Готові списки джерел за темами / Stone, Crushed Additives

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій

Добірка наукової літератури з теми "Stone, Crushed Additives"

Автор: Grafiati

Опубліковано: 10 грудня 2022

Оновлено: 29 січня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Stone, Crushed Additives".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Stone, Crushed Additives"

Kroviakov, S. O., A. O. Chystiakov, А. О. Bershadskyi, and T. Shevchenko. "CONCRETES ON SECONDARY CRUSHED STONE AS A PROMISING MATERIAL FOR THE RIGID PAVEMENT BASE." Bulletin of Odessa State Academy of Civil Engineering and Architecture, no. 87 (June 3, 2022): 85–91. http://dx.doi.org/10.31650/2415-377x-2022-87-85-91.

Повний текст джерела

Анотація:

In the course of research, the efficiency of application of plasticizers of different type in concretes for bases of highways on secondary crushed stone is defined. In studies of concrete compositions, the type of crushed stone, secondary or granite, changed, which allowed to compare the properties of concrete on secondary crushed stone with the properties of concrete of similar composition on granite crushed stone. In addition, the type of sand changed: Bilyaevsky or Voznesenski quarry. As modifiers used additive lignosulfonate or superplasticizer polycarboxylate type MC-PowerFlow 3200. All concrete mixtures had equal mobility P2, which was provided by variation W/C (water-cement ratio). It was found that the concrete on the secondary crushed stone is characterized by a significantly higher W/C mixture due to greater porosity and damage to the surface of the coarse aggregate. The average density of concrete on secondary crushed stone is 4.2-4.4% lower compared to the average density of concrete on granite crushed stone. The average density of concrete on the larger sand of the Voznesenski quarry is 25-30 kg/m3 higher than the average density of concrete on similar gravel and finer sand of the Bilyaevsky quarry. In composites based on CEM III/A and using lingosulfonate additives, the compressive strength of concrete on secondary crushed stone is 12-13% lower compared to the strength of concrete on granite crushed stone and similar sand. However, when using the more efficient MC-PowerFlow 3200 additive, the difference in concrete strength on secondary and granite crushed stone is only 5.4% (29.8 MPa and 31.4 MPa, respectively). The strength of concrete on the sand of the Voznesenski quarry is 4-6% higher than the strength of concrete on similar gravel and finer sand of the Bilyaevsky quarry. It was found that the tensile strength when bending concrete on secondary and granite gravel when using the additive MC-PowerFlow 3200 was 2.75 MPa and 2.87 MPa, respectively, which differs by only 4%. Thus, the tensile strength of bending concrete on secondary crushed stone was almost no different from the tensile strength of similar concrete on granite crushed stone. This can be explained by the peculiarities of the aggregate with a porous surface, which is characterized by high adhesion to the cement-sand matrix. In general, the strength of concrete on secondary crushed stone using slag-containing cements allows them to be used effectively for road bases.

Стилі APA, Harvard, Vancouver, ISO та ін.

Khafizova, E. N., I. F. Panchenko, and D. A. Panchenko. "Use of rock crushing technological wastes for cement concrete compositions." Russian Automobile and Highway Industry Journal 18, no. 6 (January 17, 2022): 790–99. http://dx.doi.org/10.26518/2071-7296-2021-18-6-790-799.

Повний текст джерела

Анотація:

Introduction. the article deals with the issues of the use of technological waste generated during rocks crushing.Materials and Methods. In the research the rock crushing screenings from the Rezhevsky crushed rock plant and dolomite screenings from the Satkinsky crushed rock plant were used. The data on the physical-mechanical properties of crushing waste is presented, as well as a study of dusty rock cuttings made with a Fritsch Analysette 22 laser particle size analyser. The structure of concrete was analyzed by JEOL JSM-6510 electron microscope.Results. The studying results of heavy weight cement concretes of classes B22.5 - B40 with crushed stone are presented in the article. To control the properties of concrete an MC-PowerFlow 3100 hyperplasticizer additive and an air-entraining additive Centrament Air 202 were used. The phase composition of the contact zone between the cement stone and the aggregate - granite screening has been investigated.Conclusion. compositions of heavy concrete have been developed with the use of crushed stone screenings and chemical additives to regulate concrete properties. A pilot batch of reinforced concrete products was produced at the Rotor reinforced concrete plant in Vinzili, Tyumen Region.

Стилі APA, Harvard, Vancouver, ISO та ін.

