Дисертації з теми "Soil protein"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Soil protein".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Truong, Hung Phuc. "Fate of Cry Toxins from Bacillus thuringiensis in soil." Thesis, Montpellier, 2015. http://www.theses.fr/2015MONTS210.
Повний текст джерелаThe insecticidal properties of Bacillus thuringiensis, discovered by Shigentane Ishiwatari, have been used for decades as biopesticides and this use has been increasing rapidly because of concerns about the negative environmental effects of chemical pesticides. Currently, Bt toxin in the form of both biopesticides and Bt transgenic plantsmay supplement or replace chemical pesticide. There is little evidence to demonstrate that Bt toxin has any harmful effect to the environment or to human health. Nevertheless, there are concerns that commercial transgenic crops may have harmful impacts on the environment. After release into soil via root exudation and breakdown of plant residues, Bt toxin interacts with soil particles. The interactions of Bt toxin with soil particles influence its mobility, its bioavailability, its persistence and its toxicity. In this study, we aim to establish the relative importance of biological and physicochemical factors in the determination of the dynamics of detectable Cry proteins in soils, to clarify if adsorbed protein maintains its insecticidal properties and to identify the soil properties that determine the fate of Cry proteins in soil. The results show that Cry proteins have strong affinity on soil surface. However, there was little relationship between affinity for soil or the extraction yield and soil properties including clay content, organic carbon content and soil pH. There was little relationship between the affinity and the extraction yield. The proteins differ in both their affinity for soil and their extraction yields.An assessment of role of soil and environmental factors in the fate of Cry protein from commercial biopesticide formulation showed a rapid decline of detectable Cry protein subjected to direct sunlight under the laboratory condition, whereas, little effect was observed under field conditions. The half-life of proteins in soil under natural conditions was about one week. Strong temperature effects were observed, but theydiffered for biopesticide and purified protein, indicating different limiting steps. For biopesticide, the observed decline was due to biological factors, possibly including sporulation. In contrast for purified proteins, increased temperature enhanced conformationalchanges of the soil-adsorbed protein, leading to fixation and hence extraction efficiency decreased that decreased with time. Moreover, the study of persistence of various Cry proteins in contrasting soils was carried out by immuno-detection and bioassay showed that extractable toxin decreased with incubation of up to four weeks. Insecticidal activity was still retained in the adsorbed state, but lost after two weeks of incubation at 25°C. The decline in extractable protein and toxicity was much lower at 4°C than 25°C. There was no significant effect of soil sterilization to persistence of Cry toxin indicating that decrease in detectable Cry toxin in soil may be time-dependent fixation of adsorbed protein as well as decreasing solubilization in larva midgut, but not microbial breakdown.Exposition to Cry in the adsorbed form could have a significant impact on target and even non target insects and should be investigation to determine the potential impact
Delin, Sofia. "Site-specific nitrogen fertilization demand in relation to plant available soil nitrogen and water : potential for prediction based on soil characteristics /." Skara : Department of Soil Sciences, Swedish University of Agricultural Sciences, 2005. http://epsilon.slu.se/200506.pdf.
Повний текст джерелаMariani, Pilar Drummond Sampaio Correa. "Estudo da biodegradação da blenda poli (epsilon-caprolactona) / amido modificado/proteina isolada de soja em diferentes solos : caracterização dos produtos formados e avaliação da toxicidade." [s.n.], 2010. http://repositorio.unicamp.br/jspui/handle/REPOSIP/267086.
Повний текст джерелаTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Quimica
Made available in DSpace on 2018-08-15T18:48:38Z (GMT). No. of bitstreams: 1 Mariani_PilarDrummondSampaioCorrea_D.pdf: 18147924 bytes, checksum: 325f49ef8840be70ed59254449097128 (MD5) Previous issue date: 2010
Resumo: O desenvolvimento de polímeros biodegradáveis tem como objetivo contribuir com a redução do volume de lixo plástico descartado no meio ambiente. Em vista disso, a utilização de polímeros naturais na confecção de blendas tem proporcionado o aproveitamento de recursos de fontes renováveis como e o caso do amido e da soja. Nesse trabalho, dando continuidade as pesquisas realizadas anteriormente no grupo de materiais biodegradáveis da Profa. Lucia H. Innocentini-Mei (FEQ/UNICAMP),foram utilizadas blendas a base de poli (e-caprolactona), amido de milho modificado, proteína isolada de soja (PIS) e sorbitol. As blendas foram preparadas através de extrusão em extrusora mono-rosca e prensagem a quente e as amostras assim obtidas foram submetidas a caracterização e estudo da biodegradação em diferentes solos, com o apoio do Laboratório de Microbiologia do solo da ESALQ/USP, sob a supervisão da Profa. Elke J.B. Cardoso. A caracterização dos materiais obtidos deu enfoque as propriedades térmicas, mecânicas, morfológicas e capacidade de biodegradação em solos de diferentes texturas, e com ou sem a adição de N-fertilizante. Observou-se que a incorporação de amido modificado e proteína isolada de soja foram responsáveis pela redução das propriedades térmicas e mecânicas dos materiais, mas, para muitas aplicações estas propriedades não são requisitos indispensáveis. Com relação à proteína isolada de soja, esta proporcionou a redução da relação carbono/nitrogênio (C/N) da blenda como esperado, atributo que foi decisivo durante o processo de biodegradacao das formulacoes em diferentes solos. A mineralizacao das formulações foi maior em solo de textura arenosa, com maior conversão de carbono a dióxido de carbono (CO2); por outro lado, o solo de textura argilosa não apresentou taxas altas de conversão de carbono a dióxido de carbono para as blendas, mas foi mais eficiente na formação de biomassa microbiana, comparado ao solo arenoso.
Abstract: The development of biodegradable polymers came to reduce the volume of plastic waste discarded in the environment. As a result, the use of natural polymers in the manufacture of blends has provided the use of renewable resources such as starch and soy. In this work, continuing the research done previously in the biodegradable materials group of School of Chemical Engineering School at State University of Campinas/ Brazil, supervised by Prof. Lucia H. Innocentini-Mei, blends of poly (e-caprolactone)/modified starch, soy protein isolate (SPI) and sorbitol were prepared by extrusion in single-screw extruder and hot pressing machine. The samples obtained were subjected to characterization and study of biodegradation in different soils, with the support of the Laboratory of Soil Microbiology (ESALQ/USP), under the supervision of Professor Elke J. B. N. Cardoso. The characterization of the material has focused on thermal, mechanical and morphological properties, and also on the biodegradation capacity in soils of different textures, and with or without the addition of N-fertilizer. It was observed that the incorporation of modified starch and soy protein isolate were responsible for the reduction of thermal and mechanical properties of materials but, for many applications, these properties are not necessaries. With respect to soy protein isolate (SPI), it reduced the carbon / nitrogen (C/N) of the blend as expected, an attribute which was decisive in the process of biodegradation of the studied formulations in different soils. Mineralization of the formulations was higher in sandy soil, with the higher conversion of carbon to carbon dioxide (CO2) compared to the clay soil, which did not show high rates of conversion but was more efficient in the formation of microbial biomass.
Doutorado
Ciencia e Tecnologia de Materiais
Doutor em Engenharia Química
Metho, Lewis Amollo. "Yield and quality response of four wheat cultivars to soil fertility, photoperiod and temperature." Diss., Pretoria : [s.n.], 1999. http://upetd.up.ac.za/thesis/available/etd-10092002-124728.
Повний текст джерелаGildner, Theresa. "Life History Tradeoffs Between Testosterone and Immune Function Among Shuar Forager-Horticulturalists of Amazonian Ecuador." Thesis, University of Oregon, 2018. http://hdl.handle.net/1794/23822.
Повний текст джерелаWhitaker, Justin. "Assessing Recombinant Expression of Urease Enzyme from Sporosarcina ureae as a Carbonatogenic Method for Strength Enhancement of Loose, Sandy Soils." Thesis, Université d'Ottawa / University of Ottawa, 2016. http://hdl.handle.net/10393/35228.
Повний текст джерелаSun, Hongwei. "The effect of seaweed concentrate on turfgrass growth, nematode tolerance and protein synthesis under moisture stress conditions." Diss., This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-06062008-163430/.
Повний текст джерелаKovács-Bogdán, Erika [Verfasser], and Jürgen [Akademischer Betreuer] Soll. "Characterization of protein import channel-forming proteins in chloroplasts / Erika Kovács-Bogdán. Betreuer: Jürgen Soll." München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2011. http://d-nb.info/1015170218/34.
Повний текст джерелаCastagnara, Deise Dalazen. "Produção de grãos, forragem, palhada e propriedades físicas em latossolo vermelho sob diferentes usos em sistemas de integração lavoura pecuária." Universidade Estadual do Oeste do Paraná, 2012. http://tede.unioeste.br:8080/tede/handle/tede/1479.
Повний текст джерелаUniversidade Federal do Pampa
The study was conducted to evaluate the production and characteristics of oat straw in 2009 and the performance of corn in succession submitted to the different splitting of nitrogen. Also, the production of fodder and straw, structural and nutritional characteristics of oat and soil physical properties in the succession black oat / corn / oats / soybean / oats in the years 2009, 2010 and 2011. We adopted six land uses distributed in bands (P10 and P20: grazing height of the residue of 10 and 20 cm, C10 and C20: Cutting hay with height of the residue of 10 and 20 cm, SC w / SD - no grazing or cuts for tillage; SC w / PC - without grazing or cutting for conventional tillage) and three times in the design of randomized blocks. In the years 2009, 2010 and 2011 were performed respectively 3, 1 and 2 cuts or grazing oats. In 2009/2010 crop was sown corn crop and the harvest 2010/2011 soybean crop. Evaluations to determine production of straw were taken after grazing or cutting and drying prior to deployment to areas of summer crops. In maize were evaluated biometric characteristics, yield components and productivity. Sampling for determination of dry matter production, structural and nutritional characteristics of forage were taken at each cutting or grazing. The samples for the determination of physical characteristics of soil macroporosity, microporosity, total porosity and bulk density were made in layers 0 to 0.10 and 0.10-0.20 m at the end of each cycle of cultivation of oats or of summer crops. The completion of cutting or grazing reduces the deposition of straw by oats. Large quantities of straw oats reduce the productivity of corn. Different splitting of nitrogen do not affect the grain yield in oats. Better quality forage and better distributed throughout the autumn-winter period is achieved with the completion of cutting or grazing. In Oxisol, conventional tillage reduces density and increases microporosity and macroporosity and total porosity, while the cultivation of oats in the fall and winter harvest forage by cutting or grazing residual height of 10 cm or 20 does not alter the physical properties of soil
O estudo foi conduzido com o objetivo de avaliar a produção e características da palhada de aveia branca e o desempenho da cultura do milho em sucessão submetida à diferentes parcelamentos da adubação nitrogenada. Estudou-se também, a produção de forragem e palhada, características estruturais e nutritivas da aveia branca e as características físicas do solo na sucessão aveia/milho/aveia/soja/aveia nos anos de 2009; 2010 e 2011. Foram adotados seis usos do solo distribuídos em faixas (pastejo com altura do resíduo de 10 e 20 cm; corte para fenação com altura do resíduo de 10 e 20 cm; sem pastejos ou cortes para semeadura direta e sem pastejos ou cortes para preparo convencional) com três repetições sob o delineamento de blocos ao acaso. Nos anos de 2009; 2010 e 2011 foram realizados respectivamente 3; 1 e 2 cortes ou pastejos na aveia. Na safra 2009/2010 foi semeada a cultura do milho e na safra 2010/2011 a cultura da soja. Na aveia avaliou-se a produção, características estruturais e nutritivas da forragem antes de cada pastejo ou corte, e a produção e composição da palhada residual após cada pastejo ou corte e antes da semeadura das culturas de verão. Na cultura do milho foram avaliadas as características biométricas, os componentes de produção e produtividade. No solo estudou-se as características físicas de macroporosidade, microporosidade, porosidade total e densidade do solo por meio de amostragens realizadas nas camadas de 0 0,10 e 0,10-0,20 m ao final de cada ciclo de cultivo da aveia ou das culturas de verão. A realização de cortes ou pastejos reduziu a deposição de palhada residual pela aveia. Grandes quantidades de palhada residual de aveia reduziram a produtividade da cultura do milho. Diferentes parcelamentos da adubação nitrogenada não interferiram na produtividade do milho em sucessão à aveia. Forragem de melhor qualidade e melhor distribuída ao longo do período do outono-inverno foi obtida com a realização de cortes ou pastejos. Em Latossolo Vermelho, o preparo convencional reduziu a densidade e a microporosidade e aumentou a macroporosidade e a porosidade total, enquanto o cultivo de aveia no outono inverno e colheita da foragem por corte ou pastejo com altura residual de 10 ou 20 cm não alterou as propriedades físicas do solo
Avila, Luciana Aparecida. "Efeitos do algodão Bt (Bollgard evento 531) na comunidade bacteriana da rizosfera." Universidade de São Paulo, 2008. http://www.teses.usp.br/teses/disponiveis/87/87131/tde-12012009-114036/.
Повний текст джерелаThe transgenic cotton Bollgard® (Bt cotton) contains the cry1Ac gene from the Bacillus thuringiensis bacterium, which confers the plant resistance against some insects. The expression of this gene in the plant can cause adverse ecological effects on soil and rhizosphere microbiota. In a greenhouse experiment, the bacterial community associate to Bt cotton was compared to non-transgenic parental cultivar plants, in two types of soil at different plant development stages. Rhizosphere communities were evaluated by culture-dependent and independent approaches. Results reveal the effect of the Bt cotton in the density and diversity of Pseudomonas and total bacteria, during initial plant development stages. The Cry toxin was detected in the rhizosphere of Bt cotton, during all plant cycle. In the phases of flower formation and fruit opening, the microbial activity was greater in the rhizosphere of Bt cotton. These results show the potential of the rhizosphere to reestablish the original structure of the bacterial community after a temporary impact.
Silva, Franciléia de Oliveira e. "Espacialização dos teores de proteína e óleo de soja e milho e sua correlação com os atributos do solo e produtividade." Universidade Estadual do Oeste do Paraná, 2016. http://tede.unioeste.br/handle/tede/3041.
Повний текст джерелаMade available in DSpace on 2017-09-06T19:04:36Z (GMT). No. of bitstreams: 1 Franciléia_Silva2016.pdf: 2149526 bytes, checksum: ea47360bf858aa139e83502eba59b4e3 (MD5) Previous issue date: 2016-07-15
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES
The importance of Brazil's agricultural activity boosts for researches that can be developed with different focuses such as the influence of soil properties on crops and spatial analysis of soil, in order to achieve a better management, with less environmental impact and increase crop yield as soybeans and maize. Besides yield, studies involving parameters such as quality are essential, since raw materials are seen as a possibility to be used in industry. Thus, this trial aimed at carrying out spatial analysis of quality parameters for soybean and maize (protein and oil content). The index of spatial dependence was calculated, while thematic maps were drawn. Further, analysis of spatial correlation among these parameters and attributes of soil was carried out as well as physical (soil penetration resistance) and chemical of soil (P, K, Ca, Mg, Cu, Fe, Mn, Zn MO, Al, pH, H+Al, SB, SMP e Sat. Al, texture (sand, silt and clay), altitude and yield were also recorded. This trial was carried out in two areas (A and B) cropped with soybeans (summer crop) and maize (winter maize) under no-tillage system. Among the studied attributes, K content was significantly correlated (positively) with soybean protein in both experimental areas (A and B) as well as in both studied agricultural years (2012/2013 and 2013/2014.). Clay and mechanical resistance to penetration at 20-30 cm depth showed negative correlation with soybean protein in area B in both agricultural years. Soybean protein and its oil were inversely correlated in both experimental areas: area A (2013/14) and area B in both years (2012/13 and 2013/14). The corn protein showed no spatial dependence. But the oil content presented moderate spatial dependence and showed an inverse correlation with productivity in both areas under study.
