Дисертації з теми "Set of elements of an offense"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-31 дисертацій для дослідження на тему "Set of elements of an offense".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Прохоров, К. О. "Адміністративна відповідальність за порушення порядку подання декларації про доходи та ведення обліку доходів і витрат". Thesis, МАУП, 2021. http://openarchive.nure.ua/handle/document/14724.
Повний текст джерелаNagpal, Charu. "A delay-efficient radiation-hard digital design approach using code word state preserving (cwsp) elements." Texas A&M University, 2008. http://hdl.handle.net/1969.1/85906.
Повний текст джерелаKEE, SOONBOK. "Elements of Continuity in Alexander Scriabin's Musical Language: An Analysis of Selected Piano Preludes." University of Cincinnati / OhioLINK, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1204677896.
Повний текст джерелаСлиш, М. В. "Поняття рецидиву кримінального правопорушення". Thesis, Чернігів, 2021. http://ir.stu.cn.ua/123456789/23130.
Повний текст джерелаВ сучасних умовах актуальність дослідження рецидиву кримінального правопорушення у кримінальному праві України зумовлюється підвищеною суспільною небезпечністю даного явища. Як наслідок, підвищена суспільна небезпечність рецидивної злочинності в цілому полягає в тому, що вона виражає таку якість злочинності, як її стійкість, засвідчуючи вперте небажання низки осіб поводити себе відповідно до прийнятих у суспільстві норм, надання переваги кримінальних варіантів вирішення такими особами своїх проблем, незважаючи на вжиті до них заходи. Застосування покарання є останнім стримуючим засобом у системі протидії злочинності і її серцевині – рецидивній злочинності. Не можна закликати до толерантності щодо рецидивістів, які вчинили чергове кримінальне правопорушення. Тому, закономірно, що толерантність повинна мати межі. Не можна загравати зі злом, це погано закінчується. Таким чином, враховуючи вищевикладене, дослідження особливостей рецидиву кримінального правопорушення в кримінальному праві України має не тільки теоретичне, але й практичне значення, що й обумовлює актуальність обраної теми дослідження. В Розділі 1 випускної кваліфікаційної роботи досліджуються поняття і ознаки рецидиву кримінального правопорушення, кримінально-правове значення рецидиву кримінального правопорушення, рецидив кримінальних правопорушень за законодавством зарубіжних країн. В Розділі 2 випускної кваліфікаційної роботи проаналізовано особливості відмежування рецидиву від одиничного кримінального правопорушення, відмежування рецидиву від повторного правопорушення а також відмежування рецидиву від сукупності кримінальних правопорушень. Розділ 3 випускної кваліфікаційної роботи присвячено аналізу проблем кваліфікації рецидиву кримінальних правопорушень та судової практики рецидиву кримінальних правопорушень (на прикладі судових проваджень Північного регіону). Основні положення та висновки випускної кваліфікаційної роботи обговорювалися під час Круглого столу «Розвиток правоохоронної системи України в сучасних умовах» (20 листопада 2020 року, м. Чернігів).
In modern conditions, the relevance of the study of recidivism in the criminal law of Ukraine is due to the increased social danger of this phenomenon. As a result, the increased social danger of recidivism in general is that it expresses such a quality of crime as its persistence, demonstrating the stubborn reluctance of some people to behave in accordance with accepted norms in society, giving preference to criminal options for solving such problems, despite on the measures taken against them. The use of punishment is the last deterrent in the system of combating crime and its core - recidivism. Tolerance cannot be called for recidivists who have committed another criminal offense. Therefore, it is natural that tolerance should have limits. You can't flirt with evil, it ends badly. Thus, taking into account the above, the study of the features of recidivism in the criminal law of Ukraine has not only theoretical but also practical significance, which determines the relevance of the chosen research topic. In Section 1 of the final qualifying work the concepts and signs of recidivism of criminal offense, criminal-legal value of recidivism of criminal offense, recidivism of criminal offenses under the legislation of foreign countries are investigated. Section 2 of the final qualifying work analyzes the features of delimitation of recidivism from a single criminal offense, delimitation of recidivism from a repeated offense and delimitation of recidivism from a set of criminal offenses. Section 3 of the final qualification work is devoted to the analysis of the problems of qualification of recidivism of criminal offenses and judicial practice of recidivism of criminal offenses (on the example of court proceedings of the Northern region). The main provisions and conclusions of the final qualifying work were discussed during the Round Table "Development of the law enforcement system of Ukraine in modern conditions" (November 20, 2020, Chernihiv).
