Статті в журналах: "Software reconstruction"

1

Rousseau, David. "ATLAS reconstruction software." European Physical Journal C 33, S1 (March 31, 2004): s1038—s1040. http://dx.doi.org/10.1140/epjcd/s2004-03-1805-1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Chevalier, M., R. Cheddadi, and B. M. Chase. "CREST: Climate REconstruction SofTware." Climate of the Past Discussions 10, no. 1 (February 17, 2014): 625–63. http://dx.doi.org/10.5194/cpd-10-625-2014.

Повний текст джерела

Анотація:

Abstract. Several methods currently exist to quantitatively reconstruct palaeoclimatic variables from fossil botanical data. Of these, pdf-based (probability density functions) methods have proven valuable as they can be applied to a wide range of plants assemblages. Most commonly applied to fossil pollen data, their performance, however, can be limited by the taxonomic resolution of the pollen data, as many species may belong to a given pollen-type. Consequently, the climate information associated with different species cannot sometimes not be precisely identified, resulting less accurate reconstructions. This can become particularly problematic in regions of high biodiversity. In this paper, we propose a novel pdf-based method that takes into account the different climatic requirements of each species constituting the broader pollen-type. Pdfs are fitted in two successive steps, with parametric pdfs fitted first for each species, and then a combination of those individual species pdfs into a broader single pdf to represent the pollen-type as a unit. A climate value for the pollen assemblage is estimated from the likelihood function obtained after the multiplication of the pollen-type pdfs, with each being weighted according to its pollen percentage. To test the robustness of the method, we have applied the method to southern Africa as a regional case study, and reconstructed a suite of climatic variables based on extensive botanical data derived from herbarium collections. The reconstructions proved to be accurate for both temperature and precipitation. Predictable exceptions were areas that experience conditions at the extremes of the regional climatic spectra. Importantly, the accuracy of the reconstructed values is independent from the vegetation type where the method is applied or the number of species used. The method used in this study is publicly available in a software package entitled CREST (Climate REconstruction SofTware) and will provide the opportunity to reconstruct reliable quantitative estimates of climatic variables even in areas with high geographical and botanical diversity.

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Caro, Dann Joel, and Ferdinand Pamintuan. "Application of Open-Source 3D Planning Software in Virtual Reconstruction of Complex Maxillofacial Defects." Philippine Journal of Otolaryngology Head and Neck Surgery 36, no. 2 (November 11, 2021): 30. http://dx.doi.org/10.32412/pjohns.v36i2.1801.

Повний текст джерела

Анотація:

ABSTRACT Objective: To present our in-house 3D planning protocol utilizing open-source computer-aided design software and discuss specific applications in reconstruction of various craniomaxillofacial defects, demonstrating a free, accessible, efficient, accurate, and easily learnable alternative to expensive counterparts. Methods: Design: Case Series Setting: Tertiary Private Training Hospital Participants: Ten (10) patients who underwent CAD assisted reconstructive surgeries from February 2017 – May 2018. Results: A total of 10 patients were included; 7 mandibular reconstructions were surgically reconstructed using our 3D planning protocol and achieved symmetric mandibular contour, with good functional occlusion after surgery; 1 cranioplasty and 1 orbital trauma case also achieved good symmetry and adequate correction of enophthalmos respectively. However, inadequate soft tissue correction was seen in 1 case of maxillary reconstruction despite achieving symmetric bony contour. Conclusion: Our 3D planning protocol using open-source CAD applications is a viable alternative to expensive professional counterparts. Additional prospective studies may better demonstrate benefits in terms of accuracy and decreasing intraoperative time in craniomaxillofacial and head and neck reconstruction.

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Lange, David J. "The CMS Reconstruction Software." Journal of Physics: Conference Series 331, no. 3 (December 23, 2011): 032020. http://dx.doi.org/10.1088/1742-6596/331/3/032020.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Brett, Paul. "Using text reconstruction software." ELT Journal 48, no. 4 (October 1994): 329–36. http://dx.doi.org/10.1093/elt/48.4.329.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

D'Ambros, Marco, and Michele Lanza. "Visual software evolution reconstruction." Journal of Software Maintenance and Evolution: Research and Practice 21, no. 3 (May 2009): 217–32. http://dx.doi.org/10.1002/smr.407.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Chevalier, M., and B. M. Chase. "CREST – Climate Reconstruction SofTware." Quaternary International 404 (June 2016): 204. http://dx.doi.org/10.1016/j.quaint.2015.08.188.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Ganguly, Poulami Somanya, Daniël M. Pelt, Doga Gürsoy, Francesco de Carlo, and K. Joost Batenburg. "Improving reproducibility in synchrotron tomography using implementation-adapted filters." Journal of Synchrotron Radiation 28, no. 5 (August 12, 2021): 1583–97. http://dx.doi.org/10.1107/s1600577521007153.