A importância da atividade agrícola do Brasil faz com que pesquisas sejam desenvolvidas com focos distintos como a influência dos atributos do solo nas culturas e análise espacial do solo, a fim de se realizar um manejo mais adequado, com menor impacto ambiental e aumentar a produtividade das culturas, dentre elas a soja e o milho. Além da produtividade, verifica-se a importância de estudos que envolvam parâmetros como a qualidade, tendo em vista a possibilidade de utilização da matéria prima para a indústria. Assim, o presente trabalho teve como objetivo realizar uma análise espacial dos parâmetros de qualidade (proteína e teor de óleo) de soja e milho. Calculou-se o índice de dependência espacial e elaboraram-se mapas temáticos. Buscou-se ainda realizar a análise de correlação espacial entre estes parâmetros e atributos físicos (resistência do solo à penetração) e químicos do solo (P, K, Ca, Mg, Cu, Fe, Mn, Zn MO, Al, pH, H+Al, SB, SMP e Sat. Al), textura (areia, silte e argila), altitude e com a produtividade. O experimento foi conduzido em duas áreas cultivadas (A e B) com soja (safra de verão) e milho (safrinha) sob sistema de plantio direto. Dentre os atributos estudados, o teor de K correlacionou de forma significativa (positiva) com a proteína de soja, nas duas áreas experimentais (A e B) e nos dois anos agrícolas estudados (2012/2013 e 2013/2014.). A argila e a resistência mecânica à penetração na profundidade (20-30 cm) apresentaram correlação negativa com a proteína de soja na área B nos dois anos agrícolas. A proteína de soja e o óleo de soja correlacionaram-se inversamente nas duas áreas experimentais: área A (2013/14) e na área B nos dois anos (2012/13 e 2013/14). Já o teor de proteína de milho não demonstrou dependência espacial. Já o teor de óleo apresentou dependência espacial moderada e apresentou correlação inversa com a produtividade nas duas áreas em estudo.
Gruber, Helga [Verfasser], Martin Akademischer Betreuer] Müller, Heinrich H. D. [Akademischer Betreuer] [Meyer, and Karl [Akademischer Betreuer] Kramer. "Surveillance of Cry1Ab protein and cry1Ab DNA in liquid manure, soil and agricultural crops under Bt-maize cropping and slurry management of cows fed Bt-maize (MON810) / Helga Gruber. Gutachter: Karl Kramer. Betreuer: Martin Müller ; Heinrich H. D. Meyer." München : Universitätsbibliothek der TU München, 2011. http://d-nb.info/1019590017/34.
Повний текст джерелаMa, Li. "Soil Organic Nitrogen - Investigation of Soil Amino Acids and Proteinaceous Compounds." Diss., Virginia Tech, 2015. http://hdl.handle.net/10919/51960.
Повний текст джерелаPh. D.
CATALDI, MARIA GRAZIA PIA. "Improvement of nitrogen and phosphorus use efficiency in wheat by application of Plant Growth Promoting Bacteria as bio-fertilizers." Doctoral thesis, Università degli Studi di Foggia, 2019. http://hdl.handle.net/11369/382360.
Повний текст джерелаDue to the increase in human population growth, the depletion of natural resources and the environmental pollution, it is necessary to raise agricultural productivity without enhancing environmental footprint. A sustainable intensification may offer the opportunity of increasing input efficiency by reducing fertilizer applications and agricultural greenhouse gas (GHGs) emissions. The issue of sustainability of crop production is even more acute in semi-arid and arid regions, such as Mediterranean arable lands, where drought and related biophysical factors create a fragile and unstable environment. In Mediterranean Basin, wheat is one of the most widely grown crop; in particular, durum wheat represents the main grain crop in terms of surface area and provides food security to a large population share. The use of Plant Growth Promoting Bacteria (PGPB) as inoculants in agricultural soils might be a suitable technology for sustainable farming systems in accordance with the reduction of environmental pollution and the need to use nitrogen (N) and phosphorus (P) resources more efficiently. Autochthonous microorganisms naturally possess some mechanisms of “adaptive evolution” to win and overcome the stressful environmental conditions and are able to enhance plant growth and protect plants from diseases and abiotic stresses. Within this context, firstly, a review on PGPB application in cereals for a sustainable intensification was carried out focusing on the interaction PGPB-wheat (see Chapter 2). In particular, the main topic of this review was the potential of autochthonous PGPB isolated from soils to enhance nutrient use efficiency. As few data are available on the interaction plant-PGPB isolated from durum wheat rhizosphere, the aim of this PhD thesis was focused on the selection of PGPB from durum wheat rhizosphere and on the evaluation of their effect on N and P nutrition in wheat. To achieve this aim, the following goals were pursued: i) the phenotypic and genotypic characterization of autochthonous non-pathogenic PGPB from durum wheat rhizosphere to select in vitro the most promising strains able to improve nutrient use efficiency; ii) the evaluation of the effect of the PGPB selected as the best nitrifying bacteria on durum wheat N use efficiency; iii) the evaluation of the effect on wheat seedlings growth of PGPB with P-solubilizing and P-mineralizing combined capability. In order to achieve the first goal, four-hundred seventy-four bacteria (mesophiles, spore-formers, pseudomonads, actinobacteria) were isolated from rhizosphere of durum wheat. The isolates were preliminary characterized for phosphate solubilization, NH4+ production, nitrification and siderophores production; then, some quantitative analyses were carried out (production of IAA-indole acetic acid, NO2 -/NO3 - and P-mineralization) and used as input to select some promising isolates through a new approach based on median and quartiles. As a result, sixteen strains were selected and identified by 16S sequencing. The promising bacteria were tested as inoculants in wheat seedlings for a preliminary validation in soil. Among them, three strains (25A- Bacillus, 6P- Stenotrophomonas, and 20P- Stenotrophomonas) showed the best performances in terms of plant biomass and height and were selected to evaluate their effect on wheat nutrient use efficiency (see Chapter 3). A first experiment in a growth chamber (see Chapter 4) was carried out to evaluate the effect of PGPB application on durum wheat N use efficiency, by using the best nitrifying isolates (6PStenotrophomonas and 20P- Stenotrophomonas) which were also able to produce NH4 +. To this aim, two genotypes (Saragolla and Simeto) were grown under controlled conditions to evaluate the capacity of the isolates to establish and survive in rhizosphere and their effect on N-uptake (UPE) and use efficiency (NUEP). In Saragolla both strains improved UPE and NUPE; on the contrary, in Simeto only 20P strain showed a positive effect. A further pot experiment (see Chapter 5) was carried out to investigate the capacity of the best P- solubilizing and P- mineralizing isolates (12A- Bacillus and 25A- Bacillus) to promote the growth of wheat seedlings in low P soil. To this aim, durum and bread wheat plants were grown in low P soil to evaluate: i) the effect of bacterial isolates on root system architecture; ii) the expression of key genes involved in the P starvation response and Pi uptake, IPS1 and TaPT6 transporter. The IPS1 gene is highly responsive to P deficiency, and its transcript level is a good marker for P deficiency responses and has been shown to be involved in P homeostasis. PT6 is a high- affinity Pi transporter gene playing a dual role in Pi uptake from the soil and Pi translocation inside the plant. One isolate, 12A- Bacillus, significantly increased root length, surface area and biomass. These results might be explained by the capacity of 12A strain to produce indole-3-acetic acid (IAA) in addition to the P mineralizing and P solubilizing capability. Furthermore, an enhanced shoot dry weight and shoot P content was reported maybe because of combined capacity to increase root length and surface and to mineralize and solubilize P. Further experiments under field conditions and under different environments will be necessary to validate the effect of the selected strains on wheat nutrient use efficiency.
Barreau, Stephanie. "Biosensing with sol-gel-immobilised proteins." Thesis, Loughborough University, 1999. https://dspace.lboro.ac.uk/2134/27275.
Повний текст джерелаOliveira, Fábio Denari de. "Mapeamento dos teores de óleo e proteína de grãos de soja e análise de sua correlação com atributos do solo." Universidade de São Paulo, 2003. http://www.teses.usp.br/teses/disponiveis/11/11148/tde-09022004-160743/.
Повний текст джерелаThe purpose of the present study was to determine the spatial variability of oil and protein contents in soybean grains and to correlate these characteristics with soil attributes. In a 9.01ha field, 170 samples were taken at the nodes of a 25m regular grid. Within a 1-m radius around the georeferenced node, all soybean grains were collected, as well as 7 soil subsamples, constituting one compound sample. One of the most important and delicate aspects of Precision Agriculture is correlating data to explain the spatial yield variability of agricultural crops. There are several attributes that can influence oil (percentage of ethereal extract in dry matter %E.E.D.M.) and protein (percentage of gross protein in dry matter %G.P.D.M.) amounts in soybean grains, such as, those related to the soil (compaction, structure, nutrients, texture, moisture), plants (nutrients absorbed, rooting, water availability in the leaves, pest attacks) and climate (solar radiation, wind, temperature and humidity). Considering the attributes studied, poor correlation was verified between the spatial variability of soil fertility and texture with oil (percentage of ethereal extract in dry matter %E.E.D.M.) and protein (percentage of gross protein in dry matter %G.P.D.M.) amounts in soybean grains from the experimental area. A low coefficient of determination for the multiple linear regression analysis was obtained for the attributes oil and protein contents. Using geostatistical analysis, no spatial dependence was verified for the variables oil (ethereal extract in dry matter %E.E.D.M.), protein (gross protein in dry matter %G.P.D.M.), clay and boron amounts. The soil attributes (silt, H+Al, D.M., Ca, Mg, K, SB, CEC, V%, Mn and Cu) showed excellent coefficients of determination in the experimental area, with all coefficients above 85%, except for K, which showed coefficients between 75% and 85%, which are considered good.
Lee, Kyoungmi. "DEVELOPMENT OF PROTEIN-IMPRINTED POLYSILOXANE BIOMATERIALS: PROTEIN SELECTIVITY AND CELLULAR RESPONSES." Lexington, Ky. : [University of Kentucky Libraries], 2005. http://lib.uky.edu/ETD/ukybien2005t00373/Thesis.pdf.
Повний текст джерелаTitle from document title page (viewed on January 19, 2006). Document formatted into pages; contains: viii, 59 p. : ill. (some col.). Includes abstract and vita. Includes bibliographical references (p. 53-58).
Power, Rowena Suzanne. "The application of a transgenic strain of the nematode Caenorhabditis elegans to the biomonitoring of metal polluted soil." Thesis, University of Nottingham, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.310841.
Повний текст джерелаMaja, Đanić. "Uticaj soli žučnih kiselina na prodor i metabolizam simvastatina u probiotskim bakterijama." Phd thesis, Univerzitet u Novom Sadu, Medicinski fakultet u Novom Sadu, 2016. http://www.cris.uns.ac.rs/record.jsf?recordId=101272&source=NDLTD&language=en.
Повний текст джерелаInterindividual differences in the composition and activity of the gut microflora may affect the metabolism of drugs as well as their final therapeutic response. Simvastatin is drug from the group of statins and has extremely low water solubility, low bioavailability (<5%) and high interindividual differences in therapeutic response whose causes are not fully understood. In recent years, great attention has been paid to studies of bile acids in the development of new pharmaceutical formulations because of their role in the drug solubilization and modification of drug transport through biological membranes. Accordingly, interactions between simvastatin, probiotic bacteria and bile acids were the focus of our research due to great importance and potential influence on the pharmacokinetic and pharmacodynamic properties of simvastatin, and therefore the final therapeutic response in the patients. The aim of the study was to investigate the simvastatin transport and metabolism in probiotic bacteria as well as the effect of various bile acids on drug transport into the bacterial cell. Additonally, the aim was to investigate the influence of bile salts on the distribution coefficient of simvastatin, and the interactions of bile acids with simvastatin at the level of probiotic transport proteins in order to elucidate the nature of expected interactions. Identification and quantification of samples were performed with liquid chromatography-tandem mass spectrometry (LC-MS/MS). Molecular descriptors that describe the physico-chemical and pharmacokinetic properties of identified metabolites were calculated using the software packages VolSurf+ and Molinspiration. Determination of the distribution coefficient was performed using Shake-flask method. Interaction of bile acids with simvastatin at the level of bacterial transport proteins were studied using docking studies with SwissDock program. During the twenty-four hours of incubation with probiotic bacteria, simvastatin concentrations in the extracellular contet showed a statistically significant decrease. The total amount of simvastatin, as the sum of the extracellular and intracellular amount, during the whole study period, was significantly lower in comparison with control group without probiotics, suggesting that the part of simvastatin was metabolized by the enzymatic activity of studied bacteria. Accordingly, eight metabolic products of simvastatin were detected and identified. Based on the calculated values of molecular descriptors, it is expected that the metabolite M-452, which is the hydroxylated product of simvastatin acid, will show the best results in terms of physico-chemical properties and bioavailability in biological system. Bile acids did not show a significant influence on simvastatin transport into probiotic bacteria. However, in some time points, slightly higher drug concentrations in the extracellular medium in groups with bile acids were observed. These differences can be partly explained by the results of the determination of the distribution coefficients which showed that investigated bile acids lead to a statistically significant decrease in simvastatin distribution coefficient due to increased solubility in the aqueous phase. The results of docking studies estimated that studied bile acids have stronger affinities for the 80% of bacterial multidrug transporters compared to simvastatin indicating the possibility of achieving the interactions of bile acids with simvastatin at the level of transport proteins of probiotic bacteria. Based on the obtained results it could be concluded that probiotic bacteria have great influence on the fate of simvastatin in a biological system. Taking into account the fact that probiotic bacteria are the normal part of gut microflora and that each individual has specific bacterial fingerprint, more attention should be paid on studying its influence on drug pharmakocinetics. Further in vivo studies are required in order to determine potential pharmacological activity of identified simvastatin metabolites. Increased water solubility of simvastatin with bile acids may open the possibility for further investigations with the aim of development of new pharmaceutical formulation with improved bioavailability and pharmacokinetic properties.
Lusley, Pauline. "Compréhension des mécanismes directs et indirects de résistance à la pourriture racinaire du pois causée par Aphanomyces euteiches : influence du choix variétal et de la cohorte microbienne associée. Compared analysis of architectural symptoms and disease severity caused by Aphanomyces euteiches between winter and spring peas. Co-existence of Rhizobia and non-rhizobial bacteria in the nodules of Pisum sativum L. depending on cultivars and influencing mycelium growth of Aphanomyces euteiches. The microbial cavalry: how crop could be determinant to beneficially shape soil microbiome in the battlefield against Aphanomyces euteiches." Thesis, Normandie, 2020. http://www.theses.fr/2020NORMR091.
