Увійти

Готові списки джерел за темами / Six-Phase induction machine / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Six-Phase induction machine.

Статті в журналах з теми "Six-Phase induction machine"

Автор: Grafiati

Опубліковано: 17 листопада 2022

Оновлено: 28 грудня 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Six-Phase induction machine".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Singh, G. K., V. Pant, and Y. P. Singh. "Stability analysis of a multi-phase (six-phase) induction machine." Computers & Electrical Engineering 29, no. 7 (October 2003): 727–56. http://dx.doi.org/10.1016/s0045-7906(03)00003-x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Brkovic, Bogdan Mihailo, Milos Jecmenica, Emil Levi, and Zoran M. Lazarevic. "Saturated VSD model of a six‐phase induction machine." IET Electric Power Applications 14, no. 14 (December 2020): 2762–71. http://dx.doi.org/10.1049/iet-epa.2020.0531.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Brkovic, Bogdan Mihailo, Leposava Bratimir Ristic, Mladen Vlajko Terzic, Ana Vladan Stankovic, and Zoran Mileta Lazarevic. "Magnetizing Inductance Determination in a Six-Phase Induction Machine." IEEE Transactions on Energy Conversion 34, no. 2 (June 2019): 812–23. http://dx.doi.org/10.1109/tec.2018.2881763.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Mohanty, Alok Kumar, and K. B. Yadav. "Performance Characteristics of Six-Phase Induction Generator for Renewable Power Generation." Indonesian Journal of Electrical Engineering and Computer Science 5, no. 2 (February 1, 2017): 299. http://dx.doi.org/10.11591/ijeecs.v5.i2.pp299-308.

Повний текст джерела

Анотація:

<p>This paper presents the performance behavior of a multi-phase induction generator operating in six-phase mode. An experimental analysis has been done to determine operating characteristics of the six-phase machine to illustrate the advantageous features of the machine as compared to its three phase counterpart. The machine is configured to operate as a standalone power source in conjunction with a DC prime mover. The multi-phase machine can operate with one three phase capacitor bank which does not lead to complete shutdown of the system during fault conditions across one of its two sets of its stator windings. In the analysis the machine is connected to different capacitor configuration and the influence of these connections on the machine performance during no load and load have been implemented. Experimental results include voltage build up of the machine with different excitation capacitors at both sets of stator windings with changing speed during no load condition, resistive load condition and resistive inductive load condition with simple shunt and short shunt configuration.</p>

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Mohanty, Alok Kumar, and K. B. Yadav. "Transient Analysis of a Multi-phase Induction Machine Operating as Generator." Indonesian Journal of Electrical Engineering and Computer Science 2, no. 1 (April 1, 2016): 79. http://dx.doi.org/10.11591/ijeecs.v2.i1.pp79-87.

Повний текст джерела

Анотація:

<em>Multi-phase machines are considered serious contenders as compared to the three phase machines for variable applications in generating mode. </em><em>This paper presents the transient performance analysis of a multi-phase induction machine operating in six-phase mode for power generation. In this paper the simulation and experimental analysis of a six-phase machine in generating mode have been made. The simulations are made and the machine functionality was investigated during no-load and when subjected to different types of loads. Experimental results are provided to confirm the ability of these models to represent during no load as well as during load period and the result were found to be satisfactory for power generation</em>.

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Che, Hang Seng, Emil Levi, Martin Jones, Mario J. Duran, Wooi-Ping Hew, and Nasrudin Abd Rahim. "Operation of a Six-Phase Induction Machine Using Series-Connected Machine-Side Converters." IEEE Transactions on Industrial Electronics 61, no. 1 (January 2014): 164–76. http://dx.doi.org/10.1109/tie.2013.2248338.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Vukosavic, S. N., M. Jones, E. Levi, and J. Varga. "Rotor flux oriented control of a symmetrical six-phase induction machine." Electric Power Systems Research 75, no. 2-3 (August 2005): 142–52. http://dx.doi.org/10.1016/j.epsr.2005.02.006.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Abdel-Khalik, Ayman S., Ahmed M. Massoud, and Shehab Ahmed. "Nine-Phase Six-Terminal Induction Machine Modeling Using Vector Space Decomposition." IEEE Transactions on Industrial Electronics 66, no. 2 (February 2019): 988–1000. http://dx.doi.org/10.1109/tie.2018.2833041.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Omeje, Crescent Onyebuchi, Damian Benneth Nnadi, and Stephen Ejiofor Oti. "Multi-phase inverter-controlled induction machine at varied rotor parameters." International Journal of Electrical and Computer Engineering (IJECE) 12, no. 5 (October 1, 2022): 4808. http://dx.doi.org/10.11591/ijece.v12i5.pp4808-4819.

Повний текст джерела

Анотація:

<p>This paper presents a step-wise modelling of a symmetrical six-phase induction machine driven by a six-phase diode clamped multi-level inverter at a varying rotor resistance and motor inertia. The machine drive process was considered in two stages. The first stage presents the dynamic behavior of the machine when a load torque of 0 Nm and 100 Nm is applied at a varied rotor external resistance value of (0.8 and 3.2) Ω with constant motor inertia. The second stage showcased the variations in the speed, electromagnetic torque and rotor current when motor inertia is varied at (0.5 and 1.5) Kg-m2 with rotor resistance held constant. A six-phase five-level diode clamped converter phase displaced by sixty degrees with a modulation index of 0.8 was modeled to drive the poly-phase machine at a reduced %THD. All machine models were simulated in MATLAB 7.11. The simulation results showed that reduced oscillations in rotor current, motor speed and torque pulsations were achieved at a varied external rotor resistance and motor inertia.</p>

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Brkovic, Bogdan, and Milos Jecmenica. "Calculation of Rotor Harmonic Losses in Multiphase Induction Machines." Machines 10, no. 5 (May 20, 2022): 401. http://dx.doi.org/10.3390/machines10050401.

Повний текст джерела

Анотація:

The topic of this paper is the determination of rotor harmonic losses in multiphase machines. Specifically, harmonic losses occur in the rotor winding and core due to higher-order spatial harmonics of the flux density. This phenomenon influences machine parameters and overall performance and increases temperature rise in parts of the rotor. The flux density distribution is determined by the stator magnetomotive force harmonic content, which is directly related to the winding distribution. A cage-rotor asymmetrical six-phase induction machine is selected for this case study. An analysis of different stator winding topologies and their influence on harmonic losses is presented. A finite element-based method for calculating the contribution of individual stator magnetomotive force harmonics to the rotor losses is developed and described in the paper. The analysis includes scenarios with different phase current waveforms to emphasize the issues specific to the asymmetrical six-phase machine. It is found that the magnetomotive force components generated by non-torque-producing current components contribute significantly to harmonic losses. The obtained results can represent a foundation for optimal stator winding topology selection. This work is intended to motivate the development of new and the modification of existing models to properly include rotor harmonic losses during the design, performance prediction, and control of multiphase machines.

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Ben Slimene, Marwa. "PERFORMANCE ANALYSIS OF SIX-PHASE INDUCTION MACHINE-MULTILEVEL INVERTER WITH ARBITRARY DISPLACEMENT." Electrical Engineering & Electromechanics, no. 4 (August 12, 2020): 12–16. http://dx.doi.org/10.20998/2074-272x.2020.4.02.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Gonzalez, Osvaldo, Magno Ayala, Jesus Doval-Gandoy, Jorge Rodas, Raul Gregor, and Marco Rivera. "Predictive-Fixed Switching Current Control Strategy Applied to Six-Phase Induction Machine." Energies 12, no. 12 (June 15, 2019): 2294. http://dx.doi.org/10.3390/en12122294.

Повний текст джерела

Анотація:

In applications such as multiphase motor drives, classical predictive control strategies are characterized by a variable switching frequency which adds high harmonic content and ripple in the stator currents. This paper proposes a model predictive current control adding a modulation stage based on a switching pattern with the aim of generating a fixed switching frequency. Hence, the proposed controller takes into account the prediction of the two adjacent active vectors and null vector in the ( α - β ) frame defined by space vector modulation in order to reduce the (x-y) currents according to a defined cost function at each sampling period. Both simulation and experimental tests for a six-phase induction motor drive are provided and compared to the classical predictive control to validate the feasibility of the proposed control strategy.

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Ai, Yongle, Yumei Wang, and Kamper Marrten. "Modelling and control of six-phase induction machine under special current waveform." International Journal of Modelling, Identification and Control 10, no. 1/2 (2010): 4. http://dx.doi.org/10.1504/ijmic.2010.033838.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Abdel-Khalik, Ayman S., Mahmoud S. Abdel-Majeed, and Shehab Ahmed. "Effect of Winding Configuration on Six-Phase Induction Machine Parameters and Performance." IEEE Access 8 (2020): 223009–20. http://dx.doi.org/10.1109/access.2020.3044025.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Taheri, Asghar, Hai-Peng Ren, and Chun-Huan Song. "Sensorless Direct Torque Control of the Six-Phase Induction Motor by Fast Reduced Order Extended Kalman Filter." Complexity 2020 (September 30, 2020): 1–10. http://dx.doi.org/10.1155/2020/8985417.

Повний текст джерела

Анотація:

In this paper, a simple extended Kalman Filter (EKF) controller for direct torque control (DTC) of a six-phase induction machine in all speed ranges is proposed. The aim of this paper is to decrease the execution time of EKF modeling of a six-phase induction motor. The proposed method is fast and can operate online. If the machine parameters are changed during the operation, the EKF algorithm is activated to find parameters used for controlling the motor. In low speed, not only the motor speed measurement but also the DTC of machine is difficult. The EKF model can estimate speed, flux, load torque, and stator resistance in low speed; thus, optimization can be performed in all loads and speed range. The proposed method increases the accuracy of DTC of the six-phase induction machine and decreases the computation cost of the system using the simplified algorithm. The simulation and experimental results verify the effectiveness and the robustness of the proposed method against parameter variations.

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Slimene, Marwa Ben, and Mohamed Arbi Khlifi. "Investigation on the Effects of Magnetic Saturation in Six-Phase Induction Machines with and without Cross Saturation of the Main Flux Path." Energies 15, no. 24 (December 12, 2022): 9412. http://dx.doi.org/10.3390/en15249412.

Повний текст джерела

Анотація:

The operational characteristics during transients are significantly influenced by magnetic saturation in electrical equipment. For the computation of steady-state rated operation in multiphase induction machines, the assumption of linear magnetic behavior of the iron core in classical machine models may be sufficient. The mathematical models of the considered models differ in terms of the existence or absence of dynamic cross-saturation effects. The approach that is most frequently used to examine the impact of magnetic saturation is based on the state-space variable representation of the mathematical model in dynamic axes (d–q). The purpose of this research is to investigate the effects of magnetic saturation on six-phase induction machines. In this study, a d–q transformation-based model of a six-phase induction machine (SPIM), including the magnetic saturation effect, is developed. The cross-saturation and the common mutual leakage inductance between the two sets of stators’ windings are then developed and analyzed, and the developed models were simulated and results are compared with and without cross-saturation. The main and leakage flux saturation, as well as the mutual coupling between the two windings, are all accounted for in the model, which is based on the vector space decomposition method. A significant increase in currents and voltage results from the highly saturated magnetic paths of the leakage fluxes in six-phase induction machines. In order to investigate the impact of cross-saturation, inductances computed using analytical methods and those without taking cross-saturation into consideration were compared. These outcomes are then transformed into a condensed current depending on parameter functions for transient machine models.

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Hajary, Ali, Seyed Ghodratollah Seifossadat, Reza Kianinezhad, Alireza Saffarian, and Seyed Saeedollah Mortazavi. "An adaptive PI control design for multi-phase machines in healthy and faulty operations." COMPEL - The international journal for computation and mathematics in electrical and electronic engineering 38, no. 6 (October 24, 2019): 1986–2000. http://dx.doi.org/10.1108/compel-12-2018-0552.

Повний текст джерела

Анотація:

Purpose This paper aims to present a novel robust control method based on an adaptive PI controller (APIC) to compensate for different disturbances and unknown dynamics for multi-phase induction machines. Design/methodology/approach The gains of the APIC are adapted online according to the tracking error. Proposed APIC is accompanied with designed linear disturbance observer (LDO) to present robust behavior to machine parameter variations and fault disturbances. Findings The results show remarkable dynamic performance in both healthy and faulty conditions when the six-phase induction machine works under APIC and LDO schemes. Originality/value The proposed controller need not readjust current controllers for the post-fault condition. The developed Simulink model efficiency is confirmed through experimental tests.

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Dezhin, D., I. Dezhina, and R. Ilyasov. "SMALL-SCALE PROTOTYPE OF A FULLY HTS-2G SIX-PHASE INDUCTION ELECTRICAL MACHINE." Journal of Physics: Conference Series 1559 (June 2020): 012146. http://dx.doi.org/10.1088/1742-6596/1559/1/012146.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Nabi, H. P., P. Dadashi, and A. Shoulaie. "A Novel Structure for Vector Control of Symmetrical Six-Phase Induction Machines with Three Current Sensors." Engineering, Technology & Applied Science Research 1, no. 2 (April 28, 2011): 23–29. http://dx.doi.org/10.48084/etasr.18.

Повний текст джерела

Анотація:

Vector control is one of the most popular multiphase induction machine drive methods due to its dynamic performance. Since all phase currents are needed in vector control drive, by increasing phase numbers, the number of required current sensors increases which is one of the disadvantages of vector control in multiphase machine drives. In this paper vector control of a symmetrical six-phase induction machine with a novel configuration is presented. The aforementioned configuration is designed in a simple way that only three current sensors will be needed. Analytical equations are extracted in this paper to show that some of current components which do not contribute in torque production will be eliminated due to the proposed scheme. Simulation and experimental results are provided to verify the benefits of the proposed configuration.

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Abdel-Khalik, Ayman S., Ahmed M. Massoud, and Shehab Ahmed. "An Improved Torque Density Pseudo Six-Phase Induction Machine Using a Quadruple Three-Phase Stator Winding." IEEE Transactions on Industrial Electronics 67, no. 3 (March 2020): 1855–66. http://dx.doi.org/10.1109/tie.2019.2901574.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Pantea, Alin, Amine Yazidi, Franck Betin, Mehdi Taherzadeh, Sebastien Carriere, Humberto Henao, and Gerard-Andre Capolino. "Six-Phase Induction Machine Model for Electrical Fault Simulation Using the Circuit-Oriented Method." IEEE Transactions on Industrial Electronics 63, no. 1 (January 2016): 494–503. http://dx.doi.org/10.1109/tie.2015.2493727.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Aroquiadassou, Gérard, Andrea Cavagnino, Humberto Henao, Aldo Boglietti, and Gérard-André Capolino. "A new circuit-oriented model for the analysis of six-phase induction machine performances." Electric Power Systems Research 78, no. 10 (October 2008): 1798–805. http://dx.doi.org/10.1016/j.epsr.2008.03.008.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Chinmaya, K. A., and Girish Kumar Singh. "Integrated onboard single‐stage battery charger for PEVs incorporating asymmetrical six‐phase induction machine." IET Electrical Systems in Transportation 9, no. 1 (March 2019): 8–15. http://dx.doi.org/10.1049/iet-est.2018.5015.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Serra, João, Imed Jlassi, and Antonio J. Marques Cardoso. "A Computationally Efficient Model Predictive Control of Six-Phase Induction Machines Based on Deadbeat Control." Machines 9, no. 12 (November 23, 2021): 306. http://dx.doi.org/10.3390/machines9120306.

Повний текст джерела

Анотація:

Model predictive current control (MPCC) has recently become a viable alternative for multiphase electric drives, because it easily exploits the inherent advantages of multi-phase machines. However, the prediction in MPCC requires a high number of voltage vectors (VVs), being therefore computationally demanding. In that regard, this paper proposes a computationally efficient MPCC of an asymmetrical six-phase induction machine drive (ASIMD) that reduces the number of VVs used for prediction. By using the characteristics of the deadbeat control (DB), the proposed method obtains a reference voltage vector (RVV), where its position will serve as a reference and integrates the MPCC scheme. Only 4 out of 13 predictions are needed to determine the best VV, dramatically reducing the algorithm computation. Experimental results for a six-phase case study compare the standard MPCC with the suggested method, confirming that deadbeat model predictive current control (DB-MPCC) shows that the execution time can be shortened by 48.8% and successfully improve the motor performance and efficiency.

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Taheri, Asghar, Abdolreza Rahmati, and Shahriyar Kaboli. "Efficiency Improvement in DTC of Six-Phase Induction Machine by Adaptive Gradient Descent of Flux." IEEE Transactions on Power Electronics 27, no. 3 (March 2012): 1552–62. http://dx.doi.org/10.1109/tpel.2011.2163420.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Abdel-Khalik, Ayman Samy, Mostafa S. Hamad, Ahmed M. Massoud, and Shehab Ahmed. "Postfault Operation of a Nine-Phase Six-Terminal Induction Machine Under Single Open-Line Fault." IEEE Transactions on Industrial Electronics 65, no. 2 (February 2018): 1084–96. http://dx.doi.org/10.1109/tie.2017.2733471.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Fnaiech, M. A., F. Betin, G. A. Capolino, and F. Fnaiech. "Fuzzy Logic and Sliding-Mode Controls Applied to Six-Phase Induction Machine With Open Phases." IEEE Transactions on Industrial Electronics 57, no. 1 (January 2010): 354–64. http://dx.doi.org/10.1109/tie.2009.2034285.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Gary, Echague, Ayala Magno, and Rodas Jorge. "Design, Analysis and Validation of a Six-Phase Induction Machine from a Commercial Three-Phase for Academic Research." IEEE Latin America Transactions 18, no. 11 (November 2020): 1943–52. http://dx.doi.org/10.1109/tla.2020.9398636.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Lyas, Bekrar, Omar Bouhali, Saad Khadar, and Yaichi Mohammed. "A Novel Dual Three-Phase Multilevel Space Vector Modulation for Six-Phase Multilevel Inverters to Drive Induction Machine." Modelling, Measurement and Control A 82, no. 2-4 (December 30, 2019): 43–53. http://dx.doi.org/10.18280/mmc_a.922-407.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Singh, G. K., S. N. Singh, and R. P. Saini. "Steady-State Modeling and Analysis of Grid-Connected Six-Phase Induction Generator for Renewable Energy Generation." Advanced Materials Research 516-517 (May 2012): 645–59. http://dx.doi.org/10.4028/www.scientific.net/amr.516-517.645.

Повний текст джерела

Анотація:

This article presents the steady-state modeling and analysis of a grid-connected six-phase induction generator for renewable energy generation powered by hydro turbine. The basis of the analysis is nodal admittance method as applied to the equivalent circuit, and used to analyze the behavior of the machine for the operating mode such as (i) when only one three-phase winding set is connected to grid, (ii) when one three-phase winding set is connected to grid and other three-phase winding set is subjected to load, and (iii) when both the three-phase winding sets are connected to grid through an interconnecting Y-/Y six-phase to three-phase transformer. Nodal admittance based matrix equations are easier to modify in order to account for mutual leakage coupling between two three-phase winding sets, core loss component, and make the analysis very easy, fast and accurate. Through analytical and practical studies, it is shown that machine can feed direct, reliable, and low cost power to grid without interface network. The analytical results are found to be in good agreement with experimental results.

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Romero, Carlos, Larizza Delorme, Osvaldo Gonzalez, Magno Ayala, Jorge Rodas, and Raul Gregor. "Algorithm for Implementation of Optimal Vector Combinations in Model Predictive Current Control of Six-Phase Induction Machines." Energies 14, no. 13 (June 26, 2021): 3857. http://dx.doi.org/10.3390/en14133857.

Повний текст джерела

Анотація:

The development of new control techniques for multiphase induction machines (IMs) has become a point of great interest to exploit the advantages of these machines compared to three-phase topology, for example, the reduced phase currents and lower harmonic contents. One of the most analyzed techniques is the model-based predictive current control (MPC) with a finite control set. This technique presents high x–y currents because of the application of one switching state throughout the whole sampling period. Nevertheless, it is one of the most used due to its excellent dynamic response. To overcome the aforementioned drawbacks, new techniques called virtual vectors have been developed, but although there are several articles with experimental results, the algorithm for implementing the technique has not been appropriately described. This document provides a clear and detailed explanation for algorithm implementation of virtual vectors through two proposed variants VV4 and VV11, in a six-phase machine drive. The first entails lower computational cost and the second lower loss in the x–y plane. According to performance indicators such as the total harmonic distortion and the mean square error for both case studies, experimental tests were evaluated to determine the implementation’s behaviour.

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Carvalho Souza, Francisco Elvis, Werbet Silva, Andrés Ortiz Salazar, José Paiva, Diego Moura, and Elmer Rolando Llanos Villarreal. "A Novel Driving Scheme for Three-Phase Bearingless Induction Machine with Split Winding." Energies 14, no. 16 (August 12, 2021): 4930. http://dx.doi.org/10.3390/en14164930.

Повний текст джерела

Анотація:

In order to reduce the costs of implementing the radial position control system of a three-phase bearingless machine with split winding, this article proposes a driving method that uses only two phases of the system instead of the three-phase traditional one. It reduces from six to four the number of inverter legs, drivers, sensors, and current controllers necessary to drive and control the system. To justify the proposal, this new power and control configuration was applied to a 250 W machine controlled by a digital signal processor (DSP). The results obtained demonstrated that it is possible to carry out the radial position control through two phases, without loss of performance in relation to the conventional three-phase drive and control system.

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Mohanty, Alok Kumar, and K. B. Yadav. "Estimation of excitation capacitance requirement of an isolated multi-phase induction generator for power generation." International Journal of Power Electronics and Drive Systems (IJPEDS) 7, no. 2 (June 1, 2016): 561. http://dx.doi.org/10.11591/ijpeds.v7.i2.pp561-567.

Повний текст джерела

Анотація:

<table width="593" border="1" cellspacing="0" cellpadding="0"><tbody><tr><td valign="top" width="387"><p> </p><p>Self Excited induction generators are used in remote places for electrical power generation from both conventional as well as non-conventional sources. An Induction generator can operate as a capacitor excited machine provided the machine is driven beyond synchronous speed and a suitable capacitor is connected across its terminals. In this paper a technique has been proposed to estimate the values of excitation capacitances to maintain desired terminal voltages in a multi-phase induction generator. A mathematical model using nodal admittance technique of a six-phase induction generator has been analyzed. Genetic algorithm technique is applied here to obtain the unknown parameters and the capacitance requirements to obtain desired terminal voltages under various operating conditions.</p></td></tr></tbody></table>

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Che, Hang Seng, Mario J. Duran, Emil Levi, Martin Jones, Wooi-Ping Hew, and Nasrudin Abd Rahim. "Postfault Operation of an Asymmetrical Six-Phase Induction Machine With Single and Two Isolated Neutral Points." IEEE Transactions on Power Electronics 29, no. 10 (October 2014): 5406–16. http://dx.doi.org/10.1109/tpel.2013.2293195.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Kianinezhad, R., B. Nahid-Mobarakeh, L. Baghli, F. Betin, and G. A. Capolino. "Modeling and Control of Six-Phase Symmetrical Induction Machine Under Fault Condition Due to Open Phases." IEEE Transactions on Industrial Electronics 55, no. 5 (May 2008): 1966–77. http://dx.doi.org/10.1109/tie.2008.918479.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Schreier, L., J. Bendl, and M. Chomat. "Effect of higher spatial harmonics on properties of six-phase induction machine fed by unbalanced voltages." Electrical Engineering 97, no. 2 (December 3, 2014): 155–64. http://dx.doi.org/10.1007/s00202-014-0319-9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Rahman, Ungku Mohamed Ismail Adrian Ungku Abdul, Wan Noraishah Wan Abdul Munim, Hang Seng Che, Mahdi Tousizadeh, and Khairul Safuan Muhammad. "Fault tolerance of asymmetrical six-phase induction machine during single open circuit fault to three open circuit faults using GUI." International Journal of Power Electronics and Drive Systems (IJPEDS) 11, no. 2 (June 1, 2020): 611. http://dx.doi.org/10.11591/ijpeds.v11.i2.pp611-617.

Повний текст джерела

Анотація:

The fault tolerance of multiphase drive is favourable in the industry for its reliability and safety reasons. However, from the educational point of view, the post-fault capability of six-phase machine is still unclear. This paper presents the fault tolerance of asymmetrical six-phase induction machine (A6-IM) under one to three open-circuit faults using Graphical User Interface (GUI). In this study, the capability of A6-IM has been interpreted through a simple and user-friendly GUI helping students to have a better understanding on the current limits of A6-IM. The optimization of post-fault current references is based on maximum torque (MT) and minimum loss (ML). This work provides GUI highlighting the post-fault derating of A6-IM with single isolated neutral (1N) in two different modes namely MT and ML for educational purposes.

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Geng, Yiwen, Zou Lai, Yonggang Li, Ding Wang, Ruicheng Chen, and Pengfei Zheng. "Sensorless Fault-Tolerant Control Strategy of Six-Phase Induction Machine Based on Harmonic Suppression and Sliding Mode Observer." IEEE Access 7 (2019): 110086–102. http://dx.doi.org/10.1109/access.2019.2933407.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Paredes, Jesus, Borja Prieto, Marco Satrustegui, Ibon Elosegui, and Patxi Gonzalez. "Improving the Performance of a 1-MW Induction Machine by Optimally Shifting From a Three-Phase to a Six-Phase Machine Design by Rearranging the Coil Connections." IEEE Transactions on Industrial Electronics 68, no. 2 (February 2021): 1035–45. http://dx.doi.org/10.1109/tie.2020.2969099.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Kali, Yassine, Magno Ayala, Jorge Rodas, Maarouf Saad, Jesus Doval-Gandoy, Raul Gregor, and Khalid Benjelloun. "Current Control of a Six-Phase Induction Machine Drive Based on Discrete-Time Sliding Mode with Time Delay Estimation." Energies 12, no. 1 (January 5, 2019): 170. http://dx.doi.org/10.3390/en12010170.

Повний текст джерела

Анотація:

This paper proposes a robust nonlinear current controller that deals with the problem of the stator current control of a six-phase induction motor drive. The current control is performed by using a state-space representation of the system, explicitly considering the unmeasurable states, uncertainties and external disturbances. To estimate these latter effectively, a time delay estimation technique is used. The proposed control architecture consists of inner and outer loops. The inner current control loop is based on a robust discrete-time sliding mode controller combined with a time delay estimation method. As said before, the objective of the time delay estimation is to reconstruct the unmeasurable states and uncertainties, while the sliding mode aims is to suppress the estimation error, to ensure robustness and finite-time convergence of the stator currents to their desired references. The outer loop is based on a proportional-integral controller to control the speed. The stability of the current closed-loop system is proven by establishing sufficient conditions on the switching gains. Experimental work has been conducted to verify the performance and the effectiveness of the proposed robust control scheme for a six-phase induction motor drive. The results obtained have shown that the proposed method allows good performances in terms of current tracking, in their corresponding planes.

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Bouziane, Meliani, and Meroufel Abdelkader. "Direct space vector modulation for matrix converter fed dual star induction machine and neuro-fuzzy speed controller." Bulletin of Electrical Engineering and Informatics 8, no. 3 (September 1, 2019): 818–28. http://dx.doi.org/10.11591/eei.v8i3.1560.

Повний текст джерела

Анотація:

This paper presents the modeling, design, and simulation of an adaptive neuro fuzzy inference strategy (ANFIS) for controlling the speed of the Double Star induction Machine (DSIM), the machine is fed by three phase direct matrix converter which makes directly AC-AC power conversion is modeled using Direct Space Vector Modulation technique(DSVM) for direct matrix converter. Double star Induction motor is characterized by highly non-linear, complex and time-varying dynamics and inaccessibility of some of the states and outputs for measurements. Hence it can be considered as a challenging engineering problem in the industrial sector. Various advanced control techniques has been devised by various researchers across the world. Some of them are based on the neuro-fuzzy techniques. The main advantage of designing the ANFIS coordination scheme is to control the speed of the DSIM to increase the dynamic performance, to provide good stabilization. To show the effectiveness of our scheme, the proposed method was simulated on an electrical system composed of a 4.5 kW six-phase induction machine and its power inverter. Digital simulation results demonstrate that the deigned ANFIS speed controller realize a good dynamic of the DSIM, a perfect speed tracking with no overshoot, give better performance and high robustness.

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Moradian, Mohammadreza, Jafar Soltani, Gholam Reza Arab Markadeh, Hossein Shahinzadeh, and Yassine Amirat. "A New Grid-Connected Constant Frequency Three-Phase Induction Generator System under Unbalanced-Voltage Conditions." Electronics 10, no. 8 (April 14, 2021): 938. http://dx.doi.org/10.3390/electronics10080938.

Повний текст джерела

Анотація:

This paper presents a new constant frequency, direct grid-connected wind-based induction generator system (IGS). The proposed system includes a six-phase cage rotor with two separate three-phase balanced stator windings and a three-phase SV-PWM inverter which is used as a STATCOM. The first stator winding is connected to the STATCOM and is used to excite the machine. The main frequency of the STATCOM is considered to be constant and equal to the main grid frequency. In the second stator winding, the frequency of the induced emf is equal to the constant frequency, so the generator output frequency is independent of the load power demand and its prime mover speed. The second stator winding is directly connected to the main grid without an intermediate back-to-back converter. In order to regulate the IGS output active and reactive power components, a sliding mode control (SMC) is designed. Assuming unbalanced three-phase voltages for the main grid, a second SMC is developed to remove the machine output’s negative sequence currents. Moreover, a conventional PI controller is used to force the average exchanging active power between the machine and STATCOM to zero. This PI controller generates the reference value of the rotor angular speed. An adjustable speed pitch angle-controlled wind turbine is used as the IGS’s prime mover. The effectiveness and capability of the proposed control scheme have been supported by the simulation results.

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Batista Lopes Gonçalves Junior, João, Livia Da Silva Oliveira, David Barbosa de Alencar, and Jorge De Almeida Brito Junior. "Electric Energy Reuse of Plastic Injection Machine Motors for Lighting Circuit in a Manaus-Amazonas Industrial Pole Company." International Journal for Innovation Education and Research 7, no. 10 (October 31, 2019): 637–45. http://dx.doi.org/10.31686/ijier.vol7.iss10.1810.

Повний текст джерела

Анотація:

This work aims to reuse the electric energy used in three-phase induction motors of an industrial plastic injector for the lighting circuit of the same warehouse where the injectors are located, thus eliminating the need to use the energy of the electric company. Any resource that reuses electricity with better efficiency becomes essential today, making it a solution for industries that are thinking of saving the energy used in the productive processes in the manufacture of goods.This project uses a synchronous generator coupled to a three-phase induction motor of a plastic injector, which will reuse the electrical energy used of the induction motor to mechanically drive the synchronous generator, that will be able to generate enough electrical power in its coils for a 47-light shed lighting circuit, thus eliminating the need to use utility power, saving a portion of the energy usage costs on the monthly bill. This installation of the synchronous generator was performed on equipment of the company Moto Honda da Amazônia, which has a 24-hour operating regime for six days a week.

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Ai, Yong-Le, Maarten J. Kamper, and Abraham D. Le Roux. "Novel Direct Flux and Direct Torque Control of Six-Phase Induction Machine With Nearly Square Air-Gap Flux Density." IEEE Transactions on Industry Applications 43, no. 6 (2007): 1534–43. http://dx.doi.org/10.1109/tia.2007.908157.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Wang, Chenchen, Kun Wang, and Xiaojie You. "Research on Synchronized SVPWM Strategies Under Low Switching Frequency for Six-Phase VSI-Fed Asymmetrical Dual Stator Induction Machine." IEEE Transactions on Industrial Electronics 63, no. 11 (November 2016): 6767–76. http://dx.doi.org/10.1109/tie.2016.2585459.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Huang, Yi, and Clemens Gühmann. "Temperature estimation of induction machines based on wireless sensor networks." Journal of Sensors and Sensor Systems 7, no. 1 (April 16, 2018): 267–80. http://dx.doi.org/10.5194/jsss-7-267-2018.

Повний текст джерела

Анотація:

Abstract. In this paper, a fourth-order Kalman filter (KF) algorithm is implemented in the wireless sensor node to estimate the temperatures of the stator winding, the rotor cage and the stator core in the induction machine. Three separate wireless sensor nodes are used as the data acquisition systems for different input signals. Six Hall sensors are used to acquire the three-phase stator currents and voltages of the induction machine. All of them are processed to root mean square (rms) in ampere and volt. A rotary encoder is mounted for the rotor speed and Pt-1000 is used for the temperature of the coolant air. The processed signals in the physical unit are transmitted wirelessly to the host wireless sensor node, where the KF is implemented with fixed-point arithmetic in Contiki OS. Time-division multiple access (TDMA) is used to make the wireless transmission more stable. Compared to the floating-point implementation, the fixed-point implementation has the same estimation accuracy at only about one-fifth of the computation time. The temperature estimation system can work under any work condition as long as there are currents through the machine. It can also be rebooted for estimation even when wireless transmission has collapsed or packages are missing.

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Tousizadeh, Mahdi, Amirmehdi Yazdani, Hang Seng Che, Hai Wang, Amin Mahmoudi, and Nasrudin Abd Rahim. "A Generalized Fault Tolerant Control Based on Back EMF Feedforward Compensation: Derivation and Application on Induction Motors Drives." Energies 16, no. 1 (December 21, 2022): 51. http://dx.doi.org/10.3390/en16010051.

Повний текст джерела

Анотація:

In this paper, a fault-tolerant three-phase induction drive based on field-oriented control is studied, and an analytical approach is proposed to elucidate the limitations of FOC in flux-torque regulation from the controller perspective. With an open-phase fault, the disturbance terms appear in the controller reference frame and degrade the controller performance when operating in a d-q plane with DC quantities. In addition, the hardware reconfiguration, which is essential to operate faulted three-phase drives, causes substantial change in the way the control parameters vd, vq are reflected onto the machine terminals. An accurate understanding of the feedforward term, by considering the open-phase fault and the hardware modifications, is provided to re-enable the FOC in presence of an open-phase fault. Furthermore, the concept of feedforward term derivation is generically extended to cover multiphase induction drives encountering an open-phase fault whereby no hardware reconfiguration is intended. The proposed method is explained based on a symmetrical six-phase induction and can be extended to drives with a higher number of phases. The effectiveness of the proposed derivation method, which is required to form a feedforward fault-tolerant controller, is verified and compared through the simulation and experiment, ensuring smooth operation in postfault mode.

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Lallouani, Hellali, Belhamdi Saad, and Benyettou Letfi. "DTC-SVM based on Interval Type-2 Fuzzy Logic Controller of Double Stator Induction Machine fed by Six-Phase Inverter." International Journal of Image, Graphics and Signal Processing 11, no. 7 (July 8, 2019): 48–57. http://dx.doi.org/10.5815/ijigsp.2019.07.04.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Kali, Yassine, Maarouf Saad, Jesus Doval‐Gandoy, Jorge Rodas, and Khalid Benjelloun. "Discrete sliding mode control based on exponential reaching law and time delay estimation for an asymmetrical six‐phase induction machine drive." IET Electric Power Applications 13, no. 11 (October 8, 2019): 1660–71. http://dx.doi.org/10.1049/iet-epa.2019.0058.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Kutsyk, Andriy, Mariusz Korkosz, Mykola Semeniuk, Piotr Bogusz, Andriy Lozynskyy, Jacek Kozyra, and Zbigniew Łukasik. "Electromagnetic and Electromechanical Compatibility Improvement of a Multi-Winding Switch Control-Based Induction Motor—Theoretical Description and Mathematical Modeling." Energies 15, no. 21 (October 28, 2022): 8038. http://dx.doi.org/10.3390/en15218038.

Повний текст джерела

Анотація:

The main advantages of multi-winding (multiphase) induction machines include reducing torque ripple, decreasing rotor harmonics losses, reducing the current per phase without increasing the voltage per phase, reducing the current harmonics of the DC voltage source, and high fault tolerance. The authors propose a theoretical description for the harmonic content of the DC-link current, magnetomotive force, and electromagnetic torque of a multi-winding induction machine (IM), and an account of the interaction of the time harmonics for the power supply and the spatial harmonics for winding functions is presented. The proposed theoretical analysis has made it possible to substantiate supply-winding schemes for the compensation of higher harmonics (6th and 12th in the DC-link current and the IM’s electromagnetic torque) and the improvement of the electromagnetic and electromechanical compatibility of the multi-winding machine, which are justified according to the proposed theoretical description. Further, a schematic solution for the multi-winding induction motor with electronic changing of the pole number is proposed to provide a reduction in speed ripples at low rotation speeds. This decrease is ensured by increasing the number of pole pairs and increasing the frequency of the supply voltage. Mathematical models of multi-winding switch control-based induction machines are developed using the method of average voltages in the integration step for an investigation of electromagnetic and electromechanical processes. It is shown that the developed models are distinguished by high speed of response and accuracy. This is confirmed by the comparative analysis using known methods and models in the Matlab environment, as well as a comparison of the simulation results with the known results of physical experiments. The results of mathematical modeling show that the use of a multi-winding IM with appropriate supply-winding schemes stands to significantly reduce the ripples of the IM’s electromagnetic torque and DC-link current in the case of using six-step voltage source inverters. This makes this type of inverter suitable for use in a frequency-controlled electric drive as an alternative to using a PWM inverter, which has a negative influence on the IM’s state.

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!