Повний текст джерела

Анотація:

For reconstructing large tomographic datasets fast, filtered backprojection-type or Fourier-based algorithms are still the method of choice, as they have been for decades. These robust and computationally efficient algorithms have been integrated in a broad range of software packages. The continuous mathematical formulas used for image reconstruction in such algorithms are unambiguous. However, variations in discretization and interpolation result in quantitative differences between reconstructed images, and corresponding segmentations, obtained from different software. This hinders reproducibility of experimental results, making it difficult to ensure that results and conclusions from experiments can be reproduced at different facilities or using different software. In this paper, a way to reduce such differences by optimizing the filter used in analytical algorithms is proposed. These filters can be computed using a wrapper routine around a black-box implementation of a reconstruction algorithm, and lead to quantitatively similar reconstructions. Use cases for this approach are demonstrated by computing implementation-adapted filters for several open-source implementations and applying them to simulated phantoms and real-world data acquired at the synchrotron. Our contribution to a reproducible reconstruction step forms a building block towards a fully reproducible synchrotron tomography data processing pipeline.

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Hou, Ying-Rui, Suzanne Klaver, Sneha Malde, Rosen Matev, Dmitry Popov, and Miroslav Saur. "Monitoring reconstruction software in LHCb." EPJ Web of Conferences 251 (2021): 03044. http://dx.doi.org/10.1051/epjconf/202125103044.

Повний текст джерела

Анотація:

The LHCb detector at the LHC is currently undergoing a major upgrade to increase its full detector read-out rate to 30 MHz. In addition to the detector hardware modernisation, the new trigger system will be software-only. The code base of the new trigger system must be thoroughly tested for data flow, functionality and physics performance. Currently, the testing procedure is based on a system of nightly builds and continuous integration tests of each new code development. The continuous integration tests are now extended to test and evaluate high-level quantities related to LHCb’s physics program, such as track reconstruction and particle identification, which is described in this paper. Before each merge request, the differences after the change in code are shown and automatically compared using an interactive visualisation tool, allowing easy verification of all relevant quantities. This approach gives an extensive control over the physics performance of the new code resulting into better preparation for data taking with the upgraded LHCb detector at Run 3.

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Naumov, A. S. "Fragmented Image Reconstruction Software Development." INFORMACIONNYE TEHNOLOGII 24, no. 7 (July 19, 2018): 487–95. http://dx.doi.org/10.17587/it.24.487-495.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Stoermer, Christoph, Anthony Rowe, Liam O'Brien, and Chris Verhoef. "Model-centric software architecture reconstruction." Software: Practice and Experience 36, no. 4 (2006): 333–63. http://dx.doi.org/10.1002/spe.699.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Joy, David C., and Rodney D. Bunn. "Software for the reconstruction of off-axis electron holograms." Proceedings, annual meeting, Electron Microscopy Society of America 51 (August 1, 1993): 550–51. http://dx.doi.org/10.1017/s0424820100148587.

Повний текст джерела

Анотація:

Holography is a two step imaging process. After a hologram has been recorded it must then be reconstructed in order to obtain the stored image information. Gabor originally envisaged the use of optical reconstruction methods, but these are difficult to set up and limited in their flexibility. The alternative is to use digital techniques to reconstruct and manipulate the hologram and its reconstructions. This paper describes a program designed for the reconstruction of off-axis electron holograms.An off-axis electron hologram is an interferogram between a reference electron wave and the signal wave which has passed through the specimen. The hologram consists of a pattern of fringes modulated in position and amplitude as a result of phase shifts in, and scattering of, the signal wave. To recover phase and amplitude images from the hologram it is necessary to perform three operational steps. Firstly, the digitized hologram is Fourier transformed producing an array of complex numbers, one for each pixel in the original hologram.

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Jeon, Kiwan, and Chang-Ock Lee. "CoReHA 2.0: A Software Package forIn VivoMREIT Experiments." Computational and Mathematical Methods in Medicine 2013 (2013): 1–8. http://dx.doi.org/10.1155/2013/941745.

