Готові списки джерел за темами / Sn-Te alloys / Статті в журналах

Статті в журналах з теми "Sn-Te alloys"

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Sn-Te alloys.
Автор: Grafiati
Опубліковано: 6 вересня 2023
Оновлено: 7 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Sn-Te alloys".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Kumar, Bhupendra, Manas Paliwal, Chandra Sekhar Tiwary, and Min-Kyu Paek. "Thermodynamic Optimization of the Ternary Ga-Sn-Te System Using Modified Quasichemical Model." Metals 11, no. 9 (August 30, 2021): 1363. http://dx.doi.org/10.3390/met11091363.

Повний текст джерела
Анотація:
Thermoelectric (TE) materials are of great interest to many researchers because they directly convert electric and thermal energy in a solid state. Various materials such as chalcogenides, clathrates, skutterudites, eutectic alloys, and intermetallic alloys have been explored for TE applications. The Ga-Sn-Te system exhibits promising potential as an alternative to the lead telluride (PbTe) based alloys, which are harmful to environments because of Pb toxicity. Therefore, in this study, thermodynamic optimization and critical evaluation of binary Ga-Sn, binary Sn-Te, and ternary Ga-Sn-Te systems have been carried out over the whole composition range from room temperature to above liquidus temperature using the CALPHAD method. It is observed that Sn-Te and Ga-Te liquids show the strong negative deviation from the ideal solution behavior. In contrast, the Ga-Sn liquid solution has a positive mixing enthalpy. These different thermodynamic properties of liquid solution were explicitly described using Modified Quasichemical Model (MQM) in the pair approximation. The asymmetry of ternary liquid solution in the Ga-Sn-Te system was considered by adopting the toop-like interpolation method based on the intrinsic property of each binary. The solid phase of SnTe was optimized using Compound Energy Formalism (CEF) to explain the high temperature homogeneity range, whereas solid solution, Body-Centered Tetragonal (BCT) was optimized using a regular solution model. Thermodynamic properties and phase diagram in the Ga-Sn-Te and its sub-systems were reproduced successfully by the optimized model parameters. Using the developed database, we also suggested several ternary eutectic compositions for designing TE alloy with improved properties.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Liao, Chien-Neng, and Ching-Hua Lee. "Suppression of vigorous liquid Sn/Te reactions by Sn–Cu solder alloys." Journal of Materials Research 23, no. 12 (December 2008): 3303–8. http://dx.doi.org/10.1557/jmr.2008.0409.

Повний текст джерела
Анотація:
Reactions of molten Sn–xCu (x = 0.05 to 1.0) alloys with Te substrate at 250 °C were investigated. A dosage of 0.1 wt% Cu in Sn is found to be effective in suppressing the vigorous Sn/Te reaction by forming a thin CuTe at the solder/Te interface. The CuTe morphology changes from irregular clusters into a layered structure with increasing Cu content in Sn. With the same reaction time, the CuTe thickness increases proportionally to the square root of Cu content in Sn–Cu alloys, suggesting a diffusion-controlled growth for CuTe.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Halm, Th, W. Hinz, and W. Hoyer. "Neutron scattering on molten Ge-Sn-Te alloys." Physica Scripta T57 (January 1, 1995): 33–35. http://dx.doi.org/10.1088/0031-8949/1995/t57/006.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Gelbstein, Yaniv. "Pb1−x Sn x Te Alloys: Application Considerations." Journal of Electronic Materials 40, no. 5 (December 8, 2010): 533–36. http://dx.doi.org/10.1007/s11664-010-1435-6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Rashad, M., R. Amin, and M. M. Hafiz. "Crystallization kinetics of glassy Se–Te–Sn alloys." Canadian Journal of Physics 93, no. 8 (August 2015): 898–904. http://dx.doi.org/10.1139/cjp-2014-0186.