Повний текст джерелаPea, well-adapted to the Normandy pedoclimatic context, represents an important nutritional source of plant proteins. At present, protein crops are among the promoting crops in view of their many agronomical, economic, and environmental interests. Despite their multiple advantages, the cultivation of protein peas is not as successful, mainly due to strong attacks by various phytopathology. The most damaging is pea root rot caused by Aphanomyces euteiches leading to a significant drop in yield and thus can penalize farmers. As there is no effective treatment to date, numerous focus researches are in progress to develop efficient control methods, which requires a holistic understanding of the pathobiome. In this thesis, studies were focused on the understanding of some direct and indirect resistance mechanisms of pea root rot caused by A. euteiches. The contribution of biotic factors in this disease were studied, specifically the influence of varietal genotype and its associated phytobiome, and so the establishment of multiple interactions with microorganisms. The comparative analysis of disease severity and induced architectural modifications, showed a differential expression according to their affiliation to winter or spring group. The two winter pea cultivars characterized by a high cold tolerance presented two features of interest: a delayed impact on aerial part despite significant root damage and an increased growth of root system in response to infection. In addition, the study of intra-nodule bacterial diversity in these same cultivars showed that the diversity of their nodule microbiome varies according to varietal genotype. This study highlighted the strong biocontrol potential of intra-nodule bacterial endophytes, with a higher relative abundance of known antagonistic bacterial genera towards A. euteiches for two winter pea cultivars. The varietal genotype therefore constitutes a direct and indirect lever by the establishment of interactions with beneficial microorganisms, to fight against pea root rot. The last research line has demonstrated the strong influence of plant cultivated species on the microbial associations in the rhizosphere, specifically a modulation of the assemblage of beneficial populations. Shaping the microbial community composition though the cultivation of crops to the benefit of the next crop represents an additional argument in favor of crop rotation use as a lever against phytopathology. Several interesting alternatives were highlighted in this research work to effectively and efficiently manage A. euteiches: at the cultivar scale, by specific characteristics in relation to varieties’ genotype and their ability to select protective endophytes, and at the scale of crop rotation, by shaping microbiome in favor of pea. Great research perspectives are emerging, especially the efficiency of protection resulting from all potential isolated biocontrol agents, which would allow the development and implementation of beneficial consortia adapted to Normandy soils and to pea cultivars specificities
Landzela, Besule. "Effects of BT Maize (MON810) crop and its residues on selected soil biological properties and N and P release in a sandy loam soil from Alice, Eastern Cape, South Africa." Thesis, University of Fort Hare, 2013. http://hdl.handle.net/10353/d1007542.
Повний текст джерелаKraus, Sabrina Maria [Verfasser], and Jürgen [Akademischer Betreuer] Soll. "Die PRAT2-Proteine der Chloroplasten / Sabrina Maria Kraus. Betreuer: Jürgen Soll." München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2011. http://d-nb.info/101768829X/34.
Повний текст джерелаSampaio, David Vieira. "Caracterização elétrica e dielétrica de cerâmicas de BaTiO3 e Ba0,77Ca0,23TiO3 sintetizadas pelo método sol gel proteico." Universidade Federal de Sergipe, 2012. https://ri.ufs.br/handle/riufs/5349.
Повний текст джерелаBarium Titanate (BaTiO3 BT) based Ceramic materials have a wide industrial application as Multilayer Ceramic Capacitors (MLCCs) mainly due to its high dielectric constant and good capacitance stability with the temperature change, however this material also presents some limitations, for example, oxidation of low cost electrodes. Several ways of BT modifications have been proposed in Literature, as example, the use of different synthesis methods and the doping with different ions. Therefore, the present work had as objectives the synthesis, sintering and electrical characterization of the BaTiO3 and Ba0.77Ca0.23TiO3 (Barium Calcium Titanate) ceramics. The Sol Gel Proteic method was used to powder synthesis, in this method, coconut water is employed as polymeric agent instead of the conventional alcoxide precursors. The characterization was done using the differential thermal analysis, thermogravimetry, x-ray powder diffraction, scanning electron microscopy and impedance spectroscopy techniques. Both, the calcined powders at 1100 °C and the sintered ceramics at 1350 °C presented single crystalline phase, with good microstructural homogeneity and relative density higher than 90%. The sintered ceramics presented a dielectric constant value at room temperature of 1200 (BT) and 680 (BCT), and dielectric loss of 4,8% (BT) and 1,8% (BCT). Besides, the BCT ceramics presented a Curie temperature on average 14 °C above that observed in Literature. Finally, the activation energies of the conductive process of the grain an grain boundary regions were evaluated following two distinct methods using: i) the Brick-layer model; and ii) the average relaxation frequency of each ceramic region, grain and grain boundary. The obtained values by the two methods are in accordance with them and suggest that the dominant conduction mechanism occurs by oxygen vacancy diffusion created still during the sintering process.
Materiais cerâmicos a base de titanato de bário (BaTiO3 BT Barium Titanate ) possuem uma larga aplicação industrial como Capacitores Cerâmicos Multicamadas (MLCCs Multi layers ceramic capacitors ) devido, principalmente, a sua alta constante dielétrica e boa estabilidade da capacitância com a variação da temperatura, porém esse material apresenta também algumas limitações, como por exemplo, a oxidação de eletrodos de baixo custo. Diversas modificações no BT têm sido sugeridas na literatura, como a utilização de diferentes métodos de síntese e a dopagem com diferentes íons. Dessa forma, o presente trabalho objetivou a síntese, a sinterização e a caracterização elétrica de cerâmicas de BaTiO3 e Ba0.77Ca0.23TiO3 (Titanato de Bário e Cálcio BCT Barium Calcium Titanate ). Para a síntese dos pós foi utilizado o método sol-gel proteico, neste método, a água de coco é utilizada como agente polimérico, ao invés dos alcóxidos convencionais. Para a caracterização das amostras foram utilizadas as técnicas de análise térmica diferencial, termogravimetria, difração de raios X, microscopia eletrônica de varredura e espectroscopia de impedância. Os pós calcinados a 1100°C bem como as cerâmicas sinterizadas a 1350°C e apresentaram fase cristalina única, com boa homogeneidade microestrutural e densidade relativa superior a 90%. O valor da constante dielétrica à temperatura ambiente foi de 1200 para o BT e 680 para o BCT com perda dielétrica de 4,8% e 1,8%, respectivamente. Além disso, as cerâmicas de BCT apresentaram uma temperatura de Curie em média 14 °C acima dos valores observados na Literatura. Por ultimo, as energias de ativação dos processos condutivos nas regiões de grão e de contorno de grão foram obtidas seguindo dois procedimentos distintos: i) utilizando o modelo de brick-layer; e ii) utilizando a frequência de relaxação média de cada região da cerâmica, grão e contorno de grão. Os valores obtidos pelos dois métodos concordaram entre si e sugerem que o mecanismo de condução dominante ocorre por vacâncias de O2- formadas ainda durante o processo de sinterização.
Sjuts, Inga [Verfasser], and Jürgen [Akademischer Betreuer] Soll. "Topology and function of the inner envelope protein Tic110 / Inga Sjuts ; Betreuer: Jürgen Soll." München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2018. http://d-nb.info/1159879796/34.
Повний текст джерелаRossi, Martina. "Caratteristiche qualitative delle carni di polli alimentati con proteine della soia innovative." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020.
Знайти повний текст джерелаLi, Nannan [Verfasser], and Jürgen [Akademischer Betreuer] Soll. "Characterization of two chloroplast envelope membrane proteins / Nannan Li. Betreuer: Jürgen Soll." München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2013. http://d-nb.info/1036101282/34.
Повний текст джерелаChang, Wai Ling Verfasser], and Jürgen [Akademischer Betreuer] [Soll. "Characterization of the protein import pathway in pea chloroplast / Wai Ling Chang. Betreuer: Jürgen Soll." München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2014. http://d-nb.info/1067401644/34.
Повний текст джерелаLotfollahi, Mohammad. "The effect of subsoil mineral nitrogen on grain protein concentration of wheat." Title page, table of contents and summary only, 1996. http://web4.library.adelaide.edu.au/theses/09PH/09phl882.pdf.
Повний текст джерелаAckermann, Markus [Verfasser], and Jürgen [Akademischer Betreuer] Soll. "Biogenese des Rieske-Eisen-Schwefel-Proteins der Mitochondrien / Markus Ackermann. Betreuer: Jürgen Soll." München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2012. http://d-nb.info/1027669506/34.
Повний текст джерелаKolli, Renuka [Verfasser], and Jürgen [Akademischer Betreuer] Soll. "Roles of OXA proteins in plant mitochondrial biogenesis / Renuka Kolli ; Betreuer: Jürgen Soll." München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2020. http://d-nb.info/1229350128/34.
Повний текст джерелаDias, Diego FÃlix. "SÃntese e caracterizacÃes de nanopartÃculas de FeCo/(Fe,Co)304 com acoplamento magnÃtico tipo exchange spring sintetizadas pelo mÃtodo sol-gel Proteico." Universidade Federal do CearÃ, 2015. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=16021.