Повний текст джерела

Анотація:

Magnetic resonance electrical impedance tomography (MREIT) is a new medical imaging modality visualizing static conductivity images of electrically conducting subjects. Recently, MREIT has rapidly progressed in its theory, algorithm, and experiment technique and now reached to the stage ofin vivoanimal experiments. In this paper, we present a software, named CoReHA 2.0 standing for the second version of conductivity reconstructor using harmonic algorithms, to facilitatein vivoMREIT reconstruction of conductivity image. This software offers various computational tools including preprocessing of MREIT data, identification of 2D geometry of the imaging domain and electrode positions, and reconstruction of cross-sectional scaled conductivity images from MREIT data. In particular, in the new version, we added several tools including ramp-preserving denoising, harmonic inpainting, and local harmonicBzalgorithm to deal with data fromin vivoexperiments. The presented software will be useful to researchers in the field of MREIT for simulation, validation, and further technical development.

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Park, Jin Seo, Sung Bae Hwang, Min Suk Chung, Dong Sun Shin, Hyo Seok Park, Yong Sook Lee, and Byeong Seok Shin. "Three Dimensional Automatic Surface Reconstruction Software." Journal of Korean Society of Medical Informatics 13, no. 4 (2007): 385. http://dx.doi.org/10.4258/jksmi.2007.13.4.385.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Duboz, Cecile, Siew Ching Tan, Steve Quenette, Gordon S. Lister, and Bill Appelbe. "PlatyPlusPlus - Reconstruction software with a difference." ASEG Extended Abstracts 2003, no. 2 (August 2003): 1–4. http://dx.doi.org/10.1071/aseg2003ab043.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Galletti, M., M. Galimberti, D. Giulietti, and A. Curcio. "Ultra short pulse reconstruction software: GROG." Journal of Instrumentation 11, no. 07 (July 22, 2016): C07011. http://dx.doi.org/10.1088/1748-0221/11/07/c07011.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Becherini, Yvonne. "ANTARES: Software organisation, reconstruction, performance studies." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 567, no. 2 (November 2006): 477–79. http://dx.doi.org/10.1016/j.nima.2006.05.253.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Schmidt, Frederick, Stephen MacDonell, and Andy M. Connor. "Multi-Objective Reconstruction of Software Architecture." International Journal of Software Engineering and Knowledge Engineering 28, no. 06 (June 2018): 869–92. http://dx.doi.org/10.1142/s0218194018500262.

Повний текст джерела

Анотація:

Design erosion is a persistent problem within the software engineering discipline. Software designs tend to deteriorate over time and there is a need for tools and techniques that support software architects when dealing with legacy systems. This paper presents an evaluation of a search-based software engineering (SBSE) approach intended to recover high-level architecture designs of software systems by structuring low-level artifacts into high-level architecture artifact configurations. In particular, this paper describes the performance evaluation of a number of metaheuristic search algorithms applied to architecture reconstruction problems with high dimensionality in terms of objectives. These problems have been selected as representative of the typical challenges faced by software architects dealing with legacy systems and the results inform the ongoing development of a software tool that supports the analysis of trade-offs between different reconstructed architectures.

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Cardona, Albert, Stephan Saalfeld, Johannes Schindelin, Ignacio Arganda-Carreras, Stephan Preibisch, Mark Longair, Pavel Tomancak, Volker Hartenstein, and Rodney J. Douglas. "TrakEM2 Software for Neural Circuit Reconstruction." PLoS ONE 7, no. 6 (June 19, 2012): e38011. http://dx.doi.org/10.1371/journal.pone.0038011.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Qiu, Dehong, Qifeng Zhang, and Shaohong Fang. "Reconstructing Software High-Level Architecture by Clustering Weighted Directed Class Graph." International Journal of Software Engineering and Knowledge Engineering 25, no. 04 (May 2015): 701–26. http://dx.doi.org/10.1142/s0218194015500072.

Повний текст джерела

Анотація:

Software architecture reconstruction plays an important role in software reuse, evolution and maintenance. Clustering is a promising technique for software architecture reconstruction. However, the representation of software, which serves as clustering input, and the clustering algorithm need to be improved in real applications. The representation should contain appropriate and adequate information of software. Furthermore, the clustering algorithm should be adapted to the particular demands of software architecture reconstruction well. In this paper, we first extract Weighted Directed Class Graph (WDCG) to represent object-oriented software. WDCG is a structural and quantitative representation of software, which contains not only the static information of software source code but also the dynamic information of software execution. Then we propose a WDCG-based Clustering Algorithm (WDCG-CA) to reconstruct high-level software architecture. WDCG-CA makes full use of the structural and quantitative information of WDCG, and avoids wrong compositions and arbitrary partitions successfully in the process of reconstructing software architecture. We introduce four metrics to evaluate the performance of WDCG-CA. The results of the comparative experiments show that WDCG-CA outperforms the comparative approaches in most cases in terms of the four metrics.