Повний текст джерела
Анотація:
The present article deals with the differential thermal analyses (DTA) study of Se–Te glasses containing Sn. DTA runs are taken at six different heating rates (5, 10, 15, 18, 20, and 22 K min−1). The crystallization data are examined in terms of modified Kissinger, Mahadevan method, and Augis and Bennett approximation for the non-isothermal crystallization. Results of DTA under non-isothermal conditions on the glasses of the Se80Te20--xSnx (x = 3 and 9) are reported and discussed at different heating rates. The glass transition temperatures (Tg), the onset crystallization temperatures (Tc), and the peak temperature of crystallization (Tp) were found to be dependent on the compositions and the heating rates. From the dependence on heating rates of (Tg) and (Tp) the activation energy for glass transition (Eg) and the activation energy for crystallization (Ec) are calculated and their composition dependence discussed.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Марченко, А. В., П. П. Серегин, Е. И. Теруков та К. Б. Шахович. "Антиструктурные дефекты в полупроводниковых стеклах Ge-Te и Ge-As-Te". Физика и техника полупроводников 53, № 5 (2019): 718. http://dx.doi.org/10.21883/ftp.2019.05.47570.9032.

Повний текст джерела
Анотація:
AbstractThe formation of antisite defects in Ge_20Te_80 and Ge_15As_4Te_81 vitreous alloys in the form of tin atoms in tellurium sites and tellurium atoms in germanium sites is shown by emission Mössbauer spectroscopy with the ^119 mm Sn(^119 m Sn), ^119 m Te(^119 m Sn), ^125Sn(^125Te), and ^125 m Te(^125Te) isotopes. It is shown that the isovalent substitution of germanium atoms by tin atoms does not vary the symmetry of the local surrounding of germanium sites, while tin and tellurium atoms reconstruct their local surrounding in sites unnatural for them.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Neumann, Hartmut, Walter Hoyer, and Manfred Wobst. "Neutron and X-ray Scattering on Liquid Eutectic Ge-Te, Sn-Te and Pb-Te Alloys." Zeitschrift für Naturforschung A 46, no. 9 (September 1, 1991): 739–45. http://dx.doi.org/10.1515/zna-1991-0902.

Повний текст джерела
Анотація:
AbstractFrom neutron and X-ray diffraction investigations on liquid Ge15Te85, Sn16Te84 and Pb14.5Te85.5 alloys the coordination numbers and nearest neighbour distances of these systems are obtained. The partial structure factors and partial pair correlations reveal that the short-range order of the eutectic Ge -Te melt differs from that of the eutectic Sn-Te and Pb-Te melts
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Venkatraman, Mahadevan, Andreas Schlieper, Roger Blachnik, and Bernd Gather. "The Excess Enthalpies of Liquid Cu-Sn-Te Alloys." International Journal of Materials Research 85, no. 5 (May 1, 1994): 354–59. http://dx.doi.org/10.1515/ijmr-1994-850513.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Abdel-Rahim, M. A., A. Gaber, A. A. Abu-Sehly, and N. M. Abdelazim. "Crystallization study of Sn additive Se–Te chalcogenide alloys." Thermochimica Acta 566 (August 2013): 274–80. http://dx.doi.org/10.1016/j.tca.2013.06.009.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Tsuchiya, Yoshimi, and Toshikatsu Takahashi. "The Sound Velocity in the Liquid Sn–Te Alloys." Journal of the Physical Society of Japan 58, no. 11 (November 15, 1989): 4012–18. http://dx.doi.org/10.1143/jpsj.58.4012.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
11

Gelbstein, Y., O. Ben-Yehuda, E. Pinhas, T. Edrei, Y. Sadia, Z. Dashevsky, and M. P. Dariel. "Thermoelectric Properties of (Pb,Sn,Ge)Te-Based Alloys." Journal of Electronic Materials 38, no. 7 (January 21, 2009): 1478–82. http://dx.doi.org/10.1007/s11664-008-0652-8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
12

Patial, Balbir Singh, Nagesh Thakur, and S. K. Tripathi. "Crystallization study of Sn additive Se–Te chalcogenide alloys." Journal of Thermal Analysis and Calorimetry 106, no. 3 (May 1, 2011): 845–52. http://dx.doi.org/10.1007/s10973-011-1579-5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
13

Gather, B., E. Irle, and R. Blachnik. "The excess enthalpies of liquid GaGeTe and GaSnTe alloys." Journal of the Less Common Metals 136, no. 1 (December 1987): 183–91. http://dx.doi.org/10.1016/0022-5088(87)90023-3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
14

