Добірка наукової літератури з теми "Sn-Te alloys"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Sn-Te alloys".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Sn-Te alloys"
Kumar, Bhupendra, Manas Paliwal, Chandra Sekhar Tiwary, and Min-Kyu Paek. "Thermodynamic Optimization of the Ternary Ga-Sn-Te System Using Modified Quasichemical Model." Metals 11, no. 9 (August 30, 2021): 1363. http://dx.doi.org/10.3390/met11091363.
Повний текст джерелаLiao, Chien-Neng, and Ching-Hua Lee. "Suppression of vigorous liquid Sn/Te reactions by Sn–Cu solder alloys." Journal of Materials Research 23, no. 12 (December 2008): 3303–8. http://dx.doi.org/10.1557/jmr.2008.0409.
Повний текст джерелаHalm, Th, W. Hinz, and W. Hoyer. "Neutron scattering on molten Ge-Sn-Te alloys." Physica Scripta T57 (January 1, 1995): 33–35. http://dx.doi.org/10.1088/0031-8949/1995/t57/006.
Повний текст джерелаGelbstein, Yaniv. "Pb1−x Sn x Te Alloys: Application Considerations." Journal of Electronic Materials 40, no. 5 (December 8, 2010): 533–36. http://dx.doi.org/10.1007/s11664-010-1435-6.
Повний текст джерелаRashad, M., R. Amin, and M. M. Hafiz. "Crystallization kinetics of glassy Se–Te–Sn alloys." Canadian Journal of Physics 93, no. 8 (August 2015): 898–904. http://dx.doi.org/10.1139/cjp-2014-0186.
Повний текст джерелаМарченко, А. В., П. П. Серегин, Е. И. Теруков та К. Б. Шахович. "Антиструктурные дефекты в полупроводниковых стеклах Ge-Te и Ge-As-Te". Физика и техника полупроводников 53, № 5 (2019): 718. http://dx.doi.org/10.21883/ftp.2019.05.47570.9032.
Повний текст джерелаNeumann, Hartmut, Walter Hoyer, and Manfred Wobst. "Neutron and X-ray Scattering on Liquid Eutectic Ge-Te, Sn-Te and Pb-Te Alloys." Zeitschrift für Naturforschung A 46, no. 9 (September 1, 1991): 739–45. http://dx.doi.org/10.1515/zna-1991-0902.
Повний текст джерелаVenkatraman, Mahadevan, Andreas Schlieper, Roger Blachnik, and Bernd Gather. "The Excess Enthalpies of Liquid Cu-Sn-Te Alloys." International Journal of Materials Research 85, no. 5 (May 1, 1994): 354–59. http://dx.doi.org/10.1515/ijmr-1994-850513.
Повний текст джерелаAbdel-Rahim, M. A., A. Gaber, A. A. Abu-Sehly, and N. M. Abdelazim. "Crystallization study of Sn additive Se–Te chalcogenide alloys." Thermochimica Acta 566 (August 2013): 274–80. http://dx.doi.org/10.1016/j.tca.2013.06.009.
Повний текст джерелаTsuchiya, Yoshimi, and Toshikatsu Takahashi. "The Sound Velocity in the Liquid Sn–Te Alloys." Journal of the Physical Society of Japan 58, no. 11 (November 15, 1989): 4012–18. http://dx.doi.org/10.1143/jpsj.58.4012.
Повний текст джерелаДисертації з теми "Sn-Te alloys"
Soares, Jocelene. "Determinação de As, Bi, Sb, Se, Sn e Te por injeção em fluxo com geração de hidretos acoplada a espectrometria de massa com plasma indutivamente acoplado." Universidade Federal de Santa Maria, 2010. http://repositorio.ufsm.br/handle/1/10480.
Повний текст джерелаIn this work it is proposed the development of flow injection systems for hydride generation coupled to inductively coupled plasma mass spectrometry (FI-HG-ICPMS) for determination of trace elements (As, Bi, Sb, Se, Sn and Te) in lead alloys employed in automotive battery. Due to the characteristics of the sample matrix, manly the presence of high concentrations of lead that can interfere in hydride generation technique, a detailed investigation of the influence of the physical and chemical parameters was made. The carrier solution concentration (HCl) reductant concentration (NaBH4 solution), reaction coil length and sample volume were evaluated. As the ICP-MS is a multielmentar technique, the parameters were optimized in order to determine simultaneously the highest number of elements. Three different configurations of FI systems were tested: a) a single channel system; b) a two channel system with one gas/liquid separator; and, c) a two channel system with two gas/liquid separators. According to the characteristics of the elements, two groups were separated: one group containing As, Bi, Se and Te were 6.0 mol l-1 HCl is necessary as sample carrier solution and another group containing Sb and Sn were 0.1 mol l-1 HCl is used as sample carrier. The compromise conditions of NaBH4 concentration, carrier gas (Ar) flow rate, sample volume and reactor coil length were 0.6% (m/v), 1.25 L min-1, 87 μL and 50 cm, respectively, for both groups of elements. Both systems with two reaction channels allow the simultaneous determination of the two groups of elements. Strong analyte signal suppression in presence of Pb, Ag, Bi and Cu was observed. However, the interference could be overcome by using the optimized conditions for hydride generation. By using the proposed FI-HG-ICP-MS systems it was possible to determine relatively low concentrations of Bi, Sb, Se, Sn and Te in lead alloys. The limits of detection were 0.34, 0.01, 0.01, 0.01, 0.01, 0.01 mg g-1 of As, Bi, Sb, Se, Sn and Te, respectively. The accuracy of the developed method was evaluated by using analyte recovery tests where the results were in range 94 to 103%.
