Готові списки джерел за темами / Sliced cone

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Sliced cone"

Автор: Grafiati

Опубліковано: 10 грудня 2022

Оновлено: 28 січня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Sliced cone".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Sliced cone"

Luo, Hongliang, Yu Jin, Keiya Nishida, Youichi Ogata, Jing Yao, and Run Chen. "Microscopic characteristics of impinging spray sliced by a cone structure under increased injection pressures." Fuel 284 (January 2021): 119033. http://dx.doi.org/10.1016/j.fuel.2020.119033.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sulistyorini, Yunis. "GESTUR DALAM PEMBELAJARAN MATEMATIKA MATERI IRISAN KERUCUT DAN KOORDINAT POLAR." SUPERMAT (JURNAL PENDIDIKAN MATEMATIKA) 3, no. 1 (July 29, 2019): 1–9. http://dx.doi.org/10.33627/sm.v3i1.147.

Повний текст джерела

Анотація:

Gestures played a role in the learning of mathematics, especially in the Sliced Cone and Polar Coordinates material. Educators gestures associated with conceptual planning of the explanations and is the embodiment of knowledge and understanding of educators associated with the material being studied. The educators’ gestures were pointing gestures, representations and writing. Gestures appeared at the planning stage, especially the activities of peer teaching and learning implementation. Both of two steps related to the implementation of lesson study in math learning. Gestures accompanied explanations educators help to clarify, explain, and emphasize mathematical concepts in the material being studied.

Стилі APA, Harvard, Vancouver, ISO та ін.

Ho, Hsing-Hao, Ya-Hui Li, Jih-Chin Lee, Chih-Wei Wang, Yi-Lin Yu, Dueng-Yuan Hueng, Hsin-I. Ma, Hsian-He Hsu, and Chun-Jung Juan. "Vestibular schwannomas: Accuracy of tumor volume estimated by ice cream cone formula using thin-sliced MR images." PLOS ONE 13, no. 2 (February 13, 2018): e0192411. http://dx.doi.org/10.1371/journal.pone.0192411.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Shankar, Shreya, Stephen Macke, Sarah Chasins, Andrew Head, and Aditya Parameswaran. "Bolt-on, Compact, and Rapid Program Slicing for Notebooks." Proceedings of the VLDB Endowment 15, no. 13 (September 2022): 4038–47. http://dx.doi.org/10.14778/3565838.3565855.

Повний текст джерела

Анотація:

Computational notebooks are commonly used for iterative workflows, such as in exploratory data analysis. This process lends itself to the accumulation of old code and hidden state, making it hard for users to reason about the lineage of, e.g., plots depicting insights or trained machine learning models. One way to reason about code used to generate various notebook data artifacts is to compute a program slice , but traditional static approaches to slicing can be both inaccurate (failing to contain relevant code for artifacts) and conservative (containing unnecessary code for an artifacts). We present nbslicer, a dynamic slicer optimized for the notebook setting whose instrumentation for resolving dynamic data dependencies is both bolt-on (and therefore portable) and switchable (allowing it to be selectively disabled in order to reduce instrumentation overhead). We demonstrate Nbslicer's ability to construct small and accurate backward slices (i.e., historical cell dependencies) and forward slices (i.e., cells affected by the "rerun" of an earlier cell), thereby improving reproducibility in notebooks and enabling faster reactive re-execution, respectively. Comparing nbslicer with a static slicer on 374 real notebook sessions, we found that nbslicer filters out far more superfluous program statements while maintaining slice correctness, giving slices that are, on average, 66% and 54% smaller for backward and forward slices, respectively.

Стилі APA, Harvard, Vancouver, ISO та ін.

Liang, Jiahao, Ziyang Hu, Dantong Cao, Ya Cao, Xin Xie, Antian Gao, Zhiyong Wang, and Zitong Lin. "Establishment of Narrow Root Fracture Models Using Modified Temperature Cycling Method and Diagnosis Using Different Cone-Beam CT Units." Scanning 2022 (July 14, 2022): 1–7. http://dx.doi.org/10.1155/2022/3636795.

Повний текст джерела

Анотація:

Aim. Using a modified thermal cycling method to establish narrow root fracture models and evaluate the diagnosis efficiency of them using four different cone-beam CT (CBCT) units. Methodology. Fifty-six intact teeth were selected, and the crowns of the teeth were embedded using general purpose acrylic resin. 50 root fracture models were established by soaking these teeth in liquid nitrogen and hot water cyclically; 6 teeth were used as the negative control. All the 56 teeth were scanned with the smallest voxel size of four different CBCT units (NewTom VGi, Planmeca Promax 3D Max, Kavo 3D eXam, and Soredex Scanora3D). 10 teeth were randomly selected, and the roots were sliced using slow-speed saw to obtain horizontal root sections. Scanning electron microscope (SEM) was used to measure the width of the fracture lines (FLs). The CBCT images were evaluated for the presence or absence of fracture lines. Accuracy, sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) were calculated for the diagnosis of FLs using the four CBCT units. Results. Fifty narrow root fracture models were successfully established, and 25 root sections with 45 FLs were acquired. The width of FLs was from 3.43 μm to 143 μm; 32.2% of the points had width under 25 μm, while only 9.6% of them had width over 75 μm. The accuracy was 0.41, 0.54, 0.41, and 0.30 for NewTom VGi, Planmeca Promax 3D Max, Kavo 3D eXam, and Soredex Scanora3D, respectively. Conclusions. The modified temperature cycling method is a simple and effective method to establish narrow root fracture models, and the diagnosis efficiency for these narrow fracture lines was quite poor using all the four different CBCT units.

