Статті в журналах з теми "SiCp/Al composite"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "SiCp/Al composite".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Chen, Yu Hong, Jian Jun Ma, Wen Jie Guo, Liang Jiang, and Peng Yuan Yang. "Microwave Sintering of SiCp/Al Composite." Key Engineering Materials 492 (September 2011): 138–41. http://dx.doi.org/10.4028/www.scientific.net/kem.492.138.
Повний текст джерелаZhou, Xian Liang, Duo Sheng Li, Ai Hua Zou, Xiao Zhen Hua, G. Z. Ye, Qing Jun Chen, Jian Yun Zhang, and Yong Jin Tang. "Study on Atmospheric Corrosion Behaviour of Sicp/Al Composite." Advanced Materials Research 136 (October 2010): 275–78. http://dx.doi.org/10.4028/www.scientific.net/amr.136.275.
Повний текст джерелаLi, Duo Sheng, X. L. Zhou, A. H. Zou, X. Z. Hua, G. Z. Ye, and Q. J. Chen. "Study on Micro-Deformation Behavior of Sicp/Al Composites at Low Stress." Advanced Materials Research 426 (January 2012): 147–50. http://dx.doi.org/10.4028/www.scientific.net/amr.426.147.
Повний текст джерелаZhou, Xian Liang, Duo Sheng Li, Ai Hua Zou, Xiao Zhen Hua, Zhi Guo Ye, and Qing Jun Chen. "Thermal Expansion Behavior and Characteristic of SiCp/Al Composites." Advanced Materials Research 287-290 (July 2011): 658–61. http://dx.doi.org/10.4028/www.scientific.net/amr.287-290.658.
Повний текст джерелаZhang, Zhen Lin, Zhi Feng Zhang, Jun Xu, and Wei Min Mao. "Rheological Behavior and Fluidity of Semi-Solid SiCp/A357 Composites with Different SiC Addition Levels." Solid State Phenomena 256 (September 2016): 126–32. http://dx.doi.org/10.4028/www.scientific.net/ssp.256.126.
Повний текст джерелаWang, Bin, Shengguan Qu, and Xiaoqiang Li. "Preparation and Anodizing of SiCp/Al Composites with Relatively High Fraction of SiCp." Scanning 2018 (2018): 1–13. http://dx.doi.org/10.1155/2018/8945729.
Повний текст джерелаLi, Duo Sheng, Dun Wen Zuo, Xian Liang Zhou, Jian Yun Zhang, and Xiao Zhen Hua. "Wear-Resistant Property of SiCp/Al Composites." Key Engineering Materials 368-372 (February 2008): 1096–98. http://dx.doi.org/10.4028/www.scientific.net/kem.368-372.1096.
Повний текст джерелаChan, K. C., and J. Liang. "Effect of Microstructures on Deformation Behaviour of Aluminium Matrix Composites in Laser Bending." Textures and Microstructures 34, no. 1 (January 1, 2000): 43–54. http://dx.doi.org/10.1155/tsm.34.43.
Повний текст джерелаLi, Duo Sheng, Xian Liang Zhou, Ai Hua Zhou, Xiao Zhen Hua, and Y. W. Yu. "Study on Microstructure Characterization of SiCp/Al Composites." Advanced Materials Research 535-537 (June 2012): 227–30. http://dx.doi.org/10.4028/www.scientific.net/amr.535-537.227.
Повний текст джерелаLiaw, P. K., R. Pitchumani, D. K. Hsu, H. Jeong, and S. C. Yao. "Nondestructive Eddy Current Evaluation of Anisotropic Conductivities of Silicon Carbide Reinforced Aluminum Metal-Matrix Composite Extrusions." Journal of Engineering for Gas Turbines and Power 116, no. 3 (July 1, 1994): 647–56. http://dx.doi.org/10.1115/1.2906869.
Повний текст джерелаSun, Hao, Chaochao Zhang, Yikai Li, Tingting Yin, Hanming Zhang, and Jin Pu. "Study on prediction model of surface roughness of SiCp/Al composites based on Neural Network." Journal of Physics: Conference Series 2174, no. 1 (January 1, 2022): 012091. http://dx.doi.org/10.1088/1742-6596/2174/1/012091.
Повний текст джерелаDong, Cuige, Richu Wang, and Suqing Guo. "Microstructures and Mechanical Properties of Cu-Coated SiC Particles Reinforced AZ61 Alloy Composites." Coatings 9, no. 12 (December 3, 2019): 820. http://dx.doi.org/10.3390/coatings9120820.
