Добірка наукової літератури з теми "Sensibilité au maillage"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Sensibilité au maillage".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Sensibilité au maillage":
Duchemin, M., and M. Lachance. "Analyse de sensibilité du modèle CEQÉROSS." Revue des sciences de l'eau 15, no. 4 (April 12, 2005): 789–807. http://dx.doi.org/10.7202/705481ar.
Fortin, J. P., R. Moussa, C. Bocquillon, and J. P. Villeneuve. "Hydrotel, un modèle hydrologique distribué pouvant bénéficier des données fournies par la télédétection et les systèmes d'information géographique." Revue des sciences de l'eau 8, no. 1 (April 12, 2005): 97–124. http://dx.doi.org/10.7202/705215ar.
Simon, François-Xavier, Julien Guillemoteau, Guillaume Hulin, Joachim Rimpot, Julien Thiesson, and Alain Tabbagh. "De nouvelles perspectives pour les applications des méthodes électromagnétiques basse fréquence en archéologie." Archimède. Archéologie et histoire ancienne 7 (June 9, 2020): 272–82. http://dx.doi.org/10.47245/archimede.0007.act.14.
Дисертації з теми "Sensibilité au maillage":
Carrier, Alexandre. "Sensibilité en mécanique des fluides : adaptation de maillage, turbulence et optimisation." Doctoral thesis, Université Laval, 2021. http://hdl.handle.net/20.500.11794/68166.
This thesis concerns the analysis of fluid mechanics by computer. The goal is to present new methodologies that allow controlling effectively and automatically parameters of the physical and numerical problem to obtain the results the engineer desires. These results are concrete needs as the performance of the system measured in terms of aerodynamic coefficients, energy losses, etc. To control the result, the flow simulation is not sufficient. The link between results and parameters is missing. A sensitivity analysis provides this information. If we do this analysis appropriately, its cost becomes marginal. First, the numerical estimate of the result must be reliable. Consequently, we give an new way to control effectively the error related to the spatial discretization necessary for this kind of computational methods. We use the sensitivity of the result with respect to the residuals of the physics equations. We are validating our new tools on laminar flows. Then we continue with turbulent flows. Once these quantities are well estimated numerically, the problem can be optimized virtually. Thus, the actual design improvement can be accelerated. In this work, geometric optimization is achieved. We present new ways to manage design constraints. We use the sensitivity of the result to wall perturbations.
Resmini, Andrea. "Analyse de sensibilité pour la simulation numérique des écoulements compressibles en aérodynamique externe." Thesis, Paris 6, 2015. http://www.theses.fr/2015PA066529.
Sensitivity analysis for the numerical simulation of external aerodynamics compressible flows with respect to the mesh discretization and to the model input parametric uncertainty has been addressed respectively 1- through adjoint-based gradient computation techniques and 2- through non-intrusive stochastic approximation methods based on sparse grids. 1- An enhanced goal-oriented mesh adaptation method based on aerodynamic functional total derivatives with respect to mesh coordinates in a RANS finite-volume mono-block and non-matching multi-block structured grid framework is introduced. Applications to 2D RANS flow about an airfoil in transonic and detached subsonic conditions for the drag coefficient estimation are presented. The asset of the proposed method is patent. 2- The generalized Polynomial Chaos in its sparse pseudospectral form and stochastic collocation methods based on both isotropic and dimension-adapted sparse grids obtained through an improved dimension-adaptivity method driven by global sensitivity analysis are considered. The stochastic approximations efficiency is assessed on multi-variate test functions and airfoil viscous aerodynamics simulation in the presence of geometrical and operational uncertainties. Integration of achievements 1- and 2- into a coupled approach in future work will pave the way for a well-balanced goal-oriented deterministic/stochastic error control
Resmini, Andrea. "Analyse de sensibilité pour la simulation numérique des écoulements compressibles en aérodynamique externe." Electronic Thesis or Diss., Paris 6, 2015. http://www.theses.fr/2015PA066529.
Sensitivity analysis for the numerical simulation of external aerodynamics compressible flows with respect to the mesh discretization and to the model input parametric uncertainty has been addressed respectively 1- through adjoint-based gradient computation techniques and 2- through non-intrusive stochastic approximation methods based on sparse grids. 1- An enhanced goal-oriented mesh adaptation method based on aerodynamic functional total derivatives with respect to mesh coordinates in a RANS finite-volume mono-block and non-matching multi-block structured grid framework is introduced. Applications to 2D RANS flow about an airfoil in transonic and detached subsonic conditions for the drag coefficient estimation are presented. The asset of the proposed method is patent. 2- The generalized Polynomial Chaos in its sparse pseudospectral form and stochastic collocation methods based on both isotropic and dimension-adapted sparse grids obtained through an improved dimension-adaptivity method driven by global sensitivity analysis are considered. The stochastic approximations efficiency is assessed on multi-variate test functions and airfoil viscous aerodynamics simulation in the presence of geometrical and operational uncertainties. Integration of achievements 1- and 2- into a coupled approach in future work will pave the way for a well-balanced goal-oriented deterministic/stochastic error control
Vincent, Hugo. "Simulations et analyses de sensibilité du bruit produit des écoulements cisaillés." Electronic Thesis or Diss., Ecully, Ecole centrale de Lyon, 2024. http://www.theses.fr/2024ECDL0007.