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Gumpert, C., A. Salzburger, M. Kiehn, J. Hrdinka, and N. Calace. "ACTS: from ATLAS software towards a common track reconstruction software." Journal of Physics: Conference Series 898 (October 2017): 042011. http://dx.doi.org/10.1088/1742-6596/898/4/042011.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

KANG, SUNGWON, SEONAH LEE, and DANHYUNG LEE. "A FRAMEWORK FOR TOOL-BASED SOFTWARE ARCHITECTURE RECONSTRUCTION." International Journal of Software Engineering and Knowledge Engineering 19, no. 02 (March 2009): 283–305. http://dx.doi.org/10.1142/s0218194009004167.

Повний текст джерела

Анотація:

For software with nontrivial size and complexity, it is not feasible to manually perform architecture reconstruction. Therefore it is essential for the software architecture miner who is mining architecture from the existing software to have a well-defined software architecture reconstruction process that helps incorporate as much tool use as possible at the appropriate steps of architecture reconstruction. There are some existing software architecture reconstruction frameworks but they do not provide guidelines on how to systematically utilize tools to produce architecture views for a reconstruction purpose. In this paper, we propose a framework for tool-based software architecture reconstruction. This framework consists of a generic process for software architecture reconstruction and the steps to derive from it a concrete tool-based process to be used for actual architecture reconstruction. The architecture miner can use this framework to analyze source code for modifying source code as well as to reconstruct software architecture from source code.

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Barlow, Nick. "Prompt reconstruction of LHC collision data with the ATLAS reconstruction software." Journal of Physics: Conference Series 331, no. 3 (December 23, 2011): 032004. http://dx.doi.org/10.1088/1742-6596/331/3/032004.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Enesi, I., A. Kuqi, and E. Zanaj. "Quality of 3D reconstruction based on photogrammetry for small objects, a case study." IOP Conference Series: Materials Science and Engineering 1254, no. 1 (September 1, 2022): 012039. http://dx.doi.org/10.1088/1757-899x/1254/1/012039.

Повний текст джерела

Анотація:

Abstract 3D reconstructions are widely used, the main challenge of them is the accuracy for small and detailed objects. Various software exist for 3D reconstruction, free and paid ones with various performances. In this paper the performance of 3D object reconstruction will be evaluated in terms of size accuracy regarding number of source photos. The aim of the paper is analysing the size accuracy of the reconstructed 3D models based on photogrammetry for small objects by configuring pipeline in Meshroom. Meshroom is used for 3D photogrammetry reconstruction and MeshLab is used for measurement, both are free software. Experimental results show a high accuracy for objects sizes. Although the tests are done for small objects, the results are promising for cloning body parts used for prosthetics.

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Dias, Paulo Eduardo Miamoto, Thiago Leite Beaini, and Rodolfo Francisco Haltenhoff Melani. "Evaluation of osifix software with craniofacial anthropometric purposes." Journal of Research in Dentistry 1, no. 4 (December 14, 2013): 351. http://dx.doi.org/10.19177/jrd.v1e42013351-367.

Повний текст джерела

Анотація:

Forensic Facial Reconstruction is a branch of Forensic Anthropology that attempts to approximate the appearance of an unknown individual through soft tissue reconstruction, after anthropological craniofacial analysis is carried out. The reconstruction publicized in the media aims at a recognition, which can trigger formal human identification. Knowing the anthropometric relationships between hard and soft tissues is useful to increase the accuracy of reconstructions. It was sought to evaluate the performance of the software OsiriX as a tool for anthropometric analysis of both hard and soft tissues. In cone beam CBCT scans of eight individuals, seven linear distances, determined by 14 anatomical landmarks on hard and soft tissues were measured. Intra-observer and inter-observer variation were evaluated by two criteria: reproducibility of landmark location on skull surface and reproducibility of measurement values in millimeters. For intra-observer evaluation, the sample was measured twice within an interval of two weeks. To assess inter-observer variation three independent operators performed measurements once. For reproducibility of anatomical landmarks, the metadata containing the distance in millimeters from each point to the origin of the x, y and z axis were obtained from the software. Means and standard deviations for the set of linear measurements and coordinates of the points were analyzed, and the difference between the standard deviations was used to classify reproducibility. For intra and inter-observer variations, most of the landmarks were located with less than 0.5mm of difference between measurements. For the corresponding measurements, made between these landmarks, most were repeated with less than 1.5 mm of difference for both intra and inter-observer variation. In practical terms, the differences detected did not hamper the use of the software as a tool for anthropometric studies. The use of OsiriX is an alternative for anthropological study of craniofacial hard and soft tissues from CBCT.

