Дисертації з теми "Steep site"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Steep site".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Ameen, Noor, and Hassan Safawizadeh. "Visualizing Material on Site for Machines and Humans: A Step toward an Autonomous Construction Site." Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-14937.
Повний текст джерелаME310 2017 Volvo CE
Gonzalez, Hernandez Ana. "Site-level resource efficiency analysis." Thesis, University of Cambridge, 2018. https://www.repository.cam.ac.uk/handle/1810/284771.
Повний текст джерелаRose, Nathan S. Loehr J. Erik. "Laboratory load tests of side shear for axially loaded piles." Diss., Columbia, Mo. : University of Missouri--Columbia, 2008. http://hdl.handle.net/10355/6286.
Повний текст джерелаBaier, Melissa A. Wescott Daniel J. "A biological distance study of Steed-Kisker origins." Diss., Columbia, Mo. : University of Missouri-Columbia, 2009. http://hdl.handle.net/10355/6710.
Повний текст джерелаGuzda, Mark Richard. "Development of site-specific fatigue truck weights and truck volume." Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file 1.18 Mb., p, 2006. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&res_dat=xri:pqdiss&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&rft_dat=xri:pqdiss:1435844.
Повний текст джерелаLindh, Johan. "Common language effect size : A valuable step towards a more comprehensible presentation of statistical information?" Thesis, Stockholms universitet, Psykologiska institutionen, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-166438.
Повний текст джерелаLopez, Paul. "In-Situ Structural Evaluation of a Steel-Concrete Composite Floor System." Scholarly Repository, 2007. http://scholarlyrepository.miami.edu/oa_theses/92.
Повний текст джерелаWu, Chun-Hsien. "Microstructure of Flash processed Steel Characterized by Electron Backscatter Diffraction." Thesis, Virginia Tech, 2009. http://hdl.handle.net/10919/36377.
Повний текст джерелаMaster of Science
Wright, Scott Jason. "In situ molecular analysis using two-step laser mass spectrometry." Thesis, University of Edinburgh, 1997. http://hdl.handle.net/1842/11612.
Повний текст джерелаMishani, Siamak. "Investigation of fatigue failure in composite versus steel coiled tube for application in mine site drilling." Thesis, Curtin University, 2017. http://hdl.handle.net/20.500.11937/59665.
Повний текст джерелаJarrat, Robert. "Construction in in-situ cast flat slabs using steel fibre reinforced concrete." Thesis, Stellenbosch : Stellenbosch University, 2011. http://hdl.handle.net/10019.1/17861.
Повний текст джерелаENGLISH ABSTRACT: Fibre reinforced concrete (FRC) transforms concrete from a characteristically brittle material to one with a post-crack tensile residual capacity. Its application in industry has varied over the past of which the tensile properties have generally been used in the form of crack mitigation. More recently, the introduction of steel fibres has broadened this scope to structural applications in which the resisting tensile stresses that develop within a steel FRC (SFRC) element can be rather significant. This thesis reviews the existing practices and design models associated with SFRC and the suitability of its implementation as the sole form of reinforcement in in-situ cast flat slab systems. As a material SFRC is dependent on a number of factors which include the fibre type and volume, fibre distributions, element size, as well as the support and applied load conditions. Thus, its performance can be considered rather variable in comparison to conventional concrete should the incorrect practices be implemented. In order to adequately define the material characteristics, it is necessary to use test procedures that accurately reflect on the intended structural application. As a result a number of test procedures have been developed. In addition to this, the post-crack material performance is associated with a non-linear behaviour. This attribute makes the design of structural SFRC elements rather difficult. In an attempt to simplify this, existing design models define stress-strain or stress-crack width relations in which assumptions are made regarding the cross-sectional stress distribution at specified load states. This thesis takes on two parts in defining the suitability of SFRC as the sole form of reinforcement in flat slab systems. The first is a theoretical investigation regarding the micro and macro scale material performance of SFRC, the practices that exist in defining the material properties and its application in structural systems (particularly suspended slab systems), and a breakdown of the existing design models applicable to strain softening deflection hardening SFRC materials. The second part is an experimental program in which the fresh state and hardened state material properties of specified SFRC mix designs defined through flow and beam testing respectively. These properties are then implemented in the design and construction of full scale flexural and punching shear test slabs in an attempt to verify the theory applied. The investigation reveals that the use of SFRC significantly improves the ductility of concrete systems in the post-crack state through fibre crack bridging. This ductility can result in deflection hardening of flat slab systems in which the redistribution of stresses increases the load carrying capacity once cracking has taken place. However, the performance of large scale test specimens is significantly influenced by the construction practices implemented in which the material variability increases as a result of non-uniform fibre distributions. The results indicate that the load prediction models applied have potential to adequately predict the ultimate failure loads of SFRC flat slab systems but however cannot account for possible non-uniform fibre distributions which could result in premature failure of the system.
