Добірка наукової літератури з теми "Shaking and pressing machine"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Shaking and pressing machine".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Shaking and pressing machine"
Rote, Ajinkya M., Aishwarya S. Harode, Diksha B. Chaware, Shivani P. Chavhan, Mohit K. Katole, and Roshan R. More. "Automated Pressing Machine." International Journal for Research in Applied Science and Engineering Technology 10, no. 5 (May 31, 2022): 1562–66. http://dx.doi.org/10.22214/ijraset.2022.42518.
Повний текст джерелаAvrorov, V. A., M. A. Redchenko, and O. A. Murashkina. "Drum Pressing Machine for Pressing Moisture-Containing Industrial Waste." Chemical and Petroleum Engineering 57, no. 1-2 (April 30, 2021): 122–28. http://dx.doi.org/10.1007/s10556-021-00904-1.
Повний текст джерелаSun, Xiao Juan, and Jian Run Zhang. "Low-Frequency Shaking of the Construction Machine Cab and Design of Vibration Isolators for Protecting." Applied Mechanics and Materials 141 (November 2011): 49–53. http://dx.doi.org/10.4028/www.scientific.net/amm.141.49.
Повний текст джерелаLiu, Xin, Chun Dong Zhu, Xi Jiang, and Yi Zhang. "Influence of eccentricity of double eccentricity sleeves on the movements of swing head in rotary forging press." Mechanical Sciences 10, no. 1 (June 27, 2019): 321–30. http://dx.doi.org/10.5194/ms-10-321-2019.
Повний текст джерелаGaran, Martin, Vladimír Chmelko, Miroslav Šulko, and Miloš Musil. "Fatigue Failure of a Pressing Machine." Applied Sciences 11, no. 1 (January 4, 2021): 398. http://dx.doi.org/10.3390/app11010398.
Повний текст джерелаChernetsov, D. A., V. P. Kapustin, and N. V. Kiselev. "Parameter optimization of machine for potato beetles shaking off." Traktory i sel hozmashiny 82, no. 5 (May 15, 2015): 33–34. http://dx.doi.org/10.17816/0321-4443-65454.
Повний текст джерелаChiou, S.-T., and T. H. Davies. "Partial cancellation of shaking force harmonics by cam modification." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 211, no. 4 (April 1, 1997): 253–63. http://dx.doi.org/10.1243/0954406971522024.
Повний текст джерелаKhanh Dien, Le, Tran Van Hung, Hoang Duc Lien, and Svetlin Antonov. "A Design of Bamboo Plywood Pressing Machine." Science & Technology Development Journal - Engineering and Technology 3, SI1 (April 12, 2020): First. http://dx.doi.org/10.32508/stdjet.v3isi1.735.
Повний текст джерелаLiu, Tian-Hu, Reza Ehsani, Arash Toudeshki, Muna Abbas, and Xiang-Jun Zou. "Shaking Functionality Evaluation of Four Different Types of Citrus Canopy-Shaker Tines." Applied Engineering in Agriculture 34, no. 5 (2018): 809–17. http://dx.doi.org/10.13031/aea.12303.
Повний текст джерелаSumi, Naoki. "Operating Experience of Wire Shaking Equipment in Multilayer Linerboard Machine." JAPAN TAPPI JOURNAL 69, no. 1 (2015): 63–67. http://dx.doi.org/10.2524/jtappij.69.63.
Повний текст джерелаДисертації з теми "Shaking and pressing machine"
Буряк, Андрій Андрійович. "Розроблення технологічного процесу виготовлення чавунного виливка «Корпус», організація та планування формувального відділення ливарного цеху". Bachelor's thesis, КПІ ім. Ігоря Сікорського, 2021. https://ela.kpi.ua/handle/123456789/43671.
Повний текст джерелаThesis project: pages, 22 tables, 10 figures, 9 references. The object of design - the technological process of manufacturing a carbon steel casting "Gearbox housing" weighing 3,04 kg by casting in disposable sand claymolds. The subject of design - the technology of the mold and the organization of the molding department of the foundry. Design results - the technology of the casting mold for a given casting is developed, the technical planning of the molding department and the calculation ofthe unit of the casting equipment are performed. Design results - can be recommended at foundries with a similar nature of production. Field of use - enterprises of agricultural engineering, military-industrial complex, etc.