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Wójcik, Artur, Magdalena Niemczewska-Wójcik, and Jerzy Sładek. "Assessment of Free-Form Surfaces’ Reconstruction Accuracy." Metrology and Measurement Systems 24, no. 2 (June 27, 2017): 303–12. http://dx.doi.org/10.1515/mms-2017-0035.

Повний текст джерела

Анотація:

AbstractThe paper presents the problem of assessing the accuracy of reconstructing free-form surfaces in the CMM/CAD/CAM/CNC systems. The system structure comprises a coordinate measuring machine (CMM) PMM 12106 equipped with a contact scanning probe, a 3-axis Arrow 500 Vertical Machining Center, QUINDOS software and Catia software. For the purpose of surface digitalization, a radius correction algorithm was developed. The surface reconstructing errors for the presented system were assessed and analysed with respect to offset points. The accuracy assessment exhibit error values in the reconstruction of a free-form surface in a range of ± 0.02 mm, which, as it is shown by the analysis, result from a systematic error.

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Kolla, Eduard, Ján Ondruš, and Peter Vertaľ. "Reconstruction of traffic situations from digital video-recording using method of volumetric kinetic mapping." Archives of Automotive Engineering – Archiwum Motoryzacji 84, no. 2 (June 28, 2019): 147–70. http://dx.doi.org/10.14669/am.vol84.art11.

Повний текст джерела

Анотація:

In the past the traffic accident reconstruction was based in principle only on indirect methods that use accident marks and witness reports. These data were then used within backward reconstruction of event for determination of motion status of accident participants and expression of desirable quantities as are initial velocities, impact velocities, distances travelled or temporal conditions. These methods and their accuracy are dependent on the width of intervals of input quantities or on limited possibilities for motion synchronization between numerable participants of road traffic accidents. Existence of footage from CCTV cameras that captures traffic situations presents very valuable source of information about these accidents. The goal of the article is proposal of a volumetric kinetic mapping (VKM) method of accident reconstruction from CCTV footage. The method is based on synthesis of videoediting, videoanalysis and kinetic simulation using dedicated software for accident reconstruction. The method was furthermore validated for speed-time and distance-time variables by means of experimental test runs and by subsequent application of the method in the reconstruction of these tests using PC-Crash simulation software and two videoediting software packages. Results of the reconstructions of validation runs using VKM method were then verified by comparing them to the measured data from Corrsys Datron Microstar measuring system.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Ducasse, S., and D. Pollet. "Software Architecture Reconstruction: A Process-Oriented Taxonomy." IEEE Transactions on Software Engineering 35, no. 4 (July 2009): 573–91. http://dx.doi.org/10.1109/tse.2009.19.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Müller, Jan, Dirk Fimmel, Renate Merker, and Rainer Schaffer. "A Hardware–Software System for Tomographic Reconstruction." Journal of Circuits, Systems and Computers 12, no. 02 (April 2003): 203–29. http://dx.doi.org/10.1142/s021812660300074x.

Повний текст джерела

Анотація:

We present the design of a hardware–software system for the reconstruction of tomographic images. In a systematic approach we developed the parallel processor array, a reconfigurable hardware controller and processing kernel, and the software control up to the integration into a graphical user interface. The processor array acting as a hardware accelerator, is constructed using theoretical results and methods of application-specific hardware design. The reconfigurability of the system allows one to utilize a much wider realm of algorithms than the three reconstruction algorithms implemented so far. In the paper we discuss the system design at different levels from algorithm transformations to board development.