In this PhD work, sensitivity studies are carried out for turbulent shear flows using direct noise computations and the complex differentiation method.First, the complex differentiation method is applied to two-dimensional mixing layers to investigate its capacity to highlight the effects of a parameter on the aerodynamic noise.For that, direct numerical simulations of mixing layers are performed using this method for different Mach numbers, Reynolds numbers and mesh spacings.In each case, the derivatives of the noise levels with respect to one of the three parameters are obtained using the complex differentiation method.The results are in good agreement with others from the literature and parametric studies.They indicate that the complex differentiation method can be used to describe the effects of physical parameters and of the grid resolution on the sound produced by a high-speed flow.Secondly, the complex differentiation method is applied to the study of the receptivity mechanism occurring when an acoustic wave reflects at the nozzle lip of a jet.For this purpose, using the results of a simulation of a jet impinging on a plate, an imaginary amplitude acoustic pulse is introduced at a given time in the near-nozzle region outside the jet.The sensitivity of the near-nozzle mixing layers to an acoustic disturbance is then determined using the complex differentiation method.This sensitivity is used to highlight the excitation of an instability wave by the acoustic disturbance.Finally, the influence of nozzle-exit conditions (velocity profile and turbulence level) on the tonal noise components generated by subsonic impinging jets is investigated.For that, jets with different nozzle-exit velocity profiles, several boundary-layer excitation levels, at Mach numbers of 0.6 or 0.9, impinging on a plate located at 6 or 8 nozzle radii from the nozzle, are simulated.The results show that the nozzle-exit conditions significantly affect the amplitude of the tonal noise components and that impinging jets at Mach numbers below 0.65, which are generally non-resonant, can be resonant for specific nozzle-exit conditions.The effects of the nozzle-exit conditions are found to result from changes in the development of the jet mixing layers, which lead to differences in the amplification properties of the Kelvin-Helmholtz instability waves between the nozzle and the plate, and in the energy contained in the coherent structures of the jets near the impingement region
Murea, Cornel Marius. "Couplage d'équations et résolution numérique des problèmes d'interaction fluide-structure." Habilitation à diriger des recherches, Université de Haute Alsace - Mulhouse, 2007. http://tel.archives-ouvertes.fr/tel-00167976.
Le fil directeur de mes travaux est de prendre comme ``contrôle'' une partie des conditions aux limites à l'interface et ``d'observer'' si les conditions de couplage sont vérifiées. En traitant l'observation par la méthode de moindres carrés, on obtient des problèmes de type contrôle optimal. Dans le chapitre 1, on prouve que la fonction coût est semi-continue inférieurement et en conséquence, on peut démontrer l'existence d'un contrôle optimal. On prouve la différentiabilité de la fonction coût, et on donne la forme analytique du gradient dans le chapitre 2. On présente également des résultats numériques. Dans le chapitre 3 on étudie la sensibilité du problème et on donne la forme analytique du gradient sans faire appel à l'état adjoint. Des résultats numériques sont obtenus. Dans le chapitre 4, pour résoudre le problème du fluide, on prescrit la composante normale de la vitesse du fluide et la composante normale des forces de surface. C'est une formulation rarement utilisée pour résoudre les équations de Stokes. On cherche à minimiser la composante tangentielle de la vitesse du fluide à l'interface. On prouve que le problème fluide est bien défini et on présente des résultats numériques. Dans le chapitre 5, on introduit un algorithm où on doit résoudre à chaque pas de temps un problème de minimisation. C'est un algorithme bien adapté notamment quand le fluid est pulsatif. On présente des résultats numériques pour des pas de temps relativement grand.
Un résultat de convergence concernant un algorithme pour des maillages dynamiques est présenté dans le chapitre 6. Dans les chapitres 7 et 8, on veut déterminer numériquement l'évolution d'un domaine bidimensionnel avec application au développement cellulaire. L'écoulement du fluide dans le domaine en mouvement dépend de la tension de surface à la frontière libre. Cette tension est proportionnelle à la courbure de la frontière. Les algorithmes employés sont de type ``front-tracking''. Des résultats numériques sont présentés.
Ben, tahar Mehdi. "Contribution à l'étude et la simulation du procédé l'hydroformage." Phd thesis, École Nationale Supérieure des Mines de Paris, 2005. http://pastel.archives-ouvertes.fr/pastel-00001532.
Valentin, Vincent. "Optimisation aérodynamique 3-D des aubages dans les turbomachines axiales multi-étages." Paris 6, 2002. http://www.theses.fr/2002PA066360.
Lorant, Virginie. "Sensibilité de la convection et de la mousson indienne à la résolution dans un modèle de climat à maille variable." Université Joseph Fourier (Grenoble), 2000. http://www.theses.fr/2000GRE10044.
Nguyen, Thanh Nam. "Calculs éléments finis paramétrés à l'aide des dérivés d'ordre élevé : applications à l'électromagnétisme." Grenoble INPG, 1998. http://www.theses.fr/1998INPG0096.
Descroix, Cannie Claire. "Optimisation de forme des structures à partir d'un grand code éléments finis." Grenoble INPG, 1989. http://www.theses.fr/1989INPG0125.