AFRIKAANSE OPSOMMING: Vesel versterkte beton (VVB) verander beton van die kenmerkende uiters bros material na ‘n material met ‘n residuele post-kraak trekkapasiteit. Die toepassing daarvan in die bedryf het in die verlede gewissel en die trek eienskappe is oor die algemeen gebruik vir kraak vermindering. Meer onlangs het die bekenstelling van staal vesel hierdie omvang verbreed na die strukturele toepassings waar trekspannings wat ‘n VVB element kan weerstaan noemenswaardig kan wees. Hierdie tesis ondersoek bestaande praktyke en ontwerpmodelle met die oog op staalvesel versterkte beton (SVVB) en die geskiktheid van die implementering daarvan as die enigste vorm van bekisting in in-situ gegiete plat blad stelsels. As ‘n materiaal, is SVVB afhanklik van ‘n aantal faktore wat die tipe vesel en volume, vesel verspreiding, element grootte, sowel as die randvoorwaardes tipe aangewende las insluit. As gevolg hiervan, kan die gedrag van SVVB, wat korrek geïmplimenteer word, as redelik varieerbaar beskou word wanneer dit met konvensionele beton vergelyk word. Ten einde die materiaaleienskappe voldoende te definieer, is dit noodsaaklik dat prosedures wat die strukturele toepassing akuraat voorstel, getoets word en daarom is ‘n aantal toets prosedures ontwikkel. Verder het die post-kraak materiaalgedrag ‘n nie-lineêre verband wat struktuurontwerp met SVVB redelik moeilik maak. Om dit te vereenvoudig, definieer bestaande ontwerpmodelle spanning-vervorming of spanning-kraakwydte verhoudings waarin aannames gemaak word ten opsigte van die spanningsverdeling oor ‘n snit, gegewe sekere lastoestande. Hierdie studie bestaan uit twee dele wat die geskiktheid van SVVB as die enigste vorm van bikisting in plat blad stelsels definieer. Die eerste deel bestaan uit ‘n teoretiese ondersoek wat handel oor die mikro- en makro-skaal materiaalgedrag van SVVB, die praktyke wat bestaan om die materiaaleienskappe en toepassing in strukturele sisteme (spesifiek opgelegde blad stelsels) te definieer, en ‘n uiteensetting van die bestaande ontwerpmodelle wat van toepassing is vir defleksie as gevolg van vervormingsversagting wat SVVB material verhard. Die tweede deel bestaan uit ‘n eksperimentele program waarin die materiaaleienskappe van gespesifiseerde SVVB meng-ontwerpe in die vars toestand en in die verharde toestand gedefinieer word deur middel van vloei- en balktoetse onderskeidelik. Hierdie eienskappe word dan toegepas vir die ontwerp en konstruksie van volskaalse buig- en ponsskuif toetsblaaie ten einde die modelle en teorie wat toegepas is, te bevestig. Die ondersoek toon dat die gebruik van SVVB die duktiliteit van beton sisteme noemenswaardig verbeter in die post-kraak toestand deur kraak oorbrugging. Hierdie duktiliteit kan defleksie verharding van plat blad stelsels veroorsaak waarin die herverdeling van spannings, nadat kraking plaasgevind het, die lasdraende kapasiteit verhoog. Die gedrag van die grootskaalse toetsmonsters word egter noemenswaardig beïnvloed deur die konstruksiemetodes wat geïmplementeer word waarin die materialveranderlikheid toeneem as ‘n gevolg van nie-uniforme vesel verdelings. Die resultate dui daarop dat die modelle wat toegepas is om die laste te voorspel, die potensiaal het om die grens falingslas van SVVB plat blad stelsel voldoende te voorspel, maar neem nie moontlike nie-uniforme veselverdelings wat kan lei tot vroeë faling van die stelsel in ag nie.