Yastremsky, D. A., T. N. Abaydullina, and A. I. Kudyakov. "CRUSHED-STONE AND MASTIC ASPHALT WITH CELLULOSE CONTAINING ADDITIVE." Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture 21, no. 5 (October 29, 2019): 180–91. http://dx.doi.org/10.31675/1607-1859-2019-21-5-180-191.

Повний текст джерела

Анотація:

High-quality and durable asphalt pavement ensures safe and comfortable traffic, optimal logistics costs, territory attractiveness to construction investments, and industrial development. With constantly increasing loads on road pavements, it is necessary to improve the asphalt quality by introducing additives into the mixture, design methodology, scientific justification for the selection and preparation of raw materials. The paper proposes the development algorithm of crushed-stone and mastic asphalt modified by the new stabilizing additive, which consists of 90 % of cellulose fiber from waste paper, 5 % rubber powder, and 5 % bitumen. The optimal particle size distribution of the mineral component in the crushed-stone and mastic asphalt is considered to be 73% of crushed stone with fractions of 15–20, 10–15 and 5–10 mm, 16 % of dolomite sand from crushing screenings, 11 % of mineral powder, 0.4 % of stabilizing additive and 5.5 % of bitumen. The compressive strength of the developed composition is 2.3 times higher than that meeting the requirements of GOST 31015–2002 for the climatic zone II. The research results are confirmed by pilot-industrial tests in constructing the road pavement in Tyumen.

Стилі APA, Harvard, Vancouver, ISO та ін.

Efimov, Vladimir, Denis Pogodin, and Myhammet Fakhratov. "Technological processes of reusing crushed concrete in the demolition of buildings in construction." E3S Web of Conferences 110 (2019): 01038. http://dx.doi.org/10.1051/e3sconf/201911001038.

Повний текст джерела

Анотація:

The paper is dedicated to waste processing management in waste processing technology. Processing of scrap concrete waste, similar in composition and condition to traditional raw materials, is economically and ecologically feasible. Secondary crushed stone obtained by crushing scrap of reinforced concrete panels in demolished five-storey apartment blocks of the first phase was studied. It is shown that concrete with scrap concrete waste shows strength properties similar to primary concrete and helps organize waste-free production. The methods of recycled waste usage, especially usage of secondary crushed stone made of crushed concrete scrap, are becoming ever more relevant with every passing year. Imported concrete aggregate volumes can be reduced by 15-30% due to usage of secondary crushed stone. Consideration of industrial waste problem and methods of solving this problem by using waste in construction industry, including secondary crushed stone made of crushed concrete scrap, is made. Annually, about 11.5 million tons of construction waste is generated in Moscow. The use of industrial waste similar in terms of composition and condition of traditional raw materials unquestionable from economic and environmental point of view. This study showed that concrete using fine granulated blast furnace slag as cement additives has higher initial strength characteristics.

Стилі APA, Harvard, Vancouver, ISO та ін.

Trautvain, A. I., V. V. Yadykina, and S. S. Tobolenko. "Study of the Influence of Thin-Dispersed Powders on the Structuring Ability of Stabilizing Additives." Materials Science Forum 974 (December 2019): 37–42. http://dx.doi.org/10.4028/www.scientific.net/msf.974.37.

Повний текст джерела

Анотація:

The article presents the results of the study of the bitumen-retaining ability of stabilizing additives developed on the basis of cellulose-paper waste and finely dispersed fillers of various genesis. Analysis of the test results of crushed stone-mastic asphalt mixtures of the same composition showed that all additives provide the value of the runoff index of the organic binder in the mixture, which meets the requirement of the State Educational Standard No. 31015-2002. The introduction of mineral fillers into the stabilizer contributes to a decrease in the studied parameter, which is due to the additional structuring effect. For a two-component additive (without mineral filler), the studied indicator has the greatest value, exceeding the recommended limit. It is important to note that the use of mineral powder in the composition of stabilizing additives has a positive effect on the flow of the binder. Mineral powder, due to the structuring effect on bitumen and the formation of a microporous structure, reduces the run-off rate of the binder. This is due to the fact that bitumen, being in thin interlayers and small pores, falls into the region of influence of the molecules of the surface layer of the mineral part, increasing the density of granules and facilitating the granulation process of the additive. The minimum runoff of the organic binder is observed in the preparation of crushed stone-mastic asphalt-concrete mix with additives based on mechanically activated wastes of wet magnetic separation of ferruginous quartzites and is 0.07.

Стилі APA, Harvard, Vancouver, ISO та ін.