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Pérez, Daniel Hugo Cámpora, and Ben Couturier. "SIMD studies in the LHCb reconstruction software." Journal of Physics: Conference Series 664, no. 9 (December 23, 2015): 092004. http://dx.doi.org/10.1088/1742-6596/664/9/092004.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Koppenburg, Patrick. "Reconstruction and analysis software environment of LHCb." Nuclear Physics B - Proceedings Supplements 156, no. 1 (June 2006): 213–16. http://dx.doi.org/10.1016/j.nuclphysbps.2006.02.128.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Ziegler, V., N. A. Baltzell, F. Bossù, D. S. Carman, P. Chatagnon, M. Contalbrigo, R. De Vita, et al. "The CLAS12 software framework and event reconstruction." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 959 (April 2020): 163472. http://dx.doi.org/10.1016/j.nima.2020.163472.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Kim, Hannah, Tae-Geun Son, Hyunchul Cho, Eungjune Shim, Bo-Yeon Hwang, Jung-Woo Lee, and Youngjun Kim. "Automated maxillofacial reconstruction software: development and evaluation." Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization 8, no. 2 (May 16, 2019): 115–25. http://dx.doi.org/10.1080/21681163.2019.1608308.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Mastronarde, D. "Tomographic Reconstruction with the IMOD Software Package." Microscopy and Microanalysis 12, S02 (July 31, 2006): 178–79. http://dx.doi.org/10.1017/s1431927606069467.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Jing, Ma, Fu Yanfang, and Tian Penghui. "Research on Digital Holographic 3D Reconstruction Software." International Journal of Advanced Network, Monitoring and Controls 3, no. 2 (2018): 62–65. http://dx.doi.org/10.21307/ijanmc-2018-039.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Lawton, Jeffrey A., and B. V. Venkataram Prasad. "Automated Software Package for Icosahedral Virus Reconstruction." Journal of Structural Biology 116, no. 1 (January 1996): 209–15. http://dx.doi.org/10.1006/jsbi.1996.0032.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Pham, Annette M., Amir A. Rafii, Marc C. Metzger, Amir Jamali, and Bradley E. Strong. "Computer modeling and intraoperative navigation in maxillofacial surgery." Otolaryngology–Head and Neck Surgery 137, no. 4 (October 2007): 624–31. http://dx.doi.org/10.1016/j.otohns.2007.06.719.

Повний текст джерела

Анотація:

Objectives Recent advances in computer-modeling software allow reconstruction of facial symmetry in a virtual environment. This study evaluates the use of preoperative computer modeling and intraoperative navigation to guide reconstruction of the max-illofacial skeleton. Methods Three patients with traumatic maxillofacial deformities received preoperative, thin-cut axial CT scans. Three-dimensional reconstructions, virtual osteotomies, and bony reductions were performed using MIMICS planning software (Materialise, Ann Arbor, MI). The original and “repaired” virtual datasets were then imported into an intraoperative navigation system and used to guide the surgical repair. Results Postoperative CT scans and photographs reveal excellent correction of enophthalmos to within 1 mm in patient 1, significant improvement in symmetry of the nasoethmoid complex in patient 2, and reconstruction of the zygomaticomaxillary complex location to within 1 mm in patient 3. Conclusion Computer modeling and intraoperative navigation is a relatively new tool that can assist surgeons with reconstruction of the maxillofacial skeleton.

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Sardari Nia, Peyman, Jules R. Olsthoorn, Samuel Heuts, and Jos G. Maessen. "Interactive 3D Reconstruction of Pulmonary Anatomy for Preoperative Planning, Virtual Simulation, and Intraoperative Guiding in Video-Assisted Thoracoscopic Lung Surgery." Innovations: Technology and Techniques in Cardiothoracic and Vascular Surgery 14, no. 1 (February 2019): 17–26. http://dx.doi.org/10.1177/1556984519826321.

Повний текст джерела

Анотація:

Objectives Routine imaging modalities combined with state-of-the-art reconstruction software can substantially improve preoperative planning and simplify complex procedure by enhancing the surgeon’s knowledge of the patient’s specific anatomy. The aim of the current study was to demonstrate the feasibility of interactive three-dimensional (3D) computed tomography (CT) reconstructions for preoperative planning and intraoperative guiding in video-assisted thoracoscopic lung surgery (VATS) with 3D vision. Methods Twenty-five consecutive patients referred for an anatomic pulmonary resection by a single surgeon were included. Data were collected prospectively. All patients underwent a CT angiography in the diagnostic pathway prior to referral. 3D reconstruction of the pulmonary anatomy was obtained from CT scans with dedicated software. An interactive PDF file of the 3D reconstruction with virtual resection was created, in which all the pulmonary structures could be individually selected. Furthermore, the reconstructions were used for intraoperative guiding on double monitor during VATS with 3D vision. Results In total, 26 procedures were performed for 5 benign and 21 malignant conditions. Lobectomy and segmentectomy were performed in 20 (76.9 %) and 6 (23.1%) cases, respectively. In all patients, preoperative 3D reconstruction of pulmonary vessels corresponded with the intraoperative findings. Reconstructions revealed anatomic variations in 4 (15.4%) patients. No conversion to thoracotomy or in-hospital mortality occurred. Conclusions Preoperative planning with interactive 3D CT reconstruction is a useful method to enhance the surgeon’s knowledge of the patient’s specific anatomy and to reveal anatomic variations. Intraoperative 3D guiding in VATS with 3D vision is feasible and could contribute to the safety and accuracy of anatomic resection.