Galles, Daniel Joseph. "Measurement and prediction of distortions during casting of a steel bar." Thesis, University of Iowa, 2013. https://ir.uiowa.edu/etd/4986.
Повний текст джерелаPersson, Erik. "Austenite grain growth in bearing steels : An investigation on steel grades 100Cr6 and 100 CRMnMoSi8-4-6." Thesis, KTH, Materialvetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-140433.
Повний текст джерелаDavut, Kemal. "Characterization Of Steel Microstructures By Magnetic Barekhausen Noise Technique." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/2/12608103/index.pdf.
Повний текст джерелаCoupar, Matthew S. "The strength and ductility of the steel moment connection with reinforced side plates /." Available to subscribers only, 2005. http://proquest.umi.com/pqdweb?did=1079666011&sid=5&Fmt=2&clientId=1509&RQT=309&VName=PQD.
Повний текст джерелаSchilling, Sibylle. "Liquid in situ analytical TEM : technique development and applications to austenitic stainless steel." Thesis, University of Manchester, 2017. https://www.research.manchester.ac.uk/portal/en/theses/liquid-in-situ-analytical-tem-technique-development-and-applications-to-austenitic-stainless-steel(fd490551-7d7a-4b2e-9b1f-917b5f8165b3).html.
Повний текст джерелаAborass, Marwa A. EL-Mehde. "Effect of diamond-like carbon coating on implant drill wear during implant site preparation." University of the Western Cape, 2017. http://hdl.handle.net/11394/6306.
Повний текст джерелаDental implants are artificial fixtures that are surgically inserted into the jaws to replace missing teeth. The success of dental implant treatment is dependent on achieving successful osseointegration (Branemark et al. 2001). Drills used for implant site preparation are made of different materials such as stainless steel (SS), zirconia and ceramic. Most of them do not have sufficient cutting efficiency and wear resistance (Oliveira et al. 2012). Recently diamond-like carbon coating (DLC) has been added as a drill coating to increase the cutting efficiency, increase wear resistance and drill hardness (Batista Mends et al. 2014).
Ekström, Simon. "Musikaliskt lärande : Musikers syn på sitt musikaliska lärande." Thesis, Kungl. Musikhögskolan, Institutionen för musik, pedagogik och samhälle, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kmh:diva-1754.
Повний текст джерелаRattakham, Krittin. "Mechanism of Cathodic Prevention of Carbon Steel in Concrete." Scholar Commons, 2017. http://scholarcommons.usf.edu/etd/6630.
Повний текст джерелаWang, Wenbo. "Failure Analysis of High Nickel Alloy Steel Seal Ring Used in Turbomachinery." Scholar Commons, 2017. http://scholarcommons.usf.edu/etd/6635.
Повний текст джерелаMiyata, Edwin S. "An investigation of the monocable system for cable yarding of small, low-value trees on steep, difficult sites /." Thesis, Connect to this title online; UW restricted, 1991. http://hdl.handle.net/1773/7061.
Повний текст джерелаHansen, Kristoffer Werner. "Phase Transformation Study of X70 Steel by EBSD during In Situ Heating and Quenching." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for materialteknologi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-18909.
Повний текст джерелаGhahari, Seyed Majid. "In situ synchrotron x-ray characterisation and modelling of pitting corrosion of stainless steel." Thesis, University of Birmingham, 2012. http://etheses.bham.ac.uk//id/eprint/3269/.