Mudrychenko, Anatolii, Ivan Balashov, and Sergey Illyasch. "USE OF ACRYLIC COPOLYMER ADDITIVE SOIL STABILIZATION PLUS FOR PREPARATION OF MIXTURES MADE BY COLD RESYCLING TECHNOLOGY AND CRUSHED STONE-SAND MIXTURES IN PAVEMENT FOUNDATION LAYERS." Dorogi i mosti 2021, no. 24 (October 1, 2021): 48–59. http://dx.doi.org/10.36100/dorogimosti2021.24.048.

Повний текст джерела

Анотація:

ntroduction. Rehabilitation of public roads network requires a comprehensive recovery with strengthening of the bearing capacity of the pavement foundation. Rehabilitation of the foundation bearing capacity performed by arranging layers of road material made by cold recycling technology (hereinafter — CRRM) in accordance with [4] or by arranging a layer of crushed stone — sand mixture reinforced with cement or complex binder (hereinafter — CSSM 20) according to [13]. Purpose. The purpose of the work is to study the feasibility of using acrylic additives for the preparation of mixtures made by cold recycling technology and crushed stone-sand mixtures treated with cement in the layers of pavement foundation. Materials and methods. Experimental comparative tests of CRRM and CSSM 20 with different content of complex binder were performed. Results. Feasibility of acrylic additives use has been established (hereinafter — the additive) for the preparation of CRRM and CSSM 20 in the pavement foundation layers. Recommendations on technological parameters of preparation, transportation, laying and compaction of mentioned mixtures are given. Conclusions. Performed researches have shown that according to physical and mechanical indicators CRRM and CSSM20 meet the requirements of the current normative documents of Ukraine. The advantages of use are noted.

Стилі APA, Harvard, Vancouver, ISO та ін.

Yastremskiy, D. "RESEARCH OF BITUMINOUS BINDER WITH STABILIZING ADDITIVES BY INFRARED SPECTROSCOPY AND X-RAY SPECTRAL ANALYSIS." Bulletin of Belgorod State Technological University named after. V. G. Shukhov 5, no. 11 (December 4, 2020): 24–31. http://dx.doi.org/10.34031/2071-7318-2020-5-11-24-31.

Повний текст джерела

Анотація:

Increasing the volume of crushed stone-mastic asphalt concrete used in the upper layers of road surfaces requires the development of effective stabilizing additives that ensure the uniformity of the asphalt mixture during short-term storage and transportation, as well as improving the properties of asphalt concrete. This additives include a complex stabilizing additive of the following composition: 90 % cellulose fibers from waste paper, 5 % rubber powder, 5 % viscous petroleum bitumen of the BND 90/130 brand. This article presents the results of a study of bitumen with the addition of "Viatop 66" and a complex cellulose-containing stabilizing additive (CSD). Using Fourier-transform spectroscopy, graphical data are obtained. as a result of their analysis, it is found that the interaction of stabilizing additives for crushed-mastic asphalt concrete with bitumen leads to the appearance of additional absorption bands characteristic of aromatic compounds (CH, benzene ring), sulfur-containing functional groups S=O st, R-SO-R, R-SO-OH, R-SO2-R, C=S st, as well as for C-O-H groups. X-ray spectral analysis confirmed the presence of additional sulfur-containing spectra in the composition of stabilizing additives. It is found that depending on the chemical composition of the stabilizing additives, the physical and mechanical characteristics of the bituminous binder and the resulting asphalt concrete change.

Стилі APA, Harvard, Vancouver, ISO та ін.

Fomina, Natalya, Irina Pavlova, and Maria Kochergina. "Industrial Waste as Components of Building Materials." E3S Web of Conferences 222 (2020): 04002. http://dx.doi.org/10.1051/e3sconf/202022204002.

Повний текст джерела

Анотація:

The possibilities of using large-tonnage waste from the Saratov region in the production of building materials are analysed. Waste was investigated: phosphogypsum - waste from the production of mineral fertilizers; steel-making slag, limestone crushing waste, construction waste (crushed concrete). The extraction of strontium and rare-earth metals from phosphogypsum is substantiated, followed by its processing into products that solidify according to the non-hydration principle, or use in the compositions of expanding cements. The development of geopolymer binders of alkaline activation based on steel-making slags is proposed. The introduction of low water demand carbonate cements into construction practice has been substantiated. Limestone crushing waste can be used as a carbonate mineral additive. The processing of crushed concrete waste into crushed stone, coarse sands and finely dispersed additives into cement concretes is considered. Technologies for processing large-tonnage waste in the production of building materials are environmentally sound and economically justified.