MOSELEY, BRIAN CHRISTOPHER. "INTEGRATING ANALYTICAL ELEMENTS THROUGH TRANSPOSITIONAL COMBINATION IN TWO WORKS BY GEORGE CRUMB." University of Cincinnati / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1187014156.
Повний текст джерелаHarp, Michael T. "Developing a Useful Set of Proxy Elements for the Targeting and Exploration of Gold Deposits, Black Hills, South Dakota." University of Akron / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=akron1289841053.
Повний текст джерелаMelandri, Giovanni. "Study of a novel solution to obtain controllable stiffness for beam-like elements." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amslaurea.unibo.it/20196/.
Повний текст джерелаSaad, Ali. "Modélisation par level set des macroségrégations induites par le retrait à la solidification." Thesis, Paris Sciences et Lettres (ComUE), 2016. http://www.theses.fr/2016PSLEM026/document.
Повний текст джерелаMacrosegregation is key defect in industrial casting processes. During solidification, solute redistribution at the scale of microstructure, also known as microsegregation, take place with complex interactions, in order to form one or more solid phases. These interactions between microsegregation and movements of liquid and solid phases may lead to macrosegregations. These solute heterogeneities spanning on a larger scale, may result in a bad casting quality. In this thesis, we propose a numerical model to simulate and predict macrosegregations occurring in the centre of multicomponent alloys, caused by thermal and solutal variations in the liquid phase. First, we assume that the metallic alloy solidifies with a constant volume. In this context, we study the influence of thermosolutal convection on the formation of channel segregations, at different modelling scales. The second part of this modelling work consider solidification while the metallic alloy's volume is decreasing, mainly due to overall density variation, also known as solidification shrinkage, possibly leading to the so-called inverse segregation phenomenon, appearing on the alloy's skin. In the context of solidification shrinkage, the shape of the metal's boundary with surrounding gases varies according to a constantly changing solidification path due to macrosegregation. The level set method is therefore used to track its evolution with time. Composition predictions, coupled with thermodynamic database mappings for more accurate multicomponent solidification paths, are analysed and compared to existing experimental setups. Finally, simulations of a reduced-gravity solidification cases are performed, mocking an experimental benchmark from the CCEMLCC project launched by the European Space Agency. The results after complete solidification show acceptable agreement for the final shape, compared to experimental results. These computations were performed with binary, ternary and quaternary approximations of the same steel grade which was used in reduced-gravity experiments
Malczewski, Eric. "The elements of "social" science: an essay concerning the set of elemental empirical phenomena that underlie and distinguish social scientific inquiry." Thesis, Boston University, 2012. https://hdl.handle.net/2144/32032.
Повний текст джерелаPLEASE NOTE: Boston University Libraries did not receive an Authorization To Manage form for this thesis or dissertation. It is therefore not openly accessible, though it may be available by request. If you are the author or principal advisor of this work and would like to request open access for it, please contact us at open-help@bu.edu. Thank you.
Seeking to contribute clarity in understanding the essential characteristics of social science, the thesis this essay defends is that the legitimacy of "social science" as a distinct patterned activity oriented to attaining objective knowledge of humanity depends upon the recognition of its characteristic set of phenomena and that this set is comprised of meaningful behavior; this set was isolated by Max Weber in his major theoretical work and is the central subject matter of his empirical studies. Weber's approach and view is compared with that of the contemporary Chicago historian William H. Sewell, Jr.; specifically, examination of Sewell's view on the nature of the "social" leverages the importance of Weber's concept of "action" underlying "social action" and draws attention to the elemental importance of "action" for social science. Chapter 1 discusses science seen as a "social institution." In this context, the goal or end of "social science" is examined, and a discussion of Geertz' concept "cultural system" is introduced so as to offer clarity concerning the value of the concept of "social institution." Delineating the "social" for "social science" is argued to be essential for the testing of social scientific theories grounded in empirical phenomena. Chapter 2 engages Sewell's approach to the question of the "social" with a view toward the status of his response as an ontological claim and examines his definition of "semiotic practices." A theoretical discussion of the concepts of "action" and "social action" rooted in Weber's Economy and Society provides the framework for Chapter 3, and a discussion of the importance of explanation and understanding in Weber's view is developed. The central argument here is that the concept of "action" is elemental to Weber's approach. Chapter 4 looks forward and discusses the convergence of thought between Sewell and Max Weber and argues that the merits of this view are suggestive for contemporary scholarship.