Повний текст джерелаAmirkhanlou, Sajjad, and Behzad Niroumand. "Development of Al356/SiCp cast composites by injection of SiCp containing composite powders." Materials & Design 32, no. 4 (April 2011): 1895–902. http://dx.doi.org/10.1016/j.matdes.2010.12.013.
Повний текст джерелаZhu, Jianhua, Lei Liu, Guohua Hu, Bin Shen, Wenbin Hu, and Wenjiang Ding. "Study on composite electroforming of Cu/SiCp composites." Materials Letters 58, no. 10 (April 2004): 1634–37. http://dx.doi.org/10.1016/j.matlet.2003.08.040.
Повний текст джерелаYan, Hong, Ming Fu Fu, Fa Yun Zhang, and Guo Xiang Chen. "Research on Properties of SiCp/AZ61 Magnesium Matrix Composites in Fabrication Processes." Materials Science Forum 561-565 (October 2007): 945–48. http://dx.doi.org/10.4028/www.scientific.net/msf.561-565.945.
Повний текст джерелаWang, K., JF Cheng, WJ Sun, and HS Xue. "An approach for increase of reinforcement content in particle rich zone of centrifugally cast SiCP/Al composites." Journal of Composite Materials 46, no. 9 (August 15, 2011): 1021–27. http://dx.doi.org/10.1177/0021998311414070.
Повний текст джерелаHuang, Zhao Hui, Wei Pan, Long Hao Qi, and He Zhuo Miao. "Erosive Wear Behavior of Reaction Sintered Si3N4-SiCp Composite Ceramic in Liquid-Solid Flow." Key Engineering Materials 280-283 (February 2007): 1317–18. http://dx.doi.org/10.4028/www.scientific.net/kem.280-283.1317.
Повний текст джерелаXu, Qiong, Aibin Ma, Junjie Wang, Jiapeng Sun, Jinghua Jiang, Yuhua Li, and Chaoying Ni. "Development of High-Performance SiCp/Al-Si Composites by Equal Channel Angular Pressing." Metals 8, no. 10 (September 20, 2018): 738. http://dx.doi.org/10.3390/met8100738.
Повний текст джерелаShen, M. J., M. F. Zhang, and T. Ying. "Microstructures, interface structure and room temperature tensile properties of magnesium materials reinforced by high content submicron SiCp." Science and Engineering of Composite Materials 26, no. 1 (January 28, 2019): 388–93. http://dx.doi.org/10.1515/secm-2019-0025.
Повний текст джерелаXu, Dong Xia, Long Chen, Bin Xu, and Fei Han. "Preliminary Research on Brazability of SiC Particulate Reinforced Aluminium-Based Composites." Advanced Materials Research 683 (April 2013): 518–21. http://dx.doi.org/10.4028/www.scientific.net/amr.683.518.
Повний текст джерелаAmirkhanlou, Sajjad, and Behzad Niroumand. "Fabrication and characterization of Al356/SiCp semisolid composites by injecting SiCp containing composite powders." Journal of Materials Processing Technology 212, no. 4 (April 2012): 841–47. http://dx.doi.org/10.1016/j.jmatprotec.2011.11.007.
Повний текст джерелаGhahremainian, M., and Behzad Niroumand. "Compocasting of an Al-Si-SiCp Composite Using Powder Injection Method." Solid State Phenomena 141-143 (July 2008): 175–80. http://dx.doi.org/10.4028/www.scientific.net/ssp.141-143.175.
Повний текст джерелаHe, Yi Qiang, Jian Ming Yang, Bin Qiao, and Li Chao Feng. "Microstructure and Mechanical Properties of Metal Injection Molded SiCP/ Cu Composites." Advanced Materials Research 629 (December 2012): 105–9. http://dx.doi.org/10.4028/www.scientific.net/amr.629.105.
Повний текст джерелаWang, Bin, Shengguan Qu, and Xiaoqiang Li. "Effect of the Different High Volume Fraction of SiC Particles on the Junction of Bismuthate Glass-SiCp/Al Composite." Scanning 2018 (2018): 1–10. http://dx.doi.org/10.1155/2018/7394040.
Повний текст джерелаTang, Li Li, Ming Hu, Lin Shan, and Yun Long Zhang. "Influences of SiC Particle Size and Electroless Plating on the Properties of SiCp/Cu Composites." Advanced Materials Research 1030-1032 (September 2014): 103–7. http://dx.doi.org/10.4028/www.scientific.net/amr.1030-1032.103.
Повний текст джерелаWu, Zhe, Jianyang Song, Yang Zhang, Bo Xue, and Sijia Wang. "Mechanism Analysis of Nanosecond Pulse Laser Etching of SiCp/Mg Composites." Materials 15, no. 21 (October 31, 2022): 7654. http://dx.doi.org/10.3390/ma15217654.
Повний текст джерелаNi, Zeng Lei, Ai Qin Wang, Jing Pei Xie, Ming Fang, and Li Jun Zhang. "Influence of SiCp Surface Treatment on the SiCp/Al-30Si Microstructure and Performance." Advanced Materials Research 538-541 (June 2012): 326–30. http://dx.doi.org/10.4028/www.scientific.net/amr.538-541.326.
Повний текст джерелаRyu, Ho J., Kyung H. Chung, Seung I. Cha, and Soon H. Hong. "Analysis of creep behavior of SiC/Al metal matrix composites based on a generalized shear-lag model." Journal of Materials Research 19, no. 12 (December 1, 2004): 3633–40. http://dx.doi.org/10.1557/jmr.2004.0472.
Повний текст джерелаŞahin, Yusuf. "Wear Behavior of Al-Al2O3 Reinforced Composites." Advanced Materials Research 308-310 (August 2011): 1577–81. http://dx.doi.org/10.4028/www.scientific.net/amr.308-310.1577.
Повний текст джерелаZhang, Zhen Lin, Zhi Feng Zhang, Jun Xu, Hao Zhang, and Wei Min Mao. "Effect of Mechanical Stirring and Air Pressure on the Fluidity of SiCp/A357 Composites." Materials Science Forum 898 (June 2017): 1000–1006. http://dx.doi.org/10.4028/www.scientific.net/msf.898.1000.
Повний текст джерелаAhmed, A., A. J. Neely, K. K. Shankar, and Sammy Lap Ip Chan. "Tensile Behaviour of Nano-Particulate Reinforced Aluminium Matrix Composites at Elevated Temperatures." Materials Science Forum 561-565 (October 2007): 761–64. http://dx.doi.org/10.4028/www.scientific.net/msf.561-565.761.
Повний текст джерелаNwigboa, Michael N., and Lasisi E. Umorub. "Applicability of Carbonized Coconut Shell and Silicon Carbide Nanoparticles in the Synthesis of Hybrid Aluminium Matrix Composites." European Journal of Material Sciences 9, no. 1 (January 15, 2022): 1–17. http://dx.doi.org/10.37745/ejms.2014/vol9n1117.
Повний текст джерелаM.N., Nwigbo, Lasisi U.E., and Ukaru Y.N. "Comparative Study of Tensile Properties of Hybrid AA6061/SIC/Carbonized Coconut Shell Micro and Nano Composites." International Journal of Mechanical and Civil Engineering 5, no. 1 (March 17, 2022): 10–24. http://dx.doi.org/10.52589/ijmce-yemppwep.
Повний текст джерелаXu, Xi-Hao, Hong Yan, Zhi-Wei Wang, and Xiu-Liang Zou. "Microstructure and mechanical properties of SiCp/ZL105 composite prepared by electromagnetic stirring." Advances in Mechanical Engineering 10, no. 12 (December 2018): 168781401882100. http://dx.doi.org/10.1177/1687814018821004.
Повний текст джерелаLi, Duo Sheng, Xian Liang Zhou, Ai Hua Zou, Xiao Zhen Hua, and Y. W. Yu. "Fabrication and Fracture Analyses of SiC Particulate-Reinforced Al Matrix Composites." Advanced Materials Research 764 (September 2013): 43–46. http://dx.doi.org/10.4028/www.scientific.net/amr.764.43.
Повний текст джерелаAntil, Parvesh, Sarbjit Singh, and Alakesh Manna. "Glass fibers/SiCp reinforced epoxy composites: Effect of environmental conditions." Journal of Composite Materials 52, no. 9 (July 31, 2017): 1253–64. http://dx.doi.org/10.1177/0021998317723448.
Повний текст джерелаPatcharawit, Tapany, Pradya Tongkhon, Aran Wiangsamut, Prinnapus Auisungnoen, and Nutthita Chuankrerkkul. "Powder Injection Molding of 20-40 Vol.% Silicon Carbide Particulate-Reinforced Aluminum Composites." Applied Mechanics and Materials 376 (August 2013): 17–22. http://dx.doi.org/10.4028/www.scientific.net/amm.376.17.
Повний текст джерелаKohara, S. "FABRICATION OF SiCp-AI COMPOSITE MATERIALS." Materials and Manufacturing Processes 5, no. 1 (January 1990): 51–62. http://dx.doi.org/10.1080/10426919008953228.
Повний текст джерелаGanesh, Radhakrishnan, J. Saranesh Kumar, R. Satya Prakash, and K. Chandrasekaran. "Investigation on Physical, Mechanical and Wear Properties of SiC Particulate Reinforced Aluminium Metal Matrix Composite." Applied Mechanics and Materials 787 (August 2015): 588–92. http://dx.doi.org/10.4028/www.scientific.net/amm.787.588.
Повний текст джерелаHao, Shi Ming, and Jing Pei Xie. "Hot Deformation Behaviors of SiCp/Al Composites." Advanced Materials Research 1058 (November 2014): 165–69. http://dx.doi.org/10.4028/www.scientific.net/amr.1058.165.
Повний текст джерелаOdiwo, Hammed, Bello kamilu Adeyemi, Abdulwahab Malik, Adebisi Abdulmumin Adetayo, Abdullahi Umma, Dodo Rayyan Mamuda, Md Abdul Maleque, and Suleiman Muhammad Uhuotu. "Study on the Optimization of Surface Modification Processing of SiCp and Tribological Properties of AA6061-SiCp based Composites." International Journal of Engineering Materials and Manufacture 8, no. 1 (January 20, 2023): 1–12. http://dx.doi.org/10.26776/ijemm.08.01.2023.01.
Повний текст джерелаGu, Peng, Chuan Min Zhu, Yin Yue Wu, and Andrea Mura. "Energy Consumption Prediction Model of SiCp/Al Composite in Grinding Based on PSO-BP Neural Network." Solid State Phenomena 305 (June 2020): 163–68. http://dx.doi.org/10.4028/www.scientific.net/ssp.305.163.
Повний текст джерелаJin, Rong Zhen, Nian Suo Xie, Jiao Jiao Li, and Jing Che. "Study on Compressive Properties of SiC Particle Reinforced ZAlCu5Mn Composite Foams." Applied Mechanics and Materials 395-396 (September 2013): 3–6. http://dx.doi.org/10.4028/www.scientific.net/amm.395-396.3.
Повний текст джерелаKim, Kyun Tak, and Yeong Sik Kim. "Wear Evaluation of SiCp Reinforced Al Matrix Composites Coatings." Advanced Materials Research 275 (July 2011): 178–81. http://dx.doi.org/10.4028/www.scientific.net/amr.275.178.
Повний текст джерелаZhang, Hao, Zhi Feng Zhang, Zhen Lin Zhang, Yue Long Bai, and Jun Xu. "Numerical Simulation on Filling Process of SiCp/A357 Composites." Materials Science Forum 898 (June 2017): 859–64. http://dx.doi.org/10.4028/www.scientific.net/msf.898.859.
Повний текст джерелаZhu, Jianhua, Lei Liu, Bin Shen, and Wenbin Hu. "Mechanical properties of Cu/SiCp composites fabricated by composite electroforming." Materials Letters 61, no. 13 (May 2007): 2804–9. http://dx.doi.org/10.1016/j.matlet.2006.10.051.
Повний текст джерелаQiu, X., Xiao Jun Wang, Ming Yi Zheng, and Kun Wu. "Processing, Microstructure and Mechanical Properties of SiCp/AZ91 Mg Matrix Composites Fabricated by Squeeze Casting." Materials Science Forum 546-549 (May 2007): 499–502. http://dx.doi.org/10.4028/www.scientific.net/msf.546-549.499.
Повний текст джерелаTao, Yi Yi, Xiao Lan Ge, Xiao Jing Xu, and Zuo Jiang. "Influences of SiC Particle Size and Content on the Mechanical Properties and Wear Resistance of the Composites with Al Matrix." Key Engineering Materials 375-376 (March 2008): 430–34. http://dx.doi.org/10.4028/www.scientific.net/kem.375-376.430.
Повний текст джерелаGhandvar, Hamidreza, Saeed Farahany, and Jamaliah Idris. "Wettability Enhancement of SiCp in Cast A356/SiCp Composite Using Semisolid Process." Materials and Manufacturing Processes 30, no. 12 (February 18, 2015): 1442–49. http://dx.doi.org/10.1080/10426914.2015.1004687.
Повний текст джерелаDeng, Xiao Yan, Jin Cheng Xu, Wei Hua, Liang Liang Tian, Li Jun Ai, and Jie Zhang. "Effects of Mechanical Alloying on the Mechanical and Tribological Properties of Al-Cu-Mg Matrix Composites Reinforced by Sub-Micron Silicon Carbide Particles." Advanced Materials Research 123-125 (August 2010): 51–54. http://dx.doi.org/10.4028/www.scientific.net/amr.123-125.51.
Повний текст джерела