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Niu, Xiaomei. "Interactive 3D reconstruction method of fuzzy static images in social media." Journal of Intelligent Systems 31, no. 1 (January 1, 2022): 806–16. http://dx.doi.org/10.1515/jisys-2022-0049.

Повний текст джерела

Анотація:

Abstract Because the traditional social media fuzzy static image interactive three-dimensional (3D) reconstruction method has the problem of poor reconstruction completeness and long reconstruction time, the social media fuzzy static image interactive 3D reconstruction method is proposed. For preprocessing the fuzzy static image of social media, the Harris corner detection method is used to extract the feature points of the preprocessed fuzzy static image of social media. According to the extraction results, the parameter estimation algorithm of contrast divergence is used to learn the restricted Boltzmann machine (RBM) network model, and the RBM network model is divided into input, output, and hidden layers. By combining the RBM-based joint dictionary learning method and a sparse representation model, an interactive 3D reconstruction of fuzzy static images in social media is achieved. Experimental results based on the CAD software show that the proposed method has a reconstruction completeness of above 95% and the reconstruction time is less than 15 s, improving the completeness and efficiency of the reconstruction, effectively reconstructing the fuzzy static images in social media, and increasing the sense of reality of social media images.

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Kussainov, A. S., and N. O. Saduev. "Homemade computed tomography setup with FDK reconstruction software." Journal of Physics: Conference Series 1391 (November 2019): 012086. http://dx.doi.org/10.1088/1742-6596/1391/1/012086.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Mitrevski, Jovan. "Preparing ATLAS reconstruction software for LHC's Run 2." Journal of Physics: Conference Series 664, no. 7 (December 23, 2015): 072034. http://dx.doi.org/10.1088/1742-6596/664/7/072034.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Guamán, Daniel, Jennifer Pérez, Jessica Diaz, and Carlos E. Cuesta. "Towards a reference process for software architecture reconstruction." IET Software 14, no. 6 (December 1, 2020): 592–606. http://dx.doi.org/10.1049/iet-sen.2019.0246.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Herraiz, J. L., S. España, J. J. Vaquero, M. Desco, and J. M. Udías. "FIRST: Fast Iterative Reconstruction Software for (PET) tomography." Physics in Medicine and Biology 51, no. 18 (August 30, 2006): 4547–65. http://dx.doi.org/10.1088/0031-9155/51/18/007.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Mastronarde, D. "Automated Tomographic Reconstruction in the IMOD Software Package." Microscopy and Microanalysis 19, S2 (August 2013): 544–45. http://dx.doi.org/10.1017/s1431927613004716.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Thielemans, Kris, Charalampos Tsoumpas, Sanida Mustafovic, Tobias Beisel, Pablo Aguiar, Nikolaos Dikaios, and Matthew W. Jacobson. "STIR: software for tomographic image reconstruction release 2." Physics in Medicine and Biology 57, no. 4 (January 31, 2012): 867–83. http://dx.doi.org/10.1088/0031-9155/57/4/867.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Giarola, S., G. Grippa, and F. Meneguzzo. "DI.M.C.OR: A software package for diagnostic wind reconstruction." Environmental Software 10, no. 2 (January 1995): 129–36. http://dx.doi.org/10.1016/0266-9838(95)00004-5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Jarritt, P. H. "76. A multicentre assessment of SPET reconstruction software." Nuclear Medicine Communications 14, no. 1 (April 1993): 276. http://dx.doi.org/10.1097/00006231-199304000-00078.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Wisselink, Hendrik Joost, Gert Jan Pelgrim, Mieneke Rook, Maarten van den Berge, Kees Slump, Yeshu Nagaraj, Peter van Ooijen, Matthijs Oudkerk, and Rozemarijn Vliegenthart. "Potential for dose reduction in CT emphysema densitometry with post-scan noise reduction: a phantom study." British Journal of Radiology 93, no. 1105 (January 2020): 20181019. http://dx.doi.org/10.1259/bjr.20181019.

Повний текст джерела

Анотація:

Objective: The aim of this phantom study was to investigate the effect of scan parameters and noise suppression techniques on the minimum radiation dose for acceptable image quality for CT emphysema densitometry. Methods: The COPDGene phantom was scanned on a third generation dual-source CT system with 16 scan setups (CTDIvol 0.035–10.680 mGy). Images were reconstructed at 1.0/0.7 mm slice thickness/increment, with three kernels (one soft, two hard), filtered backprojection and three grades of third-generation iterative reconstruction (IR). Additionally, deep learning-based noise suppression software was applied. Main outcomes: overlap in area of the normalized histograms of CT density for the emphysema insert and lung material, and the radiation dose required for a maximum of 4.3% overlap (defined as acceptable image quality). Results: In total, 384 scan reconstructions were analyzed. Decreasing radiation dose resulted in an exponential increase of the overlap in normalized histograms of CT density. The overlap was 11–91% for the lowest dose setting (CTDIvol 0.035mGy). The soft kernel reconstruction showed less histogram overlap than hard filter kernels. IR and noise suppression also reduced overlap. Using intermediate grade IR plus noise suppression software allowed for 85% radiation dose reduction while maintaining acceptable image quality. Conclusion: CT density histogram overlap can quantify the degree of discernibility of emphysema and healthy lung tissue. Noise suppression software, IR, and soft reconstruction kernels substantially decrease the dose required for acceptable image quality. Advances in knowledge: Noise suppression software, IR, and soft reconstruction kernels allow radiation dose reduction by 85% while still allowing differentiation between emphysema and normal lung tissue.

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Chevalier, M., R. Cheddadi, and B. M. Chase. "CREST (Climate REconstruction SofTware): a probability density function (PDF)-based quantitative climate reconstruction method." Climate of the Past 10, no. 6 (November 28, 2014): 2081–98. http://dx.doi.org/10.5194/cp-10-2081-2014.

Повний текст джерела

Анотація:

Abstract. Several methods currently exist to quantitatively reconstruct palaeoclimatic variables from fossil botanical data. Of these, probability density function (PDF)-based methods have proven valuable as they can be applied to a wide range of plant assemblages. Most commonly applied to fossil pollen data, their performance, however, can be limited by the taxonomic resolution of the pollen data, as many species may belong to a given pollen type. Consequently, the climate information associated with different species cannot always be precisely identified, resulting in less-accurate reconstructions. This can become particularly problematic in regions of high biodiversity. In this paper, we propose a novel PDF-based method that takes into account the different climatic requirements of each species constituting the broader pollen type. PDFs are fitted in two successive steps, with parametric PDFs fitted first for each species and then a combination of those individual species PDFs into a broader single PDF to represent the pollen type as a unit. A climate value for the pollen assemblage is estimated from the likelihood function obtained after the multiplication of the pollen-type PDFs, with each being weighted according to its pollen percentage. To test its performance, we have applied the method to southern Africa as a regional case study and reconstructed a suite of climatic variables (e.g. winter and summer temperature and precipitation, mean annual aridity, rainfall seasonality). The reconstructions are shown to be accurate for both temperature and precipitation. Predictable exceptions were areas that experience conditions at the extremes of the regional climatic spectra. Importantly, the accuracy of the reconstructed values is independent of the vegetation type where the method is applied or the number of species used. The method used in this study is publicly available in a software package entitled CREST (Climate REconstruction SofTware) and will provide the opportunity to reconstruct quantitative estimates of climatic variables even in areas with high geographical and botanical diversity.

Стилі APA, Harvard, Vancouver, ISO та ін.

50

De Geuser, Frédéric, and Baptiste Gault. "Reflections on the Projection of Ions in Atom Probe Tomography." Microscopy and Microanalysis 23, no. 2 (February 2, 2017): 238–46. http://dx.doi.org/10.1017/s1431927616012721.

Повний текст джерела

Анотація:

AbstractThere are two main projections used to transform, and reconstruct, field ion micrographs or atom probe tomography data into atomic coordinates at the specimen surface and, subsequently, in three dimensions. In this article, we present a perspective on the strength of the azimuthal equidistant projection in comparison with the more widely used and well-established point projection (or pseudo-stereographic projection), which underpins data reconstruction in most software packages currently in use across the community. After an overview of the reconstruction methodology, we demonstrate that the azimuthal equidistant is more robust with regards to errors on the parameters used to perform the reconstruction and is therefore more likely to yield more accurate tomographic reconstructions.

Стилі APA, Harvard, Vancouver, ISO та ін.

Статті в журналах з теми "Software reconstruction"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями