Дисертації з теми "Statistical shape modeling"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-41 дисертацій для дослідження на тему "Statistical shape modeling".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Besbes, Ahmed. "Image segmentation using MRFs and statistical shape modeling." Phd thesis, Ecole Centrale Paris, 2010. http://tel.archives-ouvertes.fr/tel-00594246.
Повний текст джерелаLamecker, Hans. "Variational and statistical shape modeling for 3D geometry reconstruction." München Verl. Dr. Hut, 2008. http://d-nb.info/992163226/04.
Повний текст джерелаLamecker, Hans [Verfasser]. "Variational and statistical shape modeling for 3D geometry reconstruction / Hans Lamecker." Berlin : Freie Universität Berlin, 2008. http://d-nb.info/1023329603/34.
Повний текст джерелаSalhi, Asma. "Towards a combined statistical shape and musculoskeletal modeling framework for pediatric shoulder joint." Thesis, Ecole nationale supérieure Mines-Télécom Atlantique Bretagne Pays de la Loire, 2019. http://www.theses.fr/2019IMTA0137/document.
Повний текст джерелаObstetrician Brachial Plexus Palsy (OBPP) is a common birth injury in children leading to shoulder joint deformity and abnormal function. While the management of OBPP disorder focuses on restoring the shoulder joint function, the underlying pathomechanics is not clearly understood yet. Computational models are effective to provide such insights, however, there is no pediatric shoulder joint model to understand the OBPP disorder. Thus, the global aim of this research work was to build a computational framework combining the advances in statistical shape modeling (SSM) and multi-body musculoskeletal modeling (MSKM) domains. Due to a lack of sufficient data in the pediatric cohort, I first developed the framework for adult shoulder joint. For this, I illustrated the accuracy of SSM in predicting 1) missing part of the scapula, and 2) muscle insertion regions on scapula and humerus bones. This method was then integrated with adult shoulder MSKMs to show the differences between generic and subject specific constructs. For the second aim of this thesis, I developed a pediatric MSKM of the shoulder joint complex using OpenSim software. Pediatric MSKM represented scapulothoracic, sternoclavicular, acromioclavicular, and glenohumeral joints with 13 degrees of freedom, and actuated by 52 musculotendon actuators representing 14 shoulder muscles. Using inverse kinematics and inverse dynamics approaches, the model was used to determine the differences in joint kinematics, and joint dynamics between healthy and unhealthy side of a single OBPP subject. Future work is focused on completing the framework on pediatric population and understanding the pathomechanics of OBPP
Patenaude, Brian Matthew. "Bayesian statistical models of shape and appearance for subcortical brain segmentation." Thesis, University of Oxford, 2007. http://ora.ox.ac.uk/objects/uuid:52f5fee0-60e8-4387-9560-728843e187b3.
Повний текст джерелаLópez, Picazo Mirella. "3D subject-specific shape and density modeling of the lumbar spine from 2D DXA images for osteoporosis assessment." Doctoral thesis, Universitat Pompeu Fabra, 2019. http://hdl.handle.net/10803/666513.
