Книги з теми "Solution-types"

The tutorial discusses the current state of the transport system of Russia, types and marking of goods, terms of delivery of goods characteristics of modes of transport; describes the types of cargo and performance evaluation of transport; the data for the practical solution of situational tasks and test questions for independent work and test knowledge. Meets the requirements of Federal state educational standards of higher education of the last generation. For undergraduate students enrolled in field of study "trading business" and other economic areas.

In this manual some methods and algorithms of data processing, the sequence of the solution of problems of processing and the analysis of data for creation of behavior model of an object taking into account all a component of his mathematical model are considered. Types of technological methods of use of software and hardware for the solution of tasks in this area are described. Algorithms of distributions, regressions of temporary ranks, their transformation for the purpose of receiving mathematical models and the forecast of behavior of information and economic systems (objects) are considered. Conforms to requirements of the Federal state educational standard of the higher education of the last generation. For students of economic specialties, experts, graduate students.

The monograph is devoted to the study of legal, theoretical and forensic issues that arise in the investigation of fraud committed by Bank employees in the field of lending. The features of their solution are defined, specific recommendations are developed aimed at forming an effective mechanism for investigating the analyzed type of crimes. The results of the studied practical material are presented. It is a complete scientific study and is intended for forensic scientists, law enforcement officers, teachers, graduate students and students of law schools and faculties who are interested in the problems of investigating certain types of crimes.

The textbook covers the main sections of the course "Demography": the object, subject and methods of demography, connection with other sciences; sources of data on the population; the main types and factors of population movement, modes of natural reproduction of the population; migration and reproduction of the population; demographic, ethnic and religious structure of the population; demographic policy of the state. Meets the requirements of the federal state educational standards of higher education of the latest generation. For students of higher educational institutions studying under the bachelor's degree programs 38.03.04 and master's degree programs 38.04.04 in the direction of "State and Municipal Management", as well as for all those interested in demographic problems and their solution.

The textbook comprehensively describes the basics of the theory of economic analysis and the practice of applying analytical approaches to economic entities of various types. It consists of three interrelated sections that reveal a comprehensive and systematic approach to conducting economic analysis. The practical part of the textbook includes exercises, examples of solving situational problems and tasks for independent solution. Meets the requirements of the federal state educational standards of secondary vocational education of the latest generation. For students of secondary vocational education institutions studying in the specialty 38.02.07 "Banking". It can be useful for undergraduate students studying in the areas of 38.03.01 " Economics "and 38.03.02" Management", specialists in the field of analysis of the activities of organizations, a wide range of readers interested in the problems of analysis of the activities of economic entities.

In the proposed monograph, optimization models for managing limited resources in logical systems are considered. Such systems are primarily used by industrial enterprises, transport companies and trade organizations, including those that carry out wholesale activities. As a rule, the efficiency of these objects largely depends on how rational use of limited resources such as: consumer camera business, labor, vehicles, etc. In this paper, various approaches to managing such resources are considered both for deterministic models and for the situation when a number of model parameters are not specified exactly, that is, for stochastic models. In this case, it is proposed to evaluate the stability of models to the occurrence of various types of risk events, both by the structure of the solution and by the functionality. It is addressed to senior students, postgraduates and masters studying in the specialty "Management" and "Logistics", as well as specialists in the field of logistics systems modeling.

The study of the course "Leadership" is associated with an increasing demand for the formation and disclosure of human leadership potentials. The presented textbook allows you to carry out this work in a targeted way. It summarizes and systematizes the world experience in the development of the theory and practice of leadership, discusses the classification of types of leaders, issues of practical use in leadership scenarios of personal qualities of a person, and offers a methodology for developing team strategies and team building. The distinctive features of the proposed program are its adaptability to the socio-cultural context of Russian society and its strong connection with the task of training the future generation of leaders in the interests of the Russian state. Each of the sections of the textbook is accompanied by practical tasks, the solution of which develops the skills of self-knowledge of a person in the perspective of developing leadership potentials and understanding the variability of leadership strategies. It is focused primarily on the preparation of bachelors studying in pedagogical areas of training, but it can also serve as a basic source for training in the course "Leadership" within the framework of a bachelor's degree in the humanities and the direction of social sciences.

If you are holding this textbook in your hands, it means that you understand the need to solve problems when studying a physics course at school. Indeed, it is difficult to overestimate the effect that the solution of problems in the study of physics gives. The textbook contains about 800 problems for the high school physics course. The tasks are based on the examination materials of various universities, including the Republic of Crimea, data from the magazines "Kvant", "Physics at School", information received from correspondence physics and mathematics schools of the Moscow State University named after M. V. Lomonosov, National Research Nuclear University "MEPhI", Bauman Moscow State Technical University, Moscow Institute of Physics and Technology (State University). We also used the problem books that were released in various years to help those entering universities. The number of problems and their selection are not random and allow, according to the compilers, to demonstrate the types of problems that are often found in the high school physics course, the most rational methods, general approaches and ideas for solving them, and also help to acquire certain skills in solving problems. Can be useful for use in secondary schools when working with students for whom physics is of interest, optional, if you prepare for the entrance exams for physics, a specialized school with advanced study of physics, as well as anyone who wants to learn how to solve problems in physics.