2031-01-02
Fausty, Julien. "Towards the full field modeling and simulation of annealing twins using a Finite Element Level Set method." Thesis, Université Paris sciences et lettres, 2020. http://www.theses.fr/2020UPSLM022.
Повний текст джерелаThe design of nickel based superalloy disks in an industrial setting is a stringent process which must produce critical components of the aircraft engine. Improving these components is no small feat given the extreme mechanical and thermalconstraints endured by these types of parts. One of the most important aspects of the design is the microstructure of the unerlying material. As such, the engineers who design these machines have a specific need for models capable of predicting microstructural evolution in metallic materials during the forging process. This work aims to improve on the existing Level Set Finite Element framework for microstructural evolution by including enriched descriptions of grain boundaries. These enriched characterizations are needed in order to take into account special boundaries - such as the twin boundary - which can be observed in great number in forged superalloys. This effort is concentrated on integrating arbitrary values for the grain boundary energy density into the numerical models.This enhancement of the model lies not only in the numerical aspects but also in the underlying mathematical formulation. By including supplemental terms in the expression of the velocity of a migrating grain boundary, this investigation has found, using analytical and non-analytical benchmarks, that the new approach is able to take into account a host of phenomena. Evidence of both orientation pinning and torque applied to triple junctions has been found in virtually annealed polycrystals. Also, the model has proven to be more capable of taking into account the singular behavior of the twin boundary then previous iterations of the method
Scholtes, Benjamin. "Développement d'un modèle level set performant pour la modélisation de la recristallisation en 3D." Thesis, Paris Sciences et Lettres (ComUE), 2016. http://www.theses.fr/2016PSLEM083/document.
Повний текст джерелаMechanical and functional properties of metallic materials are strongly related to their microstructures, which are themselves inherited from thermal and mechanical processing. Being able to accurately predict and simulate the microstructure and its heterogeneities after complex forming paths recently became crucial for the metallurgy industry. This is also a real challenge from a numerical point of view which highlights the importance of digital materials in new modeling techniques. In this work, we focus on a recent front-capturing full field model based on the level set (LS) method within a finite element (FE) framework to model recrystallization mechanisms.The strengths of this approach comparatively to the state of the art have motivated the development of a software package called DIGIMU® by the company TRANSVALOR with the support of major industrial companies. However, the main drawback of this approach, common with other front-capturing full field approaches working on unstructured FE meshes, is its important computational cost, especially in 3D.Main purpose of this work was finally to drastically improve the numerical cost of the considered LS-FE formulation in context of unstructured FE meshes. New generic numerical developments have been proposed to improve the global efficiency of the model. The existing 2D LS formulation, already used to model grain growth, static recrystallization and the Smith-Zener pinning effect, has been extended and improved in order to model these mechanisms in 3D for large-scale polycrystals with reasonable computational costs
Chen, Qiang. "Modélisation numérique thermomécanique de fabrication additive par fusion sélective de lit de poudre par laser : Application aux matériaux céramiques." Thesis, Paris Sciences et Lettres (ComUE), 2018. http://www.theses.fr/2018PSLEM004/document.
Повний текст джерелаThe application of SLM process is limited by the difficulty of process control. Its application to ceramics is especially challengeable due to their weak absorption to laser and weak resistance to thermal shock. The mastery of this process requires a full understanding of heat transfer, fluid dynamics in melt pool and solid mechanics. In this work, we propose a numerical model for the simulation of SLM process applied to ceramics. The model is developed at the track scale and with the assumption of continuous powder bed. It is based on level set method and multiphase homogenization, with which we are able to follow the evolution of gas/material interface and phase transformation. Simulations are performed to study the influence of material properties and process parameters on temperature, melt pool shape, fluid dynamics and solid mechanics. Apart from the laser power and scanning speed, material absorption is also found to be important to the thermal behavior and the melt pool shape. With the fluid dynamics, convex shape of track cross section is achieved under surface tension. Besides that, liquid droplets collapsing formed by the melting of powder create melt pool instability when falling, thus leading to track irregularity after solidification. The Marangoni effect, caused by surface tension gradient at gas/material interface, is investigated. Its influence on temperature distribution, melt pool shape and track regularity is recognized. One interesting finding is the smoothing effect of track surface with negative ∂γ/∂T. When combine surface tension with scanning speed, track surface becomes more irregular with the increase of scanning speed. The well-known balling effect is reproduced with high scanning speed. This can be helpful to find the regime for regular track shape with given laser power and scanning speed. Cracking defect is deleterious in additive manufacturing. The use of an auxiliary laser can help to avoid this defect by decreasing the maximum tensile stress. The process mode of this auxiliary laser remains an interesting subject to be studied and some guidelines have been given by the presented simulations. The model is validated by the comparison of melt pool shape with experiments under different process conditions. Simulations can also reveal the tendency of track surface variation for certain cases. By the application to multi-track deposition, the influence of hatch distance on layer surface, temperature and stress evolution is emphasized
Birdwell, John Cody. "The Utilization of Folk Song Elements in Selected Works by Ralph Vaughan Williams and Percy Grainger with Subsequent Treatment Exemplified in the Wind Band music of David Stanhope." Thesis, University of North Texas, 1996. https://digital.library.unt.edu/ark:/67531/metadc278028/.