Повний текст джерелаLa osteoporosis es la enfermedad ósea más común, con una morbilidad y mortalidad significativas causadas por el aumento de la fragilidad ósea y la susceptibilidad a las fracturas. La absorciometría de rayos X de energía dual (DXA, por sus siglas en inglés) es la técnica de referencia para la evaluación de la osteoporosis y del riesgo de fracturas en la columna vertebral. Sin embargo, el análisis estándar de las imágenes DXA solo proporciona mediciones 2D y no diferencia entre los compartimentos óseos; tampoco evalúa la densidad ósea en el cuerpo vertebral, que es donde se producen la mayoría de las fracturas osteoporóticas. La tomografía computarizada cuantitativa (QCT, por sus siglas en inglés) es una técnica alternativa que supera las limitaciones del diagnóstico basado en DXA. Sin embargo, debido al alto costo y la dosis de radiación, la QCT no se usa para el diagnóstico de la osteoporosis. En esta tesis, se propone un método que proporciona una estimación personalizada de la forma 3D y la densidad de la columna vertebral en la zona lumbar a partir de una única imagen DXA anteroposterior. El método se basa en un modelo estadístico 3D de forma y densidad creado a partir de un conjunto de entrenamiento de exploraciones QCT. La estimación 3D personalizada de forma y densidad se obtiene al registrar y ajustar el modelo estadístico con la imagen DXA. Se segmentan los compartimentos óseos corticales y trabeculares utilizando un algoritmo basado en modelos. Se realizan mediciones 3D en diferentes regiones vertebrales y compartimentos óseos. La precisión de los métodos propuestos se evalúa comparando las mediciones 3D derivadas de DXA con las derivadas de QCT. También se realizan dos estudios de casos y controles: un estudio retrospectivo que evalúa la capacidad de las mediciones 3D derivadas de DXA en la columna lumbar para discriminar entre sujetos con fracturas vertebrales relacionadas con la osteoporosis y sujetos control; y un estudio que evalúa la asociación entre las mediciones 3D derivadas de DXA en la columna lumbar y las fracturas de cadera relacionadas con la osteoporosis. En ambos estudios, se encuentran asociaciones más fuertes entre las fracturas relacionadas con la osteoporosis y las mediciones 3D derivadas de DXA en comparación con las mediciones estándar 2D. La tecnología desarrollada dentro de esta tesis ofrece un análisis en 3D de la columna lumbar, que podría mejorar la evaluación de la osteoporosis y el riesgo de fractura en pacientes que se sometieron a una exploración DXA estándar de la columna lumbar sin ningún examen adicional.
Hoogendoorn, Corné. "A statistical dynamic cardiac atlas for the virtual physiological human: construction and application." Doctoral thesis, Universitat Pompeu Fabra, 2014. http://hdl.handle.net/10803/132632.
Повний текст джерелаEsta tesis está centrada en la construcción de un atlas cardiaco, para servir como marco común de referencia en el Virtual Physiological Human (VPH). La construcción consiste en la trayectoria completa, empezando con un conjunto de imágenes 3D+t de tomografía computacional multi-corte, y entonces hacer una normalización espacial de las imágenes, segmentación de la imagen promedio sintetizada, un mallado multi-estructura, y finalmente la transformación de la malla a la población de imágenes. Adicionalmente, la tesis presenta dos aplicaciones del atlas. Primero, el atlas se usa para enmarcar un modelo espacio-temporal de la morfología cardiaca que modela la variación a lo largo de ambos 'ejes' simultáneamente. Tal propuesta debe ser preferible sobre otros m\'etodos existentes, los cuales desacoplan las dos fuentes de variación para modelarlas separadamente, en isolación. Segundo, el atlas está aplicado al desarrollo de una técnica de aceleración para simulaciones personalizadas de electrofisiología (EF) cardiaca. El conocimiento previo encapsulado en nuestro atlas se usa, en conjunto con un solver de EF cardiaca, para construir un modelo estadístico conectando morfología cardiaca con los steady states de modelos celulares del miocardio que precondicionan a simulaciones detalladas de EF cardiaca. Esta aplicación posiciona el propuesto atlas dinámico cardiaco en el contexto de simulaciones relacionadas al VPH, cuyo costo computacional actual está en gran exceso de lo aceptable para su adopción en la práctica clínica de hoy en día.
Su, Z. "Statistical shape modelling : automatic shape model building." Thesis, University College London (University of London), 2011. http://discovery.ucl.ac.uk/1213097/.
Повний текст джерелаZhu, Zuowei. "Modèles géométriques avec defauts pour la fabrication additive." Thesis, Université Paris-Saclay (ComUE), 2019. http://www.theses.fr/2019SACLN021/document.
Повний текст джерелаThe intricate error sources within different stages of the Additive Manufacturing (AM) process have brought about major issues regarding the dimensional and geometrical accuracy of the manufactured product. Therefore, effective modeling of the geometric deviations is critical for AM. The Skin Model Shapes (SMS) paradigm offers a comprehensive framework aiming at addressing the deviation modeling problem at different stages of product lifecycle, and is thus a promising solution for deviation modeling in AM. In this thesis, considering the layer-wise characteristic of AM, a new SMS framework is proposed which characterizes the deviations in AM with in-plane and out-of-plane perspectives. The modeling of in-plane deviation aims at capturing the variability of the 2D shape of each layer. A shape transformation perspective is proposed which maps the variational effects of deviation sources into affine transformations of the nominal shape. With this assumption, a parametric deviation model is established based on the Polar Coordinate System which manages to capture deviation patterns regardless of the shape complexity. This model is further enhanced with a statistical learning capability to simultaneously learn from deviation data of multiple shapes and improve the performance on all shapes.Out-of-plane deviation is defined as the deformation of layer in the build direction. A layer-level investigation of out-of-plane deviation is conducted with a data-driven method. Based on the deviation data collected from a number of Finite Element simulations, two modal analysis methods, Discrete Cosine Transform (DCT) and Statistical Shape Analysis (SSA), are adopted to identify the most significant deviation modes in the layer-wise data. The effect of part and process parameters on the identified modes is further characterized with a Gaussian Process (GP) model. The discussed methods are finally used to obtain high-fidelity SMSs of AM products by deforming the nominal layer contours with predicted deviations and rebuilding the complete non-ideal surface model from the deformed contours. A toolbox is developed in the MATLAB environment to demonstrate the effectiveness of the proposed methods
Golalizadeh, Lehi Mousa. "Statistical modelling and inference for shape diffusions." Thesis, University of Nottingham, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.435446.
Повний текст джерелаBrignell, Christopher. "Shape analysis and statistical modelling in brain imaging." Thesis, University of Nottingham, 2007. http://eprints.nottingham.ac.uk/12106/.
Повний текст джерелаAlemneh, Tewodros. "Articulated Statistical Shape Modelling of the Shoulder Joint." Master's thesis, Faculty of Health Sciences, 2020. http://hdl.handle.net/11427/32190.
Повний текст джерелаTardugno, Angelo. "Novel approaches to statistical shape modelling of bone." Thesis, Imperial College London, 2010. http://hdl.handle.net/10044/1/5881.
Повний текст джерелаValdés, Amaro Daniel Alejandro. "Statistical shape analysis for bio-structures : local shape modelling, techniques and applications." Thesis, University of Warwick, 2009. http://wrap.warwick.ac.uk/3810/.
Повний текст джерелаPrieto, Bernal Juan Carlos. "Multiparametric organ modeling for shape statistics and simulation procedures." Thesis, Lyon, INSA, 2014. http://www.theses.fr/2014ISAL0010/document.
Повний текст джерелаGeometric modeling has been one of the most researched areas in the medical domain. Today, there is not a well established methodology to model the shape of an organ. There are many approaches available and each one of them have different strengths and weaknesses. Most state of the art methods to model shape use surface information only. There is an increasing need for techniques to support volumetric information. Besides shape characterization, a technique to differentiate objects by shape is needed. This requires computing statistics on shape. The current challenge of research in life sciences is to create models to represent the surface, the interior of an object, and give statistical differences based on shape. In this work, we use a technique for shape modeling that is able to model surface and internal features, and is suited to compute shape statistics. Using this technique (s-rep), a procedure to model the human cerebral cortex is proposed. This novel representation offers new possibilities to analyze cortical lesions and compute shape statistics on the cortex. The second part of this work proposes a methodology to parameterize the interior of an object. The method is flexible and can enhance the visual aspect or the description of physical properties of an object. The geometric modeling enhanced with physical parameters is used to produce simulated magnetic resonance images. This image simulation approach is validated by analyzing the behavior and performance of classic segmentation algorithms for real images
Maquart, Tristan. "Trivariate models generation from unstructured surface manifolds for isogeometric analysis : Application to reduced order modeling with geometric parameters." Thesis, Lyon, 2019. http://www.theses.fr/2019LYSEI033.
Повний текст джерелаThis work presents a generic framework to construct trivariate isogeometric meshes of complicated geometry and arbitrary topology required for reduced order model applications. Indeed, structured meshes such as isogeometric or pure hexahedral ones are difficult to obtain in an automatic manner. Statistical shape analysis and reduced order modeling require structured and ordered data to be efficient. For that purpose, we use the triangulated solid 3D model's boundary provided from B-Rep CAD (Boundary-Representation in Computer Aided Design) models. Firstable, the workflow includes an integration of a geometry-feature-aware pants-to-cuboids decomposition algorithm. The input triangulated mesh is decomposed into a set of cuboids in two steps: pants decomposition and cuboid decomposition. Cuboid decomposition splits a surface into a set of quadrilateral patches which can define a volumetric layout of the associated boundary surface. Cross fields, i.e., 4-symmetry direction fields are used to guide a surface aligned global parameterization. Optimizing this parameterization, patches of the quadrilateral layout inherited from the cuboid decomposition are re-positioned on the surface in a way to achieve low overall distortion. The optimization process is thought to design cross fields with topological and geometrical constraints. Using the optimized cuboid decomposition, a volumetric layout is extracted. Based on the global parameterization and the structured volumetric layout previously computed, a trivariate isogeometric parameterization is deducted. Learning generalized forms of theorems in the topology field, invariant topological properties are analyzed throughout the proposed process. To finish, for different geometrical instances with the same topology but different geometries, our method allows to have the same representation: trivariate isogeometric isotopological meshes holding the same connectivity. The efficiency and the robustness of the proposed approach are illustrated through several examples of reduced order models using IGA (IsoGeometric Analysis)
Mate, Samuel Spicer. "Anthropometric human modeling on the shape manifold." Thesis, University of Iowa, 2016. https://ir.uiowa.edu/etd/3139.
Повний текст джерелаHa, Jin-cheol. "Real-time visual tracking using image processing and filtering methods." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/28177.
Повний текст джерелаCommittee Chair: Eric N. Johnson; Committee Co-Chair: Allen R. Tannenbaum; Committee Member: Anthony J. Calise; Committee Member: Eric Feron; Committee Member: Patricio A. Vela.
Das, Abhishek. "Shape variation modelling, analysis and statistical control for assembly system with compliant parts." Thesis, University of Warwick, 2016. http://wrap.warwick.ac.uk/80049/.
Повний текст джерелаLekadir, Karim. "Medical Image Segmentation and Analysis using Statistical Shape Modelling and Inter-Landmark Relationships." Thesis, Imperial College London, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.508994.
Повний текст джерелаHorkaew, Paramate. "Statistical modelling of complex topological shapes with application to cardiovascular imaging." Thesis, Imperial College London, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.412014.
Повний текст джерелаRorato, Riccardo. "Imaging and discrete modelling of sand shape." Doctoral thesis, Universitat Politècnica de Catalunya, 2019. http://hdl.handle.net/10803/668045.
Повний текст джерелаSe sabe que la forma de las partículas juega un papel importante en el comportamiento del suelo, con efectos significativos de las respuestas mecánicas relevantes en ingeniería geotécnica. Por lo tanto, investigar cómo se puede medir y cuantificar la forma de las partículas se considera cada vez más importante en la mecánica del suelo moderna. Esto se acrecienta debido a las técnicas de análisis computacionales de imágenes y algoritmos de modelado discreto (DEM), que han abierto nuevas formas de abordar este problema. Este trabajo demuestra cómo se pueden hacer que estas dos técnicas funcionen juntas. Los análisis de imagen se realizan sobre micro-tomografías de rayos X (µ-CT) de muestras de arena en celdas triaxiales, centrándose en la caracterización y cuantificación de la forma de las partículas. Se estudian en detalle dos arenas con la forma de sus partículas muy diferentes: Caicos ooids (redondeados) y Hostun sand (angular). Luego se utiliza un algoritmo discreto de correlación de volumen digital (DVC) para rastrear la cinemática de granos individuales (alrededor de 50000 por cada muestra de arena) durante la prueba triaxial y medir, con buena precisión, sus desplazamientos y rotaciones acumulados. El análisis conjunto de la forma y las bases de datos cinemáticas adquiridas se realiza para encontrar cómo los descriptores de forma de partículas se relacionan con la cinemática observada a nivel de micro-escala. Resulta que la esfericidad verdadera predice bien el límite superior de rotación de una partícula. La modelización numérica se basa en el Método de Elementos Discretos (DEM). Los modelos que introducen resistencia a la rotación en el contacto se emplean ampliamente en simulaciones DEM, estos enfoques ofrecen beneficios computacionales sustanciales a costa de una mayor complejidad de calibración. En este trabajo, los valores de esfericidad verdadera (i.e., true sphericity) obtenidos mediante análisis de imagen de los granos, ya sea directamente por adquisición 3D o por correlación con medidas de forma 2D más simples, se utilizan para establecer restricciones de rotación mecánicamente equivalentes. Una relación empírica entre un parámetro de contacto (rolling friction) y un descriptor de forma de grano 3D (la esfericidad verdadera) se calibra primero, utilizando los resultados de la escala de muestras y de la escala de granos de dos pruebas triaxiales en las arenas de Hostun y de Caicos. Luego se valida simulando otras pruebas triaxiales (1) con las mismas arenas, pero en diferentes condiciones (2) con arena de Ottawa, para la que también estaban disponibles imágenes 3D de granos para su examen, y (3) con arena de Ticino, para la cual solo estaban disponibles imágenes 2D de los granos. Finalmente, se presentan resultados de simulaciones DEM a gran escala de la prueba de penetración de cono (CPT), aprovechando el nuevo modelo de contacto propuesto. Los datos experimentales del CPT realizado en una cámara de calibración (CC) sobre arena de Ticino se ajustan con éxito por las curvas de penetración numérica a diferentes presiones y condiciones de confinamiento. Un estudio paramétrico sobre la influencia de la forma de las partículas y la variabilidad de las formas de las partículas puso de manifiesto los efectos fuertemente acoplados de las resistencias rotacional y friccional en los contactos entre partículas. El trabajo descrito en esta tesis facilitará el uso de DEM para simulaciones a gran escala en problemas de ingeniería geotécnica.
Fouefack, Jean-Rassaire. "Towards a framework for multi class statistical modelling of shape, intensity, and kinematics in medical images." Doctoral thesis, Faculty of Health Sciences, 2021. http://hdl.handle.net/11427/33746.
Повний текст джерелаEghlio, Ramadan Mahmoud. "Laser net shape welding of steels." Thesis, University of Manchester, 2012. https://www.research.manchester.ac.uk/portal/en/theses/laser-net-shape-welding-of-steels(c5275bf1-ac62-4195-9d4e-61d1973d1b6f).html.
Повний текст джерелаSpies, Ruben Daniel. "Mathematical modelling, finite dimensional approximations and sensitivity analysis for phase transitions in shape memory alloys." Diss., This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-06062008-165948/.
Повний текст джерелаSandholm, Thomas. "Statistical Methods for Computational Markets : Proportional Share Market Prediction and Admission Control." Doctoral thesis, KTH, Data- och systemvetenskap, DSV, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4738.
Повний текст джерелаQC 20100909
Paranjape, Harshad Madhukar. "Modeling of Shape Memory Alloys: Phase Transformation/Plasticity Interaction at the Nano Scale and the Statistics of Variation in Pseudoelastic Performance." The Ohio State University, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=osu1417605178.
Повний текст джерелаKlíma, Ondřej. "Rekonstrukce tvaru polygonálních modelů." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2013. http://www.nusl.cz/ntk/nusl-412883.
Повний текст джерелаBartels, Brandon L. "Heterogeneity in Supreme Court decision making how situational factors shape preference-based behavior /." Columbus, Ohio : Ohio State University, 2006. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1148557321.
Повний текст джерелаMackenzie, Anne I. Rao S. M. "Paired pulse basis functions and triangular patch modeling for the method of moments calculation of electromagnetic scattering from three-dimensional, arbitrarily-shaped bodies." Auburn, Ala., 2008. http://hdl.handle.net/10415/1447.
Повний текст джерелаDeng, Jie. "Vibroacoustic modeling of acoustic blackhole applications in flat, curved andcomplex mechanical structures." Doctoral thesis, Universitat Ramon Llull, 2020. http://hdl.handle.net/10803/670666.
Повний текст джерелаLos agujeros negros acústicos en mecánica (conocidos por las siglas ABHs, del inglés Acoustic Black Holes) suelen estar formados por muescas en vigas y placas, el grueso de las cuales decae según una ley potencial. El efecto del ABH es el de ralentizar las velocidades de fase y de grupo de las ondas de flexión incidentes de tal modo que, en teoría, haría falta un tiempo infinito para que las ondas alcanzaran el centro del ABH, si el grueso de este último fuera exactamente cero. Sin embargo, en la práctica esto no es posible, aunque se puede conseguir una fuerte disipación colocando una capa de material amortiguador en el centro del ABH, donde se concentra la mayor parte de la energía de las ondas. En los últimos años, los ABHs no sólo se han explotado como método pasivo para reducir vibraciones estructurales y la consecuente emisión de ruido, sino que también se ha explorado su potencial para otras aplicaciones como la manipulación de ondas o la captación de energía. Esta tesis tiene tres objetivos principales. Así pues, tras una introducción general a los ABHs, el trabajo se ha dividido en tres grandes secciones. La primera aborda aplicaciones de los ABHs en vigas rectas y placas planas. Para empezar, se propone y analiza un voladizo piezoeléctrico con un acabado de ABH para capturar energía. A continuación, se presentan ABHs en forma de anillo para aislar puntos de excitación externos en placas planas y así evitar la transmisión de vibraciones. Finalmente, se contemplan configuraciones periódicas de matrices de ABHs para colimar haces de ondas de flexión y concentrar su energía en zonas predeterminadas de una placa. La segunda parte de la tesis propone nuevos diseños de ABHs para estructuras con curvatura. Estas son muy habituales en los sectores naval, aeronáutico e industrial, por lo que merece la pena investigar si los ABH pueden dar buenos resultados en algunos casos. La sección comienza analizando la inclusión de ABHs en vigas circulares y se ve como estos dan pie a la aparición de fenómenos típicos de sistemas periódicos. Seguidamente se propone un ABH anular para reducir las vibraciones en conductos cilíndricos. En concreto, se tratan los casos de un conducto simplemente soportado con un ABH anular, y el de un conducto con ABH, soportes periódicos y rigidificadores. Para finalizar la sección, se investigan los efectos de los ABH anulares en la radiación acústica del conducto teniendo en cuenta el nivel de potencia acústica, la eficiencia de radiación y la intensidad supersónica. La tercera parte de la tesis es más corta que las anteriores y simula el aislamiento de una placa con múltiples ABHs, en el rango de media y alta frecuencia. A tal efecto se emplea el método del análisis estadístico de distribución modal de energía (SmEdA: statistical modal energy distribution analysis). En esta sección, la estructura con ABHs ya no se analiza como un elemento individual, sino que se acopla a dos cavidades de aire formando parte de un sistema mecánico más complejo. A lo largo de la tesis se utiliza repetidamente el método de expansión gaussiana (GEM: Gaussian expansión method). Por GEM entendemos tomar funciones gaussianas como base para resolver ecuaciones diferenciales en derivadas parciales en el marco del método de Rayleigh-Ritz. El GEM se parece mucho a los enfoques de ondículas, pero ofrece algunas ventajas en el caso de condiciones de contorno periódicas. Al principio de la tesis se expone un breve repaso del GEM y, cuando es necesario, se aborda su reformulación para un problema particular en el capítulo correspondiente.
Acoustic black holes (ABHs) in mechanics usually consist of geometrical indentations on beams and plates having a power-law decreasing thickness profile. An ABH slows down the phase and group velocity of incident flexural waves in such a way that, ideally, it would take an infinite amount of time for them to reach the ABH center, if the latter had an exact zero thickness. Though this is not possible in practice, strong wave dissipation can be achieved by placing a damping layer at the central region of the ABH, where most vibration energy concentrates. In recent years, ABHs have been not only exploited as a passive means for structural vibration and noise reduction, but its potential for other applications like wave manipulation or energy harvesting have been also explored. The objective of this thesis is threefold. Therefore, after an initial overview the work is divided into three main parts. The first one deals with ABH applications on straight beams and flat plates. To start with, an ABH piezoelectric bimorph cantilever for energy harvesting is proposed and analyzed. Then, ring-shaped ABH indentations are suggested as a means of isolating external excitation points in flat plates and prevent vibration transmission. Finally, periodic ABH array configurations are contemplated to collimate flexural wave beams and focus energy at desired plate locations. The second part of the thesis proposes new ABH designs for curved structures. The latter are very common in the naval, aeronautical and industrial sectors so it is worth investigating if ABHs could function for them. The section starts analyzing the embedding of ABHs on circular beams and how this results in the appearance of typical phenomena of periodic systems. After that, an annular ABH is proposed to reduce vibrations in cylindrical shells. The cases of a simply supported shell with an annular ABH indentation and of a periodic simply supported ABH shell with stiffeners are considered. To finish the section, the effects of annular ABHs on sound radiation are investigated in terms of sound power level, radiation efficiency and supersonic intensity. The third part of the thesis is shorter than the previous ones and is devoted to analyzing the transmission loss of a plate with multiple ABH indentations, in the mid-high frequency range. Statistical modal energy distribution analysis is used for that purpose. Here, the ABH plate is not taken as an individual structure but coupled to two air cavities, thus being part of a more complex mechanical system. Throughout the thesis repeated use is made of the Gaussian expansion method (GEM). The GEM refers to taking Gaussian functions as the basis for solving partial differential equations in the framework of the Rayleigh-Ritz method. The GEM closely resembles wavelet approaches but offers some advantages in the case of periodic boundary conditions. A brief overview of the GEM is exposed at the beginning of the thesis and, when necessary, its reformulation for a particular problem is tackled in its corresponding chapter.
Bucci, Francesca. "Personalized biomechanical model of a patient with severe hip osteoarthritis for the prediction of pelvic biomechanics." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018. http://amslaurea.unibo.it/15879/.
Повний текст джерелаAltun, Naci Emre. "Beneficiation Of Himmetoglu And Beypazari Oil Shales By Flotation And Their Thermal Characterization As An Energy Source." Phd thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/2/12606990/index.pdf.
Повний текст джерела#8217
s great oil shale reserves.
Casero, Cañas Ramón. "Left ventricle functional analysis in 2D+t contrast echocardiography within an atlas-based deformable template model framework." Thesis, University of Oxford, 2008. http://ora.ox.ac.uk/objects/uuid:b17b3670-551d-4549-8f10-d977295c1857.
Повний текст джерелаHufnagel, Heike. "A probabilistic framework for point-based shape modeling in medical image analysis." Phd thesis, 2010. http://tel.archives-ouvertes.fr/tel-00844717.
Повний текст джерелаMelińska, Aleksandra. "Statistical, anatomical shape modelling of tarsal bones." Rozprawa doktorska, 2017. https://repolis.bg.polsl.pl/dlibra/docmetadata?showContent=true&id=41617.
Повний текст джерелаMelińska, Aleksandra. "Statistical, anatomical shape modelling of tarsal bones." Rozprawa doktorska, 2017. https://delibra.bg.polsl.pl/dlibra/docmetadata?showContent=true&id=41617.
Повний текст джерелаZhang, Jing. "Time Series Modeling with Shape Constraints." Thesis, 2017. https://doi.org/10.7916/D84X5M55.
Повний текст джерелаAouada, Djamila. "Geometric, statistical, and topological modeling of intrinsic data manifolds application to 3D shapes /." 2009. http://www.lib.ncsu.edu/theses/available/etd-03232009-204551/unrestricted/etd.pdf.
Повний текст джерелаWang, Xiaojing. "Bayesian Modeling Using Latent Structures." Diss., 2012. http://hdl.handle.net/10161/5848.
Повний текст джерелаThis dissertation is devoted to modeling complex data from the
Bayesian perspective via constructing priors with latent structures.
There are three major contexts in which this is done -- strategies for
the analysis of dynamic longitudinal data, estimating
shape-constrained functions, and identifying subgroups. The
methodology is illustrated in three different
interdisciplinary contexts: (1) adaptive measurement testing in
education; (2) emulation of computer models for vehicle crashworthiness; and (3) subgroup analyses based on biomarkers.
Chapter 1 presents an overview of the utilized latent structured
priors and an overview of the remainder of the thesis. Chapter 2 is
motivated by the problem of analyzing dichotomous longitudinal data
observed at variable and irregular time points for adaptive
measurement testing in education. One of its main contributions lies
in developing a new class of Dynamic Item Response (DIR) models via
specifying a novel dynamic structure on the prior of the latent
trait. The Bayesian inference for DIR models is undertaken, which
permits borrowing strength from different individuals, allows the
retrospective analysis of an individual's changing ability, and
allows for online prediction of one's ability changes. Proof of
posterior propriety is presented, ensuring that the objective
Bayesian analysis is rigorous.
Chapter 3 deals with nonparametric function estimation under
shape constraints, such as monotonicity, convexity or concavity. A
motivating illustration is to generate an emulator to approximate a computer
model for vehicle crashworthiness. Although Gaussian processes are
very flexible and widely used in function estimation, they are not
naturally amenable to incorporation of such constraints. Gaussian
processes with the squared exponential correlation function have the
interesting property that their derivative processes are also
Gaussian processes and are jointly Gaussian processes with the
original Gaussian process. This allows one to impose shape constraints
through the derivative process. Two alternative ways of incorporating derivative
information into Gaussian processes priors are proposed, with one
focusing on scenarios (important in emulation of computer
models) in which the function may have flat regions.
Chapter 4 introduces a Bayesian method to control for multiplicity
in subgroup analyses through tree-based models that limit the
subgroups under consideration to those that are a priori plausible.
Once the prior modeling of the tree is accomplished, each tree will
yield a statistical model; Bayesian model selection analyses then
complete the statistical computation for any quantity of interest,
resulting in multiplicity-controlled inferences. This research is
motivated by a problem of biomarker and subgroup identification to
develop tailored therapeutics. Chapter 5 presents conclusions and
some directions for future research.
Dissertation
Pati, Debdeep. "Bayesian Nonparametric Modeling and Theory for Complex Data." Diss., 2012. http://hdl.handle.net/10161/5564.
Повний текст джерелаThe dissertation focuses on solving some important theoretical and methodological problems associated with Bayesian modeling of infinite dimensional `objects', popularly called nonparametric Bayes. The term `infinite dimensional object' can refer to a density, a conditional density, a regression surface or even a manifold. Although Bayesian density estimation as well as function estimation are well-justified in the existing literature, there has been little or no theory justifying the estimation of more complex objects (e.g. conditional density, manifold, etc.). Part of this dissertation focuses on exploring the structure of the spaces on which the priors for conditional densities and manifolds are supported while studying how the posterior concentrates as increasing amounts of data are collected.
With the advent of new acquisition devices, there has been a need to model complex objects associated with complex data-types e.g. millions of genes affecting a bio-marker, 2D pixelated images, a cloud of points in the 3D space, etc. A significant portion of this dissertation has been devoted to developing adaptive nonparametric Bayes approaches for learning low-dimensional structures underlying higher-dimensional objects e.g. a high-dimensional regression function supported on a lower dimensional space, closed curves representing the boundaries of shapes in 2D images and closed surfaces located on or near the point cloud data. Characterizing the distribution of these objects has a tremendous impact in several application areas ranging from tumor tracking for targeted radiation therapy, to classifying cells in the brain, to model based methods for 3D animation and so on.
The first three chapters are devoted to Bayesian nonparametric theory and modeling in unconstrained Euclidean spaces e.g. mean regression and density regression, the next two focus on Bayesian modeling of manifolds e.g. closed curves and surfaces, and the final one on nonparametric Bayes spatial point pattern data modeling when the sampling locations are informative of the outcomes.
Dissertation