-Exchanger Applications." In ASME 2007 Pressure Vessels and Piping Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/pvp2007-26490.
Повний текст джерелаSamoylenko, V. V., M. G. Golkovski, I. S. Ivanchik, I. K. Chakin, and I. A. Polyakov. "Composite material of the Ti-Ta-Zr system intended to work in boiling sulfuric and hydrochloric acids." In 8th International Congress on Energy Fluxes and Radiation Effects. Crossref, 2022. http://dx.doi.org/10.56761/efre2022.n3-o-042501.
Повний текст джерелаSugawara, Sougoro, Zulkarnain A. Noorden, Ryohei Okaoto, and Satoshi Matsumoto. "New carbon material derived from mixture with lubricating oil and sulfuric acid and its electric property for EDLC." In 2012 IEEE International Conference on Condition Monitoring and Diagnosis (CMD). IEEE, 2012. http://dx.doi.org/10.1109/cmd.2012.6416451.
Повний текст джерелаR., Arryan Jibril, Prinanda Doni Santoso, Agus Budi Prasetyo, Ahmad Maksum, Reza Miftahul Ulum, and Johny Wahyuadi Soedarsono. "The effect of leaching time and concentration of sulfuric acid on increasing nickel and cobalt content from ferronickel slag waste after alkaline fusion using sodium carbonate." In INTERNATIONAL CONFERENCE ON TRENDS IN MATERIAL SCIENCE AND INVENTIVE MATERIALS: ICTMIM 2020. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0014051.
Повний текст джерелаЗвіти організацій з теми "Sulfuric material"
Remick, R. J., T. L. Osif, and M. G. Lawson. Sulfur-tolerant anode materials: Final report. Office of Scientific and Technical Information (OSTI), September 1988. http://dx.doi.org/10.2172/5766208.
Повний текст джерелаChriswell, C. D., G. A. Norton, S. S. Akhtar, W. E. Straszheim, and R. Markuszewski. Annotated bibliography of methods for determining sulfur and forms of sulfur in coal and coal-related materials. Office of Scientific and Technical Information (OSTI), January 1993. http://dx.doi.org/10.2172/10189947.
Повний текст джерелаNguyen, D. T. Corrosion resistance and behavior of construction materials exposed to dilute sulfuric acid at elevated temperatures under static conditions. Office of Scientific and Technical Information (OSTI), October 1994. http://dx.doi.org/10.2172/10190293.
Повний текст джерелаKim, Do Heui, George G. Muntean, Charles H. F. Peden, Ken Howden, Randy Stafford, John Stang, Aleksey Yezerets, Neal Currier, H. Y. Chen, and H. Hess. CRADA Final Report: Mechanisms of Sulfur Poisoning of NOx Adsorber Materials. Office of Scientific and Technical Information (OSTI), March 2009. http://dx.doi.org/10.2172/1334911.
Повний текст джерелаKolodziejczyk, Bart. Unsettled Issues Concerning the Use of Green Ammonia Fuel in Ground Vehicles. SAE International, February 2021. http://dx.doi.org/10.4271/epr2021003.
Повний текст джерелаBannochie, C. J., and B. J. Wiedenman. Examination Of Sulfur Measurements In DWPF Sludge Slurry And SRAT Product Materials. Office of Scientific and Technical Information (OSTI), November 2012. http://dx.doi.org/10.2172/1057005.
Повний текст джерелаVetter, Thomas W. Certification of Standard Reference Material® 2693a Bituminous Coal (Nominal Mass Fraction 0.5 % Sulfur). Gaithersburg, MD: National Institute of Standards and Technology, 2022. http://dx.doi.org/10.6028/nist.sp.260-230.
Повний текст джерелаVetter, Thomas W. Certification of Standard Reference Material® 2693a Bituminous Coal (Nominal Mass Fraction 0.5 % Sulfur). Gaithersburg, MD: National Institute of Standards and Technology, 2022. http://dx.doi.org/10.6028/nist.sp.260.230.
Повний текст джерелаKingston, A. W., O. H. Ardakani, G. Scheffer, M. Nightingale, C. Hubert, and B. Meyer. The subsurface sulfur system following hydraulic stimulation of unconventional hydrocarbon reservoirs: assessing anthropogenic influences on microbial sulfate reduction in the deep subsurface, Alberta. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/330712.
Повний текст джерелаDewitt, J. X-Ray Absorption Spectroscopic Studies of the Dinuclear Iron Center in Methane Monooxygenase and the Sulfure and Chlorine Centers in Photographic Materials. Office of Scientific and Technical Information (OSTI), June 2018. http://dx.doi.org/10.2172/1454092.
Повний текст джерела