Дисертації з теми "Silicon photonic sensors"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-27 дисертацій для дослідження на тему "Silicon photonic sensors".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Noh, Jong Wook. "In-Plane, All-Photonic Transduction Method for Silicon Photonic Microcantilever Array Sensors." BYU ScholarsArchive, 2009. https://scholarsarchive.byu.edu/etd/1965.
Повний текст джерелаYang, Wenjian. "Microwave Photonics and Sensing based on Silicon Photonics." Thesis, University of Sydney, 2020. https://hdl.handle.net/2123/23482.
Повний текст джерелаVargas, German R. "Silicon Photonic Device for Wavelength Sensing and Monitoring." FIU Digital Commons, 2012. http://digitalcommons.fiu.edu/etd/734.
Повний текст джерелаKoshkinbayeva, Ainur. "New photonic architectures for mid-infrared gaz sensors integrated on silicon." Thesis, Lyon, 2017. http://www.theses.fr/2017LYSEI019.
Повний текст джерелаThe work focuses on optical multiplexers operating in mid-IR for broadband source in gas sensing application. Two configurations were studies – arrayed waveguide grating (AWG) and planar concave grating (PCG). First, principle of operation was understood in order to develop analytical solution for output field using Gaussian approximation of the field and Fourier Optics. Then, semi-analytical simulation tool of the spectral response for both multiplexer configurations was developed in MATLAB. Normal distribution of phase errors was introduced to semi-analytical AWG model, which allowed us to study the correlation between standard deviation of phase errors and the level of crosstalk of AWG spectral response. AWG at 5.65 µm was fabricated based on SiGe/Si technology using the MATLAB tool for design parameters calculation and P.Labeye’s tool for AWG geometry calculation. Devices with slightly varying parameters were characterized: AWG1 with 4.6 µm waveguides and 9µm MMI; AWG2 with 4.6 µm waveguides and 11µm MMI; AWG3 with 4.8 µm waveguides and 9µm MMI. Measurements of devices on chip 36 (center of the wafer) and chip 32 (side of the wafer) were performed and analyzed. Temperature measurements of AWG2 and AWG3 (chip 32 and chip 36) at points five temperature points showed linear dependence of spectral shift with the temperature which has a good correlation with simulation predictions
Caroselli, Raffaele. "Development of high sensitivity photonic sensing structures based on porous silicon substrates." Doctoral thesis, Universitat Politècnica de València, 2018. http://hdl.handle.net/10251/107318.
Повний текст джерелаHealth and well-being have always been the center of attention of many research institutions and companies around the world. This led the technology to develop in the chemical, biological, medical and clinical fields with the aim to provide a better protection to the human being. As a consequence, a competition is born between the time necessary to the disease to progress and the time necessary to man to treat such disease. In order to win this competition, it is necessary to act with anticipation, when disease is not too developed yet. This is possible by performing an early-detection. The achievement of this goal paves the way for the development of optical biosensing devices able to detect the presence of certain molecules at extremely low concentrations. Among them, photonic integrated structures are finding a great success due to their considerably high sensitivity. However, the sensing mechanism of these structures is based on the interaction between the evanescent wave, propagating along the structure surface, and the target analyte to detect. In this way, not all the field propagating in the photonic structure is used for sensing purposes, but rather only a small amount of it. This represents a crucial limitation of the integrated photonics based sensors. The aim of this PhD Thesis is to overcome this limitation and to develop more sensitive photonic sensing structures able to detect the lowest concentration possible. To this aim, we focused on the study of porous silicon as platform for the development of optical structures with extremely high sensitivities thanks to the fact that the sensing interaction takes place directly inside the structure itself, allowing to exploit all the field propagating in the structure.