Повний текст джерелаShiferaw, Benjamin. "Modélisation de la fissuration en milieu viscoélastique par approche Thick Level Set pour application au cas des enrobés bitumineux." Thesis, Ecole centrale de Nantes, 2019. http://www.theses.fr/2019ECDN0049.
Повний текст джерелаFracture of asphalt concrete (AC) layers is a major mode of deterioration in pavements, whose understanding of the various mechanisms requires the development of theoretical models and numerical tools. In this context, the research focuses on damage and fracture in thermo-viscoelastic materials. Hence, a local damage model is developed based on the principle of effective stresses and the Poynting-Thomson rheological law. The damage criterion considered relies on the elastic energy release rate. This model is then regularized according to the Thick Level Set (TLS) approach. The semi-analytical study of the 1D rod subjected to monotonous direct tension is performed to investigate the ability of the model to mimic the main experimental observations made for AC materials. An algorithm dedicated to the finite element solution of 2D problems is proposed and implemented subsequently in the eXlibris numerical code developed at ECN. The potential of this model to simulate damage and crack growth from initiation to collapse is demonstrated through the example of a viscoelastic beam under three-point bending test loading conditions. The simulations reflect the more or less brittle/ductile nature of the test results observed on AC materials depending on temperature and the loading rate. This work offers a theoretical and numerical basis for future applications in pavement mechanics
Pino, Munoz Daniel Humberto. "High-performance computing of sintering process at particle scale." Phd thesis, Ecole Nationale Supérieure des Mines de Saint-Etienne, 2012. http://tel.archives-ouvertes.fr/tel-00843105.
Повний текст джерелаAldaher, Sébastien. "An Attempt to Set A design Base for post-conflict housing in the historic core of Homs, Syria." Thesis, Malmö universitet, Institutionen för Urbana Studier (US), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-44261.
Повний текст джерелаZaragoci, Jean-François. "Simulation numérique directe multiphasique de la déformation d’un alliage Al-Cu à l’état pâteux – Comparaison avec des observations par tomographie aux rayons X in situ en temps réel." Thesis, Paris, ENMP, 2012. http://www.theses.fr/2012ENMP0088/document.
Повний текст джерелаHot tearing is a major defect arising during solidification of aluminium alloys. This defect is associated with the inability of liquid to feed areas where voids have started to appear, not allowing to heal small defects before they grow bigger. To understand hot tearing, it is mandatory to develop a good knowledge of the semi-solid mechanical behaviour. It is thus very useful to carry out X-ray microtomographies experiments and mechanical simulations on representative elementary volumes. In this work, we couple the both approaches by initialising a finite element simulation with the help of microtomography data obtained during an isothermal tensile testing of an aluminium-copper alloy in the mushy state. This innovative approach gives a direct access to the experimental reality and allows comparisons of numerical and experimental evolutions of the sample. We explain in a first time how to get the numerical representation thanks to a marching cubes algorithm and the immersed volume method. Then, we present our numerical model for which we solve the Stokes equations in a monolithic way. Once the velocity computed in all the solid, liquid and gaseous phases, we use a level set method in a Eulerian formalism to obtain the morphological evolution of our numerical sample. Despite the model simplicity, numerical and experimental results show a reasonable agreement concerning the air propagation inside the sample
Tossoukpe, Howatchinou. "Modélisation et simulation du frittage de matériaux dopés et de multimatériaux à l'échelle de la microstructure." Phd thesis, Ecole Nationale Supérieure des Mines de Saint-Etienne, 2013. http://tel.archives-ouvertes.fr/tel-00979312.
Повний текст джерелаKlonk, Steffen. "Modélisation numérique du chauffage par induction de pièces à géométrie complexe." Phd thesis, Ecole Nationale Supérieure des Mines de Paris, 2013. http://pastel.archives-ouvertes.fr/pastel-00982312.
Повний текст джерелаShen, Hong. "Non-deterministic analysis of slope stability based on numerical simulation." Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola", 2012. http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-96370.
Повний текст джерелаPercie, du Sert Maxime. "Résultats de généricité pour des réseaux." Thesis, Paris 11, 2014. http://www.theses.fr/2014PA112130/document.
Повний текст джерелаA coupled cell network consists in a directed graph, with each node (also called cell) representing a set of variables and with each arrow representing the interaction between these variables. Coupled cell networks play an important role in the modeling of phenomena in neurology, economics or biology, etc.. Let G be a directed graph with N nodes. A mapping f=(f_1,...,f_N) of X=X_1×...×X_N to X (where X_j=R^dj) is admissible, if for each node j, f_j(x) depends on x_i only if i->j is an arrow of G. In this thesis, we show that if the graph G is strongly connected and self-dependant, generically with respect to f in the class of admissible C¹-functions, the dynamical system generated by the differential equation x'(t)=f(x(t)) satisfies the Kupka-Smale property, that is all the critical elements (i.e. the equilibria and periodic orbits) are hyperbolic and the stable and unstable manifolds of these critical elements intersect transversally. As a consequence, for a dense set of admissible functions, the dynamical system is locally stable with respect of small perturbations (admissible or not). We also consider the set of "dissipative" mappings f of class C¹, the differential Df (x) of which is a positive cyclic Jacobi matrix at any point x. Such maps define a cooperative system. We show that the dynamical system generated by the equation x'(t)=f(x(t)) is generically Morse-Smale with respect to such mappings f, that is the system is Kupka-Smale, the critical elements are in finite number and the non-wandering set is equal to the set of critical elements. This property implies the structural stability of the dynamical system. Finally, in this thesis we also study coupled cell networks satisfying local symmetry constraints. For such systems, we first show generic results of observation, synchronization and phase shift. We use these properties to show the genericity of hyperbolicity of equilibrium points and an injectivity lemma for trajectories. In the proof of these genericity results, we use different Sard-Smale type theorems
Chen, Kai-hong, and 陳愷閎. "The Research Of Set Fire Offenses-To Breakthrough The Myth Of Dangerous Offense." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/23824707298333621110.
Повний текст джерелаHsieh, Yi-An, and 謝奕安. "Applying Alien Science Fiction Elements to Develop A Set of Toy Guns." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/03082036350554125615.
Повний текст джерела國立臺北教育大學
數位科技設計學系(含玩具與遊戲設計碩士班)
102
In the quest for amusement in modern life, toys and their function as well as the games they are used for, have become very important to a very wide range of people of all age groups. Toys for game playing and entertainment merchandise now occupy a significant position in the market. The selection of games and gaming devices is huge and diverse, but the pursuit of shooting as an amusement has become a massive segment and toy guns are remarkable in their variety and number. A modern toy gun can be made of many different kinds of material and can be of many different shapes and sizes. The type of game for which it is used and the game rules (Paint Ball, Water Gun, Laser gun for war games with computers, etc) will determine the function and the design. In these examples, a particular series of guns can become quite popular, and the appearance can be very similar to that of real weapons which presents very serious considerations for public security and can be problematical. Then there is the fashion element and the requirement for an impressive appearance which is very important for such toys. In this study, an attempt has been made to create toys that combine “alien sci-fi” elements into toy guns that will give the impression of an alien culture and high tech. These include guns with long barrels or short ones, and other alien looking equipment and even languages that are distinctive and give pleasure to the user, but at the same time do not result in the unwelcome and negative influence of a real gun. This study is based on reference materials which are “alien” elements and are combined with the appropriate toy guns to match a formal design process that allows the rapid development of prototypes. The aim being to combine a referential investigation with a formal design process and rapid prototype development that will be useful for designer’s in the future.
王文英. "A study on implementation of preservation metadata elements set for the archives of the institute of modern history, academia sinica." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/35431596771234578795.
Повний текст джерелаKo, Yin-chiao, and 柯尹喬. "An Exploratory Study of Brand Building Elements for Trendy Drama in Taiwan: A Case Study of SET's Trendy Drama." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/39101228854087191707.
Повний текст джерела世新大學
公共關係暨廣告學研究所(含碩專班)
98
Developing cultural creative industry is an efficient way to improve a country's world competitiveness, Korean drama's success is the best example. Taiwan's trendy drama has world competitiveness, however, enterprise in Taiwan lacked for managing brand in a long-term branding concept, which may reduce culture marketing and profits making's chance. In order to improve this difficult position, this research using a case study to analyze Taiwan's trendy drama's branding elements. By understanding case's branding strategy, brand's core value and key elements, hope the research result can provide a long-term brand managing strategy, and be a reference resource for trendy drama in Taiwan. The research result shows that SET's trendy drama's branding strategy is developing from inside out. "Brand identity" is playing a core roll in the branding process and becoming a foundation in developing SET's trendy drama, meanwhile, "brand identity" interacts with other 4 brand elements, which are "organization", "brand architectures", "brand-building plan" and "authorization".
Chang, Mei-Hwei, and 張美惠. "study on major and trace elements in mineral water --- Feasibility of using the geochemical characteristics to set up a source identification system." Thesis, 1998. http://ndltd.ncl.edu.tw/handle/38796133643493187254.
Повний текст джерелаRutherford, K., Conor J. Meehan, M. G. I. Langille, S. G. Tyack, J. C. McKay, N. L. McLean, K. Benkel, R. G. Beiko, and B. Benkel. "Discovery of an expanded set of avian leukosis subgroup E proviruses in chickens using Vermillion, a novel sequence capture and analysis pipeline." 2016. http://hdl.handle.net/10454/17493.
Повний текст джерелаTransposable elements (TEs), such as endogenous retroviruses (ERVs), are common in the genomes of vertebrates. ERVs result from retroviral infections of germ-line cells, and once integrated into host DNA they become part of the host's heritable genetic material. ERVs have been ascribed positive effects on host physiology such as the generation of novel, adaptive genetic variation and resistance to infection, as well as negative effects as agents of tumorigenesis and disease. The avian leukosis virus subgroup E family (ALVE) of endogenous viruses of chickens has been used as a model system for studying the effects of ERVs on host physiology, and approximately 30 distinct ALVE proviruses have been described in the Gallus gallus genome. In this report we describe the development of a software tool, which we call Vermillion, and the use of this tool in combination with targeted next-generation sequencing (NGS) to increase the number of known proviruses belonging to the ALVE family of ERVs in the chicken genome by 4-fold, including expanding the number of known ALVE elements on chromosome 1 (Gga1) from the current 9 to a total of 40. Although we focused on the discovery of ALVE elements in chickens, with appropriate selection of target sequences Vermillion can be used to develop profiles of other families of ERVs and TEs in chickens as well as in species other than the chicken.
Financial support was provided by the EW GROUP, as well as grants from the Canada Foundation for Innovation, Canada Research Chairs Program, and the Natural Sciences and Engineering Council of Canada to RGB, and Canada Institutes of Health Research funding to MGIL and CJM.
Blewitt, Darby K. "Utilization of elements of the nursing minimum data set for determining outcomes a report submitted in partial fulfillment ... for the degree of Master of Science (Nursing Administration) ... /." 1995. http://catalog.hathitrust.org/api/volumes/oclc/68798751.html.
Повний текст джерелаBlankenburg, René. "Entwicklung und Anwendung eines Softwaresystems zur Simulation des Wasserhaushalts und Stofftransports in variabel gesättigten Böden." 2019. https://tud.qucosa.de/id/qucosa%3A70665.