Стилі APA, Harvard, Vancouver, ISO та ін.

Shekhovtsova, S. Yu. "Features of the Formation of Properties of Stone-Mastic Asphalt Concrete Based on a Warm Polymer Modified Binder." Materials Science Forum 992 (May 2020): 200–205. http://dx.doi.org/10.4028/www.scientific.net/msf.992.200.

Повний текст джерела

Анотація:

Stone mastic asphalt concrete is one of the main types of asphalt concrete used for the construction of road surfaces. The quality, reliability and longevity of which depends on road safety of vehicles. To reduce the intensity of aging processes occurring at the stage of production and laying of asphalt concrete, "green" technologies are used, based on the use of physical and chemical processes that reduce the viscosity of bitumen to produce warm asphalt mixtures. This paper discusses the features of the formation of properties of crushed stone-mastic asphalt mixes SMA-15 based on polymer bitumen modified, compacted at lower temperatures, relative to traditional asphalt concrete. The influence of chemical additives of domestic and foreign production of DAD-TA and Cecabase RT 945 on the properties of modified binder and asphalt concrete was studied. It was established that they have a positive plasticizing effect on the modified bitumen binder in crushed stone-mastic asphalt concrete without a decrease in heat resistance and adhesive strength, which made it possible to compact asphalt concrete samples at low temperatures (up to 130°C) without negatively affecting the strength and deforming properties of asphalt concrete.

Стилі APA, Harvard, Vancouver, ISO та ін.

Shepelev, I. I., E. I. Zhukov, E. N. Eskova, E. V. Kiryushin, and O. V. Рilyaeva. "Promising Ways to Recycle and Use Waste from Gas Purification Facilities of Alumina Production." Ecology and Industry of Russia 26, no. 6 (June 3, 2022): 4–9. http://dx.doi.org/10.18412/1816-0395-2022-6-4-9.

Повний текст джерела

Анотація:

For the disposal of dust from gas-cleaning facilities of sintering furnaces, in addition to a closed dust circulation scheme, a partial removal of it from electric filters for subsequent use in road construction is proposed. It is shown that dust collected from 4–5 fields of electrofilters containing chlorides and sulfates should be used as additives in a nepheline-crushed stone mixture, which will allow obtaining the required high frost resistance indicators of road mix samples.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Stone, Crushed Additives"

Wojtowicz, Maria. "Macro composites for crushing - additive manufacturing of hard phase : Development and testing of macro composites for crushing purposes." Thesis, Uppsala universitet, Tillämpad materialvetenskap, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-447459.

Повний текст джерела

Анотація:

During this master thesis a crushing material composite was developed in order to determine if a specific design consisting of a pointy hard phase with a ductile phase in between can reduce the load needed to crush stone and therefor decrease the energy consumption during stone crushing. The steel hard phase (ASP 2012) was printed using an additive manufacturing method called selective laser melting (SLM). A process parameter optimization was performed in order to achieve a dense material and a pre-heated building platform was used to prevent cracking. The hard phase designs were printed and then filled with bronze (JM3 and JM7). The composites and steel references were tested by placing a stone on each sample and applying pressure until the stone broke. After the tests, the loads and the deterioration of the samples was analyzed. The results showed that it was possible to print the hard phase, but some defects like micro cracking were hard to eliminate entirely. Several methods were tested to cast the bronze but the most suitable during this project was melting of the bronze in an induction furnace with vacuum atmosphere. The results from the crushing simulations showed that there was a small difference between the references and the developed macro composites. The composites began to crush stones at lower loads than the references. Nevertheless, due to a large dispersion of the results a statistical difference could not be established.

Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Stone, Crushed Additives"

Thomas, George L., P.E., Texas. Dept. of Transportation. Materials and Tests Division., and Texas. Dept. of Transportation. Office of Research and Technology Transfer., eds. A demonstration of stone matrix asphalt mix designs using high polish value crushed stone. [Austin, Tex: Texas Dept. of Transportation, Research and Technology Transfer Section, 1996.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Stone, Crushed Additives"

Vdovin, Evgenii, Lenar Mavliev, and Nikita Konovalov. "Modification by Zeolite-Containing Additive the Road-Building Materials Based on Carbonate Crushed Stone-Sand Mixtures and Cements." In Lecture Notes in Civil Engineering, 308–17. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-80103-8_33.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Stone, Crushed Additives"

Buczynski, Przemysław, and Marek Iwanski. "The Influence of Hydrated Lime, Portland Cement and Cement Dust on Rheological Properties of Recycled Cold Mixes with Foamed Bitumen." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.135.