Heera, Pawan, Anup Kumar, and Raman Sharma. "Crystallization kinetics of tellurium-rich Se–Te–Sn glassy alloys." Journal of Thermal Analysis and Calorimetry 130, no. 2 (May 22, 2017): 661–69. http://dx.doi.org/10.1007/s10973-017-6442-x.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
15

Sharma, R. C., and Y. A. Chang. "The Sn−Te (Tin-Tellurium) system." Bulletin of Alloy Phase Diagrams 7, no. 1 (February 1986): 72–80. http://dx.doi.org/10.1007/bf02874985.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
16

Siol, Sebastian, Aaron Holder, Brenden R. Ortiz, Philip A. Parilla, Eric Toberer, Stephan Lany, and Andriy Zakutayev. "Solubility limits in quaternary SnTe-based alloys." RSC Advances 7, no. 40 (2017): 24747–53. http://dx.doi.org/10.1039/c6ra28219a.

Повний текст джерела
Анотація:
A combined theoretical and experimental approach was used to determine the equilibrium as well as non-equilibrium solubility lines in the quaternary Sn1−yMnyTe1−xSex alloy space, revealing a large area of accessible metastable phase space.
Стилі APA, Harvard, Vancouver, ISO та ін.
17

Guo, Xing Long. "Making Thermoelectric Materials SnxGa1−xNx Alloys by Magnetron Sputtering Technology." Advanced Materials Research 1120-1121 (July 2015): 490–92. http://dx.doi.org/10.4028/www.scientific.net/amr.1120-1121.490.

Повний текст джерела
Анотація:
Thermoelectric materials are of interest for applications as heat pumps and power generators. Thermoelectric properties of SnxGa1−xN alloys have been investigated. It was found that as Sn concentration increases, the thermal conductivity decreases and power factor increases, which leads to an increase in the TE figure of ZT. The valuge of ZT was found to be 0.07 at 300 K for Sn0.38Ga0.64N alloy. The results indicate that SnGaN alloys could be potentially important TE materials for many applications, especially for prolonged TE device operation at high temperatures, such as for recovery of waste heat from automobile, aircrafts, and power plants due to their superior physical properties, including the ability of operating at high temperature/high power conditions, high mechanical strength and stability, and radiation hardness.
Стилі APA, Harvard, Vancouver, ISO та ін.
18

NEUMANN, H., W. HOYER, and M. WOBST. "ChemInform Abstract: Neutron and X-Ray Scattering on Liquid Eutectic Ge-Te, Sn-Te and Pb-Te Alloys." ChemInform 22, no. 48 (August 22, 2010): no. http://dx.doi.org/10.1002/chin.199148004.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
19

Shi, Haizhou, Xinkai Shen, Hui Yang, Yawen Zhang, Yinqi Chen, Yuting Chen, Tianxiang Xu, and Guoxiang Wang. "Investigation of thermoelectric properties in binary Sb-Te and Sn-Te alloys during crystallization process." Journal of Non-Crystalline Solids 562 (June 2021): 120767. http://dx.doi.org/10.1016/j.jnoncrysol.2021.120767.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
20

Knura, Rafal, Taras Parashchuk, Akira Yoshiasa, and Krzysztof T. Wojciechowski. "Origins of low lattice thermal conductivity of Pb1−xSnxTe alloys for thermoelectric applications." Dalton Transactions 50, no. 12 (2021): 4323–34. http://dx.doi.org/10.1039/d0dt04206d.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
21

Zhan, Yongzhong, Jianbo Ma, Guanghua Zhang, Zhaohua Hu, and Chunhui Li. "Phase equilibria of Gd–Sn–Te system at Te rich corner." Journal of Alloys and Compounds 475, no. 1-2 (May 2009): 281–85. http://dx.doi.org/10.1016/j.jallcom.2008.08.015.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
22

Abdelazim, Nema M., M. A. Dabban, M. A. Abdel-Rahim, and A. A. Abu-Sehly. "Optical and other physical characteristics of amorphous Se–Te–Sn alloys." Materials Science in Semiconductor Processing 39 (November 2015): 156–61. http://dx.doi.org/10.1016/j.mssp.2015.05.005.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
23

Ben-Ayoun, Dana, Yatir Sadia, and Yaniv Gelbstein. "High temperature thermoelectric properties evolution of Pb1-Sn Te based alloys." Journal of Alloys and Compounds 722 (October 2017): 33–38. http://dx.doi.org/10.1016/j.jallcom.2017.06.075.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
24

Lee, Se Woong, Okmin Park, and Sang-il Kim. "Enhanced Thermoelectric Transport Properties of n -Type SnSe2 Polycrystalline Alloys by Te Doping." International Journal of Energy Research 2023 (June 1, 2023): 1–9. http://dx.doi.org/10.1155/2023/2900242.