La salut i el benestar sempre han sigut el centre d'atenció de moltes institucions de recerca i empreses de tot el món. Açò va portar a la tecnologia a desenvolupar-se en els camps químic, biològic, mèdic i clínic amb l'objectiu de proporcionar una millor protecció a l'ésser humà. Com a conseqüència, ha sorgit una competició entre el temps necessari per que la malaltia progresse i el temps necessari per que l'home tracte aquesta malaltia. Per a guanyar aquesta competició, és necessari actuar amb anticipació, quan la malaltia encara no està massa desenvolupada. Açò és possible realitzant una detecció precoç de la malaltia. L'assoliment d'aquest objectiu facilita el camí per al desenvolupament de dispositius òptics de biosensat capaços de detectar la presència de certes molècules en concentracions extremadament baixes. Entre ells, les estructures fotòniques integrades estan tenint un gran èxit a causa de la seua considerablement alta sensibilitat. No obstant açò, el mecanisme de detecció d'aquestes estructures es basa en la interacció entre l'ona evanescent, que es propaga al llarg de la superfície de l'estructura, i l'analit a detectar. D'aquesta forma, no tot el camp que es propaga en l'estructura fotònica s'usa amb finalitats de detecció, sinó solament una xicoteta quantitat d'aquest. Açò representa una limitació crucial dels sensors basats en fotònica integrada. L'objectiu d'aquesta tesi doctoral és superar aquesta limitació i desenvolupar estructures fotòniques de sensat més sensibles que siguen capaces de detectar les concentracions més baixes possibles. Amb aquest objectiu, ens centrem en l'estudi del silici porós com a plataforma per al desenvolupament d'estructures òptiques amb sensibilitats extremadament altes gràcies a que la interacció de sensat es realitza directament dins de la pròpia estructura, el que permet explotar tot el camp que es propaga.
Caroselli, R. (2018). Development of high sensitivity photonic sensing structures based on porous silicon substrates [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/107318
TESIS
Liu, Qiankun. "SiGe photonic integrated circuits for mid-infrared sensing applications." Thesis, Université Paris-Saclay (ComUE), 2019. http://www.theses.fr/2019SACLS166/document.
Повний текст джерелаMid-infrared (mid-IR) spectroscopy is a nearly universal way to identify chemical and biological substances, as most of the molecules have their vibrational and rotational resonances in the mid-IR wavelength range. Commercially available mid-IR systems are based on bulky and expensive equipment, while lots of efforts are now devoted to the reduction of their size down to chip-scale dimensions. The use of silicon photonics for the demonstration of mid-IR photonic circuits will benefit from reliable and high-volume fabrication to offer high performance, low cost, compact, lightweight and power consumption photonic circuits, which is particularly interesting for mid-IR spectroscopic sensing systems that need to be portable and low cost. Among the different materials available in silicon photonics, Germanium (Ge) and Silicon-Germanium (SiGe) alloys with a high Ge concentration are particularly interesting because of the wide transparency window of Ge up to 15 µm. In this context, the objective of this thesis is to investigate a new Ge-rich graded SiGe platform for mid-IR photonic circuits. Such new plateform was expected to benefit from a wide transparency wavelength range and a high versatility in terms of optical engineering (effective index, dispersion, …). During this thesis, different waveguides platforms based on different graded profiles have been investigated. First it has been shown that waveguides with low optical losses of less than 3 dB/cm can be obtained in a wide wavelength range, from 5.5 to 8.5 µm. A proof of concept of sensing based on the absorption of the evanescent component of the optical mode has then been demonstrated. Finally, elementary building blocs have been investigated. The first Bragg mirror-based Fabry Perot cavities and racetrack resonators have been demonstrated around 8 µm wavelength. A broadband dual-polarization MIR integrated spatial heterodyne Fourier-Transform spectrometer has also been obtained. All these results rely on material and device design, clean-room fabrication and experimental characterization. This work was done in the Framework of EU project INsPIRE in collaboration with Pr. Giovanni Isella from Politecnico Di Milano
Chen, Li. "Hybrid Silicon and Lithium Niobate Integrated Photonics." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1429660021.
Повний текст джерелаSchröder, Tim. "Integrated photonic systems for single photon generation and quantum applications." Doctoral thesis, Humboldt-Universität zu Berlin, Mathematisch-Naturwissenschaftliche Fakultät I, 2013. http://dx.doi.org/10.18452/16723.