Neste trabalho foram desenvolvidos sistemas de injeção em fluxo (FI) para a geração de hidretos (HG) acoplados a espectrometria de massa com plasma indutivamente acoplado (FI-HG-ICP-MS), para a determinação de elementos traço em liga de chumbo empregada em baterias automotivas. Devido às características da matriz da amostra, principalmente devido a presença de Pb, foi feita uma investigação detalhada dos parâmetros físicos e químicos da HG como, a concentração da solução carregadora (HCl), concentração do redutor, comprimento do reator e o volume de amostra injetado. Para a eficiente geração dos hidretos voláteis foi necessário estabelecer uma condição de compromisso. Desta forma, para As, Bi, Se e Te foi usada como solução carregadora da amostra HCl 6,0 mol L-1 e HCl 0,1 mol L-1 para Sb e Sn. A concentração de NaBH4, vazão do gás de arraste (Ar), volume de amostra injetado e o comprimento do reator foram 0,6% (m/v), 1,25 L min-1, 87 μL e 50 cm, respectivamente, para ambos os grupos de elementos. Após estabelecidas as condições reacionais para a geração de hidretos, foram desenvolvidos três sistemas FI. Um sistema FI com um canal de reação e dois sistemas com dois canais de reação, com um e dois separadores gás-líquido. Os sistemas com dois canais de reação permitem a determinação simultânea dos dois grupos de elementos. Forte supressão de sinal foi observada na presença de Pb, Ag, Bi e Cu porém, estas foram contornadas, particularmente, pelas condições reacionais da geração de hidretos e o reduzido volume de amostra injetado. Desta forma, utilizando os sistemas propostos foi possível a determinação de concentrações relativamente baixas para Bi, Sb, Se, Sn e Te em amostras de liga de chumbo. Os limites de detecção obtidos foram de 0,34, 0,01, 0,01, 0,01, 0,01, 0,01 mg g-1 para As, Bi, Sb, Se, Sn e Te, respectivamente. A exatidão do método proposto foi avaliada através de teste de recuperação dos analitos, sendo que os mesmos ficaram na faixa entre 94 e 103%.
邱國峻. "Phase equilibria and liquidus projection of thermoelectric Ag-Sn-Te alloys." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/91584058465062117914.
Повний текст джерела陳崇益. "Phase equilibria and liquidus projection of thermoelectric Sn-Se-Te alloys." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/13001245057951558473.
Повний текст джерелаSireesha, Panithi. "Investigation of thermoelectric properties of Sn-Te based alloys with microstructural studies." Thesis, 2021. https://etd.iisc.ac.in/handle/2005/5647.
Повний текст джерелаKiran, Aramanda Shanmukha. "Exotic eutectic microstructures." Thesis, 2021. https://etd.iisc.ac.in/handle/2005/5476.
Повний текст джерелаЧастини книг з теми "Sn-Te alloys"
Predel, F. "Thermodynamic properties of Sn-Te (tin-tellurium) system." In Phase Equilibria, Crystallographic and Thermodynamic Data of Binary Alloys, 248–49. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-642-24977-8_152.
Повний текст джерелаТези доповідей конференцій з теми "Sn-Te alloys"
FONTANA, M., B. ARCONDO, M. T. CLAVAGUERA-MORA, and N. CLAVAGUERA. "CRYSTALLIZATION OF AMORPHOUS Ga-Te-Sn ALLOYS." In Proceedings of the Fifth International Workshop on Non-Crystalline Solids. WORLD SCIENTIFIC, 1998. http://dx.doi.org/10.1142/9789814447225_0050.
Повний текст джерелаHeera, Pawan, and Raman Sharma. "Effect of Sn on the dielectric properties of Te rich Se-Te glassy alloys." In SOLID STATE PHYSICS: Proceedings of the 58th DAE Solid State Physics Symposium 2013. AIP Publishing LLC, 2014. http://dx.doi.org/10.1063/1.4872764.
Повний текст джерелаPatial, Balbir Singh, Nagesh Thakur, and S. K. Tripathi. "Kinetics of amorphous-crystallization transformation of Se[sub 85−x]Te[sub 15]Sn[sub x] (x = 2, 4 and 6) alloys under non-isothermal conditions using Matusita's approach." In SOLID STATE PHYSICS: PROCEEDINGS OF THE 57TH DAE SOLID STATE PHYSICS SYMPOSIUM 2012. AIP, 2013. http://dx.doi.org/10.1063/1.4791151.
Повний текст джерелаPatial, Balbir Singh, Nagesh Thakur, S. K. Tripathi, S. K. Tripathi, Keya Dharamvir, Ranjan Kumar, and G. S. S. Saini. "Iso-conversional Analysis of Amorphous-Crystalline Transformation of Se[sub 75]Te[sub 15]Sn[sub 10] Glassy Alloy." In INTERNATIONAL CONFERENCE ON ADVANCES IN CONDENSED AND NANO MATERIALS (ICACNM-2011). AIP, 2011. http://dx.doi.org/10.1063/1.3653626.
Повний текст джерела