Härenby, Deak Elliot. "Investigation of Machine Learning Methods for Anomaly Detection and Characterisation of Cable Shoe Pressing Processes." Thesis, Luleå tekniska universitet, Institutionen för system- och rymdteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-82721.
Повний текст джерелаChiou, Shen-Tarng. "Studies of retrofit and new designs for reducing the shaking force of a can body-making machine." Thesis, Loughborough University, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.305649.
Повний текст джерелаUzuncakmak, Gokturk Emre. "Design And Production Of A Dissimilar Channel Angular Pressing System To Obtain High Strength Aluminum Alloy Sheets." Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/3/12610609/index.pdf.
Повний текст джерелаRoupec, Michal. "Konstrukční návrh jednoúčelového stroje na lisování valivých ložisek do kladkovnic." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230542.
Повний текст джерелаPrintsypar, Galina [Verfasser], and Oleg [Akademischer Betreuer] Iliev. "Mathematical Modeling and Simulation of Two-Phase Flow in Porous Media with Application to the Pressing Section of a Paper Machine / Galina Printsypar. Betreuer: Oleg Iliev." Kaiserslautern : Universitätsbibliothek Kaiserslautern, 2012. http://d-nb.info/1022804308/34.
Повний текст джерелаJuriga, Jakub. "Návrh lisovacích přípravků na manifoldové sestavy kondenzátoru automobilové klimatizace." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254278.
Повний текст джерелаТесличко, Іван Андрійович, Святослав Юрійович Хабаль, Ivan Teslychko та Sviatoslav Khabal. "Автоматизація технологічного процесу вібропресування фасадної плитки (комплексна тема)". Bachelor's thesis, Тернопільський національний технічний університет ім. І. Пулюя, Факультет прикладних інформаційних технологій та електроінженерії, Кафедра автоматизації технологічних процесів і виробництв, 2021. http://elartu.tntu.edu.ua/handle/lib/35499.
Повний текст джерелаВ даній кваліфікаційній роботі автоматизовано технологічний процес пресування керамічної та бетонної плитки. Описано технологічні процеси виготовлення бетонних виробів, а також конструкцію складових частин напівавтомата що реалізує ці процеси. Зокрема розроблено креслення автоматизованої установки для вібпропресування плитки, описано роботу її складових частин, монтаж, регулювання, налагодження і пуск, а також розроблено дозатор для точного дозування сипучих матеріалів. Розраховано дозатор, обмотку магнітопроводу віброзбудників, блок живлення, стабілізатор напруги, випрямляч мостової схеми. Розроблена у кваліфікаційній роботі установка дозволяє виготовляти плитку з глини, бетону, гіпсового каменю та інших будівельних матеріалів методом імпульсного пресування.
In this qualification work the technological process of pressing ceramic and concrete tiles is automated. Technological processes of production of concrete products, and also a design of components of the semiautomatic device realizing these processes are described. In particular, the drawing of the automated installation for vibropressing of a tile is developed, the work of its components, installation, adjustment, adjustment and start-up is described, and also the batcher for exact dosing of loose materials is developed. The batcher, the winding of the magnetic circuit of the vibrators, the power supply, the voltage stabilizer, the rectifier of the bridge circuit are calculated. The installation developed in qualification work allows to make a tile from clay, concrete, gypsum stone and other building materials by a method of pulse pressing.
Вступ 6 1 Аналітична частина 9 1.1 Методи обробки сировини для виготовлення плитки з глини та бетону 9 1.2 Методи ущільнення сировини для виготовлення плитки 13 2 Проєктна частина 15 2.1 Формування компонентів бетону 15 2.2 Технічний аналіз якості бетону 22 2.3 Технологія виготовлення бетонних сумішей 33 2.4 Технологія виготовлення бетонних виробів 35 2.5 Технічні характеристики установки 44 2.6 Конструкція і робота пресової установки та її складових частин 46 2.7 Опис конструкції модуля дозатора 54 2.8 Розрахунок дозатора 56 2.9 Опис роботи схеми керування 68 2.10 Розрахунок блока живлення 75 2.11 Алгоритм і циклограма роботи установки 83 3 Спеціальна частина 85 4 Безпека життєдіяльності, основи охорони праці 96 4.1 Методи очищення повітря на дільниці цеху від шкідливих виділень 96 4.2 Розрахунок захисного заземлюючого пристрою для обладнання дільниці цеху 99 4.3 Підвищення стійкості роботи підприємства у військовий час 101 4.4 Оцінка підготовки підприємства до відновлення виробництва 103 4.5 Надійність системи матеріально-технічного постачання і виробничих зв’язків 104 Висновок 108 Література 109
Риляков, Ілля Леонідович. "Підвищення ефективності технології виробництва сигаретного паперу". Master's thesis, КПІ ім. Ігоря Сікорського, 2020. https://ela.kpi.ua/handle/123456789/38492.
Повний текст джерелаTheme actuality. Expansion of the raw material base of the pulp and paper industry of Ukraine due to the use of pulp from agricultural waste. Production of cigarette paper and ensuring the stability of its quality through the use of the latest advances in paper production and modern technologies for pulp production. The purpose and objectives of the study. The purpose of the dissertation is to study the features of cigarette paper and improve the technology of its production to improve product quality. To achieve the goal, you need to solve the following tasks: - acquaintance with the properties of cigarette paper; - to obtain straw cellulose by oxidative-organosolvent method of delignification and to investigate its paper-forming properties; - to improve the technological process of cigarette paper production; - select and calculate the main technological equipment. - to analyze the potential of this work for use in startups. Object of study: the process of making document paper. Subject of study: processes of production of straw cellulose and production of cigarette paper. Methods of study: technological parameters of the process of delignification of wheat straw chips, parameters of the processes of forming, pressing, gluing and drying of paper web. The practical value of the obtained results: the proposed technological stream for the production of cigarette paper with the use of straw pulp will improve the quality of finished products and reduce its cost. Approval of the thesis results: The main provisions of the dissertation were reported and discussed at the international international conference IV international scien-tific and practical conference. The world of science and innovation, London, United Kingdom, 11-13 November, 2020.
Huang, Li-Min, and 黃麗敏. "Chemical Scrubbing of fume gas stream from corn germ pressing machine." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/00551937887800697962.
Повний текст джерела國立中山大學
環境工程研究所
90
Abstract This study armed to develop a chemical scrubbing process to treat an emitted odorous gas stream from a corn-germ oil-pressing machine. Analytical results demonstrated that the gas contains a total VOC (volatile organic compound) concentration of 323 to 2,100 ppm calibrated as methane. Major VOC ingredients are aldehydes, organic acids, and mercaptans. Ozone, sodium hypochlorite (NaOCl), and hydrogen peroxide (H2O2) were used as oxidants for VOCs other than aldehydes and sodium bisulfite (NaHSO3) was used as a reductant for aldehydes. Experimental setup used in this study consisted of a set of four-stage-in-series scrubbers for VOC oxidation and a set of 18-L bubble column for aldehyde reduction. Each stage of the scrubber was constructed from a 25-cm x 140-cm (OD x H) plastic column packed with 2”-diameter plastic packings to a height of 90 cm. Experiment results showed that suitable conditions for the VOC and odor removal in the oxidation tower are: (1) QL/QG (flowrate ratio of circulating liquid and gas) = 0.0024-0.0035 m3 liquid/m3 gas, (2) dose rate of NaOCl solution (10 % effective chlorine) = 0.0125-0.015 L/m3 gas, (3) pH of the circulating liquid = 7.5-8.0, and (4) supplemental water flowrate = 2.4-5.0 L/m3 gas. Those for the reduction of the residual aldehydes and other odorous compounds are: (1) concentration of NaHSO3 scrubbering solution = 2,156 mg/L as SO2 and (2) pH of the NaHSO3 solution = 5.0-6.0. Under the conditions, experimental data demonstrated that the process could reduce H2S from 0-5.5 to 0 ppm, NH3 from 0.1-0.4 to 0-0.1 ppm, phenols from 0-2.0 to 0 ppm, acids from 15-25 to 0 ppm, acetaldehyde from 10-34 to 0-10 ppm, amines from 0.1 to 0.1 ppm, and mercaptans from 0.5-10.5 ppm to 0 ppm. Overall VOC removal efficacy was 85-100 %. Effluent gas from the oxidation stage had a chlorine smell, while that from the reduction one was odorless. Based on the results from the pilot study, a full-scale plant with a waste gas flow rate 105 m3/min was proposed. It was estimated that the full-scale plant has an equipment cost of US$ 45,000, and an operating cost of around US$ 110/(8-hr day) or US$ 0.75/(1,000 m3 waste gas).
Книги з теми "Shaking and pressing machine"
Thomson, Erica. Pressing matters: A machine knitter's guide to pressing andfinishing. Birmingham: Erica Thomson, 1990.
Знайти повний текст джерелаThomson, Erica. Pressing Matters: Machine Knitters Guide to Pressing and Finishing. Erica Thomson, 1991.
Знайти повний текст джерелаGoodman, Adam. The Deportation Machine. Princeton University Press, 2020. http://dx.doi.org/10.23943/princeton/9780691182155.001.0001.
Повний текст джерелаChiou, Shen-Tarng. Studies of retrofit and new designs for reducing the shaking force of a can body-making machine. 1988.
Знайти повний текст джерелаParker, Philip M. The 2007-2012 World Outlook for Manufacturing Punching, Sheering, Bending, Forming, Pressing, Forging and Die-Casting Machines and Other Metal Forming Machine Tools Excluding Hand Tools. ICON Group International, Inc., 2006.
Знайти повний текст джерелаThe 2006-2011 World Outlook for Manufacturing Punching, Sheering, Bending, Forming, Pressing, Forging and Die-Casting Machines and Other Metal Forming Machine Tools Excluding Hand Tools. Icon Group International, Inc., 2005.
Знайти повний текст джерелаAllen, Hilary J. Driverless Finance. Oxford University Press, 2022. http://dx.doi.org/10.1093/oso/9780197626801.001.0001.
Повний текст джерелаЧастини книг з теми "Shaking and pressing machine"
Saouma, Victor E., and M. Amin Hariri-Ardebili. "Metamodeling and Machine Learning." In Aging, Shaking, and Cracking of Infrastructures, 485–515. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-57434-5_20.
Повний текст джерелаAcevedo, Mario, Teresa Orvañanos, and Ramiro Velázquez. "Shaking Moment Balancing of a Four-Bar Mechanism Using Actuation Redundancy." In Advances in Mechanism and Machine Science, 3319–27. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20131-9_328.
Повний текст джерелаvan der Wijk, V., and J. L. Herder. "On the Development of Low Mass Shaking Force Balanced Manipulators." In Advances in Robot Kinematics: Motion in Man and Machine, 411–20. Dordrecht: Springer Netherlands, 2010. http://dx.doi.org/10.1007/978-90-481-9262-5_44.
Повний текст джерелаvan der Wijk, V., and J. L. Herder. "The Method of Principal Vectors for the Synthesis of Shaking Moment Balanced Linkages." In New Trends in Mechanism and Machine Science, 399–407. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-4902-3_43.
Повний текст джерелаAdanur, Sabit. "Pressing." In Paper Machine Clothing, 153–90. CRC Press, 2017. http://dx.doi.org/10.1201/9780203744499-3.
Повний текст джерелаSchrad, Mark Lawrence. "The Battle for a Dry America." In Smashing the Liquor Machine, 487–526. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780190841577.003.0017.
Повний текст джерелаRoselli, Ivan, Vincenzo Fioriti, Marialuisa Mongelli, Alessandro Colucci, and Gerardo De Canio. "Machine Vision-Based Application to Structural Analysis in Seismic Testing by Shaking Table." In Optoelectronics in Machine Vision-Based Theories and Applications, 269–300. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-5751-7.ch010.
Повний текст джерелаVieira, Armando. "Business Applications of Deep Learning." In Ubiquitous Machine Learning and Its Applications, 39–67. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-2545-5.ch003.
Повний текст джерелаYip, Fu Faustina, and Kin Soon Lim. "From Backwater to Megacity." In Handbook of Research on Special Economic Zones as Regional Development Enablers, 186–205. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-7619-9.ch010.
Повний текст джерелаGarigipati, Rama Krishna, Kasula Raghu, and K. Saikumar. "Detection and Identification of Employee Attrition Using a Machine Learning Algorithm." In Advances in Social Networking and Online Communities, 120–31. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-9640-1.ch009.
Повний текст джерелаТези доповідей конференцій з теми "Shaking and pressing machine"
Mohamed, Meftah Mahmoud, and Jason Gu. "PLC controller for hydraulic pressing machine." In 2015 27th Chinese Control and Decision Conference (CCDC). IEEE, 2015. http://dx.doi.org/10.1109/ccdc.2015.7161755.
Повний текст джерелаYuan-Jun, Lv. "The Control of Paperboard Pressing Machine." In 2012 Fifth International Conference on Intelligent Computation Technology and Automation (ICICTA). IEEE, 2012. http://dx.doi.org/10.1109/icicta.2012.169.
Повний текст джерелаWang, Chuanli, Hui Zhang, Caofeng Yu, and Xiaolei Wu. "Study of pressing machine pressure relief characteristics based on AMESim." In Seventh International Symposium on Precision Mechanical Measurements, edited by Liandong Yu. SPIE, 2016. http://dx.doi.org/10.1117/12.2214079.
Повний текст джерелаWanla, Somnerk. "The Design and Build of Popped Rice Sheet Pressing Machine." In The 12th National Conference on Technical Education and The 7th International Conference on Technical Education. KMUTNB, Bangkok, Thailand, 2020. http://dx.doi.org/10.14416/c.fte.2020.03.016.
Повний текст джерелаWidiyanti, Faqih Fadillah, Alfian Widi Rahmawan, Ahmad Sanusi, Almira Sifak Fuziah Narariya, and Rosabiela Irfa Andina. "Designing an automatic tofu pressing and molding machine for home industry." In 2017 5th International Conference on Electrical, Electronics and Information Engineering (ICEEIE). IEEE, 2017. http://dx.doi.org/10.1109/iceeie.2017.8328755.
Повний текст джерелаShimomukai, T., M. Yoshioka, and H. Yanagimoto. "Estimation of PSF for a Shaking Blurred Image Using GA." In 2011 Tenth International Conference on Machine Learning and Applications (ICMLA 2011). IEEE, 2011. http://dx.doi.org/10.1109/icmla.2011.165.
Повний текст джерелаWei, Zhang, and Wang Xiaowen. "Research on hot-pressing machine control system based on PLC and Kingview." In 2015 27th Chinese Control and Decision Conference (CCDC). IEEE, 2015. http://dx.doi.org/10.1109/ccdc.2015.7161807.
Повний текст джерелаHong-liang, Yang, Liu Xin-le, Xu Guo-bao, Xu Zhi-gang, and Ma Jin-feng. "Design of eccentric bunghole cap screwing-pressing machine based on robot vision technique." In 2015 IEEE Advanced Information Technology, Electronic and Automation Control Conference (IAEAC). IEEE, 2015. http://dx.doi.org/10.1109/iaeac.2015.7428596.
Повний текст джерелаLiu, Lili, and Jia Wan. "The design and implementation of embedded computer control system in hot-pressing machine." In Education (ICCSE 2010). IEEE, 2010. http://dx.doi.org/10.1109/iccse.2010.5593406.
Повний текст джерелаMuramatsu, N. "Transient Torque Produced in Arm Shaft of an Industrial Sewing Machine." In ASME 1989 Design Technical Conferences. American Society of Mechanical Engineers, 1989. http://dx.doi.org/10.1115/detc1989-0108.
Повний текст джерелаЗвіти організацій з теми "Shaking and pressing machine"
Machine operator dies after becoming caught in a shirt pressing machine - Massachusetts. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, December 2003. http://dx.doi.org/10.26616/nioshsface02ma002.
Повний текст джерела