Повний текст джерела
Анотація:
SnSe2, a layered posttransition metal chalcogenide, has attracted attention as a high-efficiency thermoelectric material owing to the intrinsic low thermal conductivity. Herein, a series of Sn S e 1 − x T e x 2 ( x = 0 , 0.025, 0.0375, 0.075, 0.1, and 0.125) samples was synthesized to examine the influence of Te doping on electrical, thermal, and thermoelectric properties of n -type SnSe2 alloys. Interestingly, carrier concentration and mobility were simultaneously increased for x = 0.025 and 0.0375. Therefore, electrical conductivity is increased for x = 0.025 and 0.0375 compared to that for the pristine sample, resulting in power factor increase to 0.25 mW/mK2 for x = 0.025 by 12% at 790 K. However, reductions in the electrical conductivity were observed for the samples with x > 0.0375 due to the decrease in carrier mobility for x > 0.0375 , resulting in the decrease of power factor. The lattice thermal conductivity slightly reduced for the doped samples owing to point defects of Te and vacancies originating from Te doping. Consequently, the thermoelectric figure of merit ( z T ) was increased to 0.45 and 0.49 for Sn(Se1.975Te0.025)2 ( x = 0.025 ) and Sn(Se1.9625Te0.0375)2 ( x = 0.0375 ) samples at 790 K, respectively, which was enhanced by 40% and 53% compared to that for undoped SnSe2. The enhanced electrical transport properties were validated by weighted mobility, density-of-state effective mass, and quality factor, and the reduction of the lattice thermal conductivity is analyzed by the Debye-Callaway model.
Стилі APA, Harvard, Vancouver, ISO та ін.
25

Li, S. M., J. Q. Li, L. Yang, F. S. Liu, W. Q. Ao, and Y. Li. "Phases and thermoelectric properties in stoichiometric Sn 1−x Mn x Te and non-stoichiometric Sn 1−y Mn 1.1y Te alloys." Materials & Design 108 (October 2016): 51–59. http://dx.doi.org/10.1016/j.matdes.2016.06.084.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
26

Soares, J., M. A. G. Nunes, E. M. M. Flores, J. N. G. Paniz, and V. L. Dressler. "Simultaneous determination of As, Bi, Sb, Se, Sn and Te in lead alloy using flow injection-hydride generation-inductively coupled plasma mass spectrometry." Analytical Methods 8, no. 37 (2016): 6805–14. http://dx.doi.org/10.1039/c6ay01726f.

Повний текст джерела
Анотація:
A method based on flow injection-hydride generation-inductively coupled plasma mass spectrometry (FI-HG-ICP-MS) for the determination of trace amounts of As, Bi, Sb, Se, Sn and Te in lead alloys was developed.
Стилі APA, Harvard, Vancouver, ISO та ін.
27

Wang, Xiaotian, Mengxin Wu, Tie Yang, and Rabah Khenata. "Effect of Zn doping on phase transition and electronic structures of Heusler-type Pd2Cr-based alloys: from normal to all-d-metal Heusler." RSC Advances 10, no. 30 (2020): 17829–35. http://dx.doi.org/10.1039/d0ra02951c.