Повний текст джерелаThe soil zone, often referred to as root zone, aeration zone or unsaturated zone in the literature, is characterized by variably saturated conditions and is of particular importance in many disciplines. From the groundwater point of view, it is a zone for protection and buffering of environmental processes at the surface. Penetrating hazardous substances can be retarded or even completely decayed due to the transport, degradation and sorption processes which occur and thus, can prevent a contamination of the groundwater. In order to estimate potential threats to the groundwater based on a contaminated site or a damage, a leachate forecast is required in Germany according to the Federal Soil Protection Act (BBodSchG) and the Federal Soil Protection Ordinance (BBodSchV). The unsaturated zone takes on the function of the source and transport term for the pollutant. The source term function is used to describe the temporal discharge behavior of pollutants from the contaminant source with the leachate, the transport term describes the action path in the soil from the top of the site to the groundwater surface. The requirements and tasks of the BMBF-funded research project 'Prognosis of Pollutant Infiltration into Groundwater with Leachate' (“Prognose des Schadstoffeintrags in das Grundwasser mit dem Sickerwasser”) (SiWaP) motivated the development of the PCSiWaPro program. Within the project, the possibility should be created to be able to carry out a model-based leachate forecast with little effort, taking into account the research results from the SiWaP project. Commercially available software had to be left out, since the implementation of new processes, databases and parameters is not possible. At the same time, a total consideration of the complex processes taking place was necessary, as was the documentation of the input and output data to provide evidence. This led to the development of a graphical user interface (GUI) with an assistant that leads the user in 5 sequential steps to a physically based result including a protocol. All necessary input data are pre-assigned with useful values and checked for plausibility when changed by the user. At the same time, the functionality should not be limited to the possibilities of the assistant and the GUI must provide all available options of a numerical simulation to advanced users. The documentation of the input and output data is ensured by using databases. The GUI provides multiple languages for use in engineering offices, authorities or international projects. These requirements justified the development of a simulation system to be able to calculate the water balance and solute transport in unsaturated soils even under complex conditions. The PCSiWaPro program, emerged from the BMBF joint project SiWaP mentioned above, was an integral part of subsequent research projects, the results of which were incorporated into the further development of the program and expanded its fields of application outside of the leachate forecast. Required input data such as soil hydraulic and solute transport parameters are often subject to uncertainties or can only be captured in value ranges. In order to show such blurring in the calculation results of numerical simulations, the fuzzy set theory was used, which enables the uncertainties to be assigned using so-called α-cuts. The fluctuation range for each uncertain parameter can be defined individually and considered in the simulation. The blurring in the result is indicated by specifying the resulting minimum and maximum of the calculated quantity (pressure level, concentration). Using various sample applications, the problems presented in the thesis are dealt with by using PCSiWaPro. The thesis also gives an outlook on further research and development perspectives, which are derived from the results achieved in this thesis and the demands from the daily practice.:Abbildungsverzeichnis Tabellenverzeichnis Abkürzungsverzeichnis Symbolverzeichnis 1 Einleitung 2 Wasserhaushaltsberechnung in variabel gesättigten porösen Medien 2.1 Zugrundeliegende Gleichung 2.2 Numerische Lösung 3 Transport- und Umsetzungsprozesse 3.1 Erhaltungsgleichung 3.2 Transportprozesse 3.3 Umsetzungsprozesse 3.4 Basisgleichung für den Stofftransport in PCSiWaPro 3.5 Numerische Lösung 4 Entwicklung des Programms PCSiWaPro 4.1 Softwarearchitektur 4.2 Datenbankkonzept 4.3 Benutzeroberfläche für das Preprocessing 4.4 Ergebnisvisualisierung und Postprocessing 4.5 Parallelisierung des Rechenkernels 4.6 Dual-Porosität nach DURNER 4.7 Strömungsrandbedingung als zeitvariable Polygonfunktion 4.8 Berücksichtigung von Unsicherheiten in den Eingangsdaten 5 Anwendungsbeispiele 5.1 Deichdurchströmung 5.2 Modellgestützte Sickerwasserprognose mit unscharfen Eingangsdaten 5.3 Test der Parallelisierung am synthetischen Beispiel 5.4 Zusammenfassung Anwendungsbeispiele 6 Zusammenfassung und Ausblick 7 Literaturverzeichnis 8 Anhang
Маломуж, Сергій Ігорович, Сергей Игоревич Маломуж та Sergei I. Maloniuzh. "Малозначність діяння в кримінальному праві України". Thesis, 2017. http://hdl.handle.net/11300/7959.
Повний текст джерелаДисертація на здобуття наукового сту пеня кандидата юридичних наук за спеціальністю 12.00.08 - кримінальне право та кримінологія; кримінально- виконавче право. - Національний університет «Одеська юридична академія», Одеса, 2017. Дисертація є одним із перших у вітчизняній науці кримінального права спеціальним комплексним дослідженням малозначності діяння з ураху ванням законодавчого досвіду7 окремих зарубіжних країн. Досліджено генезис малозначності діяння в історії кримінального законодавства України, поняття та види малозначності діяння в теорії кримінального права. Визначено малозначність діяння за об’єктом посягання, а також за ознаками об'єктивної та суб’єктивної сторони. Відмежовано малозначність діяння від суміжних понять («відсутність складу злочину», «відсутність події злочину», «звільнення від кримінальної відповідальності», «обставини, що виключають злочинність діяння»), а також досліджено проблеми малозначності діяння в кримінальному судочинстві. Запропоновано удосконалити законодавче визначення поняття малозначності діяння та викласти частину другу ст. 11 КК України в наступній редакції: «Не є кримінальним правопорушенням дія або бездіяльність, які хоча формально і містять ознаки діяння, передбаченого цим Кодексом, але через малозначність не становлять необхідної для кримінального правопорушення суспільної небезпеки, тобто які не могли заподіяти істотної шкоди».
Диссертация на соискание научной степени кандидата юридических наук по специальности 12.00.08 - уголовное право и криминология; уголовно- исполнительное право. - Национальный университет «Одесская юридическая академия», Одесса, 2017. Диссертация является одним из первых специальных комплексных исследований малозначительности деяния в уголовном праве Украины, в котором изучен опыт других государств по определению признаков малозначительности деяния, а также предложены пути усовершенствования части 2 ст. 11 УК Украины. Исследованы генезис малозначительности деяния в истории уголовного законодательства Украины, понятие и виды малозначительности деяния в теории уголовного права. Определена малозначительность деяния по объекту посягательства, а также по признакам объективной и субъективной стороны. Разграничены малозначительность деяния от смежных понятий («отсутствие состава преступления», «отсутствие события преступления», «освобождение от уголовной ответственности», «обстоятельства, исключающие преступность деяния»), а также исследованы проблемы малозначительности деяния в уголовном судопроизводстве, перспективы совершенствования понятия малозначительного деяния. Предложено законодательное определение малозначительности деяния: «Не является уголовным правонарушением действие или бездействие, которое хотя формально и содержат признаки деяния, преду смотренного настоящим Кодексом, но в силу малозначительности, не представляет необходимой для уголовного правонару шения общественной опасности, то есть не могло причинить су щественного вреда».
Thesis for obtaining scientific degree of Candidate of Juridical Science, specialty 12.00.08 - criminal law and criminology: penal law. - The National University «Odessa Law Academy». Odessa. 2017. Dissertation is one of the special complex researches on insignificance of act in criminal law of Ukraine, where the experience of other countries in determining of the value and features of insignificance of act are analyzed for the first time, and it has been suggested the ways of improving its legislative term. It has been investigated the genesis of insignificance of act in the history of criminal law of Ukraine, concepts and types of insignificance of act in the theory of criminal law. the insignificance of act in the criminal law of other countries. In the criminal law of continental legal family the insignificance of act was enshrined as: 1) the reasons for the creation of preferred essential elements of offences (CC of Sweden); 2) the circumstances that exclude criminality of act (CC of Denmark); 3) the grounds for remission from punishment (the Criminal Code of Denmark); 4) the act that is not identified as a crime (CC of Switzerland); 5) grounds for bringing to administrative amenability (CC of Bulgaria). In the criminal legislation of the countries of the “former Soviet Union” the insignificance of act was confirmed as: 1) an act that is not considered as a crime (the most of countries); 2) the grounds for remission from criminal amenability (CC of Lithuania). The insignificance of act was identified as for the object of trespass, and for the features as the objective and subjective sides. It lias been proved that the degree of protection of the object of crime and the possibility of identifying the invasion for this object of the crime by the insignificant of act is in direct ratio correlated with the proximity of the object of criminal influence to the subjects of public relations as a stmctural element of the object of crime. In the legislation determination the insignificance of act the feature “... it was not caused significant damage to physical or legal persons, society or the state” describes the lack of socially dangerous result, and the feature “...it could cause significant damage to physical or legal persons, society or the state” describes the lack of public danger of acting. It is established that the act has been committed in a maimer that is a qualifying feature can not be considered the insignificant one. The insignificant of act can only be the acts which are committed with the intention causing by accidental damage. It has been investigated the division of insignificance of act from similar concepts (“the absence of essential elements of offence”, “the absence of the act of offence”. “ remission from criminal amenability”, “the circumstances that excluding criminality”), the problems of the insignificance of act in criminal judiciary. For solving problems in distinguishing between the concepts “ the absence of essential elements of offence” and “the insignificant of act” was proposed to delete from Ch. 2, Art. 11 Criminal Code of Ukraine that phrase as “... has not caused significant damage ...”. According to tins, it is proposed to write Ch. 2, Art. 11 Ukraine in the following way: “An action or inaction is not a criminal offense that although fonnally contains the signs of the act provided by this Code, but in accordance with insignificance they do not contain the public danger which is necessary for the criminal infraction of public insecurity, so that they could not cause any significant damage”.
Molefi, Zachariah Modise. "Exploring the understanding of routinely collected data by the health practitioners in a primary health care setting." Diss., 2014. http://hdl.handle.net/10500/18841.
Повний текст джерелаHealth Studies