Повний текст джерелаNanopartÃculas de FeCo recobertas com (Fe,Co)3O4 (Magnetita dopadas com cobalto) na estrutura casca caroÃo (Core-Shell), foram sintetizadas pela rota quÃmica conhecida como Sol-Gel Proteica. Os materiais sintetizados foram caracterizados por Termogravimetria (TG), DifraÃÃo de Raios-X (DRX), Magnetometria de Amostra Vibrante (VSM), Espectroscopia MÃssbauer, Microscopia EletrÃnica de Varredura (MEV) e Microscopia EletrÃnica de TransmissÃo (MET). Os resultados mostram que o aumento da temperatura de re-oxidaÃÃo influi diretamente no tamanho da casca (Shell) bem como o aumento da razÃo entre a magnetizaÃÃo remanente pela magnetizaÃÃo de saturaÃÃo. O efeito de Exchange Spring e Exchange Bias foram observados nas curvas de histerese. A estrutura Core-Shell foi formada de maneira nÃo homogÃnea, ou seja, nem todas as partÃculas foram recobertas pela magnetita.
FeCo Nanoparticles coated with (Fe,Co)3O4 (Magnetite doped with cobalt) were synthesized by the chemical route known as Sol-Gel Protein. The synthesized materials were characterized by thermogravimetry (TG), X-Ray Diffraction (XRD), Vibrating Sample Magnetometry (VSM), MÃssbauer spectroscopy, Scanning Electronic Miscroscopy (SEM) and Transmission Electronic Microscopy (TEM). The results show that the increase in temperature directly influences the size of the shell (Shell) and increased the ratio of remanent magnetization to the saturation magnetization. The effect of Exchange Spring and Exchange Bias were observed in the hysteresis curves. The Core-Shell structure was formed a non-homogeneous manner, ie not all the magnetite particles were coated.
DERIU, DANIELA. "Applicazione della tecnologia sol-gel: sintesi di un materiale ibrido biocompatibile e studio delle proprietà spettroscopiche ed elettrochimiche del citocromo c incapsulato in un bio sol-gel." Doctoral thesis, Università degli Studi di Roma "Tor Vergata", 2009. http://hdl.handle.net/2108/966.
Повний текст джерелаBarion, Giuseppe. "Isoflavoni e proteina in soia. Valutazione di varietà in differenti condizioni di gestione agronomica." Doctoral thesis, Università degli studi di Padova, 2008. http://hdl.handle.net/11577/3425942.
Повний текст джерелаMacmillan, Alexander Malcolm. "Bioencapsulation in silica sol-gel nano-pores and intrinsic protein fluorescence : ensemble and single molecule." Thesis, University of Strathclyde, 2009. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=25772.
Повний текст джерелаStudte, Carsten [Verfasser], and Jürgen [Akademischer Betreuer] Soll. "Characterization of the membrane protein Prat1 in the inner envelope of chloroplasts / Carsten Studte. Betreuer: Jürgen Soll." München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2012. http://d-nb.info/1027066291/34.
Повний текст джерелаLamberti, Giorgia [Verfasser], and Jürgen [Akademischer Betreuer] Soll. "Characterization of the Arabidopsis thaliana STY8, STY17 and STY46 protein kinase family / Giorgia Lamberti. Betreuer: Jürgen Soll." München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2011. http://d-nb.info/1018615954/34.
Повний текст джерелаLosso, Anja. "Caratteristiche chimico-fisiche delle proteine della soia e del latte: confronto e possibili trasformazioni industriali." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2019.
Знайти повний текст джерелаLima, Zilma Mendes de. "âNova rota de sÃntese de nanopartÃculas de NiMn2O4 usando o MÃtodo Sol-Gel ProtÃicoâ." Universidade Federal do CearÃ, 2011. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=6602.
Повний текст джерелаEsse trabalho consiste na obtenÃÃo de uma nova rota de sÃntese para o manganato de nÃquel (NiMn2O4) atravÃs do mÃtodo sol-gel protÃico, utilizando a gelatina comestÃvel como precursor orgÃnico, bem como uma caracterizaÃÃo do mesmo. A sÃntese das nanopartÃculas foi realizada atravÃs da diluiÃÃo de sais inorgÃnicos (NiCl2.6H2O, MnCl2.4H2O) e gelatina em Ãgua destilada com a adiÃÃo de hidrÃxido de sÃdio (NaOH) em soluÃÃo. Em seguida foi colocada em uma estufa com temperatura fixa de 100ÂC para que fosse seca. As amostras foram calcinadas numa faixa de temperatura de 600ÂC à 1000ÂC por um tempo prÃ-determinado. O forno utilizado na calcinaÃÃo possui um formato tubular com sistema rotativo e inclinaÃÃo ajustÃvel, cujo principal objetivo à a obtenÃÃo de uma maior homogeneizaÃÃo das partÃculas. Foi realizada uma caracterizaÃÃo microestrutural cujos parÃmetros calculados foram o tamanho e a microdeformaÃÃo das nanopartÃculas. As tÃcnicas empregadas para essa anÃlise foram: a difraÃÃo de raios-X com o uso do mÃtodo Rietveld de refinamento de estrutura; a fluorescÃncia de raios-X com o intuito de comprovar a estequiometria dos elementos presentes na sÃntese; medidas magnÃticas com o objetivo de encontrar propriedades magnÃticas do composto (NiMn2O4) e as anÃlises tÃrmicas TG e DSC para a determinaÃÃo das perdas de massa e energia de ativaÃÃo do material, durante o processo de sinterizaÃÃo. Todos os recursos e tÃcnicas aplicadas na obtenÃÃo desse composto tÃm como objetivo otimizar o processo de sua obtenÃÃo; com diminuiÃÃo de energia, tempo e custo
This work presents a new route for the synthesis of nickel manganate (NiMn2O4) through the sol-gel protein method, using gelatin as an organic precursor. The synthesis of nanoparticles was performed by dilution of inorganic salts (NiCl2.6H2O, MnCl2.4H2O) and gelatin in distilled water with the addition of sodium hydroxide (NaOH). This solution was then placed in an oven at a fixed temperature of 100ÂC to make it dry. The samples were calcined in a temperature range of 600ÂC to 1000ÂC for a predetermined time. The oven used in calcination has a tubular shape and is provided with rotation and adjustable tilt, whose main objective is to obtain a greater homogenization of the particles. Particle size and microstrain were calculated from the parameters obtained from the microstructural characterization. The technique used for this analysis ware: the X-ray diffraction using the Rietveld method of structure refinement; the technique of X-ray fluorescence was applied in order to prove the stoichiometry of the elements present in the synthesis; magnetic measurements in order to find the magnetic properties of the compound (NiMn2O4) and the thermal analysis TG and DSC were performed to determine the loss of mass and energy variation of the material during the sintering process. The technique used to obtain nickel manganate allowed the optimization of the process. Thus obtaining the desired material with lower energy consumption, shorter time and lower cost than other processes commonly employed
Soares, Felipe Mascarenhas dos Santos. "Síntese e caracterização do aluminato de estrôncio dopado via sol-gel modificado para aplicação como pigmento cerâmico." Universidade Federal de Sergipe, 2016. https://ri.ufs.br/handle/riufs/3533.
Повний текст джерелаIn the present work, Dy3+ co-doped SrAl2O4:Eu3+ was produced via proteic sol-gel method, a modified sol-gel route which allows the formation of oxides at lower temperatures than other methods. CO2 laser sintering was used as a method for heat treatment, effective in reducing trivalent europium ions in doped samples. Thermal analysis of the precursors, performed by TG and DTA, revealed that the crystallization of SrAl2O4 phase occurs at approximately 1060 °C. By X-ray diffractometry of the samples characterized before and after sintering was verified monoclinic and hexagonal phases formation. DLS technique revealed the presence of nanosized and micrometric particles, and particle agglomerates, result which was confirmed by SEM images before and after sintering. Micrographs of the fracture surface of a sintered pellet revealed a high degree of densification caused by heat treatment. Photoluminescence measurements showed that the samples after synthesis and before the heat treatment with laser have reddish emission, composed of characteristic narrow emission lines from Eu3+ and more intense emission when the samples are excited at 265 nm. The laser treatment promotes the reduction of Eu3+ to Eu2+ and this effect is confirmed by the presence of a wide emission band in the green region of the spectrum with a maximum emission obtained after excitation at 350 nm. The luminescent decay time of the thermally treated sample was approximately 100 minutes. Via XRF measurements of acquired frits, DTA and TG of the frits, of the pigment and of mixtures of both, and via applications of the mixtures on ceramic plates it was noticed good compatibility in terms of thermal processes, that indicates that the pigment have a potential to be used in ceramic floor tiles.
No presente trabalho, pós cerâmicos de SrAl2O4:Eu3+, Dy3+ foram produzidos pelo método solgel proteico, uma rota de sol-gel modificada, que permite a formação do óxido em temperaturas mais baixas comparativamente a outros métodos. A sinterização a laser de CO2 foi utilizada como método para tratamento térmico, eficiente na redução dos íons trivalentes de európio das amostras dopadas. A análise térmica dos precursores, realizada por meio de DTA e TG, revelou que a cristalização da fase SrAl2O4 acontece em aproximadamente 1060 °C. Por difratometria de raios X verificou-se a formação de fase monoclínica e hexagonal nas amostras caracterizadas antes e após a sinterização. A técnica de EDL revelou a presença de partículas nanométricas, micrométricas e aglomerados de partículas, resultado este que foi confirmado por imagens de MEV de amostras antes e após a sinterização. Micrografias da superfície de fratura de uma pastilha sinterizada a laser revelaram o alto grau de densificação possibilitado pelo tratamento térmico. Medidas de fotoluminescência revelaram que as amostras após a síntese e antes do tratamento térmico a laser apresentam emissão com coloração avermelhada, composta de picos estreitos de emissão característicos do Eu3+ e com emissão mais intensa quando as amostras são excitadas em 265 nm. O tratamento a laser promove a redução do Eu3+ para Eu2+ e este efeito é confirmado pela presença de uma banda larga de emissão na região verde do espectro, com máximo de emissão obtido após excitação em 350 nm. O tempo de decaimento luminescente da amostra tratada termicamente chegou a alcançar aproximadamente 100 minutos. Por meio de medidas de FRX de fritas adquiridas, de DTA e TG de fritas, do pigmento e de misturas entre os dois, e da aplicação das misturas em placas cerâmicas foi possível observar boa compatibilidade em termos dos processos térmicos, o que aponta para um potencial uso do pigmento em placas de revestimento cerâmico.
Lima, Hestia Raissa Batista Reis. "Síntese e caracterização do LiAlSi2O6 por novas rotas de produção." Universidade Federal de Sergipe, 2013. https://ri.ufs.br/handle/riufs/5311.
Повний текст джерелаThe spodumene (LiAlSi2O6 - LAS) is a silicate that has shown good results for high-dose dosimetry for gamma rays. This silicate may be obtained naturally or synthetically. The synthetic spodumene has been produced by solid state reaction, whose difficulty arises from the need to employ high temperatures. This paper aims to produce LAS through two different production routes: the proteic sol-gel and Pechini methods. The material produced was characterized by X-ray diffraction (XRD), differential thermal analysis (DTA) and thermogravimetry (TGA) in order to evaluate the structural properties of the material, as well as possible changes in physical or chemical properties depending on the temperature. It was found by XRD and Rietveld refinement was possible to obtain LAS B-spodumene phase by both methods. The thermal analysis showed that the material for both methods suffer considerable loss of weight in the temperature range 20-600 °C. Through thermoluminescent measures, one can observe that the LAS produced by both methods shows thermoluminescent peaks from beta irradiation at a dose of 1 Gy, thus allowing its application dosimetry. It can be concluded therefore that there is the possibility of producing them in large numbers at reduced cost and environmental impact, being viable in dosimetry. It also follows that the sol-gel protein appeared to be the best way to produce the LAS compared with other routes used, such as solid state synthesis or devitrification.
O espodumênio (LiAlSi2O6 LAS) é um silicato que tem demonstrado bons resultados para dosimetria de altas doses para raios gama. Esse silicato pode ser obtido de forma natural ou sintética. O espodumênio sintético tem sido produzido por reação do estado sólido, cuja dificuldade provém da necessidade de se empregar altas temperaturas. O presente trabalho tem o objetivo de produzir o LAS por meio de duas rotas de produção diferentes: a sol-gel proteica e método Pechini. O material produzido foi caracterizado através da difração de raios X (DRX), análises térmica diferencial (DTA) e termogravimétrica (TGA) com o intuito de avaliar as propriedades estruturais do material, bem como as possíveis mudanças de propriedades físicas ou químicas em função da temperatura. Verificou-se através da DRX e do refinamento Rietveld que foi possível se obter LAS na fase B-espodumênio por ambos os métodos. As análises térmicas mostraram que o material, por ambos os métodos, sofre perda considerável de massa no intervalo de temperatura de 20 a 600 °C. Através de medidas termoluminescentes, pode-se observar que o LAS produzido por ambos os métodos apresenta picos termoluminescentes a partir de irradiação beta com dose de 1 Gy, possibilitando sua aplicação dosimétrica. Pode-se concluir, assim, que há possibilidade de produção do LAS em larga escala a um custo e impacto ambiental reduzidos, sendo viável sua utilização em dosimetria. Também se conclui que o método sol-gel proteico se apresentou como sendo a melhor forma de produzir o LAS em comparação com outras rotas utilizadas, tais como síntese de estado sólido ou desvitrificação.
Nogueira, NÃbia Alves de Souza. "SÃntese, caracterizaÃÃo e aplicaÃÃo de nanopartÃculas de NiFe2O4 produzidas via mÃtodo sol-gel protÃico." Universidade Federal do CearÃ, 2013. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=11128.
Повний текст джерелаMagnetic nanoparticles of NiFe2O4 were synthesized by the proteic sol-gel method,using nickel (II) and iron (III) nitrates and aqueous solution of gelatin (GelitaTM). The dried solution in the form of resin, were characterized by thermogravimetric analysis(TGA), combined with the temperature-programmed oxidation (TPO). The sampleso o o oof NiFe2O4 were synthesized at different temperatures (250 C, 300 C, 400 C, 600 C,800o C e 1000oC), the annealing time interval was of 4 h; and 400oC for differentsintering times (2h, 3h e 4h). The obtained nanoparticles werecharacterized byinfrared spectroscopy, X-ray powder diffraction (XRD), transmission electronmicroscopy (TEM), scanning electron microscopy (SEM), energy dispersivespectrometer (EDS). Magnetic properties were investigated by spectroscopy MÃssbauer and Magnetization measurements obtained at room temperature;magnetization measurements was used a vibrating sample magnetometer (VSM).The microstructural parameters from the X-ray powder diffraction have beendetermined by means of Rietveld analysis; nanoparticle sizes calculated by theScherrer equation and size-strain by Williamson-Hall (W-H) method, using the FullWidth at Half Maximum (FWHM) of the diffraction peaks. The average particlediameter ranges from 4,9nm to 69,5nm. Toxicity tests were performed in vivo todetermine application for NiFe2O4.
Lin, Sen. "Tailoring the nanostructure of sol-gel derived bioactive glasses and investigating their interactions with proteins." Thesis, Imperial College London, 2010. http://hdl.handle.net/10044/1/5584.
Повний текст джерелаLa, Cecilia Daniele. "Comprehensive modeling of agrochemicals biodegradation in soil: A multidisciplinary approach to make informed choices to protect human health and the environment." Thesis, The University of Sydney, 2019. http://hdl.handle.net/2123/20691.
Повний текст джерелаMoon, Jinyoung. "Selective accrual and dynamics of proteinaceous compounds during pedogenesis: testing source and sink selection hypotheses." Diss., Virginia Tech, 2015. http://hdl.handle.net/10919/77030.