Повний текст джерелаvan, Niekerk Cornelis Janse. "In-situ alloying of AISI 410L martensitic stainless steel with nitrogen during laser cladding." Diss., University of Pretoria, 2016. http://hdl.handle.net/2263/61341.
Повний текст джерелаDissertation (MEng)--University of Pretoria, 2016.
Materials Science and Metallurgical Engineering
MEng
Unrestricted
Collins, Sunniva Refsnes. "Forging effects on manganese sulfide inclusions as fatigue initiation sites in AISI 4140 steel." Case Western Reserve University School of Graduate Studies / OhioLINK, 1994. http://rave.ohiolink.edu/etdc/view?acc_num=case1057696631.
Повний текст джерелаZhu, Yong. "Retrofitting of reinforced concrete coupling beams by bolted side steel plates for strength and deformability." Click to view the E-thesis via HKUTO, 2006. http://sunzi.lib.hku.hk/hkuto/record/B36434048.
Повний текст джерелаZhu, Yong, and 朱勇. "Retrofitting of reinforced concrete coupling beams by bolted side steel plates for strength and deformability." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2006. http://hub.hku.hk/bib/B36434048.
Повний текст джерелаGopalan, Sowmya. "Estimating Columnar Grain Size in Steel-Weld Images using Image Processing Techniques." The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1250621610.
Повний текст джерелаBarke, Derek Woolrich 1975. "An in situ test for stress corrosion damage and tension in bolts." Monash University, Dept. of Mechanical Engineering, 2002. http://arrow.monash.edu.au/hdl/1959.1/7686.
Повний текст джерелаDubois, André. "Essai de compression-translation : Contribution à l'identification des lois de comportement surfaciques et volumiques." Valenciennes, 1995. https://ged.uphf.fr/nuxeo/site/esupversions/b97e143c-6fb6-44cc-83c8-e34fc7845c1e.
Повний текст джерелаBoåsen, Magnus. "Modeling framework for ageing of low alloy steel." Licentiate thesis, KTH, Hållfasthetslära (Inst.), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-246036.
Повний текст джерелаÅldring av låglegerade stål i kärntekniska användningsområden framträder typiskt som ett hårdnande och en försprödning av materialet. Detta på grund av utvecklingen av mikrostrukturen under bestrålning och under rent termiska förhållanden. Bestrålning introducerar jämt fördelade kluster av legeringsämnen. Termisk åldring har däremot visats ge upphov till en mer ojämn fördelning. Klustren hämmar dislokationsrörelsen i materialet och ger därigenom upphov till en ökning av materialets sträckgräns, vid en mer påtaglig åldring det även leda till ett sänkt arbetshårdnande på grund av lokalisering av plastisk töjning i s.k. kanaler/band. Försprödning är en sänkning av materialets brottseghet som en följd av de mikrostrukturella förändringar som sker vid åldring. Arbetet som presenteras i den här avhandlingen har gjorts i syfte till att ta fram ett möjligt ramverk för modellering av låglegerade stål.I Artikel I, används en töjningsgradientbaserad plasticitetsteori för att kunna fånga längdskalebeteenden. Längdskalan i teorin antas vara relaterad till dislokationernas medelfria väg och den förändring den genomgår vid plastisk deformation. Flera utvecklingslagar för längdskalan har analyserats och implementerats i en finita element kod för 2D plan deformation. Denna implementering har använts för att lösa ett testproblem bestående av ren böjning med syfte att undersöka effekterna av utvecklingen hos längdskalan. Alla de utvecklingslagar som presenteras i artikeln ger en minskande längdskala, vilket leder till vad som valt att kallas förlust av icke-lokalitet. Fenomenet leder till ett övergripande mjuknande vid fall där den plastiska töjningsgradienten har stor inverkan på lösningen. Resultaten är i preliminär överenstämmelse med de typer av lokalisering av plastisk töjning som observerats i starkt bestrålade material.I Artikel II utvecklas ett generaliserat spänningsmått i syfte att beskriva klyvbrott, här benämnt effektivt normalspänningsmått. Detta har använts i samband med en icke-lokal svagaste länk modell, som har applicerats på två experimentella studier från den öppna litteraturen i syfte att studera effekterna av det effektiva normalspänningsmåttet. Utöver detta presenteras även nya experiment på ytspruckna provstavar under fyrpunktsböj. I artikeln visas att modellen återskapar sannolikheten för brott för alla undersökta experimentuppställningar, d.v.s. modellen visas vara väl duglig för att överföra brottseghet mellan geometrier.