Стилі APA, Harvard, Vancouver, ISO та ін.

Nayak, Ankit, Prashant K. Jain, PK Kankar, and Niharika Jain. "Computer-aided design–based guided endodontic: A novel approach for root canal access cavity preparation." Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 232, no. 8 (July 17, 2018): 787–95. http://dx.doi.org/10.1177/0954411918788104.

Повний текст джерела

Анотація:

In cases of teeth with unusual morphology like calcified pulp canal, guided endodontic treatment is suggested. An endodontic guide which navigates burs according to a preplanned path is used. Existing approaches of endodontic guide design are based on visual observation and analysis of tomographic scan of teeth. Hence, they are time-consuming and expert-dependent. Computer-aided design–based methodology was employed to design and fabricate a customized endodontic guide. A cone beam computed tomographic scan with MIMICS software was used to create a solid model of the teeth. The solid model generated was sliced through the developed program in MATLAB. The geometric centers of consecutive slices were joined to plot the root canals central axis. To gauge the optimum bur angulation for guide design, a straight line fitted in the data set of the geometric center helped create minimally invasive access. Methodology involved simulated verification of the drill path to judge the accuracy and feasibility of root canal access cavity preparation. Next, endodontic guides for extracted teeth were designed and fabricated using a three-dimensional printer, followed by guided root canal access cavity preparation for extracted teeth. To validate the proposed methodology, using a MATLAB image processing tool box, the deviation between the prepared root canal access cavity axis and root canal axis was analyzed in radiographs of post-treated teeth. The deviation between the tool path axis and root canal axis in simulated root canals was found to be not more than 0.210 ± 0.04 mm. The deviation between the axis of the planned root canal access cavity and the prepared root canal access cavity was 0.07 ± 0.02 mm. The proposed method reveals encouraging results for endodontic guide design.

Стилі APA, Harvard, Vancouver, ISO та ін.

Hasegawa, Masumi, Hiroyuki Okamura, and Yasushi Hano. "Nondestructive prediction of fire performance in fire retardant-treated wood using x-ray computed tomography." BioResources 17, no. 4 (October 2022): 6900–6909. http://dx.doi.org/10.15376/biores.17.4.6900-6909.

Повний текст джерела

Анотація:

The fire performance of fire retardant-treated wood can be evaluated based on how much of the chemical retardant is used. Therefore, methods for identifying chemical content in wood are needed. Stereo images of wood samples before and after the fire retardant treatment were captured using micro-focus X-ray computed tomography. Image brightness values, indicating concentration, were calculated using binarized images sliced from the X-ray images. Changes in integrated brightness values before and after treatment showed a strong positive correlation with chemical content at a 1% significance level. The chemical content of the retardant-treated wood was predicted based on the relationship between the two. The predicted values were in agreement with the values measured using the leaching method. Fire performance tests of the fire retardant-treated wood were conducted using a cone calorimeter. The treated wood was classified as fire-retardant and non-combustible wood. In addition, the fire performance predicted by the relationship between changes in integrated brightness values and chemical content agreed with the classification by the fire performance test. These findings suggest that X-ray computed tomography can be potentially used to predict the chemical content of fire retardant-treated wood.

Стилі APA, Harvard, Vancouver, ISO та ін.

LIPCSEI, LAUREN E., LAURA G. BROWN, E. RICKAMER HOOVER, BRENDA V. FAW, NICOLE HEDEEN, BAILEY MATIS, DAVID NICHOLAS, and DANNY RIPLEY. "Retail Deli Slicer Inspection Practices: An EHS-Net Study." Journal of Food Protection 81, no. 5 (April 11, 2018): 799–805. http://dx.doi.org/10.4315/0362-028x.jfp-17-407.

Повний текст джерела

Анотація:

ABSTRACT The Centers for Disease Control and Prevention (CDC) estimates that 3,000 people die in the United States each year from foodborne illness, and Listeria monocytogenes causes the third highest number of deaths. Risk assessment data indicate that L. monocytogenes contamination of particularly delicatessen meats sliced at retail is a significant contributor to human listeriosis. Mechanical deli slicers are a major source of L. monocytogenes cross-contamination and growth. In an attempt to prevent pathogen cross-contamination and growth, the U.S. Food and Drug Administration (FDA) created guidance to promote good slicer cleaning and inspection practices. The CDC's Environmental Health Specialists Network conducted a study to learn more about retail deli practices concerning these prevention strategies. The present article includes data from this study on the frequency with which retail delis met the FDA recommendation that slicers should be inspected each time they are properly cleaned (defined as disassembling, cleaning, and sanitizing the slicer every 4 h). Data from food worker interviews in 197 randomly selected delis indicate that only 26.9% of workers (n = 53) cleaned and inspected their slicers at this frequency. Chain delis and delis that serve more than 300 customers on their busiest day were more likely to have properly cleaned and inspected slicers. Data also were collected on the frequency with which delis met the FDA Food Code provision that slicers should be undamaged. Data from observations of 685 slicers in 298 delis indicate that only 37.9% of delis (n = 113) had slicers that were undamaged. Chain delis and delis that provide worker training were more likely to have slicers with no damage. To improve slicer practices, food safety programs and the retail food industry may wish to focus on worker training and to focus interventions on independent and smaller delis, given that these delis were less likely to properly inspect their slicers and to have undamaged slicers.

Стилі APA, Harvard, Vancouver, ISO та ін.

Ueng, Shyh-Kuang, Hsuan-Kai Huang, and Hsin-Cheng Huang. "A G-Code Generator for Volumetric Models." Applied Sciences 9, no. 18 (September 15, 2019): 3868. http://dx.doi.org/10.3390/app9183868.

Повний текст джерела

Анотація:

In layered manufacturing (LM), slicers are employed to convert input geometric models into G-codes. Conventional slicers accept only surface models as input data. Thus, volumetric models have to be converted into polygonal representations to fit the data format of the slicers. This results in extra computational costs and geometric errors. In this article, we present an efficient slicer aiming to generate G-codes for volumetric models. At first, our slicer computes the printing direction by exploring the inertia tensor of the input model to enhance the stability of the printed part and to decrease the build time. Then, it detects and classifies overhangs in the input model and generates necessary support structures by using a pattern-based method. Thirdly, the proposed slicer divides the input model into the skin and internal regions and cuts the model into 2D images. Subsequently, these images are transformed into toolpaths by utilizing texture mapping and graph traversal methods. Finally, the resultant toolpaths are smoothed to reduce staircases and encoded into G-codes. Test results verify that the proposed slicer produces decent G-codes for volumetric models. Scanned objects hidden in volume data can be directly manufactured without generating intermediate polygonal representations. LM processes become more efficient.

Стилі APA, Harvard, Vancouver, ISO та ін.

Han, Yi, Chu Na Wu, and Kang Zhao. "Research on Multi-Thread Schedule Algorithm of the Adjusted Pressure Casting Control System." Advanced Materials Research 462 (February 2012): 246–51. http://dx.doi.org/10.4028/www.scientific.net/amr.462.246.

Повний текст джерела

Анотація:

Research and analyze the multi-thread schedule methods of the adjusted pressure casting control system deeply. Present an analysis method of related slice graphs based on the code slice and a theory of code subdivision based on the slice granularity and time slice. Then strictly divide the program of control system based on the time slice and obtain the strategies of event driven schedule and time slice schedule by analyzing the casting system. Subsequently, subdivide and recombine the multi-thread program slices based on the priority of the schedule strategies in control system. The control system was applied to the TYM-1 adjusted pressure casting system and the preferable effect is acquired.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Sliced cone"

Jones, Elizabeth Marie Matteson. "Comparing Cone Beam Computed Tomography with Multi-Slice Computed Tomography in Diagnosing Osseous Defects at the Mandibular Condyle." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1427278935.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Dalbom, Axel, and Tim Svensson. "Implementing the Load Slice Core on a RISC-V based microarchitecture." Thesis, Uppsala universitet, Datorarkitektur och datorkommunikation, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-424385.

Повний текст джерела

Анотація:

As cores have become better at exposing Instruction-Level Parallelism (ILP), they have become bigger, more complex, and consumes more power. These cores are approaching the Power- and Memory-wall quickly. A new microarchitecture proposed by Carlson et. al claims to solve these problems. They claim that the new microarchitecture, the Load Slice Core, is able to outperform both In-Order and Out-of-Order designs in an area and power restricted environment. Based on Carlson et. al.’s work, we have implemented and evaluated a prototype version of their Load Slice Core using the In-Order Core Ariane. We evaluated the Load Slice Core by comparing the LSC to an IOC when running a microbenchmark designed by us, and when running a set of Application Benchmarks. The results from the Microbenchmark are promising, the LSC outperformed the comparable IOC in each test but problems related to the configuration of the design were found. The results from the Application Benchmarks are inconclusive. Due to time constraints, only a partially functioning LSC were compared to a comparable IOC. From these results we found that the LSC performed comparably or slightly worse than its IOC counterpart. More research on the subject is required for any conclusive statement on the microarchitecture can be made, but it is the opinion of this paper’s authors that it does show promise.

Стилі APA, Harvard, Vancouver, ISO та ін.

Fentner, David A. "A Comparative Image Quality Analysis between Multi-Slice Computed Tomography and Cone Beam Computed Tomography for Radiation Treatment Planning Purposes." University of Toledo Health Science Campus / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=mco1372413982.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Alarady, Mamdooh R. "Characterization of Image Quality between Multi-Slice Computed Tomography and Cone Beam Computed Tomography for Clinical Used Protocols in Radiation Therapy Treatment Planning." University of Toledo Health Science Campus / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=mco151080400269082.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Franzén, Johan. "FrankZlicer : Direct slicing using arcs." Thesis, Mittuniversitetet, Avdelningen för data- och systemvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-36021.

Повний текст джерела

Анотація:

3D printing a CAD modelnormally requires conversion into a polygon mesh, usually an STL-file, in orderto be able to load the model in the slicer. This conversion destroys roundsurfaces and replaces them with flat surfaces. Slicing a polygon mesh resultsin one or more polygons, consisting of a number of straight lines. This canaffect both dimensional accuracy and surface smoothness. Modern 3D-printerscan, in addition to straight lines, handle arcs. However, today’s commonslicers can not generate arcs as the input does not contain any curvedfeatures. This project aims at finding an alternative solution. By directslicing of CAD models the slices can contain arcs, and the slicer can producearc commands for the 3D-printer. During this project a prototype slicer isconstructed as a proof of concept. The prototype handles STEP-files as inputand creates both linear and circular movement for the 3D-printer. The resultsshow that both the intermediate files (STEP/STL) and the resulting G-code filescan get smaller, yet preserving the original shape, by using this method. Theproposed solution has a positive effect on the 3D-printing workflow as well, asthe intermediate files can be imported back into the CAD system. The projectconcludes that there is possibly a bright future for direct slicing, but thereare more problems to solve before it can become reality.

Стилі APA, Harvard, Vancouver, ISO та ін.

Gambaletta, Daniele. "Stampa 3D: progettazione e realizzazione di una stampante 3D FDM come caso di studio." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2019.

Знайти повний текст джерела

Анотація:

La rivoluzione industriale che stiamo vivendo, detta Industria 4.0, sta incoraggiando le aziende all'utilizzo di sistemi intelligenti e di nuove tecnologie informatiche. La produzione additiva (detta stampa 3D) è considerata una tecnologia essenziale in questa fase dati i numerosi vantaggi che porta. In questo documento verranno descritte le caratteristiche della stampa 3D e i software necessari per realizzare un oggetto fisico partendo da un modello 3D digitale, prendendo come riferimento la stampante 3D progettata e realizzata utilizzando principalmente tecnologie open source.

Стилі APA, Harvard, Vancouver, ISO та ін.

Hawthorne, Alicia Lynn. "The Development and Regeneration of the Serotonergic System." Case Western Reserve University School of Graduate Studies / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=case1264027000.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Твердохліб, Віталій Вікторович, Виталий Викторович Твердохлеб та Vitaliy Tverdohlib. "Метод підвищення продуктивності телекомунікаційних систем на основі управління інтенсивністю відеотрафіка". Thesis, Національний авіаційний університет, 2021. https://er.nau.edu.ua/handle/NAU/48932.

Повний текст джерела

Анотація:

Дисертаційна робота присвячена вирішенню актуальної науковоприкладної задачі, що полягає у забезпечення якості відеосервісів на необхідному рівні за рахунок зниження часу затримок доставки відеотрафіку у системі надання відеосервісів з використанням безпровідних телекомунікаційних мереж. Викладаються етапи створення методу управління інтенсивністю відеокадрів на рівні кодування сегментів кадрів та їхніх структурних складників, базові особливості якої полягають у тому, що для кожного сегменту формується кодовий опис у вигляді сукупності незалежних кодових структур. Це дозволяє здійснювати управління бітовою інтенсивністю відео за рахунок зміни кількості структурних складників кодової конструкції трансформованого сегменту кадру. Метод дозволяє забезпечити скорочення надмірності опису відеокадру за рахунок урахування структурних особливостей опису трансформант на рівні бітового представлення. Обгрунтовується доцільність підходу, що базується на виключенні ряду трансформант сегменту відеокадру з подальшою інтерполяцією, для побудови методу управління інтенсивністю відеопотоку з контрольованим рівнем якості. Розробляється метод управілння бітовою інтенсивністю відеотрафіку на базі інтенполяції трансформант, що забезпечує обробку відеопотоку у реальному часі. У рамках методу управління забезпечуються режими функціонування, у ході яких здійснюється зміна бітової інтенсивності да корегування рівня помилки, внесеної у процесі управління.
Диссертация посвящена решению актуальной научно-прикладной задачи, заключающейся в обеспечении качества видеосервисов на необходимом уровне за счет снижения времени задержек доставки видеотрафика в системе предоставления видеосервисов с использованием беспроводных телекоммуникационных сетей. Излагаются этапы создания метода управления интенсивностью видеокадров на уровне кодирования сегментов кадров и их структурных составляющих, базовые особенности которого заключаются в том, что для каждого сегмента формируется кодовый описание в виде совокупности независимых кодовых структур. Подход на основе независимых кодовых структур позволяет осуществлять управление битовой интенсивностью видео за счет изменения количества структурных составляющих кодовой конструкции трансформированного сегмента кадра. Метод позволяет обеспечить сокращение избыточности описания видеокадра за счет учета структурных особенностей описания трансформант на уровне битового представления. Обосновывается целесообразность подхода, основанного на исключении ряда трансформант сегмента видеокадра с последующей интерполяцией для построения метода управления интенсивностью видеопотока с контролируемым уровнем качества. Разрабатывается метод управления битовой интенсивностью видеотрафика на базе интерполяции трансформант, что обеспечивает обработку видеопотока в реальном времени. В рамках метода управления обеспечиваются режимы функционирования, в ходе которых выполняется изменение битовой интенсивности да корректировки уровня ошибки, внесенной в процессе управления.
The dissertation is devoted to the solution of an urgent scientific and applied problem, which consists in ensuring the quality of video services at the required level by reducing the time of video traffic delivery delays in the system for providing video services using wireless telecommunication networks. The stages of creating a method for controlling the intensity of video frames at the level of encoding frame segments and their structural components are described, the basic features of which are that for each segment a code description is formed in the form of a set of independent code structures. This allows you to control the bit intensity of the video by changing the number of structural components of the code structure of the transformed frame segment. The method allows to reduce the redundancy of the video frame description by taking into account the structural features of the description of transformants at the level of bit representation. The expediency of an approach based on the exclusion of a number of transformants of a video frame segment with subsequent interpolation to construct a method for controlling the intensity of a video stream with a controlled level of quality is substantiated. A method for controlling the bit intensity of video traffic is being developed based on downsampling of frame slices at the transformants level with their subsequent interpolation, while processing the video stream in real time is provided. To implement the method for controlling the bit rate of video traffic based on downsampling of slices, sets of basic transformants and transformants are preliminarily formed in their structure, which can be thinned out at this stage. Within the framework of the control method, the existence of modes of operation is provided, during which the bit intensity is changed in real time and the error level is corrected, which can be introduced in the process of controlling the value of the video bit intensity.

Стилі APA, Harvard, Vancouver, ISO та ін.

Moštěk, Jiří. "Malý CNC stroj." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220350.

Повний текст джерела

Анотація:

This diploma thesis deals with the design and construction of a three-axis CNC machine primarily designed for PCB drilling and production of front panels for various electronic devices. All three axes are driven by stepper motors NEMA 23 which are connected to stepper motor drivers L6470. Processor STM32F407 is used to control the whole machine. The wiring is completed by a LCD display with touchscreen which is used to communicate with user. Data for drilling can be entering manually or via USB inerface. Part of this thesis is the selection of a suitable construction and components, assembling equipment, wiring design of electronic circuits and writing the code to control the machine. Finally, the parameters of the designed device have been measured.

Стилі APA, Harvard, Vancouver, ISO та ін.

(8793053), Gregory R. McKiernan. "Instability and Transition on a Sliced Cone with a Finite-Span Compression Ramp at Mach 6." Thesis, 2020.

Знайти повний текст джерела

Анотація:

Initial experiments on separated shock/boundary-layer interactions were carried out within the Boeing/AFOSR Mach-6 Quiet Tunnel. Measurements were made of hypersonic laminar-turbulent transition within the separation above a compression corner. This wind tunnel features freestream fluctuations that are similar to those in

flight. The present work focuses on the role of traveling instabilities within the shear layer above the separation bubble.

A 7 degree half-angle cone with a slice and a finite-span compression ramp was designed and tested. Due to a lack of space for post-reattachment sensors, early designs of this

generic geometry did not allow for measurement of a post-reattachment boundary layer. Oil flow and heat transfer measurements showed that by lengthening the ramp, the post-reattachment boundary layer could be measured. A parametric study was completed to determine that a 20 degree ramp angle caused reattachment at 45% of the

total ramp length and provided the best flow field for boundary-layer transition measurements.

Surface pressure fluctuation measurements showed post-reattachment wave packets and turbulent spots. The presence of wave packets suggests that a shear-layer

instability might be present. Pressure fluctuation magnitudes showed a consistent transition Reynolds numbers of 900000, based on freestream conditions and distance

from the nosetip. Pressure fluctuations grew exponentially from less than 1% to roughly 10% of tangent-wedge surface pressure during transition.

A high-voltage pulsed plasma perturber was used to introduce controlled disturbances into the boundary layer. The concept was demonstrated on a straight 7 degree half-angle circular cone. The perturbations successfully excited the second-mode instability at naturally unstable frequencies. The maximum second-mode amplitudes prior to transition were measured to be about 10% of the mean surface static pressure.

The plasma perturber was then used to disturb the boundary layer just upstream of the separation bubble on the cone with the slice and ramp. A traveling instability was measured post-reattachment but the transition location did not change for any tested condition. It appears that the excited shear-layer instability was not the dominant mechanism of transition.

Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Sliced cone"

Harper, Kenneth. Slimer, come home. Knight, 1988.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Slide Surprise: Come & Play. words & pictures, 2018.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Morgan, Matthew, and Ana Seixas. Come and Play (Slide Surprise). Quarto Publishing Group UK, 2018.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Harper, Kenneth. The Real Ghostbusters 3: Slimer Come Home. Hodder & Stoughton General Division, 1988.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Disparte, Allen. Cole _ Sliver Relationship: Sports Fiction Books for Teens. Independently Published, 2020.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rath, Eric C. Afterword. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780190240400.003.0019.

Повний текст джерела

Анотація:

In 1946 an English-language guidebook to Japanese food began with the following warning:Initiation of foreigners into Japanese dishes must be a gradual one proceeding from the familiar to the unfamiliar. Raw fish in slices (“sashimi”) and pickled vegetables (“konomono”), so dear and delicious to the Japanese palate, should be reserved for the initiated—these are dangerous things to offer to the beginner; dangerous because they may repel and disgust those who will come to appreciate Japanese delicacies when introduced to them from other easier approaches where they have to tackle with the line of least resistance....

Стилі APA, Harvard, Vancouver, ISO та ін.

The Slime Squad Vs the CyberPoos by Steve Cole. Red Fox, 2010.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Doyle, William. Introduction. Edited by William Doyle. Oxford University Press, 2012. http://dx.doi.org/10.1093/oxfordhb/9780199291205.013.0001.

Повний текст джерела

Анотація:

The idea of the Ancien Régime can be traced back to the French Revolution. As soon as it became clear, during the summer of 1788, that the structure and apparatus of authority in France was collapsing, people began to look forward to an era of change. Suddenly, it seemed, all their dreams of a better, juster, fairer, kinder, freer order of things might be made to come true. Nothing was exempt from these expectations, and they were only fanned in the spring of 1789 when all the King's subjects, prior to electing the Estates-General, which was expected to solve all the kingdom's problems, were invited to draw up lists of their grievances. Much of the Ancien Régime as the revolutionaries defined it is still accepted by historians as a meaningful framework for study. Revolutionary destruction sliced like a guillotine through its fabric, and exposed for posterity a vivid cross-section or snapshot of how things were before the cataclysm struck. But in condemning the Ancien Régime to death so comprehensively, the revolutionaries tended to erase the memory of its previous life, bequeathing a static version of the world before their own emergence which denied it vitality.

Стилі APA, Harvard, Vancouver, ISO та ін.

Slime Squad Vs the Last Chance Chicken by Steve Cole. Red Fox, 2011.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Herminghaus, S. Where grains and fluids meet: the complex physics of wet granular matter. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198789352.003.0009.

Повний текст джерела

Анотація:

In this chapter, the physics of wet granular matter is discussed. The practical significance of wet granular matter goes of course well beyond the construction of sand sculptures. Most industrial raw materials are solids and come in granular form, and the processes into which they feed involve their being mixed with liquids and agglomerated, conveyed, kneaded, or cast in moulds. For appropriately engineering these processes, including the minimization of energy consumption, a deep understanding of the mechanical properties of this class of materials is indispensable. Furthermore, if we want to mitigate, or even reliably predict, such devastating events as land slides or mud flows, we need to study the dynamical behaviour of wet granular matter in detail. This applies as well to other, similar systems of relevance, such as ice and snow avalanches, which can be modelled as wet granular systems as well.

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Sliced cone"

Darke, Priyanka, Sakshi Agrawal, and R. Venkatesh. "VeriAbs: A Tool for Scalable Verification by Abstraction (Competition Contribution)." In Tools and Algorithms for the Construction and Analysis of Systems, 458–62. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-72013-1_32.

Повний текст джерела

Анотація:

AbstractVeriAbs is a strategy selection-based reachability verifier for C programs. The selection of a suitable strategy is from a pre-defined set of strategies and by taking into account the syntax and semantics of the code to be verified. This year we present VeriAbs version 1.4.1 in which a novel preprocessor to strategy selection is introduced. The preprocessor checks for the feasibility of performing a lightweight slicing of the input code using function call graph and variable reference information. By this if the program is found to besliceable, sub-programs or slices are generated, and the known strategy selection algorithm of VeriAbs is applied to each slice. The verification results of each slice are then composed to derive that of the entire program. This compositional verification has improved the scalability of VeriAbs and presented in this paper.

Стилі APA, Harvard, Vancouver, ISO та ін.

Kawamura, Kiichiro, Kazumasa Oguri, Mutsuo Inoue, Kan-Hsi Hsiung, Taishi Kudaka, and Ken Takai. "Ongoing Persistent Slope Failures at the Toe of a Giant Submarine Slide in the Ryukyu Trench that Generated the AD 1771 Meiwa Tsunami." In Progress in Landslide Research and Technology, Volume 1 Issue 2, 2022, 63–74. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-18471-0_5.

Повний текст джерела

Анотація:

AbstractThis study investigates sedimentation processes and associated submarine sliding on the floor of the Ryukyu Trench. Three dive surveys were conducted using the manned submersible Shinkai 6500 (hereafter 6K) in the trench. The AD 1771 Meiwa tsunami was generated by a giant submarine slide on the landward trench slope in this region. Dive survey site 6K#1469 was located on a mouth of the submarine canyon in the forearc basin. Dive survey site 6K#1468 was located on the uppermost part of the submarine slide, where steps and fissures were observed. Dive survey site 6K#1467 was located at the toe of the submarine slide, which is covered by a muddy sediment layer. Core sample 6K#1467 measured 36.3 cm long and comprised muddy sediments interlayered with silt and/or sand laminations. The paleocurrent direction of the laminated sediments is mostly from north to south, indicating that they were not transported along with the trench but were from the landward slope, probably via repeated small submarine slides. The sedimentation rate for sample 6K#1467 was estimated at 2.42 mm/year using a depth profile of 210Pbex concentration within 10 cm deep and a date for the sediment of ~ 50 year ago. Based on the sedimentation rate and the number of laminae, the typical recurrence interval of the silt/sand layers is calculated to be ~ 6 year. We interpret these results as indicating that repeated small submarine slides have occurred persistently (recurrence interval of ~ 6 year) at the toe of the investigated giant submarine slide in the Ryukyu Trench over the last 50 year.

Стилі APA, Harvard, Vancouver, ISO та ін.

Burkhart, Jerry. "Multiplication Slide Rules." In Advanced Common Core Math Explorations GRADES 5-8, 137–56. New York: Routledge, 2021. http://dx.doi.org/10.4324/9781003232773-11.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ren, Guangbin, Xieping Wang, and Zhenghua Xu. "Slice Regular Functions on Regular Quadratic Cones of Real Alternative Algebras." In Trends in Mathematics, 227–45. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-42529-0_13.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yiasemis, Pantelis Stylianos, and Andreas S. Andreou. "Locating and Correcting Software Faults in Executable Code Slices via Evolutionary Mutation Testing." In Enterprise Information Systems, 207–27. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-40654-6_13.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bacher, K., K. Mermuys, J. Casselman, and H. Thierens. "Evaluation of Effective Patient Dose in Paranasal Sinus Imaging: Comparison of Cone Beam CT, Digital Tomosynthesis and Multi Slice CT." In IFMBE Proceedings, 458–60. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-03902-7_129.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Dent, Benjamin, and Ray Collins. "Our approach to value chain thinking and analysis." In A manual for agribusiness value chain analysis in developing countries, 3–24. Wallingford: CABI, 2021. http://dx.doi.org/10.1079/9781789249361.0001.

Повний текст джерела

Анотація:

Abstract This paper introduces a new approach: Value Chain Thinking or VCT. VCT involves chain members collaborating to understand, create, deliver and share value as defined by shoppers and consumers. The aim of collaboration is that the value chain improves its effectivenes(maximising the opportunities for creating value) and its efficiency (creating and delivering that value at least cost and with minimum wastage). In this way, collaboration increases the size of the pie, and so chain members collectively can increase the size of each of their own slices without needing to reduce someone else's. VCT increases chain members' incomes by sharing the higher returns which come from: (1) Increasing revenue into the chain through understanding market opportunities, and cooperating to focus on creating and delivering what these opportunities require; (2) Reducing waste by tracing and tackling the root causes of waste across the chain; and (3) Everyone being a better supplier to their customers (more reliable and more consistent), and so avoiding the need to compete with other suppliers on price alone. The paper also provides case studies on which VCT can be applied and also tips on how to apply this new approach.

Стилі APA, Harvard, Vancouver, ISO та ін.

Barjasteh, Arash. "March 2019 Flood Impact on the Stability of Ambal Salt Ridge in the Gotvand Dam Reservoir, Southern Iran." In Progress in Landslide Research and Technology, Volume 1 Issue 2, 2022, 415–23. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-18471-0_30.

Повний текст джерела

Анотація:

AbstractAmbal salt ridge is a unique exposure of salt piercement in the reservoir of Gotvand dam in the southwest of Iran. It is composed of evaporitic Gachsaran Formation of Oilgo-Miocene Age. This structurally controlled piercement is accompanied by subsidence and sliding of highly soluble layers into the dam reservoir. The region is affected by neotectonic activity due to proximity to two known active faults namely, Lahbari and Pir-Ahmad thrust faults. Based on a four year field observation and monitoring, a gradual and continuous sliding is occurring that is intensified by ground water circulation through evaporite karstic sinkholes and fracture systems. The subsidence and sliding of the Gachsaran evaporitic layers increased significantly after a severe flash flooding in March 2019. The water level rising due to flood event caused filling and saturation of the existing sinkholes in the salt ridge that facilitated and prompted development of land sliding. The situation is expected to be more critical if a moderate to high earthquake would happen since the dam lies in an active tectonic zone of the Zagros Fold Belt. Land subsidence and sliding was facilitated by high fracturing due to neotectonic activity. Finally, based on the Newmark method, slide potential of the largest landslide body of the Ambal ridge was calculated considering geotechnical parameters obtained from core drilling and partial saturation of the salt body during March, 2019 flooding of Karun River.

Стилі APA, Harvard, Vancouver, ISO та ін.

"A Slice of a Cone." In A Day's Adventure in Math Wonderland, 119–40. WORLD SCIENTIFIC, 2008. http://dx.doi.org/10.1142/9789812814777_0010.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Haberland, Ulrike, and Thomas Allmendinger. "Technical requirements for cardiac CT scanning." In EACVI Handbook of Cardiovascular CT, edited by Oliver Gaemperli, Pal Maurovich-Horvat, Koen Nieman, Gianluca Pontone, and Francesca Pugliese, 7—C1.2.S6. Oxford University PressOxford, 2022. http://dx.doi.org/10.1093/med/9780192884459.003.0002.

Повний текст джерела

Анотація:

Abstract The clinical requirements for high-quality cardiac imaging can be directly translated into technical requirements for the CT scanner. The ability to freeze cardiac motion in each individual image yields the notion of temporal resolution (scanner rotation time, number of sources, multisegment reconstruction, and motion correction algorithms). The aim of minimizing the number of involved cardiac cycles is translated into detector coverage (physical collimation, number of slices, slice width). The structure size of interest in typical coronary lesions is on the sub-millimetre level resulting in the need for isotropic spatial resolution-enabled reconstruction (number of detector channels, detector element size). Finally, in the case of angiographic imaging, which is based on high iodine contrast imaging, requirements towards the X-ray tube and generator come into play (low kV, maximum tube current, tube power).

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Sliced cone"

Thome, John, John D. Reinert, Anubhav Dwivedi, and Graham V. Candler. "Computational Study of Flow on a Sliced Cone-Flap Geometry." In 2018 Fluid Dynamics Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2018. http://dx.doi.org/10.2514/6.2018-3397.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Terceros, Maheck J., and Daniel Araya. "Influence of Boundary Layer Transition on the Aerodynamics of a Sliced Cone with Ramp at Mach 6." In AIAA Scitech 2021 Forum. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2021. http://dx.doi.org/10.2514/6.2021-1852.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sattar, Danish, and Ashraf Matrawy. "Proactive and Dynamic Slice Allocation in Sliced 5G Core Networks." In 2020 International Symposium on Networks, Computers and Communications (ISNCC). IEEE, 2020. http://dx.doi.org/10.1109/isncc49221.2020.9297185.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Marino, Mario Donato, Mario Donato Marino, and O. Paulo. "32-core CMP with multi-sliced L2: 2 and 4 cores sharing a L2 slice." In 2006 18th International Symposium on Computer Architecture and High Performance Computing. IEEE, 2006. http://dx.doi.org/10.1109/sbac-pad.2006.5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Dong, Zhangfu, Yuting He, Xiaoming Qi, Yang Chen, Huazhong Shu, Jean-Louis Coatrieux, Guanyu Yang, and Shuo Li. "MNet: Rethinking 2D/3D Networks for Anisotropic Medical Image Segmentation." In Thirty-First International Joint Conference on Artificial Intelligence {IJCAI-22}. California: International Joint Conferences on Artificial Intelligence Organization, 2022. http://dx.doi.org/10.24963/ijcai.2022/122.

Повний текст джерела

Анотація:

The nature of thick-slice scanning causes severe inter-slice discontinuities of 3D medical images, and the vanilla 2D/3D convolutional neural networks (CNNs) fail to represent sparse inter-slice information and dense intra-slice information in a balanced way, leading to severe underfitting to inter-slice features (for vanilla 2D CNNs) and overfitting to noise from long-range slices (for vanilla 3D CNNs). In this work, a novel mesh network (MNet) is proposed to balance the spatial representation inter axes via learning. 1) Our MNet latently fuses plenty of representation processes by embedding multi-dimensional convolutions deeply into basic modules, making the selections of representation processes flexible, thus balancing representation for sparse inter-slice information and dense intra-slice information adaptively. 2) Our MNet latently fuses multi-dimensional features inside each basic module, simultaneously taking the advantages of 2D (high segmentation accuracy of the easily recognized regions in 2D view) and 3D (high smoothness of 3D organ contour) representations, thus obtaining more accurate modeling for target regions. Comprehensive experiments are performed on four public datasets (CT\&MR), the results consistently demonstrate the proposed MNet outperforms the other methods. The code and datasets are available at: https://github.com/zfdong-code/MNet

Стилі APA, Harvard, Vancouver, ISO та ін.

Sattar, Danish, and Ashraf Matrawy. "Towards Secure Slicing: Using Slice Isolation to Mitigate DDoS Attacks on 5G Core Network Slices." In 2019 IEEE Conference on Communications and Network Security (CNS). IEEE, 2019. http://dx.doi.org/10.1109/cns.2019.8802852.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ramaswami, Hemant, and Sam Anand. "Multiple Parting Surfaces for Sand Casting." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-61845.

Повний текст джерела

Анотація:

Multiple parting surfaces are frequently used in sand casting, die casting and injection molding processes. However, most research in this area has focused on die casting and injection molding. Parting surfaces for die casting and injection molding are relatively easier to compute compared to sand casting because their orientations and shapes are less restricted. In sand casting, the parting surfaces have to be parallel to each other and perfectly flat to permit the use of flasks with more than two pieces. The concepts of visibility and object illumination can be used to divide an object into two parts using a single parting surface. These methods, however, cannot be directly used for multiple parting surfaces. In this paper, a methodology to generate multiple parting surfaces for sand casting is described. The method uses Gauss maps to identify potential casting directions, and global accessibility cones to determine which faces can be cast in the same part of the pattern. The pattern is sliced using parallel planes such that each slice can be withdrawn from the mold in at least one direction. After the object is sliced, the number of parting surfaces is reduced by combining adjacent middle sections depending on their accessible directions.

Стилі APA, Harvard, Vancouver, ISO та ін.

Carlson, Trevor E., Wim Heirman, Osman Allam, Stefanos Kaxiras, and Lieven Eeckhout. "The load slice core microarchitecture." In ISCA '15: The 42nd Annual International Symposium on Computer Architecture. New York, NY, USA: ACM, 2015. http://dx.doi.org/10.1145/2749469.2750407.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hegde, Parikshit, Chandana S, Shashank Anand Patil, Sanskruti S. Patil, and Maliha Simeen Bilal. "5G Context Prioritized Core Slice." In 2022 IEEE 7th International conference for Convergence in Technology (I2CT). IEEE, 2022. http://dx.doi.org/10.1109/i2ct54291.2022.9824342.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lakshminarasimhan, Kartik, Ajeya Naithani, Josué Feliu, and Lieven Eeckhout. "The Forward Slice Core Microarchitecture." In PACT '20: International Conference on Parallel Architectures and Compilation Techniques. New York, NY, USA: ACM, 2020. http://dx.doi.org/10.1145/3410463.3414629.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Sliced cone"

Ekdahl, Carl August. User Guide for the LSP-Slice PIC code. Office of Scientific and Technical Information (OSTI), November 2014. http://dx.doi.org/10.2172/1164432.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wolfe, S. Soil auger and slide-hammer core sampling. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 2011. http://dx.doi.org/10.4095/288045.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rising, Michael. MCNP(R) Particle Transport Code: Its History and Future [Slides]. Office of Scientific and Technical Information (OSTI), April 2021. http://dx.doi.org/10.2172/1779633.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!