The monograph is devoted to the methodology of material and technical support of railway transport. According to the types of activities, the nature of the material and technical resources used, technologies, means and management systems, Russian railways belong to the category of high-tech industries that must have high quality and technical level, reliability and technological efficiency in operation. For this reason, the logistics system itself, both in structure and in the algorithm of the functions performed as a whole, needs a serious improvement in the quality of its work. The economic situation in Russia requires a revision of the principles and mechanisms of management based on the corporate model of supply chain management, focused on logistics knowledge. In the difficult economic conditions of the current decade, it is necessary to improve the quality of the supply organization of enterprises and structural divisions of railway transport, directly related to the implementation of the process approach, the advantage of which is a more detailed regulation of management actions and their mutual coordination. In order to increase the efficiency of its activities and develop the management system, Russian Railways is developing a lean production system aimed at further expanding the implementation of the principles of customer orientation, ideology and corporate culture. At the present time, the solution of many issues is impossible without a cybernetic approach to the formulation of problems of material and technical support and logistics analysis of information technologies, to the implementation of the developed algorithms and models of development strategies and concepts for improving the business processes of the production system. The management strategy, or the general plan for the implementation of activities for the management of material resources, is based on a fundamental assessment of the alignment and correlation of forces and factors operating in the economic and political field, taking into account the impact on the specific form of the management strategy. The materials will be useful to the heads and specialists of the directorates of the MTO, CDZs and can be used in the scientific research of bachelors, masters and postgraduates interested in the economics of railway transport and supply logistics.

This chapter introduces the model problems and the solution operator for the associated heat equations. These operators give a good approximation for the behavior of the heat kernel in neighborhoods of different types of boundary points. The chapter states and proves the elementary features of these operators and shows that the model heat operators have an analytic continuation to the right half plane. It first considers the model problem in 1-dimension and in higher dimensions before discussing the solution to the homogeneous Cauchy problem. It then describes the first steps toward perturbation theory and constructs the solution operator for generalized Kimura diffusions on a suitable scale of Hölder spaces. It also defines the resolvent families and explains why the estimates obtained here are not adequate for the perturbation theoretic arguments needed to construct the solution operator for generalized Kimura diffusions.

This chapter provides an introduction to small angle solution scattering with particular reference to the complementary technique of X-ray crystallography and the relationship between the two. It describes at its most basic level the theoretical underpinnings of solution scattering starting from a single molecule and how this information is sampled in crystals versus in solution. A brief introduction is given to some of the primary types of structural information that can be obtained from experiments. The chapter concludes discussing some of the most common applications of the technique in structural biology, and where the future is likely headed.

Two types of specimens were studied based on applying the nonlinear theory of flexible plates to obtain the interlaminar fracture toughness of layered composites. For a specimen of the thin sub-layer type, a theoretical solution was obtained in relation to the determination of the interlaminar fracture toughness for a mixed II/I mode. The fundamental possibility of using this solution in test practice was confirmed. The application of the nonlinear theory of flexible plates to the well-known standard specimen of the double-cantilever beam (DCB) was studied in more detail. A theoretical solution was obtained, an iterative algorithm for processing test results based on MATLAB code was developed, highly flexible glass fiber reinforced polymer (GFRP) specimens were tested and their comparison with the results of processing according to the ASTM D 5528-01 standard with correction of the linear solution was given.

This chapter reviews the Laplacian and the d'Alembertian. It begins with a brief discussion on the solution of wave equation both in Euclidean space and on manifolds and how this knowledge can be used to derive properties of eigenfunctions on Riemannian manifolds. A key step in understanding properties of solutions of wave equations on manifolds is to compute the types of distributions that include the fundamental solution of the wave operator in Minkowski space (d'Alembertian), with a specific function for the Euclidean Laplacian on Rn. The chapter also reviews another equation involving the Laplacian, before discussing the fundamental solutions of the d'Alembertian in R1+n.

The work of Chapman and Enskog opened a long period, lasting about three decades, in which most of the activity in kinetic theory was directed to the computation of the transport coefficients for different types of intermolecular potentials. Seeking the solution of the full Boltzmann equation itself was not much in focus, mostly on account of its daunting complexity. This situation took a sharp turn in 1949, with the publication of Harold Grad’s thesis. This Chapter presents the derivation of generalized hydrodynamics beyond the realm of the Navier-Stokes description, with special reference to Grad’s thirteen-moment formulation.