QC 20190312
Gibbs, Parker Kenneth. "Strain Path Effect on Austenite Transformation and Ductility in TBF 1180 Steel." BYU ScholarsArchive, 2019. https://scholarsarchive.byu.edu/etd/7127.
Повний текст джерелаKorkut, Ahmet Esat. "A Practical Optimum Design Of Steel Structures With Scatter Search Method And Sap2000." Master's thesis, METU, 2013. http://etd.lib.metu.edu.tr/upload/12615682/index.pdf.
Повний текст джерелаNelson, Daniel R. "Transesterification and Recovery of Intracellular Lipids Using a Single Step Reactive Extraction." DigitalCommons@USU, 2010. https://digitalcommons.usu.edu/etd/642.
Повний текст джерелаEngelberg, Dirk Lars. "Grain boundary engineering for intergranular stress corrosion resistance in austenitic stainless steel." Thesis, University of Manchester, 2006. http://www.manchester.ac.uk/escholar/uk-ac-man-scw:207805.
Повний текст джерелаGuérin, Jean-Dominique. "Analyse des essais de compression et de traction des aciers après solidification in situ et des essais d'indentation des aciers phosphatés." Valenciennes, 1993. https://ged.uphf.fr/nuxeo/site/esupversions/b769f69b-4777-454d-94ad-c3bac6b6fab1.
Повний текст джерелаCramer, Jeffrey Grant. "Strain Path Effect on Austenite Transformation and Ductility in Q&P 1180 Steel." BYU ScholarsArchive, 2017. https://scholarsarchive.byu.edu/etd/6650.
Повний текст джерелаShrestha, Alina. "Fatigue Testing and Data Analysis of Welded Steel Cruciform Joints." ScholarWorks@UNO, 2013. http://scholarworks.uno.edu/td/1670.
Повний текст джерелаJones, Benjamin S. "The Other Side of the Fence." VCU Scholars Compass, 2006. http://scholarscompass.vcu.edu/etd/843.
Повний текст джерелаSilveira, João Ricardo Filipini da. "Modelamento do efeito do tamanho de grão sobre o campo coercivo de aços elétricos." Universidade de São Paulo, 2011. http://www.teses.usp.br/teses/disponiveis/3/3133/tde-26082011-140213/.
Повний текст джерелаElectrical steel sheets (0,7% Si and 0,3% Al) were cold-rolled and annealed (760º C, 2h) in order to obtain different grain sizes through recrystallization. Another set of sheets from the same material were annealed at different temperatures and time-frames, so as to produce different grain sizes through grain growth. Grain size was measured through the intercept method and grain size distribution parameters were determined via a semi-analytical method based on measurement of individual grain areas upon micrographs. From quasistatic hysteresis measurements in an Epstein frame, the coercive field of each sample was determined at various maximum induction values (0,6 0,8 1,0 1,2 1,4 e 1,5T). The data set fits with less than 4% average deviation a phenomenological law of the type: Hc aBmax^c /TG bBmax^d In which Hc is the coercive field, TG is the grain size, Bmax is the maximum induction value and a, b, c and d are the fitting parameters. By introducing the grain boundary demagnetizing field effect on Magers physical model, a good estimate of the values of a and b was obtained, as well as a reasonable explanation to their physical meaning. Integrating Mager and Preisach models, a different equation for the data was obtained, which offered an approximate value of c. In order for physical models do fully explain the phenomenological equation, there is still need to understand the parameter d.
Berthelot, Mathieu. "Extension PI de porphyrinespar couplage oxydant C-N intramoléculaire." Thesis, Bourgogne Franche-Comté, 2019. https://nuxeo.u-bourgogne.fr/nuxeo/site/esupversions/bdbabe4e-fa90-4cfa-8143-b07e530e3f78.
Повний текст джерелаΠ-extension of porphyrins has been performed via intramolecular oxidative C-N coupling of peripheral pyridinyl fragment(s) with the porphyrin core. These fusion reactions lead to the formation of C-N bond(s) between the substituent(s) and the porphyrin. The precursors were functionnalized with 2-mercaptopyridine, 8-hydoxyquinoline and 2-picoline at their meso or β-pyrrolic positions via aromatic nucleophlic substitution, cross-coupling reaction or reaction of the macrocycle with organolithium reagents. Voltametric analyses revealed some marked differences on the reactivity of the porphyrins depending on their substitution pattern and metalation (nickel(II) or zinc(II)). Chemical and electrochemical conditions were established to perform the intramolecular oxidative coupling and adapted depending on the substitution and metalation. The electrochemical, spectroscopic and structural properties of the fused products were analysed and compared to their respective precursors
Myeong-Heom, Park. "Effect of Grain Size on Mechanical Properties of Dual Phase Steel Composed of Ferrite and Martensite." 京都大学 (Kyoto University), 2017. http://hdl.handle.net/2433/225592.
Повний текст джерелаHalim, Amalia Yunita. "Investigation of the impact of nitrate injection to control sourcing problem in oil reservoir : benefit and side effects on steel materials." Thesis, Curtin University, 2011. http://hdl.handle.net/20.500.11937/1035.
Повний текст джерелаSiafakas, Dimitrios. "On deoxidation practice and grain size of austenitic manganese steel." Licentiate thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH. Forskningsmiljö Material och tillverkning – Gjutning, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-37788.
Повний текст джерелаHadfieldstålen exceptionella slitstyrkan och deformationshårdnande har gjort dessa till ettav de viktigaste materialen för tillverkning av gjutna komponenter som används inomgruv-, kross-, borr-och gruvindustrin. I alla metallegeringar som används för tillverkningav gjutna komponenter styrs de mekaniska egenskaperna av materialets mikrostruktur.Gjutna komponenter med fin mikrostruktur presentera bättre mekaniska egenskaper ochminskad risk för defekter jämfört med komponenter med grov mikrostruktur. En minskadkornstorlek i Hadfieldstål kan öka materialets hållfasthet upp till 30% och minska riskenför porositetsbildning vid stelning.Tillsatsning av spårämnen eller legeringselement i en metallsmälta för att modifiera ochförbättra mikrostrukturen kallas ympning. Denna metod används i lättmetaller och vidtillverkning av gjutjärnskomponenter, men har ännu inte fått acceptans i stålindustrineftersom forskningen inte har funnit effektiva kärnbildare att användas som ympmedel.Huvudsyftet med detta arbete är att undersöka kvalitativa och kvantitativa egenskaper hosde desoxideringsprodukter som skapas under tillverkningen av Hadfield stål och hur deunder och efter stelning påverkar mikrostrukturens grovlek. Arbetet syftar till att identifierapartikeltyper och legeringselement som är effektiva för att förfina den austenitiskamikrostrukturen och bana väg för utveckling nya och förbättra desoxiderings- ochympningsprocesser som i sin tur kommer att resultera i en förbättring av den gjutnakomponentens egenskaper.Partiklarnas utskiljning och materialet resulterande kornstorlek studerades i aluminiumochtitan-desoxidiserade Hadfieldstål, tillverkade i pilotskala. Den första delen av dettaarbete var att identifiera kvalitativa och kvantitativa egenskaper hosdesoxidationspartiklar, som typ, morfologi, sammansättning och storlek.Utskiljningssekvensen fastställdes. En modell för att förutsäga partikelstorlek och derastillväxt utvecklades. De experimentella resultaten jämfördes med termodynamiskajämviktberäkningar och utskiljningen för varje typ av partikel beskrevs. I den andra delenstuderades kornstorleken och hur denna varierade desoxideringsbehandlingen. Därefterkorrelerades kornstorleken med partikeltyp och dess karaktäristika och rangordnades efterderas förmåga att förfina mikrostrukturen. Partiklarnas kristallografiska missanpassningmot austenitens kristallstruktur beräknades och jämfördes med experimentellt fastställdarangordningen.
InDeGrainS I
Babinský, Tomáš. "Rekrystalizace automatové oceli studované technikou in-situ SEM/EBSD." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378404.
Повний текст джерелаShahedipour, Fatemeh. "Diamond synthesis on steel substrates using magneto-active plasma chemical vapor deposition with novel in situ FTIR spectroscopy characterization /." free to MU campus, to others for purchase, 1998. http://wwwlib.umi.com/cr/mo/fullcit?p9901278.
Повний текст джерелаHirsch, Michael Robert. "Fretting behavior of AISI 301 stainless steel sheet in full hard condition." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/24759.
Повний текст джерелаSafara, Nosar Nima. "Modeling the Microstructure Evolution During and After Hot Working in Martensitic Steel." Licentiate thesis, Högskolan Dalarna, Institutionen för information och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-287278.
Повний текст джерелаI denna studie är målet att förutsäga mikrostrukturutvecklingen under och efter varmbearbetning i ett martensitiskt rostfritt stål med 13 % krom med hjälp av en fysisk baserad modell i form av en MATLAB verktygslåda. Denna modell är baserad på en teori för dislokationstäthet och bestårav kopplade uppsättningar av evolutionsekvationer för dislokation, vakanser, återhämtning, rekristallisation och kornstillväxt. Fokus i detta arbete är beräkning av flytespänningen och effekten av sekundärfaspartiklar på härdningsmekanismerna i materialet vid höga temperaturer. Återhämtning och rekristallisation studeras också för denna legering under deformation och efter spänningsrelaxation. Den experimentella delen av detta arbete utfördes med en Gleeble termomekanisk simulator inom temperaturområdet 850 till 1200°C. Proverna undersöktes senare med ett ljust optiskt mikroskop (LOM) och svepelektronmikroskop(SEM) utrustad med energidispersiv spektroskopi (EDS). Hårdhetstest och fasisolering utfördes också på proverna och resultaten jämförs med modelleringsresultaten. Modellen på ett tillfredsställande sätt kan förutsäga korntillväxt, återhämtning, rekristallisation och flytspänningen för denna legering. Vidare undersökning av partiklarna i sekundärfasen visade att den uppmätta medelstorleken för karbider har bra överensstämmelse med vad som erhålls från modellen och hårdhetsvärdena. Den modellerade volymfraktionen av karbiderna följde en något annorlunda trend vid temperaturerna högre än 1000°C jämfört med hårdhetsvärden och fasisoleringsresultat. Dessutom beräknas Ms temperaturen och fraktionen av martensitfasen för släckta prover där resultaten följer de uppmätta hårdhetsvärdena. Slutligen definieras Zener-Hollomon-parametern (Z) och dess förhållande till flytspänningen och aktiveringsenergin för deformation. Den kinetiska dynamiska rekristallisation (DRX) modelleras och fraktionen DRX beräknades vidolika temperaturer och töjningshastigheter för denna legering.
Sakai, Akira, Ken Sugimoto, Takeo Yamamoto, Masahisa Okada, Hiroya Ikeda, Yukio Yasuda, and Shigeaki Zaima. "Reduction of threading dislocation density in SiGe layers on Si (001) using a two-step strain–relaxation procedure." American Institute of Physics, 2001. http://hdl.handle.net/2237/6996.
Повний текст джерелаMao, Wenqi. "Deformation mechanism of metastable austenitic steel with TRIP effect and associated kinetics of deformation induced martensitic transformation." Doctoral thesis, Kyoto University, 2021. http://hdl.handle.net/2433/263657.
Повний текст джерела