Повний текст джерелаPh. D.
Espinoza, Corral Roberto Andres [Verfasser], and Jürgen [Akademischer Betreuer] Soll. "Characterization of new proteins involved in chloroplast biogenesis from Arabidopsis thaliana / Roberto Andres Espinoza Corral ; Betreuer: Jürgen Soll." München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2019. http://d-nb.info/1183572166/34.
Повний текст джерелаYousef, Lina Fayez. "Class-I Elicitins in Relation to Sterol Acquisition and Lipid Profiling of Phytophthora sojae." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1274374956.
Повний текст джерелаWen, Xuejin. "Design, Fabrication, and Characterization of Field-Effect and Impedance Based Biosensors." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1308312352.
Повний текст джерелаPatil, Manali [Verfasser], and Jürgen [Akademischer Betreuer] Soll. "Role of putative vesicle trafficking proteins FZL, Synaptotagmin 5.2 and SNARE_AP in chloroplast development / Manali Patil ; Betreuer: Jürgen Soll." München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2018. http://d-nb.info/1199872024/34.
Повний текст джерелаPereira, Maurício de Sousa. "Application of oxide nanoparticles obtained by proteic sol-gel and mechanical alloying in third generation solar cells." reponame:Repositório Institucional da UFC, 2017. http://www.repositorio.ufc.br/handle/riufc/25532.
Повний текст джерелаSubmitted by Hohana Sanders (hohanasanders@hotmail.com) on 2017-09-04T11:10:34Z No. of bitstreams: 1 2017_tese_mspereira.pdf: 13402245 bytes, checksum: dd889d251f2150005d41a69d0cf73261 (MD5)
Rejected by Marlene Sousa (mmarlene@ufc.br), reason: Trocar arquivo pelo que enviei on 2017-09-05T17:23:42Z (GMT)
Submitted by Hohana Sanders (hohanasanders@hotmail.com) on 2017-09-06T03:47:08Z No. of bitstreams: 1 2017_tese_mspereira.pdf: 13402371 bytes, checksum: 991134ad6964927221010b9bcb4be35f (MD5)
Approved for entry into archive by Marlene Sousa (mmarlene@ufc.br) on 2017-09-06T13:05:51Z (GMT) No. of bitstreams: 1 2017_tese_mspereira.pdf: 13402371 bytes, checksum: 991134ad6964927221010b9bcb4be35f (MD5)
Made available in DSpace on 2017-09-06T13:05:51Z (GMT). No. of bitstreams: 1 2017_tese_mspereira.pdf: 13402371 bytes, checksum: 991134ad6964927221010b9bcb4be35f (MD5) Previous issue date: 2017-08-01
The development of new energy technologies is crucial to climate stability and security in the planet. Considering the current energy consumption on a global scale it becomes evident the need to develop new alternative energy sources, especially those that are preferentially renewable, clean and economical. Among the renewable energy sources currently used, solar energy is an attractive source because it is abundant and free of CO2 . Photovoltaic solar cells are just one of several ways to harness solar energy, converting it directly into electricity. Currently, traditional solar technologies have been used to a limited degree in energy production because of the high costs. However, third generation solar cells offer a potential route for large-scale solar energy deployment because they utilize materials that are abundant in nature and low cost production technologies. Commonly called excitonic solar cells, third generation photovoltaic devices encompass a wide variety of solar cells such as dye-sensitized solar cells and organic solar cells. Both offer a technically and economically reliable alternative to the current concept of photovoltaic devices based on p-n junctions. In this doctoral thesis, nanoparticles of semiconductor oxides and spinel ferrites produced by protein sol-gel and mechanical alloying were applied to dye-sensitized and organic solar cells in order to improve their efficiency and stability. Prior to their application, the nanoparticles had their thermal, structural, optical and magnetic properties characterized. Solar cells efficiency was evaluated by electrical characterization methods such as current–voltage curves and external quantum efficiency measurements, and their stability, when applicable, was studied by accelerated and real outdoor degradation tests. Nanoparticles of semiconduncting SnO2 produced by the proteic sol-gel method were successfully applied as photoanodes in dye-sensitized solar cells. The results confirmed the formation of spherical nanoparticles of rutile SnO2 with an optical absorption band in the ultraviolet region near the visible light range. The performance of the cells was found to be in line with results in the literature. Moreover, nanoparticles of Fe-doped SnO2 diluted magnetic seminconductor and CoFe2O4 spinel ferrite produced by mechanical alloying and proteic sol-gel, respectively, were applied as dopants in the active layer of organic solar cells. An improvement on photovoltaic parameters that may lead to better cell efficiency and stability was observed for devices with doped active layers. The results are indications that the addition of magnetic oxide nanoparticles in the active layer of organic solar cells has the potential to contribute to the extension of lifetime and improvement of efficiency and stability of these devices.
O desenvolvimento de novas tecnologias energéticas é crucial para a estabilidade do clima e segurança do planeta. Considerando o consumo energético atual em escala global torna-se evidente a necessidade do desenvolvimento de novas fontes alternativas de energia, especialmente aquelas que são preferencialmente renováveis, limpas e econômicas. Entre as fontes de energias renováveis usadas atualmente, a energia solar é uma fonte atraente pois é abundante e livre de CO2 . Células solares fotovoltaicas são uma das várias maneiras de aproveitar a energia solar, convertendo-a diretamente em eletricidade. Atualmente, as tecnologias solares tradicionais têm sido utilizadas num grau limitado na produção de energia devido aos custos elevados. Todavia, as células solares de terceira geração oferecem uma rota potencial para implantação de energia solar em larga escala, pois utilizam materiais abundantes na natureza e tecnologias de produção de baixo custo. Comumente denominadas células solares excitônicas, dispositivos fotovoltaicos de terceira geração englobam uma grande variedade de células solares tais como células solares sensibilizadas por corante e células solares orgânicas. Ambas apresentam uma alternativa técnica e economicamente confiável ao conceito atual de dispositivos fotovoltaicos baseados em junção p-n. Nesta tese de doutorado, nanopartículas de óxidos semicondutores e ferritas com estrutura espinélio produzidos por sol-gel proteico e moagem mecânica foram aplicadas em células solares sensibilzadas por corante e orgânicas com o intuito de melhorar sua eficiência e estabilidade. Antes da sua aplicação, as nanopartı́culas tiveram suas propriedades térmicas, estruturais, ópticas e magnéticas caracterizadas. A eficiência das células solares foi avaliada por meio de métodos de caracterização elétrica como a curva corrente-voltagem e eficiência quântica externa enquanto sua estabilidade, quando foi o caso, foi estudada por testes de degradação acelerada e em condições ambientais. Nanopartı́culas de SnO2 semicondutor produzidas pelo método sol-gel proteico foram usadas com sucesso como fotoanodo em células solares sensibilizadas por corante. Os resultados obtidos confirmaram a formação de nanopartı́culas esféricas de SnO2 com estrutura rutı́lio com banda de absorção óptica na região do ultravioleta próximo da faixa de luz visı́vel. O desempenho das células obtidas foi consistente com a literatura. Além disso, nanopartı́culas de óxido semi- condutor magnético diluı́do SnO 2 dopado com Fe e ferrita espinélio CoFe2O4 produzidas por moagem mecânica e sol-gel proteico, respectivamente, foram aplicadas como dopantes na camada ativa de células solares orgânicas. Foi observada uma melhora dos parâmetros fotovoltaicos que pode levar a uma melhor eficiência e estabilidade dos dispositivos com camada ativa dopada. Esses resultados indicam qua a adição de nanopartı́culas de óxidos magnéticos na camada ativa de células solares orgânicas tem o potencial de contribuir para a extensão do tempo de vida e melhoria da eficiência e estabilidade desses dispositivos.
Roman, Gregory T. "The fabrication of novel microfluidic devices for chemical separation and concentration enrichment of amino acids, proteins, peptides, particles, and cells." Diss., Manhattan, Kan. : Kansas State University, 2006. http://hdl.handle.net/2097/206.
Повний текст джерела