Повний текст джерела

Анотація:

This article presents a laboratory evaluation of the viscoelastic properties of recycled base courses produced with different fillers. The aim of this study was to investigate the influence of loading time and temperature on the complex modulus (E*) and the phase angle (6) of recycled base courses with respect to selected additives used. The mixtures contained reclaimed asphalt pavement RAP, crushed stone from existing base courses and virgin aggregate. Foamed bitumen 50/70 at 2.5% was used as a binder. The hydraulic binder constituted 3.0% of the recycled base course mixture. Portland cement, hydrated lime and cement kiln dust CKD were added as fillers. Evaluation of rheological properties of recycled base courses according to selected additives was carried out to the procedure set out in EN 12697-26 annex D. The evaluation of stiffness modulus was conducted in the direct tension- compression test on cylindrical samples (DTC-CY). The samples were subjected to the cycles of sinusoidal strain with an amplitude Bo &amp;lt; 25μB. All tests were performed over a range of temperatures (5 ºC, 13 ºC, 25 ºC, 40 ºC) and loading times (0.1 Hz, 0.3 Hz, 1 Hz, 3 Hz, 10 Hz, 20 Hz). The results were used to model stiffness modulus master curves of the recycled base courses containing selected additives in the hydraulic binder.

Стилі APA, Harvard, Vancouver, ISO та ін.

Akhtyamov, E. R., I. N. Kruchinin, and E. I. Kruchinina. "FEATURES OF ASPHALT COVERING DESIGNFOREST ROADS IN THE NORTHERN AND OF THE POLARURALS." In Modern machines, equipment and IT solutions for industrial complex: theory and practice. Voronezh State University of Forestry and Technologies named after G.F. Morozov, Voronezh, Russia, 2021. http://dx.doi.org/10.34220/mmeitsic2021_23-28.

Повний текст джерела

Анотація:

The main tasks of improving the crushed stone-mastic coatings of forest timber highways through the use of innovative road-building materials are considered. Such roads are characterized by the use of materials capable of meeting the basic requirements for transport and operational conditions in difficult natural and climatic conditions. The known road building materials are distinguished by the instability of their physical and mechanical properties. This causes significant difficulties both in the design and in the operation of forest timber roads made of these materials. Despite the complex of experimental studies carried out, the task of developing road coatings with adjustable performance properties remains unfulfilled. Thus, the developed method of designing the grain composition of crushed stone-mastic asphalt concrete pavements of forest roads, with new transport and operational parameters, taking into account the operating conditions, which determined the purpose of this work, will help to solve the problem. The aim of the research was to develop methods for creating crushed-night-mastic asphalt concrete pavements of forest timber roads, using a heat stabilizing additive from expanded vermiculite sand. In this work, the problem of assessing the degree of influence of the addition of sand from expanded vermiculite on the quality indicators of crushed stone-mastic asphalt concrete coatings of forest timber roads was solved. The results of the work were the creation of a formulation of crushed stone-mastic asphalt concrete with a heat-stabilizing additive from expanded vermulite of fraction from 0.5 to 1.0 mm. Taking into account the sufficient adequacy of experimental research, the results of the selection of the mixture can be recommended for use in the practice of building forest timber roads for I and II road-climatic zones.

Стилі APA, Harvard, Vancouver, ISO та ін.

Sattarova, Z., R. Safin, and D. Prosvirnikov. "TECHNOLOGY OF PRODUCING COMPOSITE PAVERS OF CONTINUOUS ACTION." In Modern machines, equipment and IT solutions for industrial complex: theory and practice. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2021. http://dx.doi.org/10.34220/mmeitsic2021_124-129.

Повний текст джерела

Анотація:

Rational use of natural resources, and the involvement of wood waste generated in the logging and wood processing industry in the production of new products useful for society and the economy, is an urgent task of modern production. The use of wood flour of various fractions does not allow the most complete binding of the polymer to wood particles, since the cellulose polymer has a high polarity. This problem can be solved by soft contact thermal modification, as a result of which there is an increase in strength indicators and a decrease in the degree of water absorption. Thermomodification leads to a decrease in the hydroxyl groups of cellulose, which contributes to an increase in the binding with the polymer, its deeper penetration into the pores of the modified crushed wood particles. The paper presents a technology that allows to obtain composite paving stones from thermally modified flour, thermoplastic polymers with chemical additives and modifiers, continuous action.

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!