Повний текст джерелаThe presented thesis covers the development and investigation of novel integrated single photon (SP) sources and their application for quantum information schemes. SP generation was based on single defect centers in diamond nanocrystals. Such defect centers offer unique optical properties as they are room temperature stable, non-blinking, and do not photo-bleach over time. The fluorescent nanocrystals are mechanically stable, their size down to 20nm enabled the development of novel nano-manipulation pick-and-place techniques, e.g., with an atomic force microscope, for integration into photonic structures. Two different approaches were pursued to realize novel SP sources. First, fluorescent diamond nanocrystals were integrated into nano- and micrometer scaled fiber devices and resonators, making them ultra-stable and maintenance free. Secondly, a solid immersion microscope (SIM) was developed. Its solid immersion lens acts as a dielectric antenna for the emission of defect centers, enabling the highest photon rates of up to 2.4Mcts/s and collection efficiencies of up to 4.2% from nitrogen vacancy defect centers achieved to date. Implementation of the SIM at cryogenic temperatures enabled novel applications and fundamental investigations due to increased photon rates. The determination of the spectral diffusion time of a single nitrogen vacancy defect center (2.2µs) gave new insights about the mechanisms causing spectral diffusion. Spectral diffusion is a limiting property for quantum information applications. The table-top SIM was integrated into a compact mobile SP system with dimension of only 7x19x23cm^3 while still maintaining record-high stable SP rates. This makes it interesting for various SP applications. First, a quantum key distribution scheme based on the BB84 protocol was implemented, for the first time also with silicon vacancy defect centers. Secondly, a conceptually novel scheme for the generation of infrared SPs was introduced and realized.
Shnaiderman, Rami [Verfasser], Vasilis [Akademischer Betreuer] Ntziachristos, Vasilis [Gutachter] Ntziachristos, and Bernhard [Gutachter] Wolfrum. "Silicon photonics sensors of ultrasound for optoacoustic imaging / Rami Shnaiderman ; Gutachter: Vasilis Ntziachristos, Bernhard Wolfrum ; Betreuer: Vasilis Ntziachristos." München : Universitätsbibliothek der TU München, 2021. http://d-nb.info/1238374034/34.
Повний текст джерелаFrem, Leonardo A. "Hall Effect Modeling in FEM Simulators and Comparison to Experimental Results in Silicon and Printed Sensors." DigitalCommons@CalPoly, 2016. https://digitalcommons.calpoly.edu/theses/1618.
Повний текст джерелаMicó, Cabanes Gloria. "Integrated Spectroscopic Sensor fabricated in a novel Si3N4 platform." Doctoral thesis, Universitat Politècnica de València, 2021. http://hdl.handle.net/10251/159381.
Повний текст джерела[CAT] La present tesi s'ha centrat en el modelatge, disseny i demostració experimental d'un sensor espectroscòpic integrat basat en un AWG (de l'anglès Arrayed Waveguide Grating). El dispositiu ha sigut dissenyat i fabricat en una nova plataforma de nitrur de silici (Si3N4) en òxid de silici (SiO2) desenvolupada a Espanya. El treball realitzat en aquesta tesi es pot dividir en dues seccions principalment. En la primera part, es descriu el panorama general de les plataformes de Si3N4 existents i el seu estat de l'art, juntament amb la descripció dels processos de fabricació i caracterització de la nostra plataforma de Si3N4 amb 300 nm d'altura en la capa de guiat. En la segona part, es presenta el dispositiu batejat com Integrated Optical Spectroscopic Sensor (IOSS). El IOSS consisteix en un AWG en el que el seu conjunt de guies d'ona està dividit en dos subgrups dissenyats per a replicar els canals del AWG. Les guies d'un dels subgrups conté finestres de detecció, que estan definides per seccions en les quals el nucli de les guies d'ona està al descobert i en contacte amb el mitjà que li envolta. D'aquesta manera, la detecció es duu a terme mitjançant la interacció del camp evanescent amb la mostra depositada. Les guies del segon subconjunt romanen inalterades. Per tant, el dispositiu proporciona al mateix temps els espectres de detecció de referència. El model matemàtic del IOSS, el seu procediment de disseny i la prova de concepte del sensor configurat per a espectroscopia d'absorció es descriuen en aquesta tesi.