This chapter summarizes the essential principles and approach of India’s traditional medicine, Ayurveda, to healing sexual problems. In Ayurveda there is no one-size-fits-all solution; rather, it defines constitutional types (doshas) according to the balance of elements and gives guidelines for sexual activity for each dosha. Health is said to begin with digestion, and Ayurveda offers a nuanced theory of how digestion may create either toxins (ama) or life force (ojas). Ojas is the basis of cellular reproduction, vitality, and sexual health. This chapter also offers gender- and dosha-specific herbal prescriptions for treating such sexual problems as low libido, premature ejaculation, vaginal dryness, erectile dysfunction, and anorgasmia.

Eating disorders are one of the most common problems that school social workers encounter with their students. This chapter begins with an overview of eating disorders, including definitional and descriptive information, causative factors, and student impacts. The chapter focuses on the three most common types of eating disorders, which are anorexia nervosa, bulimia nervosa, and binge eating disorder. Next, rationale for using a Solution-Focused Brief Therapy approach will be presented and a discussion for why it is a good fit for working with students who have eating disorders. Following the rationale, a case study will demonstrate the use of SFBT techniques by a school social worker in a therapy session with a student experiencing an eating disorder.

Chapter 9 argues first that the assignment of a status function to an object or type of object for use on repeated occasions constitutes a convention. The relevant notion of convention is that of collective acceptance by a group of a solution to a coordination problem. This is contrasted with David Lewis’s account of convention. Next, it provides an analysis of collective acceptance as a matter of members of a group having either appropriately interlocking we-intentions directed at particular objects or appropriately interlocking conditional we-intentions directed at objects or types of objects. Finally, it explains, in light of this, in what sense a status function is an intention dependent function, that is, a function that cannot be performed by an object having it unintentionally.

Does the contextualist seek to dissolve disputes over skepticism in such a way that all parties to them come out being right? And does she use a “perfectly general strategy” for doing so? Is she ignoring the traditional epistemological topic of whether we really know things, instead addressing how the word “know” is or should be used? Is she engaged in philosophy of language instead of epistemology? Is she addressing the more important types of skeptic? Are key aspects of her position inexpressible, by her own lights? Is she subject to a “factivity problem”? These and other questions are answered in this chapter, as the contextualist aspects of the solution to skepticism from Chapter 1 are carefully explained and defended from objections.

This chapter analyzes the role of contingent scenarios and nature of the defaults. Over the last 800 years, many periods of debt accumulation have been followed by default. Despite these disruptions, the market for sovereign debt did not disappear. At least, in the case of asiento lending to Philip II, excusable defaults were an important factor. Studying the loan documents directly, the chapter shows that a significant share of short-term loans contained contingency clauses. It then explores the different types of loan modifications along with their impact on cash flows and loan maturity. These modifications allowed effective risk sharing between king and bankers—an institutional solution that offered many of the desirable properties that contingent debt would have today.

This book examines a wide range of emerging sources off water pollution. It consists of thirteen chapters dedicated to the topic, giving readers comprehensive information about the types of materials involved and the solution for their removal. The first five chapters present an analysis of the emerging water pollutants, their toxicities, legislations available to monitor and regulate their emissions. This introduction is followed by 3 chapters that cover risk assessment of emerging pollutants, their fate and life cycle assessment. The last section of the book goes through the details of remediation technologies for wastewater treatment. This reference is equally suitable for academia, industry professionals and students, presenting state-of-the-art learnings on emerging water pollutants and their remediation methods.

This chapter makes a case for morphemes as zones of functional sequence (fseq zones) in nanosyntax. Under such an approach, morphemes that compete for insertion with each other form the same fseq zone, whereas morphemes that co-occur together form different fseq zones. We illustrate this on the basis of the participle zone that is projected on top of verb stems in Slavic languages. We argue that in Polish and Czech, this participle zone spells out as L, T, or N, depending on its size and internal constituent structure. The constituent structure of this zone provides a direct solution to a long-standing puzzle in Polish and Czech morphology, namely why only unaccusative verbs build adjectival L-passives whereas all types of verbs build active L-participles.

In this chapter I provide four detailed, cross-disciplinary case studies, developed for this book. The case studies are from the medical sciences, political science, and finance. In each case, I discuss the empirical background, the input information, the necessary analytics, the inferred solution, and a brief summary of its implications. Each problem highlights one basic issue and demonstrates the advantage and applicability of the info-metrics framework. In each one of the problems analyzed, the constraints are specified as stochastic. Thus, the inference tolerates possible misspecification in the constraints or other possible uncertainties in the data or the model. This chapter demonstrates that the info-metrics framework is general enough to tackle problems across the scientific spectrum, can accommodate all types of uncertainties, can solve problems that other methods are unable to solve, and always allows the use of priors.

The processing of a linguistic expression, when viewed as a complex of (Specifier)-Head-Complement(s) phrases (SHCs), whilst suggestive of a recursive solution—that is, a sentence is a matrix SHC (subject-verb-object) composed of internal SHCs and the completion of the overall task is divisible into smaller but equivalent subtasks—in fact proceeds iteratively. This is here shown by manipulating the memory load of processing SHCs and measuring the reaction times of participants to extraneous tones placed at specific places within a sentence. The results show that there is a decreasing tendency in reaction times across a sentence, this pattern being explained in terms of two different types of uncertainty, a linguistic type and a more perceptual type. The results are discussed in the context of classic results with the tone-monitoring technique and future work along these lines is announced.

After a historical account of the evolution which led to the concept of Molecular Electronics, the “Hybrid Molecular Electronics” approach (that is, molecules connected to nanosized metallic electrodes) is discussed. The different types of transport (one-step, two-step with different forms of tunnelling) are described, including the case where the molecule is paramagnetic (Kondo resonance). Several molecular achievements are presented: wires, diodes, memory cells, field-effect transistors, switches, using molecules, but also carbon nanotubes. A spin-off result is the possibility of imaging Molecular Orbitals. The emerging field of molecular spintronics is presented. Besides hybrid devices, examples are given of electronic functionalities using ensembles of molecules, either in solution (logical functions) or in the solid state (memory elements). The relation with the domain of Quantum Computing is presented, including the particular domain of Quantum Hamiltonian Computing. The chapter finishes by an introduction to molecular machines, with the problem of the directional control of their motion.

This chapter posits a parameter hierarchy to capture micro-parametric variation in ergative (or rather non-accusative) alignment, building on the proposal that ergative is an inherent case, assigned by little vs. Initial parameters determine the distribution of this inherent case across instances of little v in a given language, sensitive to various thematic features, and subsequent dependent parameters determine further properties of ergative-assigning vs such as the presence of a movement trigger and the suppression of structural Case features. This gives rise to a number of distinct ergative types depending on the distribution of ergative case, the presence/absence of syntactic ergativity, and the source of absolutive case in transitive contexts. The resultant parameter hierarchy serves to restrict the space of variation, modeling a number of proposed implicational universals in this domain, and provides a potential solution to the subset problem in acquisition by encoding a notion of relative markedness.

Choice is a key concept of our time. It is a foundational mechanism for every legal order in societies that are, politically, constituted as democracies and, economically, built on the market mechanism. Thus, choice can be understood as an atomic structure that grounds core societal processes. In recent years, however, the debate over the right way to theorise choice—for example, as a rational or a behavioural type of decision making—has intensified. This collection therefore provides an in-depth discussion of the promises and perils of specific types of theories of choice. It shows how the selection of a specific theory of choice can make a difference for concrete legal questions, in particularly in the regulation of the digital economy or in choosing between market, firm, or network. In its first part, the volume provides an accessible overview of the current debates about rational versus behavioural approaches to theories of choice. The remainder of the book structures the vast landscape of theories of choice along three main types: individual, collective, and organisational decision making. As theories of choice proliferate and become ever more sophisticated, however, the process of choosing an adequate theory of choice becomes increasingly intricate, too. This volume addresses this selection problem for the various legal arenas in which individual, organisational, and collective decisions matter. By drawing on economic, technological, political, and legal points of view, the volume shows which theories of choice are at the disposal of the legally relevant decision maker, and how they can be implemented for the solution of concrete legal problems.

Integrative Addiction and Recovery is a book discussing the epidemic of addiction that is consuming our friends, family, and community nationwide. In 2016, there were 64,000 drug overdoses, and addiction became the top cause of accidental death in America in 2015. We are in a crisis and in need of a robust and integrated solution. We begin with the definition of addiction, neurobiology of addiction, and the epidemiology of varying substances of abuse and treatment guidelines. Section II reviews different types of addiction such as food, alcohol, sedative-hypnotics, cannabis, stimulants (such as cocaine and methamphetamine), opiates (including prescription and illicit opiates), and tobacco, and evidence-based approaches for their treatment using psychotherapy, pharmacotherapy, as well as holistic treatments including acupuncture, nutraceuticals, exercise, yoga, and meditation. We also have chapters on behavioral addictions and hallucinogens. Section III reviews co-occurring disorders and their evidence-based integrative treatment and also overviews the holistic therapeutic techniques such as acupuncture and TCM, Ayurveda, homeopathy, nutrition, nutraceuticals, art and aroma therapy, and equine therapy as tools for recovery. We have unique chapters on shamanism and ibogaine, as well as spirituality and group support (12 steps included). The final section deals with challenges facing recovery such as trauma, acute/chronic pain, and post acute withdrawal. Integrative Addiction and Recovery is an innovative and progressive textbook, navigating this complex disease with the most comprehensive approach.

The world is at a pivotal crossroad in energy choices. There is a strong sense that our use of energy must be more sustainable. Moreover, many also broadly agree that a way must be found to rely increasingly on lower carbon energy sources. However, no single or clear solution exists on the means to carry out such a shift at either a national or international level. Traditional energy planning (when done) has revolved around limited cost projections that often fail to take longer term evidence and interactions of a wider set of factors into account. The good news is that evidence does exist on such change in case studies of different nations shifting toward low-carbon energy approaches. In fact, such shifts can occur quite quickly at times, alongside industrial and societal advance, innovation, and policy learning. These types of insights will be important for informing energy debates and decision-making going forward. Low Carbon Energy Transitions: Turning Points in National Policy and Innovation takes an in-depth look at four energy transitions that have occurred since the global oil crisis of 1973: Brazilian biofuels, Danish wind power, French nuclear power, and Icelandic geothermal energy. With these cases, Dr. Araújo argues that significant nationwide shifts to low-carbon energy can occur in under fifteen years, and that technological complexity is not necessarily a major impediment to such shifts. Dr. Araújo draws on more than five years of research, and interviews with over 120 different scientists, government workers, academics, and members of civil society in completing this study. Low Carbon Energy Transitions is written for for professionals in energy, the environment and policy as well as for students and citizens who are interested in critical decisions about energy sustainability. Technology briefings are provided for each of the major technologies in this book, so that scientific and non-scientific readers can engage in more even discussions about the choices that are involved.

Economy and mankind are inextricably interlinked. Just as the economy or the production of material wealth is unimaginable without a man, so human existence and development are impossible without the wealth created in the economy. Shortly, both the goal and the means of achieving and realization of the economy are still the human resources. People have long ago noticed that it was the economy that created livelihoods, and the delays in their production led to the catastrophic events such as hunger, poverty, civil wars, social upheavals, revolutions, moral degeneration, and more. Therefore, the special interest of people in understanding the regulatory framework of the functioning of the economy has existed and exists in all historical epochs [A. Sisvadze. Economic theory. Part One. 2006y. p. 22]. The system of economic disciplines studies economy or economic activities of a society. All of them are based on science, which is currently called economic theory in the post-socialist space (the science of economics, the principles of economics or modern economics), and in most countries of the world - predominantly in the Greek-Latin manner - economics. The title of the present book is also Modern Economics. Economics (economic theory) is the science that studies the efficient use of limited resources to produce and distribute goods and services in order to satisfy as much as possible the unlimited needs and demands of the society. More simply, economics is the science of choice and how society manages its limited resources. Moreover, it should be emphasized that economics (economic theory) studies only the distribution, exchange and consumption of the economic wealth (food, beverages, clothing, housing, machine tools, computers, services, etc.), the production of which is possible and limited. And the wealth that exists indefinitely: no economic relations are formed in the production and distribution of solar energy, air, and the like. This current book is the second complete updated edition of the challenges of the modern global economy in the context of the coronary crisis, taking into account some of the priority directions of the country's development. Its purpose is to help students and interested readers gain a thorough knowledge of economics and show them how this knowledge can be applied pragmatically (professionally) in professional activities or in everyday life. To achieve this goal, this textbook, which consists of two parts and tests, discusses in simple and clear language issues such as: the essence of economics as a science, reasons for origin, purpose, tasks, usefulness and functions; Basic principles, problems and peculiarities of economics in different economic systems; Needs and demand, the essence of economic resources, types and limitations; Interaction, mobility, interchangeability and efficient use of economic resources. The essence and types of wealth; The essence, types and models of the economic system; The interaction of households and firms in the market of resources and products; Market mechanism and its elements - demand, supply and price; Demand and supply elasticity; Production costs and the ways to reduce them; Forms of the market - perfect and incomplete competition markets and their peculiarities; Markets for Production Factors and factor incomes; The essence of macroeconomics, causes and importance of origin; The essence and calculation of key macroeconomic indicators (gross national product, gross domestic product, net national product, national income, etc.); Macroeconomic stability and instability, unemployment, inflation and anti-inflationary policies; State regulation of the economy and economic policy; Monetary and fiscal policy; Income and standard of living; Economic Growth; The Corona Pandemic as a Defect and Effect of Globalization; National Economic Problems and New Opportunities for Development in the conditions of the Coronary Crisis; The Socio-economic problems of moral obsolescence in digital technologies; Education and creativity are the main solution way to overcome the economic crisis caused by the coronavirus; Positive and negative effects of tourism in Georgia; Formation of the middle class as a contributing factor to the development of tourism in Georgia; Corporate culture in Georgian travel companies, etc. The axiomatic truth is that economics is the union of people in constant interaction. Given that the behavior of the economy reflects the behavior of the people who make up the economy, after clarifying the essence of the economy, we move on to the analysis of the four principles of individual decision-making. Furtermore, the book describes how people make independent decisions. The key to making an individual decision is that people have to choose from alternative options, that the value of any action is measured by the value of what must be given or what must be given up to get something, that the rational, smart people make decisions based on the comparison of the marginal costs and marginal returns (benefits), and that people behave accordingly to stimuli. Afterwards, the need for human interaction is then analyzed and substantiated. If a person is isolated, he will have to take care of his own food, clothes, shoes, his own house and so on. In the case of such a closed economy and universalization of labor, firstly, its productivity will be low and, secondly, it will be able to consume only what it produces. It is clear that human productivity will be higher and more profitable as a result of labor specialization and the opportunity to trade with others. Indeed, trade allows each person to specialize, to engage in the activities that are most successful, be it agriculture, sewing or construction, and to buy more diverse goods and services from others at a relatively lower price. The key to such human interactions is that trade is mutually beneficial; That markets are usually the good means of coordination between people and that the government can improve the results of market functioning if the market reveals weakness or the results of market functioning are not fair. Moroever, it also shows how the economy works as a whole. In particular, it is argued that productivity is a key determinant of living standards, that an increase in the money supply is a major source of inflation, and that one of the main impediments to avoiding inflation is the existence of an alternative between inflation and unemployment in the short term, that the inflation decrease causes the temporary decline in unemployement and vice versa. The Understanding creatively of all above mentioned issues, we think, will help the reader to develop market economy-appropriate thinking and rational economic-commercial-financial behaviors, to be more competitive in the domestic and international labor markets, and thus to ensure both their own prosperity and the functioning of the country's economy. How he/she copes with the tasks, it is up to the individual reader to decide. At the same time, we will receive all the smart useful advices with a sense of gratitude and will take it into account in the further work. We also would like to thank the editor and reviewers of the books. Finally, there are many things changing, so it is very important to realize that the XXI century has come: 1. The century of the new economy; 2. Age of Knowledge; 3. Age of Information and economic activities are changing in term of innovations. 1. Why is the 21st century the century of the new economy? Because for this period the economic resources, especially non-productive, non-recoverable ones (oil, natural gas, coal, etc.) are becoming increasingly limited. According to the World Energy Council, there are currently 43 years of gas and oil reserves left in the world (see “New Commersant 2007 # 2, p. 16). Under such conditions, sustainable growth of real gross domestic product (GDP) and maximum satisfaction of uncertain needs should be achieved not through the use of more land, labor and capital (extensification), but through more efficient use of available resources (intensification) or innovative economy. And economics, as it was said, is the science of finding the ways about the more effective usage of the limited resources. At the same time, with the sustainable growth and development of the economy, the present needs must be met in a way that does not deprive future generations of the opportunity to meet their needs; 2. Why is the 21st century the age of knowledge? Because in a modern economy, it is not land (natural resources), labor and capital that is crucial, but knowledge. Modern production, its factors and products are not time-consuming and capital-intensive, but science-intensive, knowledge-intensive. The good example of this is a Japanese enterprise (firm) where the production process is going on but people are almost invisible, also, the result of such production (Japanese product) is a miniature or a sample of how to get the maximum result at the lowest cost; 3. Why is the 21st century the age of information? Because the efficient functioning of the modern economy, the effective organization of the material and personal factors of production largely depend on the right governance decision. The right governance decision requires prompt and accurate information. Gone are the days when the main means of transport was a sailing ship, the main form of data processing was pencil and paper, and the main means of transmitting information was sending letters through a postman on horseback. By the modern transport infrastructure (highways, railways, ships, regular domestic and international flights, oil and gas pipelines, etc.), the movement of goods, services and labor resoucres has been significantly accelerated, while through the modern means of communication (mobile phone, internet, other) the information is spreading rapidly globally, which seems to have "shrunk" the world and made it a single large country. The Authors of the book: Ushangi Samadashvili, Doctor of Economic Sciences, Associate Professor of Ivane Javakhishvili Tbilisi State University - Introduction, Chapters - 1, 2, 3, 4, 5, 6, 9, 10, 11,12, 15,16, 17.1,18 , Tests, Revaz Shengelia, Doctor of Economics, Professor of Georgian Technical University, Chapters_7, 8, 13. 14, 17.2, 17.4; Zhuzhuna Tsiklauri - Doctor of Economics, Professor of Georgian Technical University - Chapters 13.6, 13.7,17.2, 17.3, 18. We also thank the editor and reviewers of the book.

The quality of data collected in official spatial databases is crucial in making strategic decisions as well as in the implementation of planning and design works. Awareness of the level of the quality of these data is also important for individual users of official spatial data. The author presents methods and models of description and evaluation of the quality of spatial data collected in public registers. Data describing the space in the highest degree of detail, which are collected in three databases: land and buildings registry (EGiB), geodetic registry of the land infrastructure network (GESUT) and in database of topographic objects (BDOT500) were analyzed. The results of the research concerned selected aspects of activities in terms of the spatial data quality. These activities include: the assessment of the accuracy of data collected in official spatial databases; determination of the uncertainty of the area of registry parcels, analysis of the risk of damage to the underground infrastructure network due to the quality of spatial data, construction of the quality model of data collected in official databases and visualization of the phenomenon of uncertainty in spatial data. The evaluation of the accuracy of data collected in official, large-scale spatial databases was based on a representative sample of data. The test sample was a set of deviations of coordinates with three variables dX, dY and Dl – deviations from the X and Y coordinates and the length of the point offset vector of the test sample in relation to its position recognized as a faultless. The compatibility of empirical data accuracy distributions with models (theoretical distributions of random variables) was investigated and also the accuracy of the spatial data has been assessed by means of the methods resistant to the outliers. In the process of determination of the accuracy of spatial data collected in public registers, the author’s solution was used – resistant method of the relative frequency. Weight functions, which modify (to varying degree) the sizes of the vectors Dl – the lengths of the points offset vector of the test sample in relation to their position recognized as a faultless were proposed. From the scope of the uncertainty of estimation of the area of registry parcels the impact of the errors of the geodetic network points was determined (points of reference and of the higher class networks) and the effect of the correlation between the coordinates of the same point on the accuracy of the determined plot area. The scope of the correction was determined (in EGiB database) of the plots area, calculated on the basis of re-measurements, performed using equivalent techniques (in terms of accuracy). The analysis of the risk of damage to the underground infrastructure network due to the low quality of spatial data is another research topic presented in the paper. Three main factors have been identified that influence the value of this risk: incompleteness of spatial data sets and insufficient accuracy of determination of the horizontal and vertical position of underground infrastructure. A method for estimation of the project risk has been developed (quantitative and qualitative) and the author’s risk estimation technique, based on the idea of fuzzy logic was proposed. Maps (2D and 3D) of the risk of damage to the underground infrastructure network were developed in the form of large-scale thematic maps, presenting the design risk in qualitative and quantitative form. The data quality model is a set of rules used to describe the quality of these data sets. The model that has been proposed defines a standardized approach for assessing and reporting the quality of EGiB, GESUT and BDOT500 spatial data bases. Quantitative and qualitative rules (automatic, office and field) of data sets control were defined. The minimum sample size and the number of eligible nonconformities in random samples were determined. The data quality elements were described using the following descriptors: range, measure, result, and type and unit of value. Data quality studies were performed according to the users needs. The values of impact weights were determined by the hierarchical analytical process method (AHP). The harmonization of conceptual models of EGiB, GESUT and BDOT500 databases with BDOT10k database was analysed too. It was found that the downloading and supplying of the information in BDOT10k creation and update processes from the analyzed registers are limited. An effective approach to providing spatial data sets users with information concerning data uncertainty are cartographic visualization techniques. Based on the author’s own experience and research works on the quality of official spatial database data examination, the set of methods for visualization of the uncertainty of data bases EGiB, GESUT and BDOT500 was defined. This set includes visualization techniques designed to present three types of uncertainty: location, attribute values and time. Uncertainty of the position was defined (for surface, line, and point objects) using several (three to five) visual variables. Uncertainty of attribute values and time uncertainty, describing (for example) completeness or timeliness of sets, are presented by means of three graphical variables. The research problems presented in the paper are of cognitive and application importance. They indicate on the possibility of effective evaluation of the quality of spatial data collected in public registers and may be an important element of the expert system.

The aim of the paper was to determine the influence of root systems of chosen tree species found in the Polish Flysch Carpathians on the increase of soil shear strength (root cohesion) in terms of slope stability. The paper's goal was achieved through comprehensive tests on root systems of eight relatively common in the Polish Flysch Carpathians tree species. The tests that were carried out included field work, laboratory work and analytical calculations. As part of the field work, the root area ratio (A IA) of the roots was determined using the method of profiling the walls of the trench at a distance of about 1.0 m from the tree trunk. The width of the. trenches was about 1.0 m, and their depth depended on the ground conditions and ranged from 0.6 to 1.0 m below the ground level. After preparing the walls of the trench, the profile was divided into vertical layers with a height of 0.1 m, within which root diameters were measured. Roots with diameters from 1 to 10 mm were taken into consideration in root area ratio calculations in accordance with the generally accepted methodology for this type of tests. These measurements were made in Biegnik (silver fir), Ropica Polska (silver birch, black locust) and Szymbark (silver birch, European beech, European hornbeam, silver fir, sycamore maple, Scots pine, European spruce) located near Gorlice (The Low Beskids) in areas with unplanned forest management. In case of each tested tree species the samples of roots were taken, transported to the laboratory and then saturated with water for at least one day. Before testing the samples were obtained from the water and stretched in a. tensile testing machine in order to determine their tensile strength and flexibility. In general, over 2200 root samples were tested. The results of tests on root area ratio of root systems and their tensile strength were used to determine the value of increase in shear strength of the soils, called root cohesion. To this purpose a classic Wu-Waldron calculation model was used as well as two types of bundle models, the so called static model (Fiber Bundle Model — FIRM, FBM2, FBM3) and the deformation model (Root Bundle Model— RBM1, RBM2, mRBM1) that differ in terms of the assumptions concerning the way the tensile force is distributed to the roots as well as the range of parameters taken into account during calculations. The stability analysis of 8 landslides in forest areas of Cicikowicleie and Wignickie Foothills was a form of verification of relevance of the obtained calculation results. The results of tests on root area ratio in the profile showed that, as expected, the number of roots in the soil profile and their ApIA values are very variable. It was shown that the values of the root area ratio of the tested tree species with a diameter 1-10 ram are a maximum of 0.8% close to the surface of the ground and they decrease along with the depth reaching the values at least one order of magnitude lower than close to the surface at the depth 0.5-1.0 m below the ground level. Average values of the root area ratio within the soil profile were from 0.05 to 0.13% adequately for Scots pine and European beech. The measured values of the root area ratio are relatively low in relation to the values of this parameter given in literature, which is probably connected with great cohesiveness of the soils and the fact that there were a lot of rock fragments in the soil, where the tests were carried out. Calculation results of the Gale-Grigal function indicate that a distribution of roots in the soil profile is similar for the tested species, apart from the silver fir from Bie§nik and European hornbeam. Considering the number of roots, their distribution in the soil profile and the root area ratio it appears that — considering slope stability — the root systems of European beech and black locust are the most optimal, which coincides with tests results given in literature. The results of tensile strength tests showed that the roots of the tested tree species have different tensile strength. The roots of European beech and European hornbeam had high tensile strength, whereas the roots of conifers and silver birch in deciduous trees — low. The analysis of test results also showed that the roots of the studied tree species are characterized by high variability of mechanical properties. The values Of shear strength increase are mainly related to the number and size (diameter) of the roots in the soil profile as well as their tensile strength and pullout resistance, although they can also result from the used calculation method (calculation model). The tests showed that the distribution of roots in the soil and their tensile strength are characterized by large variability, which allows the conclusion that using typical geotechnical calculations, which take into consideration the role of root systems is exposed to a high risk of overestimating their influence on the soil reinforcement. hence, while determining or assuming the increase in shear strength of soil reinforced with roots (root cohesion) for design calculations, a conservative (careful) approach that includes the most unfavourable values of this parameter should be used. Tests showed that the values of shear strength increase of the soil reinforced with roots calculated using Wu-Waldron model in extreme cases are three times higher than the values calculated using bundle models. In general, the most conservative calculation results of the shear strength increase were obtained using deformation bundle models: RBM2 (RBMw) or mRBM1. RBM2 model considers the variability of strength characteristics of soils described by Weibull survival function and in most cases gives the lowest values of the shear strength increase, which usually constitute 50% of the values of shear strength increase determined using classic Wu-Waldron model. Whereas the second model (mRBM1.) considers averaged values of roots strength parameters as well as the possibility that two main mechanism of destruction of a root bundle - rupture and pulling out - can occur at the same. time. The values of shear strength increase calculated using this model were the lowest in case of beech and hornbeam roots, which had high tensile strength. It indicates that in the surface part of the profile (down to 0.2 m below the ground level), primarily in case of deciduous trees, the main mechanism of failure of the root bundle will be pulling out. However, this model requires the knowledge of a much greater number of geometrical parameters of roots and geotechnical parameters of soil, and additionally it is very sensitive to input data. Therefore, it seems practical to use the RBM2 model to assess the influence of roots on the soil shear strength increase, and in order to obtain safe results of calculations in the surface part of the profile, the Weibull shape coefficient equal to 1.0 can be assumed. On the other hand, the Wu-Waldron model can be used for the initial assessment of the shear strength increase of soil reinforced with roots in the situation, where the deformation properties of the root system and its interaction with the soil are not considered, although the values of the shear strength increase calculated using this model should be corrected and reduced by half. Test results indicate that in terms of slope stability the root systems of beech and hornbeam have the most favourable properties - their maximum effect of soil reinforcement in the profile to the depth of 0.5 m does not usually exceed 30 kPa, and to the depth of 1 m - 20 kPa. The root systems of conifers have the least impact on the slope reinforcement, usually increasing the soil shear strength by less than 5 kPa. These values coincide to a large extent with the range of shear strength increase obtained from the direct shear test as well as results of stability analysis given in literature and carried out as part of this work. The analysis of the literature indicates that the methods of measuring tree's root systems as well as their interpretation are very different, which often limits the possibilities of comparing test results. This indicates the need to systematize this type of tests and for this purpose a root distribution model (RDM) can be used, which can be integrated with any deformation bundle model (RBM). A combination of these two calculation models allows the range of soil reinforcement around trees to be determined and this information might be used in practice, while planning bioengineering procedures in areas exposed to surface mass movements. The functionality of this solution can be increased by considering the dynamics of plant develop¬ment in the calculations. This, however, requires conducting this type of research in order to obtain more data.