Повний текст джерела
Анотація:
By first-principles calculations, for Heusler alloys Pd2CrZ (Z = Al, Ga, In, Tl, Si, Sn, P, As, Sb, Bi, Se, Te, Zn), the effect of Zn doping on their phase transition and electronic structure has been studied in this work.
Стилі APA, Harvard, Vancouver, ISO та ін.
28

Shtanov, V. I., O. V. Zatolochnaya, K. Yu Veremeev, M. E. Tamm, and O. E. Timofeeva. "A contribution to the phase diagram of the system Ge–Sn–Te and the conditions of (Sn,Ge)Te crystal growth." Journal of Alloys and Compounds 476, no. 1-2 (May 2009): 812–16. http://dx.doi.org/10.1016/j.jallcom.2008.09.119.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
29

Yashina, Lada, and Volkmar Leute. "The phase diagrams of the quasibinary systems (Pb,Ge)Te and (Ge,Sn)Te." Journal of Alloys and Compounds 313, no. 1-2 (December 2000): 85–92. http://dx.doi.org/10.1016/s0925-8388(00)01172-5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
30

Yuan, Xiao-Juan, Jian-Zhe Liu, Feng Ning, Yong Zhang, and Li-Ming Tang. "Band Alignment for Ambipolar-Doping of Sn x Zn 1− x Te Alloys." Communications in Theoretical Physics 57, no. 4 (April 2012): 723–26. http://dx.doi.org/10.1088/0253-6102/57/4/28.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
31

Aramanda, Shanmukha Kiran, Sai Kiran Salapaka, Sumeet Khanna, Kamanio Chattopadhyay, and Abhik Choudhury. "Exotic colony formation in Sn-Te eutectic system." Acta Materialia 197 (September 2020): 108–21. http://dx.doi.org/10.1016/j.actamat.2020.07.036.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
32

Chorba, O. J., M. J. Filep, A. I. Pogodin, T. O. Malakhovska, and M. Yu Sabov. "TRIANGULATION OF THE Cu-Sn-Se SYSTEM." Scientific Bulletin of the Uzhhorod University. Series «Chemistry» 46, no. 2 (February 10, 2022): 22–27. http://dx.doi.org/10.24144/2414-0260.2021.2.22-27.

Повний текст джерела
Анотація:
Copper-containing compounds exhibit a wide range of properties, including thermoelectric, photoelectric, optical magnetic, superionic, superconducting, etc., which determines the areas of their practical use. In recent years, studies of complex copper selenides as promising thermoelectric (TE) materials have been actively carried out due to their advantages over traditional TE materials. Like binary Cu2Se, ternary selenides have low phonon thermal conductivity and high electrical conductivity and thermoelectric quality factor. Typically, copper-containing compounds belong to the p-type conductors and crystallize in four main structural types, among which phases with a diamond-like structure should be distinguished. Data on the nature of physicochemical interaction in the Cu – Sn – Se system are limited and contradictory. In view of this, it is important to carry out the triangulation of the ternary system Cu–Sn–Se, which is the first stage of the study of multicomponent systems. The investigated alloys of the Cu – Sn – Se system were obtained by fusing elementary components of high purity in vacuum quartz ampoules. The obtained alloys were investigated using X-ray powder diffraction (XRD) and differential thermal (DTA) analyzes. At the temperature of homogenizing annealing (170 ° С) there are seven binary Cu2Se, CuSe, CuSe2, Cu6Sn5, Cu3Sn, SnSe, SnSe2 and one ternary phase Cu2SnSe3 stable in the Cu – Sn – Se ternary system. The existence of the ternary phase of Cu2SnSe4 has not been confirmed, because the alloy corresponding to its stoichiometric composition is a mixture of Cu2SnSe3 and Se. To establish quasibinary sections of the Cu – Sn – Se system were performed the synthesis and phase analysis of only the significant points in the most informative areas. This ensures the establishment of the nature of the maximum number of quasibinary sections with a minimum number of syntheses. According to the results of phase analysis in combination with the literature data the triangulation of the Cu – Sn – Se system was carried out at 170 ° С. The quasibinarity of the Cu2Se – SnSe, Cu2Se – SnSe2, Cu2SnSe3 – Se, Cu2SnSe3 – SnSe, Cu6Sn5 – SnSe, Cu3Sn – SnSe, and Cu3Sn – Cu2Se sections was confirmed, and the quasibinarity of the Cu3Sn – Cu2Se was established at first. Keywords: triangulation; quasibinary section; phase analysis.
Стилі APA, Harvard, Vancouver, ISO та ін.
33

Pal, Shiv Kumar, Neeraj Mehta, and A. Dahshan. "Signature Of stiffness transition in electrical behaviour of Se-Te-Sn-Ge glassy alloys." Philosophical Magazine 101, no. 23 (October 6, 2021): 2528–40. http://dx.doi.org/10.1080/14786435.2021.1984604.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
34

Rao, Vandita, N. Mehta, Amit Kumar, and D. K. Dwivedi. "Effect of Sb incorporation on thermo-mechanical properties of amorphous Se-Te-Sn alloys." Materials Research Express 5, no. 6 (June 20, 2018): 065206. http://dx.doi.org/10.1088/2053-1591/aac99e.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
35

Gelbstein, Yaniv, Ohad Ben-Yehuda, Zinovy Dashevsky, and Moshe P. Dariel. "Phase transitions of p-type (Pb,Sn,Ge)Te-based alloys for thermoelectric applications." Journal of Crystal Growth 311, no. 18 (September 2009): 4289–92. http://dx.doi.org/10.1016/j.jcrysgro.2009.07.018.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
36

Kumar, Rajneesh, Pankaj Sharma, P. B. Barman, Vineet Sharma, S. C. Katyal, and V. S. Rangra. "Thermal stability and crystallization kinetics of Se–Te–Sn alloys using differential scanning calorimetry." Journal of Thermal Analysis and Calorimetry 110, no. 3 (November 25, 2011): 1053–60. http://dx.doi.org/10.1007/s10973-011-2062-z.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
37

Parasyuk, O. V. "Phase relations of the Ag2SnS3–HgS and Ag33.3Sn16.7Se/Te/50–HgSe/Te/ section in Ag–Hg–Sn–S/Se,Te/ systems." Journal of Alloys and Compounds 291, no. 1-2 (September 1999): 215–19. http://dx.doi.org/10.1016/s0925-8388(99)00288-1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
38

Mallik, Ramesh Chandra. "Transport Properties of Sn-Filled and Te-Doped CoSb3 Skutterudites." Metals and Materials International 14, no. 5 (October 23, 2008): 615–20. http://dx.doi.org/10.3365/met.mat.2008.10.615.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
39

Cui, Jiaxin, Cuiping Guo, Lei Zou, Changrong Li, and Zhenmin Du. "Experimental investigation and thermodynamic modeling of the Se–Sn–Te system." Journal of Alloys and Compounds 642 (September 2015): 153–65. http://dx.doi.org/10.1016/j.jallcom.2015.04.049.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
40

Sukhomlinov, Dmitry, Lassi Klemettinen, Hugh O’Brien, Pekka Taskinen, and Ari Jokilaakso. "Behavior of Ga, In, Sn, and Te in Copper Matte Smelting." Metallurgical and Materials Transactions B 50, no. 6 (September 23, 2019): 2723–32. http://dx.doi.org/10.1007/s11663-019-01693-y.

Повний текст джерела
Анотація:
Abstract The distributions of Ga, In, Sn, and Te between copper-iron mattes and silica-saturated iron silicate slags over a wide range of matte grades 55 to 75 pct Cu were determined at 1300 °C using a gas-phase equilibration-quenching technique and direct phase composition analysis by Electron Probe X-ray Microanalysis and Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry. Alumina from aluminum, a typical minor element of electric and electronic copper scrap, and lime were adopted as slag modifiers for increasing the trace element recoveries. Gallium and tin were distributed predominantly in the slag, indium preferred sulfide matte at low matte grades and slag at high, whereas tellurium strongly favored the sulfide matte in particular in high matte grades. The slag modifiers alumina and lime had a minor impact on the distribution coefficients of gallium and tin, but for indium and tellurium the distribution coefficients were more strongly affected by the basic oxides. The strong tendencies of tin and tellurium to vaporize at the experimental temperature were confirmed.
Стилі APA, Harvard, Vancouver, ISO та ін.
41

Lee, Jae-Uk, Deuk-Hee Lee, Beomjin Kwon, Dow-Bin Hyun, Sahn Nahm, Seung-Hyub Baek, and Jin-Sang Kim. "Effect of Sn Doping on the Thermoelectric Properties of n-type Bi2(Te,Se)3 Alloys." Journal of Electronic Materials 44, no. 6 (January 8, 2015): 1926–30. http://dx.doi.org/10.1007/s11664-014-3598-z.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
42

Born, Th. "Calculation of the Electrical Resistivity of Liquid Sn-Te Alloys according to the Effective-Medium Theory." physica status solidi (b) 151, no. 1 (January 1, 1989): K41—K44. http://dx.doi.org/10.1002/pssb.2221510151.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
43

Kattner, Ursula, Hans Leo Lukas, Günter Petzow, Bernd Gather, Eberhard Irle, and Roger Blachnik. "Excess Enthalpy Measurements and Thermodynamic Evaluation of the Sn-Pb-Te System." International Journal of Materials Research 79, no. 1 (January 1, 1988): 32–40. http://dx.doi.org/10.1515/ijmr-1988-790106.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
44

Selivanov, Yu G., E. G. Chizhevskii, V. P. Martovitskiy, A. V. Knotko, and I. I. Zasavitskii. "Molecular beam epitaxy of Pb1 − x Eu x Te and Pb1 − x Sn x Te layers and related periodic structures." Inorganic Materials 46, no. 10 (October 2010): 1065–71. http://dx.doi.org/10.1134/s0020168510100079.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
45

Kumar, Rajneesh, Parikshit Sharma, S. C. Katyal, Pankaj Sharma, and V. S. Rangra. "A study of Sn addition on bonding arrangement of Se-Te alloys using far infrared transmission spectroscopy." Journal of Applied Physics 110, no. 1 (July 2011): 013505. http://dx.doi.org/10.1063/1.3603010.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
46

Jang, Jai-young, Su-jin Chun, Nam-suk Kim, Jeung-won Cho, Jae-hyun Kim, Jong-taek Yeom, Jae-il Kim, and Tae-hyun Nam. "Martensitic transformation behavior in Ti–Ni–X (Ag, In, Sn, Sb, Te, Tl, Pb, Bi) ternary alloys." Materials Research Bulletin 48, no. 12 (December 2013): 5064–69. http://dx.doi.org/10.1016/j.materresbull.2013.05.004.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
47

Ansari, Rafiullah, and Horesh Kumar. "Calorimetric study of crystallization kinetics in ternary alloys of Se–Te–Sn glasses using iso-conversional approach." Boletín de la Sociedad Española de Cerámica y Vidrio 59, no. 6 (November 2020): 267–72. http://dx.doi.org/10.1016/j.bsecv.2020.01.002.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
48

Zhang, Guanghua, Yongzhong Zhan, Zhulin Yang, Zhaohua Hu, Xinjiang Zhang, and Jianbo Ma. "Experimental partial phase relationships of the Dy–Sn–Te system at room temperature." Journal of Alloys and Compounds 485, no. 1-2 (October 2009): 192–95. http://dx.doi.org/10.1016/j.jallcom.2009.05.143.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
49

Zhang, Guanghua, Yongzhong Zhan, Fusheng Luo, Jianlie Liang, Xianxiang Li, Weiping Zhou, and Qiannan Gao. "Solid state phase equilibria in the Te-rich region of the RE (RE=Ce, Nd and Pr)–Sn–Te ternary systems." Journal of Alloys and Compounds 491, no. 1-2 (February 2010): 182–86. http://dx.doi.org/10.1016/j.jallcom.2009.11.010.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
50

Gelbstein, Y., Z. Dashevsky, R. Kreizman, Y. George, M. Gelbstein, and M. P. Dariel. "Annealing Effects on Powder Metallurgy Based Pb1-xSnxTe Materials for Thermoelectric Applications." Key Engineering Materials 336-338 (April 2007): 860–63. http://dx.doi.org/10.4028/www.scientific.net/kem.336-338.860.

Повний текст джерела
Анотація:
Lead tin telluride based alloys are known p-type materials for thermoelectric applications, in the 50-600oC temperature range. These alloys combine desired features of mechanical and thermoelectric properties. The electronic transport properties of PbTe and Pb1-xSnxTe materials may be strongly dependent on the preparation technique. Powder metallurgy process is known to introduce defects and strains, that may alter carrier concentration. Under such non-equilibrium conditions the thermoelectric properties are instable at the operating temperature. An appropriate annealing treatment can eliminate this effect.. The present communication describes the annealing treatment applied to cold compacted and sintered Pb1-xSnxTe materials.
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії