Добірка наукової літератури з теми "Sistemi grid connected"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Sistemi grid connected".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Sistemi grid connected"
Ramos-Paja, Andrés, Andrés Julián aavedra-Montes, and Juan David Bastidas-Rodríguez. "Control en cuatro cuadrantes de un inversor de puente completo conectado a la red eléctrica." Revista UIS Ingenierías 19, no. 1 (January 1, 2020): 117–29. http://dx.doi.org/10.18273/revuin.v19n1-2020012.
Повний текст джерелаRivera-Martínez, Mario Arturo, Geovanni Hernández-Galvez, Omar Sarracino-Martínez, Luis Ixtlilco-Cortés, Alina Juantorena-Ugás, Ulises Ivan Batalla-Nolasco, and David Becerra-García. "Análisis de sensibilidad de sistemas fotovoltaicos conectados a la red eléctrica: Caso de estudio en Guerrero, México." Ingeniería, investigación y tecnología 18, no. 3 (July 1, 2017): 293–305. http://dx.doi.org/10.22201/fi.25940732e.2017.18n3.026.
Повний текст джерелаMohamed, Azah, Zetty Adibah Kamaruzzaman, and Nor Azwan Mohamed Kamari. "Effect of Grid-Connected Photovoltaic Generator on Dynamic Voltage Stability in Power System." Jurnal Kejuruteraan 30, no. 2 (September 1, 2018): 289–96. http://dx.doi.org/10.17576/jkukm-2018-30(2)-20.
Повний текст джерелаArifin Sinaga, Gordon, I. Made Mataram, and Tjok Gede Indra Partha. "Analisis Pembangkit Listrik Sistem Hybrid Grid Connected Di Villa Peruna Saba, Gianyar – Bali." Jurnal SPEKTRUM 6, no. 2 (June 1, 2019): 1. http://dx.doi.org/10.24843/spektrum.2019.v06.i02.p01.
Повний текст джерелаHemalatha, N., and Seyezhai Ramalingam. "MODIFIED CAPACITOR ASSISTED EXTENDED BOOST QUASI Z-SOURCE INVERTER FOR THE GRID-CONNECTED PV SYSTEM." IIUM Engineering Journal 20, no. 1 (June 1, 2019): 140–57. http://dx.doi.org/10.31436/iiumej.v20i1.1042.
Повний текст джерела-, Herwandi. "Implementasi grid tie inverter pada pembangkit listrik tenaga surya on grid untuk golongan pelanggan rumah tangga masyarakat perkotaan." JURNAL ELTEK 19, no. 1 (April 29, 2021): 108. http://dx.doi.org/10.33795/eltek.v19i1.292.
Повний текст джерелаChandra, Aditya, Euis Ismayati, Syariffudien Zuhrie, and Subuh Isnur Haryudo. "Simulasi Grid Connected PV Dengan Fungsi Kompensasi Daya Reaktif PV-Inverter Menggunakan Kontrol ANN." INAJEEE Indonesian Journal of Electrical and Eletronics Engineering 2, no. 1 (May 23, 2019): 22. http://dx.doi.org/10.26740/inajeee.v2n1.p22-28.
Повний текст джерелаBovolini Grigoletto, Felipe, and Humberto Pinheiro. "Flexible Arrangement Of Static Converters For Grid Connected Wind Energy Conversion Systems." Eletrônica de Potência 18, no. 4 (November 1, 2013): 1245–56. http://dx.doi.org/10.18618/rep.2013.4.12451256.
Повний текст джерелаSAODAH, SITI, and SRI UTAMI. "Perancangan Sistem Grid Tie Inverter pada Pembangkit Listrik Tenaga Surya." ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika 7, no. 2 (May 24, 2019): 339. http://dx.doi.org/10.26760/elkomika.v7i2.339.
Повний текст джерелаTambunan, William Dwianugrah, Karnoto Karnoto, and Enda Wista Sinuraya. "ANALISIS POTENSI PENGGUNAAN SUMBER ENERGI LISTRIK DI RUMAH SAKIT MEDIKA DRAMAGA BOGOR." Transient: Jurnal Ilmiah Teknik Elektro 10, no. 3 (September 30, 2021): 413–18. http://dx.doi.org/10.14710/transient.v10i3.413-418.
Повний текст джерелаДисертації з теми "Sistemi grid connected"
Lo, Franco Francesco. "Integrazione di sistemi di accumulo a batterie e impianti fotovoltaici di grande taglia per applicazioni grid-connected." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.
Знайти повний текст джерелаPAREJO, MATOS ANTONIO. "Application of Intelligent Techniques for Optimal Management of Weakly Connected Microgrids." Doctoral thesis, Università degli studi di Genova, 2022. http://hdl.handle.net/11567/1081257.
Повний текст джерелаThe decarbonization and the climate change mitigation have become a priority for many countries and governments. One of the main tools for accomplishing these objectives is the growth of renewable generation sources in the power system, but their inclusion constitutes a great challenge for the network operation due to their high variability and their stochastic behavior. In this context, the management of the power system and microgrids can be treated as optimization problems in which the resources are operated with the aim of minimizing the cost function. This cost function and the corresponding operative restrictions depend on each specific situation, for example, on which are the power consumption requirements, how weak is the connection with the power grid, and how critical are the loads to be fed in the zone. In this sense, despite the large variety of optimization approaches, these have in common the importance of counting on a high-quality forecasting system for predicting the uncertainties of the microgrid (or network) to operate. The main existing approaches for predicting the uncertainties are deterministic and stochastic (which in many cases is also called probabilistic) forecasting. Considering the importance of forecasting systems for performing the optimization of microgrids and, in general, power networks, this doctoral thesis is focused on the design of a microgrid-oriented forecasting framework that includes a wide range of forecasting approaches, which makes possible its integration with other applications, for example, energy management optimization systems. This framework includes several deterministic and stochastic methods and is able to handle the training and selection of the models for performing the forecast according to the type of uncertainty representation that is required in each case.
La descarbonización y la reducción del cambio climático se han convertido en una prioridad para muchos países y gobiernos. Una de las principales herramientas para lograr estos objetivos es aumentar el número de fuentes de generación renovables en el sistema eléctrico, pero su inclusión constituye un gran reto debido a su alta variabilidad y su comportamiento estocástico. En este contexto, la gestión del sistema eléctrico y de las microrredes puede tratarse como problemas de optimización en los que los recursos se operan con el objetivo de minimizar la función de coste. Esta función de coste y las correspondientes restricciones operativas dependen de cada situación concreta, por ejemplo, de cuáles sean las necesidades de consumo de energía, de lo débil que sea la conexión con la red eléctrica y de lo críticas que sean las cargas a alimentar en la zona. En este sentido, a pesar de la gran variedad de enfoques de optimización, éstos tienen en común la importancia de contar con un sistema de predicción de alta calidad para predecir las incertidumbres de la microrred (o red) a optimizar. Los principales enfoques existentes para predecir las incertidumbres son la predicción determinista y la estocástica (que en muchos casos también se denomina probabilística). Teniendo en cuenta la importancia de los sistemas de predicción para realizar la optimización de las microrredes y, en general, de las redes eléctricas, esta tesis doctoral se centra en el diseño de un marco de trabajo para predicción orientado a las microrredes que incluye diversos enfoques para realizar la predicción, lo que hace posible su integración con otras aplicaciones como, por ejemplo, sistemas de optimización de gestión energética. Este marco de trabajo incluye varios métodos deterministas y estocásticos y es capaz de gestionar el entrenamiento y la selección de los modelos para realizar la predicción según el tipo de representación de la incertidumbre que se requiera en cada caso.
Destro, Nicola. "Ottimizzazione dei sistemi di accumulo dell'energia, con particolare attenzione agli impianti di pompaggio connessi alla rete." Doctoral thesis, Università degli studi di Padova, 2016. http://hdl.handle.net/11577/3424756.
Повний текст джерелаNegli ultimi anni si è assistito ad una crescente produzione di energia da fonti rinnovabili intermittenti e alla necessità di un adeguamento dei sistemi elettrici per consentire una maggiore integrazione della produzione intermittente nella rete. L’elevato sfruttamento delle fonti energetiche rinnovabili nei sistemi di piccola e grande dimensione passa anche attraverso l’impiego di diverse tecnologie di accumulo. Nella prima parte della tesi sono analizzati i diversi servizi che possono offrire i sistemi di accumulo. In particolar modo, si ricordano servizi quali il time shift e l’integrazione di fonti rinnovabili che ben si adattano ad impianti di elevata capacità, oltre ai servizi come la qualità del servizio che si adattano ad impianti di piccola capacità. Sono inoltre analizzati i più comuni sistemi di accumulo dell’energia evidenziandone campi di applicazione, costi e sviluppi futuri. L’analisi approfondita della integrazione delle fonti rinnovabili nei sistemi deve essere condotta attraverso metodi di ottimizzazione e per questa ragione sono analizzati due algoritmi di tipo stocastico successivamente applicati allo studio dei sistemi. I diversi sistemi energetici analizzati sono di tipo sia non connesso che connesso alla rete elettrica. Inizialmente per studiare i sistemi è applicato il metodo degli energy hub che ben si presta a rappresentare sistemi complessi. Tale metodo è applicato ad un sistema di grandi dimensioni connesso alla rete che richiede energia elettrica e termica durante tutto l’anno. L’obiettivo dell’analisi è quello di determinare il funzionamento ottimale delle macchine al fine di ridurre i costi annuali. Le indagini continuano con l’analisi di un sistema di piccole dimensioni isolato dalla rete che deve soddisfare due richieste dell’utenza, è dotato di impianti per lo sfruttamento delle fonti energetiche locali abbinati ad accumuli. L’obiettivo dell’analisi è quello di determinare la gestione ottimale del sistema energetico per ridurre i costi di gestione del sistema. Le indagini proseguono con l’analisi di un sistema di grandi dimensioni isolato dalla rete che deve soddisfare molteplici richieste dell’utenza, è dotato di impianti per lo sfruttamento delle fonti energetiche locali abbinati a molteplici accumuli. L’obiettivo dell’analisi è quello di determinare la dimensione delle macchine installate e la gestione ottimale del stesse al fine di contenere i costi complessivi del sistema. L’analisi si sposta poi verso i sistemi di accumulo connessi alla rete elettrica, in particolar modo verso gli impianti ad aria compressa e agli impianti di pompaggio idroelettrico. Il sistema ad aria compressa è analizzato attraverso un modello di simulazione annuale in due scenari di utilizzo: come impianto di accumulo indipendente connesso alla rete elettrica e come impianto operante in coordinamento con un parco eolico. L’obiettivo per i due scenari di funzionamento è quello di massimizzare i guadagni dell’impianto di accumulo operante nel mercato elettrico. I sistemi di accumulo idroelettrici sono stati analizzati grazie ad una collaborazione presso un istituto di ricerca norvegese. Le indagini hanno riguardato tre impianti di pompaggio ripotenziati e operanti in coordinamento con sistemi eolici off-shore nel Mare del Nord. Le indagini hanno individuato nuove strategie di gestione degli impianti idroelettrici utili al livellamento della produzione eolica in abbinamento al rispetto dei vincoli ambientali sull’utilizzo delle riserve idroelettriche. Le analisi condotte hanno permesso di verificare come i sistemi di accumulo possano trovare applicazioni nella integrazione delle fonti rinnovabili nel breve e nel lungo termine, in applicazioni presso l’utente finale e presso la generazione. Le direzioni di ricerca principali puntano verso una maggiore indagine nelle tecniche dei gestione e maggiore ricerca sui singoli componenti attraverso programmi di ricerca sempre più integrati e completi.
GuimarÃes, JÃssica Santos. "Wind energy conversion system connected to the grid." Universidade Federal do CearÃ, 2016. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=16813.
Повний текст джерелаEste trabalho apresenta o desenvolvimento de um sistema de conversÃo de energia eÃlica (WECS - Wind Energy Conversion System) com gerador sÃncrono de imà permanente (PMSG - Permanent Magnet Synchronous Generator) operando com velocidade variÃvel. O circuito de processamento de energia à dividido em dois estÃgios. No estÃgio AC-DC, uma topologia boost bridgeless trifÃsica unidirecional absorve a energia fornecida pelo gerador e injeta no link DC. Neste conversor, a tÃcnica de autocontrole permite a extraÃÃo de corrente com baixa taxa de distorÃÃo harmÃnica (THD â Total Harmonic Distortion) e alto fator de potÃncia. AlÃm disso, um algoritmo de rastreamento do mÃximo ponto de potÃncia (MPPT - Maximum Power Point Tracking) determina a velocidade de rotaÃÃo do gerador que irà garantir o ponto adequado de operaÃÃo. Este modo de operaÃÃo à mantido enquanto a potÃncia disponÃvel for menor que a potÃncia nominal do conversor. Caso contrÃrio, o algoritmo de MPPT à desabilitado e uma malha de controle de potÃncia mecÃnica garante a condiÃÃo nominal de potÃncia. No estÃgio de conversÃo DC-AC, um inversor trifÃsico ponte completa, cujo controle à baseado na teoria das potÃncias instantÃneas, provà energia à rede elÃtrica cumprindo com as exigÃncias normativas. Uma anÃlise teÃrica completa à apresentada assim como os resultados de simulaÃÃo considerando o protÃtipo com a potÃncia nominal de 6 kW equivalente a turbina eÃlica utilizada. Resultados experimentais satisfatÃrios sÃo apresentados para uma potÃncia de 3 kW: o rendimento do sistema completo à superior a 90%; a corrente que circula no gerador apresenta THD de aproximadamente 2,6% e fator de potÃncia de 0,942; e a corrente injetada na rede elÃtrica possui THD de 1,639% e fator de potÃncia de 0,994.
This master thesis presents the development of a Wind Energy Conversion System (WECS) with Permanent Magnet Synchronous Generator (PMSG) operating at variable speed. The energy processing circuit is divided into two stages. In the AC-DC stage, an unidirectional three-phase bridgeless boost topology absorbs the energy supplied by the generator and injects it into the DC link. In this converter, the self-control technique allows the current extraction with low THD and high power factor. Furthermore, a - Maximum Power Point Tracking (MPPT) determines the rotational speed of the generator that will ensure the proper operating point. This mode of operation is maintained while the available power remains lower than the converter rated power. Otherwise, the MPPT algorithm is disabled and a mechanical power control loop ensures the rated power condition. On the DC-AC conversion stage, a three-phase full-bridge inverter, whose control is based on the theory of instantaneous power, provides energy to the grid complying with regulatory requirements. A complete theoretical analysis is presented as well as the simulation results considering the prototype with a rated power of 6 kW equivalent of wind turbine used. Satisfactory experimental results are shown to an output of 3 kW: the efficiency of the total system is above 90%; the current through the generator has a THD of about 2.6% with a power factor of 0.942; moreover, the current injected into the grid has a THD of about 1.639% and a power factor of 0.994.