[EN] This thesis is focused on the model, design and experimental demonstration of an integrated spectroscopic sensor based on a modified Arrayed Waveguide Grating (AWG). The device has been designed and fabricated in a new silicon nitride (Si3N4) on silicon oxide (SiO2) platform developed in Spain. The work performed for this thesis can be then divided into two main sections. In the first part, an overview of the existing Si3N4 platforms and their state of art is described, alongside the report on the fabrication and characterization of our 300 nm guiding film height Si3N4 platform. On the second part, the device named Integrated Optical Spectroscopic Sensor (IOSS) is presented. The IOSS consists of an AWG which arrayed waveguides are divided into two sub-sets engineered to replicate the AWG channels. The waveguides of one of the sub-sets contain sensing windows, defined as waveguides sections which core is in contact with the surrounding media. Thus, the sensing is performed through evanescent field interaction with the sample deposited. The waveguides from the second sub-set remain isolated. Therefore, the device provides both sensing and reference spectra. The IOSS mathematical model, design procedure and proof of concept configured for absorption spectroscopy are reported in this thesis.
Micó Cabanes, G. (2020). Integrated Spectroscopic Sensor fabricated in a novel Si3N4 platform [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/159381
TESIS
Liu, Huanhuan. "A novel optical bio-chemical sensor based on hybrid nanostructures of Bowtie nanoantennas and Fabry-Perot Interferometer." Phd thesis, Ecole Centrale de Lyon, 2013. http://tel.archives-ouvertes.fr/tel-01064196.
Повний текст джерелаCalvo, Michele. "Study and manufacturing of biosensors based on plasmonic effects and built on silicon." Thesis, Lyon, 2020. http://www.theses.fr/2020LYSEI055.
Повний текст джерелаLab-on-a-chip (or LOC) devices scale down the laboratory processes for detecting illnesses and monitoring sick patients without the need of medical laboratories. These criteria are made possible with a transducer that can convert the biological presence of the target molecule into electrical information. Since the early 2000s, integrated photonics have offered a possible solution for a transducer compatible with LOC needs. In particular, silicon micro-ring resonators represent a compact and sensitive choice to use as a transducer in LOC devices. In agreement with the requirements of LOC devices, the objective of this project is to design and assess the performance of a compact photonic biosensor. The system will be based on integrated photonic transduction. The requirements are that it is compatible with an industrial fabrication platform and fluidic systems, with a sensitivity equal to or higher than the state-of-the-art and simple to functionalize in order to localize the target molecules in the sensitive regions of the sensor. This project details the design, fabrication, and characterization of such a biosensor. In particular, the photonic biosensor is a ring resonators with a Hybrid Plasmonic Waveguide (HPWG) cross-section that fulfills the LOC requirements
Norlin, Börje. "Characterisation and application of photon counting X-ray detector systems." Doctoral thesis, Mittuniversitetet, Institutionen för informationsteknologi och medier, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-38.
Повний текст джерелаDenna avhandling berör utveckling och karaktärisering av fotonräknande röntgensystem. ”Färgröntgen” öppnar nya perspektiv för medicinsk röntgendiagnostik och även för materialröntgen inom industrin. Skillnaden i absorption av olika ”färger” kan användas för att särskilja olika material i ett objekt. Färginformationen kan till exempel användas i sjukvården för att identifiera benskörhet. Färgen på röntgenfotonen kan identifieras om detektorsystemet kan detektera varje foton individuellt. Sådana detektorsystem kallas ”fotonräknande” system. Med modern teknik är det möjligt att konstruera fotonräknande detektorsystem som kan urskilja detaljer ner till en upplösning på circa 50 µm. Med så små pixlar kommer ett problem att uppstå. I en halvledardetektor ger varje absorberad foton upphov till ett laddningsmoln som bidrar till den erhållna bilden. För höga fotonenergier är storleken på laddningsmolnet jämförbar med 50 µm och molnet kan därför fördelas över flera pixlar i bilden. Laddningsdelning är ett centralt problem delvis på grund av att bildens upplösning försämras, men framför allt för att färginformationen i bilden förstörs. Denna avhandling presenterar karaktärisering och simulering för att ge en mer detaljerad förståelse för fysikaliska processer som bidrar till laddningsdelning i detektorer från MEDIPIX-projekter. Designstrategier för summering av laddning genom kommunikation från pixel till pixel föreslås. Laddningsdelning kan också begränsas genom att introducera detektorkonstruktioner i 3D-struktur. I nästa generation av MEDIPIX-systemet, Medipix3, kommer summering av laddning att vara implementerat. Detta system, utrustat med en 3D-detektor i kisel, eller en tunn plan detektor av högabsorberande material med god kvalitet, har potentialen att kunna kommersialiseras för medicinska röntgensystem. Detta skulle bidra till bättre folkhälsa inom hela Europeiska Unionen.
Sartiano, Demetrio. "Design of optical fiber sensors and interrogation schemes." Doctoral thesis, Universitat Politècnica de València, 2021. http://hdl.handle.net/10251/161357.
Повний текст джерела[CA] Les fibres òptiques són dispositius molt utilitzats en el camp de les telecomunica-cions des del seu descobriment. En les últimes dècades, les fibres òptiques van començar a utilitzar-se com a sensors fotònics. Els primers treballs es van centrar en el mesurament d'unes dimensions físiques en un punt específic. Posteriorment, va sorgir la possibilitat de mesurar les propietats de la fibra òptica en diferents punts al llarg de la fibra. Aquest tipus de sensors es defineixen com a sensors distribüits. Els components optoelectrònics van ser desenvolupats i investigats per a telecomunicacions. Els avanços en les telecomunicacions van fer possi-ble el desenvolupament de sistemes d'interrogació per a sensors de fibra òptica, creixent en paral·lel amb els avanços de les telecomunicacions. Es van desenvolupar sistemes d'interrogació de fibra òptica que permeten l'ús d'una única fibra òptica monomodo estàndard com a sensor que pot monitorar desenes de milers de punts de detecció al mateix temps. Els mètodes que extreuen la informació de detecció del senyal reflectit en la fibra òptica són els més utilitzats a causa de la facilitat d'accés al sensor i la flexibilitat d'aquests sistemes. Els més estudiats són la reflectometría en dominis de temps i freqüència. La reflectometría òptica en el domini del temps (OTDR) va ser la primera tècnica utilitzada per a detectar la posició de les fallades en les xarxes de comunicació de fibra òptica. El OTDR sensible a la fase va fer possible detectar l'elongació i la temperatura en una posició específica. Paral·lelament, els gratings de Bragg (FBG) es van convertir en els dispositius més utilitzats per a implementar sensors en fibra òptica discrets. Es van desenvolupar tècniques de multiplexació per a realitzar la detecció en múltiples punts utilitzant FGBs. La reflectometría realitzada interrogant arrays de FBG febles demostra que millora el rendiment del sistema en comparació a l'ús d'una fibra monomodo. Els sistemes d'interrogatori actuals tenen alguns inconvenients. Alguns d'ells són velocitat d'interrogatori limitada, voluminositat i alt cost. En aquesta tesi doctoral es van desenvolupar nous sistemes d'interrogació i sensors de fibra òptica per a superar alguns d'aquests inconvenients. Els sensors de fibra òptica de plàstic demostren ser una plataforma innovadora per a desenvolupar nous sensors i siste-mes d'interrogació de baix cost i fàcils d'implementar per a fibres de plàstic comercials. Es va investigar la reflectometría en el domini del temps i les tècniques fotòniques de microones per a la interrogació d'una matriu de reixetes febles que van permetre simplificar el sistema d'interrogació per a la detecció de temperatura i vibració.
[EN] Optical fibers are devices largely used in telecommunication field since their discovery. In the last decades, optical fibers started to be used as photonic sensors. The first works were focused on the measurement of physical dimensions to a specific point. Afterward, emerged the possibility to measure the optical fiber properties at different locations along the fiber. These kinds of sensors are defined as distributed sensors. The optoelectronic components were developed and investigated for telecommunications. The progress in telecommunication made possible the development of optical fiber sensors interrogation systems, growing in parallel with the advances of telecommunications. Optical fiber interrogation systems were developed to use a single standard monomode optical fiber as a sensor that can monitor tens of thousands of sensing points at the same time. The methods that extract the sensing information from the backscattered signal in the optical fiber are widely employed because of the easiness of access to the sensor element and the flexibility of these systems. The most studied are the reflectometry in time and frequency domains. The optical time domain reflectometry (OTDR) was the first technique used to detect the position of the failures in the optical fiber communication networks. Using phase sensitive OTDR it is possible to sense strain and temperature at a specific position. In parallel, fiber Bragg gratings (FBGs) became the most widely used devices to implement discrete optical fiber sensors. Multiplexing techniques were developed to perform multi points sensing using these gratings. The reflectometry performed interrogating weak FBGs arrays demonstrate to improve the performance of the system employing a single mode fiber. The interrogation systems nowadays have some drawbacks. Some of them are limited speed of interrogation, bulkiness, and high cost. New interrogation systems and optical fiber sensors were developed in this doctoral thesis to overcome some of these drawbacks. Plastic optical fiber sensors demonstrate to be an innovative platform to develop both new sensors and low cost, easy to implement interrogation systems for commercial plastic fibers. Reflectometry in time domain and microwave photonic techniques were investigated for the interrogation of weak gratings array allowed to simplify the interrogation system for the sensing of temperature and vibration.
I would like to greatly thank the European Union’s Horizon 2020 Research and Innovation Program that funded the research described in this thesis under the Marie Sklodowska-Curie Action Grant Agreement 722509.
Sartiano, D. (2021). Design of optical fiber sensors and interrogation schemes [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/161357
TESIS
Martín, Sánchez David. "Desarrollo de biosensores fotónicos basados en membranas de silicio poroso." Doctoral thesis, Universitat Politècnica de València, 2019. http://hdl.handle.net/10251/125695.
Повний текст джерела[CAT] El desenvolupament dels biosensors està permetent realitzar anàlisis bioquímics cada vegada més ràpids, de manera molt més senzilla i utilitzant una menor quantitat de mostra. Això està donant lloc a aplicacions en les quals es monitoritzen paràmetres de manera contínua i autònoma, augmentant l'eficiència i reduint els costos. El tema principal d'aquesta Tesis ha sigut el desenvolupament i l'avaluació de biosensors basats en tècniques de transducció òptica, fabricats en silici porós, un material nanoestructurat que pot arribar a aconseguir una gran sensibilitat. El treball ha consistit en l'estudi de la fabricació i la caracterització de membranes de silici porós obtingudes a partir de substrats tipus p de baixa resistivitat. Per a fer-ho, s'ha desenvolupat un model matemàtic realista que permet simular el comportament del transductor i calcular els seus paràmetres experimentals. Gràcies a això, s'han estudiat propietats del material com l'efecte tèrmic, el que ha permés caracteritzar l'efecte termo-òptic del silici porós en el rang infraroig de l'espectre. A més, s'ha analitzat la infiltració de la mostra en el transductor amb l'objectiu de millorar el seu funcionament. Per aquest motiu, s'han examinat diferents morfologies de porus i s'ha implementat un flux actiu durant el sensat, en el qual la substància a analitzar fluïx a través de la membrana porosa, resolent problemes d'ompliment del sensor i mesclat amb altres substàncies.
[EN] The development of biosensors is leading to faster and simpler analyses of biochemical samples, using them in lower quantities. Over the last years, these advances have allowed the emergence of applications where parameters can be monitored continuously and autonomously, increasing the efficiency and reducing the costs. This Thesis has focused on the development and evaluation of biosensors based on optical transducers, which are fabricated with porous silicon, a nanostructured material that is able to reach a high sensitivity. In this work, the fabrication and characterization of porous silicon membranes using heavily doped p-type silicon wafers have been studied. A realistic mathematical model has been developed in order to simulate the transducer's behavior and calculate the experimental parameters. This has led to the study of physical properties such as the thermal effect, where we were able to characterize the thermo-optic coefficient in the near-infrared range. Moreover, the penetration of the sample into the structure has been analyzed. For this purpose, several pore morphologies were examined and an active flow has been implemented during the sensing experiments, where the substance of interest flows through the porous membrane, to solve problems such as the partial filling of the sensor or the mixture of different substances during the experiments.
Martín Sánchez, D. (2019). Desarrollo de biosensores fotónicos basados en membranas de silicio poroso [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/125695
TESIS
Banniard, Louise. "Capteurs inertiels hautes performances à transduction optique sur silicium." Thesis, Université Grenoble Alpes, 2020. http://www.theses.fr/2020GRALT059.
Повний текст джерелаHigh performance accelerometers are required in many different domains as sophisticated navigation control systems, research or consumer electronics.A variety of transduction mechanisms has been used to sense the acceleration: capacitive, piezoresistive, thermal... Optomechanical transduction is a promising avenue to realize accelerometers with extremely sensitive readout of mechanical motion with high bandwidth. This also has the advantage of being immune to electromagnetic interferences contrary to the traditional transduction methods.In this work, an optomechanical accelerometer is presented which employs Whispering Gallery Modes disk or ring resonator as displacement sensor. The motion of an inertial mass detunes the resonant cavity and thus modulates the optical power at the output of the sensor.The designs and technological developments of three optomechanical accelerometers are described. We present also the optical and mechanical sensor characterisations. The aim of the thesis is to evaluate the potential of an optomechanical approach for high performance accelerometers
Marques, Gustavo Pires 1978. "Análise do potencial de calibração da força óptica através de dispositivos de microscopia de força atômica." [s.n.], 2005. http://repositorio.unicamp.br/jspui/handle/REPOSIP/277492.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Física Gleb Wataghin
Made available in DSpace on 2018-08-20T14:50:59Z (GMT). No. of bitstreams: 1 Marques_GustavoPires_M.pdf: 1771357 bytes, checksum: 8ee6919633e2615608f25b33bec98e96 (MD5) Previous issue date: 2005
Resumo: O microscópio de força atômica é uma ferramenta que possibilita a medida de forças precisamente localizadas com resoluções no tempo, espaço e força jamais vistas. No coração deste instrumento está um sensor a base de uma viga (cantilever) que é responsável pelas características fundamentais do AFM. O objetivo desta pesquisa foi usar a deflexão deste cantilever para obter uma calibração rápida e precisa da força da armadilha da pinça óptica, assim como testar e comparar com os método tradicionalmente utilizados para este propósito. Para isso, foi necessário analisar e entender o condicionamento de sinais utilizados no AFM. Foram estudados cantilever tradicionais, cujo sistema de detecção é baseado na deflexão de um feixe laser em conjunto com fotodetectores, bem como cantilevers piezoresistivos. Cantilevers piezoresistivos fornecem uma alternativa simples e conveniente aos cantilevers ópticos. A integração de um elemento sensorial dentro do cantilever elimina a necessidade de um laser externo e de um detector utilizados na maioria dos AFMs. Isto elimina a etapa delicada de alinhamento da laser ao cantilever e fotodetector que normalmente precede uma medida com AFM, uma simplificação que expande o potencial do AFM para o uso em meios adversos, como câmaras de ultra alto vácuo ou, como no caso específico das Pinças Ópticas, onde existem esferas em solução líquida e também restrições de dimensão
Abstract: The atomic force microscope (AFM) is a tool that enables the measurement of precisely localized forces with unprecedented resolution in time, space and force. At the heart of this instrument is a cantilever probe that sets the fundamental features of the AFM. The objective of this research has been using the deflection of this cantilever to get a fast and accurate calibration of optical tweezers trap force, as well as testing and comparing to the traditionally used methods of calibration for this purpose. For that it was necessary to resolve and understand the sensors signals conditioning used in the AFM. Traditional cantilevers, whose detection system is based on the deflection of a laser beam in addition with a photodetector, as well as piezoresistive cantilevers has been studied. Piezoresistive cantilevers provide a simple and convenient alternative to optically detected cantilevers. Integration of a sensing element into the cantilever eliminates the need for the external laser and detector used in most AFMs. This removes the delicate step of aligning the laser to the cantilever and photodetector which usually precedes an AFM measurement, a simplification which expands the potential of the AFM for use in difficult environments such as ultrahigh vacuum chambers or, as in Optical Tweezers specific case, where there are spheres into a liquid solution as well as dimensional constraints
Mestrado
Física
Mestre em Física
Prashanth, R. "Versatile sensing platform using silicon photonic microring resonators." Thesis, 2018. https://etd.iisc.ac.in/handle/2005/5504.
Повний текст джерела(5930402), Justin C. Wirth. "Engineering Sensitivity: An Optical Optimization of Ring Resonator Arrays for Label-Free Whole Bacterial Sensing." Thesis, 2019.
Знайти повний текст джерелаChatterjee, Avijit. "Silicon photodetector integrated silicon nitride-on-SOI platform for communication and sensor applications." Thesis, 2021. https://etd.iisc.ac.in/handle/2005/5250.
Повний текст джерелаLai, Jian Ren, and 賴建任. "Porous Silicon Based Photonic-Sensor for High Sensitive Heavy Metal Ion Detecrtion." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/put9b8.
Повний текст джерела國立清華大學
工程與系統科學系
103
Water is essential to human life material, settlement of people's lives as much dependent on the water area and growth. Human society continues to progress from the first agricultural society through the industrial revolution until now, people with the growth of industry and technology have had a relatively affluent life than ever before. But in the booming industry it has been accompanied by a number of environmental pollution produced, such as carbon dioxide cause global warming caused by industrial waste water in various forms of water pollution and so on. This will gradually hurting the environment we live. The heavy metal pollution in water pollution in 70 to 80 years is relevant agricultural, fishery and animal husbandry against Taiwan, such as arsenic, cadmium, mercury, lead and heavy metal pollution. In view of this, the aim of this study is related to the manufacture of heavy metals in water pollution detection mechanism. The current detection mechanism mostly use the more expensive equipment or the use of complex chemical titration step approach to the analysis of heavy metals in aqueous solution. In this experiment, the first generation of wafer-dimensional photonic crystal having a characteristic and by a simple chemical synthesis and surface modification of it in Fourier infrared spectroscopy (FTIR) for detecting signals of heavy metals, and to achieve qualitative and quantitative results. The second generation of photonic crystal wafer as visible light with a wavelength of electrochemical reduction of metal ions to be measured directly in the porous silicon precipitates hole caused large refractive index change, to enhance the signal strength and the detection limit of the effect. The first two chapters illustrate the application of this study motive and related experiments. Today introduced the relevant heavy metal detection equipment, introduces the basic principles of photonic crystals with porous silicon etching works. The third and fourth chapters compared with experimental design processes and related process steps. Fifth and sixth chapters, compared with results of the discussions and conclusions. Literature review is included in Chapter VII.
Zou, Yi active 21st century. "Near-infrared and mid-infrared integrated silicon devices for chemical and biological sensing." Thesis, 2014. http://hdl.handle.net/2152/28068.
Повний текст джерелаtext
Tsai, Wan-Ting, and 蔡宛庭. "Ultra-Low Detection-Limit of Portable Heavy Metal Sensor by Electrochemistry integrating Porous Silicon Photonic Structure and Platinum Porous Silicon." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/7shmb8.
Повний текст джерелаPal, Sohini. "Nanopore Based Single-molecule Sensors." Thesis, 2020. https://etd.iisc.ac.in/handle/2005/5457.
Повний текст джерелаKumar, Sagnik. "AlGaN/GaN Heterojunction Based Hall Sensors for Magnetic Field Sensing over Wide Temperature Range." Thesis, 2020. https://etd.iisc.ac.in/handle/2005/4590.
Повний текст джерелаYeke, Yazdandoost Mohammad. "Photon Quantum Noise Limited Pixel and Array architectures in a-Si Technology for Large Area Digital Imaging Applications." Thesis, 2011. http://hdl.handle.net/10012/6220.
Повний текст джерела