Graziani, Alessandro. "Methods and tools for the optimization of renewable technologies and hybrid energy systems. Metodi e strumenti per l'ottimizzazione di tecnologie rinnovabili e sistemi energetici ibridi." Doctoral thesis, Università degli studi di Padova, 2015. http://hdl.handle.net/11577/3423884.
Повний текст джерелаIl progetto delle Nazioni Unite "Sustainable energy for all" ha fissato tre obiettivi ambiziosi per favorire uno sviluppo sostenibile e limitare l'impatto del cambiamento climatico: - Accesso universale a moderni servizi elettrici. Tali servizi sono attualmente indisponibili per circa 1.3 miliardi di persone ed è previsto un aumento del 40% della domanda globale di energia elettrica entro il 2040, a causa dell'incremento della popolazione mondiale e delle economie in crescita nei paesi in via di sviluppo - Raddoppio del tasso globale di miglioramento dell'efficienza energetica - Raddoppio del contributo di fonti di tipo rinnovabile nel mix energetico globale Inoltre, lo scenario climatico proposto nel "fifth assessment report (AR5)" redatto da "International Panel on Climate Change (IPCC)" stabilisce la necessità di ridurre l'emissione di gas ad effetto serra del 40-70%, rispetto ai valori registrati nel 2010, entro il 2050 ed eliminarli in modo quasi definitivo entro la fine del secolo con lo scopo di evitare effetti climatici indesiderati. Il raggiungimento di tali obiettivi richiede e incoraggia la diffusione di fonti energetiche rinnovabili (FER) all'interno del mix energetico globale, rimpiazzando gradualmente le fonti di energia convenzionali basate su combustibili fossili, inquinanti e in via di esaurimento, che hanno ancora l'incidenza principale nel settore energetico. A seguito nel loro sviluppo tecnologico e la crescente competitività nel mercato, le FER rivestono già un ruolo fondamentale nel mix energetico di numerose Nazioni ricoprendo il 22.1% del fabbisogno globale di energia nel 2013 e mostrando un andamento in rialzo nel 2014 (REN, 2014). Tuttavia, sono ancora cruciali politiche di supporto, ingenti investimenti privati e contributi della comunità scientifica per dimostrare l'efficacia e la sostenibilità tecnica ed economica delle FER e favorire, quindi, una loro diffusione in larga scala. In questo contesto, la seguente tesi di dottorato è rivolta allo studio, progettazione e sviluppo di metodi e strumenti per l'ottimizzazione e la valorizzazione di tecnologie energetiche rinnovabili e la loro integrazione efficace con fonti di produzione di energia convenzionali alimentate da combustibili fossili e sistemi di accumulo di energia (Sistemi energetici di tipo ibrido). I contributi scientifici disponibili in letteratura e l'analisi dei diversi scenari e delle prospettive delle FER nei vari contesti nazionali ed internazionali hanno dimostrato che la loro sostenibilità economica, e quindi la loro diffusione, è strettamente legata ad una serie di parametri tecnici, economico / finanziari e geografici. Tali parametri sono stati impiegati come input in due modelli analitici sviluppati per la progettazione tecnico-economica di impianti fotovoltaici (FV) e micro turbine eoliche e applicati per lo studio della loro fattibilità economica, attraverso analisi multi-scenario, in alcuni dei maggiori Paesi Europei. I risultati ottenuti hanno mostrato come l'autoconsumo dell'energia prodotta rivesta un ruolo fondamentale nella redditività economica dei citati impianti ed, in particolare, a seguito del taglio parziale o totale dei sistemi di incentivazione e l'incertezza attorno alle politiche di supporto all'interno del panorama Europeo. Lo studio specifico del profilo di domanda elettrica delle utenze e l'impiego di sistemi di accumulo di energia sono stati identificati come strategie efficaci al fine di incrementare la quota di autoconsumo. Tali considerazioni hanno portato allo sviluppo di un modello analitico utile alla progettazione tecnico-economica un sistema energetico ibrido connesso alla rete Nazionale integrante un impianto FV e un sistema di accumulo a batterie. La redditività del sistema, valutata su un caso reale, risulta comparabile a un impianto fotovoltaico privo di batterie in caso di un gap significativo tra il costo dell'energia elettrica acquistata dalla rete e il prezzo di vendita dell'energia elettrica ceduta in rete. Tuttavia, gli elevati costi dovuti all'acquisto iniziale e alle attività di manutenzione, e l'eventuale incentivazione sulla vendita dell'energia in rete, non rendono l'investimento particolarmente attrattivo per impianti connessi alla rete. L'attenzione si è quindi rivolta all'analisi tecnico-economica di sistemi energetici ibridi non connessi alla rete, comunemente definiti in isola o off-grid, per soddisfare il fabbisogno energetico di utenti in area remote e quindi prive di allaccio a una rete elettrica. In tali sistemi, i sistemi di accumulo a batterie, oltre alla capacità di accumulo dell'energia prodotta in eccesso variabili e intermittenti FER, hanno funzioni fondamentali nella gestione del sistema stesso. L'attività è stata anche rafforzata da un'applicazione industriale per la configurazione, test e installazione di due sistemi energetici ibridi in isola impiegati per soddisfare il fabbisogno energetico di un villaggio e di un sistema di telecomunicazione situati in aree remote. In parallelo, sono state svolte due attività sperimentali applicate alla promettente, ma non ancora completamente sviluppata a livello industriale, tecnologia solare a concentrazione. La prima attività riguarda la progettazione, sviluppo e test sperimentali di un prototipo in scala ridotta di concentratore solare a lenti di Fresnel per la produzione distribuita di energia elettrica, mediante l'uso di celle fotovoltaiche multi giunzione, ed energia termica a bassa temperatura, tramite un sistema di recupero termico. La seconda attività concerne lo sviluppo e test sperimentali di un prototipo di sistema di accumulo termico per impianti termodinamici alimentati da sistemi a concentrazione solare. Il sistema di accumulo consente di compensare la natura intermittente e variabile della fonte solare incrementando le ore di funzionamento dell'impianto termodinamico con i conseguenti benefici economici. Concludendo, la presente tesi di dottorato include la descrizione di metodi e strumenti per l'ottimizzazione e valorizzazione delle FER. I risultati evidenziano le criticità e potenzialità dei sistemi studiati con lo scopo di contribuire a una loro diffusione e favorire uno sviluppo sostenibile
Neto, Aime Fleury de Carvalho Pinto. "Qualificação e etiquetagem de inversores para sistemas fotovoltaicos conectados à rede." Universidade de São Paulo, 2012. http://www.teses.usp.br/teses/disponiveis/86/86131/tde-28062012-174659/.
Повний текст джерелаThis work presents the development of a methodology for qualification and labeling of inverters for grid-connected photovoltaic systems, aiming serving as procedural proposal for inclusion in the Conformity Assessment Rules of Equipments and Photovoltaic Systems of the Brazilian Labeling Program. The developed procedure evaluates the inverters efficiency, power quality, protections and operational and installation information.
Massi, Pavan Alessandro. "A hardware field simulator for photovoltaic materials applications." Doctoral thesis, Università degli studi di Trieste, 2008. http://hdl.handle.net/10077/2757.
Повний текст джерелаIl presente lavoro riguarda la descrizione di un simulatore di campo fotovoltaico (in seguito simulatore). Il simulatore è un convertitore elettronico di potenza che, alimentato dalla rete elettrica, riproduce la caratteristica tensione corrente di un campo fotovoltaico (insieme di moduli fotovoltaici connessi in serie e in parallelo) operante in condizioni climatiche di temperatura e irraggiamento arbitrarie. Il nuovo dispositivo verrà impiegato nell’ambito del laboratorio fotovoltaico cui fa riferimento l’impianto in via di realizzazione sul tetto dell’edificio che ospita il Dipartimento dei Materiali e delle Risorse Naturali dell’Università di Trieste. Il simulatore viene proposto come utile strumento per i progettisti di dispositivi solari funzionanti in sistemi fotovoltaici connessi in rete. In particolare, il simulatore permetterà di prevedere il funzionamento di nuovi moduli fotovoltaici operanti in condizioni di ombreggiamento arbitrario e inseriti in un sistema fotovoltaico reale. L’uso del simulatore sarà particolarmente efficace nel caso di simulazioni di tecnologie in film sottile come, ad esempio, il silicio amorfo, il tellururo di cadmio, ecc. Il simulatore sarà anche necessario per testare i componenti che fanno parte di un sistema fotovoltaico connesso in rete, con particolare riferimento ai sistemi di condizionamento della potenza (detti anche inverter). Tali sistemi, oltre a convertire la tensione continua prodotta dai moduli fotovoltaici in una tensione compatibile e sincronizzata con quella della rete, devono garantire istante per istante l’inseguimento del punto di massima potenza estraibile dal campo fotovoltaico cui sono connessi. Il lavoro è stato suddiviso in cinque capitoli. Il primo capitolo fornisce una breve descrizione dello stato dell’arte e di alcune aspetti economici relativi alla tecnologia fotovoltaica. Nel secondo capitolo vengono richiamati il modello classico di una cella solare e le definizioni riguardo le sue caratteristiche principali (punto di massima potenza, efficienza, fill factor, ecc.). Nello stesso capitolo un’overview sui materiali e sulle tecnologie utilizzate nella realizzazione dei dispositivi fotovoltaici divide, come suggerito da Martin Green, le celle solari in tre diverse generazioni: la prima comprende i dispositivi realizzati in silicio cristallino (mono e policrisallino), la seconda quelli in film sottile (in silicio amorfo, tellururo di cadmio CdTe, diseleniuro di rame e indio CIS, diseleniuro di rame, indio e gallio CIGS, diseleniuro di rame, indio, gallio e zolfo CIGSS) e le celle di Graetzel, e la terza le celle multigiunzione, a banda intermedia e quelle organiche. Nel capitolo tre viene fornita una descrizione dei componenti costituenti un sistema fotovoltaico connesso in rete e viene proposto un nuovo metodo per la determinazione delle caratteristiche corrente tensione e potenza tensione prodotte da dispositivi fotovoltaici. Il metodo risulta efficace in quanto non necessita di misure sperimentali da effetture sui diversi dispositivi. I dati forniti nei comuni data sheet che vengono forniti a corredo dei moduli fotovoltaici sono sufficienti a determinarne il comportamento al variare della temperatura di funzionamento e del livello di radiazione solare. L’efficienza di un sistema fotovoltaico (Balance Of the System, BOS) viene calcolata nel capitolo quattro. Particolare enfasi viene data all’effetto di mismatching che è tanto più importante quanto più è elevato il livello di ombreggiamento presente sul piano dei moduli fotovoltaici costituenti l’impianto. Infine, l’ultimo capitolo riguarda la descrizione del simulatore e delle sue applicazioni.
The subject of this work is a power electronic device, hereafter named photovoltaic field simulator, which converts the grid voltage into a current voltage characteristic. This characteristic replicates the behavior of a real photovoltaic field working in arbitrary conditions of irradiance and temperature. After building, the photovoltaic field simulator will be used in the photovoltaic laboratory which is connected to the experimental photovoltaic plant which will be installed on the roof top of the Materials and Natural Resources Department of Trieste University. The photovoltaic field simulator will be used for photovoltaic module parameters design with particular reference to its behavior when inserted in a photovoltaic field operating under shaded conditions. The use of the simulator will be particularly effective when simulating thin-film technologies as, for example, amorphous silicon, cadmium telluride, and etc. The photovoltaic field simulator will also be used for testing the components of grid connected photovoltaic systems with particular reference to the power conditioning units (also named inverters). These systems, which convert the direct current produced by the photovoltaic modules into a utility grade current (typically alternate and sinusoidal at a frequency of 50-60Hz), must extract maximum power from the photovoltaic field. The work is divided into five chapters. In the first a brief description of photovoltaic technology and its economic aspects is given. Chapter two is on classic solar cell modelling basics and on the definition of the parameters of photovoltaic technology (maximum power point, efficiency, fill factor, and etc.). In the same chapter a materials and technologies overview splits, as suggested by Martin Green, solar cells in three different generations: the first comprises crystalline silicon (mono and polycrystalline) devices, the second thin-film devices (amorphous silicon, cadmium telluride CdTe, copper indium diselenide CIS, copper indium gallium diselenide CIGS, copper indium gallium sulphur diselenide CIGSS), and the Graetzel cells, while the third multi-junction, intermediate band and organic photovoltaic devices. The third chapter briefly describes photovoltaic grid connected system components. In particular a new model for plotting photovoltaic current voltage and power voltage characteristics is provided. The method is original because only module data sheet parameters are used and experimental measurements are not needed in order to determine the photovoltaic modules behavior with reference to irradiance and working temperatures changes. In chapter four the Balance of a photovoltaic System (BOS) is calculated. In particular the importance of the mismatching effect of photovoltaic modules due to shaded conditions is shown. The last chapter is on simulator description and its applications.
XX Ciclo
1975
Lanas, Montecinos Fernando José, and Estevez Guillermo Jiménez. "Design of a robust energy management system for a grid-connected microgrid providing services." Tesis, Universidad de Chile, 2019. http://repositorio.uchile.cl/handle/2250/172645.
Повний текст джерелаSe define una microrred como una agrupación de cargas y recursos energéticos distribuidos que funciona como un único sistema controlable, capaz de operar en paralelo o aislado de la red eléctrica. Las microrredes son proveedores de energía locales que pueden reducir los gastos de energía, reducir las emisiones, aumentar la confiabilidad y son alternativas de energización emergentes. El correcto uso de sus recursos energéticos disponible permite lograr una operación más eficiente en una microrred, por ejemplo; reducir sus costos, mejorar ingresos, alargar la vida útil de los equipos y limitar el impacto ambiental. Algunos de estos objetivos se contraponen y es por esto que es necesario compensarlos para obtener el mejor despacho energético. Por esta razón el uso de un sistema de gestión de energía para microrredes cobra gran importancia. En este trabajo se desarrollaron modelos matemáticos y luego se implementaron en una herramienta computacional para el despacho energético óptimo de microrredes, con énfasis en tres aspectos. Primero, los servicios complementarios que una microrred puede ofrecer: arbitraje de energía, reducción de emisiones, reducción de potencia punta, reserva de potencia en giro y ofertas de reducción de consumo. Segundo, un modelo de almacenamiento de baterías enfocado en seis fenómenos: envejecimiento cíclico y calendario, la ley de Peukert, la pérdida de capacidad, autodescargas y la limitación de carga/descarga. Tercero, se incluye un módulo maestro-esclavo para lidiar con la estocasticidad ante problemas intempestivos en la red, manteniendo así la confiabilidad de la microrred cuando se aísla, aun si esta ofrece servicios. Estos tres aspectos son integrados en un modelo de programación lineal entera mixta para el despacho óptimo de una microrred, minimizando los costos de operación y reinversión. En el presente trabajo, se simulan la operación de tres microrredes reales bajo diferentes escenarios cada uno. El primer caso es la microrred aislada de Huatacondo, el segundo es la microrred conectada de CIGRE y el tercero es la microrred conectada de la cárcel de Santa Rita. Los resultados obtenidos muestran reducción en los costos de hasta 4.3% en la microrred de Huatacondo, hasta 2.9% para CIGRE y hasta 7% para Santa Rita al considerar servicios y utilizando un modelo detallado de almacenamiento. En el caso de la microrred aislada de Huatacondo, la reducción se basó principalmente en la extensión de la vida útil del banco de baterías. Para las dos microrredes conectadas los servicios más atractivos fueron ofrecer sus capacidades flexibles no utilizadas a la red. Esto considera servicios como reducción de consumo, reducción de demanda punta o reserva en giro. Servicios enfocados en transferencia de altos volúmenes de energía, como el arbitraje de energía, no fueron atractivos dado el costo asociado al uso de equipos de almacenamiento.
Schenkel, Gabriela. "Monitoramento e análise de um sistema fotovoltaico conectado à rede com uso de microinversor." Universidade do Vale do Rio dos Sinos, 2015. http://www.repositorio.jesuita.org.br/handle/UNISINOS/4909.
Повний текст джерелаMade available in DSpace on 2015-10-26T16:05:56Z (GMT). No. of bitstreams: 1 Gabriela Schenkel_.pdf: 3048283 bytes, checksum: cd479115e88afd207554abd627ee1c17 (MD5) Previous issue date: 2015-02
CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Os sistemas fotovoltaicos conectados à rede tem como finalidade a conversão da energia solar em energia elétrica. No Brasil, recentemente foi dado o primeiro passo efetivo com a publicação pela ANEEL da Resolução Normativa n° 482. Esta resolução, publicada em 17 de abril de 2012, possibilita à um consumidor doméstico e comercial possuir um sistema de microgeração de energia (hidráulica, solar, eólica, biomassa ou cogeração qualificada) conectado à rede elétrica e fazer compensação de energia. Neste trabalho foi instalado em caráter experimental, no Laboratório de Energias Renováveis da Unisinos, um sistema fotovoltaico conectado à rede com uso de um modelo de microinversor, e buscou-se por meio desta instalação e do monitoramento, analisar o comportamento elétrico e energético do sistema. O sistema é composto por um módulo monocristalino LG255S1C de 255 Wp conectado a um microinversor ENPHASE M215 de 215 W. O período de monitoramento foi de 1° de agosto até 20 de dezembro de 2014. Uma central de aquisição de dados Agilent HP 34970A foi empregada para coletar dados de irradiância no plano do gerador fotovoltaico, corrente e tensão na entrada e saída do microinversor, temperatura de uma célula FV no centro do módulo fotovoltaico e temperatura no dissipador do microinversor. Também foi utilizado como medidor o analisador de energia Fluke 43B, que coleta os dados de potência ativa, potência reativa e potência aparente injetada na rede elétrica pelo sistema. Índices de qualidade de energia como a distorção harmônica total de corrente e fator de deslocamento também foram medidos. A eficiência média diária máxima, considerando a incerteza, medida no microinversor empregado foi de 95,18 % e é semelhante aos valores de eficiência média diária dos microinversores de primeira e segunda geração. O sistema fotovoltaico monitorado com o uso do microinversor atingiu o valor máximo de desempenho global de 0,93. A produção de energia máxima diária em corrente alternada foi de 1,49 kWh. Estima-se, levando em consideração este valor, que a produção mensal pode ser de até 44,7 kWh. Isto significa uma redução de 58 % no consumo de energia em uma residência, levando em consideração o custo de disponibilidade e o sistema instalado em uma residência com consumo médio mensal da região nordeste que é de 120 kWh.
Photovoltaic grid-connected systems aims the conversion of solar energy into electrical energy. In Brazil, was recently given the first effective step with the publication by ANEEL Normative Resolution No. 482. This resolution published on 17 th April, 2012, enables domestic and commercial consumers have an energy microgeneration system (hydro, solar, wind, biomass or qualified cogeneration) connected to mains power and make compensation. In this work was mounted on an experimental character, in the Renewable Energy Laboratory of Unisinos, a photovoltaic grid-connected system that uses a microinverter model, and through this installation and monitoring, analyse the electrical and energetical behavior of the system. The system consists of a 255 Wp LG255S1C monocrystalline module, connected to a 215 W ENPHASE M215 microinverter. The monitoring period was 1 st August to 20 th December, 2014. A central acquisition of Agilent HP 34970A data was used to collect data irradiance in the plane of the PV array, current and voltage at the input and output of microinverter, temperature of a PV cell in the center of the PV module and the microinverter sink. It was also used as a measuring the energy analyzer Fluke 43B, which collects the data of active power, reactive power and apparent power injected into the grid by the system. Power quality indices as the total harmonic current distortion and displacement factor were also measured. The maximum daily average efficiency, considering the uncertainty, measured on the employed microinverter was 95.18 % and is similar than the daily average efficiency values of microinverters of first and second generation. The photovoltaic system monitored using the microinverter peaked overall performance of 0.93. The production maximum daily energy into alternating current was 1.49 kWh. It is estimated taking into account the value that the monthly production can achieved 44.7 kWh. This means a reduction of 58 % in the consumption of a residence considering the availability cost and that the system is installed in a residence with the northest comsumption whose the average monthly consumption is 120.00 kWh.
Almeida, Marcelo Pinho. "Qualificação de sistemas fotovoltaicos conectados à rede." Universidade de São Paulo, 2012. http://www.teses.usp.br/teses/disponiveis/86/86131/tde-28062012-102236/.
Повний текст джерелаThis work proposes a procedure for qualifying grid-connected photovoltaic systems, which has two main focuses: the commissioning and the characterization of energy production. The work also summarizes some regulatory aspects related to photovoltaic systems, presents the main parameters used to characterize the performance of a photovoltaic system, proposes a methodology to calculate the energy injected into the grid, which incorporates both new and conventional mathematical models and measurement procedures, and applies this methodology to a case of study of a real photovoltaic system.
Тези доповідей конференцій з теми "Sistemi grid connected"
E. G. Ogoulola, Christel, Angelo J. J. Rezek, Robson B. Gonzatti, Vinicius Z. Silva, Marcos L. Ramos, Elio C. Alfonso, and Raynel D. Santos. "A New Bidirectional Three-phase Neutral Point Clamped (NPC) Grid-Connected Converter: Analysis and Simulation." In Simpósio Brasileiro de Sistemas Elétricos - SBSE2020. sbabra, 2020. http://dx.doi.org/10.48011/sbse.v1i1.2202.
Повний текст джерелаA. Volpato, Álvaro, and Luís F. C. Alberto. "Grid-connected inverters per-unit Dynamic Phasor modelling, simulation and control." In Simpósio Brasileiro de Sistemas Elétricos - SBSE2020. sbabra, 2020. http://dx.doi.org/10.48011/sbse.v1i1.2346.
Повний текст джерелаNascente, Juliana M., Lúcia M. A. Drummond, and Eduardo Uchoa. "Balanceamento de Carga em um algoritmo Branch-and-Bound para execução em Grades computacionais." In Workshop em Sistemas Computacionais de Alto Desempenho. Sociedade Brasileira de Computação, 2005. http://dx.doi.org/10.5753/wscad.2005.18982.
Повний текст джерелаMan Kit Sio, João Paulo, and Romeu Reginatto. "Reactive power control of DFIG-based wind turbines for voltage support during faults." In Simpósio Brasileiro de Sistemas Elétricos - SBSE2020. sbabra, 2020. http://dx.doi.org/10.48011/sbse.v1i1.2182.
Повний текст джерелаMarques de Carvalho, Cleiton, Daniel Orlando G. Medina, José Calixto Lopes, and Thales Sousa. "Computer Modeling and Analysis of a Hybrid Renewable Energy System Grid-Connected Using Homer Pro." In Simpósio Brasileiro de Sistemas Elétricos - SBSE2020. sbabra, 2020. http://dx.doi.org/10.48011/sbse.v1i1.2198.
Повний текст джерелаR. F. B. de Souza, Victor, Luciano S. Barros, and Flavio B. Costa. "Performance Comparison of 2L-VSC, 3L-NPC, and 3L-MMC Converter Topologies for Interfacing Grid-Connected Systems." In Simpósio Brasileiro de Sistemas Elétricos - SBSE2020. sbabra, 2020. http://dx.doi.org/10.48011/sbse.v1i1.2297.
Повний текст джерелаPenha da Silva Júnior, Guilherme, Thiago Figueiredo do Nascimento, and Luciano Sales Barros. "Comparison of Virtual Synchronous Generator Strategies for Control of Distributed Energy Sources and Power System Stability Improvement." In Simpósio Brasileiro de Sistemas Elétricos - SBSE2020. sbabra, 2020. http://dx.doi.org/10.48011/sbse.v1i1.2482.
Повний текст джерелаDuarte, Samuel N., Pedro M. Almeida, and Pedro G. Barbosa. "Zero-sequence network voltage compensation by a three-phase four-wire grid-connected converter." In 2018 Simposio Brasileiro de Sistemas Eletricos (SBSE) [VII Brazilian Electrical Systems Symposium (SBSE)]. IEEE, 2018. http://dx.doi.org/10.1109/sbse.2018.8395607.
Повний текст джерелаDobbin, Trevor V. do C., Ramon R. Costa, Glauco N. Taranto, and Ana Beatriz M. Aguiar. "Reduced order DFIG model based on the singular perturbation method for grid connected wind turbines analysis." In 2018 Simposio Brasileiro de Sistemas Eletricos (SBSE) [VII Brazilian Electrical Systems Symposium (SBSE)]. IEEE, 2018. http://dx.doi.org/10.1109/sbse.2018.8395716.
Повний текст джерелаSouza, A. C., C. R. A. Junior, G. T. Silva, and I. N. Santos. "Simulation and dynamic analysis of three-phase photovoltaic system connected on grid employing Matlab/Simulink software." In 2018 Simposio Brasileiro de Sistemas Eletricos (SBSE) [VII Brazilian Electrical Systems Symposium (SBSE)]. IEEE, 2018. http://dx.doi.org/10.1109/sbse.2018.8395746.
Повний текст джерела